P/N: C-1xx-155-TDFB(3)-SSC6x(-G5) 155 Mbps CWDM Laser Single Mode Transceiv Features z z z z z z z z z z z z z z z Duplex SC Single Mode Transceiver Industry Standard 1x9 Footprint Intermediate reach SONET OC-3 SDH STM-1 Compliant Single +5V/3.3V Power Supply PECL/LVPECL Differential Inputs and Outputs PECL/LVPECL Signal Detection Output Wave Solderable and Aqueous Washable LED Multisourced 1x9 Transceiver Interchangeable Class 1 Laser Int. Safety Standard IEC 825 compliant Uncooled laser diode with MQW structure Complies with Telcordia (Bellcore) GR-468-CORE ATM 155 Mbps links SONET/SDH Equipment Interconnect application CWDM RoHS compliance available Table 1 - Absolute Maximum Rating Parameter Symbol Min. Typical Max. Unit Power Supply Voltage Vcc 0 - 6 V Power Supply Voltage Vcc 0 - 3.6 V Output Current Iout - - 30 mA - - - 260 C Tstg -40 - 85 C Symbol Min. Typical Max. Unit Vcc 4.75 5 5.25 V Power Supply Voltage Vcc 3.1 3.3 3.5 V Operating Temperature (Case) Topr 0 - 70 C DR - 155 - Mbps Soldering Temperature Storage Temperature Notes 1 Note 1: 10 senconds on leads only Table 2 - Recommended Operating Condition Parameter Power Supply Voltage Data Rate Notes 2 Note 2: Please refer to ordering information -1- DS-6118 Rev 0.0 2010-05-10 P/N: C-1xx-155-TDFB(3)-SSC6x(-G5) 155 Mbps CWDM Laser Single Mode Transceiv Table 3 - Transmitter Specifications (Optical) Parameter Symbol Min. Typical Max. Unit Optical Transmit Power Po -3 - +2 dBm Output Center Wavelength n-5.5 n n+7.5 nm 3 Side Mode Suppression Ratio Sr 30 35 - dB 4 - - 1 nm 5 ER 8.2 - - dB Output Spectrum Width Extinction Ratio Output Eye Notes Compliant with ITU-T recommendation G.957 Optical Rise/Fall Time tr /tf - - 2 ns Relative Intensity Noise RIN - - -116 dB/Hz TJ - - 1.2 ns Symbol Min. Typical Max. Unit Notes Power Supply Current ICC - - 180 mA 7 Data Input Current-Low IIL -350 - - A Data Input Current-High IIH - - 350 A Differential Input Voltage VIH-VIL 300 - - mV Data Input Voltage-Low VIL-VCC -2.0 - -1.58 V Data Input Voltage-High VIH-VCC -1.1 - -0.74 V Total Jitter 6 Note 3:n=1xx0 nm Note 4: CW, Po=5mW Note 5: -20 dB width Note 6: 10% to 90% Values Table 4 - Transmitter Specifications (Electrical) Parameter 8 Note 17: Maximum current is specified at VCC = Maximum @ maximum temperature Note 18: These inputs are compatible with 10K, 10KH and 100K ECL and PECL inputs -2- DS-6118 Rev 0.0 2010-05-10 P/N: C-1xx-155-TDFB(3)-SSC6x(-G5) 155 Mbps CWDM Laser Single Mode Transceiv Table 5 - Receiver Specifications (Optical) Parameter Symbol Min. Typical Max. Unit Notes - - - -37 dBm 9 Maximum Input Power Pin 0 - - dBm Signal Detect-Asserted Pa - - -37 dBm 10 Signal Detect-Deasserted Pd -47 - - dBm 11 Signal Detect-Hysteresis - 1.0 - 4.0 dB 1100 - 1600 nm Sensitivity Wavelength of Operation 23 Note 9: Measured with 2 -1 PRBS with 72 ones and 72 zeros. Note 10: Measured on transition: low to high. Note 11: Measured on transition: high to low. Table 6 - Receiver Specifications (Electrical) Parameter Symbol Min. Typical Max. Unit Notes ICC - - 100 mA 12 Data Output Voltage-Low VOL-VCC -2 - -1.58 V Data Output Voltage-High VOH-VCC -1.1 - -0.74 V Signal Detect Output Voltage-Low VSDL-VCC -2 - -1.58 V Signal Detect Output Voltage-High VSDH-VCC -1.1 - -0.74 V Power Supply Current 13 Note 12: The current excludes the output load current Note 13: These outputs are compatible with 10K, 10KH and 100KECL and LVPECL outputs. -3- DS-6118 Rev 0.0 2010-05-10 P/N: C-1xx-155-TDFB(3)-SSC6x(-G5) 155 Mbps CWDM Laser Single Mode Transceiv Connection Diagram Table 7 - Pin Definitions Pin Unit Notes 1 RxGND 2 RD+ See