Compact Photoelectric Sensor with Built-in Amplifier E3Z-F A Visible Spot That Simplifies the Usage of Photoelectric Sensors * E3Z-F is added to the E3Z Series of Photoelectric Sensors that boasts annual worldwide sales of 1.5 million units. * Many different sensing distances Diffuse-reflective: 100 mm, 300 mm, 500 mm, 1 m Through-beam: 20 m Retro-reflective: 4 m * Models with infrared LEDs are also available. For the most recent information on models that have been certified for safety standards, refer to your OMRON website. Refer to the Safety Precautions on page 9. Features Visible spot for easy installation Many different sensing distances are available, so you can select the best model for your application distance. Diffuse-reflective E3Z-FD@@1 E3Z-FD@@2 E3Z-FD@@3 100 mm 30 30 300 00 mm 500 mm E3Z-FD@@4 1m Application Materials handling: detect passing cardboard boxes Molding machines: detect falling molded objects 1 E3Z-F Ordering Information Sensors [Refer to Dimensions on page 10.] Sensing method Appearance Connecting method Red light Sensing distance Connector (M12) E3Z-FTN21 *1 Emitter E3Z-FTN21-L Receiver E3Z-FTN21-D E3Z-FTP21 *1 Emitter E3Z-FTP21-L Receiver E3Z-FTP21-D Pre-wired (2 m) E3Z-FTN12 2M *1 Emitter E3Z-FTN12-L 2M Receiver E3Z-FTN12-D 2M E3Z-FTP12 2M *1 Emitter E3Z-FTP12-L 2M Receiver E3Z-FTP12-D 2M E3Z-FTN22 *1 Emitter E3Z-FTN22-L Receiver E3Z-FTN22-D E3Z-FTP22 *1 Emitter E3Z-FTP22-L Receiver E3Z-FTP22-D E3Z-FRN11 2M E3Z-FRP11 2M E3Z-FRN21 E3Z-FRP21 E3Z-FDN11 2M E3Z-FDP11 2M E3Z-FDN21 E3Z-FDP21 E3Z-FDN12 2M E3Z-FDP12 2M E3Z-FDN22 E3Z-FDP22 E3Z-FDN13 2M E3Z-FDP13 2M 20 m Connector (M12) Pre-wired (2 m) 4 m *3 *2 (100 mm) Connector (M12) Pre-wired (2 m) Connector (M12) 100 mm Pre-wired (2 m) Connector (M12) 300 mm Pre-wired (2 m) Connector (M12) 500 mm Pre-wired (2 m) Diffusereflective PNP output E3Z-FTP11 2M *1 Emitter E3Z-FTP11-L 2M Receiver E3Z-FTP11-D 2M 20 m Retro-reflective with MSR function Model NPN output E3Z-FTN11 2M *1 Emitter E3Z-FTN11-L 2M Receiver E3Z-FTN11-D 2M Pre-wired (2 m) Through-beam (Emitter + Receiver) Infrared light Connector (M12) 1m Pre-wired (2 m) Connector (M12) 100 mm Pre-wired (2 m) Connector (M12) 300 mm Pre-wired (2 m) Connector (M12) 500 mm Pre-wired (2 m) Connector (M12) 1m E3Z-FDN23 E3Z-FDP23 E3Z-FDN14 2M E3Z-FDP14 2M E3Z-FDN24 E3Z-FDP24 E3Z-FDN15 2M E3Z-FDP15 2M E3Z-FDN25 E3Z-FDP25 E3Z-FDN16 2M E3Z-FDP16 2M E3Z-FDN26 E3Z-FDP26 E3Z-FDN17 2M E3Z-FDP17 2M E3Z-FDN27 E3Z-FDP27 E3Z-FDN18 2M E3Z-FDP18 2M E3Z-FDN28 E3Z-FDP28 *1. Through-beam Sensors are normally sold in sets that include both the Emitter and Receiver. An order for the Emitter or Receiver alone cannot be accepted. *2. The Reflector is sold separately. Select the Reflector model most suited to the application. *3. Values in parentheses indicate the minimum required distance between the Sensor and Reflector. 2 E3Z-F Accessories (Sold Separately) Reflector (Required for Retro-reflective Sensors) A Reflector is not provided with the Sensor. It must be ordered separately. [Refer to Dimensions on page 11.] Appearance Sensing distance* Rated value Reference value 4 m (100 mm) --- Model Quantity Remarks E39-R1S 1 for E3Z-FR@ * Values in parentheses indicates the minimum required distance between the Sensor and Reflector. Mounting Brackets A Mounting Bracket is not provided with the Sensor. It must be ordered separately as required. [Refer to Dimensions on page 11.] Applicable Sensors Mounting method Appearance Model Quantity M3 screw mounting E39-L189 1 M18 nut side mounting E39-L183 1 All models Note: 1. When using Through-beam models, order one bracket for the Receiver and one for the Emitter. Sensor I/O Connectors (Sockets on One Cable End) (Required for models for Connectors) A Connector is not provided with the Sensor. It must be ordered separately. Applicable Sensors Size Cable Appearance Straight Cable type 2m XS2F-M12PVC4S2M 5m Connector (M12) M12 Standard Model XS2F-M12PVC4S5M 4 conductors L-shaped 2m XS2F-M12PVC4A2M 5m XS2F-M12PVC4A5M Note: When using Through-beam models, order one sensor I/O connector for the Receiver and one for the Emitter. 