The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. NEW Interface RF Connector with Switch MS-151NB Series Overview Designed for end user applications requiring redirection of transmission from internal built-in antenna to the external antenna. Small size, lightweight and high reliability makes it ideal for use in 2.4 GHz band wireless LAN applications. Plug can be rotated after full insertion. Features 1. Confirmation of complete connection Built-in interlock feature confirms fully mated condition with a "click" sensation. 2. Non-directional connection The connector can be mated in any position on a 360 axis and can rotate within the same when in use, allowing routing of the connected cable in any direction. 3. High durability Receptacle Guaranteed 5000 insertion/removal cycles. 4. Space-saving The external dimensions of the board-mounted receptacle (5.0 mm high, 6.5 mm wide, 7.0 mm deep) makes it ideal for use in small devices. 5. Ease of connection and handling Over-molded plug, with convenient grip and built-in cable strain relief assures reliable mating/un-mating by end user. MS-151NB 6. Designed for board placement with automatic equipment Top surface of receptacle assembly is flat, allowing reliable hold for vacuum nozzles of automatic placement equipment. Plug 7. Critical area protection MS-151NB (Receptacle) contact has nickel plating areas to prevent solder wicking into critical areas. 8. RoHS compliant All components and materials comply with EU Directive 2002/95/EC, with respect to all applicable substances. MS-151-C(LP) Applications GPS terminals, wireless LAN modules, notebook computers, PDA, and other high frequency equipment. SMA Conversion Adapter For Receptacle: MS-151NB SMA Conversion Adapter For Plug: MS-151-C(LP) MS151P-HRMJ MS151J-HRMJ 2005.12 1 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. Product Specifications Frequency range DC to 3GHz Operating temperature range -40c to +85c Power rating 4W Not mated with the plug to 1 GHz 1.2dBmax. 1 GHz to 2 GHz 1.4dBmax. 2 GHz to 3 GHz 1.7dBmax. 1 DC V.S.W.R. to 1 GHz 0.2dB max. 0.3dB max. 1 GHz to 2 GHz 0.4dB max. 0.5dB max. 2 GHz to 3 GHz 0.6dB max. 1 DC Insertion loss 1.0dB max. to 1 GHz -------------- 20dB min. 1 GHz to 2 GHz --------------- 18dB min. 2 GHz to 3 GHz --------------- 12dB min. 1 DC Isolation loss Item Open(MS-151-C-(LP)) Specification Conditions 1. Contact resistance 50 m ohms max. 2. Insulation resistance 1000 M ohms min. 3. Withstanding voltage No flashover or insulation breakdown 4. Vibration No electrical discontinuity of 10 s or more 5. Shock No electrical discontinuity of 10 s or more 6. Temperature cycle Contact resistance: 100 m ohms max. Insulation resistance: 10 M ohms min. Contact resistance: 100 m ohms max. Insulation resistance: 10 M ohms min. Contact resistance: 100 m ohms max. 8. Salt spray No corrosions Mating: 10N max. 9. Mating/un-mating forces Un-mating: 3 min. 10. Durability Contact resistance: 100 m ohms max. 10. (insertion/ withdrawal) 7. Humidity 7. (Steady state) 100 mA 100 V DC 100 V AC / 1 minute Frequency: 10 to 500 Hz, single amplitude of 0.75 mm, acceleration of 98 m/s2 for 2 hours in each of the 3 directions Acceleration of 490 m/s 2 , 11 ms duration, sine half-wave waveform, 3 cycles in each of the 3 axis Temperature: -55c / +5c to +35c / +85c / +5c to +35c Time: 30 / 2 to 3 / 30 / 2 to 3(Minutes) 100 cycles 96 hours at temperature of 40c and humidity of 90% 5% salt water solution, 48 hours With corresponding connector 5000 cycles Materials Receptacle MS-151NB Part Material Finish Insulator Lock mating section Outer conductor