ASMT-Jx1x
1W Mini Power LED Light Source
Data Sheet
Description
This 1W Mini Power LED Light Source is a high perfor-
mance energy e cient device which can handle high
thermal and high driving current. Option with electrically
isolated metal slug is also available.
The White Mini Power LED is available in the range of color
temperature from 2700K to 10000K.
The low pro le package design and ultra small footprint is
suitable for a wide variety of applications especially where
space and height is a constraint.
The package is compatible with re ow soldering process.
To facilitate easy pick & place assembly, the LEDs are
packed in EIA-compliant tape and reel.
Features
Available in Red, Red Orange, Amber, Blue, Royal Blue,
Cyan, Green, Cool White, Neutral White and Warm
White color
 Small footprint
 Energy e cient
 Direct heat transfer from metal slug to mother board
 Compatible with re ow soldering process
 High current operation
 Long operation life
 Wide viewing angle
 Silicone encapsulation
 Non-ESD sensitive (threshold > 16kV)
 MSL 1 products
Applications
 Architectural lighting
 Garden lighting
 Decorative lighting
 Sign backlight
 Safety, exit and emergency sign lightings
 Specialty lighting such as task lighting and reading
lights
 Retail display
 Commercial lighting
 Accent or marker lightings, strip or step lightings
 Portable lightings, bicycle head lamp, torch lights.
 Pathway lighting
 Street lighting
 Tunnel lighting
CAUTION: Customer is advised to keep the LEDs in the MBB when not in use as prolonged exposure to
environment might cause the silver plated leads to tarnish, which might cause di culties in soldering.
2
Package Dimensions
Figure 1. ASMT-Jx1x package outline drawing
Notes:
1. All dimensions in millimeters.
2. Metal slug is connected to anode for electrically non-isolated option.
3. Tolerance is ±0.1 mm unless otherwise speci ed.
4. Terminal  nish: Ag plating.
5. Corresponding NC (No Connection) leads adjacent to anode and cathode leads can be electrically short.
5.0
4.0
4.0
0.7
1.0
0.3
1.85
Ø 3.7
0.8
0.65
0.60
Ø 1.70
Body Cathode Lead
Lens
Cathode Mark
Anode Lead NC
NC
NC
NC
Metal Slug
3
Part Numbering System
Note:
1. Please refer to Page 9 for selection details.
Device Selection Guide (TJ = 25°C)
Part Number Color
Luminous Flux (lm) / Radiometric Power
(mW), ΦV [1,2] Test Current
(mA)
Dice
Technology
Electrically
Isolated
Metal Slug Min. Typ. Max.
ASMT-JR10-ARS01 Red 39.8 48.0 67.2 350 AllnGaP No
ASMT-JA10-ARS01 Amber 39.8 48.0 67.2 350 AllnGaP No
ASMT-JH10-ARS01 Red Orange 39.8 48.0 67.2 350 AllnGaP No
ASMT-JB11-NMP01 Blue 13.9 18.0 30.6 350 InGaN Yes
ASMT-JL11-NMP01 Royal Blue 225 mW 350 mW 435 mW 350 InGaN Yes
ASMT-JC11-NST01 Cyan 51.7 58 87.4 350 InGaN Yes
ASMT-JG11-NST01 Green 51.7 70.0 87.4 350 InGaN Yes
ASMT-JW11-NTV01 Cool White 67.2 90.0 113.6 350 InGaN Yes
ASMT-JN11-NTV01 Neutral White 67.2 90.0 113.6 350 InGaN Yes
ASMT-JY11-NSU01 Warm White 51.7 78.0 99.6 350 InGaN Yes
Notes:
1. ΦV is the total luminous  ux / radiometric power output as measured with an integrating sphere at 25ms mono pulse condition.