3 E3Z-F Ratings and Specifications Sensing method Through-beam Retro-reflective with MSR function NPN output Pre-wired E3Z-FTN11 E3Z-FRN11 E3Z-FDN11 E3Z-FDN12 E3Z-FDN13 E3Z-FDN14 Connector (M12) E3Z-FTN21 E3Z-FRN21 E3Z-FDN21 E3Z-FDN22 E3Z-FDN23 E3Z-FDN24 PNP output Pre-wired E3Z-FTP11 E3Z-FRP11 E3Z-FDP11 E3Z-FDP12 E3Z-FDP13 E3Z-FDP14 Connector (M12) E3Z-FTP21 E3Z-FRP21 E3Z-FDP21 E3Z-FDP22 E3Z-FDP23 E3Z-FDP24 100 mm (white paper: 300 x 300 mm) 300 mm (white paper: 300 x 300 mm) 500 mm (white paper: 300 x 300 mm) 1m (white paper: 300 x 300 mm) 40 x 45 mm (at sensing distance of 100 mm) 40 x 50 mm (at sensing distance of 300 mm) 45 x 50 mm (at sensing distance of 500 mm) 120 x 150 mm (at sensing distance of 1 m) Model Item Diffuse-reflective Sensing distance Spot diameter (reference value) Standard sensing object 4 m (100 mm) *1 (when using E39-R1S) 20 m --Opaque: 7 mm dia. min. Differential travel Opaque: 75 mm dia. min. --- --20% max. of sensing distance Directional angle 2 min. Light source (wavelength) Red LED (624 nm) Power supply voltage 10 to 30 VDC (including voltage ripple of 10% (p-p) max.) Current consumption 40 mA max. (Emitter: 25 mA max., Receiver: 15 mA max.) Control output Load power supply voltage: 30 VDC max., Load current: 100 mA max. (Residual voltage: 3 V max.) Open collector output (NPN (negative common)/PNP (positive common) depending on model) Light-ON/Dark-ON cable connection selectable Indicators Operation indicator (orange) Stability indicator (green) Trough-beam Emitter has only power indicator (green). Protection circuits Power supply reverse polarity protection, Output short-circuit protection, and Output reverse polarity protection Response time Operate or reset: 0.5 ms max. Sensitivity adjustment One-turn adjuster Ambient illumination (Receiver side) Incandescent lamp: 3,000 lx max. Sunlight: 10,000 lx max. Ambient temperature range Operating: -25 to 55C, Storage: -40C to 70C (with no icing or condensation) Ambient humidity range Operating: 35% to 85%, Storage: 35% to 95% (with no condensation) Insulation resistance 20 M min. (at 500 VDC) Dielectric strength 1,000 VAC, at 50/60 Hz for 1 min Vibration resistance (destruction) 10 to 55 Hz with a 1.5 mm double amplitude for 2 hours each in X, Y, and Z directions --- 25 mA max. Shock resistance (destruction) 500 m/s2 for 3 times each in X, Y, and Z directions Degree of protection *2 IEC IP67, DIN40050-9 standard IP69K Connecting method Pre-wired (standard length: 2 m), Connector (M12, 4-Pin) Pre-wired Weight (packedstate/ Sensor only) Connector Materials Approx. 70 g/ Approx. 55 g Approx. 35 g/ Approx. 20 g Approx. 25 g/ Approx. 10 g Case ABS Lens Display Methacrylic resin (PMMA) Methacrylic resin (PMMA) Sensitivity adjuster Polyacetal (POM) Cable *3 Vinyl chloride (PVC) Nuts Accessories Approx. 120 g/ Approx. 105 g ABS Nuts (2 pcs), Nut (1 pcs), Instruction manual Instruction manual *1. Values in parentheses indicate the minimum required distances between the Sensors and Reflectors. *2. IP69K Degree of Protection Specifications. IP69K is a protection specification stipulated by DIN 40050 Part 9 of the German standards. The test item is sprayed with 80C water from a nozzle of a specified shape at a water pressure of 80 to 100 bar. The amount of water is 14 to 16 liters per munute. The distance between the test item and the nozzle is 10 to 15 cm. The water is discharged at angles of 0, 30, 60, and 90 from the horizontal plane for 30 seconds at each angle while the test item is rotated horizontally. *3. Only for Pre-wired models. 4 E3Z-F NPN output PNP output Sensing method Through-beam Pre-wired E3Z-FTN12 E3Z-FDN15 E3Z-FDN16 E3Z-FDN17 E3Z-FDN18 Connector (M12) E3Z-FTN22 E3Z-FDN25 E3Z-FDN26 E3Z-FDN27 E3Z-FDN28 Pre-wired E3Z-FTP12 E3Z-FDP15 E3Z-FDP16 E3Z-FDP17 E3Z-FDP18 Connector (M12) E3Z-FTP22 E3Z-FDP25 E3Z-FDP26 E3Z-FDP27 E3Z-FDP28 Model Item Sensing distance Diffuse-reflective 100 mm (white paper: 300 x 300 mm) 20 m 300 mm (white paper: 300 x 300 mm) Spot diameter (reference value) Standard sensing object 500 mm (white paper: 300 x 300 mm) 1m (white paper: 300 x 300 mm) --Opaque: 7 mm dia. min. Differential travel --- --20% max. of sensing distance Directional angle 2 min. Light source (wavelength) Infrared LED ( 850 nm) --- Power supply voltage 10 to 30 VDC (including voltage ripple of 10% (p-p) max.) Current consumption 40 mA max. (Emitter: 25 mA max., 25mA max. Receiver:15 mA max.) Control output Load power supply voltage: 30 VDC max., Load current: 100 mA max. (Residual voltage: 3 V max.) Open collector output (NPN (negative common)/PNP (positive common) depending on model) Light-ON/Dark-ON cable connection selectable Indicators Operation indicator (orange) Stability indicator (green) Trough-beam Emitter has only power indicator (green). Protection circuits Power supply reverse polarity protection, Output short-circuit protection, and Output reverse polarity protection Response time Operate or reset: 0.5 ms max. Sensitivity adjustment One-turn adjuster Ambient illumination (Receiver side) Incandescent lamp: 3,000 lx max. Sunlight: 10,000 lx max. Ambient temperature range Operating: -25 to 55C, Storage: -40C to 70C (with no icing or condensation) Ambient humidity range Operating: 35% to 85%, Storage: 35% to 95% (with no condensation) Insulation resistance 20 M min. (at 500 VDC) Dielectric strength 1,000 VAC, at 50/60 Hz for 1 min Vibration resistance (destruction) 10 to 55 Hz with a 1.5 mm double amplitude for 2 hours each in X, Y, and Z directions Shock resistance (destruction) 500 m/s2 for 3 times each in X, Y, and Z directions Degree of protection *1 IEC IP67, DIN40050-9 standard IP69K Connecting method Pre-wired Weight (packedstate/ Sensor only) Connector Materials Accessories Pre-wired (standard length: 2 m), Connector (M12, 4-Pin) Approx. 