1
Compact Photoelectric Sensor with Built-in Amplifier
E3Z-F
A Visible Spot That Simplifies the
Usage of Photoelectric Sensors
• E3Z-F is added to the E3Z Series of Photoelectric
Sensors that boasts annual worldwide sales of
1.5 million units.
• Many different sensing distances
Diffuse-reflective: 100 mm, 300 mm, 500 mm, 1 m
Through-beam: 20 m
Retro-reflective: 4 m
• Models with infrared LEDs are also available.
Features
Visible spot for easy installation Many different sensing distances are available, so you
can select the best model for your application distance.
Application
Materials handling: detect passing cardboard boxes Molding machines: detect falling molded objects
For the most recent information on models that have been
certified for safety standards, refer to your OMRON website.
Refer to the Safety Precautions on
page 9.
100
mm
300
mm
500
mm
1m
1
m
100
100
300
3
mm
3
300
300
500
500
500
mm
500
500
300
mm
500
500
Diffuse-reflective
E3Z-FD@@1
E3Z-FD@@2
E3Z-FD@@3
E3Z-FD@@4
E3Z-F
2
Ordering Information
Sensors [Refer to Dimensions on page 10.]
*1. Through-beam Sensors are normally sold in sets that include both the Emitter and Receiver. An order for the Emitter or Receiver alone cannot be accepted.
*2. The Reflector is sold separately. Select the Reflector model most suited to the application.
*3. Values in parentheses indicate the minimum required distance between the Sensor and Reflector.
Sensing
method Appearance Connecting
method Sensing distance Model
NPN output PNP output
Through-beam
(Emitter +
Receiver)
Pre-wired (2 m)
E3Z-FTN11 2M *1
Emitter E3Z-FTN11-L 2M
Receiver
E3Z-FTN11-D 2M
E3Z-FTP11 2M *1
Emitter E3Z-FTP11-L 2M
Receiver
E3Z-FTP11-D 2M
Connector (M12)
E3Z-FTN21 *1
Emitter E3Z-FTN21-L
Receiver
E3Z-FTN21-D
E3Z-FTP21 *1
Emitter E3Z-FTP21-L
Receiver
E3Z-FTP21-D
Pre-wired (2 m)
E3Z-FTN12 2M *1
Emitter E3Z-FTN12-L 2M
Receiver
E3Z-FTN12-D 2M
E3Z-FTP12 2M *1
Emitter E3Z-FTP12-L 2M
Receiver
E3Z-FTP12-D 2M
Connector (M12)
E3Z-FTN22 *1
Emitter E3Z-FTN22-L
Receiver
E3Z-FTN22-D
E3Z-FTP22 *1
Emitter E3Z-FTP22-L
Receiver
E3Z-FTP22-D
Retro-reflective
with
MSR function
Pre-wired (2 m) E3Z-FRN11 2M E3Z-FRP11 2M
Connector (M12) E3Z-FRN21 E3Z-FRP21
Diffuse-
reflective
Pre-wired (2 m) E3Z-FDN11 2M E3Z-FDP11 2M
Connector (M12) E3Z-FDN21 E3Z-FDP21
Pre-wired (2 m) E3Z-FDN12 2M E3Z-FDP12 2M
Connector (M12) E3Z-FDN22 E3Z-FDP22
Pre-wired (2 m) E3Z-FDN13 2M E3Z-FDP13 2M
Connector (M12) E3Z-FDN23 E3Z-FDP23
Pre-wired (2 m) E3Z-FDN14 2M E3Z-FDP14 2M
Connector (M12) E3Z-FDN24 E3Z-FDP24
Pre-wired (2 m) E3Z-FDN15 2M E3Z-FDP15 2M
Connector (M12) E3Z-FDN25 E3Z-FDP25
Pre-wired (2 m) E3Z-FDN16 2M E3Z-FDP16 2M
Connector (M12) E3Z-FDN26 E3Z-FDP26
Pre-wired (2 m) E3Z-FDN17 2M E3Z-FDP17 2M
Connector (M12) E3Z-FDN27 E3Z-FDP27
Pre-wired (2 m) E3Z-FDN18 2M E3Z-FDP18 2M
Connector (M12) E3Z-FDN28 E3Z-FDP28
Infrared light
Red light
20 m
20 m
*2
4 m
(100 mm)
*3
100 mm
300 mm
500 mm
1 m
100 mm
300 mm
500 mm
1 m
E3Z-F
3
Accessories (Sold Separately)
Reflector
(Required for Retro-reflective Sensors) A Reflector is not provided with the Sensor. It must be ordered separately.
[Refer to Dimensions on page 11.]
* Values in parentheses indicates the minimum required distance between the Sensor and Reflector.
Mounting Brackets A Mounting Bracket is not provided with the Sensor. It must be ordered separately as required.
[Refer to Dimensions on page 11.]
Note: 1. When using Through-beam models, order one bracket for the Receiver and one for the Emitter.
Sensor I/O Connectors (Sockets on One Cable End)
(Required for models for Connectors) A Connector is not provided with the Sensor. It must be ordered separately.
Note: When using Through-beam models, order one sensor I/O connector for the Receiver and one for the Emitter.
