A KYOCERA GROUP COMPANY
AVX
Tantalum and
Niobium Oxide Capacitors
1
Contents
SECTION 1: SURFACE MOUNT COMMERCIAL TANTALUM
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-4
General TAJ Series - Standard Tantalum. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-8
TAC Series - Standard TACmicrochip™. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-11
TLC Series - Tantalum Solid Electrolytic Chip Caps Consumer Series . . . . . . . . . . . . . . 12-13
Low Profile TAJ Series - Low Profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14-17
TAC Series - Low Profile TACmicrochip™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18-19
TAK Series - Low Profile Performance TACmicrochip™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Low ESR TPS Series - Low ESR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21-30
TPS Series III - New Generation Low ESR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31-34
TPM Series - Multianode, Tantalum Ultra Low ESR. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35-37
TPC Series - Low ESR TACmicrochip™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38-39
TCJ Series - Tantalum Solid Electrolytic Chip Caps w/Conductive Polymer Electrode . . 40-41
TLJ Series - Tantalum Solid Electrolytic Chip Caps Consumer Series . . . . . . . . . . . . . . . 41-43
Performance TRJ Series - Professional Tantalum . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44-46
THJ Series - High Temperature (up to 150°C) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47-49
High Reliability TMC Series - Established Reliability TACmicrochipTM . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50-51
TAZ Series - CWR09, CWR19, CWR29 and COTS-Plus . . . . . . . . . . . . . . . . . . . . . . . . . . 52-65
TBJ Series - CWR11 and COTS-Plus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66-72
TBC Series - CWR15 Fixed Chip Capacitors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
SECTION 2: NIOBIUM OXIDE - OxiCap™
Niobium Oxide Roadmap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
NOJ Series - Standard OxiCap™. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75-77
NOJ Series - Low Profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78-79
NOS Series - Low ESR OxiCap™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80-83
NOM Series - Low ESR Multianodes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84-85
SECTION 3: LEADED TANTALUM
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86
Dipped Radial Capacitors. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86
Dipped Radial - TAP Series Wire Form Outline . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87
TAP Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88-90
TAP Series Tape & Reel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91-92
Molded Axial Capacitors - TAR Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93-95
Hermetic Axial Capacitors - TAA Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96-98
Axial Capacitors - TAR & TAA Series Tape & Reel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99
SECTION 4: TECHNICAL SUMMARY AND APPLICATION GUIDELINES
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98-99
Section 1: Electrical Characteristics and Explanation of Terms . . . . . . . . . . . . . . . . . . 100-103
Section 2: A.C. Operation, Ripple Voltage and Ripple Current. . . . . . . . . . . . . . . . . . . 104-106
Section 3: Reliability and Calculation of Failure Rate . . . . . . . . . . . . . . . . . . . . . . . . . . 107-109
Section 4: Application Guidelines for Tantalum and OxiCapTM Capacitors . . . . . . . . . . 110-111
Section 5: Mechanical and Thermal Properties of Capacitors . . . . . . . . . . . . . . . . . . . . . . . 112
Product Safety and Environmental Information Data . . . . . . . . . . . . . . . . . . . . . . . . 113-115
TAJ, TPS, TRJ, THJ, TPM, TAC, TPC, TLJ, TCJ, TMC Series - Tape & Reel Packaging
. . 116-117
TAZ, CWR09, CWR11, CWR19 Series - Tape & Reel Packaging . . . . . . . . . . . . . . . . . . . . . 118
TAJ, TRJ, THJ, TPS, TPM, NOJ, NOS, NOM, TAC, TPC, TMC, TCJ, TLJ - Marking. . . . . . . 119
TAP TECHNICAL SUMMARY AND APPLICATION GUIDELINES
Section 1: Electrical Characteristics and Explanation of Terms . . . . . . . . . . . . . . . . . . 122-125
Section 2: A.C. Operation, Ripple Voltage and Ripple Current . . . . . . . . . . . . . . . . . . . . . . 126
Section 3: Reliability and Calculation of Failure Rate . . . . . . . . . . . . . . . . . . . . . . . . . . 127-129
Section 4: Application Guidelines for Tantalum Capacitors . . . . . . . . . . . . . . . . . . . . . . . . . 130
Questions and Answers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 131-133
2
Section 1: Introduction
AVX Tantalum
AVX’s focus is CUSTOMER satisfaction - customer satisfac-
tion in the broadest sense: product quality, technical support,
product availability - all at a competitive price.
In pursuance of the established goals of our corporate wide
QV2000 program, it is the stated objective of AVX Tantalum
to supply our customers with a world class service in the
manufacture and supply of electronic components, while
maintaining a positive return on investment.
This world class service shall be defined as consistently
supplying product and services of the highest quality and
reliability encompassing all aspects of the customer supply
chain.
In addition, any new or changed products, processes or
services will be qualified to established standards of quality
and reliability.
The objectives and guidelines listed above shall be achieved
by the following codes of practice:
1. Continual objective evaluation of customer needs and
expectations for the future and the leverage of all AVX
resources to meet this challenge.
2. Continually fostering and promoting a culture of continuous
improvement through ongoing training and empowered
participation of employees at all levels of the company.
3. Continuous Process Improvement using sound engineer-
ing principles to enhance existing equipment, material
and processes. This includes the application of the
science of S.P.C. focused on improving the Process
Capability Index, Cpk.
The Tantalum division has plants approved to ISO9001:2000
and TS16949:2002 (Automotive Quality System
Requirements) with the intention that all facilities world-wide
will adopt this as the quality standard.
Dedicated series of tantalum and niobium oxide capacitors
meets requirements of AEC-Q200.
The Tantalum division has plants approved to ISO14001 with
the intention that all facilities world-wide will adopt this as the
quality standard.
QUALITY STATEMENTS
APPLICATIONS
2-16 Volt
Low ESR
Low Profile Case
0603 available
Low Failure Rate
High Volumetric
Efficiency
Temperature Stability
Stable over Time
50 Volt @ 85°C
33 Volt @ 125°C
Automotive Range
High Reliability
Temperature Stability
QS9000 Approved
TS 16949 Plant Approved
Up to 150°C
AEC Q200 Approval
2 - 16 Volts
Low ESR
World’s Smallest
Tantalum
0402 Available
High Volumetric
Efficiency
Low Profile Versions
3
Introduction
AVX Tantalum
AVX Paignton UK is the Divisional Headquarters for the
Tantalum division which has manufacturing locations in
Paignton in the UK, Biddeford in Maine, USA, Juarez in
Mexico, Lanskroun in the Czech Republic, San Salvador, in
El Salvador and Tianjin in P.R. China.
This division manufactures tantalum and niobium oxide
capacitors. Tantalum is an element extracted from ores
found alongside tin and niobium deposits; the major sources
of supply are Canada, Brazil and Australasia.
Niobium oxide is a ceramic material that can be processed
to the same powder form as traditional tantalum capacitors
and manufactured in an identical process.
So for high volume tantalum and niobium oxide capacitors
with leading edge technology call us first - AVX your glob-
al partner.
Niobium oxide capacitors have been assigned the OxiCapTM
trademark.
TECHNOLOGY TRENDS
80
70
100
90
110
130
120
60
50
40
30
20
10
0
1975 1980 1985 1990 1995 2000 2005
Year
CV/g ('000s)
In line with our desire to become the number one supplier in
the world for passive and interconnection components, AVX
is constantly looking forward and innovating.
It is not good enough to market the best products; the
customer must have access to a service system which suits
their needs and benefits their business.
The AVX ‘one stop shopping’ concept is already beneficial
in meeting the needs of major OEMs while worldwide
partnerships with only the premier division of distributors aids
the smaller user.
Helping to market and support our customers across the
breadth and depth of our electronic component line card are
a dedicated team of sales engineers, applications engineers
and product marketing managers. Their qualifications are
hopefully always appropriate to your commercial needs, but
as higher levels of technical expertise are required, access
directly to the appropriate department is seamless and
transparent.
Total quality starts and finishes with our commitment to cus-
tomer service. Where cost and quality are perceived as given
quantities AVX’s first in class service invariably places us in
the top rank of any preferred supplier list.
Facilities are equipped with instant worldwide DP and
telecommunication links connected to every sales and
production site worldwide. That ensures our customers’
delivery requirements are consistently met wherever in the
world they may be.
WORKING WITH THE CUSTOMER
- ONE STOP SHOPPING
Tantalum Powder CV/gm
The amount of capacitance possible in a tantalum
capacitor is directly related to the type of tantalum powder
used to manufacture the anode.
The graph following shows how the (capacitance) x
(voltage) per gram (CV/g) has steadily increased over
time, thus allowing the production of larger and larger
capacitances with the same physical volume. CV/g is
the measure used to define the volumetric efficiency of a
powder, a high CV/g means a higher capacitance from
the same volume.
These powder improvements have been achieved
through close development with the material suppliers.
AVX Tantalum is committed to driving the available
technology forward as is clearly demonstrated by
extended ratings continually being developed, and
new technologies such as TACmicrochip™ and
OxiCap™ technology.
If you have any specific requirements, please contact
your local AVX sales office for details on how AVX
Tantalum can assist you in addressing your future
requirements.
*Niobium Oxide Capacitors are manufactured and sold under patent license from Cabot Corporation, Boyertown, Pennsylvania U.S.A.
4
Tantalum Series Guide
TLJ
Consumer
Pages 42-43
TRJ
Professional
Pages 44-46
THJ
High Reliability
High Temperature
Pages 47-49
TPM
Ultra Low ESR
Pages 35-37
TPS III
Ultra Low ESR
Pages 31-33
TPS
Low ESR
Pages 21-30
TCJ
Low ESR Polymer
Pages 40-41
Military
TAZ
CWR09
TBJ
CWR11
TMC
TACmicrochip™
CWR15 Fixed
CWR15
Pages 50-73
TAP
Leaded
Capacitors
Pages 87-92
TAJ
Generic Purpose and
High CV Capacitors
Pages 5-8
TAJ Low Profile
1.2, 1.5, 2.0 mm Height
Pages 14-16
TACmicrochip™
World Smallest Tantalum
in 0402, 0603, 0805
and 1206 Cases
Pages 9-11
TAC Low Profile
& Custom
Pages 18-19
TMC
Established
Reliability
Pages 50-51
TPC
Low ESR
Pages 38-39
TAK
High Cap
Low Profile
Page 20
5
CASE DIMENSIONS: millimeters (inches)
HOW TO ORDER
Code EIA L±0.20 (0.008) W+0.20 (0.008) H+0.20 (0.008) W1±0.20 (0.008) A+0.30 (0.012) S Min.
Code -0.10 (0.004) -0.10 (0.004) -0.20 (0.008)
A3216-18 3.20 (0.126) 1.60 (0.063) 1.60 (0.063) 1.20 (0.047) 0.80 (0.031) 1.10 (0.043)
B3528-21 3.50 (0.138) 2.80 (0.110) 1.90 (0.075) 2.20 (0.087) 0.80 (0.031) 1.40 (0.055)
C6032-28 6.00 (0.236) 3.20 (0.126) 2.60 (0.102) 2.20 (0.087) 1.30 (0.051) 2.90 (0.114)
D7343-31 7.30 (0.287) 4.30 (0.169) 2.90 (0.114) 2.40 (0.094) 1.30 (0.051) 4.40 (0.173)
E7343-43 7.30 (0.287) 4.30 (0.169) 4.10 (0.162) 2.40 (0.094) 1.30 (0.051) 4.40 (0.173)
V7361-38 7.30 (0.287) 6.10 (0.240) 3.45±0.30 3.10 (0.120) 1.40 (0.055) 4.40 (0.173)
(0.136±0.012)
W1dimension applies to the termination width for A dimensional area only.
The TAJ standard series encompasses
the five key sizes recognized by major
OEMs throughout the world. The V case
size has been added to the TAJ range
to allow high CVs to be offered. The
operational temperature is -55°C to
+85°C at rated voltage and up to +125°C
with voltage derating in applications
utilizing recommended series resistance.
Technical Data: All technical data relate to an ambient temperature of +25°C
Capacitance Range: 0.1µF to 1500µF
Capacitance Tolerance: ±10%; ±20%
Rated Voltage (VR)+85°C: 2.5 4 6.3 10 16 20 25 35 50
Category Voltage (VC)+125°C: 1.7 2.7 4 7 10 13 17 23 33
Surge Voltage (VS)+85°C: 3.3 5.2 8 13 20 26 32 46 65
Surge Voltage (VS)+125°C: 2.2 3.4 5 8 13 16 20 28 40
Temperature Range: -55°C to +125°C
Reliability: 1% per 1000 hours at 85°C, VRwith 0.1Ω/VRseries impedance,
60% confidence level
Qualification: CECC 30801 - 005 issue 2
EIA 535BAAC
Meets requirements of AEC-Q200
TAJ Series
Standard Tantalum
For part marking see page 121
TAJ
Type
C
Case Size
See table
above
106
Capacitance Code
pF code: 1st two
digits represent
significant figures
3rd digit represents
multiplier (number of
zeros to follow)
M
Tolerance
K=±10%
M=±20%
035
Rated DC Voltage
002=2.5Vdc
004=4Vdc
006=6.3Vdc
010=10Vdc
016=16Vdc
020=20Vdc
025=25Vdc
035=35Vdc
050=50Vdc
R
Packaging
R = 7" T/R
(Lead Free since
production date 1/1/04)
S = 13" T/R
(Lead Free since
production date 1/1/04)
A = Gold Plating
7" Reel
B = Gold Plating
13" Reel
**
Additional
characters may be
added for special
requirements
TECHNICAL SPECIFICATIONS
6
TAJ Series
Standard Tantalum
CAPACITANCE AND RATED VOLTAGE, VR(VOLTAGE CODE) RANGE
(LETTER DENOTES CASE SIZE)
Capacitance Rated voltage DC (VR) to 85°C
µF Code 2.5V (e) 4V (G) 6.3V (J) 10V (A) 16V (C) 20V (D) 25V (E) 35V (V) 50V (T)
0.10 104 AA
0.15 154 AA/B
0.22 224 AA/B
0.33 334 AB
0.47 474 AA/B B/C
0.68 684 AAA/B B/C
1.0 105 AAAA/B B/C
1.5 155 AAAA/B A/B/C C/D
2.2 225 AAA/BA/B A/B A/B/C C/D
3.3 335 AAA/B A/B A/B/CB/C C/D
4.7 475 AAA/BA/B A/B/CB/CB/C/D D
6.8 685 AA/B A/BA/B/CA/B/C B/C C/D D
10 106 AA/B A/B/C A/B/C B/C C/D C/D/E D/E
15 156 A/B A/BA/B/CA
(M)
/B/C B/C/DC/D C/D E
22 226 AA/B/C A/B/CB/C/D B/C/D C/D D/E V
33 336 A/BA/B/C B/C/DB/C/D C/D D/E D/E/V
47 476 A A/BA/B/C/DB/C/DC/D C/D/E D/E E/V
68 686 A B/CB/C/DB/C/DC/D D/E E/V V
(M)
100 107 B B/CB/C/DB
(M)
/C/D/ED/E D/E/V V
150 157 B B/C C/D C/D/E D/E/V E/V
220 227 B/D B
(M)
/C/D C/D/E D/E D/E/V
330 337 D C/D/EC/D/E D/E/V E/V
470 477 C/D D/E D/E/V E/V
680 687 D/E D/E E/V V
1000 108 D
(M)
/E E/V V
(M)
1500 158 E/V E/V
(M)
Non preferred Ratings - not recommended for new designs,
higher voltage or smaller case size substitution are offered.
Developmental Ratings - subject to change.
Released codes
(M tolerance only)
Note: Voltage ratings are minimum values. AVX reserves the right to supply
higher ratings in the same case size, to the same reliability standards.
7
Rated DCL DF ESR
AVX Case Capacitance Voltage (µA) % Max. (Ω)
Part No. Size (µF) (V) Max. Max. @100kHz
TAJA476*002# A 47 2.5 0.9 6 3
TAJA686*002# A 68 2.5 1.4 8 1.5
TAJB107*002# B 100 2.5 2.5 8 1.4
TAJB157*002# B 150 2.5 3 10 1.6
TAJB227*002# B 220 2.5 4.4 16 1.6
TAJD227*002# D 220 2.5 5.5 8 0.3
TAJD337*002# D 330 2.5 8.2 8 0.3
TAJC477*002# C 470 2.5 9.4 12 0.2
TAJD477*002# D 470 2.5 11.6 8 0.2
TAJD687*002# D 680 2.5 17 16 0.2
TAJE687*002# E 680 2.5 17 10 0.2
TAJD108M002# D 1000 2.5 25 20 0.2
TAJE108*002# E 1000 2.5 20 14 0.4
TAJE158*002# E 1500 2.5 37 20 0.2
TAJV158*002# V 1500 2.5 30 20 0.2
TAJA336*004# A 33 4 1.3 6 3
TAJA476*004# A 47 4 1.9 8 2.6
TAJB686*004# B 68 4 2.7 6 1.8
TAJB107*004# B 100 4 4 8 0.9
TAJB157*004# B 150 4 6 8 1.5
TAJC157*004# C 150 4 6 6 0.3
TAJB227M004# B 220 4 8.8 12 1.1
TAJC227*004# C 220 4 8.8 8 1.2
TAJD227*004# D 220 4 8.8 8 0.9
TAJC337*004# C 330 4 13.2 8 0.9
TAJD337*004# D 330 4 13.2 8 0.9
TAJD477*004# D 470 4 18.8 12 0.9
TAJE477*004# E 470 4 18.8 10 0.5
TAJD687*004# D 680 4 27.2 14 0.5
TAJE687*004# E 680 4 27.2 14 0.9
TAJE108*004# E 1000 4 40 14 0.4
TAJV108*004# V 1000 4 40 16 0.4
TAJE158*004# E 1500 4 60 30 0.2
TAJV158M004# V 1500 4 60 30 0.2
TAJA106*006# A 10 6.3 0.6 6 4
TAJA156*006# A 15 6.3 0.9 6 3.5
TAJA226*006# A 22 6.3 1.4 6 3
TAJA336*006# A 33 6.3 2.1 8 2.5
TAJA476*006# A 47 6.3 2.8 10 1.6
TAJB476*006# B 47 6.3 3 6 2
TAJC476*006# C 47 6.3 3 6 1.6
TAJB686*006# B 68 6.3 4 8 0.9
TAJC686*006# C 68 6.3 4.3 6 1.5
TAJB107*006# B 100 6.3 6.3 10 1.7
TAJC107*006# C 100 6.3 6.3 6 0.9
TAJC157*006# C 150 6.3 9.5 6 1.3
TAJD157*006# D 150 6.3 9.5 6 0.9
TAJC227*006# C 220 6.3 13.9 8 1.2
TAJD227*006# D 220 6.3 13.9 8 0.9
TAJE227*006# E 220 6.3 13.9 8 0.9
TAJD337*006# D 330 6.3 20.8 8 0.4
TAJE337*006# E 330 6.3 20.8 8 0.4
TAJD477*006# D 470 6.3 28 12 0.4
TAJE477*006# E 470 6.3 28 10 0.4
TAJV477*006# V 470 6.3 28 10 0.4
TAJ Series
Standard Tantalum
RATINGS & PART NUMBER REFERENCE
Rated DCL DF ESR
AVX Case Capacitance Voltage (µA) % Max. (Ω)
Part No. Size (µF) (V) Max. Max. @100kHz
TAJE687*006# E 680 6.3 42.8 10 0.5
TAJV687*006# V 680 6.3 42.8 10 0.5
TAJV108M006# V 1000 6.3 63 16 0.4
TAJA475*010# A 4.7 10 0.5 6 5
TAJA685*010# A 6.8 10 0.7 6 4
TAJA106*010# A 10 10 1 6 3
TAJA156*010# A 15 10 1.5 6 3.2
TAJB156*010# B 15 10 1.5 6 2.8
TAJA226*010# A 22 10 2.2 8 3
TAJB226*010# B 22 10 2.2 6 2.4
TAJB336*010# B 33 10 3.3 6 1.8
TAJC336*010# C 33 10 3.3 6 1.6
TAJB476*010# B 47 10 4.7 8 1
TAJC476*010# C 47 10 4.7 6 1.2
TAJB686*010# B 68 10 6.8 6 1.4
TAJC686*010# C 68 10 6.8 6 1.3
TAJB107M010# B 100 10 10 8 1.4
TAJC107*010# C 100 10 10 8 1.2
TAJD107*010# D 100 10 10 6 0.9
TAJC157*010# C 150 10 15 8 0.9
TAJD157*010# D 150 10 15 6 0.9
TAJE157*010# E 150 10 15 8 0.9
TAJD227*010# D 220 10 22 8 0.5
TAJE227*010# E 220 10 22 8 0.5
TAJD337*010# D 330 10 33 8 0.9
TAJE337*010# E 330 10 33 8 0.9
TAJV337*010# V 330 10 33 10 0.9
TAJE477*010# E 470 10 47 10 0.5
TAJV477*010# V 470 10 47 10 0.5
TAJA225*016# A 2.2 16 0.5 6 6.5
TAJA335*016# A 3.3 16 0.5 6 5
TAJB335*016# B 3.3 16 0.5 6 4.5
TAJA475*016# A 4.7 16 0.8 6 4
TAJB475*016# B 4.7 16 0.8 6 3.5
TAJA685*016# A 6.8 16 1.1 6 3.5
TAJB685*016# B 6.8 16 1.1 6 2.5
TAJA106*016# A 10 16 1.6 8 3
TAJB106*016# B 10 16 1.6 6 2.8
TAJC106*016# C 10 16 1.6 6 2
TAJA156M016# A 15 16 2.4 6 2
TAJB156*016# B 15 16 2.4 6 2.5
TAJC156*016# C 15 16 2.4 6 1.8
TAJB226*016# B 22 16 3.5 6 2.3
TAJC226*016# C 22 16 3.5 6 1.6
TAJD226*016# D 22 16 3.5 6 1.1
TAJB336*016# B 33 16 5.3 8 2.1
TAJC336*016# C 33 16 5.3 6 1.5
TAJD336*016# D 33 16 5.3 6 0.9
TAJC476*016# C 47 16 7.5 6 1.4
TAJD476*016# D 47 16 7.5 6 0.9
TAJC686*016# C 68 16 10.9 6 1.3
TAJD686*016# D 68 16 10.9 6 0.9
TAJD107*016# D 100 16 16 6 0.9
TAJE107*016# E 100 16 16 6 0.9
TAJD157*016# D 150 16 24 6 0.9
All technical data relates to an ambient temperature of +25°C. Capacitance and
DF are measured at 120Hz, 0.5V RMS with a maximum DC bias of 2.2 volts.
DCL is measured at rated voltage after 5 minutes.
*Insert K for ±10% and M for ±20%
Capacitance Tolerance
# Standard Plating – Insert R for 7" reel and S for 13" reel
# Gold Plating – Insert A for 7" reel and B for 13" reel
NOTE: AVX reserves the right to supply a higher voltage rating or tighter
tolerance part in the same case size, to the same reliability standards.
8
TAJ Series
Standard Tantalum
RATINGS & PART NUMBER REFERENCE
Rated DCL DF ESR
AVX Case Capacitance Voltage (µA) % Max. (Ω)
Part No. Size (µF) (V) Max. Max. @100kHz
TAJE157*016# E 150 16 24 8 0.3
TAJV157*016# V 150 16 24 8 0.5
TAJE227*016# E 220 16 35.2 10 0.5
TAJV227*016# V 220 16 35.2 8 0.9
TAJA105*020# A 1 20 0.5 4 9
TAJA155*020# A 1.5 20 0.5 6 6.5
TAJA225*020# A 2.2 20 0.5 6 5.3
TAJB225*020# B 2.2 20 0.5 6 3.5
TAJA335*020# A 3.3 20 0.7 6 4.5
TAJB335*020# B 3.3 20 0.7 6 3
TAJA475*020# A 4.7 20 0.9 6 4
TAJB475*020# B 4.7 20 0.9 6 3
TAJA685*020# A 6.8 20 1.4 6 2.5
TAJB685*020# B 6.8 20 1.4 6 2.5
TAJC685*020# C 6.8 20 1.4 6 2
TAJB106*020# B 10 20 2 6 2.1
TAJC106*020# C 10 20 2 6 1.9
TAJB156*020# B 15 20 3 6 2
TAJC156*020# C 15 20 3 6 1.7
TAJB226*020# B 22 20 4.4 6 1.8
TAJC226*020# C 22 20 4.4 6 1.6
TAJD226*020# D 22 20 4.4 6 0.9
TAJC336*020# C 33 20 6.6 6 1.5
TAJD336*020# D 33 20 6.6 6 0.9
TAJC476*020# C 47 20 9.4 6 0.9
TAJD476*020# D 47 20 9.4 6 0.9
TAJE476*020# E 47 20 9.4 6 0.9
TAJD686*020# D 68 20 13.6 6 0.9
TAJE686*020# E 68 20 13.6 6 0.9
TAJD107*020# D 100 20 20 6 0.9
TAJE107*020# E 100 20 20 6 0.9
TAJV107*020# V 100 20 20 8 0.9
TAJE157*020# E 150 20 30 8 0.3
TAJV157*020# V 150 20 30 8 0.5
TAJA474*025# A 0.47 25 0.5 4 14
TAJA684*025# A 0.68 25 0.5 4 10
TAJA105*025# A 1 25 0.5 4 8
TAJA155*025# A 1.5 25 0.5 6 7.5
TAJB155*025# B 1.5 25 0.5 6 5
TAJA225*025# A 2.2 25 0.6 6 7
TAJB225*025# B 2.2 25 0.6 6 4.5
TAJA335*025# A 3.3 25 0.8 6 3.7
TAJB335*025# B 3.3 25 0.8 6 3.5
TAJB475*025# B 4.7 25 1.2 6 2.8
TAJB685*025# B 6.8 25 1.7 6 2.8
TAJC685*025# C 6.8 25 1.7 6 2
TAJC106*025# C 10 25 2.5 6 1.8
TAJD106*025# D 10 25 2.5 6 1.2
TAJC156*025# C 15 25 3.8 6 1.6
TAJD156*025# D 15 25 3.8 6 1
TAJC226*025# C 22 25 5.5 6 1.4
TAJD226*025# D 22 25 5.5 6 0.9
TAJD336*025# D 33 25 8.3 6 0.9
TAJE336*025# E 33 25 8.3 6 0.9
TAJD476*025# D 47 25 11.8 6 0.9
TAJE476*025# E 47 25 11.8 6 0.9
TAJE686*025# E 68 25 17 6 0.9
TAJV686*025# V 68 25 17 6 0.9
TAJV107*025# V 100 25 25 8 0.4
TAJA104*035# A 0.1 35 0.5 4 24
Rated DCL DF ESR
AVX Case Capacitance Voltage (µA) % Max. (Ω)
Part No. Size (µF) (V) Max. Max. @100kHz
TAJA154*035# A 0.15 35 0.5 4 21
TAJA224*035# A 0.22 35 0.5 4 18
TAJA334*035# A 0.33 35 0.5 4 15
TAJA474*035# A 0.47 35 0.5 4 12
TAJB474*035# B 0.47 35 0.5 4 10
TAJA684*035# A 0.68 35 0.5 4 8
TAJB684*035# B 0.68 35 0.5 4 8
TAJA105*035# A 1 35 0.5 4 7.5
TAJB105*035# B 1 35 0.5 4 6.5
TAJA155*035# A 1.5 35 0.5 6 7.5
TAJB155*035# B 1.5 35 0.5 6 5.2
TAJC155*035# C 1.5 35 0.5 6 4.5
TAJA225*035# A 2.2 35 0.8 6 4.5
TAJB225*035# B 2.2 35 0.8 6 4.2
TAJC225*035# C 2.2 35 0.8 6 3.5
TAJB335*035# B 3.3 35 1.2 6 3.5
TAJC335*035# C 3.3 35 1.2 6 2.5
TAJB475*035# B 4.7 35 1.2 6 3.1
TAJC475*035# C 4.7 35 1.6 6 2.2
TAJD475*035# D 4.7 35 1.6 6 1.5
TAJC685*035# C 6.8 35 2.4 6 1.8
TAJD685*035# D 6.8 35 2.4 6 1.3
TAJC106*035# C 10 35 3.5 6 1.6
TAJD106*035# D 10 35 3.5 6 1
TAJE106*035# E 10 35 3.5 6 0.9
TAJC156*035# C 15 35 5.3 6 1.4
TAJD156*035# D 15 35 5.3 6 0.9
TAJD226*035# D 22 35 7.7 6 0.9
TAJE226*035# E 22 35 7.7 6 0.9
TAJD336*035# D 33 35 11.6 6 0.9
TAJE336*035# E 33 35 11.6 6 0.9
TAJV336*035# V 33 35 11.6 6 500
TAJE476*035# E 47 35 16.5 6 0.9
TAJV476*035# V 47 35 16.5 6 0.4
TAJV686M035# V 68 35 23.8 6 0.5
TAJA104*050# A 0.1 50 0.5 4 22
TAJA154*050# A 0.15 50 0.5 4 15
TAJB154*050# B 0.15 50 0.5 4 17
TAJA224*050# A 0.22 50 0.5 4 18
TAJB224*050# B 0.22 50 0.5 4 14
TAJB334*050# B 0.33 50 0.5 4 12
TAJB474*050# B 0.47 50 0.7 4 9.5
TAJC474*050# C 0.47 50 0.5 4 8
TAJB684*050# B 0.68 50 0.5 4 8
TAJC684*050# C 0.68 50 0.5 4 7
TAJB105*050# B 1 50 0.5 4 7
TAJC105*050# C 1 50 0.5 4 5.5
TAJC155*050# C 1.5 50 0.8 6 4.5
TAJD155*050# D 1.5 50 0.8 6 4
TAJC225*050# C 2.2 50 1.1 6 3
TAJD225*050# D 2.2 50 1.1 6 2.5
TAJC335*050# C 3.3 50 1.7 6 2.5
TAJD335*050# D 3.3 50 1.7 6 2
TAJD475*050# D 4.7 50 2.4 6 1.4
TAJD685*050# D 6.8 50 3.4 6 1
TAJD106*050# D 10 50 5 6 0.8
TAJE106*050# E 10 50 5 6 1
TAJE156*050# E 15 50 7.5 6 0.6
TAJV226*050# V 22 50 11 8 0.6
All technical data relates to an ambient temperature of +25°C. Capacitance and DF are measured at 120Hz, 0.5V RMS with a maximum DC bias of 2.2 volts.
DCL is measured at rated voltage after 5 minutes.
*Insert K for ±10% and M for ±20% # Standard Plating – Insert R for 7" reel and S for 13" reel
Capacitance Tolerance # Gold Plating – Insert A for 7" reel and B for 13" reel
NOTE: AVX reserves the right to supply a higher voltage rating
or tighter tolerance part in the same case size, to the
same reliability standards.
9
%
%
TACmicrochip™
Standard Microchip
The world’s smallest surface mount
Tantalum capacitor, small enough to create
space providing room for ideas to grow.
TACmicrochip™ is a major breakthrough
in miniaturization without reduction in
performance.
It offers you the highest energy store in a
small case size down to 0402; enhanced
high frequency operation through unique
ESR performance with temperature and
voltage stability is also offered.
CASE DIMENSIONS: millimeters (inches)
Minimum
Code EIA EIA Length (L) Width (W) Height (H) Te rmination Termination Average
Code Metric Spacing(S) Length (Lt) Mass
K0402 1005-07
1.00 0.50 0.50
0.40 min. 0.10 2.0mg
(0.039 ) (0.020 ) (0.020 ) (0.004)
L0603 1608-10 1.60 0.85 0.85
0.65 min. 0.15 8.6mg
(0.063 ) (0.033 ) (0.033 ) (0.006)
R0805 2012-15 2.00 1.35 1.35
0.85 min. 0.15 29.9mg
(0.079 ) (0.053 ) (0.053 ) (0.006)
A1206 3216-18 3.20 ±0.20 1.60 ±0.20 1.60 ±0.20 2.00 min. 0.15 44.6mg
(0.126 ±0.008) (0.063 ±0.008) (0.063 ±0.008) (0.006)
L
SLt W
H
POLARITY BAND NOT TO
EXCEED CENTER LINE
+0.20
-0.00
+0.008
-0.000
+0.20
-0.00
+0.008
-0.000
+0.20
-0.00
+0.008
-0.000
+0.20
-0.00
+0.008
-0.000
+0.20
-0.00
+0.008
-0.000
+0.15
-0.00
+0.006
-0.000
+0.15
-0.00
+0.006
-0.000
+0.15
-0.00
+0.006
-0.000
+0.15
-0.00
+0.006
-0.000
TAC
Type
TACmicrochip™
L
Case Size
0402=K
0603=L
0805=R
1206=A
226
Capacitance Code
pF code: 1st two digits
represent significant figures,
3rd digit represents multiplier
(number of zeros to follow)
M
Tolerance
K=±10%
M=±20%
TA
Alternative
characters may
be used for
special
requirements
HOW TO ORDER
R
Packaging
(see table below)
Standard Standard
Reel Tin Termination Tin Termination Gold Termination
Size Plastic Tape Paper Tape Plastic Tape
Case A/R/L K A/R/L
7" RTA PTA ATA
41⁄4"XTA QTA FTA
Packaging Suffix
Technical Data: All technical data relate to an ambient temperature of +25°C
Capacitance Range: 0.47µF to 150µF
Capacitance Tolerance: ±10%; ±20%
Leakage Current DCL: 0.01CV or 0.5µA whichever is the greater
Rated Voltage (VR)+85°C: 2 3 4 6.3 10 16 20 25 35
Category Voltage (VC)+125°C: 1.3 2 2.7 4 7 10 13 17 23
Surge Voltage (VS)+85°C: 2.7 3.9 5.2 8 13 20 26 32 46
Surge Voltage (VS)+125°C: 1.7 2.6 3.2 5 8 12 16 20 28
Temperature Range: -55°C to +125°C
Reliability: 1% per 1000 hours at 85°C, VRwith 0.1Ω/V series impedance,
60% confidence level
Termination Finish: Nickel and Tin Plating (standard),
Nickel and Gold Plating option available upon request
TECHNICAL SPECIFICATIONS
004
Rated DC Voltage
002=2Vdc
003=3Vdc
004=4Vdc
006=6.3Vdc
010=10Vdc
016=16Vdc
020=20Vdc
025=25Vdc
035=35Vdc
ENVIRONMENTAL FRIENDLY
COMPONENT
10
Capacitance Voltage Rating DC (VR) at 85°C
Cap. (µF) Code 2.0V 3.0V 4.0V 6.3V 10V 16V 20V 25V 35V
0.33 334
0.47 474 K/L L
0.68 684 K/L L
1.0 105 K/L K/L L R R
1.5 155 L L L
2.2 225 K/L L K/L L L
3.3 335 K/L K/L L L L/R
4.7 475 K/L K/L K/L L L/R R
6.8 685 L L L L/R R
10 106 K/L K/L L/R L/R L/R R
15 156 R L/R L/R R
22 226 R L/R L/R R R
33 336 R R R R A
47 476 R L/R RR/A
68 686 R R A
100 107 R/A A A
150 157 A
220 227
STANDARD COMMERCIAL RANGE (EIA Sizes) (LETTER DENOTES CASE SIZE)
TACmicrochip™
Standard Microchip
Developmental Ratings - subject to change
Standard Height Profile: K, L, R, A Case
Low Profile: N, U, H, T Case
Custom Low Profile: X Case
11
TACmicrochip™
Standard Microchip
Rated DCL DF ESR
AVX EIA Case Capacitance Voltage (µA) % Max. (Ω)
Part No. Size (µF) (V) Max. Max. @100kHz
TACK335M002# 0402 K 3.3 2.0 0.5 8 15
TACL335*002# 0603 L 3.3 2.0 0.5 6 7.5
TACK475M002# 0402 K 4.7 2.0 0.5 12 15
TACL475*002# 0603 L 4.7 2.0 0.5 6 7.5
TACL685*002# 0603 L 6.8 2.0 0.5 6 7.5
TACK106M002# 0402 K 10 2.0 0.5 15 15
TACL106*002# 0603 L 10 2.0 0.5 10 7.5
TACR226*002# 0805 R 22 2.0 0.7 8 5
TACR336*002# 0805 R 33 2.0 1.0 10 5
TACR476*002# 0805 R 47 2.0 1.5 10 5
TACR686M002# 0805 R 68 2.0 1.4 14 5
TACA157M002# 1206 A 150 2.0 3.0 20 1
TACK225M003# 0402 K 2.2 3.0 0.5 6 15
TACL225*003# 0603 L 2.2 3.0 0.5 6 7.5
TACK335M003# 0402 K 3.3 2.0 0.5 8 15
TACL335*003# 0603 L 3.3 3.0 0.5 6 7.5
TACK475M003# 0402 K 4.7 3.0 0.5 12 15
TACL475*003# 0603 L 4.7 3.0 0.5 6 7.5
TACL685*003# 0603 L 6.8 3.0 0.5 6 7.5
TACK106M003# 0402 K 10 3.0 0.5 15 15
TACL106*003# 0603 L 10 3.0 0.5 10 7.5
TACR156*003# 0805 R 15 3.0 0.5 8 5
TACL226M003# 0603 L 22 3.0 0.7 20 7.5
TACR226*003# 0805 R 22 3.0 0.7 8 5
TACR336*003# 0805 R 33 3.0 1.0 10 5
TACR476*003# 0805 R 47 3.0 1.5 10 5
TACR686M003# 0805 R 68 3.0 2.0 14 5
TACA107M003# 1206 A 100 3.0 3.0 15 1
TACL155*004# 0603 L 1.5 4.0 0.5 6 7.5
TACL225*004# 0603 L 2.2 4.0 0.5 6 7.5
TACL335*004# 0603 L 3.3 4.0 0.5 6 7.5
TACK475M004# 0402 K 4.7 4.0 0.5 15 15
TACL475*004# 0603 L 4.7 4.0 0.5 6 7.5
TACL685*004# 0603 L 6.8 4.0 0.5 8 7.5
TACL106M004# 0603 L 10 4.0 0.5 10 7.5
TACR106*004# 0805 R 10 4.0 0.5 8 5
TACL156M004# 0603 L 15 4.0 0.6 20 7.5
TACR156*004# 0805 R 15 4.0 0.6 8 5
TACL226M004# 0603 L 22 4.0 0.9 20 7.5
TACR226*004# 0805 R 22 4.0 0.9 8 5
TACR336*004# 0805 R 33 4.0 1.3 10 5
TACR476M004# 0805 R 47 4.0 1.9 14 5
TACA686M004# 1206 A 68 4.0 2.7 15 1
TACA107M004# 1206 A 100 4.0 4.0 20 1
RATINGS & PART NUMBER REFERENCE
Rated DCL DF ESR
AVX EIA Case Capacitance Voltage (µA) % Max. (Ω)
Part No. Size (µF) (V) Max. Max. @100kHz
TACK105M006# 0402 K 1.0 6.3 0.5 6 15
TACL105*006# 0603 L 1.0 6.3 0.5 6 7.5
TACL155*006# 0603 L 1.5 6.3 0.5 6 7.5
TACK225M006# 0402 K 2.2 6.3 0.5 8 15
TACL225*006# 0603 L 2.2 6.3 0.5 6 7.5
TACL335*006# 0603 L 3.3 6.3 0.5 6 7.5
TACL475*006# 0603 L 4.7 6.3 0.5 8 7.5
TACL685*006# 0603 L 6.8 6.3 0.5 10 7.5
TACR685*006# 0805 R 6.8 6.3 0.5 8 5
TACL106M006# 0603 L 10 6.3 0.6 10 6
TACR106*006# 0805 R 10 6.3 0.6 8 5
TACL156M006# 0603 L 15 6.0 0.9 20 7.5
TACR156*006# 0805 R 15 6.3 0.9 8 5
TACR226*006# 0805 R 22 6.3 1.4 10 5
TACR336*006# 0805 R 33 6.3 2.1 12 5
TACA476M006# 1206 A 47 6.3 3.0 15 1
TACA107M006# 1206 A 100 6.3 6.3 20 1
TACK474M010# 0402 K 0.47 10.0 0.5 6 15
TACL474*010# 0603 L 0.47 10.0 0.5 6 7.5
TACK684M010# 0402 K 0.68 10.0 0.5 8 15
TACL684*010# 0603 L 0.68 10.0 0.5 6 7.5
TACK105M010# 0402 K 1.0 10.0 0.5 6 15
TACL105*010# 0603 L 1.0 10.0 0.5 6 7.5
TACL155*010# 0603 L 1.5 10.0 0.5 6 7.5
TACL225*010# 0603 L 2.2 10.0 0.5 6 7.5
TACL335*010# 0603 L 3.3 10.0 0.5 8 7.5
TACR335*010# 0805 R 3.3 10.0 0.5 8 5
TACL475M010# 0603 L 4.7 10.0 0.5 10 6
TACR475*010# 0805 R 4.7 10.0 0.5 8 6
TACR685*010# 0805 R 6.8 10.0 0.7 8 5
TACL106M010# 0603 L 10 10.0 1.0 20 7.5
TACR106*010# 0805 R 10 10.0 1.0 8 5
TACR156*010# 0805 R 15 10.0 1.5 10 5
TACR226M010# 0805 R 22 10.0 2.2 14 5
TACA226M010# 1206 A 22 10.0 2.2 10 1
TACA336M010# 1206 A 33 10.0 3.3 12 1
TACL474*016# 0603 L 0.47 16.0 0.5 6 7.5
TACL684*016# 0603 L 0.68 16.0 0.5 6 7.5
TACL105*016# 0603 L 1.0 16.0 0.5 6 7.5
TACL225M016# 0603 L 2.2 16.0 0.5 10 7.5
TACR106*016# 0805 R 10 16.0 1.6 10 5
TACR475M020# 0805 R 4.7 20.0 0.9 8 5
TACR105*025# 0805 R 1.0 25.0 0.5 8 5
All technical data relates to an ambient temperature of +25°C. Capacitance and
DF are measured at 120Hz, 0.5V RMS with a maximum DC bias of 2.2 volts.
