Huanan Electronic Technology Co.,Ltd 4/F, Block B, Anhongji Technology Industrial Estate, Min Zhi Street, Longhua District Shenzhen City, GuangDong Province, China TEL: +86 755 -33168098 FAX: +86 755 -23272656 SPECIFICATION FOR LCD MODULE MODULE NO.: HTF0177SN-01 DOC.REVISION V1 Customer Approval: SIGNATURE PREPARED BY (RD ENGINEER) PREPARED BY (QA ENGINEER) CHECKED BY APPROVED BY HA DATE 2012-06-24 MODEL No:HTF0177SN-01 History of Versions and Modifications Version Modifications V1.0 Generation first vers ion PAGE:2 Date Jun 24,2012 MODELNo:HTF0177SN-01 CONTENTS NO. ITEM PAGE - Cover 1 - History of Versions and Modifications 2 - contents 3 1 General Specifications 4 2 Outline Drawing 5 3 Absolute Maximum Ratings 6 4 Led Backlight Specification and Interface Signal 7 5 Optical Characteristics 10 6 Cell test light waveform 12 7 Precautions for Use of LCD Modules 13 PAGE:3 MODEL No:HTF0177SN-01 1.General Specifications Item Main LCD Unit LCD Type 1.77 TFT LCD - Display color 262K LCD Duty 1/160 - LCD Bias - - Viewing Direction 12:00 O Clock Viewing Area(W H) - Active Area(W H) 28.032X35.04 Number of Dots 128(R,G,B) 160 mm Dot Size(W H) - mm Dot Pitch(W H) Controller mm mm mm ILI9163 VDD 2.7~3.3V Outline Dimensions Refer to outline drawing on next page Backlight LED(white) - Operating Temperature -20 +70 - Storage Temperature -30 +80 - V Weight TBD g Data Transfer 4 Line serial - Transmissive type - Display Type Note Note 1: Select by software, and color tune is slightly changed by temperature and driving voltage. Note 2: TBD- To Be Determined. Note 3: Requirements on Environmental Protection:RoHS PAGE:4 MODEL No:H7)6101 2XWOLQH'UDZLQJ 3$*( MODEL No:HTF0177SN-01 3. Absolute Maximum Raings ITEM SYMBOL MIN. MAX. UNIT Operating Ambient Temperature TOP -20 +70 C Operating Ambient Humidity HOP 10 90 % (RH) Storage Temperature TSTG -30 +80 C Storage Humidity HSTG 10 90 % (RH) NOTE Note 1. The absolute maximum ratings are the values that must not be exceeded at any time for this product. It is not allowed for any of these ratings to be exceeded. Should a product be used with any of the absolute maximum ratings exceeded, the characteristics of the product may not be recovered, or in an extreme case, the product may be permanently destroyed. Therefore, when designing a system incorporating the product, make sure that adequate attentions be paid to the variations in the supply voltages, the characteristics of parts that are connected, surges in the input and output lines, and the ambient temperatures. Note 2. This specification applys after the driver IC mounting and the FPC mounting. (This specification isnt applicable at time of driver IC un-mounting and FPC un-mounting.) LCD should keep the condition that dew dosent storage in case of driver IC un-mounting and FPC unmounting. Dew may break the LCD. Especially part is very weak for dew. PAGE:6 MODEL No: 07)6110 4. LED backlight specification and Interface Signal 4.1 LED backlight specification 3$*( MODEL No:HTF0177SN-01 4.2 Interface Signal PIN. SYMBOL No. Function 1 NC No connection 2 GND System Ground 3 LEDK Backlight LED1 Cathode. 4 LEDA Backlight LED Anode. 5 GND System Ground RESET Reset Signal pin ("Low" is enable) 6 7 RS Command/display data select pin 8 SDA Serial data input 9 SCK Serial Clock. 10 VCC Power supply 11 IOVC Power supply forthe I/Ocircuit. 12 CS Chip enable,active low 13 GND System Ground 14 NC No connection PAGE:8 MODEL No:HTF0177SN-01 5. Optical Characteristics ITEM SYMBOL CONDITION MIN. Transmittance(%) T Luminance L (180) Luminance Uniformity L (80) TYP. (200) CR (300) --- (61%) Tr Color Coordinate = Tf Upper Lower Left Right R G B Note 1. Ambient condition Note 2. Measure device 0 CR W 25 REMARK 10 x y x y x y x Y = 2 6010%RH BM-5A (TOPCON) 0 2 Note 4 (10) ms (15) (60) (55) (50) (50) (0.313) (0.329) (0.6457) (0.3391) (0.3438) (0.6012) (0.1476) (0.1110) ms Note 5 Note 6 under 10 Lunx in the darkroom viewing cone=1 IL=20mA, after 10 minutes operation. 1 L=500mm Note 3. Definition of Luminance Uniformity cd/m Note 3 NTSC Ratio View angle UNIT (5.8) Contrast Ratio Response Time MAX. L = L(MIN) / L (MAX) 100% PAGE:9 MODEL No:HTF0177SN-01 Note 4. Definition of Contrast Ratio CR = White Luminance (ON) / Black Luminance (OFF) Note 5. Definition of response time 90% amplitudes. The response time is defined as the time interval between the 10% and Note 6. Definition of view angle( ) Panel PAGE:10 MODEL No:HTF0177SN-01 6. Cell test light waveform Timing PAGE:11 MODEL No:HTF0177SN-01 7. Precautions for Use of LCD Modules 7.1 Handling Precautions 7.1.1 The display panel is made of glass. Do not subject it to a mechanical shock by dropping it from a high place, etc. 7.1.2 If the display panel is damaged and the liquid crystal substance inside it leaks out, be sure not to get any in your mouth, if the substance comes into contact with your skin or clothes, promptly wash it off using soap and water. 7.1.3 Do not apply excessive force to the display surface or the adjoining areas since this may cause the color tone to vary. 7.1.4 The polarizer covering the display surface of the LCD module is and easily scratched. Handle this polarizer carefully. 7.1.5 If the display surface is contaminated, breathe on the surface and gently wipe it with a soft dry cloth. If still not completely clear, moisten cloth with one of the following solvents: Isopropyl alcohol Ethyl alcohol Solvents other than those mentioned above may damage the polarizer. Especially, do not use the following: Water Ketone Aromatic solvents 7.1.6 Do not attempt to disassemble the LCD Module. 7.1.7 If the logic circuit power is off, do not apply the input signals. 7.1.8 To prevent destruction of the elements by static electricity, be careful to maintain an optimum work environment. a. Be sure to ground the body when handling the LCD Modules. b. Tools required for assembly, such as soldering irons, must be properly ground. c. To reduce the amount of static electricity generated, do not conduct assembly and other work under dry conditions. PAGE:12 MODEL No:HTF0177SN-01 d. The LCD Module is coated with a film to protect the display surface. Be care when peeling off this protective film since static electricity may be generated. 7.2 Storage precautions 7.2.1 When storing the LCD modules, avoid exposure to direct sunlight or to the light of fluorescent lamps. 7.2.2 The LCD modules should be stored under the storage temperature range. If the LCD modules will be stored for a long time, the recommend condition is: Temperature : Relatively humidity: 0 40 80% 7.2.3 The LCD modules should be stored in the room without acid, alkali and harmful gas. 7.3 The LCD modules should be no falling and violent shocking during transportation, and also should avoid excessive press, water, damp and sunshine. PAGE:13 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Arduino: A000096