Appearance Sensing distance*Model Quantity Remarks
Rated value
Reference value
4 m (100 mm) --- E39-R1S 1for E3Z-FR@
Applicable
Sensors Mounting method Appearance Model Quantity
All models
M3 screw mounting E39-L189 1
M18 nut side mounting E39-L183 1
Applicable
Sensors Size Cable Appearance Cable type Model
Connector (M12) M12 Standard
2 m
4 conductors
XS2F-M12PVC4S2M
5 m XS2F-M12PVC4S5M
2 m XS2F-M12PVC4A2M
5 m XS2F-M12PVC4A5M
Straight
L-shaped
E3Z-F
4
Ratings and Specifications
*1. Values in parentheses indicate the minimum required distances between the Sensors and Reflectors.
*2. IP69K Degree of Protection Specifications.
IP69K is a protection specification stipulated by DIN 40050 Part 9 of the German standards.
The test item is sprayed with 80°C water from a nozzle of a specified shape at a water pressure of 80 to 100 bar. The amount
of water is 14 to 16 liters per munute.
The distance between the test item and the nozzle is 10 to 15 cm. The water is discharged at angles of 0°, 30°, 60°, and 90°
from the horizontal plane for 30 seconds at each angle while the test item is rotated horizontally.
*3. Only for Pre-wired models.
Sensing method Through-beam
Retro-reflective
with MSR
function
Diffuse-reflective
Model
NPN
out-
put
Pre-wired E3Z-FTN11 E3Z-FRN11 E3Z-FDN11 E3Z-FDN12 E3Z-FDN13 E3Z-FDN14
Connector
(M12) E3Z-FTN21 E3Z-FRN21 E3Z-FDN21 E3Z-FDN22 E3Z-FDN23 E3Z-FDN24
PNP
out-
put
Pre-wired E3Z-FTP11 E3Z-FRP11 E3Z-FDP11 E3Z-FDP12 E3Z-FDP13 E3Z-FDP14
Item Connector
(M12) E3Z-FTP21 E3Z-FRP21 E3Z-FDP21 E3Z-FDP22 E3Z-FDP23 E3Z-FDP24
Sensing distance 20 m
4 m (100 mm) *1
(when using
E39-R1S)
100 mm
(white paper:
300 × 300 mm)
300 mm
(white paper:
300 × 300 mm)
500 mm
(white paper:
300 × 300 mm)
1 m
(white paper:
300 × 300 mm)
Spot diameter (reference value) ---
40 × 45 mm
(at sensing
distance of
100 mm)
40 × 50 mm
(at sensing
distance of
300 mm)
45 × 50 mm
(at sensing
distance of
500 mm)
120 × 150 mm
(at sensing
distance of
1m)
Standard sensing object Opaque:
7 mm dia. min.
Opaque:
75 mm dia. min. ---
Differential travel --- 20% max. of sensing distance
Directional angle 2° min. ---
Light source (wavelength) Red LED (624 nm)
Power supply voltage 10 to 30 VDC (including voltage ripple of 10% (p-p) max.)
Current consumption
40 mA max.
(Emitter: 25 mA
max., Receiver:
15 mA max.)
25 mA max.
Control output
Load power supply voltage: 30 VDC max., Load current: 100 mA max.
(Residual voltage: 3 V max.)
Open collector output (NPN (negative common)/PNP (positive common) depending on model)
Light-ON/Dark-ON cable connection selectable
Indicators
Operation indicator (orange)
Stability indicator (green)
Trough-beam Emitter has only power indicator (green).
Protection circuits Power supply reverse polarity protection, Output short-circuit protection, and Output reverse polarity protection
Response time Operate or reset: 0.5 ms max.
Sensitivity adjustment One-turn adjuster
Ambient illumination (Receiver side) Incandescent lamp: 3,000 lx max.
Sunlight: 10,000 lx max.
Ambient temperature range Operating: −25 to 55°C, Storage: −40°C to 70°C (with no icing or condensation)
Ambient humidity range Operating: 35% to 85%, Storage: 35% to 95% (with no condensation)
Insulation resistance 20 MΩ min. (at 500 VDC)
Dielectric strength 1,000 VAC, at 50/60 Hz for 1 min
Vibration resistance (destruction) 10 to 55 Hz with a 1.5 mm double amplitude for 2 hours each in X, Y, and Z directions
Shock resistance (destruction) 500 m/s2 for 3 times each in X, Y, and Z directions
Degree of protection *2IEC IP67, DIN40050-9 standard IP69K
Connecting method Pre-wired (standard length: 2 m), Connector (M12, 4-Pin)
Weight
(packedstate/
Sensor only)
Pre-wired Approx. 120 g/
Approx. 105 g
Approx. 70 g/
Approx. 55 g
Connector Approx. 35 g/
Approx. 20 g
Approx. 25 g/
Approx. 10 g
Materials
Case ABS
Lens Methacrylic resin (PMMA)
Display Methacrylic resin (PMMA)
Sensitivity adjuster Polyacetal (POM)
Cable *3Vinyl chloride (PVC)
Nuts ABS
Accessories Nuts (2 pcs),
Instruction manual Nut (1 pcs), Instruction manual
E3Z-F
5
*1. IP69K Degree of Protection Specifications.
IP69K is a protection specification stipulated by DIN 40050 Part 9 of the German standards.
The test item is sprayed with 80°C water from a nozzle of a specified shape at a water pressure of 80 to 100 bar. The amount
of water is 14 to 16 liters per munute.
The distance between the test item and the nozzle is 10 to 15 cm. The water is discharged at angles of 0°, 30°, 60°, and 90°
from the horizontal plane for 30 seconds at each angle while the test item is rotated horizontally.
*2. Only for Pre-wired models.
