RoHS Compliant, ELV Compliant
PolyZen Devices
RoHS Compliant, ELV Compliant 33
5
PolyZen devices are polymer-enhanced, precision Zener
diode micro-assemblies. They offer resettable protection
against multi-Watt fault events without the need for
multi-Watt heat sinks.
The Zener diode used for voltage clamping a PolyZen
micro-assembly was selected due to its relatively flat
voltage vs. current response. This helps improve output
voltage clamping, even when input voltage is high and
diode currents are large.
An advanced feature of the PolyZen micro-assembly is
that the Zener diode is thermally coupled to a resistively
non-linear, PPTC (polymer positive temperature
coefficient) layer. This PPTC layer is fully integrated into
the device and is electrically in series between VIN and
the diode clamped VOUT.
This advanced PPTC layer responds to either extended
diode heating or overcurrent events by transitioning
from a low to high resistance state, also known as
“tripping.” A tripped PPTC will limit current and generate
voltage drop. It helps to protect both the Zener diode
and the follow-on electronics and effectively increases
the diode’s power handling capability.
The polymer-enhanced Zener diode helps protect
sensitive portable electronics from damage caused by
inductive voltage spikes, voltage transients, incorrect
power supplies and reverse bias. These devices are
particularly suitable for portable electronics and other
low-power DC devices.
• Stable Zener diode helps shield downstream
electronics from overvoltage and reverse bias
• Trip events shut out overvoltage and reverse
bias sources
• Analog nature of trip events helps minimize damage
from upstream inductive spikes
• Minimal power dissipation requirements
• Single component placement
• Overvoltage transient suppression
• Stable VZ vs. fault current
• Time delayed, overvoltage trip
• Time delayed, reverse bias trip
• Multi-Watt power handling capability
• Integrated device construction
• RoHS compliant
• DC power port protection in portable electronics
• DC power port protection for systems using barrel
jacks for power input
• Internal overvoltage and transient suppression
• DC output voltage regulation
• Tablet PCs and portable electronics
PolyZen Devices
Polymer Protected Zener Diode
Benefits Features
Applications
2013_CP_S05-PolyZen.indd 33 8/3/13 11:10 AM
RoHS Compliant, ELV Compliant
RoHS Compliant, ELV Compliant
34
5
(Performance ratings @ 25°C unless otherwise specified)
+
Power Supply
(External or Internal)
GND
1
2
3
Regulated
Output Protected Downstream
Electronics
VOUT
VIN
RLOAD
Protected Electronics
PolyZen
Device
Polymer PTC
GND
Zener
Diode
VIN VOUT
GND
VIN VOUT
IPTC IOUT
IFLT
ZEN056V130A24LS 5.45 5.60 5.75 0.10 1.30 0.12 0.16 24V 3A +10/-40 +24/-16V
ZEN059V130A24LS 5.80 5.90 6.00 0.10 1.30 0.12 0.15 24V 3A +6/-40 +24/-16V
ZEN065V130A24LS 6.35 6.50 6.65 0.10 1.30 0.12 0.16 24V 3A +6/-40 +24/-16V
ZEN098V130A24LS 9.60 9.80 10.00 0.10 1.30 0.12 0.16 24V 3A +3.5/-40 +24/-16V
ZEN132V130A24LS 13.20 13.40 13.60 0.10 1.30 0.12 0.16 24V 3A +2/-40 +24/-16V
ZEN164V130A24LS 16.10 16.40 16.60 0.10 1.30 0.12 0.16 24V 3A +1.25/-40 +24/-16V
ZEN056V230A16LS 5.45 5.60 5.75 0.10 2.30 0.04 0.06 16V 5A +5/-40 +16/-12V
ZEN065V230A16LS 6.35 6.50 6.65 0.10 2.30 0.04 0.06 16V 5A +3.5/-40 +16/-12V
ZEN098V230A16LS 9.60 9.80 10.00 0.10 2.30 0.04 0.06 16V 5A +3.5/-40 +16/-12V
ZEN132V230A16LS 13.20 13.40 13.60 0.10 2.30 0.04 0.06 16V 5A +2/-40 +20/-12V
ZEN056V075A48LS 5.45 5.60 5.75 0.10 0.75 0.28 0.45 48V 3A +10/-40 +48/-16V
ZEN132V075A48LS 13.20 13.40 13.60 0.10 0.75 0.28 0.45 48V 3A +2/-40 +48/-16V
ZEN056V115A24LS 5.45 5.60 5.75 0.10 1.15 0.15 0.18 24V 3A +10/-40 +24/-16V
ZEN056V130A24CE 5.45 5.60 5.75 0.10 1.30 0.070 0.105 24V 3A +10/-40 +24/-16V
ZEN056V230A16CE 5.45 5.60 5.75 0.10 2.30 0.032 0.060 16V 5A +5/-40 +16/-12V
ZEN056V260A16CE 5.45 5.60 5.75 0.10 2.60 0.032 0.045 16V 5A +5/-40 +16/-12V
ZEN132V130A24CE 13.20 13.40 13.65 0.10 1.30 0.070 0.105 24V 3A +3/-40 +24/-16V
ZEN132V230A16CE 13.20 13.40 13.65 0.10 2.30 0.032 0.060 16V 5A +3/-40 +16/-12V
ZEN132V260A16CE 13.20 13.40 13.65 0.10 2.60 0.032 0.045 16V 5A +3/-40 +16/-12V
LS module height is 1.7mm typical. CE module height is 1.0mm typical.
