SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
D
D1
APEM
, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com
MISCELLANEOUS HARDWARE
& ACCESSORIES
SWITCH HARDWARE....................................... D2 - D4
PUSHBUTTON AND TOGGLE CAPS............... D5 - D6
SECURITY GUARDS......................................... D7 - D9
SEALING BOOTS.............................................. D10 - D14
VL SERIES LED INDICATORS.......................... D15 - D16
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
D
D2
APEM
, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com
MISCELLANEOUS HARDWARE
HEX NUT A112 Nickel plated brass
1/4-40
PANEL DRESS NUT A274
Nickel plated brass 1/4-40
HEX NUT A465
Nickel plated brass 15/32-32
HEX NUT Brass 1/4-40
Nickel plated U76 Matte black U94
HEX NUT Brass 15/32-32
Nickel plated U162 Matte black U41
Chrome plated U92
HEX NUT Brass 12mm (.472")
Nickel plated U166 Matte black U183
Chrome plated U212
6.35 DIA-40UNS
1.60
8.00
(.062)
(1/4-40UNS)
(.314)
(.551) (.090)
14.00 2.30
11.90 DIA-32UNS
(15/32-32UNS)
HEX NUT U842 10mm (.393")
Nickel plated brass
(.472) (.090)
12.00
12.00
2.30
2.30
10.00 DIA x 0.75 SI
10.00 DIA x 0.75 SI
(.393 DIA X 0.75 SI)
(.393 DIA X 0.75 SI)
HEX CAP NUT Brass 12mm (.472")
Chrome plated U35
PAL NUT U42 12mm (.472")
Zinc plated steel
HEX NUT U1950-5 19mm (.748")
Nickel plated brass
(.748 DIAx1.00 IS)
(.748 DIAx1.00 IS)
19.00 DIAx1.00 SI
19.00 DIAx1.00 SI
(.118)
(.118)
3.00
3.00
(.866)
(.866)
22.00
22.00
HEX NUT 10-855-5 19mm (.748")
Nickel plated brass
22.00
22.00
(.866)
(.866)
(.748 DIAx1.00 IS)
(.748 DIAx1.00 IS)
19.00 DIAx1.00 SI
19.00 DIAx1.00 SI
4.00
4.00
(.157)
(.157)
1.30-45
1.30-45
(.051-45 )
(.051-45 )
HEX NUT U1951-5 22mm (.866")
Nickel plated brass
(.866 DIAx1.00 IS)
(.866 DIAx1.00 IS)
22.00 DIAx1.00 SI
22.00 DIAx1.00 SI
3.00
3.00
(.118)
(.118)
(.984)
(.984)
25.00
25.00
PANEL DRESS NUT A540
Nickel plated brass 15/32-32
PANEL DRESS NUT A168P1
Blind thread, Nickel plated brass
1/4-40
PANEL DRESS NUT A168P2
Thru thread, Nickel plated brass
1/4-40
HEX NUT 10-856-5 22mm (.866")
Nickel plated brass
22.00 DIAx1.00 SI
22.00 DIAx1.00 SI
(.866 DIAx1.00 IS)
(.866 DIAx1.00 IS)
(.157)
(.157)
4.00
4.00
25.00
25.00
(.984)
(.984)
(.051-45 )
(.051-45 )
1.30-45
1.30-45
(.354)
(.354)
(.078)
(.078)
9.00
9.00
2.00
2.00
6.00 DIA
6.00 DIA
x 0.75 SI
x 0.75 SI
(.236 DIA
(.236 DIA
x 0.75SI)
x 0.75SI)
HEX NUT Brass
Nickel plated U208 Matte black U726
(.472)
(.086)
2.00
12.00
6.00 DIA x 0.75 SI
(.236 DIA x 0.75SI)
HEX NUT Brass
Chrome plated U1916
19.00
19.00
(.748)
(.748)
(.629 DIAx1.00 IS)
(.629 DIAx1.00 IS)
16.00 DIAx1.00 SI
16.00 DIAx1.00 SI
3.00
3.00
(.118)
(.118)
1.20-45
1.20-45
(.047-45 )
(.047-45 )
HEX NUT 10-621 16mm (.629")
Nickel plated brass
24.00 DIAx1.00 SI
24.00 DIAx1.00 SI
(.944 DIAx1.00 IS)
(.944 DIAx1.00 IS)
(.157)
(.157)
4.00
4.00
27.00
27.00
(1.062)
(1.062)
(.051-45 )
(.051-45 )
1.30-45
1.30-45
HEX NUT U2059-5 24mm (.944")
Nickel plated brass
(.09)
(.09)
(.551)
(.551)
2.30
2.30
14.00
14.00
(.472DIA X 0.75SI)
(.472DIA X 0.75SI)
12.00DIA X 0.75SI
12.00DIA X 0.75SI
(.629)
(.629)
(.137)
(.137)
16.00
16.00
3.50
3.50
12.00DIA X 0.75SI
12.00DIA X 0.75SI
(.472DIA X 0.75SI)
(.472DIA X 0.75SI)
16.00
16.00
(.629)
(.629)
(.086)
(.086)
2.20
2.20
12.00DIA X 0.75SI
12.00DIA X 0.75SI
(.472DIA X 0.75SI)
(.472DIA X 0.75SI)
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
D
D3
APEM
, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com
MISCELLANEOUS HARDWARE (CONT'D.)