Sensing method Through-beam Diffuse-reflective
Model
NPN
out-
put
Pre-wired E3Z-FTN12 E3Z-FDN15 E3Z-FDN16 E3Z-FDN17 E3Z-FDN18
Connector
(M12) E3Z-FTN22 E3Z-FDN25 E3Z-FDN26 E3Z-FDN27 E3Z-FDN28
PNP
out-
put
Pre-wired E3Z-FTP12 E3Z-FDP15 E3Z-FDP16 E3Z-FDP17 E3Z-FDP18
Item Connector
(M12) E3Z-FTP22 E3Z-FDP25 E3Z-FDP26 E3Z-FDP27 E3Z-FDP28
Sensing distance 20 m
100 mm
(white paper:
300 × 300 mm)
300 mm
(white paper:
300 × 300 mm)
500 mm
(white paper:
300 × 300 mm)
1 m
(white paper:
300 × 300 mm)
Spot diameter (reference value) ---
Standard sensing object Opaque:
7 mm dia. min. ---
Differential travel --- 20% max. of sensing distance
Directional angle 2° min. ---
Light source (wavelength) Infrared LED ( 850 nm)
Power supply voltage 10 to 30 VDC (including voltage ripple of 10% (p-p) max.)
Current consumption
40 mA max.
(Emitter: 25 mA max.,
Receiver:15 mA max.)
25mA max.
Control output
Load power supply voltage: 30 VDC max., Load current: 100 mA max.
(Residual voltage: 3 V max.)
Open collector output (NPN (negative common)/PNP (positive common) depending on model)
Light-ON/Dark-ON cable connection selectable
Indicators
Operation indicator (orange)
Stability indicator (green)
Trough-beam Emitter has only power indicator (green).
Protection circuits Power supply reverse polarity protection, Output short-circuit protection, and Output reverse polarity protection
Response time Operate or reset: 0.5 ms max.
Sensitivity adjustment One-turn adjuster
Ambient illumination (Receiver side) Incandescent lamp: 3,000 lx max.
Sunlight: 10,000 lx max.
Ambient temperature range Operating: −25 to 55°C, Storage: −40°C to 70°C (with no icing or condensation)
Ambient humidity range Operating: 35% to 85%, Storage: 35% to 95% (with no condensation)
Insulation resistance 20 MΩ min. (at 500 VDC)
Dielectric strength 1,000 VAC, at 50/60 Hz for 1 min
Vibration resistance (destruction) 10 to 55 Hz with a 1.5 mm double amplitude for 2 hours each in X, Y, and Z directions
Shock resistance (destruction) 500 m/s2 for 3 times each in X, Y, and Z directions
Degree of protection *1IEC IP67, DIN40050-9 standard IP69K
Connecting method Pre-wired (standard length: 2 m), Connector (M12, 4-Pin)
Weight
(packedstate/
Sensor only)
Pre-wired Approx. 120 g/
Approx. 105 g
Approx. 70 g/
Approx. 55 g
Connector Approx. 35 g/
Approx. 20 g
Approx. 25 g/
Approx. 10 g
Materials
Case ABS
Lens Methacrylic resin (PMMA)
Display Methacrylic resin (PMMA)
Sensitivity adjuster Polyacetal (POM)
Cable *2Vinyl chloride (PVC)
Nuts ABS
Accessories Nuts (2 pcs),
Instruction manual Nut (1 pcs), Instruction manual
E3Z-F
6
Engineering Data (Reference Value)
Parallel Operating Range
Through-beam Retro-reflective
E3Z-FT@@1/-FT@@2E3Z-FR@
Operating Range
Diffuse-reflective Diffuse-reflective Diffuse-reflective
E3Z-FD@@1/-FD@@2 E3Z-FD@@3/-FD@@4 E3Z-FD@@5/-FD@@6
Diffuse-reflective
E3Z-FD@@7/-FD@@8
Excess Gain vs. Distance
Through-beam Retro-reflective
E3Z-FT@@1/-FT@@2E3Z-FR@@
405 1015202530350
-1000
-800
-600
-400
-200
200
0
400
600
800
1000
Y
X
E3Z-FT@@1
E3Z-FT@@2
Distance X (m)
Distance Y (mm)
200
-200 82460
150
50
-50
100
0
-100
-150
Y
X
Reflector: E39-R1S
Distance X (m)
Distance Y (mm)
E3Z-FD@@2
E3Z-FD@@1
Y
X
Distance X (mm)
30
-30
0 100 200 300 400 500 600
20
-20
10
-10
0
Distance Y (mm)
Sensing object: white paper
100
-100 1800200 400 600 800 1000 1200 1400 16000
80
20
-40
40
-20
60
0
-60
-80
E3Z-FD@@4
E3Z-FD@@3
Sensing object: 300 × 300 mm white paper
Y
X
Distance X (mm)
Distance Y (mm)
E3Z-FD
@@
6
E3Z-FD
@@
5
Y
X
Distance X (mm)
Distance Y (mm)
-30
-20
-10
0
10
20
30
0 100 200 300 400 500 600
E3Z-FD@@8
E3Z-FD@@7
100
-100 1800200 400 600 800 1000 1200 1400 16000
80
20
-40
40
-20
60
0
-60
-80
Sensing object: 300
×
300 mm white paper
Y
X
Distance X (mm)
Distance Y (mm)
100
70
50
30
10
7
5
3
1
0.7
0.5
0.3
0.10 10203040506070
Distance (m)
Operating
level
Excess gain ratio
E3Z-FT@@2
E3Z-FT@@1
100
70
50
30
