M22-K10 - EATON - Datasheet.Live

DATASHEET - M22-K10

Contact element, Screw terminals, Front ﬁxing, 1 N/O, 24 V 3 A, 220 V 230

V 240 V 6 A

Part no. M22-K10

Catalog No. 216376

Alternate Catalog

No.

M22-K10Q

EL-Nummer

(Norway)

4355363

Delivery program

Product range   Accessories

Basic function accessories   Contact elements

Accessories   Auxiliary contact

Accessories   Standard auxiliary contact, trip-indicating auxiliary switch

Standard/Approval   UL/CSA, IEC

Construction size   NZM1/2/3/4

Connection technique   Screw terminals

Fixing   Front ﬁxing

Degree of Protection   IP20

Connection to SmartWire-DT   no

For use with   NZM1(-4), 2(-4), 3(-4), 4(-4)

PN1(-4), 2(-4), 3(-4)

N(S)1(-4), 2(-4), 3(-4), 4(-4)

Approval  

Contacts   

N/O = Normally open   1 N/O

Contact sequence  

Contact travel diagram, stroke in connection with front

element

  

Contact diagram  

12/29/2020 Eaton 216376 ED2020 V75.0 EN 1 / 6

Conﬁguration  

Connection type   Single contact

Description of HIA trip-indicating auxiliary contact   General trip indication '+', when tripped by shunt release, overload release, short-

circuit release or by the residual-current release due to residual-current.

Can be used with NZM1, 2, 3 circuit-breaker: a trip-indicating auxiliary contact can

be clipped into the circuit-breaker.

Can be used with NZM4 circuit-breaker: up to two standard auxiliary contacts can

be clipped into the circuit-breaker.

Any combinations of the auxiliary contact types are possible.

Not in combination with switch-disconnector PN…

Marking on switch: HIA

Labeling in FI-Block: HIAFI.

If the trip-indicating auxiliary switch in the fault current block is used, the NC

contacts operates as a N/O contact and the NC contact operates as an N/O

contact.

Description standard auxiliary contact HIN   Switching with the main contacts Used for indicating and interlocking tasks.

Can be used with NZM1 circuit-breaker: a standard auxiliary contact can be

clipped into the circuit-breaker.

Can be used with NZM2 size circuit-breaker: a standard auxiliary contact can be

clipped into the circuit-breaker.

Can be used with NZM3, 4 circuit-breaker: up to three standard auxiliary contacts

can be clipped into the circuit-breaker.

Any combinations of the auxiliary contact types are possible.

Marking on switch: HIN.

On combination with remote operator NZM-XR... the right mounting location of

standard auxiliary contact HIN can be ﬁtted only with individual contacts.

Connection technique   Screw terminals

Notes

For Std. pack:

M22‐(C)K… : Std. pack = 20 oﬀ

Notes

The following can be clipped into the switches:

• NZM1: a standard auxiliary contact

• NZM2: up to two M22-(C)K… standard auxiliary contacts

• NZM3: up to three M22-(C)K… standard auxiliary contacts

• NZM4: up to three M22-(C)K… standard auxiliary contacts

Any combinations of the auxiliary contact types are possible.

Marking on switch: HIN

In combination with remote operator NZM‐XR… only single contacts can be ﬁtted to some installation locations of the standard auxiliary contact.

NZM2: Only single contact can be ﬁtted in left installation location of standard auxiliary contact.

NZM3: Only single contact can be ﬁtted in installation locations of standard auxiliary contact.

NZM4: Only single contact can be ﬁtted in right installation location of standard auxiliary contact.

