CPH3110-TL-E - ON SEMICONDUCTOR

CPH3110 / CPH3210

No.6079-1/5

Applications

•Relay drivers, lamp drivers, motor drivers, flash.

Features

•Adoption of MBIT processes.

•High current capacitance.

•Low collector-to-emitter saturation voltage.

•High-speed switching.

•Ultrasmall package facilitates miniaturization in end products (mounting height : 0.9mm).

•High allowable power dissipation.

Specifications ( ) : CPH3110

Absolute Maximum Ratings at Ta=25°C

Parameter Symbol Conditions Ratings Unit

Collector-to-Base Voltage VCBO (--30)40 V

Collector-to-Emitter Voltage VCEO (--)30 V

Emitter-to-Base Voltage VEBO (--)6 V

Collector Current IC(--)5 A

Collector Current (Pulse) ICP (--)7 A

Base Current IB(--)1.2 A

Collector Dissipation PCMounted on a ceramic board (600mm2✕0.8mm) 0.9 W

Junction Temperature Tj 150 °C

Storage Temperature Tstg --55 to +150 °C

Electrical Characteristics at Ta=25°C

Ratings

Parameter Symbol Conditions min typ max Unit

Collector Cutoff Current ICBO VCB=(--)30V, IE=0 (--)0.1 µA

Emitter Cutoff Current IEBO VEB=(--)4V, IC=0 (--)0.1 µA

DC Current Gain hFE VCE=(--)2V, IC=(--)500mA 200 560

Gain-Bandwidth Product fTVCE=(--)10V, IC=(--)500mA (250)290 MHz

Output Capacitance Cob VCB=(--)10V, f=1MHz (52)40 pF

Marking : CPH3110 : AK, CPH3210 : CK Continued on next page.

SANYO Electric Co.,Ltd. Semiconductor Company

TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN

Ordering number : ENN6079A

N1504 TS IM TB-00000285 / 71299TS (KOTO) TA-2032

Any and all SANYO products described or contained herein do not have specifications that can handle

applications that require extremely high levels of reliability, such as life-support systems, aircraft's

control systems, or other applications whose failure can be reasonably expected to result in serious

physical and/or material damage. Consult with your SANYO representative nearest you before using

any SANYO products described or contained herein in such applications.

SANYO assumes no responsibility for equipment failures that result from using products at values that

exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other

parameters) listed in products specifications of any and all SANYO products described or contained

herein.

CPH3110 / CPH3210

PNP / NPN Epitaxial Planar Silicon Transistors

DC / DC Converter Applications

CPH3110 / CPH3210

No.6079-2/5

Continued from preceding page. Ratings

Parameter Symbol Conditions min typ max Unit

Collector-to-Emitter Saturation Voltage VCE(sat) IC=(--)2.5A, IB=(--)50mA

(--140)110 (--210)165

Base-to-Emitter Saturation Voltage VBE(sat) IC=(--)2.5A, IB=(--)50mA

(--0.81)0.82

(--)1.2 V

Collector-to-Base Breakdown Voltage V(BR)CBO IC=(--)10µA, IE=0 (--30)40 V

Collector-to-Emitter Breakdown Voltage V(BR)CEO IC=(--)1mA, RBE=∞(--)30 V

Emitter-to-Base Breakdown Voltage V(BR)EBO IE=(--)10µA, IC=0 (--)6 V

Turn-ON Time ton See specified Test Circuit. (30)30 ns

Storage Time tstg See specified Test Circuit. (190)320 ns

Fall T ime tfSee specified Test Circuit. (17)14 ns

Package Dimensions Switching Time Test Circuit

unit : mm

2150A

1 : Base

2 : Emitter

3 : Collector

SANYO : CPH3

0.05

0.9

0.7 0.2 1.6 0.60.6

1.9

2.8

0.2

2.9

0.15

0.4

VRRB

VCC=12VVBE= --5V

50Ω

INPUT

OUTPUT

100µF 470µF

PW=20µsIB1

D.C.≤1% IB2

20IB1= --20IB2=IC=2.5A

For PNP, the polarity is reversed.