10
7
5
3
1
0.7
0.5
0.3
0.102 46810
Operating
level
Distance (m)
Excess gain ratio
Reflector: E39-R1S
E3Z-F
7
Excess Gain vs. Distance
Diffuse-reflective Diffuse-reflective Diffuse-reflective
E3Z-FD@@1/-FD@@2 E3Z-FD@@3/-FD@@4 E3Z-FD@@5/-FD@@6
Diffuse-reflective
E3Z-FD@@7/-FD@@8
Sensing Object Size vs. Distance
Diffuse-reflective Diffuse-reflective Diffuse-reflective
E3Z-FD@@1/-FD@@2 E3Z-FD@@3/-FD@@4 E3Z-FD@@5/-FD@@6
Diffuse-reflective
E3Z-FD@@7/-FD@@8
100
70
50
30
10
7
5
3
1
0.7
0.5
0.3
0.10 200 400 600 800 1000
Sensing object: 100 × 100 mm white paper
Distance (mm)
Excess gain ratio
Operating
level
E3Z-FD@@2
E3Z-FD@@1
100
70
50
30
10
7
5
3
1
0.7
0.5
0.3
0.10 0.5 1 1.5 2 2.5 3
E3Z-FD@@4
E3Z-FD@@3
Excess gain ratio
Operating
level
Distance (m)
Sensing object: 300 × 300 mm white paper
0 200 400 600 800 1000
100
70
50
30
10
7
5
3
1
0.7
0.5
0.3
0.1
E3Z-FD@@6
E3Z-FD@@5
Excess gain ratio
Operating
level
Distance (mm)
Sensing object: 300 × 300 mm white paper
0 0.5 1 1.5 2 2.5 3
100
70
50
30
10
7
5
3
1
0.7
0.5
0.3
0.1
E3Z-FD@@8
E3Z-FD@@7
Excess gain ratio
Operating
level
Distance (m)
Sensing object: 300 × 300 mm white paper
30050 150 250100 200
600
500
400
300
200
100
700
0
0
E3Z-FD@@1
E3Z-FD@@2
Side length (one side) of
sensing object: d (mm)
d
d
Sensing object: white paper
Distance (mm)
1800
1600
1400
1200
1000
600
800
400
200
2000
0
50050 150 250 350 450100 200 300 4000
E3Z-FD@@4
E3Z-FD@@3
d
d
Sensing object: white paper
Side length (one side) of
sensing object: d (mm)
Distance (mm)
E3Z-FD
@@
5
E3Z-FD
@@
6
30050 150 250100 200
600
500
400
300
200
100
700
0
0
d
d
Sensing object: white paper
Side length (one side) of
sensing object: d (mm)
Distance (mm)
E3Z-FD@@8
E3Z-FD@@7
1800
1600
1400
1200
1000
600
800
400
200
2000
0
50050 150 250 350 450100 200 300 4000
d
d
Sensing object: white paper
Side length (one side) of
sensing object: d (mm)
Distance (mm)
E3Z-F
8
I/O Circuit Diagrams
NPN Output
PNP Output
Connector Pin Arrangement Plugs (Sensor I/O Connectors)
Model Operation
mode Timing charts Operation
selector Output circuit
E3Z-FTN@@
E3Z-FRN@@
E3Z-FDN@@
Light-ON
Connect pink
lead (2) to
brown lead (1)
or leave open.
Dark-ON
Connect pink
lead (2) to blue
lead (3).
Model Operation
mode Timing charts Operation
selector Output circuit
E3Z-FTP
@@
E3Z-FRP
@@
E3Z-FDP
@@
Light-ON
Connect pink
lead (2) to
brown lead (1).
Dark-ON
Connect pink
lead (2) to blue
lead (3) or
leave open.
I
nc
id
ent
li
g
h
t
No incident light
ON
OFF
ON
OFF
Ope r at e
Reset
Ope r atio n
indicator
(o r ange )
(Between brown (1) and black (4) leads)
Output
t r ansisto r
Load
( e .g., rel a y )
Light-ON
Dark-ON
0V
10 to 30 VDC
Brown
Black
(Control
output)
Blue
Pink
100 mA
max.
Stability
indicator
(Green) Load
(Relay)
Operation
indicator
(Orange)
Photo-
electric
Sensor
main
circuit
1
4
3
2
Through-beam Receivers, Retro-reflective, Diffuse-reflective.
Incident light
No incident light
ON
OFF
ON
OFF
Operate
Reset
Operation
indicator
(orange)
(Between brown (1) and black (4) leads)
Output
transistor
Load
(e.g., relay)
1
Power
indicator
(Green)
10 to
30 VDC
Brown
Blue
Photo-
electric
Sensor
main
circuit
3
Through-beam Emitter
I
nc
id
ent
li
g
h
t
No incident light
ON
OFF
ON
OFF
Operate
Reset
Operation
indicator
(orange)
(Between blue (3) and black (4) leads)
Output
transistor
Load
(e.g., relay)
Light-ON
Dark-ON
4
3
2
1
Pink
0V
10 to 30 VDC
Brown
Black
(Control
output) Blue
100 mA
max.
Stability
indicator
(Green)
Load
(Relay)
Operation
indicator
(Orange)
Photo-
electric
Sensor
main
circuit
Through-beam Receivers, Retro-reflective, Diffuse-reflective.
Incident light
No incident light
ON
OFF
ON
OFF
Operate
Reset
Operation
indicator
(orange)
(Between blue (3) and black (4) leads)
Output
transistor
Load
(e.g., relay)
3
1
Power
indicator
(Green)
Photo-
electric
Sensor
main
circuit
10 to
30 VDC
Brown
Blue
Through-beam Emitter
M12 Connector Pin Arrangement
3
1
242
1
4
3
1
2
3
4
Pin No.