† Typical operating current is 500μA @ 5.0V which meets USB suspend mode requirement.
Part Number
VZ(V)
Min Typ Max
IZt
(A)
IHOLD
@ 20°C
(A)
RTyp
(Ω)
R1MAX
(Ω)
VINT MAX
Test
VINT MAX Current
(V) (A)
IFLT MAX
Test
IFLT MAX Voltage
(A) (V)
VZ Zener clamping voltage measured at current IZT and 20°C.
IZT Test current at which VZ is measured.
IHOLD Maximum steady state current IPTC that will not generate a trip event at the specified
temperature. Ratings assume IFLT = 0A.
RTyp Typical resistance between VIN and VOUT pins when the device is at room temperature.
R1MAX The maximum resistance between VIN and VOUT pins, at room temperature, one hour after
first trip or after reflow soldering.
IFLT Current flowing through the Zener diode.
IFLT MAX Maximum RMS fault current the Zener diode component of the device can withstand and
remain resettable; testing is conducted at rated voltage with no load connected to VOUT.
VINT MAX The voltage (VIN - VOUT “post trip”) at which typical qualification devices (98% devices, 95%
confidence) survived at least 100 trip cycles and 24 hours trip endurance when “tripped” at
the specified voltage and current (IPTC).
IPTC Current flowing through the PPTC portion of the circuit.
IOUT Current flowing out the VOUT pin of the device.
Trip Event A condition where the PPTC transitions to a high resistance state, thereby limiting IPTC, and
significantly increasing the voltage drop between VIN and VOUT.
Figure PZ1 Typical Application Block Diagram for PolyZen Devices
Table PZ1 Electrical Characteristics for PolyZen Devices
Table PZ2 Definitions of Terms for PolyZen Devices
2013_CP_S05-PolyZen.indd 34 8/3/13 11:10 AM
RoHS Compliant, ELV Compliant
PolyZen Devices
RoHS Compliant, ELV Compliant 35
5
VOUT Peak vs. IFLT RMS (IOUT = 0)
VOUT Peak (V)
IFLT RMS (A)
A
BC
0.0
-0.2
-0.4
-0.6
-0.8
-1.0
-1.2
-50 -40 -30 -20 -10 0
A = ZENxxxV1yyA24LS
B = ZENxxxV230A16LS
C = ZENxxxV075A48LS
Figure PZ6
VOUT Peak vs. IFLT RMS (IOUT = 0)
IFLT RMS (A)
01234567 8910
VOUT Peak (V)
22.0
20.0
18.0
16.0
14.0
12.0
10.0
8.0
6.0
4.0
2.0
0
A = ZEN056V230A16LS
B = ZEN065V230A16LS
C = ZEN098V230A16LS
D = ZEN132V230A16LS
A
B
C
D
Figure PZ4
01234567 8910
Time-to-Trip vs. IFLT RMS (IOUT = 0)
Time-to-Trip (s)
IFLT RMS (A)
10
1
0.1
0.01
A = ZEN056V1yyA24LS
B = ZEN059V130A24LS
C = ZEN065V130A24LS
D = ZEN098V130A24LS
E = ZEN132V130A24LS
F = ZEN164V130A24LS
A
B
C
D
E
F
Figure PZ3
VOUT Peak vs. IFLT RMS (IOUT = 0)
VOUT Peak (V)
IFLT RMS (A)
01234567 8910
22.0
20.0
18.0
16.0
14.0
12.0
10.0
8.0
6.0
4.0
2.0
0
A = ZEN056V1yyA24LS
B = ZEN059V130A24LS
C = ZEN065V130A24LS
