ASMT-Jx1x 1W Mini Power LED Light Source Data Sheet Description Features This 1W Mini Power LED Light Source is a high performance energy efficient device which can handle high thermal and high driving current. Option with electrically isolated metal slug is also available. Available in Red, Red Orange, Amber, Blue, Royal Blue, Cyan, Green, Cool White, Neutral White and Warm White color Small footprint Energy efficient Direct heat transfer from metal slug to mother board Compatible with reflow soldering process High current operation Long operation life Wide viewing angle Silicone encapsulation Non-ESD sensitive (threshold > 16kV) MSL 1 products The White Mini Power LED is available in the range of color temperature from 2700K to 10000K. The low profile package design and ultra small footprint is suitable for a wide variety of applications especially where space and height is a constraint. The package is compatible with reflow soldering process. To facilitate easy pick & place assembly, the LEDs are packed in EIA-compliant tape and reel. Applications Architectural lighting Garden lighting Decorative lighting Sign backlight Safety, exit and emergency sign lightings Specialty lighting such as task lighting and reading lights Retail display Commercial lighting Accent or marker lightings, strip or step lightings Portable lightings, bicycle head lamp, torch lights. Pathway lighting Street lighting Tunnel lighting CAUTION: Customer is advised to keep the LEDs in the MBB when not in use as prolonged exposure to environment might cause the silver plated leads to tarnish, which might cause difficulties in soldering. Package Dimensions 5.0 4.0 O 3.7 4.0 0.7 1.0 0.8 Lens Cathode Mark 0.3 1.85 Anode Lead NC NC NC Body Metal Slug NC Cathode Lead 0.65 0.60 O 1.70 Figure 1. ASMT-Jx1x package outline drawing Notes: 1. All dimensions in millimeters. 2. Metal slug is connected to anode for electrically non-isolated option. 3. Tolerance is 0.1 mm unless otherwise specified. 4. Terminal finish: Ag plating. 5. Corresponding NC (No Connection) leads adjacent to anode and cathode leads can be electrically short. 2 Part Numbering System ASMT - J x 11 x 2 - x 3 x 4 x 5 x 6 x 7 Packaging Option Color Bin Selection Maximum Flux Bin Selection Minimum Flux Bin Selection Dice Type N - InGaN A - AlInGaP Heat Sink 0 - Electrically Non-isolated 1 - Electrically Isolated Color R - Red H - Red Orange A - Amber G - Green C - Cyan B - Blue L - Royal Blue W - Cool White N - Neutral White Y - Warm White Note: 1. Please refer to Page 9 for selection details. Device Selection Guide (TJ = 25C) Luminous Flux (lm) / Radiometric Power (mW), V [1,2] Part Number Color Min. Typ. Max. Test Current (mA) ASMT-JR10-ARS01 Red 39.8 48.0 67.2 350 Dice Technology Electrically Isolated Metal Slug AllnGaP No ASMT-JA10-ARS01 Amber 39.8 48.0 67.2 350 AllnGaP No ASMT-JH10-ARS01 Red Orange 39.8 48.0 67.2 350 AllnGaP No ASMT-JB11-NMP01 Blue 13.9 18.0 30.6 350 InGaN Yes ASMT-JL11-NMP01 Royal Blue 225 mW 350 mW 435 mW 350 InGaN Yes ASMT-JC11-NST01 Cyan 51.7 58 87.4 350 InGaN Yes ASMT-JG11-NST01 Green 51.7 70.0 87.4 350 InGaN Yes ASMT-JW11-NTV01 Cool White 67.2 90.0 113.6 350 InGaN Yes ASMT-JN11-NTV01 Neutral White 67.2 90.0 113.6 350 InGaN Yes ASMT-JY11-NSU01 Warm White 51.7 78.0 99.6 350 InGaN Yes Notes: 1. V is the total luminous flux / radiometric power output as measured with an integrating sphere at 25ms mono pulse condition. 