Brown
White
Blue
Black
Wire color
Pin arrangement
Classification Wire
color
Connector
pin No. Application
DC
Brown 1 Power supply (+V)
White 2 L/on • D/on selectable
Blue 3 Power supply (0 V)
Black 4 Output
M12, 4-pin Connectors
E3Z-F
9
Safety Precautions
To ensure safe operation, be sure to read and follow the Instruction Manual provided with the sensor.
Meanings of Alert symbols
This product is not designed or rated for ensuring
safety of persons either directly or indirectly.
Do not use it for such purposes.
Explosion, fire, or product malfunction may occur.
Never use the product with an AC power supply.
Do not use the product with voltage in excess of
the rated voltage.
Do not use the product with incorrect wiring.
Be sure to follow the safety precautions below for added
safety.
1. Do not use the product in atmospheres or environments
that exceed product ratings.
2. Do not use the product in an environment where it may be
exposed to inflammable or explosive gas.
3. Do not use the product in an environment where it may be
exposed to oil or chemicals.
4. Do not use the product in water, in rain, or outdoors.
5. Do not use the product in locations subject to
condensation due to high humidity.
6. Do not use the product in any other environment that
exceeds the ratings.
7. Do not use the product in a location subject to direct
sunlight.
8. Do not use the product in a location subject to direct
vibration or shock.
9. Do not use organic solvents (such as thinners or alcohol).
10.Do not attempt to disassemble, repair, or modify the
product.
11.Dispose of the product as industrial waste.
12.The E3Z-F devices shall be used with Class2 power
supply in the United States.
The ampere rating of the current protection shall be 1A for
26AWG, 2A for 24AWG, 3A for 22AWG, 5A for 20AWG.
1. Laying Sensor wiring in the same conduit or duct as high-
voltage wires or power lines may result in malfunction or
damage due to conduit or use shielded cable.
Separate the Sensor wiring or use a shielded cable.
2. Do not pull on the cable with excessive force.
3. If a commercial switching regulator is used, ground the FG
(frame ground) terminal.
4. The sensor will be available 100 ms after the power supply
is tuned ON. Start to use the sensor 100 ms or more after
turning ON the power supply. If the load and the sensor are
connected to separate power supplies, be sure to turn ON
the sensor first.
5. Output pulses may be generated even when the power
supply is OFF. Therefore, it is recommended to first turn
OFF the power supply for the load or the load line.
6. Do not tighten nuts or screws with excessive force. To
secure the Sensor with nuts, use the nuts that are included
with the Sensor, and tighten the nuts to a torque of 0.3 to
0.4 N•m (2.0 N•m max.). To secure the Sensor with M3
screws, tighten the screws to a torque of 0.6 N•m max..
WARNING
Indicates a potentially hazardous situation
which, if not avoided, will result in minor or
moderate injury, or may result in serious
injury or death. Additionally there may be
significant property damage.
CAUTION Indicates a potentially hazardous situation
which, if not avoided, may result in minor or
moderate injury or in property damage.
Precautions for
Safe Use
Supplementary comments on what to do or
avoid doing, to use the product safety.
Precautions for
Correct Use
Supplementary comments on what to do or
avoid doing, to prevent a failure to operate,
or undesirable effect on product
performance.
WARNING
CAUTION
Precautions for Safe Use
Precautions for Correct Use
E3Z-F
10
Dimensions
Sensors
(Unit: mm)
Tolerance class IT16 applies to dimensions in this data sheet unless otherwise specified.
Pre-wired
E3Z-FT@1@
E3Z-FR@11
E3Z-FD@1@
718.5 dia. +0.5
0
24.1
Two,
3.3 dia.
17.5 Emitter
Receiver
Applicable models:
E3Z-FR@11
E3Z-FD@1@Applicable models:
E3Z-FT@1@-D
E3Z-FR@11
E3Z-FD@1@
24.1 16.6 dia.
3131
21
0.8
3535
13.9
10
2
Two, 3.3 dia.
Vinyl insurated round cable 4 dia. 4 conductors
(Conductor cross section:0.128 mm2 (AWG26)/
Insulator diameter: 0.85 mm),
Standard length: 2 m
Minimum bending radius: 12 mm
19.8
6.7 dia.
27
1515 7.4
Sensitivity adjuster
Mounting Hole
Operation Indicator (orange)
Stability indicator (green)
M18×7.2
P=1
17.5
Optical axis
Optical axis
Applicable models:
E3Z-FT@1@
5.7
12.05
5.45
3.4
Connector (M12)
E3Z-FT@2@
E3Z-FR@21
E3Z-FD@2@
24.1
7
17.5
Receiver
Optical axis
Emitter
Applicable models:
E3Z-FR@21
E3Z-FD@2@
Applicable models:
E3Z-FT@2@-D
E3Z-FR@21
E3Z-FD@2@
16.6 dia.
31
31
21
24.1
0.8
12.05
5.45
35
35
13.9
10
2
M12×4
P=1
Two, 3.3 dia.
6.7 dia.
19.8
27
15
15
7.4
5.7
Mounting Hole
M18×7.2
P=1
12
34
Applicable models:
E3Z-FT@2@
Optical axis
17.5
Terminal No.
1
2
3
4
Specifications
+V
L/on • D/on selectable
0V
Output
11.6
Sensitivity adjuster
Operation Indicator (orange)
Stability indicator (green)
18.5 dia. +0.5
0
Two,
3.3 dia.