2. Flux tolerance is ±10%
ASMT – J x 1 x –x x4x5x6x7
Packaging Option
Color Bin Selection
Maximum Flux Bin Selection
Minimum Flux Bin Selection
Dice Type
N - InGaN
A - AlInGaP
Heat Sink
0 - Electrically Non-isolated
1 - Electrically Isolated
Color
R - Red
H - Red Orange
A - Amber
G - Green
C - Cyan
B - Blue
L - Royal Blue
W - Cool White
N - Neutral White
Y - Warm White
123
4
Absolute Maximum Ratings
Parameter AllnGaP InGaN InGaN Cyan Units
DC Forward Current [1] 500 500 500 mA
Peak Pulsing Current [2] 1000 1000 1000 mA
Power Dissipation 1230 1830 1980 mW
LED Junction Temperature 125 150 150 °C
Operating Metal Slug Temperature Range at 350 mA -40 to +115 -40 to +135 -40 to +135 °C
Storage Temperature Range -40 to +120 -40 to +120 -40 to +120 °C
Soldering Temperature Refer to Figure 26
Reverse Voltage [3] Not recommended
Notes:
1. Derate linearly based on Figure 10 for AlInGaP and Figure 22 for InGaN.
2. Pulse condition duty factor = 10%, Frequency = 1 kHz.
3. Not designed for reverse bias operation
Optical Characteristics at 350 mA (TJ = 25 °C)
Part Number Color
Peak
Wavelength,
PEAK (nm)
Dominant
Wavelength,
D [1] (nm)
Viewing
Angle,
2½ [2] (°)
Luminous
E ciency
(lm/W)
Typ. Typ. Typ. Typ.
ASMT-JR10-ARS01 Red 635 625 165 65
ASMT-JA10-ARS01 Amber 598 590 165 65
ASMT-JH10-ARS01 Red Orange 625 615 165 65
ASMT-JG11-NST01 Green 519 525 165 63
ASMT-JC11-NST01 Cyan 497 500 165 49
ASMT-JB11-NMP01 Blue 454 460 165 16
ASMT-JL11-NMP01 Royal Blue 450 455 165 Not applicable
Part Number Color
Correlated Color Temperature,
CCT (Kelvin)
Viewing Angle,
2½ [2] (°)
Luminous E ciency
(lm/W)
Min. Max. Typ. Typ.
ASMT-JW11-NTV01 Cool White 4500 10000 140 80
ASMT-JN11-NTV01 Neutral White 3500 4500 140 80
ASMT-JY11-NSU01 Warm White 2700 3500 140 70
Notes:
1. The dominant wavelength, D, is derived from the CIE Chromaticity Diagram and represents the color of the device.
2. ½ is the o -axis angle where the luminous intensity is ½ the peak intensity.
Electrical Characteristic at 350 mA (TJ = 25°C)
Dice Type
Forward Voltage, VF (Volts)
Thermal Resistance,
Rj-ms(°C/W) [1]
Min. Typ Max. Typ.
AllnGaP 1.7 2.1 2.3 9
InGaN (non-Cyan colors) 2.8 3.2 3.5 9
InGaN Cyan 3.0 3.4 3.8 9
Note:
1. Rj-ms is Thermal Resistance from LED junction to metal slug.
5
Figure 2. Relative Intensity vs. Wavelength for Red, Red-Orange and Amber Figure 3. Relative Luminous Flux vs. Mono Pulse Current
AlInGaP
Figure 4. Forward Current vs. Forward Voltage Figure 5. Radiation Pattern for Red, Red Orange and Amber
Figure 6. Maximum pulse current vs. ambient temperature.
Derated based on TA = 25°C, RJ-A = 50°C/W.
Figure 7. Maximum pulse current vs. ambient temperature.
Derated based on TA = 85°C, RJ-A = 50°C/W.
