LITE-ON SEMICONDUCTOR KBPC25005G(W) thru 2510G(W) REVERSE VOLTAGE - 50 to 1000 Volts FORWARD CURRENT - 25 Amperes GLASS PASSIVATED BRIDGE RECTIFIERS KBPC-GW FEATURES Rating to 1000V PRV High efficiency Glass passivated chip junction Electrically isolated metal case for maximum heat dissipation UL recognized file # E95060 (Wire) KBPC-G/KBPC-GW A B E D N ~ + _ ~ F C D F KBPC-G Case : Mounted in the bridge encapsulation Mounting : Hole for # 10 screw Poarity : As marked on case Weight : 0.85 ounces , 24.0 grams (terminal) : 0.74 ounces , 21.0 grams (wire) G H (Terminal) B K M I L N G J ~ _ A B C D E D MECHANICAL DATA DIM. + I J K L M N C ~ MIN. 31.80 MAX. 7.90 28.30 8.40 28.80 17.60 18.60 0.97 10.90 1.07 11.90 18.60 17.60 13.80 16.10 16.10 18.80 0.76 6.30 14.80 17.10 17.10 21.30 0.86 6.50 HOLE FOR NO. 10 SCREW 5.08 5.59 All Dimensions in millimeter MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25ambient temperature unless otherwise specified. SYMBOL CHARACTERISTICS Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current @TC =Ta Peak Forward Surge Current 8.3ms single half sine-wave super imposed on rated load Maximum forward Voltage at 12.5A DC Maximum DC Reverse Current at Rated DC Blocking Voltage @TJ =25 C @TJ =125 C VRRM VRMS VDC KBPC25 KBPC25 KBPC25 KBPC25 KBPC25 KBPC25 KBPC25 UNIT 005G/W 01G/W 02G/W 04G/W 06G/W 08G/W 10G/W V 50 100 1000 800 600 400 200 V 35 70 700 560 420 280 140 V 50 100 1000 800 600 400 200 I(AV) 25.0 A IFSM 350 A VF 1.1 V IR 5.0 500 uA I 2 t Rating for fusing (t < 8.3ms), (Note 1) I t 508 AS Typical Junction Capacitance per element (Note 2) CJ 300 pF R0JC 3.0 C/W TJ -55 to +150 C TSTG -55 to +150 C Typical Thermal Resistance (Note 3) Operating Temperature Range Storage Temperature Range 2 NOTES : 1.Measured at non-repetitive, for greater than 1ms and less than 8.3ms 2.Measured at 1.0MHz and applied reverse voltage of 4.0V DC. 3.Device mounted on 300mm x 300mm x 1.6mm Cu Plate Heatsink. 2 REV. 4, Sep-2010, KBDI02 RATING AND CHARACTERISTIC CURVES KBPC25005G(W) thru KBPC2510G(W) PEAK FORWARD SURGE CURRENT, AMPERES AVERAGE FORWARD CURRENT AMPERES FIG.1 - FORWARD CURRENT DERATING CURVE 20 15 10 5 SINGLE PHASE HALF WAVE 60Hz RESISTIVE OR INDUCTIVE LOAD 0 20 40 60 80 100 120 FIG.2 - MAXIMUM NON-REPETITIVE SURGE CURRENT 450 400 350 300 250 200 150 100 Single Half-Sine-Wave 50 0 1 140 2 5 CASE TEMPERATURE , C 50 100 NUMBER OF CYCLES AT 60Hz FIG.4 - TYPICAL FORWARD CHARACTERISTICS FIG.3 - TYPICAL JUNCTION CAPACITANCE 1000 INSTANTANEOUS FORWARD CURRENT ,(A) 100 100 10 1.0 TJ = 25 C 0.1 PULSE WIDTH 300us TJ = 25 C, f= 1MHz 10 0.01 0.1 1 4 100 10 0 REVERSE VOLTAGE , VOLTS 0.2 0.4 0.6 FIG.5 - TYPICAL REVERSE CHARACTERISTICS 10 TJ = 125 C 1.0 50V-400V 600V-1000V 0.1 TJ = 25 C 0.01 0 20 0.8 1.0 1.2 1.4 1.6 INSTANTANEOUS FORWARD VOLTAGE , VOLTS 100 INSTANTANEOUS REVERSE CURRENT ,(uA) CAPACITANCE , (pF) 20 10 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE, (%) 1.8 Legal Disclaimer Notice KBPC25005G(W) thru KBPC2510G(W) Important Notice and Disclaimer LSC reserves the right to make changes to this document and its products and specifications at any time without notice. Customers should obtain and confirm the latest product information and specifications before final design, purchase or use. LSC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does LSC assume any liability for application assistance or customer product design. LSC does not warrant or accept any liability with products which are purchased or used for any unintended or unauthorized application. No license is granted by implication or otherwise under any intellectual property rights of LSC. LSC products are not authorized for use as critical components in life support devices or systems without express written approval of LSC.