3MTM Four-Wall Header .100 x .100 Low Profile, SMT Straight, Straight and Rt Angle Through-Hole 2500 Series * Low profile, space saving design * Center slot polarization prevents mis-insertions and reduces insertion time * Dual slot polarization means broader compatibility with competitive polarization designs (not 10 pos.) * Optional retainer clip for locking sockets in place and increasing connection reliability in vibrationprone environments * Optional High temperature insulator suitable for "no lead" soldering operations * High temperature option in thru hole version suitable for "paste in hole" reflow soldering techniques * Exposed solder tails (on right angle version) provide ease of cleaning and reduced repair costs * Straight surfacemount version available * See regulatory information appendix (RIA) for chemical compliance information Date Modified: May 17, 2007 TS-0770-B Sheet 1 of 5 Physical Insulator Material: Glass Filled Polyester (PBT), Glass Filled Polyester (PCT)High temperature option Flammability: UL 94V-0 Color: Gray (PBT), Beige (PCT) or Black (PCT) Contact Material: Copper Alloy Plating Underplating: 100 " [ 2.54 m ] Nickel - Overall Wiping Area: Gold (See Ordering Information) Solder Tails: 200 " [ 5.08 m ] Tin Lead or Matte Tin (See Ordering Information) Marking: 3M Logo, Part Identification Number and Orientation Triangle Electrical Current Rating: 2 A Insulation Resistance: >1 x 109 at 500 VDC Withstanding Voltage: 1000 VRMS at Sea Level Environmental Temperature Rating: -55C to +105C Process Rating: 260C, (High Temp and PCT insulator versions only), single pass, (profile per J-STD-020C) PBT insulator version, maximum molded insulator temperature 191C (solder wave process only) Moisture Sensitivity Level: 1 (per J-STD-020C) UL File No.: E68080 3 Interconnect Solutions http://www.3M.com/interconnects/ 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3MTM Four-Wall Header .100 x .100 Low Profile, Straight Through-Hole 2500 Series B Inch NOTCH D .194 4.93 [mm] Tolerance Unless Noted NOTCH E .00 .0 .228 5.79 Inch .250 6.35 .338 8.59 .1 .000 .01 .005 [ ] Dimensions for Reference only .100 2.54 REF. PIN 1 .100 2.54 REF. NOTCH B SEE TABLE 1 POSITION 1 ORIENTATION TRIANGLE NOTCH A SEE TABLE 1 & NOTE 1 NOTCH C SEE TABLE 1 & NOTE 1 .0245 .0005 0.62 0.013 TYP .165 4.19 A .298 7.57 .390 9.91 .25 6.43 A .112 +/- .01[2.84] for 02&K2 versions .155 +/- .01[3.94] for 03 versions A SECTION A-A Notes: 1. Notches A & C will accomodate 3M Polarizing Keys (3M Part #3518 or N3518). 2. Contact tails .0245 [0.622] wire with .0075 [0.191] corner radii & .028 [.072] diagonal. 3. See page 4 for kink tail positions. 4. Solder stand offs facilitate .01 clearance above board for reflow soldering. Pin Qty 10 14 16 20 24 26 30 34 40 50 60 64 Ordering Information Prefix: Blank = Std. Temp. Gray (PBT)(UB or UG Pltg. Req'd) N = High Temp. Beige (PCT)(UB or UG Pltg. Req'd) N = High Temp. Black (PCT)(RB Pltg. Req'd) X25XX-60XX-XX Pin Quantity: (See Table 1) 3 Interconnect Solutions http://www.3M.com/interconnects/ .243 6.17 Solder Tail 02 = for .062 [1.57] thick board 03 = for .094 to .125 [2.39 to 3.18] thick board K2 = for .062 [1.57] thick board Table 1 Dimensions A B .788 [20.02] .708 [17.98] .988 [25.10] .908 [22.06] 1.088 [27.64] 1.008 [25.60] 1.288 [32.72] 1.208 [30.68] 1.488 [37.80] 1.408 [35.76] 1.588 [40.34] 1.508 [38.30] 1.788 [45.42] 1.708 [43.38] 1.988 [50.50] 1.908 [48.46] 2.288 [58.12] 2.208 [56.08] 2.788 [70.82] 2.708 [68.78] 3.288 [83.52] 3.208 [81.48] 3.488 [88.60] 3.408 [86.56] Polarizing Notches BC BCDE ABCDE ABCDE ABCDE ABCDE ABCDE ABCDE ABCDE ABCDE ABCDE ABCDE Plating: UG = 15" [0.38m] Gold with 200" [5.08m] 60:40 Tin-Lead Solder Tails (RIA E3 & C2 apply) UB = 30" [0.76m] Gold with 200" [5.05m] 60:40 Tin-Lead Solder Tails (RIA E3 & C2 apply) RB = 30" [0.76m] Gold with 200" [5.08m] Matte Tin Solder Tails (RIA E1 & C1 apply) TS-0770-B Sheet 