1SP0335x2xx-MBN1200H45E2-H
www.IGBT-Driver.com Page 1
1SP0335x2xx-MBN1200H45E2-H
Preliminary Data Sheet
Compact, high-performance, plug-and-play single-channel IGBT driver based
on SCALE-2 technology for individual and parallel-connected modules in
2-lev el, 3-level and multilevel converter topologies
Abstract
The SCALE -2 pl ug -and-pla y dr iver 1SP 03 35x2x x-MBN1200H45E2-H is a compact s ingle-c hanne l i nte lli ge nt ga te
driver designed for Hitachi IGBTs MBN1200H45E2-H. The master driver 1SP0335x2Mx-MBN1200H45E2-H
features a fiber-optic interface. It can be used as stand-alone driver or in conjunction with up to three
1SP0335D2Sx-MBN1200H45E2-H slaves to drive up to four parallel-connected IGBT modules of type
MBN1200H45E2-H.
The DC/DC power supply must be purchased as a separate unit (one per master driver).
For drivers adapted to other types of high-power and high-voltage IGBT modules, refer to:
www.IGBT-Driver.com/go/plug-and-play
Features Applications
Plug-and-pla y solution
Allows parallel connection of IGBT modules
For 2-level, 3-level and multilevel topologies
Fiber-op tic links (master)
Built-in interface to 1SP0335D2Sx (slave)
Duty cycle 0...100%
Dynamic Advanced Active Clamping DA2C
Dynamic IGBT short-circ uit pr otection
Monitoring of s upply voltage
Monitoring of gat e voltage
Extremely reliable; long service life
Shortens application development time
Suitable for MBN1200H45E2-H
Traction
Railroad power supplies
Light rail vehicles
HVDC
Flexible AC transmission systems (FACTS)
Medium-voltage converters
Industrial drives
Wind-power converters
Medical applications
Research
And many others
1SP0335x2xx-MBN1200H45E2-H
Prelim i nary Dat a Shee t
www.IGBT-Driver.com Page 2
Safety Notice!
The data contained in this data sheet is intended exclusively for technically trained staff. Handling all high-
voltage equipment involves risk to life. Strict compliance with the respective safet y regulations is mandatory!
Any handling of electroni c devices is subject to the general specifications for protecting electrostatic-sensitive
devices according to inte rn ational sta ndard IE C 60747-1, Chapter IX or European standard EN 1000 15 (i. e. the
workplace, tools, etc. must comply with these standar ds). Otherw ise, this product may be damaged.
Impor tant Product Docum enta tion
This data sheet contains only product-specific data. For a detailed description, must-rea d application notes and
common data that apply to the whole series, please refer to the “Description & Application Manual for
1SP0335 SCALE-2 IGBT Drivers” on www.IGBT-Driver.com/go/1SP0335.
When applying SCALE-2 plug-and-play drivers, please note that these drivers are specifically adapted to a
part icula r t ype of IGBT module. Therefore, the type designation of SCALE-2 pl ug -and-play drivers also include s
the type designation of the corresponding IGBT module. These drivers are not valid for IGBT modules other
than those specified. Incorrect use may result in failure.
Mechan i ca l Dimensions
Dimensions: See the relevant “Descrip tion and Application Manual”
Mounting pri nciple: Connected to IGBT module with screws
Fiber-Optic Interfaces (1SP0335x2Mx)
Interface Remarks Part type #
Drive signal input 1SP0335V, fiber-optic receiver (Notes 1, 2) HFBR-2522Z
Drive signal input 1SP0335S, fiber -optic receiver ( Notes 1, 2) HFBR-2412Z
Status output 1SP0335V, fiber-optic transmitter (Notes 1, 3) HFBR-1522Z
Status output 1SP0335S, fiber-optic transmitter (Notes 1, 3) HFBR-1412Z
Electri cal Connectors
Interface Remarks Part type #
Power supply connector X1 On-board conne ctor (Note 4) 214012
Bus connectors X2 and X3 On-board connectors (Note 5) 214013
1SP0335x2xx-MBN1200H45E2-H
Prelim i nary Dat a Shee t
www.IGBT-Driver.com Page 3
Absolut e Maxi mum Ra t ing s
Parameter Remarks Min Max Unit