2. Flux tolerance is 10% 3 Absolute Maximum Ratings Parameter AllnGaP InGaN InGaN Cyan Units 500 500 mA 1000 1000 mA 1980 mW DC Forward Current [1] 500 Peak Pulsing Current [2] 1000 Power Dissipation 1230 1830 LED Junction Temperature 125 150 150 C Operating Metal Slug Temperature Range at 350 mA -40 to +115 -40 to +135 -40 to +135 C Storage Temperature Range -40 to +120 -40 to +120 -40 to +120 C Soldering Temperature Refer to Figure 26 Reverse Voltage [3] Not recommended Notes: 1. Derate linearly based on Figure 10 for AlInGaP and Figure 22 for InGaN. 2. Pulse condition duty factor = 10%, Frequency = 1 kHz. 3. Not designed for reverse bias operation Optical Characteristics at 350 mA (TJ = 25 C) Peak Wavelength, PEAK (nm) Dominant Wavelength, D [1] (nm) Viewing Angle, 21/2 [2] () Luminous Efficiency (lm/W) Color Typ. Typ. Typ. Typ. ASMT-JR10-ARS01 Red 635 625 165 65 ASMT-JA10-ARS01 Amber 598 590 165 65 ASMT-JH10-ARS01 Red Orange 625 615 165 65 ASMT-JG11-NST01 Green 519 525 165 63 ASMT-JC11-NST01 Cyan 497 500 165 49 ASMT-JB11-NMP01 Blue 454 460 165 16 ASMT-JL11-NMP01 Royal Blue 450 455 165 Not applicable Correlated Color Temperature, CCT (Kelvin) Viewing Angle, 21/2 [2] () Luminous Efficiency (lm/W) Part Number Part Number Color Min. Max. Typ. Typ. ASMT-JW11-NTV01 Cool White 4500 10000 140 80 ASMT-JN11-NTV01 Neutral White 3500 4500 140 80 ASMT-JY11-NSU01 Warm White 2700 3500 140 70 Notes: 1. The dominant wavelength, D, is derived from the CIE Chromaticity Diagram and represents the color of the device. 2. 1/2 is the off-axis angle where the luminous intensity is 1/2 the peak intensity. Electrical Characteristic at 350 mA (TJ = 25C) Forward Voltage, VF (Volts) Thermal Resistance, Rj-ms(C/W) [1] Dice Type Min. Typ Max. Typ. AllnGaP 1.7 2.1 2.3 9 InGaN (non-Cyan colors) 2.8 3.2 3.5 9 InGaN Cyan 3.0 3.4 3.8 9 Note: 1. Rj-ms is Thermal Resistance from LED junction to metal slug. 4 1 0.9 AMBER 0.8 RED ORANGE 0.7 RED 0.6 0.5 0.4 0.3 0.2 0.1 0 530 545 560 575 590 605 620 635 650 665 680 WAVELENGTH - nm 500 450 400 350 300 250 200 150 100 50 0 1.4 0 0.5 1 1.5 2 FORWARD VOLTAGE - V 2.5 0.6 0.4 100 200 300 400 DC FORWARD CURRENT - mA 500 Figure 3. Relative Luminous Flux vs. Mono Pulse Current 1 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 -90 -60 -30 0 30 60 ANGULAR DISPLACEMENT - DEGREES 90 Figure 5. Radiation Pattern for Red, Red Orange and Amber 1.4 1.2 1.2 D= 0.05 0.10 0.25 0.50 1.00 1.0 0.8 PULSE CURRENT, IP - A PULSE CURRENT, IP - A 0.8 0 1.4 0.6 0.4 1.0 D= 0.05 0.10 0.25 0.50 1.00 0.8 0.6 0.4 0.2 0.2 0.0 0.00001 0.0001 0.001 0.01 0.1 1 PULSE DURATION, tp - sec Figure 