DCL is measured at rated voltage after 5 minutes.
*Insert K for ±10% and M for ±20% Capacitance Tolerance
#Refer to packaging suffix for options
NOTE: AVX reserves the right to supply a higher voltage rating or tighter
tolerance part in the same case size, to the same reliability standards.
12
ENVIRONMENTAL FRIENDLY
COMPONENT
TLC
Type
L
Case Size
See table
above
226
Capacitance Code
pF code: 1st two digits
represent significant figures,
3rd digit represents multiplier
(number of zeros to follow)
M
Tolerance
M=±20%
006
Rated DC Voltage
003=3Vdc
004=4Vdc
006=6.3Vdc
010=10Vdc
HOW TO ORDER
R
Packaging
See table
above
Case Size Standard Tin Termination Gold Termination Tape Type/Width
41⁄4inch Reel 7 inch Reel 41⁄4inch Reel 7 inch Reel
KQTA / 1,000 PTA / 10,000 — — Paper / 8mm
LXTA / 500 RTA / 3,500 FTA / 500 ATA / 3,500 Plastic / 8mm
RXTA / 500 RTA / 2,500 FTA / 500 ATA / 2,500 Plastic / 8mm
TXTA / 500 RTA / 2,500 — — Plastic / 8mm
Packaging Suffix/Quantity
Technical Data: All technical data relate to an ambient temperature of +25°C
Capacitance Range: 4.7µF to 68µF
Capacitance Tolerance: ±20%
Rated Voltage (VR)-55°C ≤+40°C: 3 4 6.3 10
Category Voltage (VC)at 85°C: 1.5 2 3.2 5
Category Voltage (VC)at 125°C: 0.6 0.8 1.3 2
Temperature Range: -55°C to +125°C with category voltage
Reliability: 0.2% per 1000 hours at 85°C, 0.5xVR, with 0.1Ω/V series impedance with
60% confidence level
TECHNICAL SPECIFICATIONS
TLC Series
Tantalum Solid Electrolytic Chip Capacitors
Consumer Series
The consumer TLC series of tantalum capacitors
offers high capacitance vs. voltage ratio based on
stable MnO2electrode capacitors. The TLC series
complies with RoHS requirements and it is an envi-
ronmentally friendly component ready for lead-free
assembly systems. The TLC series is suitable for
wide range of consumer electronic applications
such as the latest portable handheld electronics,
cellular phones, PDAs or other digital equipment
and cameras.
• Super High Volumetric Efficiency
• Environmentally Friendly Component
• Small & Low Profile Case Sizes
• Leadfree Assembly Systems
• Consumer Applications
LEAD-FREE COMPATIBLE
COMPONENT
%
%
CASE DIMENSIONS: millimeters (inches)
Minimum
Code EIA EIA Length (L) Width (W) Height (H) Te rmination Te rmination Average
Code Metric Spacing(S) Length (Lt) Mass
K0402 1005-07
1.00 0.50 0.50 0.40 min. 0.10 2.0mg
(0.039 ) (0.020 ) (0.020 ) (0.016 min) (0.004)
L0603 1608-10 1.60 0.85 0.85 0.65 min. 0.15 8.6mg
(0.063 ) (0.033 ) (0.033 ) (0.025 min) (0.006)
R0805 2012-15 2.50 1.35 1.35 0.85 min. 0.15 29.9mg
(0.098 ) (0.053 ) (0.053 ) (0.033 min) (0.006)
T3528 3528-12
3.50 2.80 1.20 max 2.30 min. 0.15 65mg
(0.047 max) (0.006)
(0.138 )(0.117 )(0.091 min)
L
SLt W
H
POLARITY BAND NOT TO
EXCEED CENTER LINE
+0.20
-0.00
+0.008
-0.000
+0.20
-0.00
+0.008
-0.000
+0.20
-0.00
+0.008
-0.000
+0.20
-0.00
+0.008
-0.000
+0.20
-0.00
+0.008
-0.000
+0.20
-0.00
+0.008
-0.000
+0.15
-0.00
+0.006
-0.000
+0.15
-0.00
+0.006
-0.000
+0.15
-0.00
+0.006
-0.000
+0.15
-0.00
+0.006
-0.000
+0.15
-0.00
+0.006
-0.000
13
TLC Series
Tantalum Solid Electrolytic Chip Capacitors
Consumer Series
Capacitance Voltage Rating DC (V
R
) at 85°C
Cap. (µF) Code 3.0V 4.0V 6.3V 10V
4.7 475 K K
6.8 685
10 106 K K
15 156
22 226 L
33 336 L
47 476 LR
68 686 R
100 107 R T
COMMERCIAL RANGE (LETTER DENOTES CASE SIZE)
Developmental Ratings - subject to change
Case Rated DCL ESR max
AVX EIA Size
Capacitance Voltage (µA) @100kHz
Part No. (µF) (V) Max. (Ω)
TLCK106M003# 0402 K 10 3.0 0.5 15
TLCK475M004# 0402 K 4.7 4.0 0.5 15
TLCR686M004# 0805 R 68 4.0 2.7 5
TLCL226M006# 0603 L 22 6.3 1.4 7.5
TLCR476M006# 0805 R 47 6.3 3.0 5
RATINGS & PART NUMBER REFERENCE
# Refer to packaging suffix table for options.
All technical data relates to an ambient temperature of +25°C.
Capacitance and DF are measured at 120Hz, 0.5 RMS with
DC bias of 1.5V. DCL is measured at rated voltage after
5 minutes.
ESR allowed to move up to 1.25 times catalog limit post
mounting.
DCL allowed to move up to 2.00 times catalog limit post
mounting.
NOTE: AVX reserves the right to supply a higher voltage
rating in the same case size, to the same reliability
standards.
Voltage vs Temperature Rating
100% 100%
33%
67%
50%
20%
80% 80%
0%
20%
40%
60%
80%
100%
120%
-55°C 40°C0°C 60°C 85°C 125°C105°C
rated range
recommended derating
14
TAJ Series
Low Profile
Five additional case sizes are available in
the TAJ range offering low profile solid
tantalum chip capacitors. Designed for
applications where maximum height of
components above or below board are of
prime consideration, this height of 1.2,
1.5 and 2.0mm equates to that of a stan-
dard integrated circuit package after
mounting. The S&T footprints are identical
to the A&B case size parts and the W&Y
footprints to C&D case size parts.
CASE DIMENSIONS: millimeters (inches)
Code EIA L±0.20 (0.008) W+0.20 (0.008) H Max. W1±0.20 A+0.30 (0.012) S Min.
Code -0.10 (0.004) (0.008) -0.20 (0.008)
R* 2012-12 2.05 (0.081) 1.30 (0.051) 1.20 (0.047) 1.0 ±0.1 0.50 (0.020) 0.85 (0.033)
P2012-15 2.05 (0.081) 1.35 (0.053) 1.50 (0.059) 1.0 ±0.1 0.50 (0.020) 0.85 (0.033)
S** 3216-12 3.20 (0.126) 1.60 (0.063) 1.20 (0.047) 1.20 (0.047) 0.80 (0.031) 1.10 (0.043)
T** 3528-12 3.50 (0.138) 2.80 (0.110) 1.20 (0.047) 2.20 (0.087) 0.80 (0.031) 1.40 (0.055)
W** 6032-15 6.00 (0.236) 3.20 (0.126) 1.50 (0.059) 2.20 (0.087) 1.30 (0.051) 2.90 (0.114)
Y** 7343-20 7.30 (0.287) 4.30 (0.169) 2.00 (0.079) 2.40 (0.094) 1.30 (0.051) 4.40 (0.173)
X** 7343-15 7.30 (0.287) 4.30 (0.169) 1.50 (0.059) 2.40 (0.094) 1.30 (0.051) 4.40 (0.173)
* 0805 Footprint Compatible
** Low Profile Versions of A & B & C & D Case, respectively
W1dimension applies to the termination width for A dimensional area only.
Technical Data: All technical data relate to an ambient temperature of +25°C
Capacitance Range: 0.1µF to 680µF
Capacitance Tolerance: ±10%; ±20%
Rated Voltage (VR)+85°C: 2.5 4 6.3 10 16 20 25 35 50
Category Voltage (VC)+125°C: 1.7 2.7 4 7 10 13 17 23 33
Surge Voltage (VS)+85°C: 3.3 5.2 8 13 20 26 32 46 65
Surge Voltage (VS)+125°C: 2.2 3.4 5 8 13 16 20 28 40
Temperature Range: -55°C to +125°C
Reliability: 1% per 1000 hours at 85°C, VRwith 0.1Ω/V series impedance,
60% confidence level
Meets requirements of AEC-Q200
TECHNICAL SPECIFICATIONS
HOW TO ORDER
For part marking see page 121
TAJ
Type
Y
Case Size
See table
above
107
Capacitance Code
pF code: 1st two
digits represent
significant figures
3rd digit represents
multiplier (number of
zeros to follow)
M
Tolerance
K=±10%
M=±20%
010
Rated DC Voltage
002=2.5Vdc
004=4Vdc
006=6.3Vdc
010=10Vdc
016=16Vdc
020=20Vdc
025=25Vdc
035=35Vdc
050=50Vdc
R
Packaging
R = 7" T/R
(Lead Free since
production date 1/1/04)
S = 13" T/R
(Lead Free since
production date 1/1/04)
A = Gold Plating
7" Reel
B = Gold Plating
13" Reel
**
Additional
characters may be
added for special
requirements
(0.039±0.004)
(0.039±0.004)
15
TAJ Series
Low Profile
Capacitance Rated voltage DC (VR) to 85°C
µF Code 2.5V (e) 4V (G) 6.3V (J) 10V (A) 16V (C) 20V (D) 25V (E) 35V (V) 50V (T)
0.10 104 R/S R/S S
0.15 154 R/S R R/S S
0.22 224 R/S R R/S S
0.33 334 R/S R R/S T
0.47 474 R/S R/S R/S/T T
0.68 684 R/S R/S/T R/S S/T
1.0 105 R/S R/S/T R/S/T S S/T W
1.5 155 R/S R/S R/S R/S/T S/T T W
2.2 225 R/S R/S R/S R/S/T S/T T T
3.3 335 R/S R/S R/S/T R/S/T T T/W W Y
4.7 475 R R/S R/S/T R/S/T P/S/T T W W
6.8 685 R R/S/T R/S/T P/R/S/T S/T T W Y
10 106 R/S R/S/T R/S/T P
(M)
/S/T T/W W W X/Y
15 156 R R/S/T P/R/S/T S/T/W T
(M)
/W W Y Y
22 226 P/R P/R/S/T P
(M)
/S/T/W T/W W W/Y Y
33 336 P/S P
(M)
/S/T/W T/W W W/Y X/Y
47 476 P
(M)
/S T/W T/W W/Y W/X/Y Y
68 686 T T/W W W/Y X/Y Y
100 107 T/W T
(M)
/W W/Y W/X/Y Y
150 157 T
(M)
/W W/Y W/X/Y X
(M)
/Y
220 227 Y W/X/Y X/Y Y
330 337 Y X Y
470 477 Y Y
680 687 Y
1000 108 Y
(M)
CAPACITANCE AND VOLTAGE RANGE, VR(VOLTAGE CODE) RANGE
(LETTER DENOTES CASE SIZE)
Released codes
(M tolerance only)
Developmental Ratings - subject to change.
Note: Voltage ratings are minimum values. AVX reserves the right to supply higher
ratings in the same case size, to the same reliability standards.
16
Rated DCL DF ESR
AVX Case Capacitance Voltage (µA) % Max. (Ω)
Part No. Size (µF) (V) Max. Max. @100kHz
TAJR475*002# R 4.7 2.5 0.5 6 20
TAJR685*002# R 6.8 2.5 0.5 6 20
TAJR106*002# R 10 2.5 0.5 8 4.5
TAJS106*002# S 10 2.5 0.5 6 8
TAJR156*002# R 15 2.5 0.5 8 4.1
TAJP226*002# P 22 2.5 0.5 8 3.5
TAJR226*002# R 22 2.5 0.5 8 3.8
TAJP336*002# P 33 2.5 0.7 8 3.5
TAJS336*002# S 33 2.5 0.7 8 1.5
TAJP476M002# P 47 2.5 1.2 12 3.2
TAJS476*002# S 47 2.5 1.2 8 1.6
TAJT686*002# T 68 2.5 1.4 8 1.5
TAJT107*002# T 100 2.5 2.5 15 1.3
TAJW107*002# W 100 2.5 2.5 8 0.4
TAJT157M002# T 150 2.5 3.8 18 1.2
TAJW157*002# W 150 2.5 3.8 8 0.3
TAJY227*002# Y 220 2.5 5.5 8 0.3
TAJY337*002# Y 330 2.5 8.2 8 0.3
TAJY477*002# Y 470 2.5 11 12 0.2
TAJY687*002# Y 680 2.5 17 12 0.2
TAJY108M002# Y 108 2.5 25 30 0.2
TAJR225*004# R 2.2 4 0.5 6 25
TAJS225*004# S 2.2 4 0.5 6 25
TAJR335*004# R 3.3 4 0.5 6 20
TAJS335*004# S 3.3 4 0.5 6 18
TAJR475*004# R 4.7 4 0.5 6 12
TAJS475*004# S 4.7 4 0.5 6 10
TAJR685*004# R 6.8 4 0.5 6 5.2
TAJS685*004# S 6.8 4 0.5 6 8
TAJT685*004# T 6.8 4 0.5 6 6
TAJR106*004# R 10 4 0.5 6 7
TAJS106*004# S 10 4 0.5 6 6
TAJT106*004# T 10 4 0.6 6 5
TAJR156*004# R 15 4 0.6 8 4
TAJS156*004# S 15 4 0.6 8 4
TAJT156*004# T 15 4 0.6 6 2
TAJP226*004# P 22 4 0.9 8 5
TAJR226*004# R 22 4 0.9 8 3.8
TAJS226*004# S 22 4 0.9 8 3.5
TAJT226*004# T 22 4 0.9 6 1.9
TAJP336M004# P 33 4 1.3 8 3.4
TAJS336*004# S 33 4 1.3 8 1.7
TAJT336*004# T 33 4 1.3 6 1.7
TAJW336*004# W 33 4 1.3 6 0.6
TAJT476*004# T 47 4 1.9 10 2
TAJW476*004# W 47 4 1.9 6 0.5
TAJT686*004# T 68 4 2.7 15 1.5
TAJW686*004# W 68 4 2.7 6 0.4
TAJT107M004# T 100 4 4 14 1.4
TAJW107*004# W 100 4 4 6 1.3
TAJW157*004# W 150 4 6 6 1.3
TAJY157*004# Y 150 4 6 6 0.4
TAJW227*004# W 220 4 8.8 8 1.2
TAJX227*004# X 220 4 8.8 8 0.9
TAJY227*004# Y 220 4 8.8 8 0.3
TAJX337*004# X 330 4 13.2 8 0.1
TAJY477*004# Y 470 4 18.8 14 0.9
TAJR155*006# R 1.5 6.3 0.5 6 25
TAJS155*006# S 1.5 6.3 0.5 6 25
TAJR225*006# R 2.2 6.3 0.5 6 20
TAJS225*006# S 2.2 6.3 0.5 6 18
TAJ Series
Low Profile
RATINGS & PART NUMBER REFERENCE
Rated DCL DF ESR
AVX Case Capacitance Voltage (µA) % Max. (Ω)
Part No. Size (µF) (V) Max. Max. @100kHz
TAJR335*006# R 3.3 6.3 0.5 6 12
TAJS335*006# S 3.3 6.3 0.5 6 9
TAJR475*006# R 4.7 6.3 0.5 6 7
TAJS475*006# S 4.7 6.3 0.5 6 7.5
TAJT475*006# T 4.7 6.3 0.5 6 6
TAJR685*006# R 6.8 6.3 0.5 8 7
TAJS685*006# S 6.8 6.3 0.5 6 2.6
TAJT685*006# T 6.8 6.3 0.5 6 5
TAJR106*006# R 10 6.3 0.6 8 6
TAJS106*006# S 10 6.3 0.6 6 6
TAJT106*006# T 10 6.3 0.6 6 4
TAJP156*006# P 15 6.3 0.9 8 3.5
TAJR156*006# R 15 6.3 0.9 8 4.1
TAJS156*006# S 15 6.3 0.9 8 4
TAJT156*006# T 15 6.3 0.9 6 3.5
TAJP226M006# P 22 6.3 1.3 8 3.8
TAJS226*006# S 22 6.3 1.3 10 1.8
TAJT226*006# T 22 6.3 1.4 8 2.5
TAJW226*006# W 22 6.3 1.3 6 0.6
TAJT336*006# T 33 6.3 2.1 10 2.5
TAJW336*006# W 33 6.3 2.1 6 1.8
TAJT476*006# T 47 6.3 2.8 10 1.6
TAJW476*006# W 47 6.3 3 6 1.5
TAJW686*006# W 68 6.3 4.3 6 1.5
TAJY107*006# Y 100 6.3 6.3 6 0.9
TAJW107*006# W 100 6.3 6.3 6 0.9
TAJW157*006# W 157 6.3 9 8 0.3
TAJX157*006# X 150 6.3 9.5 6 0.9
TAJY157*006# Y 150 6.3 9 6 0.4
TAJX227*006# X 220 6.3 13.2 8 0.3
TAJY227*006# Y 220 6.3 13.9 10 0.9
TAJY337*006# Y 330 6.3 20.8 8 0.9
TAJR105*010# R 1 10 0.5 4 25
TAJS105*010# S 1 10 0.5 4 25
TAJR155*010# R 1.5 10 0.5 6 20
TAJS155*010# S 1.5 10 0.5 6 20
TAJR225*010# R 2.2 10 0.5 6 15
TAJS225*010# S 2.2 10 0.5 6 12
TAJR335*010# R 3.3 10 0.5 6 8
TAJS335*010# S 3.3 10 0.5 6 8
TAJT335*010# T 3.3 10 0.5 6 6
TAJR475*010# R 4.7 10 0.5 6 9
TAJS475*010# S 4.7 10 0.5 6 5
TAJT475*010# T 4.7 10 0.5 6 5
TAJP685*010# P 6.8 10 0.7 6 4
TAJR685*010# R 6.8 10 0.7 6 5.2
TAJS685*010# S 6.8 10 0.7 6 4
TAJT685*010# T 6.8 10 0.7 6 4
TAJP106M010# P 10 10 1 8 6
TAJS106*010# S 10 10 1 8 4
TAJT106*010# T 10 10 1 6 3
TAJS156*010# S 15 10 1.5 6 2
TAJT156*010# T 15 10 1.5 8 2.8
TAJW156*010# W 15 10 1.5 6 0.7
TAJT226*010# T 22 10 2.2 8 2.2
TAJW226*010# W 22 10 2.2 6 0.6
TAJW336*010# W 33 10 3.3 6 1.6
TAJW476*010# W 47 10 4.7 6 1.4
TAJY476*010# Y 47 10 4.7 6 0.5
TAJY686*010# Y 68 10 6.8 6 0.9
All technical data relates to an ambient temperature of +25°C. Capacitance and DF are measured at 120Hz, 0.5V RMS with a maximum DC bias of 2.2 volts.
DCL is measured at rated voltage after 5 minutes.
*Insert K for ±10% and M for ±20% # Standard Plating – Insert R for 7" reel and S for 13" reel
Capacitance Tolerance # Gold Plating – Insert A for 7" reel and B for 13" reel
NOTE: AVX reserves the right to supply a higher voltage rating or tighter tolerance part in the same case size, to the same reliability standards.
17
Rated DCL DF ESR
AVX Case Capacitance Voltage (µA) % Max. (Ω)
Part No. Size (µF) (V) Max. Max. @100kHz
TAJW686*010# W 68 10 6.8 6 1.3
TAJW107*010# W 100 10 10 6 0.4
TAJX107*010# X 100 10 10 8 0.9
TAJY107*010# Y 100 10 10 6 0.9
TAJX157M010# X 150 10 15 6 0.3
TAJY157*010# Y 150 10 15 6 1.2
TAJY227*010# Y 220 10 22 10 0.5
TAJR684*016# R 0.68 16 0.5 4 25
TAJS684*016# S 0.68 16 0.5 4 25
TAJR105*016# R 1 16 0.5 4 20
TAJS105*016# S 1 16 0.5 4 15
TAJT105*016# T 1 16 0.5 4 5
TAJR155*016# R 1.5 16 0.5 6 10
TAJS155*016# S 1.5 16 0.5 6 12
TAJR225*016# R 2.2 16 0.5 6 6.5
TAJS225*016# S 2.2 16 0.5 6 6
TAJT225*016# T 2.2 16 0.5 6 6.5
TAJR335*016# R 3.3 16 0.5 8 5
TAJS335*016# S 3.3 16 0.5 6 5
TAJT335*016# T 3.3 16 0.5 6 5
TAJP475*016# P 4.7 16 0.8 8 5
TAJS475*016# S 4.7 16 0.8 8 4.5
TAJT475*016# T 4.7 16 0.8 6 3.1
TAJS685*016# S 6.8 16 1.1 8 2.4
TAJT685*016# T 6.8 16 1.1 6 3.5
TAJT106*016# T 10 16 1.6 8 2.2
TAJW106*016# W 10 16 1.6 6 2
TAJT156M016# T 15 16 2.4 6 2
TAJW156*016# W 15 16 2.4 6 0.7
TAJW226*016# W 22 16 3.5 6 1.6
TAJW336*016# W 33 16 5.3 6 1.5
TAJY336*016# Y 33 16 5.3 6 0.9
TAJW476*016# W 47 16 7.5 6 0.4
TAJX476*016# X 47 16 7.5 6 0.9
TAJY476*016# Y 47 16 7.5 6 0.7
TAJX686*016# X 68 16 10.9 8 0.6
TAJY686*016# Y 68 16 10.9 6 0.9
TAJY107*016# Y 100 16 16 8 0.9
TAJR104*020# R 0.1 20 0.5 4 25
TAJS104*020# S 0.1 20 0.5 4 25
TAJR154*020# R 0.15 20 0.5 4 25
TAJS154*020# S 0.15 20 0.5 4 25
TAJR224*020# R 0.22 20 0.5 4 25
TAJS224*020# S 0.22 20 0.5 4 25
TAJR334*020# R 0.33 20 0.5 4 25
TAJS334*020# S 0.33 20 0.5 4 25
TAJR474*020# R 0.47 20 0.5 4 25
TAJS474*020# S 0.47 20 0.5 4 25
TAJR684*020# R 0.68 20 0.5 4 20
TAJS684*020# S 0.68 20 0.5 4 25
TAJT684*020# T 0.68 20 0.5 4 15
TAJR105*020# R 1 20 0.5 4 20
TAJS105*020# S 1 20 0.5 4 12
TAJT105*020# T 1 20 0.5 4 9
TAJR155*020# R 1.5 20 0.5 6 9.6
TAJS155*020# S 1.5 20 0.5 6 5
TAJT155*020# T 1.5 20 0.5 6 6.5
TAJS225*020# S 2.2 20 0.5 6 3
TAJT225*020# T 2.2 20 0.5 6 6
TAJT335*020# T 3.3 20 0.7 6 3
TAJ Series
Low Profile
RATINGS & PART NUMBER REFERENCE
Rated DCL DF ESR
AVX Case Capacitance Voltage (µA) % Max. (Ω)
Part No. Size (µF) (V) Max. Max. @100kHz
TAJT475*020# T 4.7 20 0.9 6 3
TAJT685*020# T 6.8 20 1.4 6 2.6
TAJW106*020# W 10 20 2 6 1.9
TAJW156*020# W 15 20 3 6 1.7
TAJY226*020# Y 22 20 4.4 6 0.9
TAJW226*020# W 22 20 4.4 6 1.6
TAJX336*020# X 33 20 6.6 6 0.5
TAJY336*020# Y 33 20 6.6 6 0.5
TAJY476*020# Y 47 20 9.4 6 0.4
TAJY686*020# Y 68 20 13.6 6 0.4
TAJR154*025# R 0.15 25 0.5 4 24
TAJR224*025# R 0.22 25 0.5 4 21
TAJR334*025# R 0.33 25 0.5 4 17
TAJR474*025# R 0.47 25 0.5 4 15
TAJS474*025# S 0.47 25 0.5 4 14
TAJR684*025# R 0.68 25 0.5 4 13
TAJS684*025# S 0.68 25 0.5 4 10
TAJS105*025# S 1 25 0.5 4 8
TAJS155*025# S 1.5 25 0.5 6 5.4
TAJT155*025# T 1.5 25 0.5 6 5
TAJT225*025# T 2.2 25 0.6 6 4.5
TAJT335*025# T 3.3 25 0.8 6 3.5
TAJW335*025# W 3.3 25 0.8 6 1.6
TAJW475*025# W 4.7 25 1.2 6 1.2
TAJW685*025# W 6.8 25 1.7 6 2
TAJW106*025# W 10 25 2.5 6 1.8
TAJY156*025# Y 15 25 3.8 6 1
TAJY226*025# Y 22 25 5.5 6 0.9
TAJR104*035# R 0.1 35 0.5 4 29
TAJS104*035# S 0.1 35 0.5 4 24
TAJR154*035# R 0.15 35 0.5 4 24
TAJS154*035# S 0.15 35 0.5 4 21
TAJR224*035# R 0.22 35 0.5 4 21
TAJS224*035# S 0.22 35 0.5 4 18
TAJR334*035# R 0.33 35 0.5 4 17
TAJS334*035# S 0.33 35 0.5 4 15
TAJR474*035# R 0.47 35 0.5 4 15
TAJS474*035# S 0.47 35 0.5 4 12
TAJT474*035# T 0.47 35 0.5 4 10
TAJS684*035# S 0.68 35 0.5 4 8
TAJT684*035# T 0.68 35 0.5 4 8
TAJS105*035# S 1 35 0.5 4 7.5
TAJT105*035# T 1 35 5 4 6.5
TAJT155*035# T 1.5 35 0.5 6 5.2
TAJT225*035# T 2.2 35 0.8 6 4.2
TAJW335*035# W 3.3 35 1.2 6 1.6
TAJW475*035# W 4.7 35 1.6 6 2.2
TAJY685*035# Y 6.8 35 2.3 6 0.9
TAJX106*035# X 10 35 3.5 6 0.7
TAJY106*035# Y 10 35 3.5 6 1
TAJY156*035# Y 15 35 5.3 6 0.6
TAJS104*050# S 0.1 50 0.5 4 19
TAJS154*050# S 0.15 50 0.5 4 16
TAJS224*050# S 0.22 50 0.5 4 13
TAJT334*050# T 0.33 50 0.5 4 11
TAJT474*050# T 0.47 50 0.5 4 9.5
TAJW105*050# W 1 50 0.5 6 4.4
TAJW155*050# W 1.5 50 0.8 6 3.1
TAJY335*050# Y 3.3 50 1.7 4 1.7
All technical data relates to an ambient temperature of +25°C. Capacitance and DF are measured at 120Hz, 0.5V RMS with a maximum DC bias of 2.2 volts.
DCL is measured at rated voltage after 5 minutes.
*Insert K for ±10% and M for ±20% # Standard Plating – Insert R for 7" reel and S for 13" reel
Capacitance Tolerance # Gold Plating – Insert A for 7" reel and B for 13" reel
NOTE: AVX reserves the right to supply a higher voltage rating or tighter
tolerance part in the same case size, to the same reliability standards.
%
%
18
TACmicrochip™
Low Profile
%
The flexibility of the TACmicrochip™
product line is once more demon-
strated by our ability to produce parts
with a profile as low as 0.60mm (max-
imum) with a maximum CV of 4.7µF
at 4V in an 0805 (2012M) footprint.
CASE DIMENSIONS: millimeters (inches)
Minimum
Code EIA EIA Length (L) Width (W) Height (H) Te rmination Te rmination Average
Code Metric Spacing(S) Length (Lt) Mass
N0402 1005-05 1.00 ±0.05 0.50 0.50 max. 0.40 min. 0.10 1.5mg
(0.039 ±0.002) (0.020 ) (0.020 max.) (0.004)
U0805 2012-06 2.00 1.35 0.60 max. 0.85 min. 0.15 8.9mg
(0.079 ) (0.053 ) (0.024 max.) (0.006)
H0805 2012-10 2.00 1.35 1.00 max. 0.85 min. 0.15 17.1mg
(0.079 ) (0.053 ) (0.039 max.) (0.006)
T3528 3528-12 3.50 2.80 1.20 max. 2.30 min. 0.15 65mg
(0.138 ) (0.110 ) (0.047 max.) (0.006)
L
SLt W
H
POLARITY BAND NOT TO
EXCEED CENTER LINE
+0.00
-0.10
+0.000
-0.004
Packaging Suffix
CUSTOM CASE DIMENSIONS: millimeters (inches)
Minimum
Code EIA EIA Length (L) Width (W) Height (H) Termination Termination Average
Code Metric Spacing(S) Length (Lt) Mass
X1105 3015-15 3.00±0.10 1.45±0.10 1.45±0.10 2.00 min. 0.15 39.4mg
(0.118±0.004) (0.057±0.004) (0.057±0.004) (0.006)
Technical Data: All technical data relate to an ambient temperature of +25°C
Capacitance Range: 1.0µF to 68µF
Capacitance Tolerance: ±10%; ±20%
Leakage Current DCL: 0.01CV or 0.5µA whichever is the greater
Rated Voltage (VR)+85°C: 2 3 4 6.3 10 16
Category Voltage (VC)+125°C: 1.3 2 2.7 4 7 10
Surge Voltage (VS)+85°C: 2.7 3.9 5.2 8 13 20
Surge Voltage (VS)+125°C: 1.7 2.6 3.2 5 8 12
Temperature Range: -55°C to +125°C
Reliability: 1% per 1000 hours at 85°C, V with 0.1Ω/V series impedance,
60% confidence level
Termination Finish: Nickel and Tin Plating (standard),
Nickel and Gold Plating option available upon request
TECHNICAL SPECIFICATIONS
+0.20
-0.00
+0.008
-0.000
+0.15
-0.00
+0.006
-0.000
+0.20
-0.00
+0.008
-0.000
+0.15
-0.00
+0.006
-0.000
+0.20
-0.20
+0.008
-0.008
+0.20
-0.10
+0.008
-0.004
Standard Standard
Reel Tin Termination Tin Termination Gold Termination
Size Plastic Tape Paper Tape Plastic Tape
Case T/H/J N T/H/J
7" RTA PTA ATA
41⁄4"XTA QTAFTA
TAC
Type
TACmicrochip™
U
Case Size
0402=N
0805=U
0805=H
3528=T
1105=X
475
Capacitance Code
pF code: 1st two digits
represent significant figures,
3rd digit represents multiplier
(number of zeros to follow)
M
Tolerance
K=±10%
M=±20%
004
Rated DC Voltage
002=2Vdc
003=3Vdc
004=4Vdc
006=6.3Vdc
010=10Vdc
016=16Vdc
R
Packaging
(see table below)
TA
Alternative
characters may
be used for
special
requirements
HOW TO ORDER
ENVIRONMENTAL FRIENDLY
COMPONENT
19
TACmicrochip™
Low Profile
RATINGS & PART NUMBER REFERENCE
Developmental Ratings - subject to change
All technical data relates to an ambient temperature of +25°C. Capacitance and
DF are measured at 120Hz, 0.5V RMS with a maximum DC bias of 2.2 volts.
DCL is measured at rated voltage after 5 minutes.
*Insert K for ±10% and M for ±20% Capacitance Tolerance
#Refer to packaging suffix for options
NOTE: AVX reserves the right to supply a higher voltage rating or tighter
tolerance part in the same case size, to the same reliability standards.
** EIA Metric
Standard Height Profile: K, L, R, A Case
Low Profile: N, U, H, T, WCase
Custom Low Profile: X Case
Rated DCL DF ESR
AVX EIA Case Capacitance Voltage (µA) % Max. (Ω)
Part No. Size (µF) (V) Max. Max. @100kHz
TACN105M006# 0402 N 1.0 6.3 0.5 8 20
TACU106M002# 0805 U 10 2.0 0.5 8 5
TACU475M004# 0805 U 4.7 4.0 0.5 8 5
TACU335M006# 0805 U 3.3 6.3 0.5 8 5
TACU225M010# 0805 U 2.2 10.0 0.5 8 5
TACU105M016# 0805 U 1.0 16.0 0.5 8 5
TACH476M003# 0805 H 47 3.0 1.5 14 5
TACH336M004# 0805 H 33 4.0 1.3 14 5
TACH156*006# 0805 H 15 6.3 0.9 8 5
TACH226*006# 0805 H 22 6.3 1.4 10 5
TACH106M010# 0805 H 10 10.0 1.0 8 5
TACT476M010# 3528-12** T 47 10.0 4.7 10 1
TACT686M006# 3528-12** T 68 6.3 4.3 12 1
TACT107M006# 3528-12** T 100 6.3 6.3 12 1
TACX686*003# special X683.0 1.5 12 1
LOW PROFILE & CUSTOM RANGE (LETTER DENOTES CASE SIZE)
Developmental Ratings - subject to change
Capacitance Voltage Rating DC (VR) at 85°C
Cap. (µF) Code 2.0V 3.0V 4.0V 6.3V 10V 16V
0.33 334
0.47 474
0.68 684
1.0 105 NU
1.5 155
2.2 225 U
3.3 335 U
4.7 475 U U
6.8 685
10 106 U H
15 156 H
22 226 H
33 336 H
47 476 HT
68 686 X T
100 107 T
150 157
220 227
330 107
470 157
680 227
20
Capacitance Voltage Rating DC (VR) at 85°C
Cap. (µF) Code 3.0V 4.0V 6.3V 10V 16V
33 336
47 476 H
68 686 HH F
100 107 HHFX
150 157 HH FX
220 227 HF X
330 337 FX Y
470 477 XYW
680 687 YW
1000 108 YW
1500 158 W
2200 228
TAK Series
Low Profile - Performance TACmicrochip™
Building on the miniature substrate
design concept of the TACmicrochip™
product, a new TAK™ construction has
been developed to enable higher CV
offerings (in excess of 100µF at 6V) in a
low profile format.
Profile height for the 100µF at 6.3V
product will be 1.0mm and the 150µF-
220µF will be 1.2mm max. This product
is configured as a two-terminal device.
The substrate top plate allows for efficient
dissipation of heat thus improving ripple
current handling capabilities.
COMMERCIAL RANGE (LETTER DENOTES CASE SIZE)
Developmental Ratings - subject to change
KEY FEATURES
Case Rated DCL DF ESR
AVX EIA Size
Capacitance Voltage (µA) % Max. (mΩ)
Part No. (µF) (V) Max. Max. @100kHz
TAKH107M006# 7343-10 H 100 6.3 6.3 12 200
TAKF157M006# 7343-12 F 150 6.3 9.5 12 200
TAKX227M006# 7343-15 X 220 6.3 13.9 12 200
TAKY108M003# 7343-20 Y 1000 3.0 30 20 100
RATINGS & PART NUMBER REFERENCE
H
POLARITY MARK
W
L
%
%
%
Case EIA Length Width Height
Code Metric Max.
W7343-25 7.30 (0.287) 4.30 (0.169) 2.50 (0.098)
Y7343-20 7.30 (0.287) 4.30 (0.169) 2.00 (0.079)
X7343-15 7.30 (0.287) 4.30 (0.169) 1.50 (0.059)
F7343-12 7.30 (0.287) 4.30 (0.169) 1.20 (0.047)
H7343-10 7.30 (0.287) 4.30 (0.169) 1.00 (0.039)
Items highlighted in red are subject to technical specification change.
DIMENSIONS: millimeters (inches)
All TAK products based on “D” case footprint
21
TPS Series
Low ESR
HOW TO ORDER
TPS surface mount products have inher-
ently low ESR (equivalent series resistance)
and are capable of higher ripple current
handling, producing lower ripple voltages,
less power and heat dissipation than stan-
dard product for the most efficient use of
circuit power. TPS has been designed,
manufactured, and preconditioned for
optimum performance in typical power
supply applications. By combining the
latest improvements in tantalum powder
technology, improved manufacturing
processes, and application specific pre-
conditioning tests, AVX is able to provide a
technologically superior alternative to the
standard range.
