NTCASCWE3103F - Vishay Presicion Group

NTC Thermistors, Screw Threaded Sensors

www.vishay.com For technical questions, contact: nlr@vishay.com Document Number: 29065

106 Revision: 12-Apr-11

This document is subject to change without notice.

THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT

www.vishay.com/doc?91000

NTCASCWE3

Vishay BCcomponents

Notes

•Other R25-values and tolerances are available upon request

• Insulated leads available upon request

(1) Measured with screw mounted on an aluminium heatsink of

100 cm2, thickness 1.5 mm, in still air at Tamb =+ 25°C

FEATURES

• Easy mounting with screw

• Rugged construction

• Compliant to RoHS Directive 2002/95/EC and in

accordance to WEEE 2002/96/EC

APPLICATIONS

• Temperature measurement, sensing and control

• Suitable for surface temperature applications,

especially when a good electrical insulation and a good

thermal contact with the chassis is required

DESCRIPTION

The thermistors are made of NTC ceramic material reflow

soldered between two solid tinned copper or nickel wires

and potted in the head of passivated aluminum srew size

M4.

PACKAGING

The thermistors are packed in cardboard boxes; the

smallest packaging quantity is 100 units.

DESIGN IN SUPPORT

For complete Curve Computation, visit:

www.vishay.com/resistors-non-linear/curve-computation-list

MARKING

The last 4 digits of the 12NC code are printed on the stud in

accordance with the information in Electrical Data and

Ordering Information table.

MOUNTING

By means of a washer and M4 nut supplied with the device

or in a threaded screw hole. Applied torque shall not exceed

1.2 Nm. Leads to be soldered or crimped.

DIMENSIONS in millimeters

QUICK REFERENCE DATA

PARAMETER VALUE UNIT

Resistance value at 25 °C 1K to 470K 

Tolerance on R25-value ± 1, ± 2, ± 5 %

B25/85-value 3740 to 4570 K

Tolerance on B25/85-value ± 0.5 to ± 2.5 %

Operating temperature range at:

°CZero dissipation - 40 to + 100

Maximum power dissipation 0 to + 55

Dissipation factor (1)  23 mW/K

Maximum power dissipation 500 mW

Thermal time constant (1)  7.5 s

Min. dielectric withstanding

voltage between terminals and

Al case

1500 (1 s) VAC

Insulation resistance between

terminals and Al case min. 100 M

Weight  1.5 g

max.

8 ± 0.1

6.7

max.

Ø d

37 ± 3

5.5

min.

Component outline

ELECTRICAL DATA AND ORDERING INFORMATION

R25

(k)

TOLERANCE

ON R25 B25/85-VALUE LEADS DIAMETER Ø d

(mm)

TCR

(%/K)

SAP MATERIAL NUMBER

AND ORDERING CODE OLD 12NC CODE

1.0 ± 5 % 3528K ± 0.5 % 0.6 - 3.87 NTCASCWE3102J 2381 640 73102

2.2 ± 5 % 3977K ± 0.75 % 0.6 - 4.37 NTCASCWE3222J 2381 640 73222

4.7 ± 5 % 3977K ± 0.75 % 0.6 - 4.37 NTCASCWE3472J 2381 640 73472

10 ± 1 % 3977K ± 0.75 % 0.5 - 4.37 NTCASCWE3103F 2381 640 75103

10 ± 2 % 3977K ± 0.75 % 0.5 - 4.37 NTCASCWE3103G 2381 640 74103

10 ± 5 % 3977K ± 0.75 % 0.6 - 4.37 NTCASCWE3103J 2381 640 73103

12 ± 5 % 3740K ± 1.5 % 0.6 - 4.10 NTCASCWE3123J 2381 640 73123

15 ± 5 % 3740K ± 1.5 % 0.6 - 4.10 NTCASCWE3153J 2381 640 73153

47 ± 5 % 4090K ± 1.5 % 0.6 - 4.46 NTCASCWE3473J 2381 640 73473

100 ± 1 % 4190K ± 1.5 % 0.5 - 4.57 NTCASCWE3104F 2381 640 75104

100 ± 2 % 4190K ± 1.5 % 0.5 - 4.57 NTCASCWE3104G 2381 640 74104

100 ± 5 % 4190K ± 1.5 % 0.6 - 4.57 NTCASCWE3104J 2381 640 73104

150 ± 5 % 4370K ± 2.5 % 0.6 - 4.75 NTCASCWE3154J 2381 640 73154

470 ± 5 % 4570K ± 2 % 0.6 - 4.95 NTCASCWE3474J 2381 640 73474

Legal Disclaimer Notice

www.vishay.com Vishay

Revision: 12-Mar-12 1Document Number: 91000

Disclaimer

ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE

RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.

Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,

“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other

disclosure relating to any product.

Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or

the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all

liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,

consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular

purpose, non-infringement and merchantability.

Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical

requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements

about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular

product with the properties described in the product specification is suitable for use in a particular application. Parameters

provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All

operating parameters, including typical parameters, must be validated for each customer application by the customer’s

technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,

including but not limited to the warranty expressed therein.

Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining

applications or for any other application in which the failure of the Vishay product could result in personal injury or death.

Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree

to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and

damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay

or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to

obtain written terms and conditions regarding products designed for such applications.

No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by

any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.

Material Category Policy

Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the

definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council

of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment

(EEE) - recast, unless otherwise specified as non-compliant.

Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that

all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.