VS2 Series Opposed-Mode Sensors Miniature self-contained sensors VS2 Series Features * Totally self-contained miniature sensors * 10 to 30V dc operation * Visible red or infrared sensing beam, depending on model * Up to 3 m (118") sensing range (see Range specifications below) * Choose dark or light operate models * Choose models with NPN (sinking) or PNP (sourcing) output * 2-wire and 3-wire hookup; output load capacity to 50 mA * Choice of integral cable or quick-disconnect pigtail * Sensors may be purchased in pairs, or individually E NN BA 2 VS R VS 2A N5 R VS2 Series miniature self-contained sensors are designed for precision sensing in small areas previously accessible only to remote or fiber optic models. Typical applications include mounting inside vibrating feeders and electronic component handling equipment. Infrared, 940 nm Visible red, 660 nm VS2 Series Opposed-Mode Sensors Sensing Supply Output QD Beam/ Models** Range Voltage Type Component Cabled Models* Emitter Receiver Sensor Pair VS25EV VS2AN5R VS2KAN5V VS25EVQ VS2AN5RQ VS2KAN5VQ NPN/ Light Operate Emitter Receiver Sensor Pair VS25EV VS2AP5R VS2KAP5V VS25EVQ VS2AP5RQ VS2KAP5VQ Visible Red, 660 nm PNP/ Light Operate Emitter Receiver Sensor Pair VS25EV VS2RN5R VS2KRN5V VS25EVQ VS2RN5RQ VS2KRN5VQ 1.2 m (47") NPN/ Dark Operate Emitter Receiver Sensor Pair VS25EV VS2RP5R VS2KRP5V VS25EVQ VS2RP5RQ VS2KRP5VQ Emitter Receiver Sensor Pair VS25E VS2AN5R VS2KAN5 VS25EQ VS2AN5RQ VS2KAN5Q 10 to 30V dc Emitter Receiver Sensor Pair VS25E VS2AP5R VS2KAP5 VS25EQ VS2AP5RQ VS2KAP5Q Infrared, 940 nm Emitter Receiver Sensor Pair VS25E VS2RN5R VS2KRN5 VS25EQ VS2RN5RQ VS2KRN5Q 3.0 m (118") Emitter Receiver Sensor Pair VS25E VS2RP5R VS2KRP5 VS25EQ VS2RP5RQ VS2KRP5Q Excess Gain 1000 E X C E S S Effective Beam: 3 mm VS2 Series Opposed Mode Visible Red 100 VS2 Series 300 mm 12 in Opposed Mode Visible Red 200 mm 8 in 100 mm 4 in 0 G A I N 10 0 100 mm 4 in 200 mm 8 in 300 mm 1 0.01 m 0.4 in PNP/ Dark Operate 0.10 m 4 in 1.0 m 40 in 10.0 m 400 in 12 in 0 0.3 m 12 in 0.6 m 24 in DISTANCE NPN/ Light Operate PNP/ Light Operate NPN/ Dark Operate G A I N 0.9 m 36 in 1.2 m 48 in Effective Beam: 3 mm VS2 Series VS2 Series 600 mm Opposed Mode Infrared 100 24 in Opposed Mode Infrared 400 mm 16 in 200 mm 8 in 0 10 0 -200 mm -8 in -400 mm -16 in -600 mm 1 0.01 m 0.4 in 1.5 m 60 in DISTANCE 1000 E X C E S S PNP/ Dark Operate Beam Pattern 0.10 m 4 in 1.0 m 40 in 10.0 m 400 in -24 in 0 0.75 m 2.5 ft DISTANCE 1.5 m 5 ft 2.25 m 7.4 ft 3.0 m 10 ft 3.75 m 13.1 ft DISTANCE * Cabled models have 2 m (6.5') integral cable; 2-wire for emitters, 3-wire for receivers. ** QD models have 3-pin 150 mm (6.5") Pico-style QD pigtail. QD models require mating cable; see page 4. Printed in USA 02/02 P/N 57248 rev. D VS2 Series - Opposed Mode VS2 Series Opposed-Mode Sensor Specifications Supply Voltage and Current 10 to 30V dc (10% maximum ripple) Emitter: 25 mA (visible beam); 30 mA (infrared beam) Receiver: 25 mA (exclusive of load) Supply Protection Circuitry Protected against reverse polarity and transient voltages Output Configuration SPST solid-state switch Choose NPN (current sinking) or PNP (current sourcing) models Choose light operate (N.O.) or dark operate (N.C.) models Output Rating 50 mA maximum Off-state leakage current: < 1 microamp at 24V dc On-state saturation voltage: < 0.25V at 10 mA dc; < 0.5V at 50 mA dc Output Protection Circuitry Protected against false pulse on power-up and continuous overload or short circuit of outputs Overload trip point 100 mA Output Response Time 1 millisecond ON and 0.5 milliseconds OFF (NOTE: 100 millisecond delay on power-up: output is non-conducting during this time) Repeatability 100 microseconds Indicators Two LEDs: Green and Yellow Green ON steady Green flashing Yellow ON steady Yellow flashing = = = = power to sensor is ON output overload light is sensed marginal excess gain (1-1.5x) in light condition Construction Black ABS housing with clear MABS lens Environmental Rating IP67; NEMA 6 Connections 2 m (6.5') attached cable: three #28 ga stranded conductors with PE insulation; PVC outer cable jacket; or 3-pin Pico-style pigtail quick-disconnect fitting. QD cables are