SMD CHIP VARISTORS CHIP VARISTOR FEATURES * * * * * * * SMD type chip varistors are highly reliable in surface mount applications. Wide operating voltage range. Large withstanding surge current and energy at small size Suitable for high speed signal line due to small capacitance Excellent solderability and superior heat resistance Ag base terminal electrodes with Ni + Sn-Pb electroplating No asymmetrical degradation as with bismuth zinc oxide varistors CHIP VARISTOR APPLICATIONS Typical Applications: Information and communication equipment Signal line of cellular phones Transient voltage protection for ICs and transistors ESD and I/O protection Overall telecommunication transient protection TYPICAL APPLICATION EXAMPLES 15191 Bledsoe St., Sylmar, CA 91342 Tel (818) 364-9800 * Fax (818) 364-6100 Varistors Page 2 of 14 HOW TO ORDER Chip Varistors ICVN 05 05 X 1 2 3 4 150 P B 5 6 7 1 SERIES NAME PRODUCT NAME CODE ICVN ICVL Normal type chip varistor Low capacitance type chip varistor CODE 05 10 21 31 SIZE in MM (inches) 1.0 X 0.5 (.040 x .020) 1.6 X 0.8 (.063 x .031) 2.0 X1.25 (.079 x .050) 3.2 X 1.6 (.126 x .063) 2 SIZE DESIGNATOR 3 WORKING VOLTAGE CODE 03 05 09 12 14 VOLTAGE (VDC) CODE A C D F G ENERGY (J) CODE 100 150 200 250 300 390 400 VOLTAGE (V) 3.3 5.6 9.0 12.0 14.0 CODE 18 26 30 48 60 VOLTAGE (VDC) CODE H J P V X ENERGY (J) CODE 500 560 580 620 650 101 121 VOLTAGE (V) 18.0 26.0 30.0 48.0 60.0 4 ENERGY 0.1 0.3 0.4 0.7 0.9 1.2 1.5 3.0 0.02 0.05 5 CLAMPING VOLTAGE 10.0 15.5 20.0 25.0 30.0 39.0 40.0 50.0 56.0 58.0 62.0 65.0 100.0 120.0 6 TERMINATION TYPE TYPE CODE S P Solderable (Ag/Pd/Pt) Electroplate (Ni Sn) CODE B R E Bulk Case Packaging Paper Tape & Reel pack Embossed Plastic Tape & Reel pack 7 PACKAGING TYPE TYPE P/N Example: ICVN0518X400SE 15191 Bledsoe St., Sylmar, CA 91342 Tel (818) 364-9800 * Fax (818) 364-6100 Varistors Page 3 of 14 CHIP VARISTOR CONFIGURATION AND DIMENSIONS 05 DIMENSIONS in mm (inch) CHIP SIZE CODE CODE EIA METRIC 0402 1005 L 1.0 0.05 W 0.5 0.05 T 0.5 0.05 L1 0.2 + 0.15/-0.1 .040 .002 .020 .002 .020 .002 .020 + .006 - .004 1.6 0.1 0.8 0.1 0.8 0.1 0.3 0.2 .031 .004 .031 .004 .012 .008 .020 + .008 - .012 .020 + .008 - .012 10 0603 1608 .063 .004 21 0805 2012 2.0 0.1 1.25 0.1 .079 .004 .050 .004 31 1206 3216 3.2 0.15 1.6 0.15 1.35 MAX .053 max 1.35 MAX .126 .006 .063 .006 .057 max 0.5+ 0.21-0.3 0.5+ 0.21-0.3 Note: METRIC dimensions throughout this document govern, unless specifically indicated otherwise. HIGH SPEED TYPE CHIP VARISTORS * Typical ESD failure voltage for CMOS and/or Bi Polar is 200V. * 15kV ESD pulse (air discharge) per IEC 1000-4-2.Level 4, generates <2OmJ of energy. * Low capacitance (<200pF) is required for high-speed data transmission. * Low leakage current(lL) is necessary for battery operated equipment. Chip Size 1005 1608 2012 3216 JC Part Number Working Voltage Clamping Voltage Peak Current Transient Energy Capacitance Symbol VWM VC Ipeak Etrans C Units Volts (max) Volts (max) Amp (max.) Joules (max.) Test Condition <50A 8/20 s 8/20 s 10/1000 s pF (typ.) 0.5Vrms @ 1MHz ICVL0518V500 ICVL1018X500 ICVL2118A500 ICVL3118A500 18.0 18.0 18.0 18.0 <50.0 50 50 50 15 20 30 30 0.02 0.05 0.1 0.1 40 75 100 200 TERMINOLOGY * VWM: Maximum steady state DC operating voltage the varistor can maintain and not exceed 50A leakage current. * VB: Voltage across the device measured at 1 mA DC current * VC: Maximum peak voltage across the varistor measured at a specified pulse and waveform * Ipeak: Maximum peak current which may be applied with the specified waveform without device failure * C: Device capacitance measured @0.5Vrms and 1MHz with zero volt bias applied. 