RN1401RN1406
2014-03-01
1
TOSHIBA Transistor Silicon NPN Epitaxial Type (PCT Process)
RN1401, RN1402, RN1403
RN1404, RN1405, RN1406
Switching, Inverter Circuit, Interface Circuit
and Driver Circuit Applications
z With built-in bias resistors
z Simplified circuit design
z Reduce a quantity of parts and manufacturing process
z Complementary to RN2401 to RN2406
Equivalent Circuit and Bias Resistor Values
Absolute Maximum Ratings (Ta = 25°C)
Characteristic Symbol Rating Unit
Collector-base voltage VCBO 50 V
Collector-emitter voltage
RN1401 to 1406
VCEO 50 V
RN1401 to 1404 10
Emitter-base voltage
RN1405, 1406
VEBO
5
V
Collector current IC 100 mA
Collector power dissipation PC 200 mW
Junction temperature Tj 150 °C
Storage temperature range
RN1401 to 1406
Tstg 55 to 150 °C
Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the
significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even
if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum
ratings.
Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook
(“Handling Precautions”/“Derating Concept and Methods”) and individual reliability data (i.e. reliability test
report and estimated failure rate, etc).
JEDEC TO-236MOD
JEITA SC-59
TOSHIBA 2-3F1A
Weight: 0.012g (typ.)
Unit: mm
Type No. R1 (k R2 (k
RN1401 4.7 4.7
RN1402 10 10
RN1403 22 22
RN1404 47 47
RN1405 2.2 47
RN1406 4.7 47
Start of commercial production
1983-06
RN1401RN1406
2014-03-01
2
Electrical Characteristics (Ta = 25°C)
Characteristic Symbol
Test
Circuit Test Condition Min Typ. Max Unit
ICBO VCB = 50 V, IE = 0 100
Collector cut-off
current RN1401 to 1406
ICEO
VCE = 50 V, IB = 0 500
nA
RN1401 0.82 1.52
RN1402 0.38 0.71
RN1403 0.17 0.33
RN1404
VEB = 10 V, IC = 0
0.082 0.15
RN1405 0.078 0.145
Emitter cut-off current
RN1406
IEBO
VEB = 5 V, IC = 0
0.074 0.138
mA
RN1401 30
RN1402 50
RN1403 70
RN1404 80
RN1405 80
DC current gain
RN1406
hFE V
CE = 5 V, IC = 10 mA
80
Collector-emitter
saturation voltage RN1401 to 1406 VCE (sat) I
C = 5 mA, IB = 0.25 mA 0.1 0.3 V
RN1401 1.1 2.0
RN1402 1.2 2.4
RN1403 1.3 3.0
RN1404 1.5 5.0
RN1405 0.6 1.1
Input voltage (ON)
RN1406
VI (ON) VCE = 0.2 V, IC = 5 mA
0.7 1.3
V
RN1401 to 1404 1.0 1.5
Input voltage (OFF)
RN1405, 1406
VI (OFF) VCE = 5 V, IC = 0.1 mA
0.5 0.8
V
Transition frequency RN1401 to 1406 fT VCE = 10 V, IC = 5 mA 250 MHz
Collector Output
capacitance RN1401 to 1406 Cob VCB = 10 V, IE = 0,
f = 1 MHz 3 6
pF
RN1401 3.29 4.7 6.11
RN1402 7 10 13
RN1403 15.4 22 28.6
RN1404 32.9 47 61.1
RN1405 1.54 2.2 2.86
Input resistor
RN1406
R1
3.29 4.7 6.11
k
RN1401 to 1404 0.9 1.0 1.1
RN1405 0.0421 0.0468 0.0515
Resistor ratio
RN1406
R1/R2
0.09 0.1 0.11
RN1401RN1406
2014-03-01
3
RN1401
RN1403 RN1404
RN1405 RN1406
RN1402
RN1401RN1406
2014-03-01
4
RN1401 RN1402
RN1403 RN1404
RN1405
RN1406
RN1401RN1406
2014-03-01
5
RN1401 RN1402
RN1403 RN1404
RN1405 RN1406
RN1401RN1406
2014-03-01
6
RN1401 RN1402
RN1403 RN1404
RN1405 RN1406
RN1401RN1406
2014-03-01
7
Type Name Marking
RN1401
RN1402
RN1403
RN1404
RN1405
RN1406
RN1401RN1406
2014-03-01
8
RESTRICTIONS ON PRODUCT USE
Toshiba Corporation, and its subsidiaries and affiliates (collectively "TOSHIBA"), reserve the right to make changes to the information
in this document, and related hardware, software and systems (collectively "Product") without notice.
This document and any information herein may not be reproduced without prior written permission from TOSHIBA. Even with
TOSHIBA's written permission, reproduction is permissible only if reproduction is without alteration/omission.