120 g/ Approx. 105 g Approx. 70 g/ Approx. 55 g Approx. 35 g/ Approx. 20 g Approx. 25 g/ Approx. 10 g Case ABS Lens Display Methacrylic resin (PMMA) Sensitivity adjuster Polyacetal (POM) Methacrylic resin (PMMA) Cable *2 Vinyl chloride (PVC) Nuts ABS Nuts (2 pcs), Instruction manual Nut (1 pcs), Instruction manual *1. IP69K Degree of Protection Specifications. IP69K is a protection specification stipulated by DIN 40050 Part 9 of the German standards. The test item is sprayed with 80C water from a nozzle of a specified shape at a water pressure of 80 to 100 bar. The amount of water is 14 to 16 liters per munute. The distance between the test item and the nozzle is 10 to 15 cm. The water is discharged at angles of 0, 30, 60, and 90 from the horizontal plane for 30 seconds at each angle while the test item is rotated horizontally. *2. Only for Pre-wired models. 5 E3Z-F Engineering Data (Reference Value) 1000 Retro-reflective E3Z-FR@ E3Z-FT@@1 800 600 E3Z-FT@@2 400 Distance Y (mm) Distance Y (mm) Parallel Operating Range Through-beam E3Z-FT@@1/-FT@@2 200 Reflector: E39-R1S Y 150 X 100 50 200 0 0 Y -200 -50 X -400 -100 -600 -150 -1000 0 5 10 15 20 25 Operating Range Diffuse-reflective E3Z-FD@@1/-FD@@2 Sensing object: white paper 20 E3Z-FD@@1 10 2 4 6 8 Distance X (m) Diffuse-reflective E3Z-FD@@3/-FD@@4 Distance Y (mm) Distance Y (mm) 30 -200 0 30 35 40 Distance X (m) 100 Diffuse-reflective E3Z-FD@@5/-FD@@6 Sensing object: 300 x 300 mm white paper 80 60 E3Z-FD@@4 40 Distance Y (mm) -800 30 20 E3Z-FD@@5 E3Z-FD@@6 10 E3Z-FD@@2 20 0 0 0 -20 -10 -10 -40 -60 Y -20 Y E3Z-FD@@3 Y -20 -80 X -30 0 100 200 300 -100 0 400 500 600 Distance X (mm) X X 200 400 600 800 1000 1200 1400 1600 1800 Distance X (mm) Distance Y (mm) Diffuse-reflective E3Z-FD@@7/-FD@@8 100 Sensing object: 300 x 300 mm white paper 80 E3Z-FD@@8 60 40 20 0 -20 -40 -60 E3Z-FD@@7 Y -80 X -100 0 200 400 600 800 1000 1200 1400 1600 1800 Distance X (mm) Retro-reflective E3Z-FR@@ 100 70 50 Excess gain ratio Excess gain ratio Excess Gain vs. Distance Through-beam E3Z-FT@@1/-FT@@2 30 10 7 5 30 3 3 Operating 1 level Operating 1 level 0.7 0.5 E3Z-FT@@2 0.3 0.3 0.1 Reflector: E39-R1S 10 7 5 E3Z-FT@@1 0.7 0.5 6 100 70 50 0 10 20 30 40 50 60 70 Distance (m) 0.1 0 2 4 6 8 10 Distance (m) -30 0 100 200 300 400 500 600 Distance X (mm) E3Z-F Diffuse-reflective E3Z-FD@@3/-FD@@4 100 70 Sensing object: 100 x 100 mm white paper 50 30 Diffuse-reflective E3Z-FD@@5/-FD@@6 100 70 Sensing object: 300 x 300 mm white paper 50 Excess gain ratio Excess gain ratio Excess gain ratio Excess Gain vs. Distance Diffuse-reflective E3Z-FD@@1/-FD@@2 30 E3Z-FD@@2 3 Operating 1 level 3 3 E3Z-FD@@4 E3Z-FD@@3 Operating 1 level E3Z-FD@@1 0.7 0.5 30 10 7 5 10 7 5 10 7 5 100 70 Sensing object: 300 x 300 mm white paper 50 0.7 0.5 0.7 0.5 0.3 0.3 0.3 0.1 0.1 0.1 0 200 400 600 800 1000 Distance (mm) E3Z-FD@@6 Operating 1 level 0 0.5 1 1.5 2 2.5 3 Distance (m) E3Z-FD@@5 0 200 400 600 800 1000 Distance (mm) Excess gain ratio Diffuse-reflective E3Z-FD@@7/-FD@@8 100 70 Sensing object: 300 x 300 mm white paper 50 30 10 7 5 3 E3Z-FD@@8 Operating 1 level 0.7 0.5 E3Z-FD@@7 0.3 0.5 1 1.5 2 2.5 3 Distance (m) 700 Diffuse-reflective E3Z-FD@@3/-FD@@4 Distance (mm) Distance (mm) Sensing Object Size vs. Distance Diffuse-reflective E3Z-FD@@1/-FD@@2 Sensing object: white paper 600 500 2000 Diffuse-reflective E3Z-FD@@5/-FD@@6 Distance (mm) 0.1 0 Sensing object: white paper 1800 1600 E3Z-FD@@4 400 1200 d 300 400 E3Z-FD@@3 600 400 d 200 50 100 150 200 250 300 Side length (one side) of sensing object: d (mm) d E3Z-FD@@5 200 100 0 0 d 300 800 E3Z-FD@@1 0 0 E3Z-FD@@6 1000 d 200 Sensing object: white paper 600 500 1400 E3Z-FD@@2 700 100 d 50 100 150 200 250 300 350 400 450 500 Side length (one side) of sensing object: d (mm) 0 0 50 100 150 200 250 300 Side length (one side) of sensing object: d (mm) Distance (mm) Diffuse-reflective E3Z-FD@@7/-FD@@8 2000 Sensing object: white paper 1800 1600 1400 E3Z-FD@@8 1200 1000 800 600 E3Z-FD@@7 400 d 200 0 0 d 50 100 150 200 250 300 350 400 450 500 Side length (one side) of sensing object: d (mm) 7 E3Z-F I/O Circuit Diagrams NPN Output Model Operation mode Timing charts Operation selector Incident light Light-ON Through-beam Receivers, Retro-reflective, Diffuse-reflective. No incident light Operation ON indicator OFF (orange) ON Output transistor OFF Operate