DECORATIVE NUT A447
Thru thread, chromium plated brass
1/4-40
KNURLED NUT U369 1/4-40
Nickel plated brass
(1/4-40UNS)
(1/4-40UNS)
(.303 DIA)
(.303 DIA)
(.100)
(.100)
7.70 DIA
7.70 DIA
2.54
2.54
6.35 DIA-40UNS
6.35 DIA-40UNS
KNURLED NUT U501 1/4-40
Chrome plated brass
(.078)
(.078)
(.314 DIA)
(.314 DIA)
(1/4-40UNS)
(1/4-40UNS)
(.204 DIA)
(.204 DIA)
6.35 DIA-40UNS
6.35 DIA-40UNS
8.00 DIA
8.00 DIA
2.00
2.00
5.20 DIA
5.20 DIA
KNURLED NUT Brass 1/4-40
Nickel plated U229 Matte black U230
(1/4-40UNS)
(1/4-40UNS)
(.354 DIA)
(.354 DIA)
(.086)
(.086)
9.00 DIA
9.00 DIA
2.20
2.20
6.35 DIA-40UNS
6.35 DIA-40UNS
KNURLED CAP NUT Brass 1/4-40
Chrome plated U216 Matte black U218
(.354 DIA) (.106)
(.204 DIA)
(1/4-40UNS)
6.35 DIA-40UNS
9.00 DIA 2.70
5.20 DIA
KNURLED CAP NUT Brass 1/4-40
Chrome pl. U268 Matte black U725
(.472 DIA)
(.472 DIA)
(.102)
(.102)
(.188 DIA)
(1/4-40UNS)
(1/4-40UNS)
6.35 DIA-40UNS
6.35 DIA-40UNS
2.60
2.60
12.00 DIA
12.00 DIA
4.80 DIA
KNURLED NUT U2311 10mm (.393")
Chrome plated brass
(.551 DIA)
(.551 DIA)
(.086)
(.086)
14.00 DIA
14.00 DIA
2.20
2.20
10.00 DIA x 0.75 SI
10.00 DIA x 0.75 SI
(.393 DIA X 0.75 SI)
(.393 DIA X 0.75 SI)
KNURLED CAP NUT U2220
10mm (.393") Chrome plated brass
(.551 DIA)
(.551 DIA)
(.393 DIA X 0.75 SI)
(.393 DIA X 0.75 SI)
(.157)
(.157)
(.259 DIA)
(.259 DIA)
14.00 DIA
14.00 DIA
4.00
4.00
10.00 DIA x 0.75 SI
10.00 DIA x 0.75 SI
6.60 DIA
6.60 DIA
KNURLED NUT Brass 15/32-32
Nickel plated U53 Matte black U1634
(.629 DIA)
(.629 DIA)
(15/32-32UNS)
(15/32-32UNS)
(.098)
(.098)
16.00 DIA
16.00 DIA
2.50
2.50
11.90 DIA-32UNS
11.90 DIA-32UNS
KNURLED CAP NUT U123 15/32-32
Chrome plated brass
(.629 DIA)
(.629 DIA)
(.157)
(.157)
(.342 DIA)
(.342 DIA)
16.00 DIA
16.00 DIA
4.00
4.00
8.70 DIA
8.70 DIA
11.90 DIA-32UNS
11.90 DIA-32UNS
(15/32-32UNS)
(15/32-32UNS)
KNURLED CAP NUT U124 15/32-32
Chrome plated brass
(.629 DIA)
(.629 DIA)
(.322 DIA)
(.322 DIA)
(.157)
(.157)
16.00 DIA
16.00 DIA
4.00
4.00
8.20 DIA
8.20 DIA
11.90 DIA-32UNS
11.90 DIA-32UNS
(15/32-32UNS)
(15/32-32UNS)
PANEL DRESS NUT Brass 12mm
(.472") Nickel plated U411, Matte
black U413, Chrome plated U412
(.098)
(.098)
2.50
2.50
16.00 DIA
16.00 DIA
(.63 DIA)
(.63 DIA)
KNURLED CAP NUT Brass
12mm (.472") Chrome plated U117
Matte black U129
16.00 DIA
16.00 DIA
(.629 DIA)
(.629 DIA)
(.157)
(.157)
4.00
4.00
8.5 (.334)
8.5 (.334)
KNURLED CAP NUT Brass
12mm (.472") Chrome plated U118
Matte black U130
16.00 DIA
(.629 DIA) (.157)
4.00
10.3 (.405)
10.3 (.405)
INSULATED PANEL DRESS NUT
12mm (.472") ABS or polyamide with
glass fiber. blue U521, black U522,
green U523, gray U524, yellow U525,
red U526, white U527/1, orange U529
(.157)
(.157)
4.00
4.00
(.669 DIA)
(.669 DIA)
17.00 DIA
17.00 DIA
KNURLED NUT U1977-5
19mm (.748") Nickel plated brass
(.866 DIA)
(.866 DIA)
22.00 DIA
22.00 DIA
(.177)
(.177)
4.50
4.50
(.748 DIAx1.00 IS)
(.748 DIAx1.00 IS)
19.00 DIAx1.00 SI
19.00 DIAx1.00 SI
(.118)
(.118)
3.00
3.00
(.051-45 )
(.051-45 )
1.30-45
1.30-45
(.086)
(.086)
(.354 DIA)
(.354 DIA)
9.00 DIA
9.00 DIA
2.20