Though TOSHIBA works continually to improve Product's quality and reliability, Product can malfunction or fail. Customers are
responsible for complying with safety standards and for providing adequate designs and safeguards for their hardware, software and
systems which minimize risk and avoid situations in which a malfunction or failure of Product could cause loss of human life, bodily
injury or damage to property, including data loss or corruption. Before customers use the Product, create designs including the
Product, or incorporate the Product into their own applications, customers must also refer to and comply with (a) the latest versions of
all relevant TOSHIBA information, including without limitation, this document, the specifications, the data sheets and application notes
for Product and the precautions and conditions set forth in the "TOSHIBA Semiconductor Reliability Handbook" and (b) the
instructions for the application with which the Product will be used with or for. Customers are solely responsible for all aspects of their
own product design or applications, including but not limited to (a) determining the appropriateness of the use of this Product in such
design or applications; (b) evaluating and determining the applicability of any information contained in this document, or in charts,
diagrams, programs, algorithms, sample application circuits, or any other referenced documents; and (c) validating all operating
parameters for such designs and applications. TOSHIBA ASSUMES NO LIABILITY FOR CUSTOMERS' PRODUCT DESIGN OR
APPLICATIONS.
PRODUCT IS NEITHER INTENDED NOR WARRANTED FOR USE IN EQUIPMENTS OR SYSTEMS THAT REQUIRE
EXTRAORDINARILY HIGH LEVELS OF QUALITY AND/OR RELIABILITY, AND/OR A MALFUNCTION OR FAILURE OF WHICH
MAY CAUSE LOSS OF HUMAN LIFE, BODILY INJURY, SERIOUS PROPERTY DAMAGE AND/OR SERIOUS PUBLIC IMPACT
("UNINTENDED USE"). Except for specific applications as expressly stated in this document, Unintended Use includes, without
limitation, equipment used in nuclear facilities, equipment used in the aerospace industry, medical equipment, equipment used for
automobiles, trains, ships and other transportation, traffic signaling equipment, equipment used to control combustions or explosions,
safety devices, elevators and escalators, devices related to electric power, and equipment used in finance-related fields. IF YOU USE
PRODUCT FOR UNINTENDED USE, TOSHIBA ASSUMES NO LIABILITY FOR PRODUCT. For details, please contact your
TOSHIBA sales representative.
Do not disassemble, analyze, reverse-engineer, alter, modify, translate or copy Product, whether in whole or in part.
Product shall not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any
applicable laws or regulations.
The information contained herein is presented only as guidance for Product use. No responsibility is assumed by TOSHIBA for any
infringement of patents or any other intellectual property rights of third parties that may result from the use of Product. No license to
any intellectual property right is granted by this document, whether express or implied, by estoppel or otherwise.
ABSENT A WRITTEN SIGNED AGREEMENT, EXCEPT AS PROVIDED IN THE RELEVANT TERMS AND CONDITIONS OF SALE
FOR PRODUCT, AND TO THE MAXIMUM EXTENT ALLOWABLE BY LAW, TOSHIBA (1) ASSUMES NO LIABILITY
WHATSOEVER, INCLUDING WITHOUT LIMITATION, INDIRECT, CONSEQUENTIAL, SPECIAL, OR INCIDENTAL DAMAGES OR
LOSS, INCLUDING WITHOUT LIMITATION, LOSS OF PROFITS, LOSS OF OPPORTUNITIES, BUSINESS INTERRUPTION AND
LOSS OF DATA, AND (2) DISCLAIMS ANY AND ALL EXPRESS OR IMPLIED WARRANTIES AND CONDITIONS RELATED TO
SALE, USE OF PRODUCT, OR INFORMATION, INCLUDING WARRANTIES OR CONDITIONS OF MERCHANTABILITY, FITNESS
FOR A PARTICULAR PURPOSE, ACCURACY OF INFORMATION, OR NONINFRINGEMENT.
Do not use or otherwise make available Product or related software or technology for any military purposes, including without
limitation, for the design, development, use, stockpiling or manufacturing of nuclear, chemical, or biological weapons or missile
technology products (mass destruction weapons). Product and related software and technology may be controlled under the
applicable export laws and regulations including, without limitation, the Japanese Foreign Exchange and Foreign Trade Law and the
U.S. Export Administration Regulations. Export and re-export of Product or related software or technology are strictly prohibited
except in compliance with all applicable export laws and regulations.
Please contact your TOSHIBA sales representative for details as to environmental matters such as the RoHS compatibility of Product.
Please use Product in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances,
including without limitation, the EU RoHS Directive. TOSHIBA ASSUMES NO LIABILITY FOR DAMAGES OR LOSSES
OCCURRING AS A RESULT OF NONCOMPLIANCE WITH APPLICABLE LAWS AND REGULATIONS.