Load (e.g., relay) Reset (Between brown (1) and black (4) leads) E3Z-FTN@@ E3Z-FRN@@ E3Z-FDN@@ Dark-ON Incident light No incident light Operation ON indicator OFF (orange) ON Output transistor OFF Operate Load (e.g., relay) Reset (Between brown (1) and black (4) leads) Through-beam Emitter Output circuit Power indicator (Green) Connect pink lead (2) to brown lead (1) or leave open. 10 to 30 VDC Brown Stability indicator (Green) Operation indicator (Orange) Photoelectric Sensor main circuit 1 Light-ON (Control output) Load (Relay) Black 100 mA max. 4 3 Connect pink lead (2) to blue lead (3). Blue 0V Dark-ON Pink 2 Brown 1 Photoelectric Sensor main circuit 10 to 30 VDC Blue 3 PNP Output Model Operation mode Light-ON Timing charts Incident light No incident light Operation ON indicator OFF (orange) ON Output transistor OFF Operate Load (e.g., relay) Reset Operation selector Output circuit Through-beam Receivers, Retro-reflective, Diffuse-reflective. Connect pink lead (2) to brown lead (1). E3Z-FTP@@ E3Z-FRP@@ E3Z-FDP@@ Dark-ON Through-beam Emitter Power indicator (Green) 1 Stability indicator (Green) Photoelectric Sensor main circuit (Between blue (3) and black (4) leads) Incident light No incident light Operation ON indicator OFF (orange) ON Output transistor OFF Operate Load (e.g., relay) Reset (Between blue (3) and black (4) leads) 10 to 30 VDC Brown Operation indicator (Orange) Light-ON Black (Control output) 3 Connect pink lead (2) to blue lead (3) or leave open. 2 0V Dark-ON Pink Brown 10 to 30 VDC 3 Blue Connector Pin Arrangement Plugs (Sensor I/O Connectors) M12 Connector Pin Arrangement M12, 4-pin Connectors Pin No. Wire color 1 2 4 3 Load (Relay) Blue 1 Photoelectric Sensor main circuit 2 1 3 4 Brown White Blue Black 1 2 3 4 Pin arrangement Classification DC 8 100 mA max. 4 Wire color Connector pin No. Application Brown 1 Power supply (+V) White 2 L/on * D/on selectable Blue 3 Power supply (0 V) Black 4 Output E3Z-F Safety Precautions To ensure safe operation, be sure to read and follow the Instruction Manual provided with the sensor. Meanings of Alert symbols WARNING Indicates a potentially hazardous situation which, if not avoided, will result in minor or moderate injury, or may result in serious injury or death. Additionally there may be significant property damage. CAUTION Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury or in property damage. Precautions for Safe Use Supplementary comments on what to do or avoid doing, to use the product safety. Precautions for Correct Use Supplementary comments on what to do or avoid doing, to prevent a failure to operate, or undesirable effect on product performance. WARNING This product is not designed or rated for ensuring safety of persons either directly or indirectly. Do not use it for such purposes. Precautions for Correct Use 1. Laying Sensor wiring in the same conduit or duct as highvoltage wires or power lines may result in malfunction or damage due to conduit or use shielded cable. Separate the Sensor wiring or use a shielded cable. 2. Do not pull on the cable with excessive force. 3. If a commercial switching regulator is used, ground the FG (frame ground) terminal. 4. The sensor will be available 100 ms after the power supply is tuned ON. Start to use the sensor 100 ms or more after turning ON the power supply. If the load and the sensor are connected to separate power supplies, be sure to turn ON the sensor first. 5. Output pulses may be generated even when the power supply is OFF. Therefore, it is recommended to first turn OFF the power supply for the load or the load line. 6. Do not tighten nuts or screws with excessive force. To secure the Sensor with nuts, use the nuts that are included with the Sensor, and tighten the nuts to a torque of 0.3 to 0.4 N*m (2.0 N*m max.). To secure the Sensor with M3 screws, tighten the screws to a torque of 0.6 N*m max.. CAUTION Explosion, fire, or product malfunction may occur. Never use the product with an AC power supply. Do not use the product with voltage in excess of the rated voltage. Do not use the product with incorrect wiring. Precautions for Safe Use Be sure to follow the safety precautions below for added safety. 1. Do not use the product in atmospheres or environments that exceed product ratings. 2. Do not use the product in an environment where it may be exposed to inflammable or explosive gas. 3. Do not use the product in an environment where it may be exposed to oil or chemicals. 4. Do not use the product in water, in rain, or outdoors. 5. Do not use the product in locations subject to condensation due to high humidity. 6. Do not use the product in any other environment that exceeds the ratings. 7. Do not use the product in a location subject to direct sunlight. 