6. Maximum pulse current vs. ambient temperature. Derated based on TA = 25C, RJ-A = 50C/W. 5 1 0 3 Figure 4. Forward Current vs. Forward Voltage 1.2 0.2 NORMALIZED INTENSITY FORWARD CURRENT - mA Figure 2. Relative Intensity vs. Wavelength for Red, Red-Orange and Amber 1.6 RELATIVE LUMINOUS FLUX (NORMALIZED AT 350 mA) RELATIVE INTENSITY AlInGaP 10 100 0.0 0.00001 0.0001 0.001 0.01 0.1 1 PULSE DURATION, tp - sec Figure 7. Maximum pulse current vs. ambient temperature. Derated based on TA = 85C, RJ-A = 50C/W. 10 100 0.40 240.0 220.0 200.0 180.0 160.0 140.0 120.0 100.0 80.0 60.0 40.0 20.0 0.0 FORWARD VOLTAGE SHIFT - V (NORMALIZED AT 25C) RELATIVE LIGHT OUTPUT - % (NORMALIZED AT 25C) AlInGaP RED RED-ORANGE AMBER -50 -25 0 25 50 75 JUNCTION TEMPERATURE, TJ -C 0.00 -0.10 -0.20 -50 -25 0 25 50 75 JUNCTION TEMPERATURE, TJ -C 100 125 120 140 Figure 9. Forward Voltage Shift vs. Junction Temperature 600 MAX ALLOWABLE DC CURRENT - mA MAX ALLOWABLE DC CURRENT - mA 0.10 125 600 500 400 300 RJ-A = 30C/W RJ-A = 40C/W RJ-A = 50C/W 200 100 500 400 20 40 60 80 100 AMBIENT TEMPERATURE, T A - C 120 140 RJ-MS = 9C/W 300 200 100 0 0 Figure 10. Maximum Forward Current vs. Ambient Temperature. Derated based on TJMAX = 125C, RJ-A = 30C/W, 40C/W and 50C/W 6 RED RED ORANGE AMBER 0.20 -0.30 100 Figure 8. Relative Light Output vs. Junction Temperature 0 0.30 0 20 40 60 80 100 METAL SLUG TEMPERATURE, T MS - C Figure 11. Maximum Forward Current vs. Ambient Slug Temperature. Derated based on TJMAX = 125C, RJ-MS = 9C/W 1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0.0 380 WARM WHITE COOL WHITE 430 480 530 580 630 WAVELENGTH - nm 680 730 RELATIVE INTENSITY RELATIVE INTENSITY InGaN 780 Figure 12. Relative Intensity vs. Wavelength for Cool and Warm White Figure 13. Relative Intensity vs. Wavelength for Blue, Royal Blue, Cyan and Green 1.4 FORWARD CURRENT - mA RELATIVE LUMINOUS FLUX (NORMALIZED AT 350 mA) 1.2 1 0.8 0.6 0.4 0.2 0 0 100 200 300 400 DC FORWARD CURRENT - mA 500 -30 0 30 60 ANGULAR DISPLACEMENT - DEGREES Figure 16. Radiation Pattern for Blue, Royal Blue, Cyan and Green 7 GREEN WHITE BLUE ROYAL BLUE CYAN 0.5 1 1.5 2 2.5 FORWARD VOLTAGE - V 3 3.5 4 Figure 15. Forward Current vs. Forward Voltage BLUE ROYAL BLUE GREEN CYAN -60 500 450 400 350 300 250 200 150 100 50 0 0 NORMALIZED INTENSITY NORMALIZED INTENSITY Figure 14. Relative Luminous Flux vs. Mono Pulse Current 1 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 -90 1 0.9 GREEN 0.8 CYAN 0.7 BLUE 0.6 ROYAL BLUE 0.5 0.4 0.3 0.2 0.1 0 380 405 430 455 480 505 530 555 580 605 630 WAVELENGTH - nm 90 1 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 -90 -60 -30 0 30 60 ANGULAR DISPLACEMENT - DEGREES 90 Figure 17. Radiation Pattern for Cool White, Neutral White and Warm White 1.4 D= 0.05 0.10 0.25 0.50 1.00 1.0 0.8 0.6 D= tp T IF T 1.2 PULSE CURRENT, IP-A PULSE CURRENT, IP-A 1.2 1.4 tp 0.4 0.2 D= 0.05 0.10 0.25 0.50 1.00 1.0 0.8 D= tp tp T IF T 0.6 0.4 0.2 0.0 0.00001 0.0001 0.001 0.01 0.1 1 10 100 0.0 0.00001 0.0001 0.001 0.01 0.1 PULSE