Model 940 High Range Torque Watch Gauge Series DESCRIPTION The 940 high-range torque watch gage series accurately The 940 Series utilizes a calibrated spring, shaft, and pointer measures high range torque. A 3/8 inch keyed chuck and a 3/8 assembly within a rugged steel and aluminum housing. The unit inch square socket driver adaptor provides a simple means of can measure torque in either a clockwise or counterclockwise coupling to the device under measurement. direction. Internal stainless steel rotation stops help prevent damage from over-torque up to two times the normal range. FEATURES * 2.5 k gm-cm to 2.8 k gm-cm [15 in-oz to 200 in-oz] [0.1 Nmm to 1.4 Nmm] capacities * 2 % accuracy * 3/8-in keyed chuck (standard) and 3/8-in square socket driver adapter (optional) * Dial indication * Overload protection Model 940 High Range Torque Watch Gauge Series Standard Metric Model Order codes oz-in Model Order codes Kgm-cm 940-1 TQ9401 30 to 200 940-1M TQ9401M 2 to 14 940-2 TQ9402 15 to 100 940-2M TQ9402M 1 to 7 System International Model Order codes N-mm Accuracy 940-1SI TQ9401SI 0.25 to 1.4 2 % 940-2SI TQ9402SI 0.1 to 0.7 2 % Warranty. Honeywell warrants goods of its manufacture as being free of defective materials and faulty workmanship. Honeywell's standard product warranty applies unless agreed to otherwise by Honeywell in writing; please refer to your order acknowledgement or consult your local sales office for specific warranty details. If warranted goods are returned to Honeywell during the period of coverage, Honeywell will repair or replace, at its option, without charge those items it finds defective. The foregoing is buyer's sole remedy and is in lieu of all warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. In no event shall Honeywell be liable for consequential, special, or indirect damages. While we provide application assistance personally, through our literature and the Honeywell web site, it is up to the customer to determine the suitability of the product in the application. Specifications may change without notice. The information we supply is believed to be accurate and reliable as of this printing. However, we assume no responsibility for its use. For more information about Sensing and Control products, visit www.honeywell.com/sensing or call +1-815-235-6847 Email inquiries to info.sc@honeywell.com WARNING PERSONAL INJURY * DO NOT USE these products as safety or emergency stop devices or in any other application where failure of the product could result in personal injury. Failure to comply with these instructions could result in death or serious injury. WARNING MISUSE OF DOCUMENTATION * The information presented in this catalogue is for reference only. DO NOT USE this document as product installation information. * Complete installation, operation and maintenance information is provided in the instructions supplied with each product. Failure to comply with these instructions could result in death or serious injury. Sensing and Control Automation and Control Solutions Honeywell 1985 Douglas Drive North Golden Valley, MN 55422 USA +1-815-235-6847 www.honeywell.com/sensing 008788-1-EN IL50 GLO June 2008 Copyright (c) 2008 Honeywell International Inc. All rights reserved.