MS-151-C(LP) - HIROSE Electric U.S.A., Inc.

1

Interface RF Connector with Switch

MS-151NB Series

NEW

2005.12

■Features

1. Confirmation of complete connection

Built-in interlock feature confirms fully mated condition

with a "click" sensation.

2. Non-directional connection

The connector can be mated in any position on a 360°

axis and can rotate within the same when in use,

allowing routing of the connected cable in any direction.

3. High durability

Guaranteed 5000 insertion/removal cycles.

4. Space-saving

The external dimensions of the board-mounted

receptacle (5.0 mm high, 6.5 mm wide, 7.0 mm deep)

makes it ideal for use in small devices.

5. Ease of connection and handling

Over-molded plug, with convenient grip and built-in cable

strain relief assures reliable mating/un-mating by end user.

6.

Designed for board placement with automatic

equipment

Top surface of receptacle assembly is flat, allowing

reliable hold for vacuum nozzles of automatic placement

equipment.

7.

Critical area protection

MS-151NB (Receptacle) contact has nickel plating areas

to prevent solder wicking into critical areas.

8. RoHS compliant

All components and materials comply with EU Directive

2002/95/EC, with respect to all applicable substances.

■Applications

GPS terminals, wireless LAN modules, notebook computers,

PDA, and other high frequency equipment.

■Overview

Designed for end user applications requiring re-

direction of transmission from internal built-in

antenna to the external antenna. Small size,

lightweight and high reliability makes it ideal for

use in 2.4 GHz band wireless LAN applications.

MS151P-HRMJ

●

SMA Conversion Adapter

For Receptacle: MS-151NB

MS151J-HRMJ

●

SMA Conversion Adapter

For Plug: MS-151-C(LP)

MS-151NB

MS-151-C(LP)

Plug can be rotated after full insertion.

●Receptacle

●Plug

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.

2

■Product Specifications

100 mA

100 V DC

100 V AC / 1 minute

Frequency:

10 to 500 Hz, single amplitude of 0.75 mm, acceleration

of 98 m/s2 for 2 hours in each of the 3 directions

Acceleration of 490 m/s2, 11 ms duration, sine half-wave

waveform, 3 cycles in each of the 3 axis

Temperature: -55ç

/

+5çto +35ç

/

+85ç

/

+5çto +35ç

Time: 30

/

2 to 3

/

30

/

2 to 3(Minutes)

100 cycles

96 hours at temperature of 40çand humidity of 90%

5% salt water solution, 48 hours

With corresponding connector

5000 cycles

50 m ohms max.

1000 M ohms min.

No flashover or insulation breakdown

No electrical discontinuity of 10 µs or more

Contact resistance: 100 m ohms max.

Insulation resistance: 10 M ohms min.

Contact resistance: 100 m ohms max.

Insulation resistance: 10 M ohms min.

Contact resistance: 100 m ohms max.

No corrosions

Mating: 10N max.

Un-mating: 3 min.

Contact resistance: 100 m ohms max.

1. Contact resistance

2.

Insulation resistance

3.

Withstanding voltage

4. Vibration

5. Shock

6. Temperature cycle

7. Humidity

7. (Steady state)

8. Salt spray

9.

Mating/un-mating forces

10. Durability

10.

(insertion/ withdrawal)

Item Specification Conditions

Frequency range

Operating temperature range

Power rating

V.S.W.R.

Insertion loss

Isolation loss

DC to 3GHz

-40çto +85ç

4W

1DC to 1 GHz

1 GHz to 2 GHz

2 GHz to 3 GHz

1DC to 1 GHz

1 GHz to 2 GHz

2 GHz to 3 GHz

1DC to 1 GHz

1 GHz to 2 GHz

2 GHz to 3 GHz

1.2dBmax.

1.4dBmax.

1.7dBmax.

0.2dB max.

0.4dB max.

0.6dB max.

--------------

---------------

0.3dB max.

0.5dB max.

1.0dB max.

20dB min.

18dB min.

12dB min.

Not mated with the plug Open(MS-151-C-(LP))

■Materials

Receptacle MS-151NB

Insulator Polyamide (UL 94V-0) ---------------

Lock mating section Stainless steel Nickel plating (Termination area: gold plated)

Outer conductor shell Phosphor bronze Nickel plating (Termination area: gold plated)

Contact A Phosphor bronze Gold plating

Contact C Beryllium copper Gold plating

Part Material Finish

Plug MS-151-C(LP)

Cover A PC ---------------

Cover B PC ---------------

Ring Stainless steel Nickel plating

Outer conductor shell Phosphor bronze Nickel plating

Inner contact Phosphor bronze Gold plating

Insulator Polyamide (UL 94-HB) ---------------

Ferrule Stainless steel ---------------

Crimp metal fitting Brass Nickel plating

Bushing Polyester ---------------

Part Material Finish

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.