2.20
6.00 DIA
6.00 DIA
x 0.75 SI
x 0.75 SI
(.236 DIA
(.236 DIA
x 0.75SI)
x 0.75SI)
KNURLED NUT U826
Nickel plated brass
(.354 DIA)
(.354 DIA)
(.106)
(.106)
(.204 DIA)
9.00 DIA
9.00 DIA
2.70
2.70
5.20 DIA
6.00 DIA
6.00 DIA
x 0.75 SI
x 0.75 SI
(.236 DIA
(.236 DIA
x 0.75SI)
x 0.75SI)
KNURLED CAP NUT Brass
Chrome pl. U461 Matte black U502
(.472 DIA)
(.472 DIA)
(.188 DIA)
(.188 DIA)
(.102)
(.102)
12.00 DIA
12.00 DIA
2.60
2.60
4.80 DIA
4.80 DIA
6.00 DIA
6.00 DIA
x 0.75 SI
x 0.75 SI
(.236 DIA
(.236 DIA
x 0.75SI)
x 0.75SI)
KNURLED CAP NUT Brass
Chrome plated U232
KNURLED NUT 10-960-5
16mm (.629") Nickel plated brass
(.728 DIA)
(.728 DIA)
18.50 DIA
18.50 DIA
(.629 DIAx1.00 IS)
(.629 DIAx1.00 IS)
16.00 DIAx1.00 SI
16.00 DIAx1.00 SI
(.118)
3.00
(.047 - 45 )
(.047 - 45 )
1.20 - 45
1.20 - 45
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
D
D4
APEM
, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com
MISCELLANEOUS HARDWARE (CONT'D.)
LOCKWASHER U14 .122 I.D.
(.122 DIA)
(.228 DIA)
(.015)
(.015)
5.80 DIA
3.10 DIA
0.40
0.40
LOCKWASHER 1/4
Stainless steel U215
(.374 DIA)
(.374 DIA)
(.255 DIA)
(.255 DIA)
(.015)
(.015)
(.031)
(.031)
9.50 DIA
9.50 DIA
6.50 DIA
6.50 DIA
0.80
0.80
0.40
0.40
LOCKWASHER A115
Nickel plated steel 1/4
LOCKWASHER U843 10mm (.393")
Stainless steel
(.566 DIA)
(.405 DIA)
(.019)
(.055)
1.40
0.50
14.40 DIA
10.30 DIA
LOCKWASHER A466
Nickel plated steel 15/32
LOCKWASHER U13 15/32
Zinc plated
(.669 DIA)
(.669 DIA)
(.019)
(.019)
(.055)
(.055)
(.476 DIA)
(.476 DIA)
17.00 DIA
17.00 DIA
0.50
0.50
12.10 DIA
12.10 DIA
1.40
1.40
ANTI-ROTATE RING A107
Nickel plated brass 1/4
LOCKING RING 1/4
Nickel plated U78 Matte black U93
5.20
5.20
0.806.50 DIA
9.60 DIA
2.00
(.031)
(.078)
(.204)
(.204)
(.255 DIA)
(.377 DIA)
ANTI-ROTATE RING (LARGE) A158
Nickel plated brass 1/4
LOCKING RING U844 10mm (.393")
Nickel plated
(.551 DIA)
(.551 DIA)
(.401 DIA)
(.401 DIA)
(.370)
(.370)
(.043)
(.043)
(.098)
(.098)
(.222)
(.222)
14.00 DIA
14.00 DIA
2.50
2.50
1.10
1.10
10.20 DIA
10.20 DIA
5.65
5.65
9.40
9.40
ANTI-ROTATE RING A482
Nickel plated brass 15/32
LOCKING RING 12mm (.472")
Nickel plated U121 Matte black U12
(.716 DIA)
(.716 DIA)
(.480 DIA)
(.480 DIA)
(.440)
(.031)
(.031)
(.090)
(.090)
(.377)
18.20 DIA
18.20 DIA
0.80
0.80
2.30
2.30
12.20 DIA
12.20 DIA
9.60
11.20
SEALING WASHER U360 1/4-40
For keyway bushing
(.417 DIA)
(.090)
(.090)
(.464 DIA)
(.251 DIA)
(.251 DIA)
(.228)
10.60 DIA
11.80 DIA
5.80
2.30
2.30
6.40 DIA
6.40 DIA
SEALING WASHER U60 15/32
(.669 DIA)
(.669 DIA)
(.437)
(.437)
(.590 DIA)
(.590 DIA)
(.472 DIA)
(.472 DIA)
(.110)
(.110)
17.00 DIA
17.00 DIA
11.10
11.10
15.00 DIA
15.00 DIA
12.00 DIA
12.00 DIA
2.80
2.80
SEALING WASHER Nylon
12mm (.472") U21
(.039)
(.039)
(.48 DIA)
(.48 DIA)
(.716 DIA)
(.716 DIA)
18.20 DIA
18.20 DIA
12.20 DIA
12.20 DIA
1.00
1.00
GROUND CONNECTOR
12mm (.472") Nickel plated U187
(.48 DIA)
(.48 DIA)
(.826 DIA)
(.826 DIA)
(.031)
(.031)
(.25)
(.25)
21.00 DIA
21.00 DIA
6.35
6.35
12.20 DIA
12.20 DIA
0.80
0.80
SWITCH PLATE I-O U1050
.480 I.D.