15191 Bledsoe St., Sylmar, CA 91342 Tel (818) 364-9800 * Fax (818) 364-6100 Varistors Page 4 of 14 CHIP VARISTOR STANDARD SPECIFICATIONS BY SIZE JC Part Number Working Voltage Varistor Voltage Clamping Voltage Peak Current Transient Energy Capacitance Symbol VWM VS VC Ipeak Etrans C Units Volts (max) Volts Volts (max) Amp (max.) Joules (max.) Test Condition <50A 1 mA DC 8/20 s 8/20 s 10/1000 s ICVN0505X150 ICVN0509X200 ICVN0514X300 ICVN0518X400 ICVN1003A100 ICVN1005A150 ICVN1 009A200 ICVN1014A300 ICVN1018A400 ICVN1026A580 ICVN1030A650 ICVN2103A100 ICVN2105A150 ICVN2109A200 ICVN2112A250 ICVN2114A300 ICVN2118A400 ICVN2126A580 ICVN2130A650 ICVN3103A100 ICVN3105A150 ICVN3114A300 ICVN3118A400 ICVN3126D580 ICVN31300650 ICVN3148D101 5.6 9.0 14.0 18.0 3.3 5.6 9.0 14.0 18.0 26.0 30.0 3.3 5.6 9 12 14 18 26 30 3.3 5.6 14 18 26 30 48 7.6 -9.3 11.0-14.0 16.5-20.3 22.9-28.0 4.1 -6.0 7.6 - 9.3 11.0-15.0 16.5-20.3 22.9-28.0 31.0-38.0 37.0-46.0 4.1 -6.0 7.6-9.3 11.0-14.0 14.0-18.3 16.5-20.3 22.9-28.0 31.0-38.0 37.0-46.0 4.1-6.0 7.6 -9.3 16.5-20.3 22.9-28.0 30.5-37.3 37.0-45.0 56.0-68.0 15.5 20.0 30.0 40.0 10 15.5 20 30 40 58 65 10 15.5 20 25 30 40 58 65 10 15.5 30 40 58 65 100 20 20 20 20 30 30 30 30 30 30 30 40 40 40 40 40 30 30 30 40 40 40 30 120 120 100 0.05 0.05 0.05 0.05 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.4 0.4 0.4 pF (typ) 0.5Vrms @ 1MHz 360 230 120 90 1230 825 550 424 225 160 150 930 860 585 400 280 275 110 80 1500 870 500 270 450 400 185 Chip Size 1005 1608 2012 3216 CHIP VARISTOR PACKAGING SPECIFICATION * All SMD type chip varistors are Tape and Reel packaged in according with the latest revision of EIA 481B Packaging Tape 0402 Chip Size 0603 Chip Size Paper 10,000 pcs/reel Embossed Plastic N/A Material 0805 and 1206 Chip Sizes Thickness 0.85mm Thickness 1.0mm 4,000 pcs/reel 4,000 pcs/reel N/A N/A Optional on request 2,000 pcs/reel All Tape and Reeled product is supplied on 178 2 mm diameter reels with 13 0.5 mm arbor holes. * Packaging in Bulk Case is optional as follows: Size 0402 Chip Size 0603 Chip Size Quantity/case 80,000 pcs 15,000 pcs 0805 and 1206 Chip Sizes Thickness 0.85mm Thickness 1.0mm 10,000 pcs 5,000 pcs Bulk case material is ABS plastic 15191 Bledsoe St., Sylmar, CA 91342 Tel (818) 364-9800 * Fax (818) 364-6100 Varistors Page 5 of 14 CHIP VARISTOR PERFORMANCE ITEM 1005 Operating Temperature Range Storage Temperature & humidity range REQUIREMENTS 1608 2012 3216 -55 C to + 125 C -- 40 C max, 70% RH max. At packing Resistance to solder heat 1. No damage such as cracks in the chip element. 2. Greater than 75% of the terminal shall be covered with fresh solder Solderability More than 90% of the terminal shall be covered with fresh solder Reflow soldering 1. More than 50% of the terminal shall be covered with fresh solder. 