3

BHigh Frequency Characteristics (Typical)

1.0

1.1

1.2

1.3

1.4

1.5

1.6

1.7

DC 3.0 [GHz]

0

0.2

0.4

0.6

0.8

1.0

0

10

20

30

40

2.01.0

INSERTION LOSS

ISOLATION

V.S.W.R.

: V.S.W.R. SPEC

: INSERTION LOSS SPEC

: ISOLATION SPEC

INSERTION LOSS [dB]

V.S.W.R.

●NORMALLY CLOSED(N.C) ~ (Not mated with the plug)

1.0

1.1

1.2

1.3

1.4

1.5

1.6

1.7

DC 3.0 [GHz]

0

0.2

0.4

0.6

0.8

1.0

0

10

20

30

40

2.01.0

INSERTION LOSS

ISOLATION

V.S.W.R.

INSERTION LOSS [dB]

ISOLATION [dB]

V.S.W.R.

●OPEN(N.O) ~ (Mated with the plug)

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.

4

■Receptacle

BPCB mounting pattern

BCircuit diagram

0.5

3- 0.5

+

–

0:(connector

positioning)

( 2.5 )

2max.

5

2-0.65

2-Ø0.9

3 2.5

2-0.8

6.5

2-0.3

3.6

2-0.3

B

GA C

G

2

5.2

2-1

MS-151

1.8

2-0.25

7 1.2

1

2

22

Note) stand for connector position.

The coplanarity of terminal lead is -0.05 for

connector positioning.

Set body of application within 2mm from

connector front edge.

+0.05

–

0.07

1

2

G

B

Mated with the plug(N.O)Not mated with the plug(N.C)

Plug MS-156NB(Receptacle)

G

A

C

G

B

G

A

C

G

No resist

4.9

3.2

3

1.8

2

3.6

5.2

4.3

Connector front edge

7.1

2-0.55

2-0.6

1.1

0.2

1.3

2-Ø1

2-Ø2(Land)

2-Ø1.2(Throug hole)

0.6

2.3

1.65

1.35

2.5

Part Number

MS-151NB(01)

CL No.

358-0215-9-01

Packaging RoHS

1,000 pieces per reel

100 pieces YES

Recommended metal mask thickness : 0.15mm

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.

5

BPackaging Specifications

BRecommended Temperature Profile

MS-151

Unreeling direction

12

7.5

Ø80

1.75

16

7

Ø380

4

2

22.4 max.

16.4

Ø1.5

Ø21

Ø13

0

100

160

200

240

10 sec. max.

40 sec. min. 50 sec. max.

150

(ç)

Using Typical Solder Paste

Using Lead-free Solder Paste

240ç max.

260ç max.

0

100

180

200

120 sec. max. 50 sec. to 80 sec.

260

220

5 sec. max.

Embossed tape reel packaging (1,000 pieces/reel)

Maximum temperature

Peak temperature duration

Peak temperature

200ç min.

150ç to 160ç

: 240ç

: 10 sec. Max.

: 220ç to 235ç

: 50 sec. Max.

: 40 sec. Min.

Maximum temperature

Peak temperature duration

Peak temperature

220ç min.

180ç to 200ç

: 260ç

: 5 sec. Max.

: 240ç to 255ç

: 50 sec. to 80 sec.

: 120 sec. Min.

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.

6

■Plug

●For Receptacle: MS-151

(24.1)

* Dedicated termination tools required.

* Can be supplied terminated with cable.

(8)

(12.5)

(5.5)

(Ø4.15)

Part Number

MS-151-C(LP)

Termination fixture: MS-151/CF-MD, MS-151/SO-MD, MS-151/BE-MP and MS-151/CK-MP

Please contact your Hirose Electric representative for information.

CL No.

358-0160-9

Packaging RoHSApplicable cable

1 YES

1.5DS-QEHV(TA) or

UL1.5DL1.5DS-QEHV(TA)

■SMA Conversion adaptors

Ø7.3

6.3

Ø4.15

(6.29)6 5.5

17.79

1/4-36UNS-2A

Part Number

MS151P-HRMJ

CL No.

355-0089-7

Packaging

1

●For Plug: MS-151-C(LP)

Ø7.3

Ø2.9

(6.29)6 3.5

15.79

6.3

1/4-36UNS-2A

Part Number

MS151J-HRMJ

CL No.

355-0088-4

Packaging

1

RoHS

YES

RoHS

YES

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.