COMMUNICATIONS COMPONENTS APETM Microwave Analog Intensity Modulator Key Features * Low drive voltage * Direct current (DC) to 20 GHz operation * Low optical insertion loss * High optical power operation * 1300 nm and 1550 nm models Applications * Antenna remoting * Short pulse experimentation This high performance analog modulator is designed for use in microwave fiberoptic links that operate at frequencies to 20 GHz and beyond. APE optical waveguides and velocity matched transmission line technology are combined in a modulator that offers high power, low loss optical characteristics, and high modulation efficiency. APE microwave analog intensity modulators are available for operation at wavelengths of 1300 nm and 1550 nm. NORTH AMERICA : 800 498-JDSU (5378) WORLDWIDE : +800 5378-JDSU WEBSITE : www.jdsu.com APE MICROWAVE ANALOG INTENSITY MODULATOR 2 Typical Frequency Response, S21 Relative Detected RF (dBe) -42 -43 -44 -45 -46 -47 -48 -49 -50 0 4.00E+09 8.00E+09 1.20E+10 1.60E+10 2.00E+10 Frequency (GHz) Typical Return Loss Curve, S11 Relative Detected RF (dBe) 0 -5 -10 -15 -20 -25 -30 -35 0 4.00E+09 8.00E+09 1.20E+10 Frequency (GHz) S21 Roll-Off Relative to 130 MHz Frequency (GHz) Maximum (dBe) 0.13 3 5 9 12 18 20 0 -1 -2 -3 -4.5 -6 -7 1.60E+10 2.00E+10 APE MICROWAVE ANALOG INTENSITY MODULATOR 3 APETM Microwave Analog Intensity Modulator Package Dimensions (Specifications in inches unless otherwise noted.) 4.92 .551 IN .317 RF DC OUT .936 2X .197 .440 2X .250 .250 .200 .075 .846 2.445 3.390 1.916 .077 .640 .709 .480 2X .158 O.079 2X .354 2.885 #2-56 TAP APE MICROWAVE ANALOG INTENSITY MODULATOR 4 Specifications Parameter Optical (note1) Operating wavelength Insertion loss (note2) On/off extinction ratio Optical return loss Electrical (note1) RF port RF input power V at 1 GHz (note3) Impedance Bias port V at DC Impedance Deviation from quadrature (note4) General Material Crystal orientation Mechanical Input optical power Electrical connectors (package) Fibers 1320 nm device, PM input 1320 nm device, SM output 1550 nm device, PM input 1550 nm device, SM output Environmental Operating temperature Storage temperature AM-130 Minimum Maximum Minimum Maximum AM-150 132010 nm 155010 nm 5.0 dB 20 dB -45 dB Maximum Maximum Typical 5.5 V 27 dBm Maximum 10.5 V 6.0 V 50 12 V >100 k 1 V Lithium niobate X-cut, y-propagating Maximum 200 mW SMA connectors Fujikura SM 13-P-7/125-UV/UV-100 SMF-28 Fujikura SM 15-P-8/125-UV/UV-100 SMF-28 0 to 70 C -40 to 85 C Note: Specifications are subject to change without notice. All device specifications are at room temperature and at beginning of life. These devices are offered as limited production models. Telcordia qualification of this device is not planned at this time. 1. All measurements made at 23 C unless otherwise noted. 2. Optical loss is measured at the maximum of the modulator's transfer function and does not include the 3 dB loss incurred when operated at quadrature. 3. V is specified at the modulator. P is the power required to generate V/2 at the connector. 4. Optimum distortion performance may require bias control. APE MICROWAVE ANALOG INTENSITY MODULATOR Ordering Information For more information on this or other products and their availability, please contact your local JDSU account manager or JDSU directly at 1-800-498-JDSU (5378) in North America and +800-5378-JDSU worldwide or via e-mail at customer.service@jdsu.com. Sample: 10022054 Product Code 10022054 10020461 10020462 10020465 Description 1310 nm, no optical connectors 1310 nm, FC/PC optical connectors 1550 nm, no optical connectors 1550 nm, FC/PC optical connectors SMF-28, Fujikura SM 13-P-7/125-UV/UV-100, and Fujikura SM 15-P-8/125-UV/UV-100 are registered trademarks of Corning Incorporated. All statements, technical information and recommendations related to the products herein are based upon information believed to be reliable or accurate. However, the accuracy or completeness thereof is not guaranteed, and no responsibility is assumed for any inaccuracies. The user assumes all risks and liability whatsoever in connection with the use of a product or its application. JDSU reserves the right to change at any time without notice the design, specifications, function, fit or form of its products described herein, including withdrawal at any time of a product offered for sale herein. JDSU makes no representations that the products herein are free from any intellectual property claims of others. Please contact JDSU for more information. JDSU and the JDSU logo are trademarks of JDS Uniphase Corporation. Other trademarks are the property of their respective holders. (c)2006 JDS Uniphase Corporation. All rights reserved. 10131957 Rev. 002 02/06 APEMICROANAMOD.DS.CC.AE NORTH AMERICA : 800 498-JDSU (5378) WORLDWIDE : +800 5378-JDSU WEBSITE : www.jdsu.com