I
(1.102)
(1.102)
(.019)
(.019)
28.00
28.00
0.50
0.50
(.48 DIA)
(.48 DIA)
12.20 DIA
12.20 DIA
(.708 DIA)
(.708 DIA)
18.00 DIA
18.00 DIA
SWITCH PLATE ON-OFF U19
.480 I.D.
ON
ON
OFF
OFF
0.5028.00 (.019)
(1.102)
(.48 DIA)
(.48 DIA)
12.20 DIA
12.20 DIA
18.00 DIA
18.00 DIA
(.708 DIA)
(.708 DIA)
CONNECTING SCREW U03
(.177)
(.177)
(.236 DIA)
(.236 DIA)
3.00 DIAx0.5
3.00 DIAx0.5
(.118 DIAx0.5)
(.118 DIAx0.5)
6.00 DIA
6.00 DIA
4.50
4.50
LOCKING RING Brass
Nickel plated U198 Matte black U728
(.240 DIA)
(.240 DIA)
(.244)
(.244)
(.464 DIA)
(.464 DIA)
(.216)
(.216)
(.031)
(.031)
(.078)
(.078)
5.50
5.50
6.20
6.20
11.80 DIA
11.80 DIA
2.00
2.00
6.10 DIA
6.10 DIA
0.80
0.80
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
D
D5
APEM
, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com
MISCELLANEOUS PUSHBUTTON ACCESSORIES & CAPS
PANEL DRESS NUTS & CAPS FOR PUSHBUTTON SWITCHES
ASSEMBLY FITS SWITCH OPTION(S) INCLUDES
NUMBER MODEL REQUIRED DRESS NUT CAP
A1354P1 810/820 KM A495P1 B494P1
A1354P2 401/402 S A495P1 B494P2
A1354P3 PB PY A495P1 B494P3
A1355P1 810/820 KM A495P2 B494P1
A1355P2 302 NONE A495P2 B494P2
A1355P2 401/402 NONE A495P2 B494P2
A1355P3 PB PY or P2Y1 A495P2 B494P3
PART NO. A DIA. B DIA.
A495P1 .385 .323
A495P2 .413 .245
'A' dimension is determined by
panel thickness indicated in table
and allows for (1) back-up Nut
A112 and (1) Lockwasher A115.
Order these separately to provide
for secure, vibration resistant
mounting.
SWITCH OPTION A1354 A1355
MODEL (IF REQ'D) A P.T. A P.T.
810/820 KM .040 .062 .090 .093
PB PY .100 .125 .135 .171
PB P2Y1 - - .120 .093
302 - - - .070 .078
401/402 - - - .130 .078
401/402 S .130 .062 - -
Order Assembly Number from chart to left. Add cap color no.
from color code chart below. Example: A1354P36 indicates
assembly to fit a PB switch and is supplied with a red cap.
COLOR CAP Vinyl plastisol PUSHBUTTON CAPS (ALL) PUSHBUTTON CAP A212
COLOR CAPS B366 & B497 PUSHBUTTON CAPS A180 & A496
PUSHBUTTON CAP A235 PUSHBUTTON CAP A420
Material - Nylon
Caps press fit adequately, however
they may be pulled off. If permanent
retention is required, cement with
Loctite 405 or equivalent, insuring
no cement enters switch.
PART NO. DIM. A FITS ACTUATOR
A118 5/16 K
A391 3/16 L2
A392 3/4 L
FITS PB SERIES
B366 fits 300 & 400 Series with
S option only, and all PB Series.
B497 fits 800 Series with options
KM, KS, KM1, K1M1 & K2M1.
A180 fits all PB Series.
A496 fits 800 Series with options
KM, KS, KM1, K1M1, K2M, K2S
&K2M1.
* - fits all PB, 300 & 400 Series.
** - fits 800 Series with options
KM, KS, KM1 & K2M1.
* - Fits all 300 Series except 301
& 305. Fits 301 & 305 with S
option. Fits all 400 & PB Series.
** - Fits 800 Series withoptions KM,
KS, KM1 & K2M1.
Code Color Code Color
1blue 2black
3green 4gray
5yellow 6red
7ivory 8white
9orange
STANDARD COLOR CODE
For nylon caps, actuators, bezels & bezel inserts.
To specify, add selected color code to part number. Example: A2122 is a
black A212 Cap.To specify for actuators, bezels and bezel inserts, see
'Order Format' section following specific series information in this catalog.