Technical Data: All technical data relate to an ambient temperature of +25°C
Capacitance Range: 0.15µF to 1500µF
Capacitance Tolerance: ±10%; ±20%
Rated Voltage (VR)+85°C: 2.5 4 6.3 10 16 20 25 35 50
Category Voltage (VC) +125°C: 1.7 2.7 4 7 10 13 17 23 33
Surge Voltage (VS) +85°C: 3.3 5.2 8 13 20 26 32 46 65
Surge Voltage (VS) +125°C: 2.2 3.4 5 8 13 16 20 28 40
Temperature Range: -55°C to +125°C
Environmental Classification: 55/125/56 (IEC 68-2)
Reliability: 1% per 1000 hours at 85°C, VRwith 0.1Ω/V series impedance,
60% confidence level
Meets requirements of AEC-Q200
TECHNICAL SPECIFICATIONS
CASE DIMENSIONS: millimeters (inches)
Code EIA Dimension L±0.20 W+0.20 (0.008) H+0.20 (0.008) W1±0.20 A+0.30 (0.012) S Min.
Code Low Profile (0.008) -0.10 (0.004) -0.10 (0.004) (0.008) -0.20 (0.008)
A3216-18 – 3.20 (0.126) 1.60 (0.063) 1.60 (0.063) 1.20 (0.047) 0.80 (0.031) 1.10 (0.043)
B3528-21 – 3.50 (0.138) 2.80 (0.110) 1.90 (0.075) 2.20 (0.087) 0.80 (0.031) 1.40 (0.055)
C6032-28 – 6.00 (0.236) 3.20 (0.126) 2.6 (0.102) 2.20 (0.087) 1.30 (0.051) 2.90 (0.114)
D7343-31 – 7.30 (0.287) 4.30 (0.169) 2.90 (0.114) 2.40 (0.094) 1.30 (0.051) 4.40 (0.173)
E7343-43 – 7.30 (0.287) 4.30 (0.169) 4.10 (0.162) 2.40 (0.094) 1.30 (0.051) 4.40 (0.173)
P* 2012-15 -2.05 (0.081) 1.35 (0.053) 1.50 (0.059) 1.0±0.1 0.50 (0.020) 0.85 (0.033)
max. (0.039 ±0.004)
R* 2012-12 R Case (1.20) 2.05 (0.081) 1.30 (0.051) 1.20 (0.047) 1.0 ±0.1 0.50 (0.020) 0.85 (0.033)
max. (0.039 ±0.004)
S** 3216-12 A Case (1.20) 3.20 (0.126) 1.60 (0.063) 1.20 (0.047) max. 1.20 (0.047) 0.80 (0.031) 1.10 (0.043)
T** 3528-12 B Case (1.20) 3.50 (0.138) 2.80 (0.110) 1.20 (0.047) max. 2.20 (0.087) 0.80 (0.031) 1.40 (0.055)
V7361-38 –7.30 (0.287) 6.10 (0.240) 3.45 ±0.30 3.10 (0.120) 1.40 (0.055) 4.40 (0.173)
(0.136 ±0.012)
W** 6032-15 C Case (1.50) 6.00 (0.236) 3.20 (0.126) 1.50 (0.059) max. 2.20 (0.087) 1.30 (0.051) 2.90 (0.114)
X** 7343-15 D Case (1.50) 7.30 (0.287) 4.30 (0.169) 1.50 (0.059) max. 2.40 (0.094) 1.30 (0.051) 4.40 (0.173)
Y** 7343-20 D Case (2.00) 7.30 (0.287) 4.30 (0.169) 2.00 (0.079) max. 2.40 (0.094) 1.30 (0.051) 4.40 (0.173)
W1dimension applies to the termination width for A dimensional area only.
* 0805 Footprint Compatible ** Low Profile Versions of A & B & C & D Case
For part marking see page 121
TPS
Type
C
Case Size
See table
above
107
Capacitor Code
pF code: 1st two
digits represent
significant figures,
3rd digit represents
multiplier (number of
zeros to follow)
M
Tolerance
K = ±10%
M = ±20%
010
Rated DC Voltage
002 = 2.5Vdc
004 = 4Vdc
006 = 6.3Vdc
010 = 10Vdc
016 = 16Vdc
020 = 20Vdc
025 = 25Vdc
035 = 35Vdc
050 = 50Vdc
R
Packaging
R = 7" T/R
(Lead Free since
production date 1/1/04)
S = 13" T/R
(Lead Free since
production date 1/1/04)
A = Gold Plating
7" Reel
B = Gold Plating
13" Reel
0100
Maximum ESR in
Milliohms
See note below
NOTE: The EIA & CECC standards for low ESR Solid Tantalum Capacitors
allow an ESR movement to 1.25 times catalog limit post mounting.
22
ESR limits quoted in brackets (milliohms)For C, D and E case ratings in TPS Series, ESR ratings are printed on capacitor side in the
following format:
T x x x -where x x x is ESR limit in milliohms i.e. T100 represents max. ESR of 100 milliohms.
Released codes
(M tolerance only)
NOTE: The EIA & CECC standards for low ESR Solid Tantalum Capacitors
allow an ESR movement to 1.25 times catalog limit post mounting.
Capacitance Rated Voltage DC (VR) to 85°C
µF Code 2.5V (e) 4V (G) 6.3V (J) 10V (A) 16V (C) 20V (D) 25V (E) 35V (V) 50V (T)
0.15 154 A(9000)
0.22 224 A(6000) A(7000)
0.33 334 A(6000)
0.47 474 A(7000) A(6000)
B(4000)
0.68 684 A(6000) A(6000)
1 105 R(9000) A(3000), R(6000) A(3000) C(2500)
S(6000), T(2000) B(2000)
1.5 155 A(3000) B(2500) C(1500,2000)
B(1800)
2.2 225 R(7000) A(1800) A(1800,3500) A(3000) B(900,1200,2500) A(1500), B(750, D(1200)
T(2000) 1500,2000), C(1000)
3.3 335 T(1500) A(3500) A(2500) A(1000,1500) B(1000) D(800)
B(1300) B(750,1500,2000) C(700)
4.7 475 S(4000) A(1400) A(2000) A(1800)
B(700,900,1500) B(700,1500) D(300,500,700)
R(3000,5000) B(800,1500) B(750,1000) C(600)
A(1000)
6.8 685 A(1800) A(1800) A(1500) B(600,1000) B(700) C(350) D(300,500,600)
T(1800) B(600,1200)
C(700) C(500,600,700) D(150,400,500)
A(1500) A(900,1800) B(500,800), C(500)
10 106 R(3000) R(1000,1500,3000) P(2000)
(M)
T(800,1000) B(500,1000)
C(300,500) D(125,300) E(400,500)
T(1000,2000) W(500,600) C(500,700) E(200)
A(1000) B(500) C(220,300) C(350,450)
15 156 A(700,1500) B(450,600) B(500,800) C(400,450) D(100,300) D(100,300) E(250)
Y(250)
A(500,900) B(400,500,700) B(400,600) B(400,600) D(125,200,
22 226 B(375,600) C(300) C(150,250,300,375) C(100,150,400) C(275,400) 300,400)
S(900) T(800) W(500) D(200,300) D(100,200,300) E(125,200,300)
B(350,500)
A(600) B(250,425,500,650) C(100,150,225,300) C(300) D(100,200,300) D(200,300)
33 336 B(250,350,450,600) C(150,375,500) D(200), W(140,175, D(100,200) E(100,175, E(100,250,300)
T(800) W(350) 250,400,500) 200,300) V(200)
Y(300,400)
A(800) B(250,350,500,650) C(110,350)
47 476 A(500) B(250,350,500) C(200,350) D(80,100, D(75,100,200) D(125,150,250) E(200,250)
C(300) D(100) 150,200) W(200) E(70,125,150, E(80,100,125) V(150,200)
W(125,150,250) Y(250), X(180) 200,250)
B(600)
B(250,350,500) C(80,100,200,300) C(125,200) D(70,150, E(125,200)
68 686 C(150,200) D(100,150), Y(100,200) D(70,100,150) 200,300) V(80,95,150,200) V(150,200)
(M)
W(110,125,250) W(100,150) Y(200,250), X(150) E(125,150,200)
B(400)
(M)
D(60,100,
B(200,250, B(250,400) C(75,100,150,200) 125,150) D(85,100,150)
100 107 B(200) 350,500) C(75,150) D(50,65,80,100,125, E(55,100, E(100,150,200) V(100)
W(100) Y(100) 150) E(125) W(150) 125,150) V(60,85,100,200)
W(100) X(85,150,200)
Y(100,150,200)
150 157 B(150) B(250) C(50,90,150,200,250) D(50,85,100), E(100) D(60,85,100,125,150) V(80)
C(70,80) D(50,125), Y(40)
X(100)(M), Y(100,150,200)
E(100), V(45,75)
B(150, C(70,100,125,250) D(50,100,150) E(100,150)
220 227 200,600) D(40,50,100) D(50,100,125) E(50,60,70,100, V(50,75,
D(45)Y(40) E(100) 125,150) 100,150)
Y(100,150) Y(150,200)
C(100) D(45,50,70,100) D(50,65,100,150)
330 337 Y(40) D(35,45,100) E(50,100,125,150) E(40,50,60,100)
X(100) V(100), Y(150) V(40,60,100)
D(35) D(45,60,100,200)
470 477 Y(100)
D(45,100) E(45,50,60,100,200) E(45,50,60,100,200)
E(35,45,100) V(40,55,100) V(40,60,100)
D(35,50) D(45,60,100) E(45,60,100)
680 687 E(35,50) E(40,60,100) V(35,40,50)
Y(100)
1000 108 E(30,40) E(60) V(40,50)
(M)
Y(100)
(M)
V(25,35,40,50)
1500 158 E(50) E(50,75)
V(30,40) V(50,75)
(M)
TPS Series
Low ESR
CAPACITANCE AND RATED VOLTAGE, VR(VOLTAGE CODE) RANGE
(LETTER DENOTES CASE SIZE)
23
TPS Series
Low ESR
RATINGS & PART NUMBER REFERENCE
All technical data relates to an ambient temperature of +25°C.
Capacitance and DF are measured at 120Hz, 0.5V RMS with a maximum
DC bias of 2.2 volts. DCL is measured at rated voltage after 5 minutes.
* Insert K for ±10% and M for ±20% Capacitance Tolerance
# Standard Plating – Insert R for 7" reel and S for 13" reel
# Gold Plating – Insert A for 7" reel and B for 13" reel
Rated DCL DF ESR
100kHz Ripple Current Ratings (A) 100kHz Ripple Voltage Ratings (V)
AVX Case Capacitance Voltage (µA) % Max. (mΩ)
Part No. Size (µF) (V) Max. Max. @100kHz 25ºC 85ºC 125ºC 25ºC 85ºC 125ºC
TPSB107*002#0200 B 100 2.5 5 6 200 0.652 0.587 0.261 0.130 0.117 0.052
TPSB157*002#0150 B 150 2.5 3 10 150 0.753 0.677 0.301 0.113 0.102 0.045
TPSB227*002#0150 B 220 2.5 4.4 16 150 0.753 0.677 0.301 0.113 0.102 0.045
TPSB227*002#0200 B 220 2.5 4.4 16 200 0.652 0.587 0.261 0.130 0.117 0.052
TPSB227*002#0600 B 220 2.5 4.4 16 600 0.376 0.339 0.151 0.226 0.203 0.090
TPSD227*002#0045 D 220 2.5 4.4 8 45 1.826 1.643 0.730 0.082 0.074 0.033
TPSY337*002#0040 Y 330 2.5 8.2 8 40 1.768 1.591 0.707 0.071 0.064 0.028
TPSD477*002#0035 D 470 2.5 11.6 8 35 2.070 1.863 0.828 0.072 0.065 0.029
TPSY477*002#0100 Y 470 2.5 11 12 100 1.118 1.006 0.447 0.112 0.101 0.045
TPSD687*002#0035 D 680 2.5 17 16 35 2.070 1.863 0.828 0.072 0.065 0.029
TPSD687*002#0050 D 680 2.5 17 16 50 1.732 1.559 0.693 0.087 0.078 0.035
TPSE687*002#0035 E 680 2.5 17 10 35 2.171 1.954 0.868 0.076 0.068 0.030
TPSE687*002#0050 E 680 2.5 17 10 50 1.817 1.635 0.727 0.091 0.082 0.036
TPSY687*002#0100 Y 680 2.5 17 12 100 1.118 1.006 0.447 0.112 0.101 0.045
TPSE108*002#0030 E 1000 2.5 20 14 30 2.345 2.111 0.938 0.070 0.063 0.028
TPSE108*002#0040 E 1000 2.5 20 14 40 2.031 1.828 0.812 0.081 0.073 0.032
TPSY108M002#0100 Y 1000 2.5 25 30 100 1.118 1.006 0.447 0.112 0.101 0.045
TPSE158*002#0050 E 1500 2.5 37.5 20 50 1.817 1.635 0.727 0.001 0.082 0.036
TPSV158*002#0030 V 1500 2.5 30 20 30 2.887 2.598 1.155 0.087 0.078 0.035
TPSV158*002#0040 V 1500 2.5 30 20 40 2.500 2.250 1.000 0.100 0.090 0.040
TPSR106*004#3000 R 10 4 0.5 6 3000 0.135 0.122 0.054 0.406 0.366 0.162
TPSA476*004#0500 A 47 4 1.9 8 500 0.387 0.349 0.155 0.194 0.174 0.077
TPSB107*004#0200 B 100 4 4 8 200 0.652 0.587 0.261 0.130 0.117 0.052
TPSB107*004#0250 B 100 4 4 8 250 0.583 0.525 0.233 0.146 0.131 0.058
TPSB107*004#0350 B 100 4 4 8 350 0.493 0.444 0.197 0.172 0.155 0.069
TPSB107*004#0500 B 100 4 4 8 500 0.412 0.371 0.165 0.206 0.186 0.082
TPSW107*004#0100 W 100 4 4 6 100 0.949 0.854 0.379 0.095 0.085 0.038
TPSB157*004#0250 B 150 4 6 10 250 0.583 0.525 0.233 0.146 0.131 0.058
TPSC157*004#0070 C 150 4 6 6 70 1.254 1.128 0.501 0.088 0.079 0.035
TPSC157*004#0080 C 150 4 6 6 80 1.173 1.055 0.469 0.094 0.084 0.038
TPSD227*004#0040 D 220 4 8.8 8 40 1.936 1.743 0.775 0.077 0.070 0.031
TPSD227*004#0050 D 220 4 8.8 8 50 1.732 1.559 0.693 0.087 0.078 0.035
TPSD227*004#0100 D 220 4 8.8 8 100 1.225 1.102 0.490 0.122 0.110 0.049
TPSY227*004#0040 Y 220 4 8.8 8 40 1.768 1.591 0.707 0.071 0.064 0.028
TPSC337*004#0100 C 330 4 13.2 8 100 1.049 0.944 0.420 0.105 0.094 0.042
TPSD337*004#0035 D 330 4 13.2 8 35 2.070 1.863 0.828 0.072 0.065 0.029
TPSD337*004#0045 D 330 4 13.2 8 45 1.826 1.643 0.730 0.082 0.074 0.033
TPSD337*004#0100 D 330 4 13.2 8 100 1.225 1.102 0.490 0.122 0.110 0.049
TPSX337*004#0100 X 330 4 13.2 8 100 1.000 0.900 0.400 0.100 0.090 0.040
TPSD477*004#0045 D 470 4 18.8 12 45 1.826 1.643 0.730 0.082 0.074 0.033
TPSD477*004#0100 D 470 4 18.8 12 100 1.225 1.102 0.490 0.122 0.110 0.049
TPSE477*004#0035 E 470 4 18.8 12 35 2.171 1.954 0.868 0.076 0.068 0.030
TPSE477*004#0045 E 470 4 18.8 12 45 1.915 1.723 0.766 0.086 0.078 0.034
TPSE477*004#0100 E 470 4 18.8 12 100 1.285 1.156 0.514 0.128 0.116 0.051
TPSD687*004#0045 D 680 4 27.2 14 45 1.915 1.643 0.730 0.082 0.074 0.033
TPSD687*004#0060 D 680 4 27.2 14 60 1.581 1.423 0.632 0.095 0.085 0.038
TPSD687*004#0100 D 680 4 27.2 14 100 1.225 1.102 0.490 0.122 0.110 0.049
TPSE687*004#0040 E 680 4 27.2 10 40 2.031 1.828 0.812 0.081 0.073 0.032
TPSE687*004#0060 E 680 4 27.2 10 60 1.658 1.492 0.663 0.099 0.090 0.040
TPSE687*004#0100 E 680 4 27.2 10 100 1.285 1.156 0.514 0.128 0.116 0.051
TPSE108*004#0060 E 1000 4 40 14 60 1.658 1.492 0.663 0.099 0.090 0.040
TPSV108*004#0025 V 1000 4 40 16 25 3.162 2.846 1.265 0.079 0.071 0.032
TPSV108*004#0035 V 1000 4 40 16 35 2.673 2.405 1.069 0.094 0.084 0.037
TPSV108*004#0040 V 1000 4 40 16 40 2.500 2.250 1.000 0.100 0.090 0.040
TPSV108*004#0050 V 1000 4 40 16 50 2.236 2.012 0.894 0.112 0.101 0.045
TPSE158*004#0050 E 1500 4 60 30 50 1.817 1.635 0.727 0.091 0.082 0.036
TPSE158*004#0075 E 1500 4 60 30 75 1.483 1.335 0.593 0.111 0.100 0.044
TPSV158M004#0050 V 1500 4 60 30 50 2.236 2.012 0.894 0.112 0.101 0.045
TPSV158M004#0075 V 1500 4 60 30 75 1.826 1.643 0.730 0.137 0.123 0.055
TPSR225*006#7000 R 2.2 6.3 0.5 6 7000 0.089 0.080 0.035 0.620 0.558 0.248
TPSS475*006#4000 S 4.7 6.3 0.5 6 4000 0.127 0.115 0.051 0.510 0.459 0.204
TPSA685*006#1800 A 6.8 6.3 0.5 6 1800 0.204 0.184 0.082 0.367 0.331 0.147
TPSA106*006#1500 A 10 6.3 0.6 6 1500 0.224 0.201 0.089 0.335 0.302 0.134
TPSR106*006#1000 R 10 6.3 0.6 8 1000 0.235 0.211 0.094 0.235 0.211 0.094
TPSR106*006#1500 R 10 6.3 0.6 8 1500 0.191 0.172 0.077 0.287 0.259 0.115
TPSR106*006#3000 R 10 6.3 0.6 8 3000 0.135 0.122 0.054 0.406 0.366 0.162
TPSA156*006#0700 A 15 6.3 0.9 6 700 0.327 0.295 0.131 0.229 0.206 0.092
TPSA156*006#1500 A 15 6.3 0.9 6 1500 0.224 0.201 0.089 0.335 0.302 0.134
TPSA226*006#0500 A 22 6.3 1.4 6 500 0.387 0.349 0.155 0.194 0.174 0.077
TPSA226*006#0900 A 22 6.3 1.4 6 900 0.289 0.260 0.115 0.260 0.234 0.104
24
TPS Series
Low ESR
RATINGS & PART NUMBER REFERENCE
All technical data relates to an ambient temperature of +25°C.
Capacitance and DF are measured at 120Hz, 0.5V RMS with a maximum
DC bias of 2.2 volts. DCL is measured at rated voltage after 5 minutes.
* Insert K for ±10% and M for ±20% Capacitance Tolerance
# Standard Plating – Insert R for 7" reel and S for 13" reel
# Gold Plating – Insert A for 7" reel and B for 13" reel
Rated DCL DF ESR
100kHz Ripple Current Ratings (A) 100kHz Ripple Voltage Ratings (V)
AVX Case Capacitance Voltage (µA) % Max. (mΩ)
Part No. Size (µF) (V) Max. Max. @100kHz 25ºC 85ºC 125ºC 25ºC 85ºC 125ºC
TPSB226*006#0375 B 22 6.3 1.4 6 375 0.476 0.428 0.190 0.179 0.161 0.071
TPSB226*006#0600 B 22 6.3 1.4 6 600 0.376 0.339 0.151 0.226 0.203 0.090
TPSS226*006#0900 S 22 6.3 1.4 8 900 0.269 0.242 0.107 0.242 0.218 0.097
TPSA336*006#0600 A 33 6.3 2.1 8 600 0.354 0.318 0.141 0.212 0.191 0.085
TPSB336*006#0250 B 33 6.3 2.1 6 250 0.583 0.525 0.233 0.146 0.131 0.058
TPSB336*006#0350 B 33 6.3 2.1 6 350 0.493 0.444 0.197 0.172 0.155 0.069
TPSB336*006#0450 B 33 6.3 2.1 6 450 0.435 0.391 0.174 0.196 0.176 0.078
TPSB336*006#0600 B 33 6.3 2.1 6 600 0.376 0.339 0.151 0.226 0.203 0.090
TPST336*006#0800 T 33 6.3 2.1 10 800 0.316 0.285 0.126 0.253 0.228 0.101
TPSA476*006#0800 A 47 6.3 2.8 10 800 0.306 0.276 0.122 0.245 0.220 0.098
TPSB476*006#0250 B 47 6.3 3 6 250 0.583 0.525 0.233 0.146 0.131 0.058
TPSB476*006#0350 B 47 6.3 3 6 350 0.493 0.444 0.197 0.172 0.155 0.069
TPSB476*006#0500 B 47 6.3 3 6 500 0.412 0.371 0.165 0.206 0.186 0.082
TPSC476*006#0300 C 47 6.3 3 6 300 0.606 0.545 0.242 0.182 0.163 0.073
TPSB686*006#0250 B 68 6.3 4.3 8 250 0.583 0.525 0.233 0.146 0.131 0.058
TPSB686*006#0350 B 68 6.3 4.3 8 350 0.493 0.444 0.197 0.172 0.155 0.069
TPSB686*006#0500 B 68 6.3 4.3 8 500 0.412 0.371 0.165 0.206 0.186 0.082
TPSC686*006#0150 C 68 6.3 4.3 6 150 0.856 0.771 0.343 0.128 0.116 0.051
TPSC686*006#0200 C 68 6.3 4.3 6 200 0.742 0.667 0.297 0.148 0.133 0.059
TPSW686*006#0110 W 68 6.3 4.3 6 110 0.905 0.814 0.362 0.099 0.090 0.040
TPSW686*006#0125 W 68 6.3 4.3 6 125 0.849 0.764 0.339 0.106 0.095 0.042
TPSW686*006#0250 W 68 6.3 4.3 6 250 0.600 0.540 0.240 0.150 0.135 0.060
TPSB107*006#0250 B 100 6.3 6.3 10 250 0.583 0.525 0.233 0.146 0.131 0.058
TPSB107*006#0400 B 100 6.3 6.3 10 400 0.461 0.415 0.184 0.184 0.166 0.074
TPSC107*006#0075 C 100 6.3 6.3 6 75 1.211 1.090 0.484 0.091 0.082 0.036
TPSC107*006#0150 C 100 6.3 6.3 6 150 0.856 0.771 0.343 0.128 0.116 0.051
TPSY107*006#0100 Y 100 6.3 6.3 6 100 1.118 1.006 0.447 0.112 0.101 0.045
TPSW107*006#0100 W 100 6.3 6.3 6 100 0.949 0.854 0.379 0.095 0.085 0.038
TPSC157*006#0050 C 150 6.3 9.5 6 50 1.483 1.335 0.593 0.074 0.067 0.030
TPSC157*006#0090 C 150 6.3 9.5 6 90 1.106 0.995 0.442 0.099 0.090 0.040
TPSC157*006#0150 C 150 6.3 9.5 6 150 0.856 0.771 0.343 0.128 0.116 0.051
TPSC157*006#0200 C 150 6.3 9.5 6 200 0.742 0.667 0.297 0.148 0.133 0.059
TPSC157*006#0250 C 150 6.3 9.5 6 250 0.663 0.597 0.265 0.166 0.149 0.066
TPSD157*006#0050 D 150 6.3 9.5 6 50 1.732 1.559 0.693 0.087 0.078 0.035
TPSD157*006#0125 D 150 6.3 9.5 6 125 1.095 0.986 0.438 0.137 0.123 0.055
TPSY157*006#0040 Y 150 6.3 9.5 6 40 1.768 1.591 0.707 0.071 0.064 0.028
TPSC227*006#0070 C 220 6.3 13.9 8 70 1.254 1.128 0.501 0.088 0.079 0.035
TPSC227*006#0100 C 220 6.3 13.9 8 100 1.049 0.944 0.420 0.105 0.094 0.042
TPSC227*006#0125 C 220 6.3 13.9 8 125 0.938 0.844 0.375 0.117 0.106 0.047
TPSC227*006#0250 C 220 6.3 13.9 8 250 0.663 0.597 0.265 0.166 0.149 0.066
TPSD227*006#0050 D 220 6.3 13.9 8 50 1.732 1.559 0.693 0.087 0.078 0.035
TPSD227*006#0100 D 220 6.3 13.2 8 100 1.225 1.102 0.490 0.122 0.110 0.049
TPSD227*006#0125 D 220 6.3 13.9 8 125 1.095 0.986 0.438 0.137 0.123 0.055
TPSE227*006#0100 E 220 6.3 13.2 8 100 1.285 1.156 0.514 0.128 0.116 0.051
TPSY227*006#0100 Y 220 6.3 13.9 10 100 1.118 1.006 0.447 0.112 0.101 0.045
TPSY227*006#0150 Y 220 6.3 13.9 10 150 0.913 0.822 0.365 0.137 0.123 0.055
TPSD337*006#0045 D 330 6.3 20.8 8 45 1.826 1.643 0.730 0.082 0.074 0.033
TPSD337*006#0050 D 330 6.3 20.8 8 50 1.732 1.559 0.693 0.087 0.078 0.035
TPSD337*006#0070 D 330 6.3 20.8 8 70 1.464 1.317 0.586 0.102 0.092 0.041
TPSD337*006#0100 D 330 6.3 20.8 8 100 1.225 1.102 0.490 0.122 0.110 0.049
TPSE337*006#0050 E 330 6.3 20.8 8 50 1.817 1.635 0.727 0.091 0.082 0.036
TPSE337*006#0100 E 330 6.3 20.8 8 100 1.285 1.156 0.514 0.128 0.116 0.051
TPSE337*006#0125 E 330 6.3 20.8 8 125 1.149 1.034 0.460 0.144 0.129 0.057
TPSE337*006#0150 E 330 6.3 20.8 8 150 1.049 0.944 0.420 0.157 0.142 0.063
TPSV337*006#0100 V 330 6.3 20.8 8 100 1.581 1.423 0.632 0.158 0.142 0.063
TPSY337*006#0150 Y 330 6.3 20.8 12 150 0.913 0.822 0.365 0.137 0.123 0.055
TPSD477*006#0045 D 470 6.3 29.6 12 45 1.826 1.643 0.730 0.082 0.074 0.033
TPSD477*006#0060 D 470 6.3 29.6 12 60 1.581 1.423 0.632 0.095 0.085 0.038
TPSD477*006#0100 D 470 6.3 29.6 12 100 1.225 1.102 0.490 0.122 0.110 0.049
TPSD477*006#0200 D 470 6.3 29.6 12 200 0.866 0.779 0.346 0.173 0.156 0.069
TPSE477*006#0045 E 470 6.3 29.6 10 45 1.915 1.723 0.766 0.086 0.078 0.034
TPSE477*006#0050 E 470 6.3 29.6 10 50 1.817 1.635 0.727 0.091 0.082 0.036
TPSE477*006#0060 E 470 6.3 29.6 10 60 1.658 1.492 0.663 0.099 0.090 0.040
TPSE477*006#0100 E 470 6.3 29.6 10 100 1.285 1.156 0.514 0.128 0.116 0.051
TPSE477*006#0200 E 470 6.3 29.6 10 200 0.908 0.817 0.363 0.182 0.163 0.073
TPSV477*006#0040 V 470 6.3 29.6 10 40 2.500 2.250 1.000 0.100 0.090 0.040
TPSV477*006#0055 V 470 6.3 29.6 10 55 2.132 1.919 0.853 0.117 0.106 0.047
TPSV477*006#0100 V 470 6.3 29.6 10 100 1.581 1.423 0.632 0.158 0.142 0.063
25
TPS Series
Low ESR
RATINGS & PART NUMBER REFERENCE
All technical data relates to an ambient temperature of +25°C.
Capacitance and DF are measured at 120Hz, 0.5V RMS with a maximum
DC bias of 2.2 volts. DCL is measured at rated voltage after 5 minutes.
* Insert K for ±10% and M for ±20% Capacitance Tolerance
# Standard Plating – Insert R for 7" reel and S for 13" reel
# Gold Plating – Insert A for 7" reel and B for 13" reel
Rated DCL DF ESR
100kHz Ripple Current Ratings (A) 100kHz Ripple Voltage Ratings (V)
AVX Case Capacitance Voltage (µA) % Max. (mΩ)
Part No. Size (µF) (V) Max. Max. @100kHz 25ºC 85ºC 125ºC 25ºC 85ºC 125ºC
TPSE687*006#0045 E 680 6.3 42.8 10 45 1.915 1.723 0.766 0.086 0.078 0.034
TPSE687*006#0060 E 680 6.3 42.8 10 60 1.658 1.492 0.663 0.099 0.090 0.040
TPSE687*006#0100 E 680 6.3 42.8 10 100 1.285 1.156 0.514 0.128 0.116 0.051
TPSV687*006#0035 V 680 6.3 42.8 14 35 2.673 2.405 1.069 0.094 0.084 0.037
TPSV687*006#0040 V 680 6.3 42.8 10 40 2.500 2.250 1.000 0.100 0.090 0.040
TPSV687*006#0050 V 680 6.3 42.8 10 50 2.236 2.012 0.894 0.112 0.101 0.045
TPSV108*006#0040 V 1000 6.3 60 16 40 2.500 2.250 1.000 0.100 0.090 0.040
TPSV108M006#0050 V 1000 6.3 60 16 50 2.236 2.012 0.894 0.112 0.101 0.045
TPSR105*010#9000 R 1 10 0.5 4 9000 0.078 0.070 0.031 0.704 0.633 0.281
TPSA225*010#1800 A 2.2 10 0.5 6 1800 0.204 0.184 0.082 0.367 0.331 0.147
TPST335*010#1500 T 3.3 10 0.5 6 1500 0.231 0.208 0.092 0.346 0.312 0.139
TPSA475*010#1400 A 4.7 10 0.5 6 1400 0.231 0.208 0.093 0.324 0.292 0.130
TPSR475*010#3000 R 4.7 10 0.5 6 3000 0.135 0.122 0.054 0.406 0.366 0.162
TPSR475*010#5000 R 4.7 10 0.5 6 5000 0.105 0.094 0.042 0.524 0.472 0.210
TPSA685*010#1800 A 6.8 10 0.7 6 1800 0.204 0.184 0.082 0.367 0.331 0.147
TPST685*010#1800 T 6.8 10 0.7 6 1800 0.211 0.190 0.084 0.379 0.342 0.152
TPSA106*010#0900 A 10 10 1 6 900 0.289 0.260 0.115 0.260 0.234 0.104
TPSA106*010#1800 A 10 10 1 6 1800 0.204 0.184 0.082 0.367 0.331 0.147
TPSP106M010#2000 P 10 10 1 8 2000 0.173 0.156 0.069 0.346 0.312 0.139
TPST106*010#1000 T 10 10 1 6 1000 0.283 0.255 0.113 0.283 0.255 0.113
TPST106*010#2000 T 10 10 1 6 2000 0.200 0.180 0.080 0.400 0.360 0.160
TPSA156*010#1000 A 15 10 1.5 6 1000 0.274 0.246 0.110 0.274 0.246 0.110
TPSB156*010#0450 B 15 10 1.5 6 450 0.435 0.391 0.174 0.196 0.176 0.078
TPSB156*010#0600 B 15 10 1.5 6 600 0.376 0.339 0.151 0.226 0.203 0.090
TPSB226*010#0400 B 22 10 2.2 6 400 0.461 0.415 0.184 0.184 0.166 0.074
TPSB226*010#0500 B 22 10 2.2 6 500 0.412 0.371 0.165 0.206 0.186 0.082
TPSB226*010#0700 B 22 10 2.2 6 700 0.348 0.314 0.139 0.244 0.220 0.098
TPSC226*010#0300 C 22 10 2.2 6 300 0.606 0.545 0.242 0.182 0.163 0.073
TPST226*010#0800 T 22 10 2.2 8 800 0.316 0.285 0.126 0.253 0.228 0.101
TPSB336*010#0250 B 33 10 3.3 6 250 0.583 0.525 0.233 0.146 0.131 0.058
TPSB336*010#0425 B 33 10 3.3 6 425 0.447 0.402 0.179 0.190 0.171 0.076
TPSB336*010#0500 B 33 10 3.3 6 500 0.412 0.371 0.165 0.206 0.186 0.082
TPSB336*010#0650 B 33 10 3.3 6 650 0.362 0.325 0.145 0.235 0.212 0.094
TPSC336*010#0150 C 33 10 3.3 6 150 0.856 0.771 0.343 0.128 0.116 0.051
TPSC336*010#0375 C 33 10 3.3 6 375 0.542 0.487 0.217 0.203 0.183 0.081
TPSC336*010#0500 C 33 10 3.3 6 500 0.469 0.422 0.188 0.235 0.211 0.094
TPSW336*010#0350 W 33 10 3.3 6 350 0.507 0.456 0.203 0.177 0.160 0.071
TPSB476*010#0250 B 47 10 4.7 8 250 0.583 0.525 0.233 0.146 0.131 0.058
TPSB476*010#0350 B 47 10 4.7 8 350 0.493 0.444 0.197 0.172 0.155 0.069
TPSB476*010#0500 B 47 10 4.7 8 500 0.412 0.371 0.165 0.206 0.186 0.082
TPSB476*010#0650 B 47 10 4.7 8 650 0.362 0.325 0.145 0.235 0.212 0.094
TPSC476*010#0200 C 47 10 4.7 6 200 0.742 0.667 0.297 0.148 0.133 0.059
TPSC476*010#0350 C 47 10 4.7 6 350 0.561 0.505 0.224 0.196 0.177 0.078
TPSD476*010#0100 D 47 10 4.7 6 100 1.225 1.102 0.490 0.122 0.110 0.049
TPSW476*010#0125 W 47 10 4.7 6 125 0.849 0.764 0.339 0.106 0.095 0.042
TPSW476*010#0150 W 47 10 4.7 6 150 0.775 0.697 0.310 0.116 0.105 0.046
TPSW476*010#0250 W 47 10 4.7 6 250 0.600 0.540 0.240 0.150 0.135 0.060
TPSB686*010#0600 B 68 10 6.8 8 600 0.376 0.339 0.151 0.226 0.203 0.090
TPSC686*010#0080 C 68 10 6.8 6 80 1.173 1.055 0.469 0.094 0.084 0.038
TPSC686*010#0100 C 68 10 6.8 6 100 1.049 0.944 0.420 0.105 0.094 0.042
TPSC686*010#0200 C 68 10 6.8 6 200 0.742 0.667 0.297 0.148 0.133 0.059
TPSC686*010#0300 C 68 10 6.8 6 300 0.606 0.545 0.242 0.182 0.163 0.073
TPSD686*010#0100 D 68 10 6.8 6 100 1.225 1.102 0.490 0.122 0.110 0.049
TPSD686*010#0150 D 68 10 6.8 6 150 1.000 0.900 0.400 0.150 0.135 0.060
TPSY686*010#0100 Y 68 10 6.8 6 100 1.118 1.006 0.447 0.112 0.101 0.045
TPSY686*010#0200 Y 68 10 6.8 6 200 0.791 0.712 0.316 0.158 0.142 0.063
TPSW686*010#0100 W 68 10 6.8 6 100 0.949 0.854 0.379 0.095 0.085 0.038
TPSW686*010#0150 W 68 10 6.8 6 150 0.775 0.697 0.310 0.116 0.105 0.046
TPSB107M010#0400 B 100 10 10 8 400 0.461 0.415 0.184 0.184 0.166 0.074
TPSC107*010#0075 C 100 10 10 8 75 1.211 1.090 0.484 0.091 0.082 0.036
TPSC107*010#0100 C 100 10 10 8 100 1.049 0.944 0.420 0.105 0.094 0.042
TPSC107*010#0150 C 100 10 10 8 150 0.856 0.771 0.343 0.128 0.116 0.051
TPSC107*010#0200 C 100 10 10 8 200 0.742 0.667 0.297 0.148 0.133 0.059
TPSD107*010#0050 D 100 10 10 6 50 1.732 1.559 0.693 0.087 0.078 0.035
TPSD107*010#0065 D 100 10 10 6 65 1.519 1.367 0.608 0.099 0.089 0.039
TPSD107*010#0080 D 100 10 10 6 80 1.369 1.232 0.548 0.110 0.099 0.044
TPSD107*010#0100 D 100 10 10 6 100 1.225 1.102 0.490 0.122 0.110 0.049
TPSD107*010#0125 D 100 10 10 6 125 1.095 0.986 0.438 0.137 0.123 0.055
26
TPS Series
Low ESR
RATINGS & PART NUMBER REFERENCE
All technical data relates to an ambient temperature of +25°C.
Capacitance and DF are measured at 120Hz, 0.5V RMS with a maximum
DC bias of 2.2 volts. DCL is measured at rated voltage after 5 minutes.