Technical data

General

Standards   IEC 60947-5-1

Lifespan, mechanical Operations x 106> 5

Operating frequency Operations/h  ≦ 3600

Actuating force  n ≦ 5

Operating torque (screw terminals)  Nm ≦ 0.8

Degree of Protection   IP20

Climatic prooﬁng   Damp heat, constant, to IEC 60068-2-78

Damp heat, cyclic, to IEC 60068-2-30

Ambient temperature   

Open  °C -25 - +70

Mechanical shock resistance to IEC 60068-2-27 Shock duration 11 ms, half-

sinusoidal

 g > 30

Terminal capacities  mm2

Solid  mm20.75 - 2.5

Stranded  mm20.5 - 2.5

Flexible with ferrule  mm20.5 - 1.5

Contacts

Rated impulse withstand voltage Uimp V AC 6000

12/29/2020 Eaton 216376 ED2020 V75.0 EN 2 / 6

Rated insulation voltage UiV 500

Overvoltage category/pollution degree   III/3

Control circuit reliability   

at 24 V DC/5 mA HFFault

probability

< 10-7 (i.e. 1 failure to 107 operations)

at 5 V DC/1 mA HFFault

probability

< 5 x 10-6 (i.e. 1 failure in 5 x 106 operations)

Max. short-circuit protective device   

Fuseless  Type PKZM0-10/FAZ-B6/1

Fuse gG/gL A 10

Switching capacity

Rated operational current IeA 

AC-15   

115 V IeA 6

220 V 230 V 240 V IeA 6

380 V 400 V 415 V IeA 4

500 V IeA 2

DC-13   

24 V IeA 3

42 V IeA 1.7

60 V IeA 1.2

110 V IeA 0.6

220 V IeA 0.3

Lifespan, electrical   

AC-15   

230 V/0.5 A Operations x 1061.6

230 V/1.0 A Operations x 1061

230 V/3.0 A Operations x 1060.7

DV-13   

12 V/2.8 A Operations x 1061.2

Auxiliary contacts

Rated operational voltage UeV 

Rated operational voltage Ue V AC 500

Rated operational voltage, max. Ue V DC 220

Conventional thermal current Ith = IeCSA 4

Rated operational current IeA 

Diﬀerent rated operational currents when used as auxiliary contact for NZM

circuit-breaker

  M22-

(C)K10(01)

M22-

CK11(02)

(20)

XHIV

bei

AC =

50/60

Bemessungsbetriebsstrom         

  AC-15115

 Ie  A  4  4  4

   230

 Ie  A  4  4  4

   400

 Ie  A  2  -  2

   500

 Ie  A  1  -  1

  DC-1324 V  Ie  A  3  3  3

   42 V  Ie  A  1.7  1  1.5

   60 V  Ie  A  1.2  0.8  0.8

   110

 Ie  A  0.6  0.5  0.5

   220

 Ie  A  0.3  0.2  0.2

Short-circuit protection   

max. fuse  A gG/gL 10

Max. miniature circuit-breaker  A FAZ-B6/B1

Operating times   

12/29/2020 Eaton 216376 ED2020 V75.0 EN 3 / 6

   Early-make time of the HIV compared to the main contacts during with make and

break switching.

(switch times with manual operation):

NZM1, PN1, N(S)1: ca. 20 ms

NZM2, PN2, N(S)2: ca. 20 ms

NZM3, PN3, N(S)3: ca. 20 ms

NZM4, N(S)4: approx. 90 ms, the HIV switch early Oﬀswitching not forward.

Terminal capacities  mm2

Solid or ﬂexible conductor, with ferrule  mm21 x (0,75 - 2,5)

2 x (0,75 - 2,5)

UL/CSA   

Rated operational current IeA 5 A – 600 V AC

1 A - 250 V DC

Other technical data (sheet catalogue)   Maximum equipment and position of the internal accessories

Design veriﬁcation as per IEC/EN 61439

Technical data for design veriﬁcation   

Rated operational current for speciﬁed heat dissipation InA 6

Heat dissipation per pole, current-dependent Pvid W 0.11

Equipment heat dissipation, current-dependent Pvid W 0

Static heat dissipation, non-current-dependent Pvs W 0

Heat dissipation capacity Pdiss W 0

Operating ambient temperature min.  °C -25

Operating ambient temperature max.  °C 70

IEC/EN 61439 design veriﬁcation   

10.2 Strength of materials and parts   

10.2.2 Corrosion resistance   Meets the product standard's requirements.

10.2.3.1 Veriﬁcation of thermal stability of enclosures   Meets the product standard's requirements.

10.2.3.2 Veriﬁcation of resistance of insulating materials to normal heat   Meets the product standard's requirements.

10.2.3.3 Veriﬁcation of resistance of insulating materials to abnormal heat

and ﬁre due to internal electric eﬀects

  Meets the product standard's requirements.