0
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
1
530 545 560 575 590 605 620 635 650 665 680
WAVELENGTH - nm
RELATIVE INTENSITY
AMBER
RED ORANGE
RED
0
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
1
-90-60 -30 0 30 60 90
ANGULAR DISPLACEMENT - DEGREES
NORMALIZED INTENSITY
0
0.2
0.4
0.6
0.8
1
1.2
1.4
1.6
0100 200 300 400 500
DC FORWARD CURRENT - mA
RELATIVE LUMINOUS FLUX
(NORMALIZED AT 350 mA)
0
50
100
150
200
250
300
350
400
450
500
0 0.5 11.5 22.5 3
FORWARD VOLTAGE - V
FORWARD CURRENT - mA
0.0
0.2
0.4
0.6
0.8
1.0
1.2
1.4
0.000010.00010.0010.010.1110100
PULSE DURATION, tp - sec
PULSE CURRENT, IP - A
0.0
0.2
0.4
0.6
0.8
1.0
1.2
1.4
0.000010.00010.0010.010.1110100
PULSE DURATION, tp - sec
PULSE CURRENT, IP - A
D =
0.05
0.10
0.25
0.50
1.00
D =
0.05
0.10
0.25
0.50
1.00
6
Figure 8. Relative Light Output vs. Junction Temperature Figure 9. Forward Voltage Shift vs. Junction Temperature
AlInGaP
Figure 10. Maximum Forward Current vs. Ambient Temperature.
Derated based on TJMAX = 125°C, RJ-A = 30°C/W, 40°C/W and 50°C/W
Figure 11. Maximum Forward Current vs. Ambient Slug Temperature.
Derated based on TJMAX = 125°C, RJ-MS = 9°C/W
0.0
20.0
40.0
60.0
80.0
100.0
120.0
140.0
160.0
180.0
200.0
220.0
240.0
-50 -250 255075100 125
JUNCTION TEMPERATURE, TJ -°C
RELATIVE LIGHT OUTPUT - %
(NORMALIZED AT 25°C)
-0.30
-0.20
-0.10
0.00
0.10
0.20
0.30
0.40
-50 -250255075100 125
FORWARD VOLTAGE SHIFT - V
(NORMALIZED AT 25°C)
AMBER
RED
RED-ORANGE
AMBER
RED
RED ORANGE
JUNCTION TEMPERATURE, TJ -°C
0
100
200
300
400
500
600
020406080100 120140
AMBIENT TEMPERATURE, T A - °C
MAX ALLOWABLE DC CURRENT - mA
RθJ-A = 30°C/W
RθJ-A = 40°C/W
RθJ-A = 50°C/W
0
100
200
300
400
500
600
020406080100 120140
METAL SLUG TEMPERATURE, TMS - °C
MAX ALLOWABLE DC CURRENT - mA
RθJ-MS = 9°C/W
7
Figure 12. Relative Intensity vs. Wavelength for Cool and Warm White Figure 13. Relative Intensity vs. Wavelength for Blue, Royal Blue, Cyan and
Green
Figure 14. Relative Luminous Flux vs. Mono Pulse Current Figure 15. Forward Current vs. Forward Voltage
InGaN
Figure 16. Radiation Pattern for Blue, Royal Blue, Cyan and Green Figure 17. Radiation Pattern for Cool White, Neutral White and Warm White
0.0
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
1.0
380 430 480 530 580 680 730 780
WAVELENGTH - nm
RELATIVE INTENSITY
WARM WHITE
COOL WHITE
630
0
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
1
380 405 430 455 480 505 530 555 580 605 630
WAVELENGTH - nm
RELATIVE INTENSITY
GREEN
BLUE
ROYAL BLUE
CYAN
0
0.2
0.4
0.6
0.8
1
1.2
1.4
0100 200 300 400 500
DC FORWARD CURRENT - mA
RELATIVE LUMINOUS FLUX
(NORMALIZED AT 350 mA)
0
50
100
150
200
250
300
350
400
450
500
0 0.5 11.5 22.5 3 3.5 4
FORWARD VOLTAGE - V
FORWARD CURRENT - mA
GREEN
WHITE
BLUE
ROYAL BLUE
CYAN
ANGULAR DISPLACEMENT - DEGREES
0
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
1
-90-60 -30 0 30 60 90
NORMALIZED INTENSITY
0
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
1
-90-60 -30 0 30 60 90
ANGULAR DISPLACEMENT - DEGREES
NORMALIZED INTENSITY
GREEN
ROYAL BLUE
BLUE
CYAN
8
Figure 20. Relative Light Output vs. Junction Temperature Figure 21. Forward Voltage Shift vs. Junction Temperature
Figure 22. Maximum Forward Current vs. Ambient Temperature. Derated
based on TJMAX = 150°C, RJ-A = 30°C/W, 40°C/W and 50°C/W
Figure 23. Maximum Forward Current vs. Metal Slug Temperature. Derated
based on TJMAX = 150°C, RJ-MS = 9°C/W.