8. Do not use the product in a location subject to direct vibration or shock. 9. Do not use organic solvents (such as thinners or alcohol). 10.Do not attempt to disassemble, repair, or modify the product. 11.Dispose of the product as industrial waste. 12.The E3Z-F devices shall be used with Class2 power supply in the United States. The ampere rating of the current protection shall be 1A for 26AWG, 2A for 24AWG, 3A for 22AWG, 5A for 20AWG. 9 E3Z-F (Unit: mm) Dimensions Tolerance class IT16 applies to dimensions in this data sheet unless otherwise specified. Sensors Pre-wired E3Z-FT@1@ E3Z-FR@11 E3Z-FD@1@ M18x7.2 P=1 Sensitivity adjuster 6.7 dia. 15 7.4 Stability indicator (green) 5.7 Operation Indicator (orange) 19.8 27 31 13.9 10 Receiver 7 0.8 2 Optical axis Mounting Hole 18.5 dia. Optical axis 35 24.1 16.6 dia. 17.5 17.5 +0.5 0 12.05 Emitter 5.45 Two, 3.3 dia. 3.4 Two, 3.3 dia. Applicable models: E3Z-FR@11 E3Z-FD@1@ Applicable models: E3Z-FT@1@ 21 24.1 Applicable models: E3Z-FT@1@-D E3Z-FR@11 E3Z-FD@1@ Connector (M12) E3Z-FT@2@ E3Z-FR@21 E3Z-FD@2@ Vinyl insurated round cable 4 dia. 4 conductors (Conductor cross section:0.128 mm2 (AWG26)/ Insulator diameter: 0.85 mm), Standard length: 2 m Minimum bending radius: 12 mm M18x7.2 P=1 Sensitivity adjuster 6.7 dia. 15 7.4 Stability indicator (green) 19.8 27 5.7 Operation Indicator (orange) 31 13.9 10 2 0.8 Receiver Optical axis 7 Mounting Hole Optical axis 18.5 dia. 35 24.1 16.6 dia. 17.5 17.5 +0.5 0 12.05 Emitter 5.45 Applicable models: E3Z-FT@2@ Applicable models: E3Z-FR@21 E3Z-FD@2@ M12x4 P=1 21 2 3 24.1 1 4 Applicable models: E3Z-FT@2@-D E3Z-FR@21 E3Z-FD@2@ 10 Two, 3.3 dia. 11.6 Two, 3.3 dia. Terminal No. Specifications 1 +V 2 L/on * D/on selectable 3 0V 4 Output E3Z-F Tightening Nuts 8 24 dia. 3-22 Material: ABS M18 x 7.5 P=1 Accessories (Sold Separately) Reflector E39-R1S Mounting Brackets E39-L189 40.3 34 Two, 3.5 dia. 7.5 7 2-20 4R 15 16 2. 0. R1 259.9 ia. 2.5 5d 52 3.0 2-20 5 .52 R1 8 45.5 2.7 1.6 Material: <Reflective surface> Acrylic <Rear surface> ABS R3 30 31.8 Mounting Brackets E39-L183 20.1 42 4.3 22 2-R15 2-30 2-4.3 37 15 1.5 (R16.5) 90 18.2 dia. 36.5 20 11 E3Z-F Compact Photoelectric Sensor with Built-in Amplifier E3Z The Standard for Photoelectric Sensors with a Secure Track Record of 1.5 Million Sold Yearly. * Long sensing distance of 30 m for Through-beam Models, 4 m for Retro-reflective Models, and 1 m for Diffuse-reflective Models. * Mechanical axis and optical axis offset of less than 2.5 simplifies optical axis adjustment. * High stability with unique algorithm that prevents interference of external light. Compact Laser Photoelectric Sensor with Built-in Amplifier E3Z-LT/LR/LL Compact and Reliable Laser Photoelectric Sensor * Safety and reliability with laser class 1 (JIS and IEC). * Product lineup includes models with distance setting without influence of color. * Maximum ambient operating temperature of 55C and waterproof construction (IP67) in E3Z class. Grooved-type Photoelectric Sensor with Built-in Amplifier E3Z-G Photoelectric Sensor with Grooved Design and Easy Settings * Grooved-type Sensor with groove width of 25 mm. * Models are available with one or two light axes. * Models are available with M8 pre-wired connectors. 12 E3Z-F Compact Photoelectric Sensor with Stainless Steel Housing E3ZM Stainless Steel Housing Ideal for Food Industry (SUS316L) * Strong resistance against detergents, disinfectants, and jet liquid flow. * Product lineup includes BGS reflective models and through-beam models with built-in slits. * Certified by Ecolab Europe. Color Mark Detection Compact Photoelectric Sensor E3ZM-V Industry's Smallest Color Mark Sensor * Excellent space savings. (Reduced by 90% compared with previous OMRON models.) * Improved color-difference discrimination with white LED and RGB signal processing. * Equipped with two types of teaching: (2-point teaching and automatic teaching.) Transparent Object (PET Bottle) Detection Compact Photoelectric Sensor E3ZM-B Excellent PET Bottle Detection * New detection method that is independent of bottle shape, position, and contents. * Automatic compensation against effects of contamination and temperature (except E3ZM-B@T). * Product lineup includes models with adjuster (E3ZM-B@T). * Detects transparent objects made by PET, resin, or glass. Oil-resistant, Robust, Compact Photoelectric Sensor E3ZM-C Photoelectric Sensor for the Automotive and Machine Tool Industries * Oil-resistant, rugged body made of stainless steel. * Spot visibility improved to as far as 1 m away. Product lineup includes through-beam models with orange spot. * Product lineup includes M12 Smartclick pre-wired connector models. 