Note: additional caps are
shown in some switch sections.
(P.T.)
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
D
D6
APEM
, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com
COLOR CAP B494 PUSHBUTTON CAP A631
PUSHBUTTON CAP A632 CUSTOM MARKING
** - P1 fits all 800 Series except
K1M & K1S.
* - P2 fits all 300 & 400 Series.
* - P3 fits all PB Series.
* - Fits all 300 Series except 301
& 305. Fits 301 & 305 with S
option. Fits all 400 & PB Series.
** - Fits 800 Series with options KM,
KS, KM1 & K2M1.
Fits all PB Series. Permanent ink marking is available
for switch caps, bezels and rocker
actuators. Consult factory with your
special requirement. Representative
samples available.
Code Color Code Color
1 blue 2black
3green 4gray
5yellow 6red
7ivory 8white
9orange
STANDARD COLOR CODE
For nylon caps, actuators, bezels & bezel inserts.
To specify, add selected color code to part number. Example: A2122 is a
black A212 Cap.To specify for actuators, bezels and bezel inserts, see
'Order Format' section following specific series information in this catalog.
SWITCH GUARDS
Materials: 5056-H18 aluminum with clear or black anodize, or free machining brass withbright chrome plate.
Dimensions in inches and (millimeters). Tolerances: A & D, ±.015" B & C, ±.005"
MODEL TH'D. COLOR FINISH A B C D
MG11A 10-48 NATURAL AL PLAIN
MG11B 10-48 BLACK AL. PLAIN
MG12A 1/4-40 NATURAL AL. PLAIN
MG12B 1/4-40 BLACK AL. PLAIN .530 (13.5) .413 (10.5) .315 (8.0) .236 (6.0)
MG12C 1/4-40 CHROMED BR. PLAIN
MG12KA 1/4-40 NATURAL AL. KNURLED
MG12KB 1/4-40 BLACK AL. KNURLED
MG12KC 1/4-40 CHROMED BR. KNURLED
MG13A 1/4-40 NATURAL AL. PLAIN
MG13B 1/4-40 BLACK AL. PLAIN .730 (18.5) .610 (15.5) .315 (8.0) .236 (6.0)
MG13C 1/4-40 CHROMED BR. PLAIN
MISCELLANEOUS PUSHBUTTON ACCESSORIES & CAPS (CONT'D.)
CAPS FOR PRINTED CIRCUIT BOARD PROCESSING
Available on models with plain bushing.
Supplied mounted on switches or separately.
Provides additional protection during pcb processing.
Series Material Part No.
S Vinyl U3012
TP Vinyl U3502
Outline
(.629)
(.629)
(.187 DIA)
(.187 DIA)
16.00
16.00
4.76 DIA
4.76 DIA
(.687)
(.687)
(.155 DIA)
(.155 DIA)
17.45
17.45
3.96 DIA
3.96 DIA
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
D
D7
APEM
, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com
SECURITY GUARDS for switch series 12000, 3500, 600H and 6000
Series 20 - for 2 position switches
Actuator returned then locked in down position (OFF)
Series 40 - for 2 position switches
Actuator returned then locked in upper position
MODEL NO. COLOR
22 Gray
23 White
24 Orange
25 Black
26 Red
27 Green
28 Yellow
25/28 Black/yellow striped
● Security guards prevent inadvertent switch operation.
● When guard cap is raised, switch actuator operates freely.
● When guard cap is depressed, switch actuator is locked
in set position.
● Designed for use on switches with 11.9mm (.468") or
12mm (.472") dia. threaded bushings and actuator length
17.5mm (.688") outside bushing .
● Adjust guard for correct switch operation with 2 nuts.
MATERIALS Support plate: Matte black steel
Cap: Thermoset plastic
Series 30 - for 3 position switches
Actuator returned then locked in upper position
MODEL NO. COLOR
32 Gray
33 White
34 Orange
35 Black
36 Red
37 Green
38 Yellow
39 Yellow
35/38 Black/yellow striped
MODEL NO. COLOR
42 Gray
43 White
44 Orange
45 Black
46 Red
47 Green
48 Yellow
49 Blue
45/48 Black/yellow striped
FEATURES
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
D
D8
APEM
, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com
SECURITY GUARDS for switch series 12000, 3500, 600H and 6000
Series 60 - for 3 position switches
Actuator returned then locked in upper position
Series 20PN - for 2 position switches
Actuator returned then locked in down position (OFF)
Option P - holes for wiring seal standard on this model
MODEL NO. COLOR
62 Gray
63 White
64 Orange
65 Black
66 Red
67 Green
68 Yellow
69 Blue
65/68 Black/yellow striped
Series 70 - for 2 position switches
Actuator returned then locked in upper position
MODEL NO. COLOR
72 Gray
73 White
74 Orange
75 Black
76 Red
77 Green
78 Yellow
79 Yellow
75/78 Black/yellow striped
MODEL NO. COLOR
22PN Gray
23PN White
24PN Orange
25PN Black
26PN Red
27PN Green
28PN Yellow
29PN Blue
Series 50 - for 2 position switches
Actuator returned then locked in down position (OFF)
MODEL NO. COLOR
52 Gray
53 White
54 Orange
55 Black
56 Red
57 Green
58 Yellow
59 Blue
55/58 Black/yellow striped
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
D
D9
APEM
, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com
SECURITY GUARDS for switch series 12000, 3500, 600H and 6000
With keying With locking ring With 'D' flat
PANEL CUT-OUTS & OPTIONS
P Holes for wiring seal
Cap engraving available - consult factory.