10.2.4 Resistance to ultra-violet (UV) radiation   Meets the product standard's requirements.

10.2.5 Lifting   Does not apply, since the entire switchgear needs to be evaluated.

10.2.6 Mechanical impact   Does not apply, since the entire switchgear needs to be evaluated.

10.2.7 Inscriptions   Meets the product standard's requirements.

10.3 Degree of protection of ASSEMBLIES   Does not apply, since the entire switchgear needs to be evaluated.

10.4 Clearances and creepage distances   Meets the product standard's requirements.

10.5 Protection against electric shock   Does not apply, since the entire switchgear needs to be evaluated.

10.6 Incorporation of switching devices and components   Does not apply, since the entire switchgear needs to be evaluated.

10.7 Internal electrical circuits and connections   Is the panel builder's responsibility.

10.8 Connections for external conductors   Is the panel builder's responsibility.

10.9 Insulation properties   

10.9.2 Power-frequency electric strength   Is the panel builder's responsibility.

10.9.3 Impulse withstand voltage   Is the panel builder's responsibility.

10.9.4 Testing of enclosures made of insulating material   Is the panel builder's responsibility.

10.10 Temperature rise   The panel builder is responsible for the temperature rise calculation. Eaton will

provide heat dissipation data for the devices.

10.11 Short-circuit rating   Is the panel builder's responsibility. The speciﬁcations for the switchgear must be

observed.

10.12 Electromagnetic compatibility   Is the panel builder's responsibility. The speciﬁcations for the switchgear must be

observed.

10.13 Mechanical function   The device meets the requirements, provided the information in the instruction

leaﬂet (IL) is observed.

Technical data ETIM 7.0

Low-voltage industrial components (EG000017) / Auxiliary contact block (EC000041)

Electric engineering, automation, process control engineering / Low-voltage switch technology / Component for low-voltage switching technology / Auxiliary switch block

(ecl@ss10.0.1-27-37-13-02 [AKN342013])

12/29/2020 Eaton 216376 ED2020 V75.0 EN 4 / 6

Number of contacts as change-over contact   0

Number of contacts as normally open contact   1

Number of contacts as normally closed contact   0

Number of fault-signal switches   0

Rated operation current Ie at AC-15, 230 V  A 6

Type of electric connection   Screw connection

Model   Top mounting and integrable

Mounting method   Front fastening

Lamp holder   None

Approvals

Product Standards   IEC/EN 60947-5; UL 508; CSA-C22.2 No. 14-05; CSA-C22.2 No. 94-91; CE marking

UL File No.   E29184

UL Category Control No.   NKCR

CSA File No.   012528

CSA Class No.   3211-03

North America Certiﬁcation   UL listed, CSA certiﬁed

Degree of Protection   UL/CSA Type: -

Dimensions

A = 37.2

Pushbutton with M22-(C)K…

Pushbutton with M22-(C) LED… + M22-XLED…

12/29/2020 Eaton 216376 ED2020 V75.0 EN 5 / 6

Additional product information (links)

IL04716002Z (AWA1160-1745) RMQ-Titan System

IL04716002Z (AWA1160-1745) RMQ-Titan

System

https://es-assets.eaton.com/DOCUMENTATION/AWA_INSTRUCTIONS/IL04716002Z2020_09.pdf

DGUV Test Mark Customer Information http://www.dguv.de/medien/dguv-test-medien/_pdf_zip_doc_ppt/agb-und-pzo/dguv_test_zeichen_infoblatt_kunden.pdf

Maximum equipment and position of the

internal accessories

http://ecat.moeller.net/ﬂip-cat/?edition=HPLEN&startpage=17.178

12/29/2020 Eaton Industries GmbH

http://www.eaton.eu

Eaton 216376 ED2020 V75.0 EN

6 / 6