934005650112 - NXP - Datasheet.Live

DATA SH EET

Product speciﬁcation

Supersedes data of 1999 Mar 30 2001 Oct 31

DISCRETE SEMICONDUCTORS

BGE885

860 MHz, 17 dB gain push-pull

amplifier

ook, halfpage

M3D248

2001 Oct 31 2

Philips Semiconductors Product speciﬁcation

860 MHz, 17 dB gain push-pull ampliﬁer BGE885

FEATURES

•Excellent linearity

•Extremely low noise

•Rugged construction

•TiPtAu metallized crystals ensure

optimal reliability.

DESCRIPTION

Hybrid amplifier module for use in

CATV systems operating over a

frequency range of 40 to 860 MHz

with a voltage supply of 24 V (DC).

PINNING - SOT115D

Note

1. Pins 1 and 9 carry DC voltages.

PIN DESCRIPTION

1 input; note 1

2 common

3 common

4 12 V, 60 mA supply terminal

5 common

6 common

7 common

8+V

9 output; note 1 Fig.1 Simplified outline.

page

789

246

351

Side view

MBK049

QUICK REFERENCE DATA

LIMITING VALUES

In accordance with the Absolute Maximum Rating System (IEC 60134).

SYMBOL PARAMETER CONDITIONS MIN. MAX. UNIT

Gppower gain f = 50 MHz 16.5 17.5 dB

Itot total current consumption (DC) VB=24V −240 mA

SYMBOL PARAMETER MIN. MAX. UNIT

VBDC supply voltage −28 V

ViRF input voltage −65 dBmV

Tstg storage temperature −40 +100 °C

Tmb operating mounting base temperature −20 +100 °C

2001 Oct 31 3

Philips Semiconductors Product speciﬁcation

860 MHz, 17 dB gain push-pull ampliﬁer BGE885

CHARACTERISTICS

Bandwidth 40 to 860 MHz; VB= 24 V; Tmb =30°C; ZS=Z

L=75Ω

Notes

1. fp= 349.25 MHz; Vp= 59 dBmV;

fq= 403.25 MHz; Vq= 59 dBmV;

measured at fp+f

q= 752.5 MHz.

2. Measured according to DIN45004B:

fp= 851.25 MHz; Vp=V

o= 59 dBmV;

fq= 858.25 MHz; Vq=V

o−6 dB;

fr= 860.25 MHz; Vr=V

o−6 dB;

measured at fp+f

q−f

r= 849.25 MHz.

3. The module normally operates at VB= 24 V, but is able to withstand supply transients up to 30 V.

SYMBOL PARAMETER CONDITIONS MIN. MAX. UNIT

Gppower gain f = 50 MHz 16.5 17.5 dB

SL slope cable equivalent f = 40 to 860 MHz 0.2 1.2 dB

FL ﬂatness of frequency response f = 40 to 860 MHz −±0.5 dB

s11 input return losses f = 40 to 450 MHz 14 −dB

f = 450 to 860 MHz 10 −dB

s22 output return losses f = 40 to 450 MHz 14 −dB

f = 450 to 860 MHz 10 −dB

d2second order distortion note 1 −−53 dB

Vooutput voltage dim =−60 dB; note 2 59 −dBmV

F noise ﬁgure f = 350 MHz −7.5 dB

f = 860 MHz −8dB

tot total current consumption (DC) note 3 −240 mA

2001 Oct 31 4

Philips Semiconductors Product speciﬁcation

860 MHz, 17 dB gain push-pull ampliﬁer BGE885

List of components (see Fig.2)

COMPONENT DESCRIPTION VALUE

C1, C3, C4 ceramic multilayer capacitor 1 nF

C2 ceramic multilayer capacitor 1 nF (max.)

R resistor 200 Ω,1 W

Pins 1 and 9 carry DC voltages.

Fig.2 Test circuit.