InGaN
Figure 18. Maximum pulse current vs. ambient temperature.
Derated based on TA = 25°C, RθJ-A = 50°C/W.
Figure 19. Maximum pulse current vs. ambient temperature.
Derated based on TA = 85°C, RθJ-A = 50°C/W.
0.0
0.2
0.4
0.6
0.8
1.0
1.2
1.4
0.00001 0.0001 0.001 0.01 0.1 1 10 100
PULSE CURRENT, IP-A
0.0
0.2
0.4
0.6
0.8
1.0
1.2
1.4
0.00001 0.0001 0.001 0.01 0.1 1 10 100
PULSE DURATION, tp - sec
PULSE CURRENT, IP-A
D =
0.05
0.10
0.25
0.50
1.00
PULSE DURATION, tp - sec
D=tp
T
tp
IF
T
D =
0.05
0.10
0.25
0.50
1.00
D=tp
T
tp
IF
T
0.0
10.0
20.0
30.0
40.0
50.0
60.0
70.0
80.0
90.0
100.0
110.0
120.0
-50 -25 0 25 50 75 100 125 150
JUNCTION TEMPERATURE,TJ - °C
RELATIVE LIGHT OUTPUT - %
(NORMALIZED AT 25°C)
-0.45
-0.40
-0.35
-0.30
-0.25
-0.20
-0.15
-0.10
-0.05
0.00
0.05
0.10
0.15
0.20
0.25
0.30
-50 -25 0 25 50 75 100 125 150
JUNCTION TEMPERATURE,T
J
- °C
FORWARD VOLTAGE SHIFT - V
(NORMALIZED AT 25°C)
ROYAL BLUE
BLUE
WHITE
GREEN
CYAN
BLUE
ROYAL BLUE
GREEN
WHITE
CYAN
0
100
200
300
400
500
600
0 20 40 60 80 100 120 140 160
AMBIENT TEMPERATURE, TA - °C
MAX ALLOWABLE DC CURRENT - mA
RθJ-A = 30°C/W
RθJ-A = 40°C/W
RθJ-A = 50°C/W
0
100
200
300
400
500
600
0 20 40 60 80 100 120 140 160
METAL SLUG TEMPERATURE, T MS - °C
MAX ALLOWABLE DC CURRENT - mA
RθJ-MS = 9°C/W
9
Solder
Pad
Solder
Pad
Slug
Indepdent
0.80
0.85
1.75
1.32
ø1.90
3.50
5.20
∅3.2
(Acc. to J-STD-020C)
217°C
200°C
60 - 120 SEC.
6°C/SEC. MAX.
3°C/SEC. MAX.
3°C/SEC. MAX.
150°C
255 - 260°C
100 SEC. MAX.
10 - 30 SEC.
TIME
TEMPERATURE
Figure 26. Recommended Re ow Soldering Pro le
Note: For detail information on re ow soldering of Avago surface mount
LEDs, do refer to Avago Application Note AN 1060 Surface Mounting
SMT LED Indicator Components.
