SPECIFICATION Part No. : MA.208.A.A301111.B305111 Product Name : GPS and LTE/GSM/UMTS (2G/3G/4G 700Mhz to 960MHz/1710MHz to 2200MHz) Combination Antenna Description SPE-11-8-044/A Adhesive Mount IP67 Antenna GPS: 3M RG-174 SMA(M) Cellular: 3M CFD-200 SMA(M) 1.8~5.5V/30dB 200.5*66.5*9mm RoHS Compliant 20-July-11 Page 1 of 1 1.0 Introduction The Bar MA.208 GPS/LTE Cellular antenna is a low profile, heavy-duty, fully IP67 waterproof external M2M antenna for use by RF professionals in telematics, transportation and remote monitoring applications. The Bar is unique in the market as it combines the highest possible efficiency and peak gain for GPS and all cellular bands in 2G/3G/4G in a low profile compact format for mounting via high quality first tier automotive approved 3M adhesive foam. The patent pending design incorporates internally a custom Taoglas 35mm patch antenna on an extended integral ground-plane to deliver more than 3.5dBiC gain. A front-end SAW filter dramatically reduces radiated spurious emissions. The extended ground-plane used with an innovative internal cellular PIFA also enables the unique wide-band 2G/3G/4G response to deliver the highest performance possible, at 3 metres cable length. Nothing else out there comes close in terms of consistency of efficiency and peak gain at all cellular bands, with an awesome 70%+ at the LTE 700MHz band, again including 3 metres of cable loss. High antenna efficiencies are absolutely critical in today's 3G and 4G systems to achieving targeted dataspeeds and coverage. All this is done while still maintaining 20dB isolation between antennas. The Bar uses highshielded PTFE dielectric ultra low-loss cables that maintain low attenuation at all frequency bands, and high noise rejection, with an average loss of only 0.3dB per meter (0.1dB per foot), compared to 0.7dB for RG58 and 1.2dB for RG174. Because of this, the Bar maximizes chances of passing PTCRB and network approvals first time. The Bar works best when attached to plastic or glass, but can also be used on metal if some foam spacing is added. SPE-11-8-044/A 20-July-11 Page 2 of 2 2.0 System Configuration This antenna specification covers the LTE/GSM/UMTS Full band for 700MHz~960MHz 1710MHz~2170MHz and GPS (L1 Band). SPE-11-8-044/A 20-July-11 Page 3 of 3 3.0 Antenna Specification Performance Specifications Items GPS Antenna Cellular Antenna LTE - 700MHz Features High performance GPS 35*35*4mm ceramic patch antenna with two stage high gain LNA 1575.42 +/- 1.023MHz CDMA: 824-896 MHz GSM: 880-960 MHz DCS: 1710-1880 MHz PCS: 1850-1990 MHz 3G: 1920-2170MHz Average: - -3.03dBi at 700- 960MHz Gain -4.34dBi at 1710 - 2170MHz 3.5dBic typ @ Zenith Peak: 2.16dBi at 700 - 960MHz 0.42dBi at 1710 - 2170MHz Polarization RHCP Linear 3.3 Max. at 700- 960MHz 3.6 Max. at 1710- 1850MHz 2.2 Max. at 1880-2170MHz 50 50 68% @ 700MHz, 72% @ 750MHz, 66% @ 824MHz, 56% @ 890MHz, 61% @ 880MHz, 53% @ 960MHz, 37% @1710MHz, 51% @1880MHz, 55% @1990MHz, 54% @2110MHz, 45% @2170MHz VSWR Impedance Efficiency Cable / Connector 3m RG-174 Cable SMA(M) connector Fully Customisable CFD-200 with SMA(M) Fully customisable Housing UV resistant PVC Adhesive Mount 3M 1600TB(196.57*62.57*1.25mm) Protection Class IP-67 Operation Temperature -40C to +85C Storage Temperature -40C to +85C Relative Humidity 20% to 95% Weight per unit 0.18kg *note: specifications may be subject to change SPE-11-8-044/A 20-July-11 Page 4 of 4 4.0 Axial Ratio With IPEX Cable SPE-11-8-044/A 20-July-11 Page 5 of 5 3M CFD-200 Cable SPE-11-8-044/A 20-July-11 Page 6 of 6 5.0 Radiation Patterns Radiation Pattern in XZ plane SPE-11-8-044/A 20-July-11 Page 7 of 7 Radiation Pattern in YZ plane SPE-11-8-044/A 20-July-11 Page 8 of 8 Radiation Pattern in XY plane SPE-11-8-044/A 20-July-11 Page 9 of 9 6.0 VSWR SPE-11-8-044/A 20-July-11 Page 10 of 10 7.0 Efficiency 8.0 Average Gain SPE-11-8-044/A 20-July-11 Page 11 of 11 9.0 Peak Gain 10.0 LNA Frequency Range Output Impedance Output Power at 1dB Compression Point Output VSWR 1575.42+/-1.023Mhz 50 Ohm -35dBm typ. 2.0 Max. Supply Voltage Gain(Typ) Noise Figure(Typ) Power Consumption (Typ.) 1.8V 3.0V 5.5V 27.0dB 32.9dB 33.8dB 2.2dB 2.3dB 2.5dB 5.5mA 12.5mA 15.0mA SPE-11-8-044/A 20-July-11 Page 12 of 12 11.1 LNA Noise Figure at 3.0V SPE-11-8-044/A 20-July-11 Page 13 of 13 11.2 LNA Gain and Output of VSWR at 3.0V 12.0 GPS Antenna Specifications (Through Antenna, LNA and Cable Assembly) Frequency Range Gain at 3.0V Output Impedance Output VSWR SPE-11-8-044/A 1575.42+/-1.023Mhz 32.5dBic @ Zenith 50 Ohm 2.0 Max. 20-July-11 Page 14 of 14 12.1 20dB min isolation to GPS LNA input and LTE/ GSM/ UMTS ANTENNA SPE-11-8-044/A 20-July-11 Page 15 of 15 13.0 Drawing SPE-11-8-044/A 20-July-11 Page 16 of 16 Separate Adhesive Pad SPE-11-8-044/A 20-July-11 Page 17 of 17 14.0 Packing SPE-11-8-044/A 20-July-11 Page 18 of 18