13 Terms and Conditions of Sale 1. Offer; Acceptance. These terms and conditions (these "Terms") are deemed part of all quotes, agreements, purchase orders, acknowledgments, price lists, catalogs, manuals, brochures and other documents, whether electronic or in writing, relating to the sale of products or services (collectively, the "Products") by Omron Electronics LLC and its subsidiary companies ("Omron"). Omron objects to any terms or conditions proposed in Buyer's purchase order or other documents which are inconsistent with, or in addition to, these Terms. 2. Prices; Payment Terms. All prices stated are current, subject to change without notice by Omron. Omron reserves the right to increase or decrease prices on any unshipped portions of outstanding orders. Payments for Products are due net 30 days unless otherwise stated in the invoice. 3. Discounts. Cash discounts, if any, will apply only on the net amount of invoices sent to Buyer after deducting transportation charges, taxes and duties, and will be allowed only if (i) the invoice is paid according to Omron's payment terms and (ii) Buyer has no past due amounts. 4. Interest. Omron, at its option, may charge Buyer 1-1/2% interest per month or the maximum legal rate, whichever is less, on any balance not paid within the stated terms. 5. Orders. Omron will accept no order less than $200 net billing. 6. Governmental Approvals. Buyer shall be responsible for, and shall bear all costs involved in, obtaining any government approvals required for the importation or sale of the Products. 7. Taxes. All taxes, duties and other governmental charges (other than general real property and income taxes), including any interest or penalties thereon, imposed directly or indirectly on Omron or required to be collected directly or indirectly by Omron for the manufacture, production, sale, delivery, importation, consumption or use of the Products sold hereunder (including customs duties and sales, excise, use, turnover and license taxes) shall be charged to and remitted by Buyer to Omron. 8. Financial. If the financial position of Buyer at any time becomes unsatisfactory to Omron, Omron reserves the right to stop shipments or require satisfactory security or payment in advance. If Buyer fails to make payment or otherwise comply with these Terms or any related agreement, Omron may (without liability and in addition to other remedies) cancel any unshipped portion of Products sold hereunder and stop any Products in transit until Buyer pays all amounts, including amounts payable hereunder, whether or not then due, which are owing to it by Buyer. Buyer shall in any event remain liable for all unpaid accounts. 9. Cancellation; Etc. Orders are not subject to rescheduling or cancellation unless Buyer indemnifies Omron against all related costs or expenses. 10. Force Majeure. Omron shall not be liable for any delay or failure in delivery resulting from causes beyond its control, including earthquakes, fires, floods, strikes or other labor disputes, shortage of labor or materials, accidents to machinery, acts of sabotage, riots, delay in or lack of transportation or the requirements of any government authority. 11. Shipping; Delivery. Unless otherwise expressly agreed in writing by Omron: a. Shipments shall be by a carrier selected by Omron; Omron will not drop ship except in "break down" situations. b. Such carrier shall act as the agent of Buyer and delivery to such carrier shall constitute delivery to Buyer; c. All sales and shipments of Products shall be FOB shipping point (unless otherwise stated in writing by Omron), at which point title and risk of loss shall pass from Omron to Buyer; provided that Omron shall retain a security interest in the Products until the full purchase price is paid; d. Delivery and shipping dates are estimates only; and e. Omron will package Products as it deems proper for protection against normal handling and extra charges apply to special conditions. 12. Claims. Any claim by Buyer against Omron for shortage or damage to the Products occurring before delivery to the carrier must be presented in writing to Omron within 30 days of receipt of shipment and include the original transportation bill signed by the carrier noting that the carrier received the Products from Omron in the condition claimed. 13. Warranties. (a) Exclusive Warranty. Omron's exclusive warranty is that the Products will be free from defects in materials and workmanship for a period of twelve months from the date of sale by Omron (or such other period expressed in writing by Omron). Omron disclaims all other warranties, express or implied. (b) Limitations. OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, ABOUT NON-INFRINGEMENT, MERCHANTABIL- 14. 15. 16. 17. 