D = ZEN098V130A24LS
E = ZEN132V130A24LS
F = ZEN164V130A24LS
A
B
C
D
E
F
Figure PZ2
3.5
3.0
2.5
2.0
1.5
1.0
0.5
0.0
-40 -20 0 20 40 60 80 100
IHOLD (A)
Ambient Temperature (˚C)
Temperature Effect on IHOLD (IFLT = 0)
A
C
D
B
A = ZENxxxV130A24LS
B = ZENxxxV230A16LS
C = ZENxxxV075A48LS
D = ZENxxxV115A24LS
Figure PZ8
Time-to-Trip vs. IFLT RMS (IOUT = 0)
Time-to-Trip (s)
IFLT RMS (A)
-50 -40 -30 -20 -10 0
100
10
1
0.1
0.01
0.001
A
B
C
A = ZENxxxV1yyA24LS
B = ZENxxxV230A16LS
C = ZENxxxV075A48LS
Figure PZ7
01234567 8910
Time-to-Trip vs. IFLT RMS (IOUT = 0)
Time-to-Trip (s)
IFLT RMS (A)
100
10
1
0.1
0.01
A = ZEN056V230A16LS
B = ZEN065V230A16LS
C = ZEN098V230A16LS
D = ZEN132V230A16LS
A
B
C
D
Figure PZ5
Time-to-Trip (s)
0510 15 20 3025 35 40 45
10
1
0.1
0.01
0.001
IPTC RMS (A)
Time-to-Trip vs. IPTC RMS (IFLT = 0)
A
B
C
A = ZENxxxV1yyA24LS
B = ZENxxxV230A16LS
C = ZENxxxV075A48LS
Figure PZ9
Figures PZ2-PZ9 Typical Performance Curves for PolyZen Devices - LS Series
2013_CP_S05-PolyZen.indd 35 8/3/13 11:10 AM
RoHS Compliant, ELV Compliant
RoHS Compliant, ELV Compliant
36
5
0.0
2.0
4.0
6.0
8.0
10.0
12.0
14.0
16.0
18.0
0 1 2 3 4 5 6 7 8 9 10
VOUTPeak (V)
IFLT RMS (A)
VOUTPeak vs. IFLT RMS(IOUT=0)
A
BA = ZEN056V130A24CE
B = ZEN132V130A24CE
Figure PZ10
Figure PZ14
Figure PZ12
Figure PZ11
Figure PZ16
Figure PZ15
Figure PZ13
Figure PZ17
Figures PZ10-PZ17 Typical Performance Curves for PolyZen Devices - CE Series
-1.2
-1.0
-0.8
-0.6
-0.4
-0.2
0.0
-45 -35 -25 -15 -5
VOUTPeak (V)
IFLT RMS (A)
VOUTPeak vs. IFLT RMS (IOUT=0)
A = ZENxxxV130A24CE
B = ZENxxxVyyyA16CE
A
B
0.01
0.1
1
10
0 1 2 3 4 5 6 7 8 9 10
Time-to-Trip (s)
IFLT RMS (A)
Time-to-Trip vs. IFLT RMS (IOUT=0)
A
B
A = ZEN056VyyyA16CE
B = ZEN132VyyyA16CE
0
0.5
1
1.5
2
2.5
3
3.5
4
-40 -20 0 20 40 60 80 100
I (A)
Ambient Temperature (°C)
Temperature Effect on I (IF LT = 0)
A = ZENxxxV130A24CE
B = ZENxxxV230A16CE
C = ZENxxxV260A16CE
A
B
C
HOLD
HOLD
0.001
0.01
0.1
1
10
-45 -35 -25 -15 -5
Time-to-Trip (s)
IFLT RMS (A)
Time-to-Trip vs. IFLT RMS (IOUT=0)
A
B
A = ZENxxxV130A24CE
B = ZENxxxVyyyA16CE
0.01
0.1
1
10
0 1 2 3 4 5 6 7 8 9 10
Time-to-Trip (s)
IFLT RMS (A)
Time-to-Trip vs. IFLT RMS (IOUT=0)
AB
A = ZEN056V130A24CE
B = ZEN132V130A24CE
0.0
2.0
4.0
6.0
8.0
10.0
12.0
14.0
16.0
18.0
0 1 2 3 4 5 6 7 8 9 10
VOUTPeak (V)
IFLT RMS (A)
VOUTPeak vs. IFLT RMS(IOUT=0)
A
BA = ZEN056VyyyA16CE
B = ZEN132VyyyA16CE
0.001
0.01
0.1
1
10
0 5 10 15 20 25 30 35 40 45
Time-to-Trip (s)
IPTC RMS (A)
Time-to-Trip vs. IPTC RMS (IFLT=0)
A
B
A = ZENxxxV130A24CE
B = ZENxxxVyyyA16CE
2013_CP_S05-PolyZen.indd 36 8/3/13 11:10 AM
