Bank Module Supercapacitors S01 Series, Molded Plastic Cell Module Overview Applications KEMET S01 Series Supercapacitors are bank modules in which the cells are encased in a plastic holder. Typical applications include wind turbine pitch control, starting systems, automotive subsystems, backup power/UPS, ride through/power conditioning, and renewable energy systems. Benefits * * * * * * * * * 16 - 80 V working voltage Individually balanced cells IP-54 rated Threaded, protected terminals Operating temperature range of -40C to +65C Optional voltage and over temperature signal Cycle life > 500,000 cycles RoHS Compliant Made in USA Part Number System S01 Series Supercapacitor, Bank Module, Molded Plastic Holder P M Configuration Configuration Code Capacitor Type Code Balancing P = Passive without clamping M = Snap-in, multi-pin style 5805 K 16 A Uxxx C-Spec Capacitance Code (F) Capacitance Rated Voltage (VDC) Tolerance Termination Code First three digits represent significant figures. Fourth digit specifies number of zeros. K = 10% R = -0% A = The first mechanical configuration of a particular part number 016 = 16 V 080 = 80 V Blank = No monitor U808 = Digital Overvoltage and analog over temperature monitor U809 = Digital Overvoltage and digital over temperature monitor U810 = Overvoltage and Overtemperature monitor through CAN Bus One world. One KEMET (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com S6005_S01 * 3/7/2014 1 Bank Module Supercapacitors - S01 Series, Molded Plastic Cell Module Dimensions - Millimeters S01PM5805K016A S01PM1205R080A S01PM1205R080AU809 Part Number L W H Nominal Tolerance Nominal Tolerance Nominal Tolerance S01PM5805K016A 225.37 +/-1.0 50.8 +/-1.0 75.19 +/-1.0 S01PM1205R080A 238 +/-1.0 247 +/-1.0 74 +/-1.0 S01PM1205R080AU809 238 +/-1.0 247 +/-1.0 74 +/-1.0 (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com S6005_S01 * 3/7/2014 2 Bank Module Supercapacitors - S01 Series, Molded Plastic Cell Module Performance Characteristics Item Performance Characteristics Rated Voltage 16 - 81 VDC Surge Voltage 17 - 85 VDC Isolation Voltage/High Potential Capacitance Range Capacitance Tolerance 2,500 V 12 - 58 F 10%, -0% Temperature Range -40C to +65C Storage Temperature Range -40C to +70C Temperature Characteristics Life, DC Life, Endurance Life, Shelf Life, Cycle Maximum Number in Series Standards Compliance Capacitance Change: Within 5% of initial specified value Internal Resistance (ESR): Within 100% of initial specified value 10 years, rated voltage, 25C C < 30% decrease, ESR < 100% increase 1,000 hours, rated voltage, 65C C < 30% decrease, ESR < 100% increase 1,000 hours, no voltage, 70C C < 20% decrease, ESR < 100% increase > 500,000 cycles, rated to half rated voltage, 25C C < 30% decrease, ESR < 100% increase 40 (750 V) RoHS, UL810a Approvals Series / Partnumber S01PM5805K016A S01PM1205R080A S01PM1205R080AU809 S02AT5006R016AU808 S02AT1656R048AU808 Date completed (or estimated) Test Type Test Standard Vibration IEC 60068-2-6 Mechanical shock IEC 60068-2-27 Underwriters Laboratory UL810A March 2011 SAE Safety And Abuse SAE J2464 pending Q1 2014 pending January 2011 pending Q1 2014 (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com S6005_S01 * 3/7/2014 3 Bank Module Supercapacitors - S01 Series, Molded Plastic Cell Module Environmental Compliance All KEMET supercapacitors are RoHS Compliant. Table 1 - Ratings & Part Number Reference Part Number S01PM5805K016A S01PM1205R080A1 S01PM1205R080AU8091 58 11.6 11.6 10% -0% -0% Rated Voltage (V) 16 81 81 Surge Voltage (V) 17 85 85 Impedance [AC 1 kHz] (m) 15 80 80 ESR [DC] (m) 23 90 90 Parameter Capacitance (F) Capacitance Tolerance Leakage Current [72 h] (mA) <25 125 125 Continuous Current Rating (A) 19 10 10 Maximum Peak Current 1 s (A) 200 200 200 Short Circuit Peak Current (A) 1,000 700 700 Passive Passive Passive No No Yes Cell Management Overvoltage & Over Temperature Monitor Energy/Power Maximum Stored Energy (Wh) 2.1 10.6 10.6 Energy Density (Wh/kg) 2.8 2.7 2.7 Energy Density (Wh/L) 3.6 3.5 3.5 Power Density (kW/kg) 5.8 6.3 6.3 Power Density (kW/L) 7.4 2.3 2.3 Maximum Power (kW/kg) 1.8 3 3 PM PM PM Physical Configuration Code L x W x H (mm) 1 225 x 51 x 76 238 x 247 x 74 238 x 247 x 74 Weight (kg) 0.76 3 3 Volume (ml) 594 3900 3900 Preliminary (See Prototype Sample Disclaimer) (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com S6005_S01 * 3/7/2014 4 Bank Module Supercapacitors - S01 Series, Molded Plastic Cell Module