DURATION, tp - sec PULSE DURATION, tp - sec Figure 18. Maximum pulse current vs. ambient temperature. Derated based on TA = 25C, RJ-A = 50C/W. 1 10 100 Figure 19. Maximum pulse current vs. ambient temperature. Derated based on TA = 85C, RJ-A = 50C/W. InGaN BLUE CYAN ROYAL BLUE GREEN WHITE -25 0 25 50 75 100 JUNCTION TEMPERATURE,TJ - C 0.30 0.25 0.20 0.15 0.10 0.05 0.00 -0.05 -0.10 -0.15 -0.20 -0.25 -0.30 -0.35 -0.40 -0.45 -50 FORWARD VOLTAGE SHIFT - V (NORMALIZED AT 25C) RELATIVE LIGHT OUTPUT - % (NORMALIZED AT 25C) 120.0 110.0 100.0 90.0 80.0 70.0 60.0 50.0 40.0 30.0 20.0 10.0 0.0 -50 125 150 Figure 20. Relative Light Output vs. Junction Temperature MAX ALLOWABLE DC CURRENT - mA MAX ALLOWABLE DC CURRENT - mA 0 25 50 75 100 JUNCTION TEMPERATURE,TJ - C 125 150 600 500 400 300 RJ-A = 30C/W RJ-A = 40C/W RJ-A = 50C/W 200 100 0 20 40 60 80 100 120 AMBIENT TEMPERATURE, T A - C 140 160 Figure 22. Maximum Forward Current vs. Ambient Temperature. Derated based on TJMAX = 150C, RJ-A = 30C/W, 40C/W and 50C/W 8 -25 Figure 21. Forward Voltage Shift vs. Junction Temperature 600 0 ROYAL BLUE BLUE WHITE GREEN CYAN 500 400 RJ-MS = 9C/W 300 200 100 0 0 20 40 60 80 100 120 METAL SLUG TEMPERATURE, T MS - C 140 160 Figure 23. Maximum Forward Current vs. Metal Slug Temperature. Derated based on TJMAX = 150C, RJ-MS = 9C/W. 0.80 0.85 Solder Pad o1.90 1.75 3.50 5.20 Slug Indepdent 3.2 1.32 Solder Pad Figure 25. Recommended pick and place nozzle tip. Inner diameter = 3.2 mm. Figure 24. Recommended soldering land pattern TEMPERATURE 10 - 30 SEC. 217C 200C 255 - 260C 3C/SEC. MAX. 6C/SEC. MAX. 150C 3C/SEC. MAX. 100 SEC. MAX. 60 - 120 SEC. TIME (Acc. to J-STD-020C) Figure 26. Recommended Reflow Soldering Profile Note: For detail information on reflow soldering of Avago surface mount LEDs, do refer to Avago Application Note AN 1060 Surface Mounting SMT LED Indicator Components. 9 Option Selection Details Flux / Power Bin Limit [x4, x5] ASMT-J x1 1 x2 - x3 x4 x5 x6 x7 x4 - Minimum Flux Bin Selection x5 - Maximum Flux Bin Selection x6 - Color Bin Selection x7 - Packaging Option Luminous Flux (lm) / Radiometric Power (mW) at 350 mA Color Bin ID Min. Max. Blue M 13.9 18.1 N 18.1 23.5 P 23.5 30.6 R 39.8 51.7 S 51.7 67.2 T 67.2 87.4 U 87.4 99.6 V 99.6 113.6 Other Colors Royal Blue M 225.0 275.0 N 275.0 355.0 P 355.0 435.0 Tolerance for each bin limits is 10% Color Bin Selection [x4] Individual reel will contain parts from one color bin selection only. Cool White Selection Warm White Bin ID Selection Bin ID 0 Full Distribution 0 Full Distribution E VM, UM, VN and UN E NM, MM, N1 and M1 F WM, VM, WN and VN F PM, NM, P1 and N1 G XM, WM, XN and WN G QM, PM, Q1 and P1 H UN, VN, U0 and V0 H M1, N1, M0 and N0 J WN, VN, W0 and V0 J P1, N1, P0 and N0 K XN, WN, X0 and W0 K Q1, P1, Q0 and P0 L N0, M0, NA and MA M P0, N0, PA and NA N Q0, P0, QA and PA L V0, U0, VP and UP M W0, V0, WP, VP and WQ N X0, W0, XP, WP and WQ P Y0 Q YA Neutral White Selection Bin ID 0 Full Distribution E SM, RM, S1 and R1 F TM, SM, TN and S1 G