ordered separately. Operating Conditions Temperature: -20 to +55C (-4 to +131F) Maximum Relative Humidity: 80% at 50C (non-condensing) Vibration and Mechanical Shock Vibration: All models meet IEC 60068-2-6, IEC 60947-5-2, UL491 Section 40, MIL-STD-202F Method 201A; 10 to 60 Hz, 0.5 mm peak to peak Shock: All models meet IEC 60068-2-27, IEC 60947-5-2; 30g peak acceleration, 11 millisecond pulse duration, half-sine wave pulse shape Application Notes M2 stainless steel mounting hardware included. Optional mounting brackets are available (page 4). Certifications VS2 Series Sensor Hookups Sensors with NPN Outputs Cabled hookup bu - 10-30V dc + bn bk Quick-Disconnect hookup - 10-30V dc + bn bk Load bn + 10-30V dc - bu bk Load bu Sensors with PNP Outputs Cabled hookup Emitters Cabled hookup bu - 10-30V dc + bn Load Quick-Disconnect hookup + 10-30V dc - bu bk Quick-Disconnect hookup bu bn bn - 10-30V dc + bk Load Banner Engineering Corp. * Minneapolis, MN U.S.A. page 2 www.bannerengineering.com * Tel: 763.544.3164 VS2 Series - Opposed Mode VS2 Series Opposed-Mode Sensor Dimensions 12.0 mm (0.47") Green Power Indicator CL 8.0 mm (0.31") 2.0 mm (0.08") 4.3 mm (0.17") 3.6 mm (0.14") 150 mm (6") Pigtail 16.7 mm 25.1 mm (0.66") (0.99") VS2 Yellow Signal Indicator (Receiver only) 2x o2.2 mm (0.09") 4.8 mm (0.19") Accessories Quick-Disconnect (QD) Cables Style 3-pin Pico Style Straight ! Models Length PKG3M-2 2 m (6.5') PKG3M-9 9 m (30') WARNING . . . For Use With All VS2 Series sensors with model suffix "Q". Dimensions 34.7 mm (1.37") Pinout M8 x 1 Black Wire 9.6 mm (0.38") Blue Wire Brown Wire Not To Be Used for Personnel Protection Never use this product as a sensing device for personnel protection. Doing so could lead to serious injury or death. This product does NOT include the self-checking redundant circuitry necessary to allow its use in personnel safety applications. A sensor failure or malfunction can cause either an energized or de-energized sensor output condition. Consult your current Banner Safety Products catalog for safety products which meet OSHA, ANSI and IEC standards for personnel protection. Banner Engineering Corp. * Minneapolis, MN U.S.A. www.bannerengineering.com * Tel: 763.544.3164 page 3 VS2 Series - Opposed Mode Accessories VS2 Apertures * 0.5 mm and 1.0 mm apertures * 0.1 mm 300 series stainless steel APVS2-0204 APVS2-0608 22.8 mm (0.90") 22.8 mm (0.90") 16.7 mm (0.66") o0.5 mm (0.02") 16.7 mm (0.66") 4x o2.1 mm (0.8") 4.6 mm (0.18") 4x o2.1 mm (0.8") 4.6 mm (0.18") o1.5 mm (0.06") 8.0 mm (0.31") 12.4 mm (0.49") 12.4 mm (0.49") CL o2.0 (0.08") o1.0 mm (0.04") 2.5 mm (0.10") 16.7 mm (0.66") 2.5 mm (0.10") * 0.5 mm wide aperture * 0.1 mm 300 series stainless steel APVS2-02R APVS2-04R 8.0 mm (0.31") 2.5 mm (0.10") 16.7 mm (0.66") 22.8 mm (0.90") 2x 3.3 mm (0.13") * 1.5 mm and 2.0 mm apertures * 0.1 mm 300 series stainless steel CL 2.5 mm (0.10") * 1 mm wide aperture * 0.1 mm 300 series stainless steel 22.8 mm (0.90") 4x o2.1 mm (0.8") 16.7 mm (0.66") 4.6 mm (0.18") 2x 0.5 mm (0.02") 12.4 mm (0.49") 2x 3.3 mm (0.13") 8.0 mm (0.31") 2x 1 mm (0.04") 4.6 mm (0.18") 12.4 mm (0.49") CL 2.5 mm (0.10") 16.7 mm (0.66") 4x o2.1 mm (0.8") 16.7 mm (0.66") 2.5 mm (0.10") 16.7 mm (0.66") 8.0 mm (0.31") 2.5 mm (0.10") CL 2.5 mm (0.10") VS2 Series Mounting Brackets SMBVS2RA * Right-angle bracket * 300 series stainless steel 8.0 mm (0.32") 2x 3.2 mm (0.13") 3.0 mm (0.12") 7.0 mm (0.28") 5.5 mm (0.22") 8.0 mm (0.32") 3.0 mm (0.12") 8.0 mm (0.32") 0.9 mm (0.04") 20.0 mm (0.79") 9.0 mm (0.35") 20.0 mm (0.79") 14.0 mm (0.55") 4 x o2.3 mm (0.09") WARRANTY: Banner Engineering Corp. warrants its products to be free from defects for one year. Banner Engineering Corp. will repair or replace, free of charge, any product of its manufacture found to be defective at the time it is returned to the factory during the warranty period. This warranty does not cover damage or liability for the improper application of Banner products. This warranty is in lieu of any other warranty either expressed or implied. Banner Engineering Corp., 9714 Tenth Ave. No., Minneapolis, MN 55441 * Phone: 763.544.3164 * www.bannerengineering.com * sensors@bannerengineering.com