Figure 24. Recommended soldering land pattern Figure 25. Recommended pick and place nozzle tip.
Inner diameter = 3.2 mm.
10
Color Bin Selection [x4]
Individual reel will contain parts from one color bin selection only.
Warm White
Selection Bin ID
0 Full Distribution
E NM, MM, N1 and M1
F PM, NM, P1 and N1
G QM, PM, Q1 and P1
H M1, N1, M0 and N0
J P1, N1, P0 and N0
K Q1, P1, Q0 and P0
L N0, M0, NA and MA
M P0, N0, PA and NA
N Q0, P0, QA and PA
Others Colors
Selection Bin ID
0 Full Distribution
Z A and B
Y B and C
W C and D
V D and E
Q A, B and C
P B, C and D
N C, D and E
M D, E and F
Option Selection Details
ASMT-J x1 1 x2 - x3 x4 x5 x6 x7
x4 - Minimum Flux Bin Selection
x5 - Maximum Flux Bin Selection
x6 - Color Bin Selection
x7 - Packaging Option
Flux / Power Bin Limit [x4, x5]
Color Bin ID
Luminous Flux (lm) / Radiometric
Power (mW) at 350 mA
Min. Max.
Blue M 13.9 18.1
N 18.1 23.5
P 23.5 30.6
Other Colors R 39.8 51.7
S 51.7 67.2
T 67.2 87.4
U 87.4 99.6
V 99.6 113.6
Royal Blue M 225.0 275.0
N 275.0 355.0
P 355.0 435.0
Tolerance for each bin limits is ±10%
Cool White
Selection Bin ID
0 Full Distribution
E VM, UM, VN and UN
F WM, VM, WN and VN
G XM, WM, XN and WN
H UN, VN, U0 and V0
J WN, VN, W0 and V0
K XN, WN, X0 and W0
L V0, U0, VP and UP
M W0, V0, WP, VP and WQ
N X0, W0, XP, WP and WQ
P Y0
Q YA
Neutral White
Selection Bin ID
0 Full Distribution
E SM, RM, S1 and R1
F TM, SM, TN and S1
G S1, R1, S0 and R0
H TN, S1, T0 and S0
J S0, R0, SA and RA
K T0, S0, TP and SA
11
0.26
0.28
0.30
0.32
0.34
0.36
0.38
0.40
0.42
0.260.28 0.30 0.320.34 0.36 0.38 0.40
X-COORDINATE
Y-COORDINATE
10000K
7000K
6300K
5000K
4500K
Y0
YA
UM
UN
UP
V0
VM
VN
VP
X0
XP
XM
XN W0
WQ
0.32
0.34
0.36
0.38
0.40
0.42
0.44
0.46
0.34 0.36 0.38 0.40 0.420.44
X-COORDINATE
Y-COORDINATE
RM
R1
R0
RA
T0
SM
S1
SA
TM
TN
TP
S0
4500K
0.32
0.34
0.36
0.38
0.40
0.42
0.44
0.46
0.48
0.38 0.40 0.420.44 0.46 0.48 0.50
X-COORDINATE
Y-COORDINATE
QM
MM
NM
Q1
QA
P1
M0
M1
MA
NA
3050K 2850K
3500K 3250K
2700K
PM
Q0 P0
PA
BLACK BODY CURVE
N1
N0
U0
WM
WN
WP
5650K
BLACK BODY CURVE
BLACK BODY CURVE
4100K
3800K
3500K
Figure 27. Color bin Structure for Cool White Figure 28. Color bin structure for Warm White
Figure 29. Color bin structure for Neutral White
12
Color Bin Limits
Cool
White
Color Limits
(Chromaticity Coordinates)
Bin UM x
y
0.365
0.386
0.348
0.385
0.347
0.372
0.367
0.400
Bin UN x
y
0.365
0.386
0.362
0.372
0.346
0.359
0.347
0.372
Bin U0 x
y
0.362
0.372
0.360
0.357