2. Varistor voltage change not to exceed 10%. Tensile Strength (terminal strength) Per JIS-C-6429 Board Flex (Bending Strength) 1. The body shall not be damaged by the forces shown in the table Min Flex by Size - TEST CONDITION 2.0 3.0 Drop 1. No mechanical damage Vibration 1. No mechanical damage Preheat temperature: 100 to 150 C Preheat time: 1 minute Solder temperature: 260 10 C Immersion time: 10 0.5 sec. Preheat temperature: 100 to 150 C Preheat time: 1 minute Solder temperature: 230 10 C Immersion time: 3 1 sec. Preheat temperature: 150 C Preheat time: 1 minute Solder temperature: 230 C Soldering time: 10 sec.max Appendix 1 Note: Force of 1.8kg for 60 seconds. Appendix 2 Note: 2mm (Min.) 4.0 Temperature cycle 1. No mechanical damage 2. Varistor voltage change: within 10% Heat load resistance 1. No mechanical damage 2. Varistor voltage change: within 10% Low temperature resistance 1. No mechanical damage 2. Varistor voltage change: within 10% Humidity resistance 1. No mechanical damage 2. Varistor voltage change: within 10% Drop 10 times on a concrete floor from a height of three ft (91cm) Frequency: 10~55--10Hz Amplitude: 1.52mm Direction and time: X,Y,X directions for 2 hours Step 1. -40 3 C for 30 3min. Step 2. +85 3 C for 30 3min. Number of cycles: 100 Temperature : +85 2 C Applied Voltage: working voltage Duration: 1,000 hours Measured after 24 hours at room ambient temperature Temperature: -40 5 C Duration: 1,000 hours Measured after 24 hours at room ambient temperature Temperature: +40 2 C Humidity: 90--95%RH Duration: 500 hours Measured after 24 hours at room ambient temperature 15191 Bledsoe St., Sylmar, CA 91342 Tel (818) 364-9800 * Fax (818) 364-6100 Varistors Page 6 of 14 CHIP VARISTOR PERFORMANCE (Continued) REQUIREMENTS All Sizes ITEM Humidity load resistance 1. No mechanical damage 2. Varistor voltage change: within 10% 1. Varistor voltage change: within 10% Maximum surge current Maximum surge energy ESD life IECI000-4-5 standard 1.2/50 s - 8/20 s voltage-current combination pulse Varistor voltage change: within 10% IECI000-4-5 standard 10/1000 s current pulse 1. No mechanical damage 2. Varistor voltage change: within 10% ESD gun (IEC1000-4-2 standard) C=l50pF R=330 ESD test 1. No mechanical damage 2. Varistor voltage change: within 10% ESD gun (IEC1000-4-2 standard) C=l50pF R=330 TEST CONDITION Temperature: +40 2 C Humidity: 90--95%RH Applied Voltage: working voltage Duration: 500 hours Measured after 24 hours at room ambient temperature Temperature: +40 2 C Humidity: 90--95%RH Polarity: +, Number of pulses one (1) Surge pulse: 8/20 s Applied current: maximum surge current (Is) Temperature: +40 2 C Humidity: 90--95%RH Polarity: +, Number of pulses one (1) Surge pulse: 10/1000 s Applied current: maximum surge current (Ws) Discharge: contact discharge Voltage: 8,000V(level 4) Polarity: +, Number of discharges: 10,000 times in 10 sec. Discharge: Air discharge Voltage: 25,000V(special level) Polarity: +, Number of discharges: 10 times in 10 sec ZINC OXIDE LEADED VARISTORS * * * * * FEATURES Voltage range from 18V up to 1800V Fast response time Symmetrical V-I (Volt-Amp) characteristics High surge current (2000A/cm2) No follow on current APPLICATIONS General Type: * Semiconductor surge protection (IC, diodes,triacs, thyristors) * Military and Industrial telecom * Powerline noise suppression * Measurement and control instrumentation Lightning Arrester Type: * Semiconductor protection (IC, diodes,triacs, thyristors) * Telecom base station and distribution boards * Measurement and control instrumentation 15191 Bledsoe St., Sylmar, CA 91342 Tel (818) 364-9800 * Fax (818) 364-6100 Varistors Page 7 of 14