CNY171M, CNY172M, CNY173M, CNY174M, CNY17F1M, CNY17F2M, CNY17F3M, CNY17F4M, MOC8106M, MOC8107M Phototransistor Optocouplers Features Description UL recognized (File # E90700, Vol. 2) The CNY17XM, CNY17FXM and MOC810XM devices consist of a Gallium Arsenide IRED coupled with an NPN phototransistor in a dual in-line package. VDE recognized - Add option V (e.g., CNY17F2VM) - File #102497 Current transfer ratio in select groups High BVCEO: 70V minimum (CNY17XM, CNY17FXM, MOC810XM) Closely matched current transfer ratio (CTR) minimizes unit-to-unit variation. Very low coupled capacitance along with no chip to pin 6 base connection for minimum noise susceptability (CNY17FXM, MOC810XM) Package Outlines Applications Power supply regulators Digital logic inputs Microprocessor inputs Appliance sensor systems Industrial controls Schematics ANODE 1 6 NC CATHODE 2 5 COLLECTOR NC 3 4 EMITTER CNY17F1M/2M/3M/4M MOC8106M/7M (c)2006 Fairchild Semiconductor Corporation CNY17XM, CNY17FXM, MOC810XM Rev. 1.1.1 ANODE 1 6 BASE CATHODE 2 5 COLLECTOR NC 3 4 EMITTER CNY171M/2M/3M/4M www.fairchildsemi.com CNY17XM, CNY17FXM, MOC810XM -- Phototransistor Optocouplers November 2009 Symbol Parameters Value Units TOTAL DEVICE TSTG Storage Temperature -40 to +150 C TOPR Operating Temperature -40 to +100 C TJ TSOL PD Junction Temperature Lead Solder Temperature Total Device Power Dissipation @ 25C (LED plus detector) Derate Linearly From 25C -40 to +125 C 260 for 10 sec C 250 mW 2.94 mW/C EMITTER IF Continuous Forward Current 60 mA VR Reverse Voltage 6 V 1.5 A IF (pk) PD Forward Current - Peak (1s pulse, 300pps) LED Power Dissipation 25C Ambient 120 mW 1.41 mW/C Continuous Collector Current 50 mA VCEO Collector-Emitter Voltage 70 V VECO Emitter Collector Voltage 7 V 150 mW 1.76 mW/C Derate Linearly From 25C DETECTOR IC PD Detector Power Dissipation @ 25C Derate Linearly from 25C (c)2006 Fairchild Semiconductor Corporation CNY17XM, CNY17FXM, MOC810XM Rev. 1.1.1 www.fairchildsemi.com 2 CNY17XM, CNY17FXM, MOC810XM -- Phototransistor Optocouplers Absolute Maximum Ratings Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be operable above the recommended operating conditions and stressing the parts to these levels is not recommended. In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability. The absolute maximum ratings are stress ratings only. Individual Component Characteristics Symbol Parameters Test Conditions Device Min. Typ. Max. Units IF = 60mA CNY17XM, CNY17FXM 1.0 1.35 1.65 V IF = 10mA MOC810XM 1.0 1.15 1.50 EMITTER VF Input Forward Voltage CJ Capacitance VF = 0 V, f = 1.0MHz All 18 IR Reverse Leakage Current VR = 6V All 0.001 pF 10 A DETECTOR BVCEO Breakdown Voltage Collector to Emitter IC = 1.0mA, IF = 0 All 70 100 BVCBO Collector to Base IC = 10A, IF = 0 CNY171M/2M/3M/4M 70 120 BVECO Emitter to Collector IE = 100A, IF = 0 All 7 10 VCE = 10 V, IF = 0 All V ICEO Leakage Current Collector to Emitter ICBO Collector to Base VCB = 10 V, IF = 0 CNY171M/2M/3M/4M CCE Capacitance Collector to Emitter VCE = 0, f = 1MHz All 8 pF CCB Collector to Base VCB = 0, f = 1MHz CNY171M/2M/3M/4M 20 pF CEB Emitter to Base VEB = 0, f = 1MHz CNY171M/2M/3M/4M 10 pF 1 50 nA 20 nA Isolation Characteristics Symbol Characteristic Test Conditions Min. Typ.