0.344
0.344
0.346
0.359
Bin UP x
y
0.360
0.357
0.357
0.342
0.343
0.331
0.344
0.344
Bin VM x
y
0.329
0.357
0.329
0.369
0.348
0.385
0.347
0.372
Bin VN x
y
0.329
0.345
0.329
0.357
0.347
0.372
0.346
0.359
Bin V0 x
y
0.329
0.331
0.329
0.345
0.346
0.359
0.344
0.344
Bin VP x
y
0.329
0.331
0.344
0.344
0.343
0.331
0.329
0.320
Bin WM x
y
0.329
0.369
0.329
0.357
0.315
0.344
0.314
0.355
Bin WN x
y
0.329
0.345
0.316
0.333
0.315
0.344
0.329
0.357
Bin W0 x
y
0.329
0.345
0.329
0.331
0.317
0.320
0.316
0.333
Bin WP x
y
0.329
0.331
0.329
0.320
0.318
0.310
0.317
0.320
Bin WQ x
y
0.329
0.320
0.329
0.310
0.319
0.300
0.318
0.310
Bin XM x
y
0.301 0.314 0.315
0.344
0.303
0.333
0.342 0.355
Bin XN x
y
0.305
0.322
0.303
0.333
0.315
0.344
0.316
0.333
Bin X0 x
y
0.308
0.311
0.305
0.322
0.316
0.333
0.317
0.320
Bin XP x
y
0.308
0.311
0.317
0.320
0.319
0.300
0.311
0.293
Bin YO x
y
0.308
0.311
0.283
0.284
0.274
0.301
0.303
0.333
Bin YA x
y
0.308
0.311
0.311
0.293
0.290
0.270
0.283
0.284
Tolerance: ±0.01
Warm
White
Color Limits
(Chromaticity Coordinates)
Bin MM x
y
0.471
0.451
0.460
0.430
0.473
0.432
0.486
0.455
Bin M1 x
y
0.460
0.430
0.453
0.416
0.467
0.419
0.473
0.432
Bin M0 x
y
0.453
0.416
0.444
0.399
0.459
0.403
0.467
0.419
Bin MA x
y
0.459
0.403
0.444
0.399
0.436
0.384
0.451
0.389
Bin NM x
y
0.454
0.446
0.444
0.426
0.460
0.430
0.471
0.451
Bin N1 x
y
0.444
0.426
0.438
0.412
0.453
0.416
0.460
0.430
Bin N0 x
y
0.438
0.412
0.429
0.394
0.444
0.399
0.453
0.416
Bin NA x
y
0.444
0.399
0.429
0.394
0.422
0.379
0.436
0.384
Bin PM x
y
0.438
0.440
0.430
0.421
0.444
0.426
0.454
0.446
Bin P1 x
y
0.430
0.421
0.424
0.407
0.438
0.412
0.444
0.426
Bin P0 x
y
0.424
0.407
0.416
0.389
0.429
0.394
0.438
0.412
Bin PA x
y
0.429
0.394
0.416
0.389
0.410
0.374
0.422
0.379
Bin QM x
y
0.421
0.433
0.414
0.414
0.430
0.421
0.438
0.440
Bin Q1 x
y
0.414
0.414
0.409
0.400
0.424
0.407
0.430
0.421
Bin Q0 x
y
0.409
0.400
0.402
0.382
0.416
0.389
0.424
0.407
Bin QA x
y
0.416
0.389
0.402
0.382
0.396
0.367
0.410
0.374
Tolerance: ±0.01
13
Neutral
White
Color Limits
(Chromaticity Coordinates)
Bin RM x
y
0.421
0.433
0.414
0.414
0.397
0.406
0.402
0.423
Bin R1 x
y
0.414
0.414
0.409
0.400
0.392
0.391
0.397
0.406
Bin R0 x
y
0.392
0.391
0.387
0.374
0.402
0.382
0.409
0.400
Bin RA x
y
0.387
0.374
0.383
0.360
0.396
0.367
0.402
0.382
Bin SM x
y
0.402
0.423
0.397
0.406
0.382
0.397
0.386
0.413
Bin S1 x
y
0.397
0.406
0.392
0.391
0.378
0.382
0.382
0.397
Bin S0 x
y
0.392
0.391
0.387
0.374
0.374
