SFH 206 K
Silizium-PIN-Fotodiode
Silicon PIN Photodiode
2001-02-22 1
Wesentliche Merkmale
Speziell geeignet für Anwendungen im Bereich
von 400 nm bis 1100 nm
Kurze Schaltzeit (typ. 20 ns)
5-mm-Plastikbauform im LED-Gehäuse
Auch gegurtet lieferbar
Anwendungen
Computer-Blitzlichtgeräte
Lichtschranken für Gleich- und
Wechsellichtbetrieb
Industrieelektronik
„Messen/Steuern/Regeln“
Typ
Type Bestellnummer
Ordering Code
SFH 206 K Q62702-P129
Features
Especially suitable for applications from
400 nm to 1100 nm
Short switching time (typ. 20 ns)
5 mm LED plastic package
Also available on tape and reel
Applications
Computer-controlled flashes
Photointerrupters
Industrial electronics
For control and drive circuits
2001-02-22 2
SFH 206 K
Grenzwerte
Maximum Ratings
Bezeichnung
Parameter Symbol
Symbol Wert
Value Einheit
Unit
Betriebs- und Lagertemperatur
Operating and storage temperature range Top; Tstg 40 + 100 °C
Löttemperatur (Lötstelle 2 mm vom Gehäuse
entfernt bei Lötzeit t 3 s)
Soldering temperature in 2 mm distanc e from case
bottom (t 3 s)
TS230 °C
Sperrspannung
Reverse voltage VR32 V
Verlustleistung, TA = 25 °C
Total power dissipation Ptot 150 mW
Kennwerte (TA = 25 °C, Normlicht A, T = 2856 K)
Characteristics (TA = 25 °C, standard light A, T = 2856 K)
Bezeichnung
Parameter Symbol
Symbol Wert
Value Einheit
Unit
Fotoempfindlichkeit, VR = 5 V
Spectral sensitivity S80 (50) nA/Ix
Wellenlänge der max. Fotoempfindlichkeit
Wavelength of max. sensitivity λS max 850 nm
Spektraler Bereich der Fotoempfindlichkeit
S = 10% von Smax
Spectral range of sensitivity
S = 10% of Smax
λ400 1100 nm
Bestrahlungsempfindl iche Fläche
Radiant sensitive area A7.00 mm2
Abmessung der bestrahlungsempfindlichen Fläche
Dimensions of radiant sensitive area L×B
L×W2.65 ×2.65 mm ×mm
Abstand Chipoberfläche zu Gehäuseoberfläche
Distance chip front to case surface H1.2 1.4 mm
Halbwinkel
Half angle ϕ±60 Grad
deg.
Dunkelstrom, VR = 10 V
Dark current IR2 ( 30) nA
Spektrale Fotoempfindlichke it, λ = 850 nm
Spectral sensitivity Sλ0.62 A/W
SFH 206 K
2001-02-22 3
Quantenausbeute, λ = 850 nm
Quantum yield η0.90 Electrons
Photon
Leerlaufspannung, Ev = 1000 Ix
Open-circuit voltage VO365 (310) mV
Kurzschlußstrom, Ev = 1000 Ix
Short-circuit current ISC 80 µA
Anstiegs- und Abfallzeit des Fotostromes
Rise and fall time of the photocurrent
RL = 50 Ω; VR = 5 V; λ = 850 nm; Ip = 800 µA
tr, tf20 ns
Durchlaßspannung, IF = 100 mA, E = 0
Forward voltage VF1.3 V
Kapazität, VR = 0 V, f = 1 MHz, E = 0
Capacitance C072 pF
Temperaturkoeffizient von VO
Temperature coefficient of VO
TCV 2.6 mV/K
Temperaturkoeffizient von ISC
Temperature coefficient of ISC
TCI0.18 %/K
Rauschäquivalente Strahlungsleistung
Noise equivalent power
VR = 10 V, λ = 850 nm
NEP 4.2 ×10 14
Nachweisgrenze, VR = 10 V, λ = 850 nm
Detection limit D* 6.3 ×1012
Kennwerte (TA = 25 °C, Normlicht A, T = 2856 K)
Characteristics (TA = 25 °C, standard light A, T = 2856 K) (contd)
Bezeichnung
Parameter Symbol
Symbol Wert
Value Einheit
Unit
W
Hz
------------
cm Hz×
W
--------------------------
SFH 206 K
2001-02-22 4
Relati ve Sp ectral Sensit i vi ty
Srel = f (λ)
Dark Current
IR = f (VR), E = 0
Directional Chara cter i sti cs
Srel = f (ϕ)
λ
OHF00078
0
rel
S
400
20
40
60
80
%
100
500 600 700 800 900 nm 1100
OHF01402
90
80
70
60
50
40 30 20 10
20 40 60 80 100 1200.40.60.81.0
ϕ
0.2
0.4
0.6
0.8
1.0
100 0
0
0
Photocurrent IP = f (Ev), VR = 5 V
Open-Ci r cu it V oltage VO = f (Ev)
Capacitance
C = f (VR), f = 1 MHz, E = 0
Total Pow er Di ssip ation
Ptot = f (TA)
Dark Current
IR = f (TA), VR = 10 V, E = 0
T
OHF00394
A
0
tot
P
020 40 60 80 ˚C 100
mW
20
40
60
80
100
120
140
160
T
OHF00082
A
-1
10 0
R
Ι
10
0
10
1
10
2
10
3
nA
20 40 60 80 ˚C 100
SFH 206 K
2001-02-22 5
Maßzeichnung
Package Outlines
Maße werden wi e fo lgt angegeben: mm (inch) / Dimensio ns are s pecified as follow s: m m (inc h).
Published by OSRAM Opto Semiconductors GmbH & Co. OHG
Wernerwerkstrasse 2, D-93049 Regensburg
© All Rights Reserved.
Attention please!
The inform at ion describe s the type of compon ent and shall not be considered as assur ed c haracteristics.
Terms of delivery and rights to change design reserved. Due to technical requirements components may contain
dangerous substances. For information on the types in question please contact our Sales Organization.
Packing
Please use the recyc ling operat ors known t o you. We can also help y ou get in touch wit h your near est sales offic e.
By agreement we will take packing material back, if it is sorted. You must bear the costs of transport. For packing
material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs
incurred.
Components used in life-support devices or systems must be expressly authorized for such purpose! Critical
components 1 , may only be used in life-support devices or systems 2 with the express written approval of OSRAM OS.
1 A critica l component is a co mponent usedin a l ife-support devi ce or system whose failure can re asonably be expec ted
to cause the failure of that life-support device or system, or to affect its safety or effectiveness of that device or system.
2 Life sup port device s or syst ems ar e int ended (a ) to b e imp lanted in t he hu man body , or ( b) to supp ort a nd/or main tain
and sust ain human life. If th ey fail , it is rea so nable to assume th at the health of the user may be endangered.
6.9 (0.272)
6.3 (0.248)
0.8 (0.031)
4.0 (0.157)
34 (1.339)
32 (1.260)
1.8 (0.071)
1.2 (0.047)
0.8 (0.031)
0.4 (0.016)
2.54 (0.100)
spacing
0.6 (0.024) x 0.5 (0.020)
0.4 (0.016) x 0.3 (0.012)
4.1 (0.161)
3.7 (0.146)
5.1 (0.201)
4.7 (0.185)
Cathode
Area not flat Radiant sensitive area
GEOY6647