* Insert K for ±10% and M for ±20% Capacitance Tolerance
# Standard Plating – Insert R for 7" reel and S for 13" reel
# Gold Plating – Insert A for 7" reel and B for 13" reel
Rated DCL DF ESR
100kHz Ripple Current Ratings (A) 100kHz Ripple Voltage Ratings (V)
AVX Case Capacitance Voltage (µA) % Max. (mΩ)
Part No. Size (µF) (V) Max. Max. @100kHz 25ºC 85ºC 125ºC 25ºC 85ºC 125ºC
TPSD107*010#0150 D 100 10 10 6 150 1.000 0.900 0.400 0.150 0.135 0.060
TPSE107*010#0125 E 100 10 10 6 125 1.149 1.034 0.460 0.144 0.129 0.057
TPSY107*010#0100 Y 100 10 10 6 100 1.118 1.006 0.447 0.112 0.101 0.045
TPSY107*010#0150 Y 100 10 10 6 150 0.913 0.822 0.365 0.137 0.123 0.055
TPSY107*010#0200 Y 100 10 10 6 200 0.791 0.712 0.316 0.158 0.142 0.063
TPSX107*010#0085 X 100 10 10 8 85 1.085 0.976 0.434 0.092 0.083 0.037
TPSX107*010#0150 X 100 10 10 8 150 0.816 0.735 0.327 0.122 0.110 0.049
TPSX107*010#0200 X 100 10 10 8 200 0.707 0.636 0.283 0.141 0.127 0.057
TPSW107*010#0150 W 100 10 10 6 150 0.775 0.697 0.310 0.116 0.105 0.046
TPSD157*010#0050 D 150 10 15 6 50 1.732 1.559 0.693 0.087 0.078 0.035
TPSD157*010#0085 D 150 10 15 8 85 1.328 1.196 0.531 0.113 0.102 0.045
TPSD157*010#0100 D 150 10 15 8 100 1.225 1.102 0.490 0.122 0.110 0.049
TPSE157*010#0100 E 150 10 15 8 100 1.285 1.156 0.514 0.128 0.116 0.051
TPSX157M010#0100 X 150 10 15 6 100 1.000 0.900 0.400 0.100 0.090 0.040
TPSY157*010#0100 Y 150 10 15 6 100 1.118 1.006 0.447 0.112 0.101 0.045
TPSY157*010#0150 Y 150 10 15 6 150 0.913 0.822 0.365 0.137 0.123 0.055
TPSY157*010#0200 Y 150 10 15 6 200 0.791 0.712 0.316 0.158 0.142 0.063
TPSD227*010#0050 D 220 10 22 8 50 1.732 1.559 0.693 0.087 0.078 0.035
TPSD227*010#0100 D 220 10 22 8 100 1.225 1.102 0.490 0.122 0.110 0.049
TPSD227*010#0150 D 220 10 22 8 150 1.000 0.900 0.400 0.150 0.135 0.060
TPSE227*010#0050 E 220 10 22 8 50 1.817 1.635 0.727 0.091 0.082 0.036
TPSE227*010#0060 E 220 10 22 8 60 1.658 1.492 0.663 0.099 0.090 0.040
TPSE227*010#0070 E 220 10 22 8 70 1.535 1.382 0.614 0.107 0.097 0.043
TPSE227*010#0100 E 220 10 22 8 100 1.285 1.156 0.514 0.128 0.116 0.051
TPSE227*010#0125 E 220 10 22 8 125 1.149 1.034 0.460 0.144 0.129 0.057
TPSE227*010#0150 E 220 10 22 8 150 1.049 0.944 0.420 0.157 0.142 0.063
TPSY227*010#0150 Y 220 10 22 10 150 0.913 0.822 0.365 0.137 0.123 0.055
TPSY227*010#0200 Y 220 10 22 10 200 0.791 0.712 0.316 0.158 0.142 0.063
TPSD337*010#0050 D 330 10 33 8 50 1.732 1.559 0.693 0.087 0.078 0.035
TPSD337*010#0065 D 330 10 33 8 65 1.519 1.367 0.608 0.099 0.089 0.039
TPSD337*010#0100 D 330 10 33 8 100 1.225 1.102 0.490 0.122 0.110 0.049
TPSD337*010#0150 D 330 10 33 8 150 1.000 0.900 0.400 0.150 0.135 0.060
TPSE337*010#0040 E 330 10 33 8 40 2.031 1.828 0.812 0.081 0.073 0.032
TPSE337*010#0050 E 330 10 33 8 50 1.817 1.635 0.727 0.091 0.082 0.036
TPSE337*010#0060 E 330 10 33 8 60 1.658 1.492 0.663 0.099 0.090 0.040
TPSE337*010#0100 E 330 10 33 8 100 1.285 1.156 0.514 0.128 0.116 0.051
TPSV337*010#0040 V 330 10 33 10 40 2.500 2.250 1.000 0.100 0.090 0.040
TPSV337*010#0060 V 330 10 33 10 60 2.041 1.837 0.816 0.122 0.110 0.049
TPSV337*010#0100 V 330 10 33 10 100 1.581 1.423 0.632 0.158 0.142 0.063
TPSE477*010#0045 E 470 10 47 10 45 1.915 1.723 0.766 0.086 0.078 0.034
TPSE477*010#0050 E 470 10 47 10 50 1.817 1.635 0.727 0.091 0.082 0.036
TPSE477*010#0060 E 470 10 47 10 60 1.658 1.492 0.663 0.099 0.090 0.040
TPSE477*010#0100 E 470 10 47 10 100 1.285 1.156 0.514 0.128 0.116 0.051
TPSE477*010#0200 E 470 10 47 10 200 0.908 0.817 0.363 0.182 0.163 0.073
TPSV477*010#0040 V 470 10 47 10 40 2.500 2.250 1.000 0.100 0.090 0.040
TPSV477*010#0060 V 470 10 47 10 60 2.041 1.837 0.816 0.122 0.110 0.049
TPSV477*010#0100 V 470 10 47 10 100 1.581 1.423 0.632 0.158 0.142 0.063
TPSA225*016#1800 A 2.2 16 0.5 6 1800 0.204 0.184 0.082 0.367 0.331 0.147
TPSA225*016#3500 A 2.2 16 0.5 6 3500 0.146 0.132 0.059 0.512 0.461 0.205
TPST225*016#2000 T 2.2 16 0.5 6 2000 0.200 0.180 0.080 0.400 0.360 0.160
TPSA335*016#3500 A 3.3 16 0.5 6 3500 0.146 0.132 0.059 0.512 0.461 0.205
TPSA475*016#2000 A 4.7 16 0.8 6 2000 0.194 0.174 0.077 0.387 0.349 0.155
TPSB475*016#0800 B 4.7 16 0.8 6 800 0.326 0.293 0.130 0.261 0.235 0.104
TPSB475*016#1500 B 4.7 16 0.8 6 1500 0.238 0.214 0.095 0.357 0.321 0.143
TPSA685*016#1500 A 6.8 16 1.1 6 1500 0.224 0.201 0.089 0.335 0.302 0.134
TPSB685*016#0600 B 6.8 16 1.1 6 600 0.376 0.339 0.151 0.226 0.203 0.090
TPSB685*016#1200 B 6.8 16 1.1 6 1200 0.266 0.240 0.106 0.319 0.287 0.128
TPSB106*016#0500 B 10 16 1.6 6 500 0.412 0.371 0.165 0.206 0.186 0.082
TPSB106*016#0800 B 10 16 1.6 6 800 0.326 0.293 0.130 0.261 0.235 0.104
TPSC106*016#0500 C 10 16 1.6 6 500 0.469 0.422 0.188 0.235 0.211 0.094
TPST106*016#0800 T 10 16 1.6 8 800 0.316 0.285 0.126 0.253 0.228 0.101
TPST106*016#1000 T 10 16 1.6 8 1000 0.283 0.255 0.113 0.283 0.255 0.113
TPSW106*016#0500 W 10 16 1.6 6 500 0.424 0.382 0.170 0.212 0.191 0.085
TPSW106*016#0600 W 10 16 1.6 6 600 0.387 0.349 0.155 0.232 0.209 0.093
TPSB156*016#0500 B 15 16 2.4 6 500 0.412 0.371 0.165 0.206 0.186 0.082
TPSB156*016#0800 B 15 16 2.4 6 800 0.326 0.293 0.130 0.261 0.235 0.104
TPSB226*016#0400 B 22 16 3.5 6 400 0.461 0.415 0.184 0.184 0.166 0.074
TPSB226*016#0600 B 22 16 3.5 6 600 0.376 0.339 0.151 0.226 0.203 0.090
27
TPS Series
Low ESR
RATINGS & PART NUMBER REFERENCE
All technical data relates to an ambient temperature of +25°C.
Capacitance and DF are measured at 120Hz, 0.5V RMS with a maximum
DC bias of 2.2 volts. DCL is measured at rated voltage after 5 minutes.
* Insert K for ±10% and M for ±20% Capacitance Tolerance
# Standard Plating – Insert R for 7" reel and S for 13" reel
# Gold Plating – Insert A for 7" reel and B for 13" reel
Rated DCL DF ESR
100kHz Ripple Current Ratings (A) 100kHz Ripple Voltage Ratings (V)
AVX Case Capacitance Voltage (µA) % Max. (mΩ)
Part No. Size (µF) (V) Max. Max. @100kHz 25ºC 85ºC 125ºC 25ºC 85ºC 125ºC
TPSC226*016#0150 C 22 16 3.5 6 150 0.856 0.771 0.343 0.128 0.116 0.051
TPSC226*016#0250 C 22 16 3.5 6 250 0.663 0.597 0.265 0.166 0.149 0.066
TPSC226*016#0300 C 22 16 3.5 6 300 0.606 0.545 0.242 0.182 0.163 0.073
TPSC226*016#0375 C 22 16 3.5 6 375 0.542 0.487 0.217 0.203 0.183 0.081
TPSW226*016#0500 W 22 16 3.5 6 500 0.424 0.382 0.170 0.212 0.191 0.085
TPSB336*016#0350 B 33 16 5.3 8 350 0.493 0.444 0.197 0.172 0.155 0.069
TPSB336*016#0500 B 33 16 5.3 8 500 0.412 0.371 0.165 0.206 0.186 0.082
TPSC336*016#0100 C 33 16 5.3 6 100 1.049 0.944 0.420 0.105 0.094 0.042
TPSC336*016#0150 C 33 16 5.3 6 150 0.856 0.771 0.343 0.128 0.116 0.051
TPSC336*016#0225 C 33 16 5.3 6 225 0.699 0.629 0.280 0.157 0.142 0.063
TPSC336*016#0300 C 33 16 5.3 6 300 0.606 0.545 0.242 0.182 0.163 0.073
TPSD336*016#0200 D 33 16 5.3 6 200 0.866 0.779 0.346 0.173 0.156 0.069
TPSW336*016#0140 W 33 16 5.3 6 140 0.802 0.722 0.321 0.112 0.101 0.045
TPSW336*016#0175 W 33 16 5.3 6 175 0.717 0.645 0.287 0.125 0.113 0.050
TPSW336*016#0250 W 33 16 5.3 6 250 0.600 0.540 0.240 0.150 0.135 0.060
TPSW336*016#0400 W 33 16 5.3 6 400 0.474 0.427 0.190 0.190 0.171 0.076
TPSW336*016#0500 W 33 16 5.3 6 500 0.424 0.382 0.170 0.212 0.191 0.085
TPSY336*016#0300 Y 33 16 5.3 6 300 0.645 0.581 0.258 0.194 0.174 0.077
TPSY336*016#0400 Y 33 16 5.3 6 400 0.559 0.503 0.224 0.224 0.201 0.089
TPSC476*016#0110 C 47 16 7.5 6 110 1.000 0.900 0.400 0.110 0.099 0.044
TPSC476*016#0350 C 47 16 7.5 6 350 0.561 0.505 0.224 0.196 0.177 0.078
TPSD476*016#0080 D 47 16 7.5 6 80 1.369 1.232 0.548 0.110 0.099 0.044
TPSD476*016#0100 D 47 16 7.5 6 100 1.225 1.102 0.490 0.122 0.110 0.049
TPSD476*016#0150 D 47 16 7.5 6 150 1.000 0.900 0.400 0.150 0.135 0.060
TPSD476*016#0200 D 47 16 7.5 6 200 0.866 0.779 0.346 0.173 0.156 0.069
TPSW476*016#0200 W 47 16 7.5 6 200 0.671 0.604 0.268 0.134 0.121 0.054
TPSY476*016#0250 Y 47 16 7.5 6 250 0.707 0.636 0.283 0.176 0.159 0.071
TPSX476*016#0180 X 47 16 7.5 6 180 0.745 0.671 0.298 0.134 0.121 0.054
TPSC686*016#0125 C 68 16 10.9 6 125 0.938 0.844 0.375 0.117 0.106 0.047
TPSC686*016#0200 C 68 16 10.9 6 200 0.742 0.667 0.297 0.148 0.133 0.059
TPSD686*016#0070 D 68 16 10.8 6 70 1.464 1.317 0.586 0.102 0.092 0.041
TPSD686*016#0100 D 68 16 10.9 6 100 1.225 1.102 0.490 0.122 0.110 0.049
TPSD686*016#0150 D 68 16 10.9 6 150 1.000 0.900 0.400 0.150 0.135 0.060
TPSY686*016#0200 Y 68 16 10.9 6 200 0.791 0.712 0.316 0.158 0.142 0.063
TPSY686*016#0250 Y 68 16 10.9 6 250 0.707 0.636 0.283 0.177 0.159 0.071
TPSX686*016#0150 X 68 16 10.9 8 150 0.816 0.735 0.327 0.122 0.110 0.049
TPSD107*016#0060 D 100 16 16 6 60 1.581 1.423 0.632 0.095 0.085 0.038
TPSD107*016#0100 D 100 16 16 6 100 1.225 1.102 0.490 0.122 0.110 0.049
TPSD107*016#0125 D 100 16 16 6 125 1.095 0.986 0.438 0.137 0.123 0.055
TPSD107*016#0150 D 100 16 16 6 150 1.000 0.900 0.400 0.150 0.135 0.060
TPSE107*016#0055 E 100 16 16 6 55 1.732 1.559 0.693 0.095 0.086 0.038
TPSE107*016#0100 E 100 16 16 6 100 1.285 1.156 0.514 0.128 0.116 0.051
TPSE107*016#0125 E 100 16 16 6 125 1.149 1.034 0.460 0.144 0.129 0.057
TPSE107*016#0150 E 100 16 16 6 150 1.049 0.944 0.420 0.157 0.142 0.063
TPSY107*016#0100 Y 100 16 24 6 100 1.118 1.006 0.447 0.112 0.101 0.045
TPSY107*016#0150 Y 100 16 16 8 150 0.913 0.822 0.365 0.137 0.123 0.055
TPSY107*016#0200 Y 100 16 16 8 200 0.791 0.712 0.316 0.158 0.142 0.063
TPSD157*016#0060 D 150 16 24 6 60 1.581 1.423 0.632 0.095 0.085 0.038
TPSD157*016#0085 D 150 16 24 6 85 1.328 1.196 0.531 0.113 0.102 0.045
TPSD157*016#0100 D 150 16 24 6 100 1.225 1.102 0.490 0.122 0.110 0.049
TPSD157*016#0125 D 150 16 24 6 125 1.095 0.986 0.438 0.137 0.123 0.055
TPSD157*016#0150 D 150 16 24 6 150 1.000 0.900 0.400 0.150 0.135 0.060
TPSE157*016#0100 E 150 16 24 6 100 1.285 1.156 0.514 0.128 0.116 0.051
TPSV157*016#0045 V 150 16 24 8 45 2.357 2.121 0.943 0.106 0.095 0.042
TPSV157*016#0075 V 150 16 24 8 75 1.826 1.643 0.730 0.137 0.123 0.055
TPSE227*016#0100 E 220 16 35.2 10 100 1.285 1.156 0.514 0.128 0.116 0.051
TPSE227*016#0150 E 220 16 35.2 10 150 1.049 0.944 0.420 0.157 0.142 0.063
TPSV227*016#0050 V 220 16 35.2 8 50 2.236 2.012 0.894 0.112 0.101 0.045
TPSV227*016#0075 V 220 16 35.2 8 75 1.826 1.643 0.730 0.137 0.123 0.055
TPSV227*016#0100 V 220 16 35.2 8 100 1.581 1.423 0.632 0.158 0.142 0.063
TPSV227*016#0150 V 220 16 35.2 8 150 1.291 1.162 0.516 0.194 0.174 0.077
TPSA105*020#3000 A 1 20 0.5 4 3000 0.158 0.142 0.063 0.474 0.427 0.190
TPSS105*020#6000 S 1 20 0.5 4 6000 0.104 0.094 0.042 0.624 0.562 0.250
TPSR105*020#6000 R 1 20 0.5 4 6000 0.096 0.086 0.038 0.574 0.517 0.230
TPST105*020#2000 T 1 20 0.5 4 2000 0.200 0.180 0.080 0.400 0.360 0.160
TPSA225*020#3000 A 2.2 20 0.5 6 3000 0.158 0.142 0.063 0.474 0.427 0.190
TPSA335*020#2500 A 3.3 20 0.7 6 2500 0.173 0.156 0.069 0.433 0.390 0.173
TPSB335*020#1300 B 3.3 20 0.7 6 1300 0.256 0.230 0.102 0.332 0.299 0.133
28
TPS Series
Low ESR
RATINGS & PART NUMBER REFERENCE
All technical data relates to an ambient temperature of +25°C.
Capacitance and DF are measured at 120Hz, 0.5V RMS with a maximum
DC bias of 2.2 volts. DCL is measured at rated voltage after 5 minutes.
* Insert K for ±10% and M for ±20% Capacitance Tolerance
# Standard Plating – Insert R for 7" reel and S for 13" reel
# Gold Plating – Insert A for 7" reel and B for 13" reel
Rated DCL DF ESR
100kHz Ripple Current Ratings (A) 100kHz Ripple Voltage Ratings (V)
AVX Case Capacitance Voltage (µA) % Max. (mΩ)
Part No. Size (µF) (V) Max. Max. @100kHz 25ºC 85ºC 125ºC 25ºC 85ºC 125ºC
TPSA475*020#1800 A 4.7 20 0.9 6 1800 0.204 0.184 0.082 0.367 0.331 0.147
TPSB475*020#0750 B 4.7 20 0.9 6 750 0.337 0.303 0.135 0.252 0.227 0.101
TPSB475*020#1000 B 4.7 20 0.9 6 1000 0.292 0.262 0.117 0.292 0.262 0.117
TPSA685*020#1000 A 6.8 20 1.4 6 1000 0.274 0.246 0.110 0.274 0.246 0.110
TPSB685*020#0600 B 6.8 20 1.4 6 600 0.376 0.339 0.151 0.226 0.203 0.090
TPSB685*020#1000 B 6.8 20 1.4 6 1000 0.292 0.262 0.117 0.292 0.262 0.117
TPSC685*020#0700 C 6.8 20 1.4 6 700 0.396 0.357 0.159 0.277 0.250 0.111
TPSB106*020#0500 B 10 20 2 6 500 0.412 0.371 0.165 0.206 0.186 0.082
TPSB106*020#1000 B 10 20 2 6 1000 0.292 0.262 0.117 0.292 0.262 0.117
TPSC106*020#0500 C 10 20 2 6 500 0.469 0.422 0.188 0.235 0.211 0.094
TPSC106*020#0700 C 10 20 2 6 700 0.396 0.357 0.159 0.277 0.250 0.111
TPSB156*020#0500 B 15 20 3 6 500 0.412 0.371 0.165 0.206 0.186 0.082
TPSC156*020#0400 C 15 20 3 6 400 0.524 0.472 0.210 0.210 0.189 0.084
TPSC156*020#0450 C 15 20 3 6 450 0.494 0.445 0.198 0.222 0.200 0.089
TPSB226*020#0400 B 22 20 4.4 6 400 0.461 0.415 0.184 0.184 0.166 0.074
TPSB226*020#0600 B 22 20 4.4 6 600 0.376 0.339 0.151 0.226 0.203 0.090
TPSC226*020#0100 C 22 20 4.4 6 100 1.049 0.944 0.420 0.105 0.094 0.042
TPSC226*020#0150 C 22 20 4.4 6 150 0.856 0.771 0.343 0.128 0.116 0.051
TPSC226*020#0400 C 22 20 4.4 6 400 0.524 0.472 0.210 0.210 0.189 0.084
TPSD226*020#0200 D 22 20 4.4 6 200 0.866 0.779 0.346 0.173 0.156 0.069
TPSD226*020#0300 D 22 20 4.4 6 300 0.707 0.636 0.283 0.212 0.191 0.085
TPSC336*020#0300 C 33 20 6.6 6 300 0.606 0.545 0.242 0.182 0.163 0.073
TPSD336*020#0100 D 33 20 6.6 6 100 1.225 1.102 0.490 0.122 0.110 0.049
TPSD336*020#0200 D 33 20 6.6 6 200 0.866 0.779 0.346 0.173 0.155 0.069
TPSD476*020#0075 D 47 20 9.4 6 75 1.414 1.273 0.566 0.106 0.095 0.042
TPSD476*020#0100 D 47 20 9.4 6 100 1.225 1.102 0.490 0.122 0.110 0.049
TPSD476*020#0200 D 47 20 9.4 6 200 0.866 0.779 0.346 0.173 0.156 0.069
TPSE476*020#0070 E 47 20 9.4 6 70 1.535 1.382 0.614 0.107 0.097 0.043
TPSE476*020#0125 E 47 20 9.4 6 125 1.149 1.034 0.460 0.144 0.129 0.057
TPSE476*020#0150 E 47 20 9.4 6 150 1.049 0.944 0.420 0.157 0.142 0.063
TPSE476*020#0200 E 47 20 9.4 6 200 0.908 0.817 0.363 0.182 0.163 0.073
TPSE476*020#0250 E 47 20 9.4 6 250 0.812 0.731 0.325 0.203 0.183 0.081
TPSD686*020#0070 D 68 20 13.6 6 70 1.464 1.317 0.586 0.102 0.092 0.041
TPSD686*020#0150 D 68 20 13.6 6 150 1.000 0.900 0.400 0.150 0.135 0.060
TPSD686*020#0200 D 68 20 13.6 6 200 0.866 0.779 0.346 0.173 0.156 0.069
TPSD686*020#0300 D 68 20 13.6 6 300 0.707 0.636 0.283 0.212 0.191 0.085
TPSE686*020#0125 E 68 20 13.6 6 125 1.149 1.034 0.460 0.144 0.129 0.057
TPSE686*020#0150 E 68 20 13.6 6 150 1.049 0.944 0.420 0.157 0.142 0.063
TPSE686*020#0200 E 68 20 13.6 6 200 0.908 0.817 0.363 0.182 0.163 0.073
TPSD107*020#0085 D 100 20 20 6 85 1.328 1.196 0.531 0.113 0.102 0.045
TPSD107*020#0100 D 100 20 20 6 100 1.225 1.102 0.490 0.122 0.110 0.049
TPSD107*020#0150 D 100 20 20 6 150 1.000 0.900 0.400 0.150 0.135 0.060
TPSE107*020#0100 E 100 20 20 6 100 1.285 1.156 0.514 0.128 0.116 0.051
TPSE107*020#0150 E 100 20 20 6 150 1.049 0.944 0.420 0.157 0.142 0.063
TPSE107*020#0200 E 100 20 20 6 200 0.908 0.817 0.363 0.182 0.163 0.073
TPSV107*020#0060 V 100 20 20 8 60 2.041 1.837 0.816 0.122 0.110 0.049
TPSV107*020#0085 V 100 20 20 8 85 1.715 1.543 0.686 0.146 0.131 0.058
TPSV107*020#0100 V 100 20 20 8 100 1.581 1.423 0.632 0.158 0.142 0.063
TPSV107*020#0200 V 100 20 20 8 200 1.118 1.006 0.447 0.224 0.201 0.089
TPSV157*020#0080 V 150 20 30 8 80 1.768 1.591 0.707 0.141 0.127 0.057
TPSA474*025#7000 A 0.47 25 0.5 4 7000 0.104 0.093 0.041 0.725 0.652 0.290
TPSA684*025#6000 A 0.68 25 0.5 4 6000 0.112 0.101 0.045 0.671 0.604 0.268
TPSA155*025#3000 A 1.5 25 0.5 6 3000 0.158 0.142 0.063 0.474 0.427 0.190
TPSB155*025#1800 B 1.5 25 0.5 6 1800 0.217 0.196 0.087 0.391 0.352 0.156
TPSB225*025#0900 B 2.2 25 0.6 6 900 0.307 0.277 0.123 0.277 0.249 0.111
TPSB225*025#1200 B 2.2 25 0.6 6 1200 0.266 0.240 0.106 0.319 0.287 0.128
TPSB225*025#2500 B 2.2 25 0.6 6 2500 0.184 0.166 0.074 0.461 0.415 0.184
TPSA335*025#1000 A 3.3 25 0.8 6 1000 0.274 0.246 0.110 0.274 0.246 0.110
TPSA335*025#1500 A 3.3 25 0.8 6 1500 0.224 0.201 0.089 0.335 0.302 0.134
TPSB335*025#0750 B 3.3 25 0.8 6 750 0.337 0.303 0.135 0.252 0.227 0.101
TPSB335*025#1500 B 3.3 25 0.8 6 1500 0.238 0.214 0.095 0.357 0.321 0.143
TPSB335*025#2000 B 3.3 25 0.8 6 2000 0.206 0.186 0.082 0.412 0.371 0.165
TPSB475*025#0700 B 4.7 25 1.2 6 700 0.348 0.314 0.139 0.244 0.220 0.098
TPSB475*025#0900 B 4.7 25 1.2 6 900 0.307 0.277 0.123 0.277 0.249 0.111
TPSB475*025#1500 B 4.7 25 1.2 6 1500 0.238 0.214 0.095 0.357 0.321 0.143
TPSB685*025#0700 B 6.8 25 1.7 6 700 0.348 0.314 0.139 0.244 0.220 0.098
TPSC685*025#0500 C 6.8 25 1.7 6 500 0.469 0.422 0.188 0.235 0.211 0.094
TPSC685*025#0600 C 6.8 25 1.7 6 600 0.428 0.385 0.171 0.257 0.231 0.103
29
TPS Series
Low ESR
RATINGS & PART NUMBER REFERENCE
All technical data relates to an ambient temperature of +25°C.
Capacitance and DF are measured at 120Hz, 0.5V RMS with a maximum
DC bias of 2.2 volts. DCL is measured at rated voltage after 5 minutes.
* Insert K for ±10% and M for ±20% Capacitance Tolerance
# Standard Plating – Insert R for 7" reel and S for 13" reel
# Gold Plating – Insert A for 7" reel and B for 13" reel
Rated DCL DF ESR
100kHz Ripple Current Ratings (A) 100kHz Ripple Voltage Ratings (V)
AVX Case Capacitance Voltage (µA) % Max. (mΩ)
Part No. Size (µF) (V) Max. Max. @100kHz 25ºC 85ºC 125ºC 25ºC 85ºC 125ºC
TPSC685*025#0700 C 6.8 25 1.7 6 700 0.396 0.357 0.159 0.277 0.250 0.111
TPSC106*025#0300 C 10 25 2.5 6 300 0.606 0.545 0.242 0.182 0.163 0.073
TPSC106*025#0500 C 10 25 2.5 6 500 0.469 0.422 0.188 0.235 0.211 0.094
TPSC156*025#0220 C 15 25 3.8 6 220 0.707 0.636 0.283 0.156 0.140 0.062
TPSC156*025#0300 C 15 25 3.8 6 300 0.606 0.545 0.242 0.182 0.163 0.073
TPSD156*025#0100 D 15 25 3.8 6 100 1.225 1.102 0.490 0.122 0.110 0.049
TPSD156*025#0300 D 15 25 3.8 6 300 0.707 0.636 0.283 0.212 0.191 0.085
TPSC226*025#0275 C 22 25 5.5 6 275 0.632 0.569 0.253 0.174 0.157 0.070
TPSC226*025#0400 C 22 25 5.5 6 400 0.524 0.472 0.210 0.210 0.189 0.084
TPSD226*025#0100 D 22 25 5.5 6 100 1.225 1.102 0.490 0.122 0.110 0.049
TPSD226*025#0200 D 22 25 5.5 6 200 0.866 0.779 0.346 0.173 0.156 0.069
TPSD226*025#0300 D 22 25 5.5 6 300 0.707 0.636 0.283 0.212 0.191 0.085
TPSD336*025#0100 D 33 25 8.3 6 100 1.225 1.102 0.490 0.122 0.110 0.049
TPSD336*025#0200 D 33 25 8.3 6 200 0.866 0.779 0.346 0.173 0.156 0.069
TPSD336*025#0300 D 33 25 8.3 6 300 0.707 0.636 0.283 0.212 0.191 0.085
TPSE336*025#0100 E 33 25 8.3 6 100 1.285 1.156 0.514 0.128 0.116 0.051
TPSE336*025#0175 E 33 25 8.3 6 175 0.971 0.874 0.388 0.170 0.153 0.068
TPSE336*025#0200 E 33 25 8.3 6 200 0.908 0.817 0.363 0.182 0.163 0.073
TPSE336*025#0300 E 33 25 8.3 6 300 0.742 0.667 0.297 0.222 0.200 0.089
TPSD476*025#0125 D 47 25 11.8 6 125 1.095 0.986 0.438 0.137 0.123 0.055
TPSD476*025#0150 D 47 25 11.8 6 150 1.000 0.900 0.400 0.150 0.135 0.060
TPSD476*025#0250 D 47 25 11.8 6 250 0.775 0.697 0.310 0.194 0.174 0.077
TPSE476*025#0080 E 47 25 8.3 6 80 1.436 1.293 0.574 0.115 0.103 0.046
TPSE476*025#0100 E 47 25 8.3 6 100 1.285 1.156 0.514 0.128 0.116 0.051
TPSE476*025#0125 E 47 25 8.3 6 125 1.149 1.034 0.460 0.144 0.129 0.057
TPSE686*025#0125 E 68 25 17 6 125 1.149 1.034 0.460 0.144 0.129 0.057
TPSE686*025#0200 E 68 25 17 6 200 0.908 0.817 0.363 0.182 0.163 0.073
TPSV686*025#0080 V 68 25 17 6 80 1.768 1.591 0.707 0.141 0.127 0.057
TPSV686*025#0095 V 68 25 17 6 95 1.622 1.460 0.649 0.154 0.139 0.062
TPSV686*025#0150 V 68 25 17 6 150 1.291 1.162 0.516 0.194 0.174 0.077
TPSV686*025#0200 V 68 25 17 6 200 1.118 1.006 0.447 0.224 0.201 0.089
TPSV107*025#0100 V 100 25 25 8 100 1.581 1.423 0.632 0.158 0.142 0.063
TPSA224*035#6000 A 0.22 35 0.5 4 6000 0.112 0.101 0.045 0.671 0.604 0.268
TPSA334*035#6000 A 0.33 35 0.5 4 6000 0.112 0.101 0.045 0.671 0.604 0.268
TPSA474*035#6000 A 0.47 35 0.5 4 6000 0.112 0.101 0.045 0.671 0.604 0.268
TPSB474*035#4000 B 0.47 35 0.5 4 4000 0.146 0.131 0.058 0.583 0.525 0.233
TPSA684*035#6000 A 0.68 35 0.5 4 6000 0.112 0.101 0.045 0.671 0.604 0.268
TPSA105*035#3000 A 1 35 0.5 4 3000 0.158 0.142 0.063 0.474 0.427 0.190
TPSB105*035#2000 B 1 35 0.5 4 2000 0.206 0.186 0.082 0.412 0.371 0.165
TPSB155*035#2500 B 1.5 35 0.5 6 2500 0.184 0.166 0.074 0.461 0.415 0.184
TPSA225*035#1500 A 2.2 35 0.8 6 1500 0.224 0.201 0.089 0.335 0.302 0.134
TPSB225*035#0750 B 2.2 35 0.8 6 750 0.337 0.303 0.135 0.252 0.227 0.101
TPSB225*035#1500 B 2.2 35 0.8 6 1500 0.238 0.214 0.095 0.357 0.321 0.143
TPSB225*035#2000 B 2.2 35 0.8 6 2000 0.206 0.186 0.082 0.412 0.371 0.165
TPSC225*035#1000 C 2.2 35 0.8 6 1000 0.332 0.298 0.133 0.332 0.298 0.133
TPSB335*035#1000 B 3.3 35 1.2 6 1000 0.292 0.262 0.117 0.292 0.262 0.117
TPSC335*035#0700 C 3.3 35 1.2 6 700 0.396 0.357 0.159 0.277 0.250 0.111
TPSB475*035#0700 B 4.7 35 1.2 6 700 0.348 0.314 0.139 0.244 0.220 0.098
TPSB475*035#1500 B 4.7 35 1.2 6 1500 0.238 0.214 0.095 0.357 0.321 0.143
TPSC475*035#0600 C 4.7 35 1.6 6 600 0.428 0.385 0.171 0.257 0.231 0.103
TPSC685*035#0350 C 6.8 35 2.4 6 350 0.561 0.505 0.224 0.196 0.177 0.078
TPSD685*035#0150 D 6.8 35 2.4 6 150 1.000 0.900 0.400 0.150 0.135 0.060
TPSD685*035#0400 D 6.8 35 2.4 6 400 0.612 0.551 0.245 0.245 0.220 0.098
TPSD685*035#0500 D 6.8 35 2.4 6 500 0.548 0.493 0.219 0.274 0.246 0.110
TPSD106*035#0125 D 10 35 3.5 6 125 1.095 0.986 0.438 0.137 0.123 0.055
TPSD106*035#0300 D 10 35 3.5 6 300 0.707 0.636 0.283 0.212 0.191 0.085
TPSE106*035#0200 E 10 35 3.5 6 200 0.908 0.817 0.363 0.182 0.163 0.073
TPSC156*035#0350 C 15 35 5.3 6 350 0.561 0.505 0.224 0.196 0.177 0.078
TPSC156*035#0450 C 15 35 5.3 6 450 0.494 0.445 0.198 0.222 0.200 0.089
TPSD156*035#0100 D 15 35 5.3 6 100 1.225 1.102 0.490 0.122 0.110 0.049
TPSD156*035#0300 D 15 35 5.3 6 300 0.707 0.636 0.283 0.212 0.191 0.085
TPSY156*035#0250 Y 15 35 5.3 6 250 0.707 0.636 0.283 0.177 0.159 0.071
TPSD226*035#0125 D 22 35 7.7 6 125 1.095 0.986 0.438 0.137 0.123 0.055
TPSD226*035#0200 D 22 35 7.7 6 200 0.866 0.779 0.346 0.173 0.156 0.069
TPSD226*035#0300 D 22 35 7.7 6 300 0.707 0.636 0.283 0.212 0.191 0.085
TPSD226*035#0400 D 22 35 7.7 6 400 0.612 0.551 0.245 0.245 0.220 0.098
TPSE226*035#0125 E 22 35 7.7 6 125 1.149 1.034 0.460 0.144 0.129 0.057
TPSE226*035#0200 E 22 35 7.7 6 200 0.908 0.817 0.363 0.182 0.163 0.073
30
TPS Series
Low ESR
RATINGS & PART NUMBER REFERENCE
Rated DCL DF ESR
100kHz Ripple Current Ratings (A) 100kHz Ripple Voltage Ratings (V)
AVX Case Capacitance Voltage (µA) % Max. (mΩ)
Part No. Size (µF) (V) Max. Max. @100kHz 25ºC 85ºC 125ºC 25ºC 85ºC 125ºC
TPSE226*035#0300 E 22 35 7.7 6 300 0.742 0.667 0.297 0.222 0.200 0.089
TPSD336*035#0200 D 33 35 11.6 6 200 0.866 0.779 0.346 0.173 0.156 0.069
TPSD336*035#0300 D 33 35 11.6 6 300 0.707 0.636 0.283 0.212 0.191 0.085
TPSE336*035#0100 E 33 35 11.6 6 100 1.285 1.156 0.514 0.128 0.116 0.051
TPSE336*035#0250 E 33 35 11.6 6 250 0.812 0.731 0.325 0.203 0.183 0.081
TPSE336*035#0300 E 33 35 11.6 6 300 0.742 0.667 0.297 0.222 0.200 0.089
TPSV336*035#0200 V 33 35 11.6 6 200 1.118 1.006 0.447 0.224 0.201 0.089
TPSE476*035#0200 E 47 35 16.5 6 200 0.908 0.817 0.363 0.182 0.163 0.073
TPSE476*035#0250 E 47 35 16.5 6 250 0.812 0.731 0.325 0.203 0.183 0.081
TPSV476*035#0150 V 47 35 16.5 6 150 1.291 1.162 0.516 0.194 0.174 0.077
TPSV476*035#0200 V 47 35 16.5 6 200 1.118 1.006 0.447 0.224 0.201 0.089
TPSV686M035#0150 V 68 35 23.8 6 150 1.291 1.162 0.516 0.194 0.174 0.077
TPSV686M035#0200 V 68 35 23.8 6 200 1.118 1.006 0.447 0.224 0.201 0.089
TPSA154*050#9000 A 0.15 50 0.5 4 9000 0.091 0.082 0.037 0.822 0.739 0.329
TPSA224*050#7000 A 0.22 50 0.5 4 7000 0.104 0.093 0.041 0.725 0.652 0.290
TPSC105*050#2500 C 1 50 0.5 4 2500 0.210 0.189 0.084 0.524 0.472 0.210
TPSC155*050#1500 C 1.5 50 0.8 6 1500 0.271 0.244 0.108 0.406 0.366 0.162
TPSC155*050#2000 C 1.5 50 0.8 6 2000 0.235 0.211 0.094 0.469 0.422 0.188
TPSD225*050#1200 D 2.2 50 1.1 6 1200 0.354 0.318 0.141 0.424 0.382 0.170
TPSD335*050#0800 D 3.3 50 1.7 6 800 0.433 0.390 0.173 0.346 0.312 0.139
TPSD475*050#0300 D 4.7 50 2.4 6 300 0.707 0.636 0.283 0.212 0.191 0.085
TPSD475*050#0500 D 4.7 50 2.4 6 500 0.548 0.493 0.219 0.274 0.246 0.110
TPSD475*050#0700 D 4.7 50 2.4 6 700 0.463 0.417 0.185 0.324 0.292 0.130
TPSD685*050#0300 D 6.8 50 3.4 6 300 0.707 0.636 0.283 0.212 0.191 0.085
TPSD685*050#0500 D 6.8 50 3.4 6 500 0.548 0.493 0.219 0.274 0.246 0.110
TPSD685*050#0600 D 6.8 50 3.4 6 600 0.500 0.450 0.200 0.300 0.270 0.120
TPSE106*050#0400 E 10 50 5 6 400 0.642 0.578 0.257 0.257 0.231 0.103
TPSE106*050#0500 E 10 50 5 6 500 0.574 0.517 0.230 0.287 0.259 0.115
TPSE156*050#0250 E 15 50 5 6 250 0.812 0.731 0.325 0.203 0.183 0.081
All technical data relates to an ambient temperature of +25°C.
Capacitance and DF are measured at 120Hz, 0.5V RMS with a maximum
DC bias of 2.2 volts. DCL is measured at rated voltage after 5 minutes.
* Insert K for ±10% and M for ±20% Capacitance Tolerance
# Standard Plating – Insert R for 7" reel and S for 13" reel
# Gold Plating – Insert A for 7" reel and B for 13" reel
31
TPS Series III
New Generation Low ESR
HOW TO ORDER
Current application trends in circuit designs
for switch-mode power supplies, micro-
processors, and digital circuits call for high-
er operating frequencies and smoother
filtering. In order to function properly, com-
ponents with low ESR, high capacitance
and high reliability are required. The New
Third generation TPS Low ESR series is
based on the traditional MnO2process
that offers very low ESR levels previously
only seen by other technologies. Further,
continuous improvements in MnO2tech-
nology has allowed reductions in the resist-
ance of the capacitor electrodes in order to
further reduce ESR levels. Traditional MnO2
technology guarantees excellent line and
field performance, humidity stability and high
electrical and thermal stress resistance.
Technical Data: All technical data relate to an ambient temperature of +25°C
Capacitance Range: 4.7µF to 1500µF
Capacitance Tolerance: ±10%; ±20%
Rated Voltage (VR)+85°C: 2.5 4 6.3 10 16 20 25 35 50
Category Voltage (VC) +125°C: 1.7 2.7 4 7 10 13 17 23 33
Surge Voltage (VS) +85°C: 3.3 5.2 8 13 20 26 32 46 65
Surge Voltage (VS) +125°C: 2.2 3.4 5 8 13 16 20 28 40
Temperature Range: -55°C to +125°C
Environmental Classification: 55/125/56 (IEC 68-2)
Reliability: 1% per 1000 hours at 85°C, VRwith 0.1/V series impedance,
60% confidence level
Meets requirements of AEC-Q200
TECHNICAL SPECIFICATIONS
CASE DIMENSIONS: millimeters (inches)
Code EIA L±0.20 (0.008) W+0.20 (0.008) H+0.20 (0.008) W1±0.20 (0.008) A+0.30 (0.012) S Min.