recommended circuit schematic 3 RD- See recommended circuit schematic 4 SD Active high on this indicates a received optical section 5 RxVCC DC power for the receiver section 6 TxVCC DC power for the transmitter section 7 TD- See recommended circuit schematic 8 TD+ See recommended circuit schematic 9 TxGND Directly connect this pin to the receiver ground plane Directly connect this pin to the transmitter ground plane -4- DS-6118 Rev 0.0 2010-05-10 P/N: C-1xx-155-TDFB(3)-SSC6x(-G5) 155 Mbps CWDM Laser Single Mode Transceiv Recommended Circuit Schematic C-1xx-155-TDFB(3)-SSC6(D/E) Tx Vcc C5 Rx Vcc 9 8 R1 7 6 5 4 3 2 1 R3 C6 R9 R5 R7 TD + RD + TD - RD - Tx Vcc SD Rx Vcc R2 R10 R4 No internal connection Notes +3.3V: R1=R3=R5=R7=R9=130 R2=R4=R6=R8=R10=82 C1=C2=C3=C5=C6=0.1F C4=10F L1=L2=1H Transceiver Top view Notes +5V: R1=R3=R5=R7=R9=82 R2=R4=R6=R8=R10=130 C1=C2=C3=C5=C6=0.1F C4=10F L1=L2=1H R6 R8 No internal connection L1 Vcc C3 Rx Vcc C1 L2 C4 Tx Vcc C2 The split-loaded terminations for ECL signals need to be located at the input of devices receiving those ECL signals. The power supply filtering is required for good EMI performance. Use short tracks from the inductor L1/L2 to the module Rx Vcc. / Tx Vcc. A GND plane under the module is required for good EMI and sensitivity performance. -5- DS-6118 Rev 0.0 2010-05-10 P/N: C-1xx-155-TDFB(3)-SSC6x(-G5) 155 Mbps CWDM Laser Single Mode Transceiv Package Diagram (10.4 mm SC transceiver assembly) C-1xx-155-TDFB(3)-SSC6 Front View Top View Units: mm Blank: Black case Package Diagram (9.8 mm SC transceiver assembly) C-1xx-155-TDFB(3)-SSC6D(E) Front View Top View Units: mm R ear View Side View D: Black case E: Blue case -6- DS-6118 Rev 0.0 2010-05-10 P/N: C-1xx-155-TDFB(3)-SSC6x(-G5) 155 Mbps CWDM Laser Single Mode Transceiv Order Information Table 8 - Order Information Part No. Part No. Part No. C-127-155-TDFB(3)-SSC6(G5) C-127-155-TDFB(3)-SSC6D(G5) C-127-155-TDFB(3)-SSC6E(G5) C-129-155-TDFB(3)-SSC6(G5) C-129-155-TDFB(3)-SSC6D(G5) C-129-155-TDFB(3)-SSC6E(G5) C-131-155-TDFB(3)-SSC6(G5) C-131-155-TDFB(3)-SSC6D(G5) C-131-155-TDFB(3)-SSC6E(G5) C-133-155-TDFB(3)-SSC6(G5) C-133-155-TDFB(3)-SSC6D(G5) C-133-155-TDFB(3)-SSC6E(G5) C-135-155-TDFB(3)-SSC6(G5) C-135-155-TDFB(3)-SSC6D(G5) C-135-155-TDFB(3)-SSC6E(G5) C-137-155-TDFB(3)-SSC6(G5) C-137-155-TDFB(3)-SSC6D(G5) C-137-155-TDFB(3)-SSC6E(G5) C-139-155-TDFB(3)-SSC6(G5) C-139-155-TDFB(3)-SSC6D(G5) C-139-155-TDFB(3)-SSC6E(G5) C-141-155-TDFB(3)-SSC6(G5) C-141-155-TDFB(3)-SSC6D(G5) C-141-155-TDFB(3)-SSC6E(G5) C-143-155-TDFB(3)-SSC6(G5) C-143-155-TDFB(3)-SSC6D(G5) C-143-155-TDFB(3)-SSC6E(G5) C-145-155-TDFB(3)-SSC6(G5) C-145-155-TDFB(3)-SSC6D(G5) C-145-155-TDFB(3)-SSC6E(G5) C-147-155-TDFB(3)-SSC6(G5) C-147-155-TDFB(3)-SSC6D(G5) C-147-155-TDFB(3)-SSC6E(G5) C-149-155-TDFB(3)-SSC6(G5) C-149-155-TDFB(3)-SSC6D(G5) C-149-155-TDFB(3)-SSC6E(G5) C-151-155-TDFB(3)-SSC6(G5) C-151-155-TDFB(3)-SSC6D(G5) C-151-155-TDFB(3)-SSC6E(G5) C-153-155-TDFB(3)-SSC6(G5) C-153-155-TDFB(3)-SSC6D(G5) C-153-155-TDFB(3)-SSC6E(G5) C-155-155-TDFB(3)-SSC6(G5) C-155-155-TDFB(3)-SSC6D(G5) C-155-155-TDFB(3)-SSC6E(G5) C-157-155-TDFB(3)-SSC6(G5) C-157-155-TDFB(3)-SSC6D(G5) C-157-155-TDFB(3)-SSC6E(G5) C-159-155-TDFB(3)-SSC6(G5) C-159-155-TDFB(3)-SSC6D(G5) C-159-155-TDFB(3)-SSC6E(G5) C-161-155-TDFB(3)-SSC6(G5) C-161-155-TDFB(3)-SSC6D(G5) C-161-155-TDFB(3)-SSC6E(G5) -7- DS-6118 Rev 0.0 2010-05-10 P/N: C-1xx-155-TDFB(3)-SSC6x(-G5) 155 Mbps CWDM Laser Single Mode Transceiv Part Numbering Definition: C - 1xx - 155 - TDFB(3) - S SC TxPower Temperature and Package -RoHS Wavelength: Tx Wavelength = 1xx0 nm xx = 27, 29, 31, 