Other locking configurations such as locked center position available - consult factory.
Series 20 - 30 - 40 Series 50 - 60 - 70
SECURITY GUARDS for switch series 3500, 600H and 6000
Series 90 Bushing shapes - for standard products
Actuator locked in center position
- for other products
ABCD
EFGH
Security guard cap colors Color of stripes How to order
Locks in center Prevents down Prevents up Locks in down Locks in up
position position position position position
1 5
4
3
2
OPTION COLOR
1Blue
2Black
3Green
4Gray
5Yellow
6Red
7/1 White
9Orange
0Striped (see
color of stripes)
Security guard cap shape
OPTION STRIPE 1 STRIPE 2
ARed Black
BYellow Black
CRed White
DWhite Black
Series Bushing shape Cap shape Cap color Color of stripes
Example of completely specified
model number:
90A10B
9 0
Fill in boxes by making selections from each category
indicated.
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
D
D10
APEM
, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com
SEALING BOOTS FOR SWITCHES
For toggle bushing 6 x 0.75 (.236 x 0.75) - 5500 series
FEATURES
● Prevents dust, sand and water from entering switches.
● Prevents ice from blocking actuator movement on toggle switches.
● Compatible with internally sealed toggle and pushbutton actuators.
● Available in a wide range of colors .
● Each boot is supplied with a sealing ring or washer.
MATERIALS AND SPECIFICATIONS
Boot material: Neoprene or silicone (see comparative advantages below)
Nut material: Nickel plated or matte black finished brass
Operating temperature: Neoprene; -20°C to 50°C -40°C to 85°C
Comparative Temperature Range Elasticity Mechanical
Advantages Low High Resistance
Silicone Excellent Excellent Excellent Poor
Neoprene Poor Good Poor Excellent
TYPES OF BOOTS - CROSS SECTIONS * Color options available
NUT FULL TOGGLE SILICONE BOOTS
Black Red Green White
Knurled
Nickel plated U1341 U1341-6 U1341-3 U1341-7
Knurled
Matte black U1343 U1343-6 U1343-3 U1343-7
Hex
Nickel plated U1302 U1302-6 U1302-3 U1302-7
Hex
Matte black U1304 U1304-6 U1304-3 U1304-7
Full toggle* Half toggle* Two part* (no metal For double sealing
(standard) parts accessible)
EXAMPLES OF MOUNTING
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
D
D11
APEM
, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com
SEALING BOOTS FOR SWITCHES
For toggle bushing 6,35-40NS (1/4-40NS) - 5000 and 11000 series
For toggle bushing 11,9-32 (15/32-32NS) - 12000, 3500 and 6000 series
For toggle bushing 10 x 0.75 (.393 x 0.75) - 10600 series
For toggle bushing 6,35-40NS (1/4-40NS) - 5000 and 11000 series
NUT FULL TOGGLE SILICONE BOOTS
Black Red Green White
Knurled
Nickel plated U1331 U1331-6 U1331-3 U1331-7
Knurled
Matte black U1333 U1333-6 U1333-3 U1333-7
Hex
Nickel plated U1229 U1229-6 U1229-3 U1229-7
Hex
Matte black U1231 U1231-6 U1231-3 U1231-7
NUT SILICONE BOOTS (supplied as 2 separate parts)
Black Red Green White
U5149 U5149-6 U5149-3 U5149-7
When boot is mounted onto panel, metal parts of switch are
completely covered by insulation.
