SPECIFICATION * Samsung P/N : CL21A106KPCLQNC CAP, 10 , 10%, 10V, X5R, 0805 * Description : * Supplier : Samsung electro-mechanics * Product : Multi-layer Ceramic Capacitor A. Samsung Part Number Series Size Dielectric Capacitance Capacitance tolerance Rated Voltage Thickness CL 21 A 106 K P C L Q N C Samsung Multi-layer Ceramic Capacitor 0805 (inch code) L: 2.0 0.15 1.25 0.15 mm W: Thickness division Inner electrode X5R 10 10 % 10 V 0.85 0.1 mm mm Low profile Ni Termination Cu Plating Sn 100% (Pb Free) Product Special L,W size tolerance change code Packaging Cardboard Type, 7" reel Reserved for future use B. Samsung Reliablility Test and Judgement condition Performance 1.00.2Vrms Rated Voltage 60~120 sec. Resistance 10,000Mohm or 100Mohm Whichever is Smaller Appearance No abnormal exterior appearance Withstanding No dielectric breakdown or Microscope (x10) 250% of the rated voltage Voltage mechanical breakdown Temperature X5R Characterisitcs Adhesive Strength (From -55 to 85, Capacitance change shoud be within 15%) No peeling shall be occur on the 500gF, for 101 sec. of Termination terminal electrode Bending Strength Capacitance change : Tan (DF) Insulation Within specified tolerance Test condition 110% Capacitance 0.1 max. within 12.5% Bending to the limit (1mm) with 1.0mm/sec. Solderability More than 75% of terminal surface SnAg3.0Cu0.5 solder is to be soldered newly 2455, 30.3sec. (preheating : 80~120 for 10~30sec.) Resistance to Capacitance change : Soldering heat Tan , IR : initial spec. within 7.5% Solder pot : 2705, 101sec. Performance Vibration Test Capacitance change : within 5% Test condition Amplitude : 1.5mm Tan , IR : initial spec. From 10 to 55 (return : 1min.) Moisture Capacitance change : 2hours x 3 direction (x, y, z) With rated voltage Resistance Tan : IR : High Temperature Resistance 0.2 max Tan : 402, 90~95%RH, 500+12/-0hrs 12.5* or Over Capacitance change : IR : within 12.5% within 12.5% 0.2 max With 100% of the rated voltage Max. operating temperature 25* or Over 1000+48/-0hrs Temperature Capacitance change : Cycling Tan , IR : initial spec. within 7.5% 1 cycle condition Min. operating temperature 25 Max. operating temperature 25 5 cycle test C. Recommended Soldering method : Reflow ( Reflow Peak Temperature : 260+0/-5, 10sec. Max ) * For the more detail Specification, Please refer to the Samsung MLCC catalogue.