ALUMINUM ELECTROLYTIC CAPACITORS CD Chip Type, Low Impedance series Chip type, low impedance temperature range up to +105C. Designed for surface mounting on high density PC board. Applicable to automatic mounting machine fed with carrier tape. Compliant to the RoHS directive (2011/65/EU). CD Low Impedance CL Low Impedance UD Specifications Item Performance Characteristics Category Temperature Range - 55 to +105C Rated Voltage Range 6.3 to 100V Rated Capacitance Range 1 to 3300F Capacitance Tolerance 20% at 120Hz, 20C Leakage Current After 2 minutes' application of rated voltage, leakage current is not more than 0.01 CV or 3 (A), whichever is greater. Measurement frequency : 120Hz at 20C 6.3 0.26 Rated voltage (V) tan (MAX.) Tangent of loss angle (tan ) 10 0.19 16 0.16 25 0.14 35 0.12 50 0.10 63 0.08 80 0.08 100 0.07 For capacitance of more than 1000F, add 0.02 for every increase of 1000F. Measurement frequency : 120Hz Rated voltage (V) 6.3 10 16 25 35 50 63 80 100 2 2 2 2 2 2 2 2 2 3 3 3 3 3 3 3 3 3 4 4 4 3 3 3 3 3 3 Z--25C / Z+20C Impecance ratio Z--40C / Z+20C ZT / Z20 (MAX.) Z--55C / Z+20C Stability at Low Temperature The specifications listed at right shall be met when the capacitors are restored to 20C after the rated voltage is applied for 5000 hours (2000 hours for L 10 mm: 50V or less, and for L 10mm: 63V or more) at 105C. Endurance Capacitance Change Within 30% of the initial capacitance value tan 200% or less than the initial specified value 300% or less than the initial specified value for 63V or more Leakage current Less than or equal to the initial specified value Shelf Life After storing the capacitors under no load at 105C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20C, they shall meet the specified values for the endurance characteristics listed above. Resistance to soldering heat The capacitors are kept on a hot plate for 30 seconds, which is maintained at 250C. The capacitors shall meet the characteristic requirements listed at right when they are removed from the plate and restored to 20C. Marking Black print on the case top. Chip Type Less than or equal to the initial specified value Leakage current Less than or equal to the initial specified value E L0.3 Capacitance H 1 2 3 4 5 6 7 8 9 Capacitance tolerance (20%) A0.2 A0.2 E Negative C0.2 E B0.2 D0.5 L1.0 Series H Negative 8 x 10L, 10 x 10L, 12.5 x 13.5L, 16 x 16.5L, 18 x 16.5L : The vibration structure-resistant product is also available upon request, please ask for details. Dimension table in next page. A0.2 A0.2 Positive 0.3 MAX. Pressure relief vent Capacitance Series name H 2 : Except : 10 x 7.7L Lot No. 330 F CD 50V H1015 nichicon Trade mark L0.5 Plastic platform Voltage Rated voltage (16V) 0.5 MAX. Pressure 2 relief vent Capacitance (12.5 to 18) C0.2 B0.2 D0.5 A2 220E CD Trade mark Lot No. Rated capacitance (100F) 0.5 MAX. Plastic platform 0.3 MAX. Series Code GS MS ZD Size code Configuration Negative Positive Voltage ( E : 25V ) Package code Size Package 4 to 10 Taping 12.5 to 18 Taping 12.5 to 18 Tray 1: Size 8 x 6.2 only (8 x 10, 10) 10 11 12 13 14 UCD 1 C 1 