HITANO ENTERPRISE CORP. BY296-BY299 TECHNICAL SPECIFICATIONS OF FAST RECTIFIER VOLTAGE RANGE - 100 to 800 Volts CURRENT - 2.0 Amperes FEATURES *Fast switching *Low leakage *Low forward voltage drop *High current capability *High current surge *High reliability MECHANICAL DATA *Case : Molded plastic *Epoxy : UL 94V-0 rate flame retardant *Lead : MIL-STD-202E , Method 208 guaranteed *Mounting position : Any *Weight : 0.38 gram MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz , resistive or inductive load. Dimensions in inches and (millimeters) For capacitive load , derate current by 20%. Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current At TA =75 Peak Forward Surge Current 8.3 ms single half sine-wave superimposed on rated load (JEDEC Method) Maximum instantaneous Forward Voltage at 2.0A DC Maximum DC Reverse Current at Rated DC Blocking Voltage TA =25 Maximum Full Load Reverse Current Full Cycle Average, .375*(9.5mm) lead length at TL=55 Maximum Reverse Recovery Time (Note 1) Typical Junction Capacitance (Note 2) Operating and Storage Temperature Range SYMBOL VRRM VRMS VDC BY296 100 70 100 BY297 200 140 200 BY298 400 280 400 BY299 800 560 800 UNITS Valts Valts Valts lO 2.0 Amps IFSM 70 Amps VF 1.3 Valts 5.0 uAmp s 100 uAmp s IR trr CJ TJ, TSTG NOTES: 1. Test Conditions : IF = 0.5A ,I R = 1.0A ,IRR = 0.25A 2. Measured at 1MHz and applied reverse voltage of 4.0 volts. 150 500 40 -60 to +150 nSec pF RATING AND CHARACTERISTIC CURVES (BY296 THRU BY299)