Supply voltage VDC V DC to COM 0 30 V
Average sup ply cur rent IDC 1SP0335x2Mx only (Note 6) 215 mA
Average sup ply cur rent IDC 1SP0335x2Mx with three 1SP0335D2Sx (Note 6) 740 mA
Gate output power 1SP0335x2Mx, Ta < 70°C (Note 7) 3.5 W
1SP0335x2Mx, Ta = 85°C (Note 7) 2.5 W
Gate output power 1SP0335D2Sx, Ta < 7 0°C (Note 8) 3.3 W
1SP0335D2Sx, Ta = 85°C (Note 8) 2.3 W
Switching frequency F 1SP 0 33 5x 2Mx , Ta < 70°C 13.0 kHz
1SP033 5x 2M x, Ta = 85° C 9.1 kHz
Switching frequency F 1SP0335D2Sx, Ta < 70°C 12.2 kHz
1SP0335D2Sx, Ta = 85°C 8.3 kHz
Gate peak current Iout Note 9 -35 +35 A
DC-link voltage Switching operation (Note 10) 3000 V
Off state (Note 11) 3550 V
Operating voltage Collector-emitter voltage 4500 Vpeak
Max. emitter-emitter voltage Between parallel connected drivers (Note 12) 200 Vpeak
|dV/dt| Between parallel connected drivers (Note 13) 50 kV/μs
Max. interface current X2 and X3, total RMS value (Note 14) 4 Arms
X2 and X3, to tal peak value (Note 14) 20 Apeak
Operating temperature -40 +85 °C
Storage temperature -40 +90 °C
Recommended Operating Conditions
Power Supply Remarks Min Typ Max Unit
Supply voltage VDC To COM 23.5 25 26.5 V
1SP0335x2xx-MBN1200H45E2-H
Prelim i nary Dat a Shee t
www.IGBT-Driver.com Page 4
Electrical Characteristics
All data refer to +25°C and VDC = 25V
unless otherwise specified
Power Supply Remarks Min Typ Max Unit
Supply current IDC Without load, only 1SP0335x2Mx 45 mA
Without load, per additional 1SP0335D2Sx 20 mA
Power Supply Monitoring Remarks Min Typ Max Unit
Supply threshold Viso-Vee Clear fault 12.1 12.6 13.1 V
Set fault (Note 15) 11.5 12.0 12.5 V
Monitoring hysteresis Set/clear fault 0.35 V
Supply threshold Vee-VCOM Clear fault 5 5.15 5.3 V
Set fault (Note 15) 4.7 4.85 5 V
Monitoring hysteresis Set/clear fault 0.15 V
Bus to 1SP0335D2Sx Remarks Min Typ Max Unit
Supply voltage VDC V
Turn-off com ma nd To COM 0 V
Turn-on command To COM 15 V
Gate Monitoring Remarks Min Typ Max Unit
Turn-on threshold VGE,on,min Gmean to E, set fault (Note 16) 12.9 V
Turn-off threshol d VGE,off,max Gmean to E, set fault (Note 16) -7.6 V
Filter delay Turn-on (Note 16) 28 μs
Turn-off (Note 16) 42 μs
Short-circuit Protection Remarks Min Typ Max Unit
Static Vce-m onitoring threshold Between auxiliary terminals (Note 17) 170 V
Response time DC-l ink voltage = 3000V (Note 18) 5.8 μs
DC-link voltage = 2000V (Note 18) 5.8 μs
DC-link voltage = 1500V (Note 18) 6.0 μs
DC-link voltage = 1000V (Note 18) 7.7 μs
Delay to IGBT turn-off After the response time (Note 19) 0.3 μs
Timing Charact eristics Remarks Min Typ Max Unit
Turn-on delay td(on)
Note 20 190 ns
Turn-off delay td(off) Note 20 185 ns
Timing Charact eristics Remarks Min Typ Max Unit
Output rise time tr(out) G to E (Note 21) 9 ns
Output fall time tf(out) G to E (Note 21) 30 ns
1SP0335x2xx-MBN1200H45E2-H
Prelim i nary Dat a Shee t
www.IGBT-Driver.com Page 5
Timing Charact eristics Remarks Min Typ Max Unit
Transmission delay of fault state Note 22 90 ns
Delay to clear fault state After IGBT short circuit (Note 23) 9 μs
After gate-monitoring fault (Notes 23, 27) 1 μs
Acknowledge delay time Note 24 250 ns
Acknowledge pulse width On host side 400 700 1050 ns
Gate Output Remarks Min Typ Max Unit
Turn-on gate resist or Rg(on) Not e 25 4.1 Ω
Turn-off gate resistor Rg(off) Note 25 4.5 Ω
Auxiliary gate capacitor Cge not assembled nF
Gate voltage at turn-on Note 26 15 V
Gate-voltage at turn-off Note 26 -10 V
Footnot es to the K ey D a ta
1) The transceivers required on the host controller side are not supplied with the gate driver. It is
recommended to use the same types as used in the gate driver. For product information refer
to www.IGBT-Driver.com/go/fiberoptics
2) The recommended transmitter current at the host controller is 20mA. A higher current may increase
jitter or delay at turn-off.