18. ITY OR FITNESS FOR A PARTICULAR PURPOSE OF THE PRODUCTS. BUYER ACKNOWLEDGES THAT IT ALONE HAS DETERMINED THAT THE PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR INTENDED USE. Omron further disclaims all warranties and responsibility of any type for claims or expenses based on infringement by the Products or otherwise of any intellectual property right. (c) Buyer Remedy. Omron's sole obligation hereunder shall be, at Omron's election, to (i) replace (in the form originally shipped with Buyer responsible for labor charges for removal or replacement thereof) the non-complying Product, (ii) repair the non-complying Product, or (iii) repay or credit Buyer an amount equal to the purchase price of the non-complying Product; provided that in no event shall Omron be responsible for warranty, repair, indemnity or any other claims or expenses regarding the Products unless Omron's analysis confirms that the Products were properly handled, stored, installed and maintained and not subject to contamination, abuse, misuse or inappropriate modification. Return of any Products by Buyer must be approved in writing by Omron before shipment. Omron Companies shall not be liable for the suitability or unsuitability or the results from the use of Products in combination with any electrical or electronic components, circuits, system assemblies or any other materials or substances or environments. Any advice, recommendations or information given orally or in writing, are not to be construed as an amendment or addition to the above warranty. See http://www.omron247.com or contact your Omron representative for published information. Limitation on Liability; Etc. OMRON COMPANIES SHALL NOT BE LIABLE FOR SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY WAY CONNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED IN CONTRACT, WARRANTY, NEGLIGENCE OR STRICT LIABILITY. Further, in no event shall liability of Omron Companies exceed the individual price of the Product on which liability is asserted. Indemnities. Buyer shall indemnify and hold harmless Omron Companies and their employees from and against all liabilities, losses, claims, costs and expenses (including attorney's fees and expenses) related to any claim, investigation, litigation or proceeding (whether or not Omron is a party) which arises or is alleged to arise from Buyer's acts or omissions under these Terms or in any way with respect to the Products. Without limiting the foregoing, Buyer (at its own expense) shall indemnify and hold harmless Omron and defend or settle any action brought against such Companies to the extent based on a claim that any Product made to Buyer specifications infringed intellectual property rights of another party. Property; Confidentiality. Any intellectual property in the Products is the exclusive property of Omron Companies and Buyer shall not attempt to duplicate it in any way without the written permission of Omron. Notwithstanding any charges to Buyer for engineering or tooling, all engineering and tooling shall remain the exclusive property of Omron. All information and materials supplied by Omron to Buyer relating to the Products are confidential and proprietary, and Buyer shall limit distribution thereof to its trusted employees and strictly prevent disclosure to any third party. Export Controls. Buyer shall comply with all applicable laws, regulations and licenses regarding (i) export of products or information; (iii) sale of products to "forbidden" or other proscribed persons; and (ii) disclosure to non-citizens of regulated technology or information. Miscellaneous. (a) Waiver. No failure or delay by Omron in exercising any right and no course of dealing between Buyer and Omron shall operate as a waiver of rights by Omron. (b) Assignment. Buyer may not assign its rights hereunder without Omron's written consent. (c) Law. These Terms are governed by the law of the jurisdiction of the home office of the Omron company from which Buyer is purchasing the Products (without regard to conflict of law principles). (d) Amendment. These Terms constitute the entire agreement between Buyer and Omron relating to the Products, and no provision may be changed or waived unless in writing signed by the parties. (e) Severability. If any provision hereof is rendered ineffective or invalid, such provision shall not invalidate any other provision. (f) Setoff. Buyer shall have no right to set off any amounts against the amount owing in respect of this invoice. (g) Definitions. As used herein, "including" means "including without limitation"; and "Omron Companies" (or similar words) mean Omron Corporation and any direct or indirect subsidiary or affiliate thereof. Certain Precautions on Specifications and Use 1. Suitability of Use. Omron Companies shall not be responsible for conformity with any standards, codes