Code -0.10 (0.004) -0.10 (0.004) -0.20 (0.008)
B3528-21 3.50 (0.138) 2.80 (0.110) 1.90 (0.075) 2.20 (0.087) 0.80 (0.031) 1.40 (0.055)
C6032-28 6.00 (0.236) 3.20 (0.126) 2.60 (0.102) 2.20 (0.087) 1.30 (0.051) 2.90 (0.114)
D7343-31 7.30 (0.287) 4.30 (0.169) 2.90 (0.114) 2.40 (0.094) 1.30 (0.051) 4.40 (0.173)
E7343-43 7.30 (0.287) 4.30 (0.169) 4.10 (0.162) 2.40 (0.094) 1.30 (0.051) 4.40 (0.173)
V7361-38 7.30 (0.287) 6.10 (0.240) 3.45 ±0.30 3.10 (0.120) 1.40 (0.055) 4.40 (0.173)
(0.136 ±0.012)
W* 6032-15 6.00 (0.236) 3.20 (0.126) 1.50 (0.059) max. 2.20 (0.087) 1.30 (0.051) 2.90 (0.114)
Y** 7343-20 7.30 (0.287) 4.30 (0.169) 2.00 (0.079) max. 2.40 (0.094) 1.30 (0.051) 4.40 (0.173)
W1dimension applies to the termination width for A dimensional area only.
* Low Profile Version of C Case (max. height 1.5 [0.059])
** Low Profile Version of D Case (max. height 2.0 [0.079])
TPS
Type
D
Case Size
See table
above
227
Capacitor Code
pF code: 1st two
digits represent
significant figures,
3rd digit represents
multiplier (number of
zeros to follow)
K
Capacitance
Tolerance
K=±10%
M=±20%
010
Rated DC Voltage
002=2.5Vdc
004=4Vdc
006=6.3Vdc
010=10Vdc
016=16Vdc
020=20Vdc
025=25Vdc
035=35Vdc
050=50Vdc
R
Packaging
R = 7" T/R
(Lead Free since
production date 1/1/04)
S = 13" T/R
(Lead Free since
production date 1/1/04)
A = Gold Plating
7" Reel
B = Gold Plating
13" Reel
0050
Maximum ESR in
Milliohms
See note below
NOTE: The EIA & CECC standards for low ESR Solid Tantalum Capacitors
allow an ESR movement to 1.25 times catalog limit post mounting.
For part marking see page 121
32
TPS Series III
New Generation Low ESR
ESR limits quoted in brackets (milliohms)
CAPACITANCE AND RATED VOLTAGE, VR(VOLTAGE CODE) RANGE
LETTER DENOTES CASE SIZE (ESR in mΩ)
SERIES III MATRIX
For TPS series and the case sizes C, D and E the ESR limits are printed on capacitor side in the
following format:
T x x x -where x x x is ESR limit in milliohms i.e. T100 represents max. ESR of 100 milliohms.
NOTE: The EIA & CECC standards for low ESR Solid Tantalum Capacitors
allow an ESR movement to 1.25 times catalog limit post mounting.
Red - Developmental Ratings - subject to change
Capacitance Rated Voltage DC (VR) to 85°C
µF Code 2.5V (e) 4V (G) 6.3V (J) 10V (A) 16V (C) 20V (D) 25V (E) 35V (V) 50V (T)
4.7 475 D(300)
6.8 685
10 106 D(125)
15 156 D(100) D(100)
22 226 C(150) C(100) D(100) D(125)
E(125)
D(100) D(200)
33 336 C(150) W(140) D(100) E(100) E(100)
V(80)
47 476 B(250) W(125) D(80) D(75) E(80) V(100)
E(70)
68 686 W(110) Y(70,100) D(70) D(70) E(125)
V(80)
C(75) C(75) D(60)
100 107 Y(65,100) D(50) E(55) V(60)
Y(65,100) Y(65,100)
150 157 D(50) E(50)
D(50) Y(65,100) V(45)
220 227 D(45) D(40) D(50) D(50) V(45,50)
Y(65,100) E(50)
330 337 D(35) D(45) E(40)
V(40)
470 477 D(45) E(45) E(45)
E(35) V(40)
680 687 E(40) E(45)
V(35)
1000 108 E(30) V(25)
E(40)
1500 158 V(30)
33
TPS Series III
New Generation Low ESR
RATINGS & PART NUMBER REFERENCE
All technical data relates to an ambient temperature of +25°C.
Capacitance and DF are measured at 120Hz, 0.5V RMS with a maximum
DC bias of 2.2 volts. DCL is measured at rated voltage after 5 minutes.
* Insert K for ±10% and M for ±20% Capacitance Tolerance
# Standard Plating – Insert R for 7" reel and S for 13" reel
# Gold Plating – Insert A for 7" reel and B for 13" reel
NOTE: AVX reserves the right to supply a higher voltage rating or tighter
tolerance part in the same case size, to the same reliability standards.
Rated DCL DF ESR
100kHz Ripple Current Ratings (A) 100kHz Ripple Voltage Ratings (V)
AVX Case Capacitance Voltage (µA) % Max. (mΩ)
Part No. Size (µF) (V) Max. Max. @100kHz 25ºC 85ºC 125ºC 25ºC 85ºC 125ºC
TPSD227*002#0045 D 220 2.5 4.4 8 45 1.826 1.643 0.730 0.082 0.074 0.033
TPSE108*002#0030 E 1000 2.5 20 14 30 2.345 2.111 0.938 0.070 0.063 0.028
TPSV158*002#0030 V 1500 2.5 30 20 30 2.887 2.598 1.155 0.087 0.078 0.035
TPSD227*004#0040 D 220 4 8.8 8 40 1.936 1.743 0.775 0.077 0.070 0.031
TPSD337*004#0035 D 330 4 13.2 8 35 2.070 1.863 0.828 0.072 0.065 0.029
TPSD477*004#0045 D 470 4 18.8 12 45 1.826 1.643 0.730 0.082 0.074 0.033
TPSE477*004#0035 E 470 4 18.8 10 35 2.171 1.954 0.868 0.076 0.068 0.030
TPSE687*004#0040 E 680 4 27.2 10 40 2.031 1.828 0.812 0.081 0.073 0.032
TPSV108*004#0025 V 1000 4 40 16 25 3.162 2.846 1.265 0.079 0.071 0.032
TPSB476*006#0250 B 47 6.3 3 6 250 0.583 0.525 0.233 0.146 0.131 0.058
TPSW686*006#0110 W 68 6.3 4.3 6 110 0.905 0.814 0.362 0.099 0.090 0.040
TPSC107*006#0075 C 100 6.3 6.3 6 75 1.211 1.090 0.484 0.091 0.082 0.036
TPSY107*006#0100 Y 100 6.3 6.3 6 100 1.118 1.006 0.447 0.112 0.101 0.045
TPSD157*006#0050 D 150 6.3 9.5 6 50 1.732 1.559 0.693 0.087 0.078 0.035
TPSD227*006#0050 D 220 6.3 13.9 8 50 1.732 1.559 0.693 0.087 0.078 0.035
TPSY227*006#0100 Y 220 6.3 13.9 10 100 1.118 1.006 0.447 0.112 0.101 0.045
TPSD337*006#0045 D 330 6.3 20.8 8 45 1.826 1.643 0.730 0.082 0.074 0.033
TPSE477*006#0045 E 470 6.3 29.6 10 45 1.915 1.723 0.766 0.086 0.078 0.034
TPSE687*006#0045 E 680 6.3 42.8 10 45 1.915 1.723 0.766 0.086 0.078 0.034
TPSV687*006#0035 V 680 6.3 42.8 14 35 2.673 2.405 1.069 0.094 0.084 0.037
TPSC336*010#0150 C 33 10 3.3 6 150 0.856 0.771 0.343 0.128 0.116 0.051
TPSW476*010#0125 W 47 10 4.7 6 125 0.849 0.764 0.339 0.106 0.095 0.042
TPSY686*010#0100 Y 68 10 6.8 6 100 1.118 1.006 0.447 0.112 0.101 0.045
TPSC107*010#0075 C 100 10 10 8 75 1.211 1.090 0.484 0.091 0.082 0.036
TPSD107*010#0050 D 100 10 10 6 50 1.732 1.559 0.693 0.087 0.078 0.035
TPSY107*010#0100 Y 100 10 10 6 100 1.118 1.006 0.447 0.112 0.101 0.045
TPSD157*010#0050 D 150 10 15 6 50 1.732 1.559 0.693 0.087 0.078 0.035
TPSY157*010#0100 Y 150 10 15 6 100 1.118 1.006 0.447 0.112 0.101 0.045
TPSD227*010#0050 D 220 10 22 8 50 1.732 1.559 0.693 0.087 0.078 0.035
TPSE227*010#0050 E 220 10 22 8 50 1.817 1.635 0.727 0.091 0.082 0.036
TPSE337*010#0040 E 330 10 33 8 40 2.031 1.828 0.812 0.081 0.073 0.032
TPSV337*010#0040 V 330 10 33 10 40 2.500 1.250 1.000 0.100 0.090 0.040
TPSE477*010#0045 E 470 10 47 10 45 1.915 1.723 0.766 0.086 0.078 0.034
TPSV477*010#0040 V 470 10 47 10 40 2.500 2.250 1.000 0.100 0.090 0.040
TPSC226*016#0150 C 22 16 3.5 6 150 0.856 0.771 0.343 0.128 0.116 0.051
TPSW336*016#0140 W 33 16 5.3 6 140 0.802 0.722 0.321 0.112 0.101 0.045
TPSD476*016#0080 D 47 16 7.5 6 80 1.369 1.232 0.548 0.110 0.099 0.044
TPSD686*016#0070 D 68 16 10.8 6 70 1.464 1.317 0.586 0.102 0.092 0.041
TPSD107*016#0060 D 100 16 16 6 60 1.581 1.423 0.632 0.095 0.085 0.038
TPSE107*016#0055 E 100 16 16 6 55 1.732 1.559 0.693 0.095 0.086 0.038
TPSY107*016#0100 Y 100 16 16 8 100 1.118 1.006 0.447 0.112 0.101 0.045
TPSV157*016#0045 V 150 16 24 6 45 2.357 2.121 0.943 0.106 0.095 0.042
TPSV227*016#0050 V 220 16 35.2 8 50 2.236 2.012 0.894 0.112 0.101 0.045
34
TPS Series III
New Generation Low ESR
RATINGS & PART NUMBER REFERENCE
All technical data relates to an ambient temperature of +25°C.
Capacitance and DF are measured at 120Hz, 0.5V RMS with a maximum
DC bias of 2.2 volts. DCL is measured at rated voltage after 5 minutes.
* Insert K for ±10% and M for ±20% Capacitance Tolerance
# Standard Plating – Insert R for 7" reel and S for 13" reel
# Gold Plating – Insert A for 7" reel and B for 13" reel
NOTE: AVX reserves the right to supply a higher voltage rating or tighter
tolerance part in the same case size, to the same reliability standards.
Rated DCL DF ESR
100kHz Ripple Current Ratings (A) 100kHz Ripple Voltage Ratings (V)
AVX Case Capacitance Voltage (µA) % Max. (mΩ)
Part No. Size (µF) (V) Max. Max. @100kHz 25ºC 85ºC 125ºC 25ºC 85ºC 125ºC
TPSC226*020#0100 C 22 20 4.4 6 100 1.049 0.944 0.420 0.105 0.094 0.042
TPSD336*020#0100 D 33 20 6.6 6 100 1.225 1.102 0.490 0.122 0.110 0.049
TPSD476*020#0075 D 47 20 9.4 6 75 1.414 1.273 0.566 0.106 0.095 0.042
TPSE476*020#0070 E 47 20 9.4 6 70 1.535 1.382 0.614 0.107 0.097 0.043
TPSD686*020#0070 D 68 20 13.6 6 70 1.464 1.317 0.586 0.102 0.092 0.041
TPSV107*020#0060 V 100 20 20 8 60 2.041 1.837 0.816 0.122 0.110 0.049
TPSD156*025#0100 D 15 25 3.8 6 100 1.225 1.102 0.490 0.122 0.110 0.049
TPSD226*025#0100 D 22 25 5.5 6 100 1.225 1.102 0.490 0.122 0.110 0.049
TPSD336*025#0100 D 33 25 8.3 6 100 1.225 1.102 0.490 0.122 0.110 0.049
TPSE336*025#0100 E 33 25 8.3 6 100 1.285 1.156 0.514 0.128 0.116 0.051
TPSE476*025#0080 E 47 25 8.3 6 80 1.436 1.293 0.574 0.115 0.103 0.046
TPSE686*025#0125 E 68 25 17 6 125 1.149 1.034 0.460 0.144 0.129 0.057
TPSV686*025#0080 V 68 25 17 6 80 1.768 1.591 0.707 0.141 0.127 0.057
TPSD106*035#0125 D 10 35 3.5 6 125 1.095 0.986 0.438 0.137 0.123 0.055
TPSD156*035#0100 D 15 35 5.3 6 100 1.225 1.102 0.490 0.122 0.110 0.049
TPSD226*035#0125 D 22 35 7.7 6 125 1.095 0.986 0.438 0.137 0.123 0.055
TPSE226*035#0125 E 22 35 7.7 6 125 1.149 1.034 0.460 0.144 0.129 0.057
TPSD336*035#0200 D 33 35 11.6 6 200 0.866 0.779 0.346 0.173 0.156 0.069
TPSE336*035#0100 E 33 35 11.6 6 100 1.285 1.156 0.514 0.128 0.116 0.051
TPSD475*050#0300 D 4.7 50 2.4 6 300 0.707 0.636 0.283 0.212 0.191 0.085
35
TPM Multianode
Tantalum Ultra Low ESR Capacitor
HOW TO ORDER
Low ESR, high capacitance and high ripple
current are the key parameters for processor
filtering. Multianode configuration within a
standard E case package meets these
requirements. Parameters such as ESR
15mΩ, capacitance 1500µF and ripple
current above 4A rms makes TPM series
ready to use with the latest processor
families.
Technical Data: All technical data relate to an ambient temperature of +25°C
Capacitance Range: 10µF to 1500µF
Capacitance Tolerance: ±10%, ±20%
Rated Voltage (VR)+85°C: 2.5 4 6.3 10 16 20 25 35 50
Category Voltage (VC) +125°C: 1.7 2.7 4 7 10 13 17 23 33
Surge Voltage (VS) +85°C: 3.3 5.2 8 13 20 26 32 46 65
Surge Voltage (VS) +125°C: 2.2 3.4 5 8 13 16 20 28 40
Temperature Range: -55°C to +125°C
Reliability: 1% per 1000 hours at 85°C, VRwith 0.1Ω/V series impedance, 60% confidence level
TECHNICAL SPECIFICATIONS
CASE DIMENSIONS: millimeters (inches)
Code EIA L±0.20 (0.008) W+0.20 (0.008) H+0.20 (0.008) W1±0.20 (0.008) A+0.30 (0.012) S Min.
Code -0.10 (0.004) -0.10 (0.004) -0.20 (0.008)
E7343-43 7.30 (0.287) 4.30 (0.169) 4.10 (0.162) 2.40 (0.094) 1.30 (0.051) 4.40 (0.173)
V7361-38 7.30 (0.287) 6.10 (0.240) 3.45 ±0.30 3.10 (0.120) 1.40 (0.055) 4.40 (0.173)
(0.136 ±0.012)
W1dimension applies to the termination width for A dimensional area only.
TPM
Type
E
Case Size
See table
above
108
Capacitance Code
pF code: 1st two
digits represent
significant figures,
3rd digit represents
multiplier (number of
zeros to follow)
*
Capacitance
Tolerance
K=±10%
M=±20%
004
Rated DC Voltage
002=2.5Vdc
004=4Vdc
006=6.3Vdc
010=10Vdc
016=16Vdc
020=20Vdc
025=25Vdc
035=35Vdc
050=50Vdc
R
Packaging
R = 7" T/R
Lead Free
S = 13" T/R
Lead Free
0018
Maximum ESR
in Milliohms
See note below
NOTE: The EIA & CECC standards for low ESR Solid Tantalum Capacitors
allow an ESR movement to 1.25 times catalog limit post mounting.
For part marking see page 121
36
TPM Multianode
Tantalum Ultra Low ESR Capacitor
CAPACITANCE AND RATED VOLTAGE RANGE
LETTER DENOTES CASE SIZE ESR LIMIT IN BRACKETS
Developmental Ratings - subject to change, AVX reserve rights to change ESR specification prior to release.
Note: Voltage ratings are minimum values. AVX reserves the right to supply
higher ratings in the same case size, to the same reliability standards.
Capacitance Rated Voltage DC (VR) to 85°C
µF Code 2.5V (e) 4V (G) 6.3V (J) 10V (A) 16V (C) 20V (D) 25V (E) 35V (V) 50V (T)
10 106 E(120)
15 156 E
22 226 E(60,100) E
33 336 E(50,65)
47 476 E(55,65)
68 686 E(45,55) V
100 107 E(35,45) E
150 157 E(30,40) E
220 227 E(25,40)
330 337 E(23,35) E
470 477 E(18,23,30) E(23,30)
680 687 E(18,23) E(18,23), V(23) E
1000 108 E(18,23), V(18) E
1500 158 E(12,15,18) E(15,18)
2200 228 E(18,25)
37
RATINGS & PART NUMBER REFERENCE
All technical data relates to an ambient temperature of +25°C.
Capacitance and DF are measured at 120Hz,
0.5V RMS with maximum DC bias of 2.2 volts.
DCL is measured at rated voltage after 5 minutes.
*Insert K for ±10% and M for ±20% Capacitance Tolerance
TPM MULTIANODE CONSTRUCTION
TPM Multianode
Tantalum Ultra Low ESR Capacitor
Rated DCL DF ESR
100kHz Ripple Current Ratings (A) 100kHz Ripple Voltage Ratings (V)
AVX Case Capacitance Voltage (µA) % Max. (mΩ)
Part No. Size (µF) (V) Max. Max. @100kHz 25ºC 85ºC 125ºC 25ºC 85ºC 125ºC
2.5 Volt @ 85°C (1.7 Volt @ 125°C)
TPME158*002#0012 E 1500 2.5 38 6 12 4.743 4.269 1.897 0.057 0.051 0.023
TPME158*002#0015 E 1500 2.5 38 6 15 4.243 3.818 1.697 0.064 0.057 0.025
TPME158*002#0018 E 1500 2.5 38 6 18 3.873 3.486 1.549 0.070 0.063 0.028
4 Volt @ 85°C (2.7 Volt @ 125°C)
TPME687*004#0018 E 680 4 27 6 18 3.873 3.486 1.549 0.070 0.063 0.028
TPME687*004#0023 E 680 4 27 6 23 3.426 3.084 1.370 0.079 0.071 0.032
TPME108*004#0018 E 1000 4 40 6 18 3.873 3.486 1.549 0.070 0.063 0.028
TPME108*004#0023 E 1000 4 40 6 23 3.426 3.084 1.370 0.079 0.071 0.032
TPMV108*004#0018 V 1000 4 40 6 18 3.979 3.581 1.592 0.072 0.064 0.029
TPME158*004#0015 E 1500 4 40 6 15 4.243 3.818 1.697 0.064 0.057 0.025
TPME158*004#0018 E 1500 4 40 6 18 3.873 3.486 1.549 0.070 0.063 0.028
6.3 Volt @ 85°C (4 Volt @ 125°C)
TPME477*006#0018 E 470 6.3 28 6 18 3.873 3.486 1.549 0.070 0.063 0.028
TPME477*006#0023 E 470 6.3 28 6 23 3.426 3.084 1.370 0.079 0.071 0.032
TPME477*006#0030 E 470 6.3 28 6 30 3.000 2.700 1.200 0.090 0.081 0.036
TPME687*006#0018 E 680 6.3 41 6 18 3.873 3.486 1.549 0.070 0.063 0.028
TPME687*006#0023 E 680 6.3 41 6 23 3.426 3.084 1.370 0.079 0.071 0.032
TPMV687*006#0023 V 680 6.3 41 6 23 3.520 3.168 1.408 0.081 0.073 0.032
10 Volt @ 85°C (7 Volt @ 125°C)
TPME337*010#0023 E 330 10 33 6 23 3.426 3.084 1.370 0.079 0.071 0.032
TPME337*010#0035 E 330 10 33 6 35 2.777 2.500 1.111 0.097 0.087 0.039
TPME477M010#0023 E 470 10 47 6 23 3.426 3.084 1.370 0.079 0.071 0.032
TPME477M010#0030 E 470 10 47 6 30 3.000 2.700 1.200 0.090 0.081 0.036
16 Volt @ 85°C (10 Volt @ 125°C)
TPME157*016#0030 E 150 16 24 6 30 3.000 2.700 1.200 0.090 0.081 0.036
TPME157*016#0040 E 150 16 24 6 40 2.598 2.338 1.039 0.104 0.094 0.042
TPME227*016#0025 E 220 16 35 6 25 3.286 2.958 1.315 0.082 0.074 0.033
TPME227*016#0040 E 220 16 35 6 40 2.598 2.338 1.039 0.104 0.094 0.042
20 Volt @ 85°C (13 Volt @ 125°C)
TPME107*020#0035 E 100 20 20 6 35 2.777 2.500 1.111 0.097 0.087 0.039
TPME107*020#0045 E 100 20 20 6 45 2.449 2.205 0.980 0.110 0.099 0.044
25 Volt @ 85°C (17 Volt @ 125°C)
TPME686*025#0045 E 68 25 17 6 45 2.449 2.205 0.980 0.110 0.099 0.044
TPME686*025#0055 E 68 25 17 6 55 2.216 1.994 0.886 0.122 0.110 0.049
35 Volt @ 85°C (23 Volt @ 125°C)
TPME226*335#0060 E 22 35 8 6 60 2.121 1.909 0.849 0.127 0.115 0.051
TPME226*035#0100 E 22 35 8 6 100 1.643 1.479 0.657 0.164 0.148 0.066
TPME336*035#0050 E 33 35 12 6 50 2.324 2.091 0.930 0.116 0.105 0.046
TPME336*035#0065 E 33 35 12 6 65 2.038 1.834 0.815 0.132 0.119 0.053
TPME476*035#0055 E 47 35 16 6 55 2.216 1.994 0.886 0.122 0.110 0.049
TPME476*035#0065 E 47 35 16 6 65 2.038 1.834 0.815 0.132 0.119 0.053
50 Volt @ 85°C (33 Volt @ 125°C)
TPME106*050#0120 E 10 50 5 6 120 1.500 1.350 0.600 0.180 0.162 0.072
38
%
TPC Series
Low ESR TACmicrochip™
The world’s smallest surface mount
Tantalum capacitor, small enough to create
space providing room for ideas to grow.
TACmicrochip™ is a major breakthrough
in miniaturization without reduction in
performance.
It offers you the highest energy store in an
0603 or 0805 case size; enhanced high
frequency operation through unique ESR
performance with temperature and voltage
stability.
CASE DIMENSIONS: millimeters (inches)
Termination Minimum Average
Code EIA EIA Length (L) Width (W) Height (H) Spacing(S) Termination Mass
Code Metric Length (Lt)
L0603 1608-10 1.60 0.85 0.85 0.65 min 0.15 (0.006) 8.6mg
(0.063 ) (0.033 ) (0.033 )
R0805 2012-15
2.00 1.35 1.35
0.85 min 0.15 (0.006) 29.9mg
(0.079 ) (0.053 ) (0.053 )
L
SLt W
H
POLARITY BAND NOT TO
EXCEED CENTER LINE
+0.20
-0.00
+0.008
-0.000
+0.20
-0.00
+0.008
-0.000
+0.15
-0.00
+0.006
-0.000
+0.15
-0.00
+0.006
-0.000
+0.15
-0.00
+0.006
-0.000
+0.15
-0.00
+0.006
-0.000
TPC
Type
TACmicrochip™
R
Case Size
0603=L
0805=R
106
Capacitance Code
pF code: 1st two digits
represent significant figures,
3rd digit represents multiplier
(number of zeros to follow)
M
Tolerance
K=±10%
M=±20%
010
Rated DC Voltage
002=2Vdc
003=3Vdc
004=4Vdc
006=6.3Vdc
010=10Vdc
016=16Vdc
020=20Vdc
025=25Vdc
1800
Maximum ESR
in Milliohms
See note below
HOW TO ORDER
R
Packaging
(see table below)
Standard
Reel Tin Termination Gold Termination
Size Plastic Tape Plastic Tape
Case R/L R/L
7" Rxxxx Axxxx
41⁄4"Xxxxx Fxxxx
Packaging Suffix
Technical Data: All technical data relate to an ambient temperature of +25°C
Capacitance Range: 3.3µF to 47µF
Capacitance Tolerance: ±10%; ±20%
Leakage Current DCL: 0.01CV or 0.5µA whichever is the greater
Rated Voltage (VR)+85°C: 3 4 6.3 10 16 20 25
Category Voltage (VC)+125°C: 2 2.7 4 7 10 13 17
Surge Voltage (VS)+85°C: 3.9 5.2 8 13 20 26 32
Surge Voltage (VS)+125°C: 2.6 3.2 5 8 12 16 20
Temperature Range: -55°C to +125°C
Reliability: 1% per 1000 hours at 85°C, V with 0.1Ω/V series impedance,
60% confidence level
Termination Finish: Nickel and Tin Plating (standard),
Nickel and Gold Plating option available upon request
TECHNICAL SPECIFICATIONS
ENVIRONMENTAL FRIENDLY
COMPONENT
NOTE: The EIA & CECC standards for low ESR Solid Tantalum Capacitors
allow an ESR movement to 1.25 times catalog limit post mounting.
NOTE: xxxx = ESR Value in Milliohms
39
Capacitance Voltage Rating DC (VR) at 85°C
Cap. (µF) Code 2.0V 3.0V 4.0V 6.3V 10V 16V 20V 25V
0.33 334
0.47 474
0.68 684
1.0 105 R(3000)
1.5 155
2.2 225
3.3 335 L(5000)
4.7 475 L(5000)
6.8 685
10 106 L(4000) L(4000),R(1800) R(1800)
15 156 R(1800) R(1500)
22 226 R(1800) R(1500)
33 336 R(1800) R(1500)
47 476 R(1500)
68 686
100 107
150 157
220 227
TPC Series
Low ESR TACmicrochip™
LOW ESR RANGE
(LETTER DENOTES CASE SIZE) (ESR in mΩ)
Rated DCL DF ESR 100kHz Ripple Current Ratings (A) 100kHz Ripple Voltage Ratings (V)
AVX EIA Case Capacitance Voltage (µA) % Max. (mΩ)
Part No. Size (µF) (V) Max. Max. @100kHz 25°C 85°C 125°C 25°C 85°C 125°C
TPCR336*003# 0805 R 33 3.0 1.0 10 1800 0.158 0.142 0.063 0.285 0.256 0.114
TPCR476*003# 0805 R 47 3.0 1.5 10 1500 0.173 0.156 0.069 0.260 0.234 0.104
TPCR226*004# 0805 R 22 4.0 0.9 8 1800 0.158 0.142 0.063 0.285 0.256 0.114
TPCR336*004# 0805 R 33 4.0 1.3 10 1500 0.173 0.156 0.069 0.260 0.234 0.104
TPCL106M006# 0603 L 10 6.3 0.6 10 4000 0.079 0.071 0.032 0.316 0.285 0.126
TPCR156*006# 0805 R 15 6.3 0.9 8 1800 0.158 0.142 0.063 0.285 0.256 0.114
TPCR226*006# 0805 R 22 6.3 1.4 10 1500 0.173 0.156 0.069 0.260 0.234 0.104
TPCL335*010# 0603 L 3.3 10.0 0.5 8 5000 0.071 0.064 0.028 0.354 0.318 0.141
TPCL475M010# 0603 L 4.7 10.0 0.5 10 5000 0.071 0.064 0.028 0.354 0.318 0.141
TPCL106M010# 0603 L 10 10.0 1.0 20 4000 0.079 0.071 0.032 0.316 0.285 0.126
TPCR106*010# 0805 R 10 10.0 1.0 8 1800 0.158 0.142 0.063 0.285 0.256 0.114
TPCR156*010# 0805 R 15 10.0 1.5 10 1500 0.173 0.156 0.069 0.260 0.234 0.104
TPCR106*016# 0805 R 10 16.0 1.6 10 1800 0.158 0.142 0.063 0.285 0.256 0.114
TPCR105*025# 0805 R 1.0 25.0 0.5 8 3000 0.122 0.110 0.049 0.367 0.331 0.147
RATINGS & PART NUMBER REFERENCE
All technical data relates to an ambient temperature of +25°C. Capacitance and DF
are measured at 120Hz, 0.5V RMS with a maximum DC bias of 2.2 volts. DCL is
measured at rated voltage after 5 minutes.
*Insert K for ±10% and M for ±20% Capacitance Tolerance
NOTE: AVX reserves the right to supply a higher voltage rating or tighter
tolerance part in the same case size, to the same reliability standards.
The EIA & CECC standards for Low ESR Solid Tantalum Capacitors
allow an ESR movement to 1.25 times catalog limit post mounting.
Polarity
Band
Capacitance Value in pF
106 = 10µF
Rated Voltage
A = 10V
Year Code
T=2005
106 A
T 1 5 BB
Week Number
2 Digit Batch ID
AVX LOGO
Polymer
Marking
40
LEAD-FREE COMPATIBLE
COMPONENT
ENVIRONMENTAL FRIENDLY
COMPONENT
The TCJ Series of tantalum capacitors with a
conductive polymer electrode offers lower ESR,
safer non-ignition failure mode and better
capacitance retention compared to the conven-
tional MnO2electrode capacitors. The TCJ
series is suitable for power management
systems with operating temperatures up to
125°C. In addition the TCJ series complies with
RoHS requirements and it is an environmentally
friendly component ready for lead-free assembly
systems up to 3x reflow with 260°C peak
temperature. Small A and B case sizes are ideal
for use with the latest portable handheld
electronics such as cellular phones, PDAs or
other digital equipment such as cameras.
TCJ
Type
A
Case Size
See table
above
226
Capacitance Code
pF code: 1st two digits
represent significant figures,
3rd digit represents multiplier
(number of zeros to follow)
M
Tolerance
M=±20%
004
Rated DC Voltage
002=2.5Vdc
004=4Vdc
006=6.3Vdc
010=10Vdc
HOW TO ORDER
R
Packaging
R=7" T/R
S=13" T/R
Reel Quantity R = 7" Reel S = 13" Reel Tape Width
A Case 2000 8000 8 mm
B Case 2000 8000 8 mm
T Case 2500 10000 8 mm
W Case 1000 5000 12 mm
YCase 1000 4000 12 mm
Packaging Suffix
Technical Data: All technical data relate to an ambient temperature of +25°C
Capacitance Range: 10µF to 100µF
Capacitance Tolerance: ±20%
Leakage Current DCL: 0.1CV
Rated Voltage (VR)+85°C: 2.5 4 6.3 10
Category Voltage (VC)+125°C: 1.7 2.7 4 7
Surge Voltage (VS)+85°C: 3.3 5.2 8 13
Surge Voltage (VS) +125°C: 2.0 3.4 5.0 8
Temperature Range: -55°C to +125°C
Reliability: 1% per 1000 hours at 85°C, VRwith 0.1Ω/VRseries impedance,
60% confidence level
TECHNICAL SPECIFICATIONS
TCJ Series
Tantalum Solid Electrolytic Chip Capacitors
with Conductive Polymer Electrode
CASE DIMENSIONS: millimeters (inches)
Code EIA L±0.20 (0.008) W+0.20 (0.008) H+0.20 (0.008) W1±0.20 (0.008) A+0.30 (0.012) S Min.
Code -0.10 (0.004) -0.10 (0.004) -0.20 (0.008)
A3216-18 3.20 (0.126) 1.60 (0.063) 1.60 (0.063) 1.20 (0.047) 0.80 (0.031) 1.10 (0.043)
B3528-21 3.50 (0.138) 2.80 (0.110) 1.90 (0.075) 2.20 (0.087) 0.80 (0.031) 1.40 (0.055)
T3528-12 3.50 (0.138) 2.80 (0.110) 1.20 (0.047) max 2.20 (0.087) 0.80 (0.031) 1.40 (0.055)
W6032-15 6.00 (0.236) 3.20 (0.126) 1.50 (0.059) max 2.20 (0.087) 1.30 (0.051) 2.90 (0.114)
Y7343-20 7.30 (0.287) 4.30 (0.169) 2.00 (0.079) max 2.40 (0.094) 1.30 (0.051) 4.40 (0.173)
W1dimension applies to the termination width for A dimensional area only.
0300
ESR in mΩ
41
TCJ Series
Tantalum Solid Electrolytic Chip Capacitors
with Conductive Polymer Electrode
Capacitance Rated Voltage DC (VR) to 85°C
Cap. (µF) Code 4V (G) 6.3V (J) 10V (A)
10 106 A (300) A (300)
15 156 A (300) A (300)
22 226 A (300) B (300)
33 336 B (200)
47 476 T (80), B (70) B (70)
68 686 B (70) B (70)
100 107 B (70) B (70)
150 157 W (70) W (70), Y (25)
220 227 Y (25) Y (25)
CAPACITANCE AND RATED VOLTAGE, VR(VOLTAGE CODE) RANGE
(LETTER DENOTES CASE SIZE)
RATINGS & PART NUMBER REFERENCE
All technical data relates to an ambient temperature of +25°C.
Capacitance and DF are measured at 120Hz, 0.5 RMS with
DC bias of 2.2 volts. DCL is measured at rated voltage after
5 minutes.
NOTE: AVX reserves the right to supply a higher voltage
rating in the same case size, to the same reliability
standards.
Developmental Ratings - subject to change.
Available Ratings, (ESR ratings in mOhms in brackets)
The EIA and CECC standards for low ESR solid Tantalum capacitors allow an ESR movement to 1.25 times catalog limit post mounting.
# insert R for 7" reel or S for 13" reel
Rated DCL DF ESR
100kHz RMS Current (mA) 100kHz RMS Voltage (mV)
AVX Case Capacitance Voltage (µA) % Max. (mΩ)
Part No. Size (µF) (V) Max. Max. @100kHz 25ºC 85ºC 125ºC 25ºC 85ºC 125ºC
4 Volt @ 85ºC (2.7 Volt @ 125ºC)
TCJA156M004#0300 A 15 4 6.0 6 300 500 450 200 150 135 60
TCJA226M004#0300 A 22 4 8.8 6 300 500 450 200 150 135 60
TCJB686M004#0070 B 68 4 27.2 6 70 1102 992 441 77 69 31
TCJB107M004#0070 B 100 4 40.0 8 70 1102 992 441 77 69 31
6.3 Volt @ 85ºC (4 Volt @ 125ºC)
TCJA106M006#0300 A 10 6.3 6.0 6 300 500 450 200 150 135 60
TCJA156M006#0300 A 15 6.3 9.0 6 300 500 450 200 150 135 60
TCJB476M006#0070 B 47 6.3 28.2 6 70 1102 992 441 77 69 31
TCJT476M006#0080 T 47 6.3 28.2 8 80 1000 900 400 80 72 32
TCJB686M006#0070 B 68 6.3 40.8 8 70 1102 992 441 77 69 31
TCJB107M006#0070 B 100 6.3 60.0 10 70 1102 992 441 77 69 31
10 Volt @ 85ºC (7 Volt @ 125ºC)
TCJA106M010#0300 A 10 10 10.0 6 300 500 450 200 150 135 60
TCJB226M010#0300 B 22 10 22.0 6 300 532 479 213 160 144 64
TCJB336M010#0200 B 33 10 33.0 6 200 652 587 261 130 117 52
TCJB476M010#0070 B 47 10 47.0 6 70 1102 992 441 77 69 31
Voltage Derating vs Temperature Recommendation
100% 100%
83%
67%
80%
67%
53%
80%
0%
20%
40%
60%
80%
100%
120%
-55°C 0°C 85°C 105°C 125°C
rated range
recommended derating
42
ENVIRONMENTAL FRIENDLY
COMPONENT
TLJ
Type
W
Case Size
See table
above
157
Capacitance Code
pF code: 1st two digits
represent significant figures,
3rd digit represents multiplier
(number of zeros to follow)
M
Tolerance
M=±20%
010
Rated DC Voltage
002=2.5Vdc
004=4Vdc
006=6.3Vdc
010=10Vdc
016=16Vdc
HOW TO ORDER
R
Packaging
R=7" T/R
S=13" T/R
Reel Quantity R = 7" Reel S = 13" Reel Tape Width
A Case 2000 10000 8 mm
B Case 2000 10000 8 mm
R Case 2500 10000 8 mm
T Case 2500 10000 8 mm
W Case 1000 5000 12 mm
Packaging Suffix
Marking
Technical Data: All technical data relate to an ambient temperature of +25°C
Capacitance Range: 10µF to 150µF
Capacitance Tolerance: ±20%
Rated Voltage (VR)-55°C ≤+40°C: 4 6.3 10 16
Category Voltage (VC)at 85°C: 2 3.15 5 8
Category Voltage (VC)at 125°C: 0.8 1.26 2 3.2
Temperature Range: -55°C to +125°C with category voltage
Reliability: 0.2% per 1000 hours at 85°C, 0.5xVR, with 0.1Ω/V series impedance with
60% confidence level
TECHNICAL SPECIFICATIONS
TLJ Series
Tantalum Solid Electrolytic Chip Capacitors
Consumer Series
CASE DIMENSIONS: millimeters (inches)
Code EIA L±0.20 (0.008) W+0.20 (0.008) H+0.20 (0.008) W1±0.20 (0.008) A+0.30 (0.012) S Min.
Code -0.10 (0.004) -0.10 (0.004) -0.20 (0.008)
A3216-18 3.20 (0.126) 1.60 (0.063) 1.60 (0.063) 1.20 (0.047) 0.80 (0.031) 1.10 (0.043)
B3528-21 3.50 (0.138) 2.80 (0.110) 1.90 (0.075) 2.20 (0.087) 0.80 (0.031) 1.40 (0.055)
R2012-12 2.05 (0.081) 1.30 (0.051) 1.20 (0.047) max 1.0±0.1 0.50 (0.020) 0.85 (0.033)
(0.039±0.004)
T3528-12 3.50 (0.138) 2.80 (0.110) 1.20 (0.047) max 2.20 (0.087) 0.80 (0.031) 1.40 (0.055)
W6032-15 6.00 (0.236) 3.20 (0.126) 1.50 (0.059) max 2.20 (0.087) 1.30 (0.051) 2.90 (0.114)
W1dimension applies to the termination width for A dimensional area only.
Polarity
Band
Capacitance Value in pF
157 = 150µF
Rated Voltage
A = 10V
Yea r Code
T=2005
157 A
T 15 BB
Week
Number
2 Digit Batch ID
AVX LOGO
0200
ESR in mΩ
The consumer TLJ series of tantalum
capacitors offers high capacitance vs.
voltage ratio based on stable MnO2
electrode capacitors. The TLJ series
complies with RoHS requirements
and it is an environmentally friendly
component ready for lead-free assem-
bly systems up to 3x reflow with 260°C
peak temperature. The TLJ series is
suitable for wide range of consumer
electronic applications such as the
latest portable handheld electronics,
cellular phones, PDAs or other digital
equipment and cameras.