KNURLED FULL TOGGLE SILICONE BOOTS
NUT Black Red Green White
Nickel plated U1612 U1612-6 U1612-3 U1612-7
Matte black U1614 U1614-6 U1614-3 U1614-7
HEX NUT FULL TOGGLE SILICONE BOOTS
Black Red Green White
Nickel plated U1031 U1031-6 U1031-3 U1031-7
Matte black U1024 U1024-6 U1024-3 U1024-7
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
D
D12
APEM
, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com
SEALING BOOTS FOR SWITCHES
For toggle bushing 12 X 0.75 SI (.472 X 0.75 IS) - 4450, 4650 and 1600 series
For toggle bushing 12 x 0.75 SI (.472 x 0.75 IS) - 400, 500, 600H, 6-600H, 660, 1000 and 3600 series
For toggle bushing 12 x 0.75 SI (.472 x 0.75 IS) - 400, 500, 600H, 6-600H, 600SH, 660, 1000, 1500 and 3600
series
For toggle bushing 11,9-32NS (15/32-32NS) - 12000, 3500 and 6000 series
HEX NUT HALF TOGGLE SILICONE BOOTS
Black Red Green White
Nickel plated U1600 U1600-6 U1600-3 U1600-7
Matte black U1602 U1602-6 U1602-3 U1602-7
HEX NUT FULL TOGGLE BLACK
NEOPRENE BOOTS
Nickel plated U09
Matte black U223
HEX NUT FULL TOGGLE SILICONE BOOTS
Black Red Green White
Nickel plated U1565 U1565-6 U1565-3 U1565-7
Matte black U1567 U1567-6 U1567-3 U1567-7
FULL TOGGLE BLACK
NEOPRENE BOOTS
Nickel plated U851
Matte black U853
HEX NUT HALF TOGGLE SILICONE BOOTS
Black Red Green White
Nickel plated U1151 U1151-6 U1151-3 U1151-7
Matte black U1153 U1153-6 U1153-3 U1153-7
HALF TOGGLE BLACK
NEOPRENE BOOTS
Nickel plated U598
Matte black U600
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
D
D13
APEM
, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com
SEALING BOOTS FOR SWITCHES
For pushbutton bushing 6,35-40NS (1/4-40NS) - 18000, 9000 and 13000 series
For pushbutton bushing 11,9-32NS (15/32-32NS) - 13000X778 and 13000X768 series
For pushbutton bushing 10 x 0.75 (.393 x 0.75) - 10400 series
For pushbutton bushing 4 x 0.70 (.157 x 0.70) - 9500 series
HEX NUT PUSHBUTTON SILICONE BOOTS
Black Red Green White
Nickel plated U1829 U1829-6 U1829-3 U1829-7
Matte black U1831 U1831-6 U1831-3 U1831-7
KNURLED PUSHBUTTON SILICONE BOOTS
NUT Black Red Green White
Nickel plated U1624 U1624-6 U1624-3 U1624-7
Matte black U1626 U1626-6 U1626-3 U1626-7
HEX NUT PUSHBUTTON SILICONE BOOTS
Black Red Green White
Nickel plated U589 U589-6 U589-3 U589-7
Matte black U590 U590-6 U590-3 U590-7
NUT PUSHBUTTON SILICONE BOOTS
Black Red Green White
Knurled
Nickel plated U1401 U1401-6 U1401-3 U1401-7
Knurled
Matte black U1403 U1403-6 U1403-3 U1403-7
Hex
Nickel plated U1318 U1318-6 U1318-3 U1318-7
Hex
Matte black U1320 U1320-6 U1320-3 U1320-7
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
D
D14
APEM
, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com
SEALING BOOTS FOR SWITCHES
For double sealing IP series
For 2600 series rocker switches
For external sealing on A02 series
For pushbutton bushing 12 x 0.75 SI (.472 x 0.75) - 1200, 4700 and 4800 series
TRANSPARENT SILICONE BOOT
U5125
HEX NUT PUSHBUTTON SILICONE BOOTS
Black Red Green White
Nickel plated U1654 U1654-6 U1654-3 U1654-7
Matte black U1656 U1656-6 U1656-3 U1656-7
PUSHBUTTON BLACK
NEOPRENE BOOTS
Nickel plated U31
Matte black U225
Chrome plated
U224
SILICONE BOOT
A02WPC
TRANSPARENT SILICONE BOOT
U2150
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
D
D15
APEM
, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com
VL SERIES LED INDICATORS
6mm (.236") diameter - unsealed
8mm (.314") diameter - unsealed
LED BRIGHT MATTE BLACK
COLOR FINISH FINISH
Red VL1000P600 VL100GP600
Yellow VL1000P500 VL100GP500
Green VL1000P300 VL100GP300
Note: Bright finish is standard.
FEATURES
SPECIFICATIONS
Insulation resistance: 1000 megohms min.
Dielectric strength: 250 Vrms, 50 Hz min.
Electric life at high temperature: 72 hours at 85°C
Torque: 1.25 Nm (.922 ft.lb.) max.applied to nut
Climatic category: 40/085/21
Protection level (sealed models): IP67 per IEC 529
In accordance with NFC 93680 standard
● Indicators with red, yellow or green built-in LED.
● Flatted bushing for anti-rotation.
● 2 bushing diameters: 6mm (.236") and 8mm (.314").
● Sealed and unsealed models.
● Bright chrome or matte black plated finishes.
LED SPECIFICATIONS
(T ambient = 25°C)
Forward voltage: 2VDC (≤2.6V)
Nominal current: 10mA
Max. surge current: 0.5 A (tp<10µs)
Max. reversed voltage: 25V
Max. forward current: 40mA
Max. power dissipation: 100mW
MATERIALS
Bushing and collar: Brass, bright or matte
black chrome plated
Lens: Polycarbonate
Hardware supplied: 1 nickel plated brass
hex nut; 9mm (.354") across flats for 6mm (.236")
dia. indicator or 10mm (.393") across flats for 8mm
(.314") dia. indicator.
LED BRIGHT MATTE BLACK
COLOR FINISH FINISH
Red VL3000P600 VL300GP600
Yellow VL3000P500 VL300GP500
Green VL3000P300 VL300GP300
Note: Bright finish is standard.