S1, R1, S0 and R0 H TN, S1, T0 and S0 J S0, R0, SA and RA K T0, S0, TP and SA 10 Others Colors Selection Bin ID 0 Full Distribution Z A and B Y B and C W C and D V D and E Q A, B and C P B, C and D N C, D and E M D, E and F 0.48 0.42 4500K 0.40 UM 5650K 0.36 WM XM WN W0 XN X0 WP 7000K 0.34 10000K 0.30 BLACK BODY CURVE 0.28 0.30 0.32 0.34 X-COORDINATE 0.36 0.38 0.40 0.44 3500K 3800K Y-COORDINATE 0.42 4100K 4500K RM SM TM S1 S0 TN T0 SA 0.36 R1 R0 RA BLACK BODY CURVE TP 0.34 0.32 0.34 0.36 0.38 0.40 X-COORDINATE Figure 29. Color bin structure for Neutral White 11 0.40 0.38 QA PA NM P1 P0 N0 NA M1 N1 M0 MA BLACK BODY CURVE 0.32 0.38 0.40 0.42 0.44 0.46 X-COORDINATE Figure 28. Color bin structure for Warm White 0.46 0.38 Q1 Q0 MM PM QM 0.42 2700K 3050K 2850K 0.34 Figure 27. Color bin Structure for Cool White 0.40 3500K 3250K 0.36 YA 0.28 0.26 0.26 UP VP XP WQ Y0 0.44 UN U0 VM VN V0 6300K Y-COORDINATE Y-COORDINATE 0.38 0.32 0.46 5000K 0.42 0.44 0.48 0.50 Color Bin Limits Warm White Color Limits (Chromaticity Coordinates) 0.367 0.400 Bin MM x y 0.471 0.451 0.460 0.430 0.473 0.432 0.486 0.455 0.346 0.359 0.347 0.372 Bin M1 x y 0.460 0.430 0.453 0.416 0.467 0.419 0.473 0.432 0.360 0.357 0.344 0.344 0.346 0.359 Bin M0 x y 0.453 0.416 0.444 0.399 0.459 0.403 0.467 0.419 0.360 0.357 0.357 0.342 0.343 0.331 0.344 0.344 Bin MA x y 0.459 0.403 0.444 0.399 0.436 0.384 0.451 0.389 x y 0.329 0.357 0.329 0.369 0.348 0.385 0.347 0.372 Bin NM x y 0.454 0.446 0.444 0.426 0.460 0.430 0.471 0.451 Bin VN x y 0.329 0.345 0.329 0.357 0.347 0.372 0.346 0.359 Bin N1 x y 0.444 0.426 0.438 0.412 0.453 0.416 0.460 0.430 Bin V0 x y 0.329 0.331 0.329 0.345 0.346 0.359 0.344 0.344 Bin N0 x y 0.438 0.412 0.429 0.394 0.444 0.399 0.453 0.416 Bin VP x y 0.329 0.331 0.344 0.344 0.343 0.331 0.329 0.320 Bin NA x y 0.444 0.399 0.429 0.394 0.422 0.379 0.436 0.384 Bin WM x y 0.329 0.369 0.329 0.357 0.315 0.344 0.314 0.355 Bin PM x y 0.438 0.440 0.430 0.421 0.444 0.426 0.454 0.446 Bin WN x y 0.329 0.345 0.316 0.333 0.315 0.344 0.329 0.357 Bin P1 x y 0.430 0.421 0.424 0.407 0.438 0.412 0.444 0.426 Bin W0 x y 0.329 0.345 0.329 0.331 0.317 0.320 0.316 0.333 Bin P0 x y 0.424 0.407 0.416 0.389 0.429 0.394 0.438 0.412 Bin WP x y 0.329 0.331 0.329 0.320 0.318 0.310 0.317 0.320 Bin PA x y 0.429 0.394 0.416 0.389 0.410 0.374 0.422 0.379 Bin WQ x y 0.329 0.320 0.329 0.310 0.319 0.300 0.318 0.310 Bin QM x y 0.421 0.433 0.414 0.414 0.430 0.421 0.438 0.440 Bin XM x y 0.301 0.314 0.355 0.303 0.333 Bin Q1 0.342 0.315 0.344 x y 0.414 0.414 0.409 0.400 0.424 0.407 0.430 0.421 Bin XN x y 0.305 0.322 0.303 0.333 0.315 0.344 0.316 0.333 Bin Q0 x y 0.409 0.400 0.402 0.382 0.416 0.389 0.424 0.407 Bin X0 x y 0.308 0.311 0.305 0.322 0.316 0.333 0.317 0.320 Bin QA x y 0.416 0.389 0.402 0.382 0.396 0.367 0.410 0.374 Bin XP x y 0.308 0.311 0.317 0.320 0.319 0.300 0.311 0.293 Bin YO x y 0.308 0.311 0.283 0.284 0.274 0.301 0.303 0.333 Bin YA x y 0.308 0.311 0.311 0.293 0.290 0.270 0.283 0.284 Cool White Color Limits (Chromaticity Coordinates) Bin UM