2 of 5 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3MTM Four-Wall Header .100 x .100 Low Profile, Right Angle Through-Hole B .194 4.93 NOTCH E NOTCH D .228 5.79 .250 6.35 .100 2.54 REF. PIN 1 .100 2.54 REF. NOTCH B SEE TABLE 1 POSITION 1 ORIENTATION TRIANGLE NOTCH A SEE TABLE 1 & NOTE 1 .338 8.59 Pin Qty 10 14 16 20 24 26 30 34 40 50 60 64 2500 Series Table 1 Dimensions A B .788 [20.02] .708 [17.98] .988 [25.10] .908 [22.06] 1.088 [27.64] 1.008 [25.60] 1.288 [32.72] 1.208 [30.68] 1.488 [37.80] 1.408 [35.76] 1.588 [40.34] 1.508 [38.30] 1.788 [45.42] 1.708 [43.38] 1.988 [50.50] 1.908 [48.46] 2.288 [58.12] 2.208 [56.08] 2.788 [70.82] 2.708 [68.78] 3.288 [83.52] 3.208 [81.48] 3.488 [88.60] 3.408 [86.56] NOTCH C SEE TABLE 1 & NOTE 1 .0245 .0005 0.62 0.013 TYP .165 4.19 A .298 7.57 .390 9.91 Polarizing Notches BC BCDE ABCDE ABCDE ABCDE ABCDE ABCDE ABCDE ABCDE ABCDE ABCDE ABCDE .25 6.43 .243 6.17 .39 [9.9] .100 Ref [2.54] A SECTION A-A A .112 +/- .01[2.84] for 02&K2 versions .155 +/- .01[3.94] for 03 versions Inch [mm] Tolerance Unless Noted .0 Inch .1 .00 .000 .01 .005 [ ] Dimensions for Reference only Notes: 1. Notches A & C will accomodate 3M Polarizing Keys (3M Part #3518 or N3518). 2. Contacts tails .0245 [0.622] wire with .0075 [0.191] corner radii & .028 [.071] diagonal. 3. See page 4 for kink tail positions. Ordering Information Prefix: Blank = Std. Temp. Gray (PBT)(UB or UG Pltg. Req'd) N = High Temp. Beige (PCT)(UB or UG Pltg. Req'd) N = High Temp. Black (PCT)(RB Pltg. Req'd) Pin Quantity: (See Table 1) 3 Interconnect Solutions http://www.3M.com/interconnects/ X25XX-50XX-XX Plating: UG = 15" [0.38m] Gold with 200" [5.08m] 60:40 Tin-Lead Solder Tails (RIA E3 & C2 apply) UB = 30" [0.76m] Gold with 200" [5.05m] 60:40 Tin-Lead Solder Tails (RIA E3 & C2 apply) RB = 30" [0.76m] Gold with 200" [5.08m] Matte Tin Solder Tails (RIA E1 & C1 apply) Solder Tail 02 = for .062 [1.57] thick board 03 = for .094 to .125 [2.39 to 3.18] thick board K2 = for .062 [1.57] thick board TS-0770-B Sheet 3 of 5 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3MTM Four-Wall Header .100 x .100 Low Profile, Surfacemount Straight 2500 Series B NOTCH D .194 4.93 .228 5.79 NOTCH E .300 7.62 .200 5.08 .250 6.35 Inch .338 8.59 [mm] Tolerance Unless Noted .100 2.54 REF. .00 .0 Inch PIN 1 .100 2.54 REF. NOTCH B SEE TABLE 1 .000 .01 .005 .1 [ ] Dimensions for Reference only VACUUM CAP NOTCH A SEE TABLE 1 & NOTE 1 POSITION 1 ORIENTATION TRIANGLE NOTCH C SEE TABLE 1 & NOTE 1 .165 4.19 A VACUUM CAP REMOVED FOR CLARITY THIS VIEW .010 0.25 .298 7.57 .390 9.91 .25 6.43 .400 .010 10.16 0.10 A .170 4.32 .0245 .0005 0.62 0.013 TYP A .243 6.17 .440 .010 11.18 0.10 SECTION A-A Table 1 Pin Qty 10 14 16 20 24 26 30 34 40 50 60 64 Dimensions A .788 [20.02] .988 [25.10] 1.088 [27.64] 1.288 [32.72] 1.488 [37.80] 1.588 [40.34] 1.788 [45.42] 1.988 [50.50] 2.288 [58.12] 2.788 [70.82] 3.288 [83.52] 3.488 [88.60] B .708 [17.98] .908 [22.06] 1.008 [25.60] 1.208 [30.68] 1.408 [35.76] 1.508 [38.30] 1.708 [43.38] 1.908 [48.46] 2.208 [56.08] 2.708 [68.78] 3.208 [81.48] 3.408 [86.56] Polarizing Tape & Reel Notches Pkg Code BC WD (44 mm) BCDE WD (44 mm) A B C D E WE (56 mm) A B C D E WE (56 mm) A B C D E WE (56 mm) A B C D E WF (72 mm) A B C D E WF (72 mm) A B C D E WF (72 mm) A B C D E WH (120 mm) A B C D E WG (88 mm) A B C D E WH (120 mm) A B C D E WH (120 mm) .050 [1.27] .470 [11.94] .200 [5.08] .070 [1.78] .270 [6.86] .100 Typ [2.54] P.C. Board Foot Print Notes: 1. Notches A & C will accommodate 3M polarizing key N3518. 2. Vacuum cap will be centered on connectors with odd # ofpins/row. It will be offset away from Pin 1 on connectors having an even # of pins per row (shown). 