RoHS Compliant, ELV Compliant
PolyZen Devices
RoHS Compliant, ELV Compliant 37
5
Operating temperature range -40° to +85°C
Storage temperature -40° to +85°C
ESD withstand 15kV Human body model
Diode capacitance 4200pF Typical @ 1MHz, 1V RMS
Construction RoHS compliant
35
30
25
20
15
10
5
0
350
300
250
200
150
100
50
0
0 0.01 0.02 0.03 0.04 0.05 0.06 0.07 0.08
Voltage (V) and Current (A)
Power (Watts)
Time (s)
Hot-Plug Response
ZEN056V130A24LS vs. a 22V/120W Universal Power Supply
Capacitive
Current Spike
VOUT Peak
Current Pulled to
GND via Diode
Supply Voltage
Dropped by Current
Supply Voltage
Returns to Normal
PPTC Switches to
High Resistance
Output Voltage
Remains Clamped
A
A
D
D
B
B
C
C
A = VIN
B = VOUT
C = CURRENT (IFLT)
D = POWER
Figure PZ18
24
22
20
18
16
14
12
10
8
6
4
2
0
Voltage (V) or Current (A)
Typical Fault Response: ZEN059V130A24LS
24V, 6A Current Limited Source (IOUT=0)
0.02 0.05 0.10 0.15
Time (s)
A
B
C
A = VIN (V)
B = VOUT (V)
C = IFLT (A)
Figure PZ20
20
18
16
14
12
10
8
6
4
2
0
-0.02 0.02 0.06 0.10 0.14 0.18
Voltage (V) or Current (A)
Typical Fault Response: ZEN056V1xxA24LS
20V, 3.5A Current Limited Source (IOUT=0)
Time (s)
A
B
C
A = VIN (V)
B = VOUT (V)
C = IFLT (A)
Figure PZ19
24
22
20
18
16
14
12
10
8
6
4
2
0
Voltage (V) or Current (A)
Typical Fault Response: ZEN098V130A24LS
24V, 3.5A Current Limited Source (IOUT=0)
0 0.05 0.10 0.15
Time (s)
A = VIN (V)
B = VOUT (V)
C = IFLT (A)
A
B
C
Figure PZ22
26
24
22
20
18
16
14
12
10
8
6
4
2
0
Voltage (V) or Current (A)
Typical Fault Response: ZEN065V130A24LS
24V, 5.0A Current Limited Source (IOUT=0)
0 0.01 0.02 0.03 0.04 0.05 0.06 0.07 0.08 0.09 0.10
Time (s)
A = VIN (V)
B = VOUT (V)
C = IFLT (A)
A
B
C
Figure PZ21
Table PZ3 General Characteristics for PolyZen Devices
Figures PZ18-PZ22 Basic Operation Examples for PolyZen Devices - LS Series
2013_CP_S05-PolyZen.indd 37 8/3/13 11:10 AM
5
RoHS Compliant, ELV CompliantRoHS Compliant, ELV Compliant
38
5
18
16
14
12
10
8
6
4
2
0
Voltage (V) or Current (A)
Typical Fault Response: ZEN098V230A16LS
16V, 3.5A Current Limited Source (IOUT=0)
0 0.05 0.10 0.15 0.20
Time (s)
A = VIN (V)
B = VOUT (V)
C = IFLT (A)
A
B
C
Figure PZ27
20
15
10
5
0
Voltage (V) or Current (A)
Typical Fault Response: ZEN056V230A16LS
16V, 5.0A Current Limited Source (IOUT=0)
0 0.10 0.20 0.30
Time (s)
A = VIN (V)
B = VOUT (V)
C = IFLT (A)
A
B
C
Figure PZ25
30
25
20
15
10
5
0
Voltage (V) or Current (A)
Typical Fault Response: ZEN164V130A24LS
24V, 1.0A Current Limited Source (IOUT=0)
0 0.10 0.20 0.30 0.40 0.50
Time (s)
A = VIN (V)
B = VOUT (V)
C = IFLT (A)
A
B
C
Figure PZ24
30
25