--1.0

--2.0

--3.0

--4.0

--5.0

IC -- VCE

0 --100 --200 --300 --400 --500 100 200 300 400 500

IC -- VCE

IT08033 IT08034

5.0

4.0

3.0

2.0

1.0

CPH3110 CPH3210

1.0

IC -- VBE

0.2 0.4 0.6 0.8 0.9

00.3 0.5 0.7

0.1

0.8

0.6

0.4

0.2

0.9

0.7

0.5

0.3

0.1

IT08036

--0.1

--0.2

--0.3

--0.4

--0.5

--0.6

--0.7

--0.8

--0.9

--1.0

IC -- VBE

0 --0.2--0.1 --0.3 --0.4 --0.5 --0.6 --0.7 --0.8 --0.9

IT08035

CPH3110

VCE= --2V CPH3210

VCE=2V

Collector Current, IC -- A

Base-to-Emitter Voltage, VBE -- V

Collector-to-Emitter Voltage, VCE -- mV

Collector Current, IC -- A

Collector-to-Emitter Voltage, VCE -- mV

Collector Current, IC -- A

Base-to-Emitter Voltage, VBE -- V

Ta=75°C

25°C

--25°C

Ta=75°C

25°C

--25°C

IB=0

--10mA

20mA

--100mA

--50mA

40mA

--70mA

--80mA

--90mA

--30mA

IB=0

10mA

20mA

100mA

50mA

40mA

60mA

70mA

80mA

90mA

30mA

60mA

CPH3110 / CPH3210

No.6079-3/5

hFE -- IC

1000

23 57 23 57 23 57

--0.01 --1.0 --10--0.1

100

fT -- IC

23 57 23 57 23 5

--0.01 --1.0--0.1

1000

100

1000

100

hFE -- IC

IT08037

1000

23 57 23 57 23 57

0.01 1.0 100.1

100

IT08038

IT08039

fT -- IC

23 57 23 57 23 5

0.01 1.00.1 IT08040

100

Cob -- VCB

23 2 5357

--1.0 --10 23 2 5357

1.0 10

IT08041

Cob -- VCB

IT08042

CPH3110

VCE= --2V CPH3210

VCE=2V

CPH3110

VCE= --10V CPH3210

VCE=10V

CPH3110

f=1MHz CPH3210

f=1MHz

2 3 57 2 3 57 2 3 57

0.01 1.0 100.1

VCE(sat) -- IC

23 57 23 57 23 57

--0.01 --1.0 --10--0.1

--100

--10

100

IT08043 IT08044

CPH3110

IC / IB=20 CPH3210

IC / IB=20

Ta=75°C

--25°C

25°C

Ta=75°C

--25°C

25°C

Ta=75°C

--25°C

Ta=75°C

--25°C

25°C

DC Current Gain, hFE

Collector Current, IC -- A

DC Current Gain, hFE

Collector Current, IC -- A

Gain-Bandwidth Product, fT -- MHz

Collector Current, IC -- A

Gain-Bandwidth Product, fT -- MHz

Collector-to-Base Voltage, VCB -- V

Output Capacitance, Cob -- pF

Collector-to-Base Voltage, VCB -- V

Output Capacitance, Cob -- pF

Collector Current, IC -- A

Collector-to-Emitter

Saturation Voltage, VCE(sat) -- mV

Collector Current, IC -- A

Collector-to-Emitter

Saturation Voltage, VCE(sat) -- mV

Collector Current, IC -- A

CPH3110 / CPH3210

No.6079-4/5

2 3 57 2 3 57 2 3 57

--0.01 --1.0 --10--0.1

--100

--10

--1000

23 57 23 57 23 57

0.01 1.0 100.1

100

VCE(sat) -- IC

VBE(sat) -- IC

23 57 23 57 23 57

0.01 1.0 100.1

1000

VCE(sat) -- IC

VBE(sat) -- IC

23 57 23 57 23 57

--0.01 --1.0 --10--0.1

--1000

IT08045

IT08047

IT08046

IT08048

IT08050

00 20 40 60 80 100 120 140 160

0.2

0.6

0.8

1.0

0.4

0.9

PC -- Ta

CPH3110 / CPH3210

A S O

IT08049

0.1 1.0 10

23 57 23 2357 5

1.0

0.1

0.01

100ms

10ms

ICP=7A

IC=5A

100µs

500µs

1ms

DC operation

CPH3110

IC / IB=50 CPH3210

IC / IB=50

CPH3110

IC / IB=50 CPH3210

IC / IB=50

Ta=75°C

--25°C

25°C

Ta=75°C

--25°C

25°C

Collector-to-Emitter Voltage, VCE -- V

Collector Current, IC -- A

Ambient Temperature, Ta -- °C

Collector Dissipation, PC -- W

CPH3110 / CPH3210

Ta=25°C

Single pulse

For PNP, minus sign is omitted.

Mounted on a ceramic board (600mm

✕0.8mm)

Mounted on a ceramic board (600mm

✕0.8mm)

Collector Current, IC -- A

Collector-to-Emitter

Saturation Voltage, VCE(sat) -- mV

Collector Current, IC -- A

Collector-to-Emitter

Saturation Voltage, VCE(sat) -- mV

Collector Current, IC -- A

Base-to-Emitter

Saturation Voltage, VBE(sat) -- mV

Collector Current, IC -- A

Base-to-Emitter

Saturation Voltage, VBE(sat) -- mV

Ta= --25°C

25°C

Ta= --25

25°C

CPH3110 / CPH3210

No.6079-5/5

Specifications of any and all SANYO products described or contained herein stipulate the performance,

characteristics, and functions of the described products in the independent state, and are not guarantees

of the performance, characteristics, and functions of the described products as mounted in the customer’s

products or equipment. To verify symptoms and states that cannot be evaluated in an independent device,

the customer should always evaluate and test devices mounted in the customer’s products or equipment.

SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all

semiconductor products fail with some probability. It is possible that these probabilistic failures could

give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire,

or that could cause damage to other property. When designing equipment, adopt safety measures so

that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective

circuits and error prevention circuits for safe design, redundant design, and structural design.

In the event that any or all SANYO products(including technical data,services) described or

contained herein are controlled under any of applicable local export control laws and regulations,

such products must not be exported without obtaining the export license from the authorities

concerned in accordance with the above law.

No part of this publication may be reproduced or transmitted in any form or by any means, electronic or

mechanical, including photocopying and recording, or any information storage or retrieval system,

or otherwise, without the prior written permission of SANYO Electric Co. , Ltd.

Any and all information described or contained herein are subject to change without notice due to

product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification"

for the SANYO product that you intend to use.

Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not

guaranteed for volume production. SANYO believes information herein is accurate and reliable, but

no guarantees are made or implied regarding its use or any infringements of intellectual property rights

or other rights of third parties.

This catalog provides information as of November, 2004. Specifications and information herein are subject

to change without notice.