3. Coplanarity .004 for less than 30 position, .006 for 30 and above. X25XX-6V0C-XX -XX Ordering Information Prefix: N = High Temp Black (PCT) (RB Plating Req'd) Pin Quantity: (See Table) 3 Interconnect Solutions http://www.3M.com/interconnects/ Packaging Options: WX = tape & reel packaging (see table 1) Plating: RB = 30" [0.76m] Gold with 200" [5.08m] Matte Tin Solder Tails (RIA E1 & C1 apply) TS-0770-B Sheet 4 of 5 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3MTM Four-Wall Header .100 x .100 Low Profile, Accessories 2500 Series Connector Dimension Pin Qty A 2500 & 3000 Series Shrouded Header 10 .81 [20.6,] 14 1.02 [25.9] 8 16 1.12 [28.4] 12 20 1.32 [33.5] 24 1.52 [38.7] 22 26 1.63 [41.4] 23 24 30 1.83 [46.4] 25 26 8 27 28 34 2.03 [51.6] 7 8 27 28 40 2.33 [59.2] 7 8 33 34 50 2.83 [71.9] 4 7 8 43 44 60 3.33 [84.6] 60 4 11 12 49 50 64 4 11 12 53 54 64 3.53 [89.7] Total Number of Pins Number of Tails Kinked 10 4 3 4 7 14 4 3 4 11 16 4 3 4 13 14 20 4 3 4 17 18 24 4 3 4 21 26 4 3 4 30 4 5 6 34 4 7 36 4 40 4 50 Positions Kinked Connector Pin Count: (See Table) Kinked Tail Detail: Kink is located .05" below bottom surface of plastic. External radius of kink toward part centerline. Part Number Material 3505-33B Nylon 3505-33 Nylon Clip Height Code 0 = .31 [ 7.9 ] for Sockets W/O Strain Relief 1 = .53 [ 13.5 ] for Sockets with Strain Relief Color Black Gray A .11 [2.8] Maximum Uncoated Area (On both edges) .144 [3.66] .204 [5.18] .830 [21.08] 3505-8XXX .2 .1 [5.1] .057 [1.45] Clip Height Code Alternate Uncoated Area .573 [14.55] .043 [1.09] .118 [3.00] Long Snap In Latch Short/Long Socket Retainer Clip Note: Stainless steel with gray polyurethane coating. Note: Latches not compatible with reflow soldering. For reflow soldering, attach latches after soldering. Part Number Material 3201-3 PCT 3201-1 PBT .118 [3.00] .370 [9.40] Color Black Gray .102 [2.59] Part Number Material Color N3518 LCP Black 0.02 3518 PBT Gray 0.02 Breakaway Tab .34 Ref [8.6] .267 [6.78] Dim A .09 [2.3] A .15 [3.8] .030 Dia [0.76] .082 [2.10] Polarizing Post 3 Interconnect Solutions http://www.3M.com/interconnects/ Note: #2216 B/A Scotchweld can be used to adhere keys. Polarizing Keys TS-0770-B Sheet 5 of 5 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 Regulatory Information Appendix 3M Electronic Solutions Division/Interconnect EUROPE Appendix E1: European Union RoHS Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as amended by EU Commission Decision 2005/618/EC. This product is RoHS Compliant 2005/95/EC. "RoHS Compliant 2005/95/EC" means that the product or part ("Product") does not contain any of the substances in excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/ EC, unless the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information represents 3M's best knowledge and belief based upon information provided by third party suppliers to 3M. In the event any product is proven not to conform with 3M's Regulatory Information Appendix, then 3M's entire liability and Buyer's exclusive remedy will be in accordance with the Warranty stated below. Appendix E2: European Union RoHS Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as amended by EU Commission Decision 2005/618/EC. This product contains lead in the compliant pin area in excess of the maximum concentration value allowed but is compliant by exemption under EU Commission Decision 2005/747/EC. "RoHS Compliant 2005/95/EC" means that the product or part ("Product") does not contain any of the substances in excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/ EC, unless the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information represents 3M's best knowledge and belief based upon information provided by third party suppliers to 3M. In the event any product is proven not to conform with 3M's Regulatory Information Appendix, then 3M's entire liability and Buyer's exclusive remedy will be in accordance with the Warranty stated below. Appendix E3: European Union RoHS Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment as amended by Commission Decision 2005/618/EC. This product contains lead in the solder tail area