EVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet Reverse Package Top View LEDs 67-21SYGC/S530-XX/TR10 Features P-LCC-2 package. White package. Optical indicator. Colorless clear window. Wide viewing angle. Suitable for vapor-phase reflow, Infrared reflow and wave solder processes. Computable with automatic placement equipment. Available on tape and reel (8mm Tape). Pb-free. The product itself will remain within RoHS compliant version. Descriptions The 67-21 series is available in soft orange, green,blue and yellow. Due to the package design, the LED has wide viewing angle and optimized light coupling by inter reflector. This feature makes the SMT TOP LED ideal for light pipe application. The low current requirement makes this device ideal for portable equipment or any other application where power is at a premium. Applications Automotive: backlighting in dashboard and switch. Telecommunication: indicator and backlighting in telephone and fax. Flat backlight for LCD, switch and symbol. Light pipe application. General use. Device Selection Guide Chip Material Emitted Color AlGaInP Brilliant Yellow Green Everlight Electronics Co., Ltd. Device No. : Lens Color Water Clear http://www.everlight.com prepared date: 29-Jul-2005 Rev. 3 Page: 1 of 10 Prepared by: Forrest Chen EVERLIGHT ELECTRONICS CO.,LTD. 67-21SYGC/S530-XX/TR10 Package Dimensions CL - + Polarity For reflow soldering (propose) Note : Tolerances dimension 0.1 unless otherwise noted Unit : mm Everlight Electronics Co., Ltd. Device No. : http://www.everlight.com prepared date: 29-Jul-2005 Rev. 3 Page: 2 of 10 Prepared by: Forrest Chen EVERLIGHT ELECTRONICS CO.,LTD. 67-21SYGC/S530-XX/TR10 Absolute Maximum Ratings (Ta=25) Parameter Symbol Rating Unit Reverse Voltage VR 5 V Forward Current IF 25 mA Operating Temperature Topr -40 ~ +85 Storage Temperature Tstg -40 ~ +90 Electrostatic Discharge ESD 2000 V Power Dissipation Pd 60 mW IFP 60 mA Peak Forward Current (Duty 1/10 @1KHz) Reflow Soldering : 260 for 10 sec. Soldering Temperature Everlight Electronics Co., Ltd. Device No. : Tsol Hand Soldering : 350 for 3 sec. http://www.everlight.com prepared date: 29-Jul-2005 Rev. 3 Page: 3 of 10 Prepared by: Forrest Chen EVERLIGHT ELECTRONICS CO.,LTD. 67-21SYGC/S530-XX/TR10 Electro-Optical Characteristics (Ta=25) Parameter Luminous Intensity Symbol *Chip Rank Min. Typ. Max. E2 16 22 ----- E3 25 37 ----- IV E4 32 51 ----- E5 40 63 ----- Unit Condition mcd IF=20mA Viewing Angle 21/2 ----- ----- 120 ----- deg IF=20mA Peak Wavelength p ----- ----- 575 ----- nm IF=20mA Dominant Wavelength Spectrum Radiation Bandwidth d ----- ----- 573 ----- nm IF=20mA ----- ----- 20 ----- nm IF=20mA Forward Voltage VF ----- ----- 2.0 2.4 V IF=20mA Reverse Current IR ----- ----- ----- 10 A VR=5V *67-21SYGC/S530-XX/TR10 Chip Rank Everlight Electronics Co., Ltd. Device No. : http://www.everlight.com prepared date: 29-Jul-2005 Rev. 3 Page: 4 of 10 Prepared by: Forrest Chen EVERLIGHT ELECTRONICS CO.,LTD. 67-21SYGC/S530-XX/TR10 Typical Electro-Optical Characteristics Curves Everlight Electronics Co., Ltd. Device No. : http://www.everlight.com prepared date: 29-Jul-2005 Rev. 3 Page: 5 of 10 Prepared by: Forrest Chen EVERLIGHT ELECTRONICS CO.,LTD. 67-21SYGC/S530-XX/TR10 Label explanation CAT: Luminous Intensity Rank HUE: Dom. Wavelength Rank REF: Forward Voltage Rank Reel Dimensions Note: Tolerances Unless Dimension 0.1mm , Unit = mm Everlight Electronics Co., Ltd. Device No. : http://www.everlight.com prepared date: 29-Jul-2005 Rev. 3 Page: 6 of 10 Prepared by: Forrest Chen EVERLIGHT ELECTRONICS CO.,LTD. 67-21SYGC/S530-XX/TR10 Carrier Tape Dimensions: Loaded quantity 2000 PCS per reel Note: Tolerances Unless Dimension 0.1mm ,Unit = mm Moisture Resistant Packaging Label Aluminum moisture-proof bag Everlight Electronics Co., Ltd. Device No. : http://www.everlight.com prepared date: 29-Jul-2005 Desiccant Label Rev. 3 Page: 7 of 10 Prepared by: Forrest Chen EVERLIGHT ELECTRONICS CO.,LTD. 67-21SYGC/S530-XX/TR10 Reliability Test Items And Conditions The reliability of products shall be satisfied with items listed below. Confidence level90% LTPD10% Test Sample Ac/Re Hours/Cycles Size No. Items Test Condition 1 Reflow Soldering Temp. : 2605 Min. 5sec. 6 Min. 22 PCS. 0/1 Temperature Cycle H : +100 15min 5 min L : -40 15min 300 Cycles 22 PCS. 0/1 3 Thermal Shock H : +100 5min 10 sec L : -10 5min 300 Cycles 22 PCS. 0/1 4 High Temperature Storage Temp. : 100 22 PCS. 0/1 5 Low Temperature Storage Temp. : -40 22 PCS. 0/1 22 PCS. 0/1 2 1000 Hrs. 1000 Hrs. 1000 Hrs. 6 7 DC Operating Life High Temperature / High Humidity Everlight Electronics Co., Ltd. Device No. : IF = 20 mA 85/ 85%RH http://www.everlight.com prepared date: 29-Jul-2005 1000 Hrs. 22 PCS. Rev. 3 0/1 Page: 8 of 10 Prepared by: Forrest Chen EVERLIGHT ELECTRONICS CO.,LTD. 67-21SYGC/S530-XX/TR10 Precautions For Use 1. Over-current-proof Customer must apply resistors for protection, otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package: The LEDs should be kept at 30 or less and 90%RH or less. 2.3 After opening the package: The LED's floor life is 1 year under 30 deg C or less and 60% RH or less. If unused LEDs remain, it should be stored in moisture proof packages. 2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment : 605 for 24 hours. 3. Soldering Condition 3.1 Pb-free solder temperature profile 3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board. 4.Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350 for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. Everlight Electronics Co., Ltd. Device No. : http://www.everlight.com prepared date: 29-Jul-2005 Rev. 3 Page: 9 of 10 Prepared by: Forrest Chen EVERLIGHT ELECTRONICS CO.,LTD. 67-21SYGC/S530-XX/TR10 5.Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing. EVERLIGHT ELECTRONICS CO., LTD. Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Tucheng, Taipei 236, Taiwan, R.O.C Everlight Electronics Co., Ltd. Device No. : Tel: 886-2-2267-2000, 2267-9936 Fax: 886-2267-6244, 2267-6189, 2267-6306 http://www.everlight.com http://www.everlight.com prepared date: 29-Jul-2005 Rev. 3 Page: 10 of 10 Prepared by: Forrest Chen