3) The typical transmitter current at the gate driver is 18mA. In case of supply undervoltage, the
minimum transmitter current at the gate driver is 12mA: this is suitable for adequate plastic optical
fibers with a length of more than 10 meters.
4) This refers to the manufacturer ordering number, see www.igbt-driver.com/go/ext_erni. The
customer-side connector as well as cables with different lengths can be supplied by CONCEPT. Refer
to the “Description & Application Ma nual for 1SP0335 S CALE-2 IGBT Drivers” for more information.
5) This refers to the manufacturer ordering number, see www.igbt-driver.com/go/ext_erni. These
connectors are to be used to connect 1SP0335x2Mx (master) or 1SP0335D2Sx (slave) to
1SP033 5D2Sx (sla ve) if par allel connection of IGBT modules is required . Cables with differ ent lengths
can be supplied by CONCEPT. Refer to the “Description & Application Manual for 1SP0335 SCALE-2
IGBT Drivers” for more info rmation.
6) If the specified value is ex c eed ed, this indicates a drive r overload. It sho uld be n oted that the driver is
not protected against overload.
7) The given power can only be fully exploited without slaves 1SP0335D2Sx (no parallel connection of
IGBT modules). If t he specified value is excee ded, this indicates a driver overload. It should be noted
that the driver is not protected against overload. From 70°C to 85°C, the maximum permissible output
power can be linearly interpolated from the given data.
8) The given power can be fully exploited with slaves 1SP0335D2Sx (parallel connection of IGBT
modules). If the specified value is exceeded, this indicates a driver overl oad. It should be noted that
the driver is not protected against overload. From 70°C to 85°C, the maximum permissible output
power can be linearly interpolated from the given data.
9) The gate current is limited by the gate resistors located on the driver.
10) This limit is due to a ctive cl amping under sw itching co nditions . Re fer to the “ Description & Ap plication
Manual for 1SP0335 SCA LE-2 IGBT D rivers”.
11) Due to the Dynamic Active Advanced Clamping Function (DA2C) implemented on the driver, the DC-
link voltage ca n be increased in the off-state condition (e.g. after emergency shut-down). This value is
only vali d when t he IGBTs are in the o ff stat e (not sw itching) . The time during which the voltage can
be applied should be limited to short periods (< 60 seconds). Refer to the “Description & Application
Manual for 1SP0335 SCA LE -2 IGBT D rivers”.
1SP0335x2xx-MBN1200H45E2-H
Prelim i nary Dat a Shee t
www.IGBT-Driver.com Page 6
12) The maximum dynamic voltage between auxiliary emitters of parallel-connected drivers due to
asymmetrical operation at turn-on and turn-off must be limited to the given value.
13) Maximum allowed rate of change of auxiliary emitter voltage of parallel connected drivers. This
specification guarantees that the drive information will be transferred reliably even with high rate of
change of auxiliary em itter voltages (asymmetrical operation).
14) Dy namic v olta ges between auxiliary emitters of para llel connecte d drivers at turn-on and t urn -off le ad
to equa lizing curr ents over the X2 or X3 bus. The pe ak and RMS values of the re sulting curr ent must
be limited to the given value.
15) Undervoltage monitoring of the secondary-side supply voltage (Viso to Vee and Vee to COM which
correspond with the approximate turn-on and turn-off gate-emitter voltages). If the corresponding
voltage drops below this limit on 1SP033 5x2Mx (ma sters) , all para lleled IGBTs (master a nd slaves) are
switched off and a fault is transmitted to the status output. If the correspondi ng voltage drops be low
this limit on 1SP0335D2Sx (slaves), the corresponding IGBT is switched off. If the IGBT was turned
on, a fault will be generated by the gate-monitoring function on the master which will turn off all
paralleled IGBT after the corre sp onding delay.
16) The mean value VGE,mean of all gate voltages (master and all slaves) is filtered and compared to the
given values at turn-on and turn-off. If the specified values are exceeded (V GE,mean<VGE,on,min at turn-
on resp. VGE,mean>VGE,off,max at turn-off) after the given filter delay, the driver turns off all parallel-
connected IGBTs and a fault is transmitted to the status output.