20
15
10
5
0
Voltage (V) or Current (A)
Typical Fault Response: ZEN132V130A24LS
24V, 2.0A Current Limited Source (IOUT=0)
0 0.05 0.10 0.15 0.20 0.25 0.30 0.35 0.40 0.45 0.50
Time (s)
A = VIN (V)
B = VOUT (V)
C = IFLT (A)
A
B
C
Figure PZ23
50
40
30
20
10
0
Voltage (V) or Current (A)
Typical Fault Response: ZEN056V075A48LS
48V, 10.0A Current Limited Source (IOUT=0)
0 0.020.01 0.03 0.04
Time (s)
A = VIN (V)
B = VOUT (V)
C = IFLT (A)
A
B
C
Figure PZ29
Voltage (V) or Current (A)
22
20
18
16
14
12
10
8
6
4
2
0
Typical Fault Response: ZEN132V230A16LS
20V, 2.0A Current Limited Source (IOUT=0)
0 0.05 0.10 0.15 0.20 0.25 0.30
Time (s)
A = VIN (V)
B = VOUT (V)
C = IFLT (A)
A
B
C
Figure PZ28
20
15
10
5
0
Voltage (V) or Current (A)
Typical Fault Response: ZEN065V230A16LS
16V, 3.5A Current Limited Source (IOUT=0)
0 0.10 0.20 0.30
Time (s)
A = VIN (V)
B = VOUT (V)
C = IFLT (A)
A
B
C
Figure PZ26
50
45
40
35
30
25
20
15
10
5
0
Voltage (V) or Current (A)
Typical Fault Response: ZEN132V075A48LS
48V, 2.0A Current Limited Source (IOUT=0)
A = VIN (V)
B = VOUT (V)
C = IFLT (A)
0 0.02 0.04 0.06 0.08 0.10 0.12 0.14 0.16 0.18 0.20
Time (s)
A
B
C
Figure PZ30
Figures PZ23-PZ30 Basic Operation Examples for PolyZen Devices - LS Series Cont’d
2013_CP_S05-PolyZen.indd 38 8/3/13 11:10 AM
5
RoHS Compliant, ELV Compliant
PolyZen Devices
RoHS Compliant, ELV Compliant 39
5
Figure PZ31
Figures PZ31-PZ35 Basic Operation Examples for PolyZen Devices - CE Series
Figure PZ33Figure PZ32
Figure PZ35Figure PZ34
0
4
8
12
16
20
24
28
0.00 0.05 0.10 0.15 0.20
Voltage (V) or Current (A)
Time (s)
Typical Fault Response: ZEN132V130A24CE
24V, 3A Current Limited Source (IOUT=0)
A
B
C
A = V
IN
(V)
B = V
OUT
(V)
C = I
OUT
(A)
0
4
8
12
16
20
0.00 0.05 0.10 0.15 0.20
Voltage (V) or Current (A)
Time (s)
Typical Fault Response: ZEN056V260A16CE
16V, 5A Current Limited Source (IOUT=0)
A
B
C
A = VIN (V)
B = VOUT (V)
C = IOUT (A)
0
4
8
12
16
20
24
28
0.00 0.05 0.10 0.15 0.20
Voltage (V) or Current (A)
Time (s)
Typical Fault Response: ZEN056V130A24CE
24V, 10A Current Limited Source (IOUT=0)
A
B
C
A = VIN (V)
B = VOUT (V)
C = IOUT (A)
0
4
8
12
16
20
0.00 0.05 0.10 0.15 0.20
Voltage (V) or Current (A)
Time (s)
Typical Fault Response: ZEN056V230A16CE
16V, 5A Current Limited Source (IOUT=0)
A
B
C
A = VIN (V)
B = VOUT (V)
C = IOUT (A)
Hot-Plug Response
ZEN056V130A24CE vs. a 22V/120W Universal Power Supply
A= V IN
B= V OUT
C= CURRENT (I FLT )
D= POWER
Capacitive
Current Spike
Current Pulled to
GND via Diode
Supply Voltage
Dropped by Current
V
OUT Peak
PPTC Switches to
High Resistance
Output Voltage