• High Volumetric Efficiency
• Environmentally Friendly
• Small & Low Profile Cases
• 3x Reflow 260°C Compatible
• Consumer Applications
LEAD-FREE COMPATIBLE
COMPONENT
43
TLJ Series
Tantalum Solid Electrolytic Chip Capacitors
Consumer Series
Capacitance Rated Voltage DC to 40°C / 0.5DC to 85°C / 0.2DC to 125°C
Cap. (µF) Code 2.5V (e) 4V (G) 6.3V (J) 10V (A) 16V (C)
3.3 335
4.7 475 Q
6.8 685 R
10 106 Q*/R(3000) P
15 156 Q* Q*/RP/S
22 226 Q*/R(3500) PA/T(600)
33 336 Q/R P/R(3000) ST
47 476 Q/R P/R(3000) SA/T(600) B
68 686 PSA/T* A/T B/W
100 107 SA(500) A(500,800)/T* TW
150 157 AA/T* TB(500)/W(200)
220 227 A/T T B*/W*
330 337 TB*/W* B
470 477 B*/W* B*
680 687
1000 108
CAPACITANCE AND RATED VOLTAGE, VR(VOLTAGE CODE) RANGE
(LETTER DENOTES CASE SIZE)
RATINGS & PART NUMBER REFERENCE
All technical data relates to an ambient temperature of +25°C.
Capacitance and DF are measured at 120Hz, 0.5 RMS with
DC bias of 2.2 volts. DCL is measured at rated voltage after
5 minutes. TLJ series is MSL level 3 device.
ESR allowed to move up to 1.25 times catalog limit post
mounting.
DCL allowed to move up to 2.00 times catalog limit post
mounting.
NOTE: AVX reserves the right to supply a higher voltage
rating in the same case size, to the same reliability
standards.
Red - Developmental Ratings - subject to change
Violet - Please Contact Manufacturer
Available Ratings, (ESR ratings in mOhms in brackets)
# insert R for 7" reel or S for 13" reel
Rated Maximum DCL ESR
100kHz Ripple Current (mA) 100kHz Ripple Voltage (mV)
AVX Case Capacitance Voltage Surge (µA) Max. (mΩ)
Part No. Size (µF) (V) Current (A)* Max. @100kHz 25ºC 85ºC 125ºC 25ºC 85ºC 125ºC
4 Volt @ 40ºC (2 Volt @ 85ºC, 0.8 Volt @ 125°C)
TLJR476M004#3000 R 47 4 0.6 1.9 3000 135 122 54 406 366 162
TLJA107M004#0500 A 100 4 2.1 4.0 500 387 349 155 194 174 77
6.3 Volt @ 40ºC (3.15 Volt @ 85ºC, 1.26 Volt @ 125°C)
TLJR226M006#3500 R 22 6.3 0.8 1.3 3500 125 113 50 439 395 175
TLJR336M006#3000 R 33 6.3 0.9 2.0 3000 135 122 54 406 366 162
TLJA107M006#0500 A 100 6.3 3.3 6.0 500 387 349 155 194 174 77
TLJA107M006#0800 A 100 6.3 2.5 6.0 800 306 276 122 245 220 98
10 Volt @ 40ºC (5 Volt @ 85ºC, 2 Volt @ 125°C)
TLJR106M010#3000 R 10 10 1.4 1.0 3000 135 122 54 406 366 162
TLJT476M010#0600 T 47 10 4.8 4.7 600 365 329 146 219 197 88
TLJB157M010#0500 B 150 10 5.3 15.0 500 412 371 165 206 186 82
TLJW157M010#0200 W 150 10 7.7 15.0 200 671 604 268 134 121 54
16 Volt @ 40ºC (8 Volt @ 85ºC, 3.2 Volt @ 125°C)
TLJT226M016#0600 T 22 16 7.6 3.5 600 365 329 146 219 197 88
Voltage vs Temperature Rating
100% 100%
80%
67%
50%
33%
20%
80%
0%
20%
40%
60%
80%
100%
120%
-55°C 0°C 40°C 60°C 85°C 105°C 125°C
rated range
recommended derating
44
TRJ Series
Professional Tantalum Chip Capacitor (also available as COTS-Plus option)
HOW TO ORDER
The TRJ surface mount series employs
established Tantalum technology together
with new process improvements and
advanced manufacturing techniques. This
robust series enables extension of the
guaranteed 0.5% reliability level to 1000
hours at rated voltage, rated temperature
and 0.1Ω/volt circuit impedance. The
moisture penetration barrier, thicker external
dielectric layer and modified manganising
process make the capacitor more robust
against higher thermo-mechanical stresses
during assembly process (“lead-free”
soldering) and also more robust against
more severe working conditions in
Automotive, Medical, Aerospace, Military
and other applications. The temperature
range is -55°C to 125°C and voltage range
is 6.3V to 35V.
These components do not contain any
lead either in the internal structure or in the
termination plating. They are compatible
with all SnPb and “lead-free” solders and
are qualified for higher reflow temperature
necessary for new lead-free assembly
process.
Technical Data: All technical data relate to an ambient temperature of +25°C
Capacitance Range: 0.1µF to 470µF
Capacitance Tolerance: ±10%; ±20%
Leakage Current DCL: 0.0075CV
Rated Voltage (VR)+85°C: 6.3 10 16 20 25 35 50
Category Voltage (VC) +125°C: 4 7 10 13 17 23 33
Surge Voltage (VS) +85°C: 8 13 20 26 32 46 65
Surge Voltage (VS) +125°C: 5 8 13 16 20 28 40
Temperature Range: -55°C to +125°C
Reliability: 0.5% per 1000 hours at 85°C, VRwith 0.1Ω/V series impedance,
60% confidence level
Termination Plating: Sn Plating (standard), Gold and SnPb Plating upon request
Meets requirements of AEC-Q200
TECHNICAL SPECIFICATIONS
CASE DIMENSIONS: millimeters (inches)
TRJ
Type
B
Case Size
See table
above
105
Capacitor Code
pF code: 1st two
digits represent
significant figures,
3rd digit represents
multiplier (number of
zeros to follow)
*
Tolerance
K=±10%
M=±20%
035
Rated DC Voltage
006 = 6.3V
010 = 10V
016 = 16V
020 = 20V
025 = 25V
035 = 35V
050 = 50V
R
Packaging/
Termination Plating
R = 7" T/R
Lead Free
S = 13" T/R
Lead Free
A = Gold Plating
7" Reel
B = Gold Plating
13" Reel
RJ
Additional
characters may be
added for special
requirements
Code EIA L±0.20 (0.008) W+0.20 (0.008) H+0.20 (0.008) W1±0.20 (0.008) A+0.30 (0.012) S Min.
Code -0.10 (0.004) -0.10 (0.004) -0.20 (0.008)
A3216-18 3.20 (0.126) 1.60 (0.063) 1.60 (0.063) 1.20 (0.047) 0.80 (0.031) 1.10 (0.043)
B3528-21 3.50 (0.138) 2.80 (0.110) 1.90 (0.075) 2.20 (0.087) 0.80 (0.031) 1.40 (0.055)
C6032-28 6.00 (0.236) 3.20 (0.126) 2.60 (0.102) 2.20 (0.087) 1.30 (0.051) 2.90 (0.114)
D7343-31 7.30 (0.287) 4.30 (0.169) 2.90 (0.114) 2.40 (0.094) 1.30 (0.051) 4.40 (0.173)
E7343-43 7.30 (0.287) 4.30 (0.169) 4.10 (0.162) 2.40 (0.094) 1.30 (0.051) 4.40 (0.173)
W1 dimension applies to the termination width for A dimensional area only.
For part marking see page 121
45
Capacitance Rated Voltage DC (VR) to 85°C
µF Code 6.3V (J) 10V (A) 16V (C) 20V (D) 25V (E) 35V (V) 50V (T)
0.10 104 A
0.15 154 A
0.22 224 A
0.33 334 A
0.47 474 AA
0.68 684 AA
1.0 105 A A A/B
1.5 155 A A A/B
2.2 225 A A A/B B
3.3 335 A A/B B B/C D
4.7 475 A A/B A/B B B/C D
6.8 685 A A/B B B/C C D
10 106 A A/B B B/C C C/D E
15 156 A/B A/B B B/C C/D C/D
22 226 A/B B C C/D C/D D
33 336 B B/C C C/D D D/E
47 476 B/C C C/D D D/E
68 686 C C D D/E
100 107 C D D/E D/E
150 157 C/D D/E E
220 227 D D/E
330 337 E E
470 477 E
TRJ Series
Professional Tantalum Chip Capacitor (also available as COTS-Plus option)
CAPACITANCE AND RATED VOLTAGE, VR(VOLTAGE CODE) RANGE
LETTER DENOTES CASE SIZE
Note: Voltage ratings are minimum values. AVX reserves the right to supply
higher ratings in the same reliability standards.
Developmental Ratings - subject to change
HOW TO ORDER – FOR COTS-Plus PRODUCTS
TRJ
Type
B
Case Size
105
Capacitance Code
pF code: 1st two
digits represent
significant figures
3rd digit represents
multiplier (number of
zeros to follow)
M
Tolerance
K=±10%
M=±20%
035
Rated DC Voltage
006=6.3Vdc
010=10Vdc
016=16Vdc
020=20Vdc
025=25Vdc
035=35Vdc
E
Packaging/
Termination Plating
E = non modular
quantity tin/lead
termination finish
C000
Additional
characters may be
added for special
requirements
(see below)
First digit
C = for COTS-Plus
Second digit
0 (zero) = for no surge requirement
S = for 10 cycles, 25°C surge
T = for 10 cycles, -55 and 85°C surge
Third digit
0 (zero) = standard ESR
L = for low ESR
Fourth digit
0 (zero) = standard M/L level reliability
B = for Weibull grade “B”
C = for Weibull grade “C”
Z = for non ER
Suffix details
46
Case Capacitance Volts ESR Max. (mΩ) @ 100 kHz
B336 600
C100 6 150
D220 6 100
E330 6 100
E470 6 50
B22 10 700
D100 10 100
D150 10 150
B1516 800
C2216 375
C4716 350
D4716 150
D100 16 125
D3320 200
E6820 150
C1025 500
D2225 200
C4.7 35 600
D1035 300
D2235 400
TRJ Series
Professional Tantalum Chip Capacitor
RATINGS & PART NUMBER REFERENCE
AVX Case Capacitance DCL DF ESR
Part No. Size (µF) (µA) % Max. (Ω)
Max. Max. @ 100 kHz
Voltage Rating 6.3 v @ 85°C (4 v @ 125°C)
TRJA106*006# A 10 0.45 6 2.2
TRJA156*006# A 15 0.68 6 2.0
TRJB156*006# B 15 0.68 6 2.0
TRJB226*006# B 22 0.99 6 1.9
TRJB336*006# B 33 1.5 6 1.7
TRJB476*006# B 47 2.1 6 1.6
TRJC476*006# C 47 2.1 6 0.5
TRJC686*006# C 68 3.1 6 0.5
TRJC107*006# C 100 4.5 6 0.4
TRJD157*006# D 150 6.8 6 0.4
TRJD227*006# D 220 9.9 8 0.4
TRJE337*006# E 330 14 8 0.3
Voltage Rating 10 v @ 85°C (7 v @ 125°C)
TRJA475*010# A 4.7 0.35 6 3.2
TRJA685*010# A 6.8 0.51 6 2.6
TRJA106*010# A 10 0.75 6 2.2
TRJB106*010# B 10 0.75 6 2.2
TRJB156*010# B 15 1.1 6 2.0
TRJB226*010# B 22 1.7 6 1.9
TRJC336*010# C 33 2.5 6 0.6
TRJC476*010# C 47 3.5 6 0.5
TRJC686*010# C 68 5.1 6 0.5
TRJD107*010# D 100 7.5 6 0.4
TRJD157*010# D 150 11 8 0.4
TRJE157*010# E 150 11 8 0.4
TRJE227*010# E 220 17 8 0.4
Voltage Rating 16 v @ 85°C (10 v @ 125°C)
TRJA225*016# A 2.2 0.30 6 4.5
TRJA335*016# A 3.3 0.40 6 3.7
TRJA475*016# A 4.7 0.56 6 3.2
TRJB475*016# B 4.7 0.56 6 3.2
TRJB685*016# B 6.8 0.82 6 2.6
TRJB106*016# B 10 1.2 6 2.2
TRJB156*016# B 15 1.8 6 2.0
TRJC226*016# C 22 2.6 6 0.7
TRJC336*016# C 33 4.0 6 0.6
TRJC476*016# C 47 5.6 6 0.5
TRJD476*016# D 47 5.6 6 0.5
TRJD686*016# D 68 8.2 6 0.5
TRJD107*016# D 100 12 6 0.4
TRJE107*016# E 100 12 6 0.4
AVX Case Capacitance DCL DF ESR
Part No. Size (µF) (µA) % Max. (Ω)
Max. Max. @ 100 kHz
Voltage Rating 20 v @ 85°C (13 v @ 125°C)
TRJA105*020# A 1 0.30 4 6.6
TRJA155*020# A 1.5 0.30 6 5.5
TRJA225*020# A 2.2 0.33 6 4.5
TRJA335*020# A 3.3 0.50 6 3.7
TRJB335*020# B 3.3 0.50 6 3.7
TRJB475*020# B 4.7 0.71 6 3.2
TRJB685*020# B 6.8 1.0 6 2.6
TRJB106*020# B 10 1.5 6 2.2
TRJC106*020# C 10 1.5 6 0.8
TRJC156*020# C 15 2.3 6 0.7
TRJC226*020# C 22 3.3 6 0.7
TRJD226*020# D 22 3.3 6 0.7
TRJC336*020# C 33 5.0 6 0.6
TRJD336*020# D 33 5.0 6 0.6
TRJD476*020# D 47 7.1 6 0.5
TRJD686*020# D 68 10 6 0.5
TRJE686*020# E 68 10 6 0.5
Voltage Rating 25 v @ 85°C (17 v @ 125°C)
TRJA474*025# A 0.47 0.30 4 9.5
TRJA684*025# A 0.68 0.30 4 8.0
TRJA105*025# A 1 0.30 4 6.6
TRJA155*025# A 1.5 0.30 6 5.5
TRJB225*025# B 2.2 0.41 6 4.5
TRJB335*025# B 3.3 0.62 6 3.7
TRJB475*025# B 4.7 0.88 6 3.2
TRJC685*025# C 6.8 1.3 6 1.1
TRJC106*025# C 10 1.9 6 0.8
TRJC156*025# C 15 2.8 6 0.7
TRJD156*025# D 15 2.8 6 0.7
TRJD226*025# D 22 4.1 6 0.7
TRJD336*025# D 33 6.2 6 0.6
TRJE476*025# E 47 8.8 6 0.5
Voltage Rating 35 v @ 85°C (23 v @ 125°C)
TRJA104*035# A 0.1 0.30 4 20
TRJA154*035# A 0.15 0.30 4 16
TRJA224*035# A 0.22 0.30 4 14
TRJA334*035# A 0.33 0.30 4 11
TRJA474*035# A 0.47 0.30 4 9.5
TRJA684*035# A 0.68 0.30 4 8.0
TRJA105*035# A 1 0.30 4 6.6
TRJB105*035# B 1 0.30 4 3.4
TRJB155*035# B 1.5 0.39 6 5.5
TRJB225*035# B 2.2 0.58 6 4.5
TRJB335*035# B 3.3 0.87 6 3.7
TRJC335*035# C 3.3 0.87 6 1.8
TRJC475*035# C 4.7 1.2 6 1.4
TRJC685*035# C 6.8 1.8 6 1.1
TRJC106*035# C 10 2.6 6 0.8
TRJD106*035# D 10 2.6 6 0.8
TRJD156*035# D 15 3.9 6 0.7
TRJD226*035# D 22 5.8 6 0.7
TRJE336*035# E 33 8.7 6 0.6
Voltage Rating 50 v @ 85°C (33 v @ 125°C)
TRJD335*050# D 3.3 1.20 4.5 1.1
TRJD475*050# D 4.7 1.80 4.5 0.9
TRJD685*050# D 6.8 2.60 4.5 0.7
TRJE106*050# E 10 3.80 4.5 0.7
All technical data relates to an ambient temperature of +25°C. Capacitance and
DF are measured at 120Hz, 0.5V RMS with a maximum DC bias of 2.2 volts.
DCL is measured at rated voltage after 5 minutes.
* Insert K for ±10% and M for ±20%
# Termination finished and packaging reel size
NOTE: AVX reserves the right to supply higher specification parts in the
same case size, to the same reliability standards.
COTS-Plus Low ESR options available for:
47
THJ Series
High Temperature Tantalum Chip Capacitor
The THJ surface mount series combines
high temperature operation and higher
basic reliability for optimal performance
in typical automotive applications. The
operational temperature is up to +150°C
with derating voltage. The level of reliability
of this tantalum product is 0.5% / 1000
hours at rated voltage, rated tempera-
ture and 0.1Ω/volt circuit impedance.
The capacitors are produced in black
encapsulation with white polarity mark-
ing. The THJ series encompasses the 4
case sizes with dimensions identical to
TAJ standard series. The voltage range
available today is 6.3V through to 35V.
CASE DIMENSIONS: millimeters (inches)
Code EIA L±0.20 (0.008) W+0.20 (0.008) H±0.20 (0.008) W1A+0.30 (0.012) S Min.
Code -0.10 (0.004) -0.10 (0.004) ±0.20 (0.008) -0.20 (0.008)
A3216-18 3.20 (0.126) 1.60 (0.063) 1.60 (0.063) 1.20 (0.047) 0.80 (0.031) 1.10 (0.043)
B3528-21 3.50 (0.138) 2.80 (0.110) 1.90 (0.075) 2.20 (0.087) 0.80 (0.031) 1.40 (0.055)
C6032-28 6.00 (0.236) 3.20 (0.126) 2.60 (0.102) 2.20 (0.087) 1.30 (0.051) 2.90 (0.114)
D7343-31 7.30 (0.287) 4.30 (0.169) 2.90 (0.114) 2.40 (0.094) 1.30 (0.051) 4.40 (0.173)
E7343-43 7.30 (0.287) 4.30 (0.169) 4.10 (0.162) 2.40 (0.094) 1.30 (0.051) 4.40 (0.173)
W1dimension applies to the termination width for A dimensional area only.
Technical Data: All technical data relate to an ambient temperature of +25°C
Capacitance Range: 0.1µF to 150µF
Capacitance Tolerance: ±10%; ±20%
Rated Voltage (VR)+85°C: 6.3 10 16 20 25 35 50
Category Voltage (VC)+125°C 4 7 10 13 17 23 33
+150°C 3 5 8 10 12 17 25
Surge Voltage (Vs)+85°C 8 13 20 26 32 46 65
+125°C 5 8 13 16 20 28 40
+150°C 4 6 10 12 15 21 30
Temperature Range: Up to 150°C with 50% derating (up to 170°C, 15 hours at 0v)
Reliability: 0.5% per 1000 hours at 85°C, VRwith 0.1Ω/V series impedance,
60% confidence level, 3.5 Fits at 40°C, 0.5VR
Termination Finish: Sn Plating (standard), Gold Plating available on request
Meets requirements of AEC-Q200
TECHNICAL SPECIFICATIONS
For part marking see page 121
HOW TO ORDER
THJ
Type
B
Case Size
See table
above
105
Capacitance Code
pF code: 1st two
digits represent
significant figures
3rd digit represents
multiplier (number of
zeros to follow)
*
Tolerance
K=±10%
M=±20%
035
Rated DC Voltage
006=6.3Vdc
010=10Vdc
016=16Vdc
020=20Vdc
025=25Vdc
035=35Vdc
050=50Vdc
R
Packaging
R = 7" T/R
Lead Free
S = 13" T/R
Lead Free
A = Gold Plating
7" Reel
B = Gold Plating
13" Reel
JN
Additional
characters may be
added for special
requirements
48
THJ Series
High Temperature Tantalum Chip Capacitor
Capacitance Rated voltage (VR) to 85°C (Voltage Code)
µF Code 6.3V (J) 10V (A) 16V (C) 20V (D) 25V (E) 35V (V) 50V (T)
0.10 104 A
0.15 154 A
0.22 224 A
0.33 334 A
0.47 474 A B
0.68 684 A B
1.0 105 A A/B
1.5 155 A C
2.2 225 A B C
3.3 335 A A B C
4.7 475 A B C D
6.8 685 A/B C D
10 106 B C D
15 156 B C D
22 226 B B C D D
33 336 B C C D D
47 476 C D
68 686 C D
100 107 D
150 157 D
220 227
330 337
470 477
680 687
1000 108
CAPACITANCE AND VOLTAGE RANGE (LETTER DENOTES CASE SIZE)
49
THJ Series
High Temperature Tantalum Chip Capacitor
RATINGS & PART NUMBER REFERENCE
AVX Case Capacitance Rated DCL DF ESR
Part No. Size (µF) Voltage (µA) % Max. (Ω)
(V) Max. Max.
@ 100 kHz
Voltage Rating 6.3 v @ 85°C (3 v @ 150°C) / J
THJA475*006#JN A 4.7 6.3 0.5 6 6
THJB156*006#JN B 15 6.3 0.9 6 2.5
THJB226*006#JN B 22 6.3 1.4 6 2.5
THJB336*006#JN B 33 6.3 1.9 6 1.7
THJC476*006#JN C 47 6.3 3.0 6 1.6
THJC686*006#JN C 68 6.3 4.3 6 1.5
THJD157*006#JN D 150 6.3 9.5 6 0.9
Voltage Rating 10 v @ 85°C (5 v @ 150°C) / A
THJA335*010#JN A 3.3 10 0.5 6 5.5
THJB226*010#JN B 22 10 2.2 6 1.9
THJC336*010#JN C 33 10 3.3 6 1.6
THJD107*010#JN D 100 10 10 6 0.9
Voltage Rating 16 v @ 85°C (8 v @ 150°C) / C
THJA225*016#JN A 2.2 16 0.5 6 6.5
THJB475*016#JN B 4.7 16 0.8 6 3.5
THJA335*016#JN A 3.3 16 0.5 6 3.7
THJA685*016#JN A 6.8 16 1.1 6 2.6
THJB685*016#JN B 6.8 16 1.1 6 2.5
THJB106*016#JN B 10 16 1.6 6 2.8
THJC226*016#JN C 22 16 3.5 6 1.6
THJC336*016#JN C 33 16 5.3 6 0.6
THJD476*016#JN D 47 16 7.5 6 0.9
THJD686*016#JN D 68 16 10.9 6 0.9
Voltage Rating 20 v @ 85°C (10 v @ 150°C) / D
THJA155*020#JN A 1.5 20 0.5 6 6.5
THJB335*020#JN B 3.3 20 0.7 6 3
THJC156*020#JN C 15 20 3.0 6 1.7
THJD336*020#JN D 33 20 6.6 6 0.9
AVX Case Capacitance Rated DCL DF ESR
Part No. Size (µF) Voltage (µA) % Max. (Ω)
(V) Max. Max.
@ 100 kHz
Voltage Rating 25 v @ 85°C (12 v @ 150°C) / E
THJA474*025#JN A 0.47 25 0.5 4 14
THJA684*025#JN A 0.68 25 0.5 4 10
THJA105*025#JN A 1.0 25 0.5 3 5.2
THJB225*025#JN B 2.2 25 0.6 6 4.5
THJC685*025#JN C 6.8 25 1.7 6 2
THJC106*025#JN C 10 25 2.5 6 1.8
THJD226*025#JN D 22 25 5.5 6 0.9
Voltage Rating 35 v @ 85°C (17 v @ 150°C) / V
THJA104*035#JN A 0.1 35 0.5 4 24
THJA154*035#JN A 0.15 35 0.5 4 21
THJA224*035#JN A 0.22 35 0.5 4 18
THJA334*035#JN A 0.33 35 0.5 4 15
THJB474*035#JN B 0.47 35 0.5 4 10
THJB684*035#JN B 0.68 35 0.5 4 8
THJA105*035#JN A 1.0 35 0.5 4 6.6
THJB105*035#JN B 1.0 35 0.5 4 6.5
THJC155*035#JN C 1.5 35 0.5 6 4.5
THJC225*035#JN C 2.2 35 0.8 6 3.5
THJC335*035#JN C 3.3 35 1.2 6 2.5
THJC475*035#JN C 4.7 35 1.6 6 2.2
THJD685*035#JN D 6.8 35 2.4 6 1.3
THJD106*035#JN D 10 35 3.5 6 1
THJD156*035#JN D 15 35 5.3 6 0.9
THJD226*035#JN D 22 35 7.7 6 0.9
THJD336*035#JN D 33 35 8.3 6 0.5
Voltage Rating 50 v @ 85°C (25 v @ 150°C) / T
THJD475*050#JN D 4.7 50 2.4 6 1.2
All technical data relates to an ambient temperature of +25°C. Capacitance and
DF are measured at 120Hz, 0.5V RMS with a maximum DC bias of 2.2 volts.
DCL is measured at rated voltage after 5 minutes.
* Insert K for ±10% and M for ±20%
NOTE: AVX reserves the right to supply higher specification parts in the same
case size, to the same reliability standards.
# Standard Plating – Insert R for 7" reel and S for 13" reel
# Gold Plating – Insert A for 7" reel and B for 13" reel
For parametric information on development codes, please contact your
local AVX sales office.
50
%
%
%
TMC Series
Established Reliability TACmicrochip™
CASE DIMENSIONS: millimeters (inches)
Termination Minimum Average
Code EIA EIA Length (L) Width (W) Height (H) Spacing(S) Te rmination Mass
Code Metric Length (Lt)
K0402 1005-07
1.00 0.50 0.50 0.40 min. 0.10 (0.004) 2.0mg
(0.039 ) (0.020 ) (0.020 )
L0603 1608-10 1.60 0.85 0.85 0.65 min. 0.15 (0.006) 8.6mg
(0.063 ) (0.033 ) (0.033 )
R0805 2012-15
2.00 1.35 1.35
0.85 min. 0.15 (0.006) 29.9mg
(0.079 ) (0.053 ) (0.053 )
A1206 3216-18 3.20±0.20 1.60±0.20 1.60±0.20 2.00 min. 0.15 (0.006) 44.6mg
(0.126±0.008) (0.063±0.008) (0.063±0.008)
T3528 3528-12 3.50 2.80 1.20 max. 2.30 min. 0.15 (0.006) 65mg
(0.138 ) (0.110 ) (0.047 max.)
L
SLt W
H
POLARITY BAND NOT TO
EXCEED CENTER LINE
+0.20
-0.00
+0.20
-0.00
+0.20
-0.00
+0.008
-0.000
+0.20
-0.00
+0.008
-0.000
+0.20
-0.00
+0.008
-0.000
+0.20
-0.20
+0.008
-0.008
+0.20
-0.10
+0.008
-0.004
+0.15
-0.00
+0.006
-0.000
+0.15
-0.00
+0.006
-0.000
+0.15
-0.00
+0.006
-0.000
+0.008
-0.000
+0.008
-0.000
+0.15
-0.00
+0.006
-0.000
• Weibull graded
• Reliability 0.1% / k hrs
• Low leakage
• Conformance testing
(Lot by Lot)
• Extended traceability
• Approved for use in life support
and implantable medical devices
KEY FEATURES
TMC
Type
TACmicrochip™
R
Case Size
0402=K
0603=L
0805=R
1206=A
106
Capacitance Code
pF code: 1st two digits
represent significant figures,
3rd digit represents multiplier
(number of zeros to follow)
M
Tolerance
K=±10%
M=±20%
010
Rated DC Voltage
002=2Vdc
003=3Vdc
004=4Vdc
006=6.3Vdc
010=10Vdc
016=16Vdc
020=20Vdc
HS
Termination and
Special
Requirements
HS = Tin Termination
HR = Gold Termination
Alternative characters
may be used for special
requirements.
HOW TO ORDER
E
Packaging
E = Non Modular qty.
supplied on
7" reel
Technical Data: All technical data relate to an ambient temperature of +25°C
Capacitance Range: 0.47µF to 68µF
Capacitance Tolerance: ±10%; ±20%
Leakage Current DCL: 0.005CV or 0.2µA whichever is the greater
Rated Voltage (VR)+85°C: 3 4 6.3 10 16 20
Category Voltage (VC)+125°C: 2 2.7 4 7 10 13
Surge Voltage (VS)+85°C: 3.9 5.2 8 13 20 26
Surge Voltage (VS)+125°C: 2.6 3.2 5 8 12 16
Temperature Range: -55°C to +125°C
Reliability: HRC5000, Weibull B grade, 0.1% per 1,000 hours
Termination Finish: Nickel and Tin Plating (standard),
Nickel and Gold Plating option available upon request
TECHNICAL SPECIFICATIONS
ENVIRONMENTAL FRIENDLY
COMPONENT
51
Capacitance Voltage Rating DC (VR) at 85°C
Cap. (µF) Code 2.0V 3.0V 4.0V 6.3V 10V 16V 20V
0.33 334
0.47 474 /L
0.68 684 K/L
1.0 105 KK/L L
1.5 155 L
2.2 225 KL
3.3 335 L/R
4.7 475 L L/R R
6.8 685 R R
10 106 R R R R
15 156 R R R
22 226 R
33 336 R R
47 476 A T
68 686 A
100 107
150 157
220 227
TMC Series
Established Reliability TACmicrochip™
ESTABLISHED RELIABILITY RANGE (EIA Sizes) (LETTER DENOTES CASE SIZE)
Developmental Ratings - subject to change
K
R
L
L
L
NOTE: Encircled letters designate codes where
qualification is pending, contact local
sales office for current status.
52
The TAZ part has fully molded, compliant
leadframe construction designed for
use in applications utilizing solder
(Reflow, Wave or Vapor Phase),
conductive adhesive or thermal com-
pression bonding techniques. Each
chip is marked with polarity, capaci-
tance code and rated voltage.
The series comprises ten case sizes
(see dimensional chart below) with
the maximum size V case giving
capacitance values to 470 µF. The C
case, with its non-standard aspect
ratio, is retained as a QPL (Qualified
Product List) only special.
S
L
A
H
W1
W
MARKING
(White marking on black body)
Case sizes A through E share a common (0.050" nom) height profile, compatible with PCMCIA type II applications. These
allow downsizing in all portable applications, ranging from sub-miniature hard-disc drive (HDD)/computer to portable com-
munications/GPS systems. The F case at 0.070" nom offers the versatility of a low profile design, while allowing capaci-
tance ratings to 100 µF for low voltage filtering applications.
Cases G and H offer lower profile and greater volumetric efficiency than their nearest EIA sized counterparts
(ref. CWR11). These are especially suited to power supply applications. The regular configuration allows for banking
(brickwalling) applications where maximum capacitance with minimal ESR and inductance are required in a limited
board space.
Polarity Stripe (+)
Capacitance Code
Rated Voltage
TAZ Series
Including CWR09, CWR19, CWR29 and COTS-Plus
TAZ & CWR09, CWR19, CWR29 CASE DIMENSIONS:
millimeters (inches)
Case Length (L) Width (W) Height (H) Term. Width (W1)Te rm. Length (A) S min
Code ±0.38 (0.015) ±0.38 (0.015) ±0.38 (0.015) ±0.13 (0.005)
A2.54 (0.100) 1.27 (0.050) 1.27 (0.050) 1.27±0.13 0.76 (0.030) 0.38 (0.015)
(0.050±0.005)
B3.81 (0.150) 1.27 (0.050) 1.27 (0.050) 1.27±0.13 0.76 (0.030) 1.65 (0.065)
(0.050±0.005)
C* 5.08 (0.200) 1.27 (0.050) 1.27 (0.050) 1.27±0.13 0.76 (0.030) 2.92 (0.115)
(0.050±0.005)
D3.81 (0.150) 2.54 (0.100) 1.27 (0.050) 2.41+0.13/-0.25 0.76 (0.030) 1.65 (0.065)
(0.095+0.005/-0.010)
E5.08 (0.200) 2.54 (0.100) 1.27 (0.050) 2.41+0.13/-0.25 0.76 (0.030) 2.92 (0.115)
(0.095+0.005/-0.010)
F5.59 (0.220) 3.43 (0.135) 1.78 (0.070) 3.30±0.13 0.76 (0.030) 3.43 (0.135)
(0.130±0.005)
G6.73 (0.265) 2.79 (0.110) 2.79 (0.110) 2.67±0.13 1.27 (0.050) 3.56 (0.140)
(0.105±0.005)
H7.24 (0.285) 3.81 (0.150) 2.79 (0.110) 3.68+0.13/-0.51 1.27 (0.050) 4.06 (0.160)
(0.145+0.005/-0.020)
X** 6.93 Max 5.41 Max 2.74 Max 3.05±0.13 1.19 (0.047) N/A
(0.273) (0.213) (0.108) (0.120±0.005)
* C case available in CWR09 series only (non standard)
** X case available in CWR19/CWR29 series only
Technical Data: Unless otherwise specified, all technical data relate to an ambient temperature of 25°C
Capacitance Range: 0.1 to 470 µF
Capacitance Tolerance: ±20%, ±10%, ±5%
Rated DC Voltage: (VR)85°C: 4 6 10 16 20 25 35 50
Category Voltage: (VC)125°C: 2.7 4 7 10 13 17 23 33
Surge Voltage: (VC)85°C: 5.2 8 13 20 26 33 46 65
125°C: 3.5 5 9 12 16 21 28 40
Operating Temperature Range: -55°C to +125°C
53
TAZ Series
CWR09
CWR09 J B 225 K B A \TR
Fully qualified to MIL-PRF-55365/4, this series represents
the most flexible of surface mount form factors, offering eight
case sizes (A through H). This series is fully interchangeable
with CWR06 conformal types, while offering the advantages
of molded body/compliant termination construction, polarity
and capacitance. The molded construction is compatible
with a wide range of SMT board assembly processes includ-
ing wave or reflow solder, conductive epoxy or compression
bonding techniques. The five smaller cases are characterized
by their low profile construction, with the A case being the
world’s smallest molded military tantalum. There are three
termination finishes available: fused solder plated (“K” per
MIL-PRF-55365), hot solder dipped (“C”) and gold plated
(“B”). In addition, the molding compound has been selected
to meet the requirements of UL94V-0 and outgassing
requirements of NASA SP-R-0022A.
CWR09 - MIL-PRF-55365/4
PART NUMBERING SYSTEM
Style Voltage
Code
Termination
Finish
Capacitance
Code Packaging
(see page 120)
Surge Test
Option
Reliability
Grade
Capacitance
Tolerance
ORIGINAL RANGE - TAZ PROFESSIONAL AND CWR09 MILITARY (MIL PRF-55365/4)
Capacitance and Votage Range (letter denotes case size)
Capacitance Rated voltage DC (VR) at 85ºC
µF Code 4V 6V 10V 15V 20V 25V 35V 50V
0.1 104 A
0.15 154 A
0.22 224 AB
0.33 334 AB
0.47 474 A B C
0.68 684 A B B C D
1.0 105 A B C D E
1.5 155 A B C D E F
2.2 225 A B C D E F
3.3 335 B C D E F G
4.7 475 B C D E F G H
6.8 685 C D E F G H
10 106 D E F G
15 156 E F G H
22 226 F G H
33 336 F G H
47 476 G H
68 686 G H
100 107 H
NOTE: TAZ Standard Range ratings are also available as CWR09 Military parts, see page 52.