x y 0.365 0.386 0.348 0.385 0.347 0.372 Bin UN x y 0.365 0.386 0.362 0.372 Bin U0 x y 0.362 0.372 Bin UP x y Bin VM Tolerance: 0.01 12 Tolerance: 0.01 Neutral White Color Limits (Chromaticity Coordinates) Bin RM x y 0.421 0.433 0.414 0.414 0.397 0.406 0.402 0.423 Bin R1 x y 0.414 0.414 0.409 0.400 0.392 0.391 0.397 0.406 Bin R0 Dominant Wavelength (nm) at 350 mA x y 0.392 0.391 0.387 0.374 0.402 0.382 0.409 0.400 x y 0.387 0.374 0.383 0.360 0.396 0.367 0.402 0.382 Bin SM x y 0.402 0.423 0.397 0.406 0.382 0.397 0.386 0.413 Bin S1 x y 0.397 0.406 0.392 0.391 0.378 0.382 0.382 0.397 Bin S0 x y 0.392 0.391 0.387 0.374 0.374 0.366 0.378 0.382 x y 0.387 0.374 0.383 0.360 0.370 0.351 Bin TM x y 0.386 0.413 0.382 0.397 Bin TN x y 0.382 0.397 Bin T0 x y Bin TP x y Bin RA Bin SA Color Bin ID Min. Max. Red - 620.0 635.0 Red Orange - 610.0 620.0 Amber B 587.0 589.5 C 589.5 592.0 D 592.0 594.5 E 594.5 597.0 A 455.0 460.0 B 460.0 465.0 C 465.0 470.0 D 470.0 475.0 C 490.0 495.0 0.374 0.366 D 495.0 500.0 E 500.0 505.0 0.365 0.386 0.367 0.400 F 505.0 510.0 0.378 0.382 0.362 0.372 0.365 0.386 G 510.0 515.0 H 515.0 520.0 0.378 0.382 0.374 0.366 0.360 0.357 0.362 0.372 A 515.0 520.0 B 520.0 525.0 0.374 0.366 0.370 0.351 0.357 0.342 0.360 0.357 C 525.0 530.0 D 530.0 535.0 Tolerance: 0.01 Blue Cyan Green Tolerance: 1 nm Peak Wavelength (nm) at 350 mA Packaging Option [x7] Selection Option 1 Tape and Reel Color Royal Blue Tolerance: 2 nm Example ASMT-JY11-NST01 ASMT-JY11-Nxxxx - Warm White, InGaN, Electrically isolated Heat Sink X1 = S - Minimum Flux Bin S - Maximum Flux Bin T X2 = T X3 = 0 - Full Distribution X4 = 1 - Tape and Reel Option 13 Bin ID Min. Max. C 440.0 445.0 D 445.0 450.0 E 450.0 455.0 F 455.0 460.0 Tape and Reel - Option 1 o1.5 0.1 4.00 .10 0.25 0.02 2.00 .05 5 5.50 .05 5.25 .10 12.00 +.30 .10 1.75 0.01 2.01 0.1 8.00 .10 o1.5 0.25 8 0.25 0.02 2.05 .10 4.15 .10 Figure 30. Carrier Tape Dimensions 13.2 .5 16.0 .5 3 0.5 o21.0 0.5 o13.1 0.5 o10 178 1 o60 0.5 4 0.5 5 0.5 Notes: 1. Empty component pockets sealed with top cover tape. 2. 250 or 500 pieces per reel. 3. Drawing not to scale. 4. All dimensions are in millimeters. Figure 31. Reel dimensions 14 USER FEED DIRECTION CATHODE SIDE PRINTED LABEL Figure 32. Reeling Orientation DISCLAIMER: Avago's products and software are not specifically designed, manufactured or authorized for sale as parts, components or assemblies for the planning, construction, maintenance or direct operation of a nuclear facility or for use in medical devices or applications. Customer is solely responsible, and waives all rights to make claims against avago or its suppliers, for all loss, damage, expense or liability in connection with such use. For product information and a complete list of distributors, please go to our web site: www.avagotech.com Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies in the United States and other countries. Data subject to change. Copyright (c) 2005-2011 Avago Technologies. All rights reserved. AV02-1770EN - May 24, 2011