© 2001 IXYS All rights reserved
B4
Advanced Technical Information
Converter - Brake - Inverter Module (CBI3)
Input Rectifier D11 - D16
Symbol Conditions Maximum Ratings
VRRM 1600 V
IFAV TC = 80°C; sine 180° 65 A
IDAVM TC = 80°C; rectangular; d = 1/3; bridge 180 A
IFSM TVJ = 25°C; t = 10 ms; sine 50 Hz 850 A
Ptot TC = 25°C 170 W
Symbol Conditions Characteristic Values
(TVJ = 25°C, unless otherwise specified)
min. typ. max.
VFIF = 100 A; TVJ = 25°C 1.3 1.5 V
TVJ = 125°C 1.3 V
IRVR = VRRM; TVJ = 25°C 0.05 mA
TVJ = 125°C 1 mA
RthJC (per diode) 0.73 K/W
Three Phase Brake Chopper Three Phase
Rectifier Inverter
VRRM = 1600 V VCES = 600 V VCES = 600 V
IFAVM = 90 A IC25 = 50 A IC25 = 125 A
IFSM = 850 A VCE(sat) = 1.9 V VCE(sat) = 1.9 V
110
MUBW 100-06 A8
IXYS reserves the right to change limits, test conditions and dimensions.
Application: AC motor drives with
●Input from single or three phase grid
●Three phase synchronous or
asynchronous motor
●electric braking operation
Features
●High level of integration - only one power
semiconductor module required for the
whole drive
●NPT IGBT technology with low
saturation voltage, low switching
losses, high RBSOA and short circuit
ruggedness
●Epitaxial free wheeling diodes with
Hiperfast and soft reverse recovery
●Industry standard package with insulated
copper base plate and soldering pins for
PCB mounting
●Temperature sense included
NTC
D11 D13 D15
D12 D14 D16
123
D7
T7
T1 D1 T3 D3
T2 T4 T6
T5
D4
D2 D6
D5
21 22
7
64
5
16
15 18
17
20
19
11
10
23 24
14
8
9
12 13
Revision A 07.03.2001
1 - 4
© 2001 IXYS All rights reserved
B4
MUBW 100-06 A8
Output Inverter T1 - T6
Symbol Conditions Maximum Ratings
VCES TVJ = 25°C to 150°C 600 V
VGES Continuous ± 20 V
IC25 TC = 25°C 125 A
IC80 TC = 80°C 85 A
RBSOA VGE = ±15 V; RG = 2.2 Ω; TVJ = 125°C ICM = 200 A
Clamped inductive load; L = 100 µH VCEK ≤ VCES
tSC VCE = VCES; VGE = ±15 V; RG = 2.2 Ω; TVJ = 125°C 10 µs
(SCSOA) non-repetitive
Ptot TC = 25°C 410 W
Symbol Conditions Characteristic Values
(TVJ = 25°C, unless otherwise specified)
min. typ. max.
VCE(sat) IC = 100 A; VGE = 15 V; TVJ = 25°C 1.9 2.5 V
TVJ = 125°C 2.2 V
VGE(th) IC = 1.5 mA; VGE = VCE 4.5 6.5 V
ICES VCE = VCES; VGE = 0 V; TVJ = 25°C 1.4 mA
TVJ = 125°C 1.5 mA
IGES VCE = 0 V; VGE = ± 20 V 400 nA
td(on) 25 ns
tr11 ns
td(off) 150 ns
tf30 ns
Eon 1.0 mJ
Eoff 2.9 mJ
Cies VCE = 25 V; VGE = 0 V; f = 1 MHz 4.3 nF
QGon VCE= 300V; VGE = 15 V; IC = 100 A tbd nC
RthJC (per IGBT) 0.3 K/W
Inductive load, TVJ = 125°C
VCE = 300 V; IC = 100 A
VGE = ±15 V; RG = 2.2 Ω
Output Inverter D1 - D6
Symbol Conditions Maximum Ratings
IF25 TC = 25°C 140 A
IF80 TC = 80°C 85 A
Symbol Conditions Characteristic Values
min. typ. max.
VFIF = 60 A; VGE = 0 V; TVJ = 25°C 1.8 2.1 V
TVJ = 125°C 1.3 V
IRM IF = 60 A; diF/dt = -500 A/µs; TVJ = 125°C 28 A
trr VR = 300 V; VGE = 0 V 100 ns
RthJC (per diode) 0.61 K/W
2 - 4
© 2001 IXYS All rights reserved
B4
MUBW 100-06 A8
Brake Chopper T7
Symbol Conditions Maximum Ratings
VCES TVJ = 25°C to 150°C 600 V
VGES Continuous ± 20 V
IC25 TC = 25°C 75 A
IC80 TC = 80°C 50 A
RBSOA VGE = ±15 V; RG = 22 Ω; TVJ = 125°C ICM = 100 A
Clamped inductive load; L = 100 µH VCEK ≤ VCES
tSC VCE = VCES; VGE = ±15 V; RG = 22 Ω; TVJ = 125°C 10 µs
(SCSOA) non-repetitive
Ptot TC = 25°C 225 W
Symbol Conditions Characteristic Values
(TVJ = 25°C, unless otherwise specified)
min. typ. max.
VCE(sat) IC = 50 A; VGE = 15 V; TVJ = 25°C 1.9 2.3 V
TVJ = 125°C 2.1 V
VGE(th) IC = 1 mA; VGE = VCE 4.5 6.5 V
ICES VCE = VCES; VGE = 0 V; TVJ = 25°C 0.5 mA
TVJ = 125°C 0.5 mA
IGES VCE = 0 V; VGE = ± 20 V 200 nA
td(on) 50 ns
tr55 ns
td(off) 300 ns
tf30 ns
Eon 2.3 mJ
Eoff 1.7 mJ
Cies VCE = 25 V; VGE = 0 V; f = 1 MH z 2.8 nF
QGon VCE= 300 V; VGE = 15 V; IC = 50 A 120 nC
RthJC 0.55 K/W
Brake Chopper D7
Symbol Conditions Maximum Ratings
VRRM TVJ = 25°C to 150°C 600 V
IF25 TC = 25°C 35 A
IF80 TC = 80°C 24 A
Symbol Conditions Characteristic Values
min. typ. max.
VFIF = 50 A; TVJ = 25°C 2.5 2.7 V
TVJ = 125°C 2.2 V
IRVR = VRRM; TVJ = 25°C 0.1 mA
TVJ = 125°C 0.1 mA
IRM IF = 15 A; diF/dt = -400 A/µs; TVJ = 125°C 13 A
trr VR = 300 V 90 ns
RthJC 2.1 K/W
Inductive load, TVJ = 125°C
VCE = 300 V; IC = 50 A
VGE = ±15 V; RG = 22 Ω
3 - 4
© 2001 IXYS All rights reserved
B4
MUBW 100-06 A8
Temperature Sensor NTC
Symbol Conditions Characteristic Values
min. typ. max.
R25 T = 25°C 4.75 5.0 5.25 kΩ
B25/50 3375 K
Module
Symbol Conditions Maximum Ratings
TVJ -40...+150 °C
TJM 150 °C
Tstg -40...+125 °C
VISOL IISOL ≤ 1 mA; 50/60 Hz 2500 V~
MdMounting torque (M5) 3 - 6 Nm
Symbol Conditions Characteristic Values
min. typ. max.
Rpin-chip 5mΩ
dSCreepage distance on surface 6 mm
dAStrike distance in air 6 mm
RthCH with heatsink compound 0.01 K/W
Weight 300 g
Dimensions in mm (1 mm = 0.0394")
4 - 4