TAZ Series
CWR09
54
DC Leakage (max) Dissipation Factor (max)
QPL Part Number DC rated Cap ESR (max) Case
AVX Part Number (for reference only) voltage (nom) +25°C +85°C +125°C +25°C +85/125°C -55°C 100 kHz Size
(85°C) µF (µA) (µA) (µA) (%) (%) (%) +25°C
(volts) (Ohms)
TAZA225*004C#@0^++ CWR09C^225*@+42.2 1.0 10 12 6 8 8 8.0 A
TAZB475*004C#@0^++ CWR09C^475*@+44.7 1.0 10 12 6 8 8 8.0 B
TAZC685*004C#@0^++ CWR09C^685*@+46.8 1.0 10 12 6 8 8 5.5 C
TAZD106*004C#@0^++ CWR09C^106*@+410.0 1.0 10 12 8 8 10 4.0 D
TAZE156*004C#@0^++ CWR09C^156*@+415.0 1.0 10 12 8 10 12 3.5 E
TAZF336*004C#@0^++ CWR09C^336*@+433.0 2.0 20 24 8 10 12 2.2 F
TAZG686*004C#@0^++ CWR09C^686*@+468.0 3.0 30 36 10 12 12 1.1 G
TAZH107*004C#@0^++ CWR09C^107*@+4100.0 4.0 40 48 10 12 12 0.9 H
TAZA155*006C#@0^++ CWR09D^155*@+61.5 1.0 10 12 6 8 8 8.0 A
TAZB335*006C#@0^++ CWR09D^335*@+63.3 1.0 10 12 6 8 8 8.0 B
TAZC475*006C#@0^++ CWR09D^475*@+64.7 1.0 10 12 6 8 8 5.5 C
TAZD685*006C#@0^++ CWR09D^685*@+66.8 1.0 10 12 6 8 8 4.5 D
TAZE106*006C#@0^++ CWR09D^106*@+610.0 1.0 10 12 8 10 12 3.5 E
TAZF226*006C#@0^++ CWR09D^226*@+622.0 2.0 20 24 8 10 12 2.2 F
TAZG476*006C#@0^++ CWR09D^476*@+647.0 3.0 30 36 10 12 12 1.1 G
TAZH686*006C#@0^++ CWR09D^686*@+668.0 4.0 40 48 10 12 12 0.9 H
TAZA105*010C#@0^++ CWR09F^105*@+10 1.0 1.0 10 12 6 8 8 10.0 A
TAZB225*010C#@0^++ CWR09F^225*@+10 2.2 1.0 10 12 6 8 8 8.0 B
TAZC335*010C#@0^++ CWR09F^335*@+10 3.3 1.0 10 12 6 8 8 5.5 C
TAZD475*010C#@0^++ CWR09F^475*@+10 4.7 1.0 10 12 6 8 8 4.5 D
TAZE685*010C#@0^++ CWR09F^685*@+10 6.8 1.0 10 12 6 8 8 3.5 E
TAZF156*010C#@0^++ CWR09F^156*@+10 15.0 2.0 20 24 8 8 10 2.5 F
TAZG336*010C#@0^++ CWR09F^336*@+10 33.0 3.0 30 36 10 12 12 1.1 G
TAZH476*010C#@0^++ CWR09F^476*@+10 47.0 5.0 50 60 10 12 12 0.9 H
TAZA684*015C#@0^++ CWR09H^684*@+15 0.68 1.0 10 12 6 8 8 12.0 A
TAZB155*015C#@0^++ CWR09H^155*@+15 1.5 1.0 10 12 6 8 8 8.0 B
TAZC225*015C#@0^++ CWR09H^225*@+15 2.2 1.0 10 12 6 8 8 5.5 C
TAZD335*015C#@0^++ CWR09H^335*@+15 3.3 1.0 10 12 6 8 8 5.0 D
TAZE475*015C#@0^++ CWR09H^475*@+15 4.7 1.0 10 12 6 8 8 4.0 E
TAZF106*015C#@0^++ CWR09H^106*@+15 10.0 2.0 20 24 6 8 8 2.5 F
TAZG226*015C#@0^++ CWR09H^226*@+15 22.0 4.0 40 48 6 8 8 1.1 G
TAZH336*015C#@0^++ CWR09H^336*@+15 33.0 5.0 50 60 8 8 10 0.9 H
TAZA474*020C#@0^++ CWR09J^474*@+20 0.47 1.0 10 12 8 10 10 14.0 A
TAZB684*020C#@0^++ CWR09J^684*@+20 0.68 1.0 10 12 6 8 8 10.0 B
TAZB105*020C#@0^++ CWR09J^105*@+20 1.0 1.0 10 12 6 8 8 12.0 B
TAZC155*020C#@0^++ CWR09J^155*@+20 1.5 1.0 10 12 6 8 8 6.0 C
TAZD225*020C#@0^++ CWR09J^225*@+20 2.2 1.0 10 12 6 8 8 5.0 D
TAZE335*020C#@0^++ CWR09J^335*@+20 3.3 1.0 10 12 6 8 8 4.0 E
TAZF685*020C#@0^++ CWR09J^685*@+20 6.8 2.0 20 24 6 8 8 2.4 F
TAZG156*020C#@0^++ CWR09J^156*@+20 15.0 3.0 30 36 6 8 8 1.1 G
TAZH226*020C#@0^++ CWR09J^226*@+20 22.0 4.0 40 48 6 8 8 0.9 H
Part Number Designations
Following the voltage code, C designates Standard, L designates Low ESR Ratings
CWR19, CWR29 DESIGNATIONS ARE INCLUDED FOR REFERENCE ONLY – USE TAZ P/N TO ORDER
Surface Mount Military
CWR09 - MIL-PRF-55365/4 and TAZ COTS-Plus
^ = Termination Finish:1# = Inspection Level: * = Tolerance: @ = Failure Rate Level: + = Surge Option:
= Packaging:
For TAZ p/n: S = Std. Conformance M = ±20% Weibull: B = 0.1%/1000 Hrs. For TAZ p/n: For TAZ p/n:
9 = Gold Plated L = Group A K = ±10% (90% C = 0.01%/1000 Hrs. 00 = None B = Bulk
8 = Hot Solder Dipped For CWR p/n: J = ±5% (Special conf.) 23 = 10 cycles, +25°C R = 7" T&R
0 = Solder Fused M = Military order only) Comm: Z = Non ER 24 = 10 cycles, -55°C & +85°C S = 13" T&R
For CWR p/n: Conformance per 45 = 10 cycles, -55°C & +85°C before Weibull For CWR p/n:
B = Gold Plated MIL-PRF-55365 For CWR p/n: Bulk = Standard
C = Hot Solder Dipped A = 10 cycles, +25°C \TR = 7" T&R
K = Solder Fused B = 10 cycles, -55°C & +85°C \TR13 = 13" T&R
C = 10 cycles, -55°C & +85°C before Weibull \W = Waffle
Z = None (required for CWR19 & CWR29 only)
55
DC Leakage (max) Dissipation Factor (max)
QPL Part Number DC rated Cap ESR (max) Case
AVX Part Number (for reference only) voltage (nom) +25°C +85°C +125°C +25°C +85/125°C -55°C 100 kHz Size
(85°C) µF (µA) (µA) (µA) (%) (%) (%) +25°C
(volts) (Ohms)
TAZA334*020C#@0^++ CWR09K^334*@+25 0.33 1.0 10 12 6 8 8 15.0 A
TAZB684*020C#@0^++ CWR09K^684*@+25 0.68 1.0 10 12 6 8 8 7.5 B
TAZC105*025C#@0^++ CWR09K^105*@+25 1.0 1.0 10 12 6 8 8 6.5 C
TAZD155*020C#@0^++ CWR09K^155*@+25 1.5 1.0 10 12 6 8 8 6.5 D
TAZE225*020C#@0^++ CWR09K^225*@+25 2.2 1.0 10 12 6 8 8 3.5 E
TAZF475*020C#@0^++ CWR09K^475*@+25 4.7 2.0 20 24 6 8 8 2.5 F
TAZG685*020C#@0^++ CWR09K^685*@+25 6.8 2.0 20 24 6 8 8 1.2 G
TAZG106*020C#@0^++ CWR09K^106*@+25 10.0 3.0 30 36 6 8 8 1.4 G
TAZH156*020C#@0^++ CWR09K^156*@+25 15.0 4.0 40 48 6 8 8 1.0 H
TAZA224*035C#@0^++ CWR09M^224*@+35 0.22 1.0 10 12 6 8 8 18.0 A
TAZB474*035C#@0^++ CWR09M^474*@+35 0.47 1.0 10 12 6 8 8 10.0 B
TAZC684*035C#@0^++ CWR09M^684*@+35 0.68 1.0 10 12 6 8 8 8.0 C
TAZD105*035C#@0^++ CWR09M^105*@+35 1.0 1.0 10 12 6 8 8 6.5 D
TAZE155*035C#@0^++ CWR09M^155*@+35 1.5 1.0 10 12 6 8 8 4.5 E
TAZF335*035C#@0^++ CWR09M^335*@+35 3.3 1.0 10 12 6 8 8 2.5 F
TAZG475*035C#@0^++ CWR09M^475*@+35 4.7 2.0 20 24 6 8 8 1.5 G
TAZH685*035C#@0^++ CWR09M^685*@+35 6.8 3.0 30 36 6 8 8 1.3 H
TAZA104*050C#@0^++ CWR09N^104*@+50 0.10 1.0 10 12 6 8 8 22.0 A
TAZA154*050C#@0^++ CWR09N^154*@+50 0.15 1.0 10 12 6 8 8 17.0 A
TAZB224*050C#@0^++ CWR09N^224*@+50 0.22 1.0 10 12 6 8 8 14.0 B
TAZB334*050C#@0^++ CWR09N^334*@+50 0.33 1.0 10 12 6 8 8 12.0 B
TAZC474*050C#@0^++ CWR09N^474*@+50 0.47 1.0 10 12 6 8 8 8.0 C
TAZD684*050C#@0^++ CWR09N^684*@+50 0.68 1.0 10 12 6 8 8 7.0 D
TAZE105*050C#@0^++ CWR09N^105*@+50 1.0 1.0 10 12 6 8 8 6.0 E
TAZF155*050C#@0^++ CWR09N^155*@+50 1.5 1.0 10 12 6 8 8 4.0 F
TAZF225*050C#@0^++ CWR09N^225*@+50 2.2 2.0 20 24 6 8 8 2.5 F
TAZG335*050C#@0^++ CWR09N^335*@+50 3.3 2.0 20 24 6 8 8 2.0 G
TAZH475*050C#@0^++ CWR09N^475*@+50 4.7 3.0 30 36 6 8 8 1.5 H
Surface Mount Military
CWR09 - MIL-PRF-55365/4 and TAZ COTS-Plus
Part Number Designations
Following the voltage code, C designates Standard, L designates Low ESR Ratings
CWR19, CWR29 DESIGNATIONS ARE INCLUDED FOR REFERENCE ONLY – USE TAZ P/N TO ORDER
^ = Termination Finish:1# = Inspection Level: * = Tolerance: @ = Failure Rate Level: + = Surge Option:
= Packaging:
For TAZ p/n: S = Std. Conformance M = ±20% Weibull: B = 0.1%/1000 Hrs. For TAZ p/n: For TAZ p/n:
9 = Gold Plated L = Group A K = ±10% (90% C = 0.01%/1000 Hrs. 00 = None B = Bulk
8 = Hot Solder Dipped For CWR p/n: J = ±5% (Special conf.) 23 = 10 cycles, +25°C R = 7" T&R
0 = Solder Fused M = Military order only) Comm: Z = Non ER 24 = 10 cycles, -55°C & +85°C S = 13" T&R
For CWR p/n: Conformance per 45 = 10 cycles, -55°C & +85°C before Weibull For CWR p/n:
B = Gold Plated MIL-PRF-55365 For CWR p/n: Bulk = Standard
C = Hot Solder Dipped A = 10 cycles, +25°C \TR = 7" T&R
K = Solder Fused B = 10 cycles, -55°C & +85°C \TR13 = 13" T&R
C = 10 cycles, -55°C & +85°C before Weibull \W = Waffle
Z = None (required for CWR19 & CWR29 only)
56
Surface Mount Military
CWR19
CWR19 J B 225 K B D A \TR
An extended range of capacitor ratings beyond CWR09 that
is fully qualified to MIL-PRF-55365/11, this series represents
the most flexible of surface mount form factors, offering nine
case sizes. The molded construction is compatible with a
wide range of SMT board assembly processes including
wave or reflow solder, conductive epoxy or compression
bonding techniques. The five smaller cases are characterized
by their low profile construction; with the A case being the
world’s smallest molded military tantalum. There are three
termination finishes available: fused solder plated (“K” per
MIL-PRF-55365), hot solder dipped (“C”) and gold plated
(“B”). In addition, the molding compound has been selected
to meet the requirements of UL94V-0 (Flame Retardancy)
and requirements of NASA SP-R-0022A (Outgassing).
CWR19 - MIL-PRF-55365/11
PART NUMBERING SYSTEM
Style Voltage
Code
Termination
Finish
Capacitance
Code Packaging
(see page 120)
Surge Test
Option
Z = None Required
Reliability
Grade
Case Size
Capacitance
Tolerance
EXTENDED RANGE - TAZ PROFESSIONAL AND CWR19 MILITARY (MIL PRF-55365/11)
Capacitance and Votage Range (letter denotes case size)
Capacitance Rated voltage DC (VR) at 85ºC (Voltage Code)
µF Code 4V(C) 6.3V(D) 10V(F) 15V(H) 20V(J) 25V(K) 35V(M) 50V(N)
0.33 334 A
0.47 474 AC
0.68 684 A C
1.0 105 A A B/C
1.5 155 A B/C
2.2 225 A A/C B D
3.3 335 A A A/C B D E
4.7 475 A A/C B/C B/C/D E
6.8 685 A/C B B/C/D D/E E F G
10 106 B B B/C/D/E D/E E/F H
15 156 B B/D/E D/E E/F F G X
22 226 B/D D/E E F G G/H/X
33 336 D/E E F F/G H H/X
47 476 E F F/G G/H H/X
68 686 E F/G G G/H
100 107 F G G/H H
150 157 G G H/X
220 227 G H H
330 337 H H
57
Surface Mount Military
TAZ Professional and CWR19 - MIL-PRF-55365/11
Part Number Designations
Following the voltage code, C designates Standard, L designates Low ESR Ratings
CWR19, CWR29 DESIGNATIONS ARE INCLUDED FOR REFERENCE ONLY – USE TAZ P/N TO ORDER
DC Leakage (max) Dissipation Factor (max)
DC rated Cap ESR (max) Case
AVX Part Number QPL Part Number voltage (nom) +25°C +85°C +125°C +25°C +85/125°C -55°C 100 kHz Size
(85°C) µF (µA) (µA) (µA) (%) (%) (%) +25°C
(volts) (Ohms)
TAZA335*004C#@0^++ CWR19C-335
*@A+
43.3 1 10 12 6 8 8 12 A
TAZA475*004C#@0^++ CWR19C-475
*@A+
44.7 1 10 12 6 8 8 12 A
TAZA685*004C#@0^++ CWR19C-685
*@A+
46.8 1 10 12 6 8 8 12 A
TAZC685*004C#@0^++ CWR19C-685
*@C+
46.8 1 10 12 6 8 8 5.5 C
TAZB106*004C#@0^++ CWR19C-106
*@B+
410 1 10 12 8 10 10 8 B
TAZB156*004C#@0^++ CWR19C-156
*@B+
415 1 10 12 8 10 10 8 B
TAZB226*004C#@0^++ CWR19C-226
*@B+
422 1 10 12 8 10 10 8 B
TAZD226*004C#@0^++ CWR19C-226
*@D+
422 1 10 12 8 10 12 4 D
TAZD336*004C#@0^++ CWR19C-336
*@D+
433 2 20 24 8 10 12 4 D
TAZE336*004C#@0^++ CWR19C-336
*@E+
433 2 20 24 8 10 12 3 E
TAZE476*004C#@0^++ CWR19C-476
*@E+
447 2 20 24 8 10 12 3 E
TAZE686*004C#@0^++ CWR19C-686
*@E+
468 3 30 36 8 10 12 3 E
TAZF107*004C#@0^++ CWR19C-107
*@F+
4100 4 40 48 10 12 12 2 F
TAZG157*004C#@0^++ CWR19C-157
*@G+
4150 6 60 72 10 12 12 1 G
TAZG227*004C#@0^++ CWR19C-227
*@G+
4220 8 80 96 10 12 12 1 G
TAZH337*004C#@0^++ CWR19C-337
*@H+
4330 10 100 120 10 12 12 0.9 H
TAZA335*006C#@0^++ CWR19D-335
*@A+
63.3 1 10 12 6 8 8 12 A
TAZA475*006C#@0^++ CWR19D-475
*@A+
64.7 1 10 12 6 8 8 12 A
TAZC475*006C#@0^++ CWR19D-475
*@C+
64.7 1 10 12 6 8 8 5.5 C
TAZB685*006C#@0^++ CWR19D-685
*@B+
66.8 1 10 12 6 8 8 8 B
TAZB106*006C#@0^++ CWR19D-106
*@B+
610 1 10 12 6 8 8 8 B
TAZB156*006C#@0^++ CWR19D-156
*@B+
615 1 10 12 8 10 10 8 B
TAZD156*006C#@0^++ CWR19D-156
*@D+
615 1 10 12 8 10 12 5 D
TAZE156*006C#@0^++ CWR19D-156
*@E+
615 1 10 12 8 10 12 3 E
TAZD226*006C#@0^++ CWR19D-226
*@D+
622 1 10 12 6 8 8 5 D
TAZE226*006C#@0^++ CWR19D-226
*@E+
622 2 20 24 8 10 12 3.5 E
TAZE336*006C#@0^++ CWR19D-336
*@E+
633 2 20 24 6 8 8 3.5 E
TAZF476*006C#@0^++ CWR19D-476
*@F+
647 3 30 36 8 10 12 3.5 F
TAZF686*006C#@0^++ CWR19D-686
*@F+
668 4 40 48 10 12 12 1.5 F
TAZG686*006C#@0^++ CWR19D-686
*@G+
668 4 40 48 10 12 12 1 G
TAZG107*006C#@0^++ CWR19D-107
*@G+
6100 6 60 72 10 12 12 1.1 G
TAZG157*006C#@0^++ CWR19D-157
*@G+
6150 10 100 120 10 12 12 1.1 G
TAZH227*006C#@0^++ CWR19D-227
*@H+
6220 10 100 120 10 12 12 0.9 H
TAZH337*006C#@0^++ CWR19D-337
*@H+
6330 20 200 240 10 12 12 0.9 H
TAZA225*010C#@0^++ CWR19F-225
*@A+
10 2.2 1 10 12 6 8 8 12 A
TAZA335*010C#@0^++ CWR19F-335
*@A+
10 3.3 1 10 12 6 8 8 12 A
TAZC335*010C#@0^++ CWR19F-335
*@C+
10 3.3 1 10 12 6 8 8 5.5 C
TAZB475*010C#@0^++ CWR19F-475
*@B+
10 4.7 1 10 12 6 8 8 8 B
TAZC475*010C#@0^++ CWR19F-475
*@C+
10 4.7 1 10 12 6 8 8 5.5 C
TAZB685*010C#@0^++ CWR19F-685
*@B+
10 6.8 1 10 12 6 8 8 8 B
TAZC685*010C#@0^++ CWR19F-685
*@C+
10 6.8 1 10 12 6 8 8 5.5 C
TAZD685*010C#@0^++ CWR19F-685
*@D+
10 6.8 1 10 12 6 8 8 5 D
TAZB106*010C#@0^++ CWR19F-106
*@B+
10 10 1 10 12 8 10 10 8 B
* = Tolerance: # = Inspection Level: @ = Failure Rate Level: + = Surge Option:
= Packaging:
M = ±20% S = Std. Conformance Weibull: B = 0.1%/1000 Hrs. For TBJ p/n: For TBJ p/n:
K = ±10% L = Group A (90% C = 0.01%/1000 Hrs. 00 = None B = Bulk
J = ±5% (Special order only) For CWR p/n: conf.) 23 = 10 cycles, +25°C R = 7" T&R
M = Military Conformance per Comm: Z = Non ER 24 = 10 cycles, -55°C & +85°C S = 13" T&R
MIL-PRF-55365 45 = 10 cycles, -55°C & +85°C before Weibull For CWR p/n:
For CWR p/n: Bulk = Standard
A = 10 cycles, +25°C \TR = 7" T&R
B = 10 cycles, -55°C & +85°C \TR13 = 13" T&R
C = 10 cycles, -55°C & +85°C before Weibull \W = Waffle
Z = None (required for CWR19 & CWR29 only)
58
Part Number Designations
Following the voltage code, C designates Standard, L designates Low ESR Ratings
CWR19, CWR29 DESIGNATIONS ARE INCLUDED FOR REFERENCE ONLY – USE TAZ P/N TO ORDER
Surface Mount Military
TAZ Professional and CWR19 - MIL-PRF-55365/11
DC Leakage (max) Dissipation Factor (max)
DC rated Cap ESR (max) Case
AVX Part Number QPL Part Number voltage (nom) +25°C +85°C +125°C +25°C +85/125°C -55°C 100 kHz Size
(85°C) µF (µA) (µA) (µA) (%) (%) (%) +25°C
(volts) (Ohms)
TAZC106*010C#@0^++ CWR19F-106
*@C+
10 10 1 10 12 6 8 8 5.5 C
TAZD106*010C#@0^++ CWR19F-106
*@D+
10 10 1 10 12 6 8 8 4 D
TAZE106*010C#@0^++ CWR19F-106
*@E+
10 10 1 10 12 6 8 8 3.5 E
TAZD156*010C#@0^++ CWR19F-156
*@D+
10 15 2 20 24 6 8 8 5 D
TAZE156*010C#@0^++ CWR19F-156
*@E+
10 15 2 20 24 8 10 10 3 E
TAZE226*010C#@0^++ CWR19F-226
*@E+
10 22 3 30 36 8 10 10 2 E
TAZF336*010C#@0^++ CWR19F-336
*@F+
10 33 3 30 36 8 10 10 1.5 F
TAZF476*010C#@0^++ CWR19F-476
*@F+
10 47 4 40 48 10 12 12 1.5 F
TAZG476*010C#@0^++ CWR19F-476
*@G+
10 47 4 40 48 10 12 12 1 G
TAZG686*010C#@0^++ CWR19F-686
*@G+
10 68 6 60 72 10 12 12 1.1 G
TAZG107*010C#@0^++ CWR19F-107
*@G+
10 100 10 100 120 10 12 12 1.1 G
TAZH107*010C#@0^++ CWR19F-107
*@H+
10 100 10 100 120 10 12 12 0.9 H
TAZH157*010C#@0^++ CWR19F-157
*@H+
10 150 15 150 180 10 12 12 0.9 H
TAZX157*010C#@0^++ CWR19F-157
*@X+
10 150 15 150 180 10 12 12 0.9 X
TAZH227*010C#@0^++ CWR19F-227
*@H+
10 220 20 200 240 10 12 12 0.9 H
TAZA105*015C#@0^++ CWR19H-105
*@A+
15 1 1 10 12 6 8 8 15 A
TAZA155*015C#@0^++ CWR19H-155
*@A+
15 1.5 1 10 12 6 8 8 15 A
TAZA225*015C#@0^++ CWR19H-225
*@A+
15 2.2 1 10 12 6 8 8 15 A
TAZC225*015C#@0^++ CWR19H-225
*@C+
15 2.2 1 10 12 6 8 8 5.5 C
TAZB335*015C#@0^++ CWR19H-335
*@B+
15 3.3 1 10 12 6 8 8 9 B
TAZB475*015C#@0^++ CWR19H-475
*@B+
15 4.7 1 10 12 6 8 8 5 B
TAZC475*015C#@0^++ CWR19H-475
*@C+
15 4.7 1 10 12 6 8 8 5.5 C
TAZD475*015C#@0^++ CWR19H-475
*@D+
15 4.7 1 10 12 6 8 8 6 D
TAZD685*015C#@0^++ CWR19H-685
*@D+
15 6.8 1 10 12 6 8 8 6 D
TAZE685*015C#@0^++ CWR19H-685
*@E+
15 6.8 1 10 12 8 10 12 3 E
TAZD106*015C#@0^++ CWR19H-106
*@D+
15 10 2 20 24 6 8 8 6 D
TAZE106*015C#@0^++ CWR19H-106
*@E+
15 10 2 20 24 6 8 8 4 E
TAZE156*015C#@0^++ CWR19H-156
*@E+
15 15 2 20 24 6 8 8 4 E
TAZF156*015C#@0^++ CWR19H-156
*@F+
15 15 2 20 24 8 10 10 3 F
TAZF226*015C#@0^++ CWR19H-226
*@F+
15 22 3 30 36 8 10 10 3 F
TAZF336*015C#@0^++ CWR19H-336
*@F+
15 33 5 50 60 6 8 8 3 F
TAZG336*015C#@0^++ CWR19H-336
*@G+
15 33 6 60 72 8 10 10 1.1 G
TAZG476*015C#@0^++ CWR19H-476
*@G+
15 47 10 100 120 8 10 10 1.1 G
TAZH476*015C#@0^++ CWR19H-476
*@H+
15 47 10 100 120 8 10 10 0.9 H
TAZG686*015C#@0^++ CWR19H-686
*@G+
15 68 10 100 120 8 10 10 1.1 G
TAZH686*015C#@0^++ CWR19H-686
*@H+
15 68 10 100 120 8 10 10 0.9 H
TAZH107*015C#@0^++ CWR19H-107
*@H+
15 100 15 150 180 10 12 12 0.9 H
TAZA684*020C#@0^++ CWR19J-684
*@A+
20 0.68 1 10 12 6 8 8 15 A
TAZA105*020C#@0^++ CWR19J-105
*@A+
20 1 1 10 12 6 8 8 15 A
TAZB155*020C#@0^++ CWR19J-155
*@B+
20 1.5 1 10 12 6 8 8 9 B
TAZC155*020C#@0^++ CWR19J-155
*@C+
20 1.5 1 10 12 6 8 8 6 C
TAZB225*020C#@0^++ CWR19J-225
*@B+
20 2.2 1 10 12 6 8 8 9 B
TAZD335*020C#@0^++ CWR19J-335
*@D+
20 3.3 1 10 12 6 8 8 6 D
^ = Termination Finish:1# = Inspection Level: * = Tolerance: @ = Failure Rate Level: + = Surge Option:
= Packaging:
For TAZ p/n: S = Std. Conformance M = ±20% Weibull: B = 0.1%/1000 Hrs. For TAZ p/n: For TAZ p/n:
9 = Gold Plated L = Group A K = ±10% (90% C = 0.01%/1000 Hrs. 00 = None B = Bulk
8 = Hot Solder Dipped For CWR p/n: J = ±5% (Special conf.) 23 = 10 cycles, +25°C R = 7" T&R
0 = Solder Fused M = Military order only) Comm: Z = Non ER 24 = 10 cycles, -55°C & +85°C S = 13" T&R
For CWR p/n: Conformance per 45 = 10 cycles, -55°C & +85°C before Weibull For CWR p/n:
B = Gold Plated MIL-PRF-55365 For CWR p/n: Bulk = Standard
C = Hot Solder Dipped A = 10 cycles, +25°C \TR = 7" T&R
K = Solder Fused B = 10 cycles, -55°C & +85°C \TR13 = 13" T&R
C = 10 cycles, -55°C & +85°C before Weibull \W = Waffle
Z = None (required for CWR19 & CWR29 only)
59
Surface Mount Military
TAZ Professional and CWR19 - MIL-PRF-55365/11
DC Leakage (max) Dissipation Factor (max)
DC rated Cap ESR (max) Case
AVX Part Number QPL Part Number voltage (nom) +25°C +85°C +125°C +25°C +85/125°C -55°C 100 kHz Size
(85°C) µF (µA) (µA) (µA) (%) (%) (%) +25°C
(volts) (Ohms)
TAZE475*020C#@0^++ CWR19J-475
*@E+
20 4.7 1 10 12 6 8 8 6 E
TAZE685*020C#@0^++ CWR19J-685
*@E+
20 6.8 2 20 24 6 8 8 5 E
TAZE106*020C#@0^++ CWR19J-106
*@E+
20 10 2 20 24 6 8 8 5 E
TAZF106*020C#@0^++ CWR19J-106
*@F+
20 10 2 20 24 6 8 8 3 F
TAZF156*020C#@0^++ CWR19J-156
*@F+
20 15 3 30 36 6 8 8 3 F
TAZG226*020C#@0^++ CWR19J-226
*@G+
20 22 4 40 48 6 8 8 2.5 G
TAZH336*020C#@0^++ CWR19J-336
*@H+
20 33 6 60 72 8 10 10 0.9 H
TAZH476*020C#@0^++ CWR19J-476
*@H+
20 47 10 100 120 8 10 10 0.9 H
TAZX476*020C#@0^++ CWR19J-476
*@X+
20 47 10 100 120 8 10 10 0.9 X
TAZA474*025C#@0^++ CWR19K-474
*@A+
25 0.47 1 10 12 6 8 8 15 A
TAZB105*025C#@0^++ CWR19K-105
*@B+
25 1 1 10 12 6 8 8 10 B
TAZC105*025C#@0^++ CWR19K-105
*@C+
25 1 1 10 12 6 8 8 6.5 C
TAZD225*025C#@0^++ CWR19K-225
*@D+
25 2.2 1 10 12 6 8 8 6 D
TAZE335*025C#@0^++ CWR19K-335
*@E+
25 3.3 1 10 12 6 8 8 4 E
TAZF685*025C#@0^++ CWR19K-685
*@F+
25 6.8 2 20 24 6 8 8 3 F
TAZG156*025C#@0^++ CWR19K-156
*@G+
25 15 4 40 48 6 8 8 1.4 G
TAZG226*025C#@0^++ CWR19K-226
*@G+
25 22 6 60 72 6 8 8 1.4 G
TAZH226*025C#@0^++ CWR19K-226
*@H+
25 22 6 60 72 6 8 8 0.9 H
TAZX226*025C#@0^++ CWR19K-226
*@X+
25 22 6 60 72 6 8 8 0.9 X
TAZH336*025C#@0^++ CWR19K-336
*@H+
25 33 10 100 120 8 10 10 0.9 H
TAZX336*025C#@0^++ CWR19K-336
*@X+
25 33 10 100 120 8 10 10 0.9 X
TAZA334*035C#@0^++ CWR19M-334
*@A+
35 0.33 1 10 12 6 8 8 22 A
TAZC684*035C#@0^++ CWR19M-684
*@C+
35 0.68 1 10 12 6 8 8 10 C
TAZG685*035C#@0^++ CWR19M-685
*@G+
35 6.8 3 30 36 6 8 8 1.5 G
TAZH106*035C#@0^++ CWR19M-106
*@H+
35 10 4 40 48 8 10 10 0.9 H
TAZX156*035C#@0^++ CWR19M-156
*@X+
35 15 6 60 72 6 8 8 0.9 X
TAZC474*050C#@0^++ CWR19N-474
*@C+
50 0.47 1 10 12 6 8 8 8 C
Part Number Designations
Following the voltage code, C designates Standard, L designates Low ESR Ratings
CWR19, CWR29 DESIGNATIONS ARE INCLUDED FOR REFERENCE ONLY – USE TAZ P/N TO ORDER
^ = Termination Finish:1# = Inspection Level: * = Tolerance: @ = Failure Rate Level: + = Surge Option:
= Packaging:
For TAZ p/n: S = Std. Conformance M = ±20% Weibull: B = 0.1%/1000 Hrs. For TAZ p/n: For TAZ p/n:
9 = Gold Plated L = Group A K = ±10% (90% C = 0.01%/1000 Hrs. 00 = None B = Bulk
8 = Hot Solder Dipped For CWR p/n: J = ±5% (Special conf.) 23 = 10 cycles, +25°C R = 7" T&R
0 = Solder Fused M = Military order only) Comm: Z = Non ER 24 = 10 cycles, -55°C & +85°C S = 13" T&R
For CWR p/n: Conformance per 45 = 10 cycles, -55°C & +85°C before Weibull For CWR p/n:
B = Gold Plated MIL-PRF-55365 For CWR p/n: Bulk = Standard
C = Hot Solder Dipped A = 10 cycles, +25°C \TR = 7" T&R
K = Solder Fused B = 10 cycles, -55°C & +85°C \TR13 = 13" T&R
C = 10 cycles, -55°C & +85°C before Weibull \W = Waffle
Z = None (required for CWR19 & CWR29 only)
60
Surface Mount Military
CWR29
A low ESR version of CWR09 and CWR19 that is fully quali-
fied to MIL-PRF-55365/11, this series represents the most
flexible of surface mount form factors, offering nine case
sizes. The molded construction is compatible with a wide
range of SMT board assembly processes including wave or
reflow solder, conductive epoxy or compression bonding
techniques. The five smaller cases are characterized by their
low profile construction; with the A case being the world’s
smallest molded military tantalum. There are three termina-
tion finishes available: fused solder plated (“K” per MIL-PRF-
55365), hot solder dipped (“C”) and gold plated (“B”). In
addition, the molding compound has been selected to meet
the requirements of UL94V-0 (Flame Retardancy) and
requirements of NASA SP-R-0022A (Outgassing).