or regulations which apply to the combination of the Product in the Buyer's application or use of the Product. At Buyer's request, Omron will provide applicable third party certification documents identifying ratings and limitations of use which apply to the Product. This information by itself is not sufficient for a complete determination of the suitability of the Product in combination with the end product, machine, system, or other application or use. Buyer shall be solely responsible for determining appropriateness of the particular Product with respect to Buyer's application, product or system. Buyer shall take application responsibility in all cases but the following is a non-exhaustive list of applications for which particular attention must be given: (i) Outdoor use, uses involving potential chemical contamination or electrical interference, or conditions or uses not described in this document. (ii) Use in consumer products or any use in significant quantities. (iii) Energy control systems, combustion systems, railroad systems, aviation systems, medical equipment, amusement machines, vehicles, safety equipment, and installations subject to separate industry or government regulations. (iv) Systems, machines and equipment that could present a risk to life or property. Please know and observe all prohibitions of use applicable to this Product. NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY OR IN LARGE QUANTITIES WITHOUT ENSURING THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO 2. 3. 4. 5. ADDRESS THE RISKS, AND THAT THE OMRON'S PRODUCT IS PROPERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM. Programmable Products. Omron Companies shall not be responsible for the user's programming of a programmable Product, or any consequence thereof. Performance Data. Data presented in Omron Company websites, catalogs and other materials is provided as a guide for the user in determining suitability and does not constitute a warranty. It may represent the result of Omron's test conditions, and the user must correlate it to actual application requirements. Actual performance is subject to the Omron's Warranty and Limitations of Liability. Change in Specifications. Product specifications and accessories may be changed at any time based on improvements and other reasons. It is our practice to change part numbers when published ratings or features are changed, or when significant construction changes are made. However, some specifications of the Product may be changed without any notice. When in doubt, special part numbers may be assigned to fix or establish key specifications for your application. Please consult with your Omron's representative at any time to confirm actual specifications of purchased Product. Errors and Omissions. Information presented by Omron Companies has been checked and is believed to be accurate; however, no responsibility is assumed for clerical, typographical or proofreading errors or omissions. OMRON AUTOMATION AND SAFETY * THE AMERICAS HEADQUARTERS * Chicago, IL USA * 847.843.7900 * 800.556.6766 * www.omron247.com OMRON CANADA, INC. * HEAD OFFICE Toronto, ON, Canada * 416.286.6465 * 866.986.6766 * www.omron247.com OMRON ARGENTINA * SALES OFFICE Cono Sur * 54.11.4783.5300 OMRON ELECTRONICS DE MEXICO * HEAD OFFICE Mexico DF * 52.55.59.01.43.00 * 01-800-226-6766 * mela@omron.com OMRON CHILE * SALES OFFICE Santiago * 56.9.9917.3920 OMRON ELECTRONICS DE MEXICO * SALES OFFICE Apodaca, N.L. * 52.81.11.56.99.20 * 01-800-226-6766 * mela@omron.com OTHER OMRON LATIN AMERICA SALES 54.11.4783.5300 OMRON ELETRONICA DO BRASIL LTDA * HEAD OFFICE Sao Paulo, SP, Brasil * 55.11.2101.6300 * www.omron.com.br OMRON EUROPE B.V. * Wegalaan 67-69, NL-2132 JD, Hoofddorp, The Netherlands. * +31 (0) 23 568 13 00 * www.industrial.omron.eu Authorized Distributor: Automation Control Systems * Machine Automation Controllers (MAC) * Programmable Controllers (PLC) * Operator interfaces (HMI) * Distributed I/O * Software Drives & Motion Controls * Servo & AC Drives * Motion Controllers & Encoders Temperature & Process Controllers * Single and Multi-loop Controllers Sensors & Vision * Proximity Sensors * Photoelectric Sensors * Fiber-Optic Sensors * Amplified Photomicrosensors * Measurement Sensors * Ultrasonic Sensors * Vision Sensors Industrial Components * RFID/Code Readers * Relays * Pushbuttons & Indicators * Limit and Basic Switches * Timers * Counters * Metering Devices * Power Supplies Safety * Laser Scanners * Safety Mats * Edges and Bumpers * Programmable Safety Controllers * Light Curtains * Safety Relays * Safety Interlock Switches E76I-E-01 07/15 Note: Specifications are subject to change. Printed on recycled paper. (c) 2015 Omron Electronics LLC Printed in U.S.A.