Remains Clamped
Supply Voltage
Returns to Normal
Voltage (V) and Current (A)
Power (Watts)
35
30
25
20
15
10
5
0
350
300
250
200
150
100
50
0
Time (s)
0.005 0.01 0.015 0.02 0.025 0.03 0.035 0.040
A
A
D
D
BB
C
C
2013_CP_S05-PolyZen.indd 39 8/3/13 11:10 AM
RoHS Compliant, ELV Compliant
RoHS Compliant, ELV Compliant
40
5
Figure PZ37Figure PZ36
Part Number Bag Quantity Tape & Reel Quantity Standard Package
ZENxxxVyyyAzzLS - 3,000 15,000
ZENxxxVyyyAzzCE - 4,000 20,000
mm 3.85 4.15 3.85 4.15 1.40 2.00
in (0.152) (0.163) (0.152) (0.163) (0.055) (0.081)
A
Min Max
B
Min Max
C
Min Max
C
B
A
ZENxxxVyyyAzzLS Devices
mm 4.80 5.20 3.80 4.20 0.80 1.20
in (0.189) (0.205) (0.150) (0.165) (0.031) (0.047)
A
Min Max
B
Min Max
C
Min Max
ZENxxxVyyyAzzCE Devices
Table PZ4 Packaging and Marking Information for PolyZen Devices
Table PZ5 Dimensions for PolyZen Devices in Millimeters and (Inches)
Figures PZ36-PZ37 Basic Operation Examples for PolyZen Devices - CE Series Cont’d
0
4
8
12
16
20
24
0.00 0.05 0.10 0.15 0.20
Voltage (V) or Current (A)
Time (s)
Typical Fault Response: ZEN132V230A16CE
20V, 3A Current Limited Source (IOUT=0)
A
B
C
A = VIN (V)
B = VOUT (V)
C = IOUT (A)
0
4
8
12
16
20
24
0.00 0.05 0.10 0.15 0.20
Voltage (V) or Current (A)
Time (s)
Typical Fault Response: ZEN132V260A16CE
20V, 3A Current Limited Source (IOUT=0)
A
B
C
A = VIN (V)
B = VOUT (V)
C = IOUT (A)
A
B
C
2013_CP_S05-PolyZen.indd 40 8/3/13 11:10 AM
RoHS Compliant, ELV Compliant
PolyZen Devices
RoHS Compliant, ELV Compliant 41
5
Pin Number Pin Name Pin Function
1 VIN VIN = Protected input to Zener diode
2 GND GND = Ground
3 VOUT VOUT = Zener regulated voltage output
2 GND
3 VOUT
VIN 1
Pin Configuration
(Top View)
2.21mm
(0.087”)
0.56mm
(0.022”)
2.88mm
(0.1135”)
0.56mm
(0.022”)
0.33mm
(0.013”)
0.94mm
(0.037”)
0.94mm
(0.037”)
Pad Dimensions
Solder Reflow and Rework Recommendation for PolyZen Devices
Critical Zone
TL to Tp
Ramp Up
t 25˚C to Peak
Reflow Profile Time
Ramp Down
ts
Preheat
Ts MAX
TL
Tp
tp
25
Ts MIN
tL
Temperature
Figure PZ38
Classification Reflow Profiles
Profile Feature Pb-Free Assembly
Average Ramp Up Rate (TsMAX to Tp) 3°C/ s Max
Preheat
• Temperature Min (TsMIN) 150°C
• Temperature Max (TsMAX) 200°C
• Time (ts Preheat) 60-180 s
Time Maintained Above:
• Temperature (TL) 217°C
• Time (tL) 60-150 s
Peak/Classification Temperature (Tp) 260°C
Time within 5°C of Actual Peak Temperature
Time (tp) 20-40 s
Average Ramp Down Rate (Tp to TL) 6°C/ s Max
Time 25°C to Peak Temperature 8 Minutes Max
Note: All temperatures refer to the top side of the package, measured on the package body surface.