E3Z-F
11
Accessories (Sold Separately)
3-22
24 dia.
M18 × 7.5 P=1
8
Material: ABS
Tightening Nuts
34
40.3
5259.9
2.7
8
1.6
7.5
7
Two, 3.5 dia.
Material: <Reflective surface> Acrylic
<Rear surface> ABS
Reflector
E39-R1S
30°
2-20°
2-R10.15
R1.525
3.05 dia.
31.8
2-20°
45.5
2.5
20.1
R3
4-R2.16
Mounting Brackets
E39-L189
4.3
37
22
15
36.5
20
2-30°
2-4.3
2-R15
42
1.5
90°
(R16.5)
18.2 dia.
Mounting Brackets
E39-L183
E3Z-F
12
Photoelectric Sensor with
Grooved Design and Easy Settings
• Grooved-type Sensor with groove width of 25 mm.
• Models are available with one or two light axes.
• Models are available with M8 pre-wired connectors.
Compact and Reliable
Laser Photoelectric Sensor
• Safety and reliability with laser class 1 (JIS and IEC).
• Product lineup includes models with distance setting
without influence of color.
• Maximum ambient operating temperature of 55°C and
waterproof construction (IP67) in E3Z class.
Compact Photoelectric Sensor with Built-in Amplifier
E3Z
The Standard for Photoelectric Sensors
with a Secure Track Record of
1.5 Million Sold Yearly.
Grooved-type Photoelectric Sensor with Built-in Amplifier
E3Z-G
Compact Laser Photoelectric Sensor with Built-in Amplifier
E3Z-LT/LR/LL
• Long sensing distance of 30 m for Through-beam Models,
4 m for Retro-reflective Models, and 1 m for Diffuse-reflective Models.
• Mechanical axis and optical axis offset of less than ±2.5° simplifies
optical axis adjustment.
• High stability with unique algorithm that prevents interference of
external light.
E3Z-F
13
Compact Photoelectric Sensor with Stainless Steel Housing
E3ZM
Color Mark Detection Compact Photoelectric Sensor
E3ZM-V
Industry’s Smallest Color Mark Sensor
• Excellent space savings.
(Reduced by 90% compared with previous OMRON models.)
• Improved color-difference discrimination with white LED and
RGB signal processing.
•Equipped with two types of teaching:
(2-point teaching and automatic teaching.)
Transparent Object (PET Bottle) Detection Compact Photoelectric Sensor
E3ZM-B
Excellent PET Bottle Detection
Oil-resistant, Robust, Compact Photoelectric Sensor
E3ZM-C
Photoelectric Sensor for the Automotive and
Machine Tool Industries
•New detection method that is independent of bottle shape,
position, and contents.
•Automatic compensation against effects of contamination and temperature
(except E3ZM-B@T).
• Product lineup includes models with adjuster (E3ZM-B@T).
• Detects transparent objects made by PET, resin, or glass.
• Oil-resistant, rugged body made of stainless steel.
• Spot visibility improved to as far as 1 m away.
Product lineup includes through-beam models with orange spot.
• Product lineup includes M12 Smartclick pre-wired connector models.
• Strong resistance against detergents, disinfectants, and jet liquid flow.
• Product lineup includes BGS reflective models and through-beam models
with built-in slits.
• Certified by Ecolab Europe.
Stainless Steel Housing Ideal for Food Industry
(SUS316L)
Terms and Conditions of Sale
1. Offer; Acceptance. These terms and conditions (these "Terms") are deemed
part of all quotes, agreements, purchase orders, acknowledgments, price lists,
catalogs, manuals, brochures and other documents, whether electronic or in
writing, relating to the sale of products or services (collectively, the "Products")
by Omron Electronics LLC and its subsidiary companies (“Omron”). Omron
objects to any terms or conditions proposed in Buyer’s purchase order or other
documents which are inconsistent with, or in addition to, these Terms.
2. Prices; Payment Terms. All prices stated are current, subject to change with-
out notice by Omron. Omron reserves the right to increase or decrease prices
on any unshipped portions of outstanding orders. Payments for Products are
due net 30 days unless otherwise stated in the invoice.
3. Discounts. Cash discounts, if any, will apply only on the net amount of invoices
sent to Buyer after deducting transportation charges, taxes and duties, and will
be allowed only if (i) the invoice is paid according to Omron’s payment terms
and (ii) Buyer has no past due amounts.
4. Interest. Omron, at its option, may charge Buyer 1-1/2% interest per month or
the maximum legal rate, whichever is less, on any balance not paid within the
stated terms.
5. Orders. Omron will accept no order less than $200 net billing.
6. Governmental Approvals. Buyer shall be responsible for, and shall bear all
costs involved in, obtaining any government approvals required for the impor-
tation or sale of the Products.
7. Taxes. All taxes, duties and other governmental charges (other than general
real property and income taxes), including any interest or penalties thereon,
imposed directly or indirectly on Omron or required to be collected directly or
indirectly by Omron for the manufacture, production, sale, delivery, importa-
tion, consumption or use of the Products sold hereunder (including customs
duties and sales, excise, use, turnover and license taxes) shall be charged to
and remitted by Buyer to Omron.
8. Financial. If the financial position of Buyer at any time becomes unsatisfactory
to Omron, Omron reserves the right to stop shipments or require satisfactory
security or payment in advance. If Buyer fails to make payment or otherwise
comply with these Terms or any related agreement, Omron may (without liabil-
ity and in addition to other remedies) cancel any unshipped portion of Prod-
ucts sold hereunder and stop any Products in transit until Buyer pays all
amounts, including amounts payable hereunder, whether or not then due,
which are owing to it by Buyer. Buyer shall in any event remain liable for all
unpaid accounts.