* Max. Units VISO Input-Output Isolation Voltage f = 60 Hz, t = 1 sec., II-O 2A(4) 7500 Vac(pk) RISO Isolation Resistance VI-O = 500 VDC(4) 1011 CISO Isolation Capacitance VI-O = O, f = 1MHz(4) 0.2 pF Transfer Characteristics (TA = 25C Unless otherwise specified.)(3) Symbol DC Characteristics Test Conditions Min. Typ.* Max. Units COUPLED (CTR)(2) Output Collector Current MOC8106M CNY17F1M VCE(sat) IF = 10mA, VCE = 10V MOC8107M 150 300 40 80 CNY17F2M 63 125 CNY17F3M 100 200 CNY17F4M 160 320 CNY171M 40 80 CNY172M 63 125 CNY173M 100 200 CNY174M 160 320 Collector-Emitter CNY17XM/FXM Saturation Voltage MOC8106M/7M IF = 10mA, VCE = 5V 50 100 IC = 2.5mA, IF = 10mA 0.4 % V IC = 500A, IF = 5.0mA *All typicals at TA = 25C (c)2006 Fairchild Semiconductor Corporation CNY17XM, CNY17FXM, MOC810XM Rev. 1.1.1 www.fairchildsemi.com 3 CNY17XM, CNY17FXM, MOC810XM -- Phototransistor Optocouplers Electrical Characteristics (TA = 25C Unless otherwise specified.)(1) (Continued) (TA = 25C Unless otherwise specified.)(1) Transfer Characteristics (Continued)(3) AC Characteristics(4) Symbol Test Conditions Min. Typ.* Max. Units NON-SATURATED SWITCHING TIME ton Turn-On Time All Devices IC = 2.0mA, VCC = 10V, RL = 100 2 10 s toff Turn-Off Time All Devices IC = 2.0mA, VCC = 10V, RL = 100 3 10 s td Delay Time CNY17XM/XFM IF = 10mA, VCC = 5V, RL = 75 5.6 s tr Rise Time All Devices IC = 2.0mA, VCC = 10V, RL = 100 CNY17XM/FXM IF = 10mA, VCC = 5V, RL = 75 1 s 4.0 ts Storage Time CNY17XM/FXM IF = 10mA, VCC = 5V, RL = 75 tf Fall Time All Devices IC = 2.0mA, VCC = 10V, RL = 100 CNY17XM/FXM IF = 10mA, VCC = 5V, RL = 75 3.5 CNY171M/F1M IF = 20mA, VCC = 5V, RL = 1k 5.5 CNY172M/3M/4M CNY17F2M/F3M/F4M IF = 10mA, VCC = 5V, RL = 1k 8.0 4.1 2 s s SATURATED SWITCHING TIMES ton tr td toff tf ts Turn-on Time Rise Time Delay Time Turn-off Time Fall Time Storage Time CNY171M/F1M IF = 20mA, VCC = 5V, RL = 1k 4.0 CNY172M/3M/4M CNY17F2M/F3M/F4M IF = 10mA, VCC = 5V, RL = 1k 6.0 CNY171M/F1M IF = 20mA, VCC = 5V, RL = 1k 5.5 CNY172M/3M/4M CNY17F2M/F3M/F4M IF = 10mA, VCC = 5V, RL = 1k 8.0 CNY171M/F1M IF = 20mA, VCE = 0.4V 34 CNY172M/3M/4M CNY17F2M/F3M/F4M IF = 10mA, VCE = 0.4V 39 CNY171M/F1M IF = 20mA, VCC = 5V, RL = 1k 20.0 CNY172M/3M/4M CNY17F2M/F3M/F4M IF = 10mA, VCC = 5V, RL = 1k 24.0 CNY171M/F1M IF = 20mA, VCC = 5V, RL = 1k 34.0 CNY172M/3M/4M IF = 10mA, VCC = 5V, RL = 1k CNY17F2M/F3M/F4M s s s s s s 39.0 *All typicals at TA = 25C Notes: 1. 2. 3. 4. Always design to the specified minimum/maximum electrical limits (where applicable). Current Transfer Ratio (CTR) = IC/IF x 100%. For test circuit setup and waveforms, refer to Figures 10 and 11. For this test, Pins 1 and 2 are common, and Pins 4 are 5 are common. (c)2006 Fairchild Semiconductor Corporation CNY17XM, CNY17FXM, MOC810XM Rev. 1.1.1 www.fairchildsemi.com 4 CNY17XM, CNY17FXM, MOC810XM -- Phototransistor Optocouplers Electrical Characteristics As per IEC 60747-5-2, this optocoupler is suitable for "safe electrical insulation" only within the safety limit data. Compliance with the safety ratings shall be ensured by means of protective circuits. Symbol Parameter Min. Typ. Max. Unit Installation Classifications per DIN VDE 