33, 35, 37, 39, 41, 43, 45, 47, 49, 51, 53, 55, 57, 59, 61 Communication Protocol (155Mbps) 155 = PECL Signal Detection Output DFB laser Transceiver T = +5V Transceiver, FP T3= +3.3V Transceiver, FP Single mode fiber Connector Options Tx Power range 6= -3 to +2 dBm Temperature range and package Blank = commercial temperature(0 to 70 oC), 10.4 mm, Black case D = commercial temperature(0 to 70 oC), 9.8 mm, Black case E = commercial temperature(0 to 70 oC), 9.8 mm, Blue case RoHS Blank = RoHS non-compliant product G5 = RoHS 5/6-compliant product (lead exemption) -8- DS-6118 Rev 0.0 2010-05-10 P/N: C-1xx-155-TDFB(3)-SSC6x(-G5) 155 Mbps CWDM Laser Single Mode Transceiv Warnings Handling Precautions: This device is susceptible to damage as a result of electrostatic discharge (ESD). A static free environment is highly recommended. Follow guidelines according to proper ESD procedures. Laser Safety: Radiation emitted by laser devices can be dangerous to human eyes. Avoid eye exposure to direct or indirect radiation. Legal Notice IMPORTANT NOTICE! All information contained in this document is subject to change without notice, at Source Photonics' sole and absolute discretion. Source Photonics warrants performance of its products to current specifications only in accordance with the company's standard one-year warranty; however, specifications designated as "preliminary" are given to describe components only, and Source Photonics expressly disclaims any and all warranties for said products, including express, implied, and statutory warranties, warranties of merchantability, fitness for a particular purpose, and non-infringement of proprietary rights. Please refer to the company's Terms and Conditions of Sale for further warranty information. Source Photonics assumes no liability for applications assistance, customer product design, software performance, or infringement of patents, services, or intellectual property described herein. No license, either express or implied, is granted under any patent right, copyright, or intellectual property right, and Source Photonics makes no representations or warranties that the product(s) described herein are free from patent, copyright, or intellectual property rights. Products described in this document are NOT intended for use in implantation or other life support applications where malfunction may result in injury or death to persons. Source Photonics customers using or selling products for use in such applications do so at their own risk and agree to fully defend and indemnify Source Photonics for any damages resulting from such use or sale. THE INFORMATION CONTAINED IN THIS DOCUMENT IS PROVIDED ON AN "AS IS" BASIS. Customer agrees that Source Photonics is not liable for any actual, consequential, exemplary, or other damages arising directly or indirectly from any use of the information contained in this document. Customer must contact Source Photonics to obtain the latest version of this publication to verify, before placing any order, that the information contained herein is current. Contact U.S.A. Headquarters 20550 Nordhoff Street Chatsworth, CA 91311 USA Tel: +1-818-773-9044 Fax: +1-818-773-0261 sales@sourcephotonics.com China Building #2&5, West Export Processing Zone No. 8 Kexin Road, Hi-Tech Zone Chengdu, 611731, China Tel: +86-28-8795-8788 Fax: +86-28-8795-8789 sales@sourcephotonics.com.cn Taiwan 9F, No 81, Shui Lee Rd. Hsinchu, 300, Taiwan R.O.C. Tel: +886-3-5169222 Fax: +886-3-5169213 sales@sourcephotonics.com.tw (c) Copyright Source Photonics, Inc. 2007~2008 All rights reserved -9- DS-6118 Rev 0.0 2010-05-10