MGD013

RC2

input

12 V

BGE885

output

987654321

VB= 24 V

2001 Oct 31 5

Philips Semiconductors Product speciﬁcation

860 MHz, 17 dB gain push-pull ampliﬁer BGE885

PACKAGE OUTLINE

UNIT A2

max. cee

max. q1U1

max. U2W

REFERENCES

OUTLINE

VERSION EUROPEAN

PROJECTION ISSUE DATE

IEC JEDEC EIAJ

mm 20.8 9.1 0.51

0.38 0.25 27.2 2.54 13.75 2.54 5.08 12.7 8.8 4.15

3.85 2.4 38.1 25.4

10.2 4.2 44.75 8 0.25 0.1 3.8

∅ P

6-32

UNC

DIMENSIONS (mm are the original dimensions)

SOT115D

0 5 10 mm

scale

max. D

max. L

min.

max. Z

max.

Rectangular single-ended package; aluminium flange; 2 vertical mounting holes;

2 x 6-32 UNC and 2 extra horizontal mounting holes; 9 gold-plated in-line leads SOT115D

U1q

78923

564

PyMB

yMB

max.

97-04-10

q2yMB

2001 Oct 31 6

Philips Semiconductors Product speciﬁcation

860 MHz, 17 dB gain push-pull ampliﬁer BGE885

DATA SHEET STATUS

Notes

1. Please consult the most recently issued data sheet before initiating or completing a design.

2. The product status of the device(s) described in this data sheet may have changed since this data sheet was

published. The latest information is available on the Internet at URL http://www.semiconductors.philips.com.

DATA SHEET STATUS(1) PRODUCT

STATUS(2) DEFINITIONS

Objective data Development This data sheet contains data from the objective specification for product

development. Philips Semiconductors reserves the right to change the

speciﬁcation in any manner without notice.

Preliminary data Qualiﬁcation This data sheet contains data from the preliminary specification.

Supplementary data will be published at a later date. Philips

Semiconductors reserves the right to change the speciﬁcation without

notice, in order to improve the design and supply the best possible

product.

Product data Production This data sheet contains data from the product specification. Philips

Semiconductors reserves the right to make changes at any time in order

to improve the design, manufacturing and supply. Changes will be

communicated according to the Customer Product/Process Change

Notiﬁcation (CPCN) procedure SNW-SQ-650A.

DEFINITIONS

Short-form specification  The data in a short-form

specification is extracted from a full data sheet with the

same type number and title. For detailed information see

the relevant data sheet or data handbook.

Limiting values definition Limiting values given are in

accordance with the Absolute Maximum Rating System

(IEC 60134). Stress above one or more of the limiting

values may cause permanent damage to the device.

These are stress ratings only and operation of the device

attheseoratanyotherconditionsabovethosegiveninthe

Characteristics sections of the specification is not implied.

Exposure to limiting values for extended periods may

affect device reliability.

Application information  Applications that are

described herein for any of these products are for

illustrative purposes only. Philips Semiconductors make

norepresentationorwarrantythatsuch applicationswillbe

suitable for the specified use without further testing or

modification.

DISCLAIMERS

Life support applications  These products are not

designed for use in life support appliances, devices, or

systems where malfunction of these products can

reasonably be expected to result in personal injury. Philips

Semiconductorscustomersusingorselling theseproducts

for use in such applications do so at their own risk and

agree to fully indemnify Philips Semiconductors for any

damages resulting from such application.

Right to make changes  Philips Semiconductors

reserves the right to make changes, without notice, in the

products, including circuits, standard cells, and/or

software, described or contained herein in order to

improve design and/or performance. Philips

Semiconductors assumes no responsibility or liability for

theuse of anyoftheseproducts,conveysnolicence or title

under any patent, copyright, or mask work right to these

products,andmakesnorepresentations or warranties that

these products are free from patent, copyright, or mask

work right infringement, unless otherwise specified.

2001 Oct 31 7

Philips Semiconductors Product speciﬁcation

860 MHz, 17 dB gain push-pull ampliﬁer BGE885

NOTES

All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner.

The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed

without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license

under patent- or other industrial or intellectual property rights.

Philips Semiconductors – a world wide company

Contact information

For additional information please visit http://www.semiconductors.philips.com. Fax: +31 40 27 24825

For sales ofﬁces addresses send e-mail to: sales.addresses@www.semiconductors.philips.com.

Printed in The Netherlands 613518/04/pp8 Date of release: 2001 Oct 31 Document order number: 9397 750 08816