0110/1.89 Table 1 For Rated Main Voltage < 150Vrms I-IV For Rated Main voltage < 300Vrms I-IV Climatic Classification 55/100/21 Pollution Degree (DIN VDE 0110/1.89) 2 CTI Comparative Tracking Index 175 VPR Input to Output Test Voltage, Method b, VIORM x 1.875 = VPR, 100% Production Test with tm = 1 sec, Partial Discharge < 5pC 1594 Vpeak Input to Output Test Voltage, Method a, VIORM x 1.5 = VPR, Type and Sample Test with tm = 60 sec, Partial Discharge < 5pC 1275 Vpeak VIORM Max. Working Insulation Voltage Vpeak 850 Vpeak VIOTM Highest Allowable Over Voltage Vpeak 6000 Vpeak External Creepage 7 mm External Clearance 7 mm Insulation Thickness 0.5 mm Insulation Resistance at Ts, VIO = 500V 109 RIO (c)2006 Fairchild Semiconductor Corporation CNY17XM, CNY17FXM, MOC810XM Rev. 1.1.1 www.fairchildsemi.com 5 CNY17XM, CNY17FXM, MOC810XM -- Phototransistor Optocouplers Safety and Insulation Ratings CNY17XM, CNY17FXM, MOC810XM -- Phototransistor Optocouplers Typical Performance Characteristics Fig. 2 Normalized CTR vs. Ambient Temperature Fig. 1 Normalized CTR vs. Forward Current 1.4 1.6 VCE = 5.0V TA = 25C 1.4 Normalized to IF = 10mA 1.2 IF = 5mA 1.2 NORMALIZED CTR 1.0 NORMALIZED CTR 1.0 0.8 0.6 IF = 10mA 0.8 IF = 20mA 0.6 0.4 0.4 0.2 Normalized to: IF = 10mA TA = 25C 0.0 0 2 4 6 8 10 12 14 16 18 0.2 -60 20 -40 -20 0 20 40 60 80 100 IF - FORWARD CURRENT (mA) TA - AMBIENT TEMPERATURE (C) Fig. 4 CTR vs. RBE (Saturated) NORMALIZED CTR ( CTRRBE / CTRRBE(OPEN)) NORMALIZED CTR ( CTRRBE / CTRRBE(OPEN)) Fig. 3 CTR vs. RBE (Unsaturated) 1.0 0.9 IF = 20mA 0.8 IF = 10mA IF = 5mA 0.7 0.6 0.5 0.4 0.3 0.2 VCE = 5.0V 0.1 0.0 10 100 1000 1.0 0.9 0.8 VCE = 0.3V IF = 20mA 0.7 0.6 0.5 IF = 10mA 0.4 0.3 IF = 5mA 0.2 0.1 0.0 10 100 RBE - BASE RESISTANCE (k) 1000 RBE - BASE RESISTANCE (k) Fig. 5 Switching Speed vs. Load Resistor 1000 Fig. 6 Normalized ton vs. RBE IF = 10mA VCC = 10V TA = 25C NORMALIZED ton - (ton(RBE) / ton(open)) 5.0 SWITCHING SPEED (s) 100 Tf Toff 10 Ton Tr 1 4.0 3.5 3.0 2.5 2.0 1.5 1.0 0.5 10 0.1 0.1 1 10 VCC = 10V IC = 2mA RL = 100 4.5 100 1000 10000 100000 RBE - BASE RESISTANCE (k) 100 R - LOAD RESISTOR (k) (c)2006 Fairchild Semiconductor Corporation CNY17XM, CNY17FXM, MOC810XM Rev. 1.1.1 www.fairchildsemi.com 6 Fig. 8 LED Forward Voltage vs. Forward Current 1.8 Fig. 7 Normalized toff vs. RBE 1.7 1.3 1.2 VF - FORWARD VOLTAGE (V) NORMALIZED toff - (toff(RBE) / toff(open)) 1.4 1.1 1.0 0.9 0.8 0.7 0.6 0.5 VCC = 10V IC = 2mA RL = 100 0.4 0.3 1.6 1.5 1.4 TA = -55C 1.3 TA = 25C 1.2 TA = 100C 0.2 1.1 0.1 10 100 1000 10000 100000 1.0 RBE - BASE RESISTANCE (k ) 1 10 100 IF - LED FORWARD CURRENT (mA) VCE (SAT) - COLLECTOR-EMITTER SATURATION VOLTAGE (V) Fig. 9 Collector-Emitter Saturation Voltage vs Collector Current 100 TA = 25C 10 1 IF = 2.5mA 0.1 IF = 20mA 0.01 IF = 5mA IF = 10mA 0.001 0.01 0.1 1 10 IC - COLLECTOR CURRENT (mA) VCC INPUT PULSE IF IC INPUT 10% RL OUTPUT PULSE 90% OUTPUT (VCE) ts td tr ton toff Figure 11. Switching Time Waveforms Figure 10. Switching Time Test Circuit (c)2006 Fairchild Semiconductor Corporation CNY17XM, CNY17FXM, MOC810XM Rev. 1.1.1 tf www.fairchildsemi.com 7 CNY17XM, CNY17FXM, MOC810XM -- Phototransistor Optocouplers Typical Performance Characteristics (Continued) Through Hole 0.4" Lead Spacing 8.13-8.89 6 4 8.13-8.89 6 4 1 3 6.10-6.60 6.10-6.60 Pin 1 1 3 Pin 1 5.08 (Max.) 0.25-0.36 7.62 (Typ.) 3.28-3.53 5.08 (Max.) 0.25-0.36 3.28-3.53 0.38 (Min.) 2.54-3.81 0.38 (Min.) 2.54-3.81 0.20-0.30 2.54 (Bsc) (0.86) 15 (Typ.) 2.54 (Bsc) (0.86) 0.41-0.51 1.02-1.78 0.20-0.30 0.41-0.51 0.76-1.14 10.16-10.80 1.02-1.78 0.76-1.14 Surface Mount (1.78) 8.13-8.89 6 4 (1.52) (2.54) (7.49) 6.10-6.60 8.43-9.90 (10.54) 1 3 (0.76) Pin 1 Rcommended Pad Layout 0.25-0.36 3.28-3.53 5.08 (Max.) 0.38 (Min.) 0.20-0.30 2.54 (Bsc) (0.86) 0.16-0.88 (8.13) 0.41-0.51 1.02-1.78 0.76-1.14 Note: All dimensions in mm. (c)2006 Fairchild Semiconductor Corporation CNY17XM, CNY17FXM, MOC810XM Rev. 1.1.1 www.fairchildsemi.com 8 CNY17XM, CNY17FXM, MOC810XM -- Phototransistor Optocouplers Package Dimensions Option Order Entry Identifier (Example) No option CNY171M S CNY171SM SR2 CNY171SR2M T CNY171TM 0.4" Lead Spacing V CNY171VM IEC60747-5-2 TV CNY171TVM IEC60747-5-2, 0.4" Lead Spacing SV CNY171SVM IEC60747-5-2, Surface Mount SR2V CNY171SR2VM Description Standard Through Hole Device Surface Mount Lead Bend Surface Mount; Tape and Reel IEC60747-5-2, Surface Mount, Tape and Reel Marking Information 1 V 3 CNY17-1 2 X YY Q 6 4 5 Definitions 1 Fairchild logo 2 Device number 3 VDE mark (Note: Only appears on parts ordered with VDE option - See order entry table) 4 One digit year code, e.g., `7' 5 Two digit work week ranging from `01' to `53' 6 Assembly package code (c)2006 Fairchild Semiconductor Corporation CNY17XM, CNY17FXM, MOC810XM Rev. 1.1.1 www.fairchildsemi.com 9 CNY17XM, CNY17FXM, MOC810XM -- Phototransistor Optocouplers Ordering Information 12.0 0.1 4.5 0.20 2.0 0.05 O1.5 MIN 4.0 0.1 0.30 0.05 1.75 0.10 11.5 1.0 21.0 0.1 9.1 0.20 O1.5 0.1/-0 10.1 0.20 0.1 MAX 24.0 0.3 User Direction of Feed Reflow Profile 300 260C 280 260 >245C = 42 Sec 240 220 200 180 C Time above 183C = 90 Sec 160 140 120 1.822C/Sec Ramp up rate 100 80 60 40 33 Sec 20 0 0 60 120 180 270 360 Time (s) (c)2006 Fairchild Semiconductor Corporation CNY17XM, CNY17FXM, MOC810XM Rev. 1.1.1 www.fairchildsemi.com 10 CNY17XM, CNY17FXM, MOC810XM -- Phototransistor Optocouplers Carrier Tape Specification Auto-SPMTM Build it NowTM CorePLUSTM CorePOWERTM CROSSVOLTTM CTLTM Current Transfer LogicTM EcoSPARK(R) EfficentMaxTM EZSWITCHTM* TM* (R) (R) Fairchild (R) Fairchild Semiconductor FACT Quiet SeriesTM FACT(R) FAST(R) FastvCoreTM FETBenchTM FlashWriter(R)* FPSTM F-PFSTM FRFET(R) SM Global Power Resource Green FPSTM Green FPSTM e-SeriesTM GmaxTM GTOTM IntelliMAXTM ISOPLANARTM MegaBuckTM MICROCOUPLERTM MicroFETTM MicroPakTM MillerDriveTM MotionMaxTM Motion-SPMTM OPTOLOGIC(R) OPTOPLANAR(R) (R) PDP SPMTM Power-SPMTM PowerTrench(R) PowerXSTM Programmable Active DroopTM QFET(R) QSTM Quiet SeriesTM RapidConfigureTM TM Saving our world, 1mW/W/kW at a timeTM SmartMaxTM SMART STARTTM SPM(R) STEALTHTM SuperFETTM SuperSOTTM-3 SuperSOTTM-6 SuperSOTTM-8 SupreMOSTM SyncFETTM Sync-LockTM (R) * The Power Franchise(R) TinyBoostTM TinyBuckTM TinyLogic(R) TINYOPTOTM TinyPowerTM TinyPWMTM TinyWireTM TriFault DetectTM TRUECURRENTTM* SerDesTM UHC(R) Ultra FRFETTM UniFETTM VCXTM VisualMaxTM XSTM * Trademarks of System