S01PM1205R080A - Kemet - Datasheet.Live

1© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com S6005_S01 • 3/7/2014

One world. One KEMET

Benets

• 16 – 80 V working voltage

• Individually balanced cells

• IP–54 rated

• Threaded, protected terminals

• Operatingtemperaturerangeof-40˚Cto+65˚C

• Optional voltage and over temperature signal

• Cycle life > 500,000 cycles

• RoHS Compliant

• Made in USA

Overview

KEMET S01 Series Supercapacitors are bank modules in which

the cells are encased in a plastic holder.

Applications

Typical applications include wind turbine pitch control, starting

systems, automotive subsystems, backup power/UPS, ride

through/power conditioning, and renewable energy systems.

Bank Module Supercapacitors

S01 Series, Molded Plastic Cell Module

Part Number System

S01 P M 5805 K16 AUxxx

Series Conguration

Code Balancing

CongurationCode

Capacitor Type

Capacitance Code

(µF)

Capacitance

Tolerance

Rated Voltage

(VDC)

Termination

Code

C-Spec

Supercapacitor,

Bank Module,

Molded Plastic

Holder

P = Passive

without

clamping

M = Snap-in,

multi-pin style

First three digits

representsignicant

gures.Fourthdigit

speciesnumberof

zeros.

K = ±10%

R = -0%

016 = 16 V

080 = 80 V

A=Therst

mechanical

conguration

of a

particular

part number

Blank = No monitor

U808 = Digital Overvoltage

and analog over temperature

monitor

U809 = Digital Overvoltage

and digital over temperature

monitor

U810 = Overvoltage and

Overtemperature monitor

through CAN Bus

2© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com S6005_S01 • 3/7/2014

Bank Module Supercapacitors – S01 Series, Molded Plastic Cell Module

Dimensions – Millimeters

S01PM5805K016A

S01PM1205R080A

S01PM1205R080AU809

Part Number

Nominal Tolerance Nominal Tolerance Nominal Tolerance

S01PM5805K016A 225.37 +/-1.0 50.8 +/-1.0 75.19 +/-1.0

S01PM1205R080A 238 +/-1.0 247 +/-1.0 74 +/-1.0

S01PM1205R080AU809 238 +/-1.0 247 +/-1.0 74 +/-1.0

3© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com S6005_S01 • 3/7/2014

Bank Module Supercapacitors – S01 Series, Molded Plastic Cell Module

Performance Characteristics

Item Performance Characteristics

Rated Voltage 16 – 81 VDC

Surge Voltage 17 – 85 VDC

Isolation Voltage/High Potential 2,500 V

Capacitance Range 12 – 58 F

Capacitance Tolerance ±10%, -0%

Temperature Range -40°Cto+65°C

Storage Temperature Range -40°Cto+70°C

Temperature Characteristics

CapacitanceChange:Within±5%ofinitialspeciedvalue

InternalResistance(ESR):Within100%ofinitialspeciedvalue

Life, DC

10 years, rated voltage, 25°C

ΔC<30%decrease,ESR<100%increase

Life, Endurance

1,000 hours, rated voltage, 65°C

ΔC<30%decrease,ESR<100%increase

Life, Shelf

1,000 hours, no voltage, 70°C

ΔC<20%decrease,ESR<100%increase

Life, Cycle

> 500,000 cycles, rated to half rated voltage, 25°C

ΔC<30%decrease,ESR<100%increase

Maximum Number in Series 40 (750 V)

Standards Compliance RoHS, UL810a

Approvals

Series / Partnumber Test Type Test Standard

Date completed

(or estimated)

S01PM5805K016A

Vibration IEC 60068-2-6

January 2011

Mechanical shock IEC 60068-2-27

Underwriters Laboratory UL810A March 2011

SAE Safety And Abuse SAE J2464 pending Q1 2014

S01PM1205R080A

S01PM1205R080AU809

S02AT5006R016AU808

S02AT1656R048AU808

pending pending Q1 2014

4© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com S6005_S01 • 3/7/2014

Bank Module Supercapacitors – S01 Series, Molded Plastic Cell Module

Environmental Compliance

All KEMET supercapacitors are RoHS Compliant.

Table 1 – Ratings & Part Number Reference

Part Number S01PM5805K016A S01PM1205R080A1S01PM1205R080AU8091

Parameter

Capacitance (F) 58 11.6 11.6

Capacitance Tolerance ±10% -0% -0%

Rated Voltage (V) 16 81 81

Surge Voltage (V) 17 85 85

Impedance[AC1kHz](mΩ) ≤15 ≤80 ≤80

ESR[DC](mΩ) ≤23 ≤90 ≤90

Leakage Current [72 h] (mA) <25 125 125

Continuous Current Rating (A) 19 10 10

Maximum Peak Current 1 s (A) 200 200 200

Short Circuit Peak Current (A) 1,000 700 700

Cell Management Passive Passive Passive

Overvoltage & Over Temperature

Monitor

No No Yes

Energy/Power

Maximum Stored Energy (Wh) 2.1 10.6 10.6

Energy Density (Wh/kg) 2.8 2.7 2.7

Energy Density (Wh/L) 3.6 3.5 3.5

Power Density (kW/kg) 5.8 6.3 6.3

Power Density (kW/L) 7.4 2.3 2.3

Maximum Power (kW/kg) 1.8 3 3

Physical

CongurationCode

L x W x H (mm) 225 x 51 x 76 238 x 247 x 74 238 x 247 x 74

Weight (kg) 0.76 3 3

Volume (ml) 594 3900 3900

1Preliminary (See Prototype Sample Disclaimer)

5© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com S6005_S01 • 3/7/2014

Bank Module Supercapacitors – S01 Series, Molded Plastic Cell Module

Mounting

Specicusersguidewithmountinginstructionsshipwithmodule.

