Bazaar Propagate Wiki Login | Sign up
Feedback & Ideas｜Help
Bazaar / Grove / Accessories for Grove / Grove - Bee Socket
Fusion Community
Category
Search for products, brands and platforms
ADD TO CART
Description
Best-sellers
Technical Details
Questions and Answers
View History
Best-sellers
Technical Details
Dimensions 130mm x 90mm x 11mm
Weight G.W 12g
Battery Exclude
Documents
Description
Grove - Bee Socket is an adaptor of Xbee serials which can connect wireless modules with Arduino, such as
WIFI Bee, RF Bee, Bluetooth Bee, etc. It is Arduino compatible and more effective to conduct peer-
to-peer operations and mesh network runned by wireless modules. Regulator CJT1117
guareteens Xbee of stable 3.3 voltages. LEDs can reflect working modes of the Grove modules
clearly.
Grove-Bee Socket has similar functions to XBee Shield. Grove-Bee Socket and Arduino are
connected by cables, and XBee Shield is a standard adapter that can plug to Arduino.
Features
Standard Bee Socket and Grove Interface
Onboard 3.3V regulator to power your XBee
Level Shifting circuit
Reset Button for Bee modules
LEDs for Bee operations
For all Grove users (especially beginners), we provide you guidance PDF documents. Please
download and read through Preface - Getting Started and Introduction to Grove before your
using of the product.
Documents
Please visit our wiki page for more info about this product. It will be appreciated if you can help
us improve the documents, add more demo code or tutorials. For technical support, please
post your questions to ourforum.
Grove - Bee Socket
SKU 103020002
IN STOCK 12 Available
1
Base Shield V2
Grove - 4-Digit Display
Grove - I2C Hub
Grove - 4 pin Female Jump…
USD
email address
>
Copyright © 2008-2017 Seeed Development Limited All rights reserved Select Language ▼
Select Language ▼
POPULAR SEARCHES
PCB Manufacturing PCB Stencil Arduino XBee Arduino Shield Beaglebone Black Raspberry Pi Raspberry Pi Touchscreen Linkit Cubieboard Beaglebone Cape
FPGA LinkIt ONE Crazyflie 2.0 Raspberry Pi 3 Model B RF Explorer DSO Nano v3 MediaTek X20 HiKey Board rplidar raspberry pi relay RPLIDAR A2
Seeed Info
Reach Us
Distributors
Designers
Careers
Site Map
Customer Service
Contact Us
Customer Support
Technical Support
Terms and Conditions
Order Information
Shipping Information
Payment Information
Warranty and Return
Terms of use
Privacy Policy
Stay Tuned
Subscribe to get the latest product releases, activities
and tutorials from Seeed Studio.
Wiki
View History
0
Volodymyr Pavlyukevich on Oct 19,2016
Dear seeedstudio, I used Wifi Bee & XBee Carrier. I have to use this hardware & WiShield. It was ok. Today I
connect Bee Socket & Wifi Bee & Arduino Uno & Base Shield V1.3 (via UART).Upload code leads to avrdude:
stk500_recv(): programmer
Questions and Answers
Have a question about this? Ask people who own it.
Reply
upvote (0)
Alex Liu on Oct 20,2016 10:47 AM
Hi Volodymyr, did you reinstall your operation system? Drivers should be reinstalled again after your re-installing
OS. Alternating PC would also cause this problem probably. Or you need to check out whether there is something
wrong with your USB cable
Reply
upvote (0)
SHIPPING INFORMATION KNOWLEDGE BASE HELP CENTER
Logic Sniffer 16-bit Input B…
Bus Pirate v4
XC2C64A CoolRunner-II CP…
Alamode - Arduino Comp…
Contact SupportContact Support