Table PZ6 Pad Layout and Configuration Information for PolyZen Devices
ZENxxxVyyyAzzLS Devices
ZENxxxVyyyAzzCE Devices
Pin Number Pin Name Pin Function
1 VIN VIN = Protected input to Zener diode
2 GND GND = Ground
3 VOUT VOUT = Zener regulated voltage output
2
GND
3
VOUT
1
VIN
2-0.50+/-0.05
1.12+/-0.05
3.80+/-0.05
2.21+/-0.05
2-1.20+/-0.05
3.00+/-0.05
2-0.40+/-0.015
0.72+/-0.015
3.80+/-0.015
1.81+/-0.015
2-0.80+/-0.015
3.00+/-0.015
2013_CP_S05-PolyZen.indd 41 8/3/13 11:10 AM
RoHS Compliant, ELV Compliant
RoHS Compliant, ELV Compliant
42
5
ZEN 056V 130A 24 LS & CE
Special Labeling
LS = Module Height of 1.7mm typical
CE = Module Height of 1.0mm typical
VINT Max Rating (24 = 24V)
PPTC Hold Current Group (130 = 1.3A)
Zener Voltage Group (056 = 5.6V)
PolyZen Series
Part Numbering System for PolyZen Devices
102.0 Ref
NMin
AMax
W2 (measured at hub)
W1 (measured at hub)
Matte Finish These Areas
Lock Feature (6 places)
See “Detail A”
Detail A
ø20.0 Min.
ø13.0 +0.5
0.2
2.0 +/– 0.5
330.0 +0.25
4.00
Description Dimension (mm)
AMax 330
NMin 102
W1 8.4
W2 11.1
Figure PZ40 Reel Dimensions for PolyZen Devices in Millimeters (mm)
A0
B0
K0
2.00 ± 0.05Note 2
0.35 ± 0.05
4.00Note 1
8.00
ø1.5 + 0.1 / -0.0
ø1.50 Min
0.25 R
0.25
12.0 ± 0.3
5.50 ± 0.05Note 3
1.75 ± 0.10
A
A
R 0.3 Max
Notes:
1. 10 sprocket hole pitch cumulative tolerance ±0.2
2. Camber in compliance with EIA 481
3. Pocket position relative to sprocket hole measured as true position of pocket, not pocket hole
Tape and Reel Specifications for PolyZen Devices in Millimeters
Figure PZ39 EIA Referenced Taped Component Dimensions for PolyZen Devices in Millimeters (mm)
Description ZENxxxVyyyAzzLS Devices ZENxxxVyyyAzzCE Devices
A0 4.35 4.35
B0 4.35 5.35
K0 2.30 1.35
2013_CP_S05-PolyZen.indd 42 8/3/13 11:10 AM
RoHS Compliant, ELV Compliant
PolyZen Devices
RoHS Compliant, ELV Compliant 43
5
Notice :
Part Marking System for PolyZen Devices
tnnn
12345
Zener Diode Voltage Rating
nnn = 056 (5.6V)
nnn = 059 (5.9V)
nnn = 065 (6.5V)
nnn = 098 (9.8V)
nnn = 134 (13.4V)
nnn = 164 (16.4V)
Batch Number
ZENxxxVyyyAzzLS Devices
ZENxxxVyyyAzzCE Devices
Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability of and test each
product selected for their own applications. Tyco Electronics Corporation and its affiliates in the TE Connectivity Ltd. group of companies (“TE”)
reserve the right to change or update, without notice, any information contained in this publication; to change, without notice, the design,
construction, processing, or specification of any product; and to discontinue or limit production or distribution of any product. This publication
supersedes and replaces all information previously supplied. Without express written consent by an officer of TE, TE does not authorize the use of
any of its products as components in nuclear facility applications, aerospace, or in critical life support devices or systems. TE expressly disclaims
all implied warranties regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or fitness
for a particular purpose. TE’s only obligations are those in the TE Standard Terms and Conditions of Sale and in no case will TE be liable for any
incidental, indirect, or consequential damages arising from the sale, resale, use, or misuse of its products.
VVVII
####
Markings Vz Hold Current Batch Number
05613 5.6V 1.3A
##### Last 4 digits of batch number
2013_CP_S05-PolyZen.indd 43 8/3/13 11:10 AM
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
TE Connectivity:
ZEN132V230A16LS