17) A dynamic Vce protection is implemented on the driver. The maximum allowed Vce voltage at turn-on
is dynamically adjusted in order to better fit t o the IGBT characteristics at turn-on. At the end of the
turn-on process the given s tatic value applies.
18) The r esulting pulse widt h of the dire ct output of t he gate drive unit f or short-cir cuit type I (excl uding
the delay of the gate resistors) is the sum of the response time plus the dela y to IGBT turn-off.
19) The turn-off event of the IGBT is delayed by the specified time after the response time.
20) Including the delay of the external fiber-optic links (cable length: 1m). Measured from the transition
of the t urn-on or turn-o ff command at the optical transmitter on the host controller side to the direct
output of the gate drive unit (excluding the delay of the gat e resistors).
21) Output rise and fall times are measured between 10% and 90% of the nominal output swing. The
values are given for the driver side of the gate resistors with 2Ω/1uF load. The time constant of the
output load in conjunction with the present gate resistors leads to an additional delay at their load
side.
22) Delay of external fiber-optic links. Measured from the driver secondary side (ASIC output) to the
optical receiver on the host controller.
23) Measured on the host side. The fault status on the secondary side is automatically reset after the
specified time.
24) Including the delay of the external fiber-optic links. Measured from the transition of the turn-on or
turn-off command at the optical transmitter on the host controller side to the transition of the
acknowledge signal at the optical r eceiver on the host controller sid e.
25) The gate resistors can be leaded or surface mounted. CONCEPT reserves the right to determine which
type will be used. Typically, higher quantit ies will be produced with SM D resistors and sma ll quantities
with leaded resistors.
26) The driver s upply voltag e VDC is split into tw o distinct voltages on the driver. The first one is the turn-
on voltage which is regulated at about 15V. The difference between VDC and the turn-on voltage is
the turn-off voltage which is not regulated and mainly dependent on the d river input voltage VDC.
27) The fault status is set as long as the gate monitoring fault is present. The given value applies if the
driver goes from the “off state” to the “on state” and the gat e-emitter voltage of one or more parallel
connected drivers does not turn on. If the driver goes from the “on state” to the “off state” and the
gate-emitter voltage of one or more parallel connected drivers does not turn off, the fault status is
applied as long as the ga te monitoring fault is prese nt.
1SP0335x2xx-MBN1200H45E2-H
Prelim i nary Dat a Shee t
www.IGBT-Driver.com Page 7
Legal Disclaimer
This data sheet specifies devices but cannot promise to deliver any specific characteristics. No warranty or
guarantee is given – either expressly or implicitly – regarding delivery, performanc e or suitability.
CT-Concept Technologie AG reserves the right to make modifications to its technical data and product
specifications at any time without prior notice. The general terms and conditions of delivery of CT-Concept
Technologie AG apply.
1SP0335x2xx-MBN1200H45E2-H
Prelim i nary Dat a Shee t
www.IGBT-Driver.com Page 8
Ordering I nfo rmat io n
The general terms and conditions of delivery of CT-Concept Technologie AG apply.
Interface CONCEPT Driver Type # Related IGBT
Master, Fiber-Optic Interface 1) 1SP0335V2M1-MBN1200H45E2-H MBN1200H45E2-H
Master, Fiber-Optic Interface 2) 1SP0335S2M1-MBN1200H45E2-H MBN1200H45E2-H
Slave, Electrical Interface 1SP0335D2S1-MBN1200H45E2-H MBN1200H45E2-H
1) Fiber-optic interface with versatile link (HFBR-2522Z and HFBR-1522Z)
2) Fiber-optic interface with ST (HFBR-2412 Z and HFBR-1412Z)
See “De scri ption & App lication Manual for 1SP0335 SCALE-2 IGBT Drivers”
Product home page: www.IGBT-Driver.com/go/1SP0335
Refer to www.IGBT-Driver.com/go/nomenclature for information on driver nomencl ature
Information about Other Products
For other drivers, evaluation systems, product documentation and application support
Please click onto: www.IGBT-Driver.com
Manufacturer
CT-Concept Technologie AG
A Power Integrations Company
Johann-Renfer-Strasse 15
2504 Biel-Bienne
Switzerland
Phone +41 - 32 - 344 47 47
Fax +41 - 32 - 344 47 40
E-mail Info@IGBT-Driver.com
Internet www.IGBT-Driver.com
© 2010…2013 CT-Concept Tec hno logie AG - Switzerland. All rights reserved.
We reserve the right to make any technical modifications without prior notice. Version 1.0 from 2016-05-20