9. Cancellation; Etc. Orders are not subject to rescheduling or cancellation
unless Buyer indemnifies Omron against all related costs or expenses.
10. Force Majeure. Omron shall not be liable for any delay or failure in delivery
resulting from causes beyond its control, including earthquakes, fires, floods,
strikes or other labor disputes, shortage of labor or materials, accidents to
machinery, acts of sabotage, riots, delay in or lack of transportation or the
requirements of any government authority.
11. Shipping; Delivery. Unless otherwise expressly agreed in writing by Omron:
a. Shipments shall be by a carrier selected by Omron; Omron will not drop ship
except in “break down” situations.
b. Such carrier shall act as the agent of Buyer and delivery to such carrier shall
constitute delivery to Buyer;
c. All sales and shipments of Products shall be FOB shipping point (unless oth-
erwise stated in writing by Omron), at which point title and risk of loss shall
pass from Omron to Buyer; provided that Omron shall retain a security inter-
est in the Products until the full purchase price is paid;
d. Delivery and shipping dates are estimates only; and
e. Omron will package Products as it deems proper for protection against nor-
mal handling and extra charges apply to special conditions.
12. Claims. Any claim by Buyer against Omron for shortage or damage to the
Products occurring before delivery to the carrier must be presented in writing
to Omron within 30 days of receipt of shipment and include the original trans-
portation bill signed by the carrier noting that the carrier received the Products
from Omron in the condition claimed.
13. Warranties. (a) Exclusive Warranty. Omron’s exclusive warranty is that the
Products will be free from defects in materials and workmanship for a period of
twelve months from the date of sale by Omron (or such other period expressed
in writing by Omron). Omron disclaims all other warranties, express or implied.
(b) Limitations. OMRON MAKES NO WARRANTY OR REPRESENTATION,
EXPRESS OR IMPLIED, ABOUT NON-INFRINGEMENT, MERCHANTABIL-
ITY OR FITNESS FOR A PARTICULAR PURPOSE OF THE PRODUCTS.
BUYER ACKNOWLEDGES THAT IT ALONE HAS DETERMINED THAT THE
PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR
INTENDED USE. Omron further disclaims all warranties and responsibility of
any type for claims or expenses based on infringement by the Products or oth-
erwise of any intellectual property right. (c) Buyer Remedy. Omron’s sole obli-
gation hereunder shall be, at Omron’s election, to (i) replace (in the form
originally shipped with Buyer responsible for labor charges for removal or
replacement thereof) the non-complying Product, (ii) repair the non-complying
Product, or (iii) repay or credit Buyer an amount equal to the purchase price of
the non-complying Product; provided that in no event shall Omron be responsi-
ble for warranty, repair, indemnity or any other claims or expenses regarding
the Products unless Omron’s analysis confirms that the Products were prop-
erly handled, stored, installed and maintained and not subject to contamina-
tion, abuse, misuse or inappropriate modification. Return of any Products by
Buyer must be approved in writing by Omron before shipment. Omron Compa-
nies shall not be liable for the suitability or unsuitability or the results from the
use of Products in combination with any electrical or electronic components,
circuits, system assemblies or any other materials or substances or environ-
ments. Any advice, recommendations or information given orally or in writing,
are not to be construed as an amendment or addition to the above warranty.
See http://www.omron247.com or contact your Omron representative for pub-
lished information.
14. Limitation on Liability; Etc. OMRON COMPANIES SHALL NOT BE LIABLE
FOR SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES,
LOSS OF PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY
WAY CONNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS
BASED IN CONTRACT, WARRANTY, NEGLIGENCE OR STRICT LIABILITY.
Further, in no event shall liability of Omron Companies exceed the individual
price of the Product on which liability is asserted.
15. Indemnities. Buyer shall indemnify and hold harmless Omron Companies and
their employees from and against all liabilities, losses, claims, costs and
expenses (including attorney's fees and expenses) related to any claim, inves-
tigation, litigation or proceeding (whether or not Omron is a party) which arises
or is alleged to arise from Buyer's acts or omissions under these Terms or in
any way with respect to the Products. Without limiting the foregoing, Buyer (at
its own expense) shall indemnify and hold harmless Omron and defend or set-
tle any action brought against such Companies to the extent based on a claim
that any Product made to Buyer specifications infringed intellectual property
rights of another party.
16. Property; Confidentiality. Any intellectual property in the Products is the exclu-
sive property of Omron Companies and Buyer shall not attempt to duplicate it
in any way without the written permission of Omron. Notwithstanding any
charges to Buyer for engineering or tooling, all engineering and tooling shall
remain the exclusive property of Omron. All information and materials supplied
by Omron to Buyer relating to the Products are confidential and proprietary,
and Buyer shall limit distribution thereof to its trusted employees and strictly
prevent disclosure to any third party.
17. Export Controls. Buyer shall comply with all applicable laws, regulations and
licenses regarding (i) export of products or information; (iii) sale of products to
“forbidden” or other proscribed persons; and (ii) disclosure to non-citizens of
regulated technology or information.