Packaging Quantities

Part Number Capacitance

(F)

Rated

Voltage

Package

Type

Package

Quantity

Box

Weight

Box

Length

Box

Width

Box

Height

S01PM5805K016A 58 16 Box 1 2 lbs (0.9 kgs) 10.0" (254 mm) 6.0" (153 mm) 3.5" (89 mm)

S01PM1205R080A 12 80 Carton 1 7 lbs (3.2 kgs) 11.0" (279 mm) 8.5" (216 mm) 3.5" (89 mm)

S01PM1205R080AU809 12 80 Carton 1 7 lbs (3.2 kgs) 11.0" (279 mm) 8.5" (216 mm) 3.5" (89 mm)

Standard Marking

• KEMET logo

• Rated voltage

• Rated capacitance

• Terminal markings

6© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com S6005_S01 • 3/7/2014

Bank Module Supercapacitors – S01 Series, Molded Plastic Cell Module

KEMET Corporation

World Headquarters

2835 KEMET Way

Simpsonville, SC 29681

Mailing Address:

P.O. Box 5928

Greenville, SC 29606

www.kemet.com

Tel: 864-963-6300

Fax: 864-963-6521

Corporate Of ces

Fort Lauderdale, FL

Tel: 954-766-2800

North America

Southeast

Lake Mary, FL

Tel: 407-855-8886

Northeast

Wilmington, MA

Tel: 978-658-1663

Central

Novi, MI

Tel: 248-306-9353

West

Milpitas, CA

Tel: 408-433-9950

Mexico

Guadalajara, Jalisco

Tel: 52-33-3123-2141

Europe

Southern Europe

Paris, France

Tel: 33-1-4646-1006

Sasso Marconi, Italy

Tel: 39-051-939111

Central Europe

Landsberg, Germany

Tel: 49-8191-3350800

Kamen, Germany

Tel: 49-2307-438110

Northern Europe

Bishop’s Stortford, United Kingdom

Tel: 44-1279-460122

Espoo, Finland

Tel: 358-9-5406-5000

Asia

Northeast Asia

Hong Kong

Tel: 852-2305-1168

Shenzhen, China

Tel: 86-755-2518-1306

Beijing, China

Tel: 86-10-5829-1711

Shanghai, China

Tel: 86-21-6447-0707

Taipei, Taiwan

Tel: 886-2-27528585

Southeast Asia

Singapore

Tel: 65-6586-1900

Penang, Malaysia

Tel: 60-4-6430200

Bangalore, India

Tel: 91-806-53-76817

Note: KEMET reserves the right to modify minor details of internal and external construction at any time in the interest of product improvement. KEMET does not

assume any responsibility for infringement that might result from the use of KEMET Capacitors in potential circuit designs. KEMET is a registered trademark of

KEMET Electronics Corporation.

7© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com S6005_S01 • 3/7/2014

Bank Module Supercapacitors – S01 Series, Molded Plastic Cell Module

Disclaimer

All product speciﬁ cations, statements, information and data (collectively, the “Information”) in this datasheet are subject to change. The customer is responsible for checking and

verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed.

All Information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied.

Statements of suitability for certain applications are based on KEMET Electronics Corporation’s (“KEMET”) knowledge of typical operating conditions for such applications, but are

not intended to constitute – and KEMET speciﬁ cally disclaims – any warranty concerning suitability for a speciﬁ c customer application or use. The Information is intended for use only

by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise

provided by KEMET with reference to the use of KEMET’s products is given gratis, and KEMET assumes no obligation or liability for the advice given or results obtained.

Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still

occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective

circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage.

Although all product–related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other measures may not

be required.

Prototype Sample Disclaimer

The Customer acknowledges the following limitations of the prototype samples:

(1) Prototype samples are manufactured from preliminary designs and manufacturing processes, may not represent nal designs, have not been released for

commercial use and are not subject to the same quality control procedures applicable to released products;

(2) Prototype samples are not qualied parts and are provided as-is by KEMET Electronics Corporation, which specically disclaims any and all warranties and

guarantees, explicit or implied, including without limitation the warranties of merchantability and tness for a particular purpose or use;

(3) Prototype samples are not intended for commercial use, are provided for engineering evaluation only and are not recommended for use in the Customer’s

production line; and

(4) The Customer assumes the risk of any and all uses that the Customer makes of the prototype samples.

Prototype Copyright Notice

Mouser Electronics

Authorized Distributor

Click to View Pricing, Inventory, Delivery & Lifecycle Information:

KEMET:

S01PM1205R080A