0 1 M C L 1 GS A0.2 A0.2 C0.2 B0.2 A2 47 j CD D0.5 Series 0.5 MAX. Positive Plastic platform 0.3 MAX. Voltage ( j : 6.3V ) Lot No. Within 10% of the initial capacitance value tan Type numbering system (Example : 16V 100F) (4 to 8 x 6.2) 1 Trade mark Capacitance Change Type D Code 4 to 6.3 CL 8 (6.2L) CL 10(7.7L) CL 8 (10L) * NL 10(10L,13.5L) 12.5 to 18 DxL A B C E L H DxL A B C E L H 4 x 5.8 5 x 5.8 6.3 x 5.8 6.3 x 7.7 8 x 6.2 8 x 10 10 x 7.7 10 x 10 NQ (mm) 3.3 2.9 3.2 3.2 1.8 2.1 2.4 2.4 8.3 10.3 8.3 10.3 4.3 5.3 6.6 6.6 8.3 8.3 10.3 10.3 4.3 5.3 6.6 6.6 2.3 3.1 4.5 4.5 1.0 1.3 2.2 2.2 6.2 10 7.7 10 5.8 5.8 5.8 7.7 0.5 to 0.8 0.5 to 0.8 0.5 to 0.8 0.5 to 0.8 0.5 to 0.8 0.8 to 1.1 0.8 to 1.1 0.8 to 1.1 10 x 13.5 12.5 x 13.5 16 x 16.5 18 x 16.5 3.2 4.8 5.4 6.4 10.3 13.6 17.1 19.1 10.3 13.6 17.1 19.1 4.5 4.0 6.3 6.3 13.5 13.5 16.5 16.5 0.8 to 1.1 1.0 to 1.4 1.0 to 1.4 1.0 to 1.4 Voltage V 6.3 10 16 25 35 50 63 80 100 Code j A C E V H J K 2A CAT.8100D ALUMINUM ELECTROLYTIC CAPACITORS CD series Dimensions Cap. (F) V 6.3 10 16 25 35 50 Code 0J 1A 1C 1E 1V 1H 1 010 4 x 5.8 2.70 60 2.2 2R2 4 x 5.8 2.70 60 3.3 3R3 4 x 5.8 2.70 60 4.7 4R7 60 10 100 4 x 5.8 1.35 90 4 x 5.8 1.35 90 15 150 4 x 5.8 1.35 90 5 x 5.8 0.70 160 4 x 5.8 1.35 90 5 x 5.8 0.70 160 5 x 5.8 0.70 160 5 x 5.8 0.70 160 6.3 x 5.8 0.36 240 5 x 5.8 0.70 160 6.3 x 5.8 0.36 240 22 220 4 x 5.8 1.35 90 4 x 5.8 1.35 90 27 270 4 x 5.8 1.35 90 5 x 5.8 0.70 160 4 x 5.8 1.35 90 5 x 5.8 0.70 160 33 330 5 x 5.8 0.70 160 4 x 5.8 1.35 90 5 x 5.8 0.70 160 47 470 56 560 5 x 5.8 0.70 68 680 6.3 x 5.8 5 x 5.8 6.3 x 5.8 100 101 160 6.3 x 5.8 0.36 240 6.3 x 5.8 0.36 240 6.3 x 5.8 0.36 0.36 240 6.3 x 5.8 0.36 240 6.3 x 5.8 0.36 0.70 160 0.36 240 240 220 221 6.3 x 5.8 0.36 240 330 331 6.3 x 7.7 0.32 8 x 6.2 0.26 390 391 1000 0.70 160 0.36 681 5 x 5.8 240 6.3 x 5.8 680 240 0.36 151 471 0.36 6.3 x 5.8 150 470 6.3 x 5.8 6.3 x 5.8 0.36 240 6.3 x 5.8 0.36 1.35 90 5 x 5.8 1.50 90 5 x 5.8 0.70 160 6.3 x 5.8 0.86 170 5 x 5.8 0.70 160 6.3 x 5.8 0.86 170 6.3 x 5.8 0.36 240 6.3 x 7.7 0.66 195 8 x 6.2 0.63 200 6.3 x 7.7 0.66 195 8 x 6.2 0.63 200 240 6.3 x 7.7 0.32 290 290 6.3 x 7.7 0.32 290 8 x 10 0.32 350 0.26 300 8 x 10 0.16 600 10 x 7.7 0.36 330 8 x 10 0.16 600 8 x 10 0.16 600 10 x 7.7 0.18 600 10 x 7.7 0.18 600 10 x 10 0.16 700 10 x 10 0.16 700 240 6.3 x 5.8 0.36 240 240 6.3 x 5.8 0.36 6.3 x 7.7 0.32 8 x 6.2 240 6.3 x 7.7 0.32 290 6.3 x 7.7 0.32 290 6.3 x 7.7 0.32 290 8 x 10 0.16 600 8 x 10 0.16 600 8 x 6.2 0.26 300 8 x 6.2 0.26 300 10 x 7.7 0.18 600 10 x 7.7 0.18 600 290 8 x 10 0.16 600 8 x 10 0.16 600 300 10 x 7.7 0.18 600 10 x 7.7 0.18 600 8 x 10 0.16 600 10 x 10 0.08 850 600 8 x 10 0.16 600 8 x 10 0.16 600 10 x 7.7 0.18 600 10 x 7.7 0.18 600 10 x 7.7 0.18 600 10 x 10 0.08 850 10 x 10 0.08 850 0.16 600 0.18 600 102 8 x 10 0.16 600 10 x 10 0.08 850 10 x 13.5 0.08 1500 152 10 x 10 0.08 850 10 x 13.5 0.08 950 12.5 x 13.5 0.08 2200 222 10 x 13.5 0.08 0.08 1100 3300 332 12.5 x 13.5 0.08 V 63 80 Cap. (F) Code 1J 1K 3.3 3R3 4.7 4R7 950 12.5 x 13.5 10 x 10 0.08 850 10 x 13.5 0.08 950 950 12.5 x 13.5 0.08 1100 50 1.50 80 6.3 x 