Mounting Specific users guide with mounting instructions ship with module. Packaging Quantities Capacitance (F) Rated Voltage Package Type Package Quantity S01PM5805K016A 58 16 Box 1 2 lbs (0.9 kgs) 10.0" (254 mm) 6.0" (153 mm) 3.5" (89 mm) S01PM1205R080A 12 80 Carton 1 7 lbs (3.2 kgs) 11.0" (279 mm) 8.5" (216 mm) 3.5" (89 mm) S01PM1205R080AU809 12 80 Carton 1 7 lbs (3.2 kgs) 11.0" (279 mm) 8.5" (216 mm) 3.5" (89 mm) Part Number Box Weight Box Length Box Width Box Height Standard Marking * * * * KEMET logo Rated voltage Rated capacitance Terminal markings (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com S6005_S01 * 3/7/2014 5 Bank Module Supercapacitors - S01 Series, Molded Plastic Cell Module KEMET Corporation World Headquarters Europe Asia Southern Europe Paris, France Tel: 33-1-4646-1006 Northeast Asia Hong Kong Tel: 852-2305-1168 Mailing Address: P.O. Box 5928 Greenville, SC 29606 Sasso Marconi, Italy Tel: 39-051-939111 Shenzhen, China Tel: 86-755-2518-1306 www.kemet.com Tel: 864-963-6300 Fax: 864-963-6521 Central Europe Landsberg, Germany Tel: 49-8191-3350800 Corporate Offices Fort Lauderdale, FL Tel: 954-766-2800 Kamen, Germany Tel: 49-2307-438110 North America Northern Europe Bishop's Stortford, United Kingdom Tel: 44-1279-460122 2835 KEMET Way Simpsonville, SC 29681 Southeast Lake Mary, FL Tel: 407-855-8886 Espoo, Finland Tel: 358-9-5406-5000 Northeast Wilmington, MA Tel: 978-658-1663 Beijing, China Tel: 86-10-5829-1711 Shanghai, China Tel: 86-21-6447-0707 Taipei, Taiwan Tel: 886-2-27528585 Southeast Asia Singapore Tel: 65-6586-1900 Penang, Malaysia Tel: 60-4-6430200 Bangalore, India Tel: 91-806-53-76817 Central Novi, MI Tel: 248-306-9353 West Milpitas, CA Tel: 408-433-9950 Mexico Guadalajara, Jalisco Tel: 52-33-3123-2141 Note: KEMET reserves the right to modify minor details of internal and external construction at any time in the interest of product improvement. KEMET does not assume any responsibility for infringement that might result from the use of KEMET Capacitors in potential circuit designs. KEMET is a registered trademark of KEMET Electronics Corporation. (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com S6005_S01 * 3/7/2014 6 Bank Module Supercapacitors - S01 Series, Molded Plastic Cell Module Disclaimer All product specifications, statements, information and data (collectively, the "Information") in this datasheet are subject to change. The customer is responsible for checking and verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed. All Information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied. Statements of suitability for certain applications are based on KEMET Electronics Corporation's ("KEMET") knowledge of typical operating conditions for such applications, but are not intended to constitute - and KEMET specifically disclaims - any warranty concerning suitability for a specific customer application or use. The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by KEMET with reference to the use of KEMET's products is given gratis, and KEMET assumes no obligation or liability for the advice given or results obtained. Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. Although all product-related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other measures may not be required. Prototype Sample Disclaimer The Customer acknowledges the following limitations of the prototype samples: (1) Prototype samples are manufactured from preliminary designs and manufacturing processes, may not represent final designs, have not been released for commercial use and are not subject to the same quality control procedures applicable to released products; (2) Prototype samples are not qualified parts and are provided as-is by KEMET Electronics Corporation, which specifically disclaims any and all warranties and guarantees, explicit or implied, including without limitation the warranties of merchantability and fitness for a particular purpose or use; (3) Prototype samples are not intended for commercial use, are provided for engineering evaluation only and are not recommended for use in the Customer's production line; and (4) The Customer assumes the risk of any and all uses that the Customer makes of the prototype samples. Prototype Copyright Notice COPYRIGHT KEMET ELECTRONICS CORPORATION 2013, all rights reserved (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com S6005_S01 * 3/7/2014 7 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: KEMET: S01PM1205R080A