General Corporation, used under license by Fairchild Semiconductor. DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION, OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. THESE SPECIFICATIONS DO NOT EXPAND THE TERMS OF FAIRCHILD'S WORLDWIDE TERMS AND CONDITIONS, SPECIFICALLY THE WARRANTY THEREIN, WHICH COVERS THESE PRODUCTS. LIFE SUPPORT POLICY FAIRCHILD'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury of the user. 2. A critical component in any component of a life support, device, or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. ANTI-COUNTERFEITING POLICY Fairchild Semiconductor Corporation's Anti-Counterfeiting Policy. Fairchild's Anti-Counterfeiting Policy is also stated on our external website, www.fairchildsemi.com, under Sales Support. Counterfeiting of semiconductor parts is a growing problem in the industry. All manufacturers of semiconductor products are experiencing counterfeiting of their parts. Customers who inadvertently purchase counterfeit parts experience many problems such as loss of brand reputation, substandard performance, failed applications, and increased cost of production and manufacturing delays. Fairchild is taking strong measures to protect ourselves and our customers from the proliferation of counterfeit parts. Fairchild strongly encourages customers to purchase Fairchild parts either directly from Fairchild or from Authorized Fairchild Distributors who are listed by country on our web page cited above. Products customers buy either from Fairchild directly or from Authorized Fairchild Distributors are genuine parts, have full traceability, meet Fairchild's quality standards for handling and storage and provide access to Fairchild's full range of up-to-date technical and product information. Fairchild and our Authorized Distributors will stand behind all warranties and will appropriately address any warranty issues that may arise. Fairchild will not provide any warranty coverage or other assistance for parts bought from Unauthorized Sources. Fairchild is committed to combat this global problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized distributors. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Product Status Advance Information Formative / In Design Preliminary First Production No Identification Needed Full Production Obsolete Not In Production Definition Datasheet contains the design specifications for product development. Specifications may change in any manner without notice. Datasheet contains preliminary data; supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve design. Datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve the design. Datasheet contains specifications on a product that is discontinued by Fairchild Semiconductor. The datasheet is for reference information only. Rev. I40 (c)2006 Fairchild Semiconductor Corporation CNY17XM, CNY17FXM, MOC810XM Rev. 1.1.1 www.fairchildsemi.com 11 CNY17XM, CNY17FXM, MOC810XM -- Phototransistor Optocouplers TRADEMARKS The following includes registered and unregistered trademarks and service marks, owned by Fairchild Semiconductor and/or its global subsidiaries, and is not intended to be an exhaustive list of all such trademarks.