PCA-116 Series – AC Operated Gage Heads
PCA-116 Series Gage Heads Rev. 4 www.meas-spec.com 2015-July
1/4
• Economy gage h ead
• AC operation
• 0.0001 inch [2.5 μm] repeatability
• Stroke ranges up to ±0.3 inch [7.6mm]
• Replaceable hardened tool steel contact tip
• Compatible with all our signal conditioners
DESCRIPTION
The PCA-116 Series gage heads were developed to serve less demanding applications, where the balance
between price and performance is paramount. Incorporating a standard LVDT (Linear Variable Differential
Transformer), low fr iction nylon sl eeve bearings and an ex ternally sprin g loaded shaft, the PC A-116 affor ds the
most cost effective gaging solution available. Other features include industry standard outer diameter for easy
installation, a nd a replac ea ble hard ene d tool steel contact tip using the 4-48 UNF-2A threads.
Like in most of our LVDTs, the PCA-116 windings are vacuum impregnated with a specially formulated, high
temper ature, flexib le resin, and the c oil ass embly is po tted insi de its hous ing with a two-com ponent ep oxy. This
provides ex cell ent pr otection against hos ti le en viro nments s uch as high humidity, vibration and shock.
Measurement Specialties, Inc. (NASDAQ MEAS) offers many other types of sensors and signal conditioners.
Data sheets can be downloaded from our web site at: http://www.meas-spec.com/datasheets.aspx
MEAS acquired Schaevitz Sensors and the SchaevitzTM trademark in 2000.
FEATURES APPLICATIONS
•
• Less demanding applications where cost
effective performance is paramount
•
Three ranges, ±0.1, ±0.2 and ±0.3 inch
•
•
•
Low friction Nylon sleeve bearings
•
Factory automation in mild environments
•
Replacement and other special tips available
•