WCC 5 Standard overlay icons especially designed for the CTH and CSM series. Optically clear adhesive for easy installation, high cohesive, and long term durability Application * Mobile communication devices * Touch screen monitors * Electronic devices * Media players * Point of sale terminals * Food service appliances * Industrial control displays * Appliances and consumer equipments Key features * Standard Icons: Arrow, On/OFF, Alarm * lcons combines interactive control with color identification to ease and accelerate user interactions for any device * Reverse printed translucent clear icons for capacitive touch sensor LED backlighting * Overlay lamination with optically clear adhesive * Optically clear adhesive for easy installation, high cohesive, and long term durability * When the CTH or CSM are turned off you can still see the standard icon overlay * Offers high-temperature capability, high hardness, use resistance, and chemical inertness * Custom icons are also available upon request [contact a VCC representative] * Suggested overlay size: 0.590 x 0.590 * Icon protected by transparent removable film Ve Cc" Your first call for illuminated components 1/18 Revi veclite.com 1.800.522.5546 CTH&CSMOVERLAY | Page 1 of 6Ordering Data The Overlay is available in 3 different standard icons simply choose one option from each column: Series Type Icon CTH OVERLAY Y ALARM ONOFF ARROW SKU: CTHOVERLAYALARM SKU: CTHOVERLAYALARM SKU: CTHOVERLAYALARM Product Specifications Substrate material: Lexan 8010 Adhesive material: Optically clear adhesive Ve Cc" Your first call for illuminated components 1/18 Revi veclite.com 1.800.522.5546 CTH&CSMOVERLAY | Page 2 of 6CTHOVERLAYONOFF .007 + .590 .590 1 TRANSPARENT/CLEAR WINDOW - 100% OPAQUE/LIGHT-BLOCKING Dimensions are in inches Your first call for illuminated components veclite.com 1.800.522.5546 O/O/O/O/O/O/O/O/ 0/0 O/O/O/O/O/O/O/O/ 0/0 O/O/O/O/O/O/O/O/ 0/0 O/O/O/O/O/O/O/O/ 0/0 O/O/O/O/O/O/O/O/ 0/0 O/O/O/O/O/O/O/O/ 0/0 O/O/O/O/O/O/O/O/ 0/0 O/O/O/O/O/O/O/O/ 0/0 O/O/O/O/O/O/O/O/ 0/0 O/O/O/O/O/O/O/O/ 0/0 10 X 10 Kiss Cut Sheet 1/18 Rev1 CTH&CSMOVERLAY | Page 3 of 6CTHOVERLAYARROW .007 7 TRANSPARENT/ + .590" > CLEAR WINDOW \ oh -100% OPAQUE/ CTHOVERLAYARROW LIGHT-BLOCKING (5903 Dimensions are in inches Vo Cc" Your first call for illuminated components 1/18 Revi veclite.com 1.800.522.5546 CTH&CSMOVERLAY | Page 4 of 6CTHOVERLAYALARM .007 + .590 .590 "pt TRANSPARENT/CLEAR WINDOW Oo +_ 100% OPAQUE/LIGHT-BLOCKING Dimensions are in inches TE) St] Tt) LE] Ht] TE) Lt] ot) ot) at TE) St] Tt) LE] Ht] TE) Lt] ot) oe) et TE) St] Tt) LE] Ht] TE) Lt] ot) ot) at TE) St] Tt) LE] Ht] TE) Lt] ot) oe) et TE) St] Tt) LE] Ht] TE) Lt] ot) oe) et TE) St] Tt) LE] Ht] TE) Lt] ot) ot) at TE) St] Tt) LE] Ht] TE) Lt] ot) oe) et TE) St] Tt) LE) Ht] TE) Lt] ot) ot) et TE) St] Tt) LE] Ht] TE) Lt] ot) oe) et TE) St] Tt) LE] Ht] TE) Lt] ot) oe) et 10 X 10 Kiss Cut Sheet Vo Your first call for illuminated components 1/18 Rev1 veclite.com 1.800.522.5546 CTH&CSMOVERLAY | Page 5 of 6Overlay Installation Instructions Professional service technicians use grounding straps to minimize the chances of electrostatic discharge (ESD) during normal maintenance involving electronic devices. These antistatic devices may be placed around the wrists or ankles to ground the technician to the system being worked on. These straps release any static present on the technician's body and pass it harmlessly to ground potential. Use the appropriate equipment. An antistatic bag is a bag used to store electronic components, which are prone to damage caused electrostatic discharge (ESD). Steps: Note: if using reflow soldering the overlay must be installed afterwards as a second operation 1) Peel the overlay (adhesive) off its white sheet without removing the transparent film (Figure 1) 2) Apply the overlay over the capacitive touch sensor component (Figure 2) without removing the protective face line. Be sure to align or orientate the overlay properly. 3) Be sure check for no contamination in the ignition zone this can be done with electrical test (Figure 4,5,6) 4) The protective film can either be removed in the assembly line or by the end user Figure 1 Figure 2 Figure 3 ade > Y\ oo ye \\) Figure 4 Figure 5 Figure 6 S Contamined Overlay Cerone MBI e chy Compliances and Approvals M Rts & (A) EDMPUANEE Po-Free ESD SAFE Ve Cc" Your first call for illuminated components 1/18 Revi veclite.com 1.800.522.5546 CTH&CSMOVERLAY | Page 6 of 6