shell Contact A Contact C Polyamide (UL 94V-0) Stainless steel Phosphor bronze Phosphor bronze Beryllium copper --------------Nickel plating (Termination area: gold plated) Nickel plating (Termination area: gold plated) Gold plating Gold plating Plug MS-151-C(LP) Part Cover A Cover B Ring Outer conductor shell Inner contact Insulator Ferrule Crimp metal fitting Bushing 2 Material PC PC Stainless steel Phosphor bronze Phosphor bronze Polyamide (UL 94-HB) Stainless steel Brass Polyester Finish ----------------------------- Nickel plating Nickel plating Gold plating ----------------------------- Nickel plating --------------- The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. BHigh Frequency Characteristics (Typical) NORMALLY CLOSED(N.C) ~ (Not mated with the plug) 0 INSERTION LOSS 0.2 0.4 1.7 0.6 1.6 0.8 1.5 1.0 1.4 0 V.S.W.R. INSERTION LOSS [dB] : V.S.W.R. SPEC : INSERTION LOSS SPEC : ISOLATION SPEC 1.3 V.S.W.R. 10 1.2 20 1.1 ISOLATION 30 1.0 40 DC 1.0 2.0 3.0 [GHz] 0 INSERTION LOSS 0.2 0.4 1.7 0.6 1.6 0.8 1.5 1.0 1.4 ISOLATION [dB] 0 V.S.W.R. INSERTION LOSS [dB] OPEN(N.O) ~ (Mated with the plug) 1.3 V.S.W.R. 10 1.2 20 1.1 ISOLATION 30 1.0 40 DC 1.0 2.0 3.0 [GHz] 3 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. Receptacle G 2 max. A 1.8 3.6 2-0.25 2-0.3 B G 2 7 6.5 1.2 2max. 2 2 C MS-151 2 + 2-0.3 1 0:(connector positioning) 2-0.65 2-1 (2.5) 5 2 2-O0.9 2 2-0.8 - 5.2 1 2 stand for connector position. The coplanarity of terminal lead is -0.05 +0.05 - 0.07 for connector positioning. Set body of application within 2mm from connector front edge. 0.5 0.5 3 3- Note) 1 2.5 Part Number CL No. Packaging MS-151NB(01) 358-0215-9-01 1,000 pieces per reel MS-151NB(01) 358-0215-9-01 100 pieces BCircuit diagram Not mated with the plug(N.C) G Mated with the plug(N.O) G A G C G G B G A B G Plug C G MS-156NB(Receptacle) BPCB mounting pattern 2-O Recommended metal mask thickness : 0.15mm 2.5 1.2 (Th rou 3 gh 2 ole 1.65 2.3 0.6 ) 1.35 nd) 0.2 1.3 3.2 4.3 2-0.6 2-0.55 2-O1 4 3.6 5.2 (La 1.8 2 2-O 1.1 7.1 4.9 Connector front edge No resist RoHS YES The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. BPackaging Specifications Embossed tape reel packaging (1,000 pieces/reel) 12 O1 .5 1.75 4 2 O1 16 16.4 1 O380 O80 MS-151 MS-151 7.5 3 Unreeling direction O2 Unreeling direction 7 22.4 max. BRecommended Temperature Profile Using Typical Solder Paste 240c max. (c) 10 sec. max. 240 Maximum temperature : 240c Peak temperature duration : 10 sec. Max. Peak temperature : 220c to 235c 200c min. : 50 sec. Max. 150c to 160c : 40 sec. Min. Maximum temperature : 260c Peak temperature duration : 5 sec. Max. Peak temperature : 240c to 255c 220c min. : 50 sec. to 80 sec. 180c to 200c : 120 sec. Min. 200 160 150 100 0 40 sec. min. 50 sec. max. Using Lead-free Solder Paste 260c max. (c) 5 sec. max. 260 220 200 180 100 0 120 sec. max. 50 sec. to 80 sec. 5 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. Plug (24.1) (5.5) (12.5) (8) * Dedicated termination tools required. * Can be supplied terminated with cable. (O4.15) Part Number CL No. Packaging MS-151-C(LP) 358-0160-9 1 Applicable cable 1.5DS-QEHV(TA) or UL1.5DL1.5DS-QEHV(TA) RoHS YES Termination fixture: MS-151/CF-MD, MS-151/SO-MD, MS-151/BE-MP and MS-151/CK-MP Please contact your Hirose Electric representative for information. SMA Conversion adaptors For Receptacle: MS-151 O7.3 O4.15 1/4-36UNS-2A 6 6.3 (6.29) 5.5 17.79 Part Number CL No. Packaging RoHS MS151P-HRMJ 355-0089-7 1 YES For Plug: MS-151-C(LP) O7.3 O2.9 1/4-36UNS-2A 6.3 6 (6.29) 3.5 15.79 6 Part Number CL No. Packaging RoHS MS151J-HRMJ 355-0088-4 1 YES