18. Miscellaneous. (a) Waiver. No failure or delay by Omron in exercising any right
and no course of dealing between Buyer and Omron shall operate as a waiver
of rights by Omron. (b) Assignment. Buyer may not assign its rights hereunder
without Omron's written consent. (c) Law. These Terms are governed by the
law of the jurisdiction of the home office of the Omron company from which
Buyer is purchasing the Products (without regard to conflict of law princi-
ples). (d) Amendment. These Terms constitute the entire agreement between
Buyer and Omron relating to the Products, and no provision may be changed
or waived unless in writing signed by the parties. (e) Severability
. If any provi-
sion hereof is rendered ineffective or invalid, such provision shall not invalidate
any other provision. (f) Setoff. Buyer shall have no right to set off any amounts
against the amount owing in respect of this invoice. (g) Definitions. As used
herein, “including” means “including without limitation”; and “Omron Compa-
nies” (or similar words) mean Omron Corporation and any direct or indirect
subsidiary or affiliate thereof.
Certain Precautions on Specifications and Use
1. Suitability of Use. Omron Companies shall not be responsible for conformity
with any standards, codes or regulations which apply to the combination of the
Product in the Buyer’s application or use of the Product. At Buyer’s request,
Omron will provide applicable third party certification documents identifying
ratings and limitations of use which apply to the Product. This information by
itself is not sufficient for a complete determination of the suitability of the Prod-
uct in combination with the end product, machine, system, or other application
or use. Buyer shall be solely responsible for determining appropriateness of
the particular Product with respect to Buyer’s application, product or system.
Buyer shall take application responsibility in all cases but the following is a
non-exhaustive list of applications for which particular attention must be given:
(i) Outdoor use, uses involving potential chemical contamination or electrical
interference, or conditions or uses not described in this document.
(ii) Use in consumer products or any use in significant quantities.
(iii) Energy control systems, combustion systems, railroad systems, aviation
systems, medical equipment, amusement machines, vehicles, safety equip-
ment, and installations subject to separate industry or government regulations.
(iv) Systems, machines and equipment that could present a risk to life or prop-
erty. Please know and observe all prohibitions of use applicable to this Prod-
uct.
NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS
RISK TO LIFE OR PROPERTY OR IN LARGE QUANTITIES WITHOUT
ENSURING THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO
ADDRESS THE RISKS, AND THAT THE OMRON’S PRODUCT IS PROP-
ERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE
OVERALL EQUIPMENT OR SYSTEM.
2. Programmable Products. Omron Companies shall not be responsible for the
user’s programming of a programmable Product, or any consequence thereof.
3. Performance Data. Data presented in Omron Company websites, catalogs
and other materials is provided as a guide for the user in determining suitabil-
ity and does not constitute a warranty. It may represent the result of Omron’s
test conditions, and the user must correlate it to actual application require-
ments. Actual performance is subject to the Omron’s Warranty and Limitations
of Liability.
4. Change in Specifications. Product specifications and accessories may be
changed at any time based on improvements and other reasons. It is our prac-
tice to change part numbers when published ratings or features are changed,
or when significant construction changes are made. However, some specifica-
tions of the Product may be changed without any notice. When in doubt, spe-
cial part numbers may be assigned to fix or establish key specifications for
your application. Please consult with your Omron’s representative at any time
to confirm actual specifications of purchased Product.
5. Errors and Omissions. Information presented by Omron Companies has been
checked and is believed to be accurate; however, no responsibility is assumed
for clerical, typographical or proofreading errors or omissions.
OMRON CANADA, INC. • HEAD OFFICE
Toronto, ON, Canada • 416.286.6465 • 866.986.6766 • www.omron247.com
OMRON ELECTRONICS DE MEXICO • HEAD OFFICE
México DF • 52.
55.59.01.43.00
• 01-800-226-6766 • mela@omron.com
OMRON ELECTRONICS DE MEXICO • SALES OFFICE
Apodaca, N.L. • 52.81.11.56.99.20 • 01-800-226-6766 • mela@omron.com
OMRON ELETRÔNICA DO BRASIL LTDA • HEAD OFFICE
São Paulo, SP, Brasil • 55.11.2101.6300 • www.omron.com.br
OMRON ARGENTINA • SALES OFFICE
Cono Sur • 54.11.4783.5300
OMRON CHILE • SALES OFFICE
Santiago • 56.9.9917.3920
OTHER OMRON LATIN AMERICA SALES
54.11.4783.5300
Authorized Distributor:
E76I-E-01 07/15 Note: Specifications are subject to change. © 2015 Omron Electronics LLC Printed in U.S.A.
Printed on recycled paper.
Automation Control Systems
• Machine Automation Controllers (MAC) • Programmable Controllers (PLC)
• Operator interfaces (HMI) • Distributed I/O • Software
Drives & Motion Controls
• Servo & AC Drives • Motion Controllers & Encoders
Temperature & Process Controllers
• Single and Multi-loop Controllers
Sensors & Vision
• Proximity Sensors • Photoelectric Sensors • Fiber-Optic Sensors
• Amplified Photomicrosensors • Measurement Sensors
• Ultrasonic Sensors • Vision Sensors
Industrial Components
• RFID/Code Readers • Relays • Pushbuttons & Indicators
• Limit and Basic Switches • Timers • Counters • Metering Devices
• Power Supplies
Safety
• Laser Scanners • Safety Mats • Edges and Bumpers • Programmable Safety
Controllers • Light Curtains • Safety Relays • Safety Interlock Switches
OMRON AUTOMATION AND SAFETY • THE AMERICAS HEADQUARTERS • Chicago, IL USA • 847.843.7900 • 800.556.6766 • www.omron247.com
OMRON EUROPE B.V. •
Wegalaan 67-69, NL-2132 JD, Hoofddorp, The Netherlands.
•
+31 (0) 23 568 13 00
•
www.industrial.omron.eu