0.366
0.378
0.382
Bin SA x
y
0.387
0.374
0.383
0.360
0.370
0.351
0.374
0.366
Bin TM x
y
0.386
0.413
0.382
0.397
0.365
0.386
0.367
0.400
Bin TN x
y
0.382
0.397
0.378
0.382
0.362
0.372
0.365
0.386
Bin T0 x
y
0.378
0.382
0.374
0.366
0.360
0.357
0.362
0.372
Bin TP x
y
0.374
0.366
0.370
0.351
0.357
0.342
0.360
0.357
Tolerance: ±0.01
Example
ASMT-JY11-NST01
ASMT-JY11-Nxxxx – Warm White, InGaN,
Electrically isolated Heat Sink
X1 = S – Minimum Flux Bin S
X2 = T – Maximum Flux Bin T
X3 = 0 – Full Distribution
X4 = 1 – Tape and Reel Option
Packaging Option [x7]
Selection Option
1 Tape and Reel
Color Bin ID
Dominant Wavelength (nm)
at 350 mA
Min. Max.
Red – 620.0 635.0
Red Orange – 610.0 620.0
Amber B 587.0 589.5
C 589.5 592.0
D 592.0 594.5
E 594.5 597.0
Blue A 455.0 460.0
B 460.0 465.0
C 465.0 470.0
D 470.0 475.0
Cyan C 490.0 495.0
D 495.0 500.0
E 500.0 505.0
F 505.0 510.0
G 510.0 515.0
H 515.0 520.0
Green A 515.0 520.0
B 520.0 525.0
C 525.0 530.0
D 530.0 535.0
Tolerance: ± 1 nm
Color Bin ID
Peak Wavelength (nm) at 350 mA
Min. Max.
Royal Blue C 440.0 445.0
D 445.0 450.0
E 450.0 455.0
F 455.0 460.0
Tolerance: ±2 nm
14
Tape and Reel – Option 1
Figure 30. Carrier Tape Dimensions
Notes:
1. Empty component pockets sealed with top cover tape.
2. 250 or 500 pieces per reel.
3. Drawing not to scale.
4. All dimensions are in millimeters.
Figure 31. Reel dimensions
178 ±1
4 ±0.5 5 ±0.5
3 ±0.5 ø21.0 ±0.5
ø10 ø13.1 ±0.5
ø60 ±0.5
13.2 ±.5
16.0 ±.5
4.00 ±.10
8.00 ±.10
12.00 +.30
.10
4.15 ±.10 0.25 ±0.02
2.05 ±.10
8°ø1.5 ±0.25
2.00 ±.05
5.50 ±.05
1.75 ±0.01
0.25 ±0.02
2.01 ±0.1
ø1.5 ±0.1
5°
5.25 ±.10
DISCLAIMER: Avago’s products and software are not speci cally designed, manufactured or authorized for sale
as parts, components or assemblies for the planning, construction, maintenance or direct operation of a nuclear
facility or for use in medical devices or applications. Customer is solely responsible, and waives all rights to
make claims against avago or its suppliers, for all loss, damage, expense or liability in connection with such use.
For product information and a complete list of distributors, please go to our web site: www.avagotech.com
Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies in the United States and other countries.
Data subject to change. Copyright © 2005-2011 Avago Technologies. All rights reserved.
AV02-1770EN - May 24, 2011
CATHODE SIDE
USER FEED DIRECTION
PRINTED LABEL
Figure 32. Reeling Orientation