7.7 1.20 120 8 x 6.2 1.20 120 0.08 950 12.5 x 13.5 0.08 1100 12.5 x 13.5 0.08 1100 10 x 13.5 10 x 13.5 0.14 800 12.5 x 13.5 0.12 900 12.5 x 13.5 0.12 900 16 x 16.5 0.073 1610 16 x 16.5 0.073 1610 16 x 16.5 0.035 1800 1100 16 x 16.5 0.035 1800 1100 6.3 x 5.8 Case size Rated Impedance D x L ripple (mm) 100 2A 5 x 5.8 5.00 25 6.3 x 5.8 3.00 40 6.3 x 7.7 2.40 60 8 x 6.2 2.40 60 8 x 10 1.30 130 22 220 33 330 8 x 10 0.65 250 8 x 10 1.30 47 470 8 x 10 0.65 250 10 x 10 0.70 68 680 10 x 10 0.35 400 12.5 x 13.5 100 101 10 x 10 0.35 150 151 12.5 x 13.5 220 221 12.5 x 13.5 330 331 470 471 16 x 16.5 0.082 1410 680 681 18 x 16.5 8 x 10 1.30 130 130 10 x 10 0.70 200 200 12.5 x 13.5 0.32 500 0.32 500 12.5 x 13.5 0.32 500 400 12.5 x 13.5 0.32 500 16 x 16.5 0.17 793 0.16 800 12.5 x 13.5 0.32 500 16 x 16.5 0.17 793 0.16 800 18 x 16.5 0.15 917 0.15 917 0.08 4 x 5.8 0.36 8 x 10 100 2.70 6.3 x 5.8 10 x 7.7 10 4 x 5.8 240 240 0.16 3.00 90 0.36 0.36 8 x 10 5 x 5.8 1.35 6.3 x 5.8 6.3 x 5.8 240 4 x 5.8 16 x 16.5 0.17 793 18 x 16.5 18 x 16.5 0.15 917 Case size Rated Impedance D x L ripple (mm) 1690 Max. Impedance ( ) at 20C 100kHz, Rated ripple current (mArms) at 105C 100kHz : In this case, 6 will be put at 12th digit of type numbering system. Frequency coefficient of rated ripple current Frequency 50Hz 120Hz 300Hz 1kHz 10kHz or more Coefficient 0.35 0.50 0.64 0.83 1.00 Taping specifications are given in page 23. Recommended land size, soldering by refrow are given in page 18, 19. Please refer to page 3 for the minimum order quantity. CAT.8100D Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Nichicon: UCD0J101MCL6GS UCD0J331MCL6GS UCD0J470MCL6GS UCD1A221MCL6GS UCD1A330MCL6GS UCD1C220MCL6GS UCD1C221MCL6GS UCD1C470MCL6GS UCD1E101MCL6GS UCD1E330MCL6GS UCD1H100MCL6GS UCD1H330MCL6GS UCD1H470MCL6GS UCD1J220MCL6GS UCD1K100MCL6GS UCD1V100MCL6GS UCD1V101MCL6GS UCD0J101MCL1GS UCD0J102MNL1GS UCD0J152MNL1GS UCD0J220MCL1GS UCD0J221MCL1GS UCD0J331MCL1GS UCD0J470MCL1GS UCD0J471MNL1GS UCD1A102MNL1GS UCD1A151MCL1GS UCD1A220MCL1GS UCD1A221MCL1GS UCD1A330MCL1GS UCD1A331MNL1GS UCD1A471MNL1GS UCD1A681MNL1GS UCD1C100MCL1GS UCD1C101MCL1GS UCD1C151MCL1GS UCD1C220MCL1GS UCD1C221MCL1GS UCD1C331MNL1GS UCD1C470MCL1GS UCD1C471MNL1GS UCD1C681MNL1GS UCD1E100MCL1GS UCD1E101MCL1GS UCD1E151MNL1GS UCD1E220MCL1GS UCD1E221MNL1GS UCD1E330MCL1GS UCD1E331MNL1GS UCD1E470MCL1GS UCD1E471MNL1GS UCD1E680MCL1GS UCD1H100MCL1GS UCD1H101MNL1GS UCD1H151MNL1GS UCD1H220MCL1GS UCD1H221MNL1GS UCD1H330MCL1GS UCD1H4R7MCL1GS UCD1H470MCL1GS UCD1J100MCL1GS UCD1J101MNL1GS UCD1J220MCL1GS UCD1J330MNL1GS UCD1J4R7MCL1GS UCD1J470MNL1GS UCD1J680MNL1GS UCD1K100MCL1GS UCD1K220MNL1GS UCD1K3R3MCL1GS UCD1K330MNL1GS UCD1K4R7MCL1GS UCD1K470MNL1GS UCD1V100MCL1GS UCD1V101MNL1GS UCD1V151MNL1GS UCD1V220MCL1GS UCD1V221MNL1GS UCD1V330MCL1GS UCD1V331MNL1GS UCD1V4R7MCL1GS UCD1V470MCL1GS UCD1V471MNQ1MS UCD1V680MCL1GS UCD1V681MNQ1MS UCD2A101MNQ1MS UCD2A151MNQ1MS UCD2A220MNL1GS UCD2A221MNQ1MS UCD2A330MNL1GS UCD2A331MNQ1MS UCD2A470MNQ1MS UCD2A680MNQ1MS UCD1H681MNQ1MS UCD1E102MNQ1MS UCD1E222MNQ1MS UCD1H331MNQ1MS UCD1H471MNQ1MS UCD1J471MNQ1MS UCD1J221MNQ1MS