(.098)(.098) (.295)(.295) (.051 MAX)(.051 MAX)
(.100)(.100)
(.216)(.216)
(.354 DIA)(.354 DIA)
(.153 DIA)(.153 DIA)
(.019)(.019)
(.019)(.019)
(.236 DIA x 0.75 IS)(.236 DIA x 0.75 IS)
(+)(+)
(-)
5.505.50
0.500.50
9.00 DIA9.00 DIA
3.90 DIA3.90 DIA
2.542.54
0.500.50
6.00 DIA x 0.75 SI6.00 DIA x 0.75 SI
7.507.502.502.50 1.30 Maxi1.30 Maxi
(.100)(.100)
(.433 DIA)(.433 DIA)
(.433)(.433)(.118)(.118) (.062 MAX)(.062 MAX)
(.232 DIA)(.232 DIA)
(.314 DIA x 0.75 IS)(.314 DIA x 0.75 IS)
(.019)(.019)
(.019)(.019)
(.295)(.295)
(+)(+)
(-)(-)
0.500.50
8.00 DIA x 0.75 SI8.00 DIA x 0.75 SI
1.60 Maxi1.60 Maxi11.0011.003.003.00
7.507.50
0.500.50
11.00 DIA11.00 DIA
5.90 DIA5.90 DIA
2.542.54
Arrow indicates bushing flat. Option:
bushing without flat and lockwasher- on
request
Arrow indicates bushing flat. Option:
bushing without flat and lockwasher- on
request
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
D
D16
APEM
, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com
VL SERIES LED INDICATORS
6mm (.236") diameter - sealed
8mm (.314") diameter - sealed
LED BRIGHT MATTE BLACK
COLOR FINISH FINISH
Red VL1CK0P600 VL1CKGP600
Yellow VL1CK0P500 VL1CKGP500
Green VL1CK0P300 VL1CKGP300
Notes: Bright finish is standard. Lens cap is the
same color as the LED.
LED BRIGHT MATTE BLACK
COLOR FINISH FINISH
Red VL3CK0P600 VL3CKGP600
Yellow VL3CK0P500 VL3CKGP500
Green VL3CK0P300 VL3CKGP300
Note: Bright finish is standard. Lens cap is the
same color as the LED.
LED'S
STANDARD HARDWARE AND PANEL CUT-OUTS
5.50
(.216)
0.50
(.019)
0.50
0.50
(.019)
(.019)
3.90 DIA
(+)
(+)
(.153 DIA)
2.54
(-)
(.100)
1.30 Maxi
1.30 Maxi
(.051 MAX)
(.051 MAX)
(.224)
(.224)
(.220)
(.216 DIA)
(.354 DIA)
9.00 DIA
5.50 DIA
5.60
5.60
5.70
5.70
O-RING
O-RING
6.00 DIA x 0.75 SI
6.00 DIA x 0.75 SI
(.236 DIA x 0.75 IS)
(.236 DIA x 0.75 IS)
0.50
(.019)
0.500.50
(.019)(.019)
7.507.50
(.295)(.295)
2.542.54
(-)
(+)
(.100)(.100)
1.60 Maxi
(.062 MAX)
5.90 DIA5.90 DIA
(.232 DIA)(.232 DIA)
8.00 DIA x 0.75 SI
(.314 DIA x 0.75 IS)
(.374 DIA)(.374 DIA)
(.500 DIA)(.500 DIA)
(.354) (.275)
O-RING
9.00 7.00
12.70 DIA12.70 DIA
9.50 DIA9.50 DIA
(.244 DIA)
(.244 DIA)
(.098)
(.098)
2.50
2.50
6.20 DIA
6.20 DIA
(.322 DIA)
(.137)
8.20 DIA
3.50
(.100)
(.100)
(.141)
(.141)
(.181)
(.181)
(.232)
(.232)
(.110 DIA)
(.110 DIA)
(.127 DIA)
(.127 DIA)
Cathode
Cathode
3.60
3.60
4.60
4.60
5.90
5.90
3.25 DIA
3.25 DIA
2.54
2.54
2.80 DIA
2.80 DIA
(1.043)
(1.043)
26.50
26.50
TYPE
TYPE
(.100)
(.100)
(.338)
(.448)
(.301)
(.194 DIA)
(.194 DIA)
(.224 DIA)
Cathode
5.70 DIA
11.40
7.65
8.60
2.54
2.54
4.95 DIA
4.95 DIA
(.913)
23.20 TYPE
(.354) (.078)
(.236 DIA x 0.75 IS)
6.00 DIA x 0.75 SI
9.00 2.00
(.118)(.118) (.393)(.393)
10.0010.003.003.00
8.00 DIA x 0.75 SI8.00 DIA x 0.75 SI
(.314 DIA x 0.75 IS)(.314 DIA x 0.75 IS)
For 6mm (.236") indicators For 8mm (.314") indicators
For 6mm (.236") indicators For 8mm (.314") indicators
Observe polarity of DC supply to
LED's. Longer lead is anode (+).
Shorter lead is cathode (-) on flat
side of bushing (see drawing).
LED's are not removable.
LED's per customer specifications
that meet drawings shown can be
supplied - consult factory.
Arrow indicates bushing flat. Option:
bushing without flat and lockwasher- on
request
Arrow indicates bushing flat. Option:
bushing without flat and lockwasher- on
request