in excess of the maximum concentration value allowed. Unless otherwise stated by 3M in writing, this information represents 3M's best knowledge and belief based upon information provided by third party suppliers to 3M. In the event any product is proven not to conform with 3M's Regulatory Information Appendix, then 3M's entire liability and Buyer's exclusive remedy will be in accordance with the Warranty stated below. Appendix E4: European Union RoHS Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as amended by EU Commission Decision 2005/618/EC. This product contains decaBDE in the insulating material in excess of the maximum concentration value allowed but is compliant by exemption under EU Commission Decision 2005/17/EC. "RoHS Compliant 2005/95/EC" means that the product or part ("Product") does not contain any of the substances in excess of the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information represents 3M's best knowledge and belief based upon information provided by third party suppliers to 3M. In the event any product is proven not to conform with 3M's Regulatory Information Appendix, then 3M's entire liability and Buyer's exclusive remedy will be in accordance with the Warranty stated below. RIA-2217-A CHINA Appendix C1: China RoHS Electronic Industry Standard of the People's Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for Certain Hazardous Substances in Electronic Information Products. This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means that the product or part does not contain any of the following substances in excess of the following maximum concentration values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing, this information represents 3M's best knowledge and belief based upon information provided by third party suppliers to 3M. In the event any product is proven not to conform with 3M's Regulatory Information Appendix, then 3M's entire liability and Buyer's exclusive remedy will be in accordance with the Warranty stated below. Appendix C2: China RoHS 20 Electronic Industry Standard of the People's Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for Certain Hazardous Substances in Electronic Information Products. This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means that the product or part does contain a substance, as detailed in the chart below, in excess of the following maximum concentration values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing, this information represents 3M's best knowledge and belief based upon information provided by third party suppliers to 3M. The numerical reference in the symbol above should not be construed as a representation regarding the product's life or an extension of a product warranty. The product warranty is stated below. In the event any product is proven not to conform with 3M's Regulatory Information Appendix, then 3M's entire liability and Buyer's exclusive remedy will be in accordance with the product Warranty stated below. Name and Content of Hazardous Substances or Elements Important Notice All statements, technical information, and recommendations related to 3M's products are based on information believed to be reliable, but the accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Any statements related to the product which are not contained in 3M's current publications, or any contrary statements contained on your purchase order shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M. Warranty; Limited Remedy; Limited Liability. This product will be free from defects in material and manufacture for a period of ninety (90) days from the time of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M's option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of the legal theory asserted. 3 Electronic Solutions Division 6801 River Place Blvd. Austin, TX 78726-9000 800/225-5373 www.3M.com/interconnects RIA-2217-A (c) 3M 2007