CWR29 - MIL-PRF-55365/11
LOW ESR RANGE - TAZ PROFESSIONAL AND CWR29 MILITARY (MIL PRF-55365/11)
Capacitance and Votage Range (letter denotes case size)
Capacitance Rated voltage DC (VR) at 85ºC
µF Code 4V(C) 6.3V(D) 10V(F) 15V(H) 20V(J) 25V(K) 35V(M) 50V(N)
0.10 104 A
0.15 154 A
0.22 224 AB
0.33 334 AAB
0.47 474 A A B C
0.68 684 A A/B B C D
1.0 105 A A A/B B/C D E
1.5 155 A A/B A/B B/C D E F
2.2 225 A A/B A/C B/D D/E F
3.3 335 A A/B A/C B/D D/E E F G
4.7 475 A/B A/C B/C/D B/C/D/E E F G H
6.8 685 A/C B/D B/C/D/E D/E E/F F/G G/H
10 106 B/D B/E B/C/D/E D/E/F E/F G H
15 156 B/E B/D/E D/E/F E/F F/G G/H X
22 226 B/D D/E/F E F/G G/H G/H/X
33 336 D/E/F E F/G F/G/H H H/X
47 476 E F/G F/G/H G/H H/X
68 686 E/G F/G/H G G/H
100 107 F/H G G/H H
150 157 G G H/X
220 227 G H H
330 337 H H
CWR29 J B 225 K B D A \TR
PART NUMBERING SYSTEM
Style Voltage
Code
Termination
Finish
Capacitance
Code Packaging
(see page 120)
Surge Test
Option
Z = None Required
Reliability
Grade
Case Size
Capacitance
Tolerance
61
Surface Mount Military
CWR29 - MIL-PRF-55365/11 and TAZ COTS-Plus
DC Leakage (max) Dissipation Factor (max)
DC rated Cap ESR (max) Case
AVX Part Number QPL Part Number voltage (nom) +25°C +85°C +125°C +25°C +85/125°C -55°C 100 kHz Size
(85°C) µF (µA) (µA) (µA) (%) (%) (%) +25°C
(volts) (Ohms)
TAZA225*004L#@0^++ CWR29C-225
*@A+
42.2 1 10 12 6 8 8 4 A
TAZA335*004L#@0^++ CWR29C-335
*@A+
43.3 1 10 12 6 8 8 6 A
TAZA475*004L#@0^++ CWR29C-475
*@A+
44.7 1 10 12 6 8 8 6 A
TAZB475*004L#@0^++ CWR29C-475
*@B+
44.7 1 10 12 6 8 8 3.2 B
TAZA685*004L#@0^++ CWR29C-685
*@A+
46.8 1 10 12 6 8 8 6 A
TAZC685*004L#@0^++ CWR29C-685
*@C+
46.8 1 10 12 6 8 8 2.2 C
TAZB106*004L#@0^++ CWR29C-106
*@B+
410 1 10 12 8 10 10 3.2 B
TAZD106*004L#@0^++ CWR29C-106
*@D+
410 1 10 12 8 8 10 1.3 D
TAZB156*004L#@0^++ CWR29C-156
*@B+
415 1 10 12 8 10 10 3.2 B
TAZE156*004L#@0^++ CWR29C-156
*@E+
415 1 10 12 8 10 12 1 E
TAZB226*004L#@0^++ CWR29C-226
*@B+
422 1 10 12 8 10 10 3.2 B
TAZD226*004L#@0^++ CWR29C-226
*@D+
422 1 10 12 8 10 12 1.3 D
TAZD336*004L#@0^++ CWR29C-336
*@D+
433 2 20 24 8 10 12 1.3 D
TAZE336*004L#@0^++ CWR29C-336
*@E+
433 2 20 24 8 10 12 0.9 E
TAZF336*004L#@0^++ CWR29C-336
*@F+
433 2 20 24 8 10 12 0.6 F
TAZE476*004L#@0^++ CWR29C-476
*@E+
447 2 20 24 8 10 12 0.9 E
TAZE686*004L#@0^++ CWR29C-686
*@E+
468 3 30 36 8 10 12 0.9 E
TAZG686*004L#@0^++ CWR29C-686
*@G+
4683 30 36 10 12 12 0.275 G
TAZF107*004L#@0^++ CWR29C-107
*@F+
4100 4 40 48 10 12 12 0.55 F
TAZH107*004L#@0^++ CWR29C-107
*@H+
4100 4 40 48 10 12 12 0.18 H
TAZG157*004L#@0^++ CWR29C-157
*@G+
4150 6 60 72 10 12 12 0.25 G
TAZG227*004L#@0^++ CWR29C-227
*@G+
4220 8 80 96 10 12 12 0.2 G
TAZH337*004L#@0^++ CWR29C-337
*@H+
4330 10 100 120 10 12 12 0.18
TAZA155*006L#@0^++ CWR29D-155
*@A+
61.5 1 10 12 6 8 8 4 A
TAZA335*006L#@0^++ CWR29D-335
*@A+
63.3 1 10 12 6 8 8 6 A
TAZB335*006L#@0^++ CWR29D-335
*@B+
63.3 1 10 12 6 8 8 3.2 B
TAZA475*006L#@0^++ CWR29D-475
*@A+
64.7 1 10 12 6 8 8 6 A
TAZC475*006L#@0^++ CWR29D-475
*@C+
64.7 1 10 12 6 8 8 2.2 C
TAZB685*006L#@0^++ CWR29D-685
*@B+
66.8 1 10 12 6 8 8 3.2 B
TAZD685*006L#@0^++ CWR29D-685
*@D+
66.8 1 10 12 6 8 8 1.5 D
TAZB106*006L#@0^++ CWR29D-106
*@B+
610 1 10 12 6 8 8 3.2 B
TAZE106*006L#@0^++ CWR29D-106
*@E+
610 1 10 12 8 10 12 1 E
TAZB156*006L#@0^++ CWR29D-156
*@B+
615 1 10 12 8 10 10 3.2 B
TAZD156*006L#@0^++ CWR29D-156
*@D+
615 1 10 12 8 10 12 1.7 D
TAZE156*006L#@0^++ CWR29D-156
*@E+
615 1 10 12 8 10 12 0.9 E
TAZD226*006L#@0^++ CWR29D-226
*@D+
622 1 10 12 6 8 8 1.7 D
TAZE226*006L#@0^++ CWR29D-226
*@E+
622 2 20 24 8 10 12 1 E
TAZF226*006L#@0^++ CWR29D-226
*@F+
622 2 20 24 8 10 12 0.6 F
TAZE336*006L#@0^++ CWR29D-336
*@E+
633 2 20 24 6 8 8 1 E
TAZF476*006L#@0^++ CWR29D-476
*@F+
647 3 30 36 8 10 12 1 F
TAZG476*006L#@0^++ CWR29D-476
*@G+
6473 30 36 10 12 12 0.275 G
TAZF686*006L#@0^++ CWR29D-686
*@F+
668 4 40 48 10 12 12 0.4 F
TAZG686*006L#@0^++ CWR29D-686
*@G+
668 4 40 48 10 12 12 0.25 G
Part Number Designations
Following the voltage code, C designates Standard, L designates Low ESR Ratings
CWR19, CWR29 DESIGNATIONS ARE INCLUDED FOR REFERENCE ONLY – USE TAZ P/N TO ORDER
^ = Termination Finish:1# = Inspection Level: * = Tolerance: @ = Failure Rate Level: + = Surge Option:
= Packaging:
For TAZ p/n: S = Std. Conformance M = ±20% Weibull: B = 0.1%/1000 Hrs. For TAZ p/n: For TAZ p/n:
9 = Gold Plated L = Group A K = ±10% (90% C = 0.01%/1000 Hrs. 00 = None B = Bulk
8 = Hot Solder Dipped For CWR p/n: J = ±5% (Special conf.) 23 = 10 cycles, +25°C R = 7" T&R
0 = Solder Fused M = Military order only) Comm: Z = Non ER 24 = 10 cycles, -55°C & +85°C S = 13" T&R
For CWR p/n: Conformance per 45 = 10 cycles, -55°C & +85°C before Weibull For CWR p/n:
B = Gold Plated MIL-PRF-55365 For CWR p/n: Bulk = Standard
C = Hot Solder Dipped A = 10 cycles, +25°C \TR = 7" T&R
K = Solder Fused B = 10 cycles, -55°C & +85°C \TR13 = 13" T&R
C = 10 cycles, -55°C & +85°C before Weibull \W = Waffle
Z = None (required for CWR19 & CWR29 only)
62
Surface Mount Military
CWR29 - MIL-PRF-55365/11 and TAZ COTS-Plus
DC Leakage (max) Dissipation Factor (max)
DC rated Cap ESR (max) Case
AVX Part Number QPL Part Number voltage (nom) +25°C +85°C +125°C +25°C +85/125°C -55°C 100 kHz Size
(85°C) µF (µA) (µA) (µA) (%) (%) (%) +25°C
(volts) (Ohms)
TAZH686*006L#@0^++ CWR29D-686
*@H+
668 4 40 48 10 12 12 0.18 H
TAZG107*006L#@0^++ CWR29D-107
*@G+
6100 6 60 72 10 12 12 0.275 G
TAZG157*006L#@0^++ CWR29D-157
*@G+
6150 10 100 120 10 12 12 0.275 G
TAZH227*006L#@0^++ CWR29D-227
*@H+
6220 10 100 120 10 12 12 0.18 H
TAZH337*006L#@0^++ CWR29D-337
*@H+
6330 20 200 240 10 12 12 0.18 H
TAZA105*010L#@0^++ CWR29F-105
*@A+
10 1 1 10 12 6 8 8 5 A
TAZA225*010L#@0^++ CWR29F-225
*@A+
10 2.2 1 10 12 6 8 8 6 A
TAZB225*010L#@0^++ CWR29F-225
*@B+
10 2.2 1 10 12 6 8 8 3.2 B
TAZA335*010L#@0^++ CWR29F-335
*@A+
10 3.3 1 10 12 6 8 8 6 A
TAZC335*010L#@0^++ CWR29F-335
*@C+
10 3.3 1 10 12 6 8 8 2.2 C
TAZB475*010L#@0^++ CWR29F-475
*@B+
10 4.7 1 10 12 6 8 8 3.2 B
TAZC475*010L#@0^++ CWR29F-475
*@C+
10 4.7 1 10 12 6 8 8 2.2 C
TAZD475*010L#@0^++ CWR29F-475
*@D+
10 4.7 1 10 12 6 8 8 1.5 D
TAZB685*010L#@0^++ CWR29F-685
*@B+
10 6.8 1 10 12 6 8 8 3.2 B
TAZC685*010L#@0^++ CWR29F-685
*@C+
10 6.8 1 10 12 6 8 8 2.2 C
TAZD685*010L#@0^++ CWR29F-685
*@D+
10 6.8 1 10 12 6 8 8 1.7 D
TAZE685*010L#@0^++ CWR29F-685
*@E+
10 6.8 1 10 12 6 8 8 1 E
TAZB106*010L#@0^++ CWR29F-106
*@B+
10 10 1 10 12 8 10 10 3.2 B
TAZC106*010L#@0^++ CWR29F-106
*@C+
10 10 1 10 12 6 8 8 2.2 C
TAZD106*010L#@0^++ CWR29F-106
*@D+
10 10 1 10 12 6 8 8 1.3 D
TAZE106*010L#@0^++ CWR29F-106
*@E+
10 10 1 10 12 6 8 8 1 E
TAZD156*010L#@0^++ CWR29F-156
*@D+
10 15 2 20 24 6 8 8 1.7 D
TAZE156*010L#@0^++ CWR29F-156
*@E+
10 15 2 20 24 8 10 10 0.9 E
TAZF156*010L#@0^++ CWR29F-156
*@F+
10 15 2 20 24 8 8 10 0.7 F
TAZE226*010L#@0^++ CWR29F-226
*@E+
10 22 3 30 36 8 10 10 0.6 E
TAZF336*010L#@0^++ CWR29F-336
*@F+
10 33 3 30 36 8 10 10 0.4 F
TAZG336*010L#@0^++ CWR29F-336
*@G+
10 33 3 30 36 10 12 12 0.275 G
TAZF476*010L#@0^++ CWR29F-476
*@F+
10 47 4 40 48 10 12 12 0.4 F
TAZG476*010L#@0^++ CWR29F-476
*@G+
10 47 4 40 48 10 12 12 0.25 G
TAZH476*010L#@0^++ CWR29F-476
*@H+
10 47 5 50 60 10 12 12 0.18 H
TAZG686*010L#@0^++ CWR29F-686
*@G+
10 68 6 60 72 10 12 12 0.275 G
TAZG107*010L#@0^++ CWR29F-107
*@G+
10 100 10 100 120 10 12 12 0.275 G
TAZH107*010L#@0^++ CWR29F-107
*@H+
10 100 10 100 120 10 12 12 0.18 H
TAZH157*010L#@0^++ CWR29F-157
*@H+
10 150 15 150 180 10 12 12 0.18 H
TAZX157*010L#@0^++ CWR29F-157
*@X+
10 150 15 150 180 10 12 12 0.065 X
TAZH227*010L#@0^++ CWR29F-227
*@H+
10 220 20 200 240 10 12 12 0.18 H
TAZA684*015L#@0^++ CWR29H^684
*@A+
15 0.68 1 10 12 6 8 8 6 A
TAZA105*015L#@0^++ CWR29H^105
*@A+
15 1 1 10 12 6 8 8 7.5 A
TAZA155*015L#@0^++ CWR29H^155
*@A+
15 1.5 1 10 12 6 8 8 7.5 A
TAZB155*015L#@0^++ CWR29H^155
*@B+
15 1.5 1 10 12 6 8 8 3.2 B
TAZA225*015L#@0^++ CWR29H^225
*@A+
15 2.2 1 10 12 6 8 8 7.5 A
TAZC225*015L#@0^++ CWR29H^225
*@C+
15 2.2 1 10 12 6 8 8 2.2 C
TAZB335*015L#@0^++ CWR29H^335
*@B+
15 3.3 1 10 12 6 8 8 3.6 B
TAZD335*015L#@0^++ CWR29H^335
*@D+
15 3.3 1 10 12 6 8 8 1.7 D
Part Number Designations
Following the voltage code, C designates Standard, L designates Low ESR Ratings
CWR19, CWR29 DESIGNATIONS ARE INCLUDED FOR REFERENCE ONLY – USE TAZ P/N TO ORDER
^ = Termination Finish:1# = Inspection Level: * = Tolerance: @ = Failure Rate Level: + = Surge Option:
= Packaging:
For TAZ p/n: S = Std. Conformance M = ±20% Weibull: B = 0.1%/1000 Hrs. For TAZ p/n: For TAZ p/n:
9 = Gold Plated L = Group A K = ±10% (90% C = 0.01%/1000 Hrs. 00 = None B = Bulk
8 = Hot Solder Dipped For CWR p/n: J = ±5% (Special conf.) 23 = 10 cycles, +25°C R = 7" T&R
0 = Solder Fused M = Military order only) Comm: Z = Non ER 24 = 10 cycles, -55°C & +85°C S = 13" T&R
For CWR p/n: Conformance per 45 = 10 cycles, -55°C & +85°C before Weibull For CWR p/n:
B = Gold Plated MIL-PRF-55365 For CWR p/n: Bulk = Standard
C = Hot Solder Dipped A = 10 cycles, +25°C \TR = 7" T&R
K = Solder Fused B = 10 cycles, -55°C & +85°C \TR13 = 13" T&R
C = 10 cycles, -55°C & +85°C before Weibull \W = Waffle
Z = None (required for CWR19 & CWR29 only)
63
Surface Mount Military
CWR29 - MIL-PRF-55365/11 and TAZ COTS-Plus
DC Leakage (max) Dissipation Factor (max)
DC rated Cap ESR (max) Case
AVX Part Number QPL Part Number voltage (nom) +25°C +85°C +125°C +25°C +85/125°C -55°C 100 kHz Size
(85°C) µF (µA) (µA) (µA) (%) (%) (%) +25°C
(volts) (Ohms)
TAZB475*015L#@0^++ CWR29H-475
*@B+
15 4.7 1 10 12 6 8 8 2 B
TAZC475*015L#@0^++ CWR29H-475
*@C+
15 4.7 1 10 12 6 8 8 2.2 C
TAZD475*015L#@0^++ CWR29H-475
*@D+
15 4.7 1 10 12 6 8 8 2 D
TAZE475*015L#@0^++ CWR29H-475
*@E+
15 4.7 1 10 12 6 8 8 1.2 E
TAZD685*015L#@0^++ CWR29H-685
*@D+
15 6.8 1 10 12 6 8 8 2 D
TAZE685*015L#@0^++ CWR29H-685
*@E+
15 6.8 1 10 12 8 10 12 0.9 E
TAZD106*015L#@0^++ CWR29H-106
*@D+
15 10 2 20 24 6 8 8 2 D
TAZE106*015L#@0^++ CWR29H-106
*@E+
15 10 2 20 24 6 8 8 1.2 E
TAZF106*015L#@0^++ CWR29H-106
*@F+
15 10 2 20 24 6 8 8 0.667 F
TAZE156*015L#@0^++ CWR29H-156
*@E+
15 15 2 20 24 6 8 8 1.2 E
TAZF156*015L#@0^++ CWR29H-156
*@F+
15 15 2 20 24 8 10 10 0.8 F
TAZF226*015L#@0^++ CWR29H-226
*@F+
15 22 3 30 36 8 10 10 0.8 F
TAZG226*015L#@0^++ CWR29H-226
*@G+
15 22 4 40 48 6 8 8 0.275 G
TAZF336*015L#@0^++ CWR29H-336
*@F+
15 33 5 50 60 6 8 8 0.8 F
TAZG336*015L#@0^++ CWR29H-336
*@G+
15 33 6 60 72 8 10 10 0.275 G
TAZH336*015L#@0^++ CWR29H-336
*@H+
15 33 5 50 60 8 8 10 0.18 H
TAZG476*015L#@0^++ CWR29H-476
*@G+
15 47 10 100 120 8 10 10 0.275 G
TAZH476*015L#@0^++ CWR29H-476
*@H+
15 47 10 100 120 8 10 10 0.18 H
TAZG686*015L#@0^++ CWR29H-686
*@G+
15 68 10 100 120 8 10 10 0.275 G
TAZH686*015L#@0^++ CWR29H-686
*@H+
15 68 10 100 120 8 10 10 0.18 H
TAZH107*015L#@0^++ CWR29H-107
*@H+
15 100 15 150 180 10 12 12 0.18 H
TAZA474*020L#@0^++ CWR29J-474
*@A+
20 0.47 1 10 12 8 8 10 7.5 A
TAZA684*020L#@0^++ CWR29J-684
*@A+
20 0.68 1 10 12 6 8 8 7.5 A
TAZB684*020L#@0^++ CWR29J-684
*@B+
20 0.68 1 10 12 6 8 8 5.6 B
TAZA105*020L#@0^++ CWR29J-105
*@A+
20 1 1 10 12 6 8 8 7.5 A
TAZB105*020L#@0^++ CWR29J-105
*@B+
20 1 1 10 12 6 8 8 4.8 B
TAZB155*020L#@0^++ CWR29J-155
*@B+
20 1.5 1 10 12 6 8 8 3.6 B
TAZC155*020L#@0^++ CWR29J-155
*@C+
20 1.5 1 10 12 6 8 8 2.4 C
TAZB225*020L#@0^++ CWR29J-225
*@B+
20 2.2 1 10 12 6 8 8 3.6 B
TAZD226*020L#@0^++ CWR29J-225
*@D+
20 2.2 1 10 12 6 8 8 1.7 D
TAZD335*020L#@0^++ CWR29J-335
*@D+
20 3.3 1 10 12 6 8 8 2 D
TAZE335*020L#@0^++ CWR29J-335
*@E+
20 3.3 1 10 12 6 8 8 1.2 E
TAZE475*020L#@0^++ CWR29J-475
*@E+
20 4.7 1 10 12 6 8 8 1.7 E
TAZE685*020L#@0^++ CWR29J-685
*@E+
20 6.8 2 20 24 6 8 8 1.5 E
TAZF685*020L#@0^++ CWR29J-685
*@F+
20 6.8 2 20 24 6 8 8 0.7 F
TAZE106*020L#@0^++ CWR29J-106
*@E+
20 10 2 20 24 6 8 8 1.5 E
TAZF106*020L#@0^++ CWR29J-106
*@F+
20 10 2 20 24 6 8 8 0.8 F
TAZF156*020L#@0^++ CWR29J-156
*@F+
20 15 3 30 36 6 8 8 0.8 F
TAZG156*020L#@0^++ CWR29J-156
*@G+
20 15 3 30 36 6 8 8 0.275 G
TAZG226*020L#@0^++ CWR29J-226
*@G+
20 22 4 40 48 6 8 8 0.625 G
TAZH226*020L#@0^++ CWR29J-226
*@H+
20 22 4 40 48 6 8 8 0.18 H
TAZH336*020L#@0^++ CWR29J-336
*@H+
20 33 6 60 72 8 10 10 0.18 H
TAZH476*020L#@0^++ CWR29J-476
*@H+
20 47 10 100 120 8 10 10 0.18 H
TAZX476*020L#@0^++ CWR29J-476
*@X+
20 47 10 100 120 8 10 10 0.11 X
Part Number Designations
Following the voltage code, C designates Standard, L designates Low ESR Ratings
CWR19, CWR29 DESIGNATIONS ARE INCLUDED FOR REFERENCE ONLY – USE TAZ P/N TO ORDER
^ = Termination Finish:1# = Inspection Level: * = Tolerance: @ = Failure Rate Level: + = Surge Option:
= Packaging:
For TAZ p/n: S = Std. Conformance M = ±20% Weibull: B = 0.1%/1000 Hrs. For TAZ p/n: For TAZ p/n:
9 = Gold Plated L = Group A K = ±10% (90% C = 0.01%/1000 Hrs. 00 = None B = Bulk
8 = Hot Solder Dipped For CWR p/n: J = ±5% (Special conf.) 23 = 10 cycles, +25°C R = 7" T&R
0 = Solder Fused M = Military order only) Comm: Z = Non ER 24 = 10 cycles, -55°C & +85°C S = 13" T&R
For CWR p/n: Conformance per 45 = 10 cycles, -55°C & +85°C before Weibull For CWR p/n:
B = Gold Plated MIL-PRF-55365 For CWR p/n: Bulk = Standard
C = Hot Solder Dipped A = 10 cycles, +25°C \TR = 7" T&R
K = Solder Fused B = 10 cycles, -55°C & +85°C \TR13 = 13" T&R
C = 10 cycles, -55°C & +85°C before Weibull \W = Waffle
Z = None (required for CWR19 & CWR29 only)
64
Surface Mount Military
CWR29 - MIL-PRF-55365/11 and TAZ COTS-Plus
DC Leakage (max) Dissipation Factor (max)
DC rated Cap ESR (max) Case
AVX Part Number QPL Part Number voltage (nom) +25°C +85°C +125°C +25°C +85/125°C -55°C 100 kHz Size
(85°C) µF (µA) (µA) (µA) (%) (%) (%) +25°C
(volts) (Ohms)
TAZA334*025L#@0^++ CWR29K-334
*@A+
25 0.33 1 10 12 6 8 8 7.5 A
TAZA474*025L#@0^++ CWR29K-474
*@A+
25 0.47 1 10 12 6 8 8 7.5 A
TAZB684*025L#@0^++ CWR29K-684
*@B+
25 0.68 1 10 12 6 8 8 4 B
TAZB105*025L#@0^++ CWR29K-105
*@B+
25 1 1 10 12 6 8 8 4 B
TAZC105*025L#@0^++ CWR29K-105
*@C+
25 1 1 10 12 6 8 8 2.6 C
TAZD155*025L#@0^++ CWR29K-155
*@D+
25 1.5 1 10 12 6 8 8 1.7 D
TAZD225*025L#@0^++ CWR29K-225
*@D+
25 2.2 1 10 12 6 8 8 2 D
TAZE225*025L#@0^++ CWR29K-225
*@E+
25 2.2 1 10 12 6 8 8 1 E
TAZE335*025L#@0^++ CWR29K-335
*@E+
25 3.3 1 10 12 6 8 8 1.2 E
TAZF475*025L#@0^++ CWR29K-475
*@F+
25 4.7 2 20 24 6 8 8 0.7 F
TAZF685*025L#@0^++ CWR29K-685
*@F+
25 6.8 2 20 24 6 8 8 0.8 F
TAZG685*025L#@0^++ CWR29K-685
*@G+
25 6.8 2 20 24 6 8 8 0.3 G
TAZG106*025L#@0^++ CWR29K-106
*@G+
25 10 3 30 36 6 8 8 0.35 G
TAZG156*025L#@0^++ CWR29K-156
*@G+
25 15 4 40 48 6 8 8 0.35 G
TAZH156*025L#@0^++ CWR29K-156
*@H+
25 15 4 40 48 6 8 8 0.2 H
TAZG226*025L#@0^++ CWR29K-226
*@G+
25 22 6 60 72 6 8 8 0.35 G
TAZH226*025L#@0^++ CWR29K-226
*@H+
25 22 6 60 72 6 8 8 0.18 H
TAZX226*025L#@0^++ CWR29K-226
*@X+
25 22 6 60 72 6 8 8 0.16 X
TAZH336*025L#@0^++ CWR29K-336
*@H+
25 33 10 100 120 6 8 8 0.18 H
TAZX336*025L#@0^++ CWR29K-336
*@X+
25 33 10 100 120 8 10 10 0.13 X
TAZA224*035L#@0^++ CWR29M-224
*@A+
35 0.22 1 10 12 6 8 8 12 A
TAZA334*035L#@0^++ CWR29M-334
*@A+
35 0.33 1 10 12 6 8 8 12 A
TAZB474*035L#@0^++ CWR29M-474
*@B+
35 0.47 1 10 12 6 8 8 6.8 B
TAZC684*035L#@0^++ CWR29M-684
*@C+
35 0.68 1 10 12 6 8 8 4 C
TAZD105*035L#@0^++ CWR29M-105
*@D+
35 1 1 10 12 6 8 8 2.2 D
TAZE155*035L#@0^++ CWR29M-155
*@E+
35 1.5 1 10 12 6 8 8 1.3 E
TAZF335*035L#@0^++ CWR29M-335
*@F+
35 3.3 1 10 12 6 8 8 0.7 F
TAZG475*035L#@0^++ CWR29M-475
*@G+
35 4.7 2 20 24 6 8 8 0.375 G
TAZG685*035L#@0^++ CWR29M-685
*@G+
35 6.8 3 30 36 6 8 8 0.375 G
TAZH685*035L#@0^++ CWR29M-685
*@H+
35 6.8 3 30 36 6 8 8 0.5 H
TAZH106*035L#@0^++ CWR29M-106
*@H+
35 10 4 40 48 8 10 10 0.5 H
TAZX156*035L#@0^++ CWR29M-156
*@X+
35 15 6 60 72 6 8 8 0.19 X
TAZA104*050L#@0^++ CWR29N-104
*@A+
50 0.1 1 10 12 6 8 8 12 A
TAZA154*050L#@0^++ CWR29N-154
*@A+
50 0.15 1 10 12 6 8 8 12 A
TAZB224*050L#@0^++ CWR29N-224
*@B+
50 0.22 1 10 12 6 8 8 6.8 B
TAZB334*050L#@0^++ CWR29N-334
*@B+
50 0.33 1 10 12 6 8 8 4.8 B
TAZC474*050L#@0^++ CWR29N-474
*@C+
50 0.47 1 10 12 6 8 8 3.2 C
TAZD684*050L#@0^++ CWR29N-684
*@D+
50 0.68 1 10 12 6 8 8 2.3 D
TAZE105*050L#@0^++ CWR29N-105
*@E+
50 1 1 10 12 6 8 8 1.7 E
TAZF155*050L#@0^++ CWR29N-155
*@F+
50 1.5 1 10 12 6 8 8 1.1 F
TAZF225*050L#@0^++ CWR29N-225
*@F+
50 2.2 2 20 24 6 8 8 0.7 F
TAZG335*050L#@0^++ CWR29N-335
*@G+
50 3.3 2 20 24 6 8 8 0.5 G
TAZH475*050L#@0^++ CWR29N-475
*@H+
50 4.7 3 30 36 6 8 8 0.5 H
Part Number Designations
Following the voltage code, C designates Standard, L designates Low ESR Ratings
CWR19, CWR29 DESIGNATIONS ARE INCLUDED FOR REFERENCE ONLY – USE TAZ P/N TO ORDER
^ = Termination Finish:1# = Inspection Level: * = Tolerance: @ = Failure Rate Level: + = Surge Option:
= Packaging:
For TAZ p/n: S = Std. Conformance M = ±20% Weibull: B = 0.1%/1000 Hrs. For TAZ p/n: For TAZ p/n:
9 = Gold Plated L = Group A K = ±10% (90% C = 0.01%/1000 Hrs. 00 = None B = Bulk
8 = Hot Solder Dipped For CWR p/n: J = ±5% (Special conf.) 23 = 10 cycles, +25°C R = 7" T&R
0 = Solder Fused M = Military order only) Comm: Z = Non ER 24 = 10 cycles, -55°C & +85°C S = 13" T&R
For CWR p/n: Conformance per 45 = 10 cycles, -55°C & +85°C before Weibull For CWR p/n:
B = Gold Plated MIL-PRF-55365 For CWR p/n: Bulk = Standard
C = Hot Solder Dipped A = 10 cycles, +25°C \TR = 7" T&R
K = Solder Fused B = 10 cycles, -55°C & +85°C \TR13 = 13" T&R
C = 10 cycles, -55°C & +85°C before Weibull \W = Waffle
Z = None (required for CWR19 & CWR29 only)
65
TAZ Series
COTS-Plus
TAZ COTS-Plus SERIES (CWR09)
TAZH 227 M 006 C R SB 08 00
PART NUMBERING SYSTEM
Style Case
Size
Capacitance
Code
Capacitance
Tolerance
Voltage
Code
Surge Test
Option
Termination
Finish
Qualification/
Reliability
Packaging
(see page 120)
Standard
or Low
ESR Range
This series features:
•
CWR09 form factor in Standard and Extended ratings.
•Weibull Reliability Grading and Surge Test options.
All ratings in this series offer the advantages of molded
body/compliant termination construction, polarity, capaci-
tance and voltage marking. The molded construction is
compatible with a wide range of SMT board assembly
processes including wave or reflow solder, conductive epoxy
or compression bonding techniques.
TAZ COTS-Plus EXTENDED RANGE SERIES (CWR19)
TAZH 227 M 006 C R M 08 00
PART NUMBERING SYSTEM
Style Case
Size
Capacitance
Code
Capacitance
Tolerance
Voltage
Code
Surge Test
Option
Termination
Finish
Qualification/
Reliability
Packaging
(see page 120)
Standard
or Low
ESR Range
This series features:
• CWR19 form factor in Extended ratings
• Low Profile molded design (Cases A through E)
• Extended case size (X) for ratings to 330µF
• Weibull Reliability Grading and Surge Test Options
• Ratings / Electrical Limits not listed in catalog may
be available (Contact AVX)
TAZ COTS-Plus LOW ESR SERIES (CWR29)
This series features:
• CWR29 form factor in Low ESR and Extended ratings
• Low Profile molded design (Cases A through E)
• Low ESR Ratings (Cases A through H and X)
• Extended case size (X) for ratings to 330µF
• Weibull Reliability Grading and Surge Test Options
• Ratings / Electrical Limits not listed in catalog may
be available (Contact AVX)
TAZH 227 M 006 C R M 08 00
PART NUMBERING SYSTEM
Style Case
Size
Capacitance
Code
Capacitance
Tolerance
Voltage
Code
Surge Test
Option
Termination
Finish
Qualification/
Reliability
Packaging
(see page 120)
Standard
or Low
ESR Range
66
Case EIA Length (L) Width (W) Height (H) Term. Width (W1)Term. Length A S min
Code Code ±0.10 (±0.004) ±0.30(±0.012)
A3216-18 3.20±0.20 1.60±0.20 1.60±0.20 1.20 (0.047) 0.80 (0.031) 0.80 (0.031)
(0.126±0.008) (0.063±0.008) (0.063±0.008)
B3528-21 3.50±0.20 2.80±0.20 1.90±0.20 2.20 (0.087) 0.80 (0.031) 1.10 (0.043)
(0.138±0.008) (0.110±0.008) (0.075±0.008)
C6032-28 6.00±0.30 3.20±0.30 2.50±0.30 2.20 (0.087) 1.30 (0.051) 2.50 (0.098)
(0.236±0.012) (0.126±0.012) (0.098±0.012)
D7343-31 7.30±0.30 4.30±0.30 2.80±0.30 2.40 (0.094) 1.30 (0.051) 3.80 (0.150)
(0.287±0.012) (0.169±0.012) (0.110±0.012)
E7343-43 7.30±0.30 4.30±0.30 4.10±0.30 2.40 (0.094) 1.30 (0.051) 3.80 (0.150)
(0.287±0.012) (0.169±0.012) (0.162±0.012)
V7.30±0.30 6.10±0.200 3.45±0.30 3.10 (0.120) 1.40+0.30/-0.20 4.40 (0.173)
(0.287±0.012) (0.240±0.008) (0.136±0.012) (0.055+0.012/-0.008)
TBJ Series
Including CWR11 and COTS-Plus
The TBJ Series encompasses five
case sizes, A through E, corresponding
to EIA-535BAAC, the commercial
industry standard. This series
also offers molded body/compliant
termination construction, polarity and
capacitance marking. The molded
construction is compatible with a wide
range of SMT board assembly
processes including wave or reflow
solder, conductive epoxy or compres-
sion bonding techniques. Standard
termination finish is fused solder. Gold
termination is optional on CWR11
ratings. Case sizes A through D include
QPL ratings available to the CWR11
military part number; other extended
range and Low ESR ratings are avail-
able in all case sizes.
CASE DIMENSIONS: millimeters (inches)
MILITARY MARKING
(Brown marking on gold body)
“COTS – Plus” MARKING
(Brown marking on gold body)
Polarity Stripe (+)
“J” for “JAN” Brand
Capacitance Code
Rated Voltage
Manufacturer’s ID
Polarity Stripe (+)
Capacitance Code
Rated Voltage
Manufacturer’s ID
Lot Number
Technical Data: Unless otherwise specified, all technical data relate to an ambient temperature of 25°C
Capacitance Range: 0.1 to 470 µF
Capacitance Tolerance: ±20%, ±10%, ±5%
Rated DC Voltage: (VR)85°C: 4 6 10 1620253550
Category Voltage: (VC)125°C: 2.7 4 7 10 13 17 23 33
Surge Voltage: (VC)85°C: 5.2 8 13 20 26 33 46 65
125°C: 3.5 5 9 12 16 21 28 40
Operating Temperature Range: -55°C to +125°C
S
L
A
H
W1
W
67
TBJ Series
CWR11 - MIL-PRF-55365/8 and TBJ COTS-Plus
CWR11 J B 225 K B A \TR
Fully qualified to MIL-PRF-55365/8, the CWR11 is the
military version of EIA-535BAAC, the commercial industry
standard. It comprises four case sizes (A through D). This
series also offers molded body/compliant termination
construction, polarity, capacitance and JAN brand marking.
The molded construction is compatible with a wide range of
SMT board assembly processes including wave or reflow
solder, conductive epoxy or compression bonding tech-
niques. There are three termination finishes available: fused
solder plated (“K” per MIL-PRF-55365), hot solder dipped
(“C”) and gold plated (“B”).
CWR11 - MIL-PRF-55365/8
PART NUMBERING SYSTEM
TBJ COTS-Plus SERIES
Style Voltage
Code
Termination
Finish
Capacitance
Code
Packaging
(see page 120)
Surge Test
Option
Reliability
Grade
Capacitance
Tolerance
TBJ D 227 M 006 C R SB 00 00
PART NUMBERING SYSTEM
Style Case
Size
Capacitance
Code
Capacitance
Tolerance
Voltage
Code
Termination
Finish
Qualification/
Reliability
Packaging
(see page 120)
Standard
or Low
ESR Range
This series features:
•
CWR11 form factor in Standard and Extended ratings.
•Low ESR Ratings (Cases A through E).
•Extended Case size (E) for ratings to 470 µF.
•Weibull Reliability Grading and Surge Test options.
All ratings in this series offer the advantages of molded
body/compliant termination construction, polarity, capaci-
tance and voltage marking. The molded construction is
compatible with a wide range of SMT board assembly
processes including wave or reflow solder, conductive epoxy
or compression bonding techniques.
Surge Test
Option
68
DC Leakage (max) Dissipation Factor (max)
QPL Part Number DC rated Cap ESR (max) Case
AVX Part Number (for reference only) voltage (nom) +25°C +85°C +125°C +25°C +85/125°C -55°C 100 kHz Size
(85°C) µF (µA) (µA) (µA) (%) (%) (%) +25°C
(volts) (Ohms)
TBJA225(*)004C#@00++ CWR11CK225*@+42.2 0.5 5.0 6.0 6 9 9 8.0 A
TBJA475(*)004C#@00++ CWR11CK475*@+44.7 0.5 5.0 6.0 6 9 9 8.0 A
TBJA685(*)004C#@00++ 46.8 0.5 5.0 10.0 6 9 10 6.5 A
TBJB685(*)004C#@00++ CWR11CK685*@+46.8 0.5 5.0 6.0 6 9 9 5.5 B
TBJA106(*)004C#@00++ 410.0 0.5 5.0 10.0 6 9 10 6.0 A
TBJB106(*)004C#@00++ CWR11CK106*@+410.0 0.5 5.0 6.0 6 9 9 4.0 B
TBJA156(*)004C#@00++ 415.0 0.6 6.0 12.0 6 9 10 4.0 A
TBJB156(*)004C#@00++ CWR11CK156*@+415.0 0.6 6.0 7.2 6 9 9 3.5 B
TBJA226(*)004C#@00++ 422.0 0.9 9.0 18.0 6 9 10 3.5 A
TBJA336(*)004C#@00++ 433.0 1.4 14.0 28.0 6 9 9 3.0 A
TBJB336(*)004C#@00++ 433.0 1.4 14.0 28.0 6 9 10 2.8 B
TBJC336(*)004C#@00++ CWR11CK336*@+433.0 1.3 13.0 15.6 6 9 9 2.2 C
TBJB476(*)004C#@00++ 447.0 1.9 19.0 38.0 6 9 10 2.4 B
TBJC686(*)004C#@00++ 468.0 2.7 27.0 54.0 6 9 10 1.6 C
TBJD686(*)004C#@00++ CWR11CK686*@+468.0 2.7 27.0 32.4 6 9 9 1.1 D
TBJB107(*)004C#@00++ 4100.0 4.0 40.0 80.0 8 10 12 1.6 B
TBJC107(*)004C#@00++ 4100.0 4.0 40.0 80.0 6 9 10 1.3 C
TBJD107(*)004C#@00++ CWR11CK107*@+4100.0 4.0 40.0 48.0 8 12 12 0.9 D
TBJD227(*)004C#@00++ 4220.0 8.8 88.0 176.0 8 10 12 0.9 D
TBJE337(*)004C#@00++ 4330.0 13.2 132.0 264.0 8 10 12 0.9 E
TBJA155(*)006C#@00++ CWR11DK155*@+6.3 1.5 0.5 5.0 6.0 6 9 9 8.0 A
TBJA225(*)006C#@00++ CWR11DK225*@+6.3 2.2 0.5 5.0 6.0 6 6 9 8.0 A
TBJA335(*)006C#@00++ CWR11DK335*@+6.3 3.3 0.5 5.0 6.0 6 9 9 8.0 A
TBJA475(*)006C#@00++ 6.3 4.7 0.5 5.0 10.0 6 9 10 6.0 A
TBJB475(*)006C#@00++ CWR11DK475*@+6.3 4.7 0.5 5.0 6.0 6 9 9 5.5 B
TBJA685(*)006C#@00++ 6.3 6.8 0.5 5.0 10.0 6 9 10 5.0 A
TBJB685(*)006C#@00++ CWR11DK685*@+6.3 6.8 0.5 5.0 6.0 6 9 9 4.5 B
TBJA106(*)006C#@00++ 6.3 10.0 1.0 10.0 20.0 6 9 10 4.0 A
TBJB106(*)006C#@00++ CWR11DK106*@+6.3 10.0 0.6 6.0 7.2 6 9 9 3.5 B
TBJA156(*)006C#@00++ 6.3 15.0 1.0 10.0 20.0 6 9 10 3.5 A
TBJA156(*)006L#@00++ 6.3 15.0 1.0 10.0 20.0 6 9 10 1.5 A
TBJB156(*)006C#@00++ 6.3 15.0 1.0 10.0 20.0 6 9 10 3.5 B
TBJC156(*)006C#@00++ CWR11DK156*@+6.3 15.0 0.9 9.0 10.8 6 9 9 3.0 C
TBJA226(*)006C#@00++ 6.3 22.0 1.4 14.0 28.0 6 9 10 3.0 A
TBJB226(*)006C#@00++ 6.3 22.0 1.4 14.0 28.0 6 9 10 2.5 B
TBJC226(*)006C#@00++ CWR11DK226*@+6.3 22.0 1.4 14.0 16.8 6 9 9 2.2 C
TBJB336(*)006C#@00++ 6.3 33.0 2.1 21.0 42.0 6 9 10 2.2 B
TBJB336(*)006L#@00++ 6.3 33.0 2.1 21.0 42.0 6 9 10 0.600 B
TBJC336(*)006C#@00++ 6.3 33.0 2.1 21.0 42.0 6 9 10 1.8 C
TBJC476(*)006C#@00++ 6.3 47.0 3.0 30.0 60.0 6 9 10 1.6 C
TBJD476(*)006C#@00++ CWR11DK476*@+6.3 47.0 2.8 28.0 33.6 6 9 9 1.1 D
TBJB686(*)006C#@00++ 6.3 68.0 4.3 43.0 86.0 8 10 12 1.8 B
TBJC686(*)006C#@00++ 6.3 68.0 4.3 43.0 86.0 6 9 10 1.6 C
TBJD686(*)006C#@00++ CWR11DK686*@+6.3 68.0 4.3 43.0 86.0 6 9 9 0.9 D
TBJC107(*)006C#@00++ 6.3 100.0 6.3 63.0 126.0 6 9 10 0.9 C
TBJC107(*)006L#@00++ 6.3 100.0 6.3 63.0 126.0 6 9 10 0.150 C
TBJD107(*)006C#@00++ 6.3 100.0 6.3 63.0 126.0 6 9 10 0.9 D
TBJD157(*)006C#@00++ 6.3 150.0 9.5 95.0 190.0 6 9 10 0.9 D
TBJC227(*)006C#@00++ 6.3 220.0 13.9 139.0 278.0 10 12 14 1.2 C
TBJD227(*)006C#@00++ 6.3 220.0 13.9 139.0 278.0 8 10 12 0.9 D
TBJD227(*)006L#@00++ 6.3 220.0 13.9 139.0 278.0 8 10 12 0.100 D
TBJE337(*)006C#@00++ 6.3 330.0 19.8 198.0 396.0 8 10 12 0.9 E
TBJE337(*)006L#@00++ 6.3 330.0 20.8 208.0 416.0 8 10 12 0.100 E
TBJE477M006C#@00++ 6.3 470.0 29.6 296.0 592.0 10 12 14 0.9 E
TBJE477M006L#@00++ 6.3 470.0 29.6 296.0 592.0 10 12 14 0.050 E
TBJV477(*)006L#@00++ 6.3 470.0 29.6 296.0 592.0 10 12 12 0.100 V
Surface Mount Military
CWR11 - MIL-PRF-55365/8 and TBJ COTS-Plus
Part Number Designations
Following the voltage code, C designates Standard, L Designates low ESR Ratings
* = Tolerance: # = Inspection Level: @ = Failure Rate Level: + = Surge Option:
= Packaging:
M = ±20% S = Std. Conformance Weibull: B = 0.1%/1000 Hrs. For TBJ p/n: For TBJ p/n:
K = ±10% L = Group A (90% C = 0.01%/1000 Hrs. 00 = None B = Bulk
J = ±5% (Special order only) For CWR p/n: conf.) 23 = 10 cycles, +25°C R = 7" T&R
M = Military Conformance per Comm: Z = Non ER 24 = 10 cycles, -55°C & +85°C S = 13" T&R
MIL-PRF-55365 45 = 10 cycles, -55°C & +85°C before Weibull For CWR p/n:
For CWR p/n: Bulk = Standard
A = 10 cycles, +25°C \TR = 7" T&R
B = 10 cycles, -55°C & +85°C \TR13 = 13" T&R
C = 10 cycles, -55°C & +85°C before Weibull \W = Waffle
Z = None (required for CWR19 & CWR29 only)
69
Surface Mount Military
CWR11 - MIL-PRF-55365/8 and TBJ COTS-Plus
Part Number Designations
Following the voltage code, C designates Standard, L designates Low ESR Ratings
* = Tolerance: # = Inspection Level: @ = Failure Rate Level: + = Surge Option:
= Packaging:
M = ±20% S = Std. Conformance Weibull: B = 0.1%/1000 Hrs. For TBJ p/n: For TBJ p/n:
K = ±10% L = Group A (90% C = 0.01%/1000 Hrs. 00 = None B = Bulk
J = ±5% (Special order only) For CWR p/n: conf.) 23 = 10 cycles, +25°C R = 7" T&R
M = Military Conformance per Comm: Z = Non ER 24 = 10 cycles, -55°C & +85°C S = 13" T&R
MIL-PRF-55365 45 = 10 cycles, -55°C & +85°C before Weibull For CWR p/n:
For CWR p/n: Bulk = Standard
A = 10 cycles, +25°C \TR = 7" T&R
B = 10 cycles, -55°C & +85°C \TR13 = 13" T&R
C = 10 cycles, -55°C & +85°C before Weibull \W = Waffle
Z = None (required for CWR19 & CWR29 only)
DC Leakage (max) Dissipation Factor (max)
QPL Part Number DC rated Cap ESR (max) Case
AVX Part Number (for reference only) voltage (nom) +25°C +85°C +125°C +25°C +85/125°C -55°C 100 kHz Size
(85°C) µF (µA) (µA) (µA) (%) (%) (%) +25°C
(volts) (Ohms)
TBJA105(*)010C#@00++ CWR11FK105*@+10 1.0 0.5 5.0 6.0 4 6 6 10.0 A
TBJA155(*)010C#@00++ CWR11FK155*@+10 1.5 0.5 5.0 6.0 6 6 9 8.0 A
TBJA225(*)010C#@00++ CWR11FK225*@+10 2.2 0.5 5.0 6.0 6 9 9 8.0 A
TBJA335(*)010C#@00++ 10 3.3 0.5 5.0 10.0 6 9 10 5.5 A
TBJB335(*)010C#@00++ CWR11FK335*@+10 3.3 0.5 5.0 6.0 6 9 9 5.5 B
TBJA475(*)010C#@00++ 10 4.7 0.5 5.0 10.0 6 9 10 5.0 A
TBJB475(*)010C#@00++ CWR11FK475*@+10 4.7 0.5 5.0 6.0 6 9 9 4.5 B
TBJA685(*)010C#@00++ 10 6.8 0.7 7.0 14.0 6 9 10 4.0 A
TBJB685(*)010C#@00++ CWR11FK685*@+10 6.8 0.7 7.0 8.4 6 9 9 3.5 B
TBJA106(*)010C#@00++ 10 10.0 1.0 10.0 20.0 6 9 10 3.0 A
TBJA106(*)010L#@00++ 10 10.0 1.0 10.0 20.0 6 9 10 1.8 A
TBJB106(*)010C#@00++ 10 10.0 1.0 10.0 20.0 6 9 10 2.5 B
TBJC106(*)010C#@00++ 10 10.0 1.0 10.0 20.0 6 9 10 2.5 C
TBJA156(*)010C#@00++ 10 15.0 1.6 16.0 32.0 6 9 10 3.2 A
TBJB156(*)010C#@00++ 10 15.0 1.6 16.0 32.0 6 9 10 2.8 B
TBJC156(*)010C#@00++ CWR11FK156*@+10 15.0 1.5 15.0 18.0 6 6 9 2.5 C
TBJB226(*)010C#@00++ 10 22.0 2.2 22.0 44.0 6 9 10 2.4 B
TBJB226(*)010L#@00++ 10 22.0 2.2 22.0 44.0 6 9 10 0.700 B
TBJC226(*)010C#@00++ 10 22.0 2.2 22.0 44.0 6 9 10 1.0 C
TBJB336(*)010C#@00++ 10 33.0 3.3 33.0 66.0 6 9 10 1.8 B
TBJC336(*)010C#@00++ 10 33.0 3.3 33.0 66.0 6 9 10. 1.6 C
TBJD336(*)010C#@00++ CWR11FK336*@+10 33.0 3.3 33.0 39.6 6 9 9 1.1 D
TBJC476(*)010C#@00++ 10 47.0 4.7 47.0 94.0 6 9 10 1.2 C
TBJD476(*)010C#@00++ CWR11FK476*@+10 47.0 4.7 47.0 56.4 6 9 9 0.9 D
TBJC686(*)010C#@00++ 10 68.0 6.8 68.0 136.0 8 10 12 1.2 C
TBJD686(*)010C#@00++ 10 68.0 6.8 68.0 136.0 6 9 10 0.9 D
TBJC107(*)010C#@00++ 10 100.0 10.0 100.0 200.0 8 10 12 1.2 C
TBJC107(*)010L#@00++ 10 100.0 10.0 100.0 200.0 8 10 12 0.200 C
TBJD107(*)010C#@00++ 10 100.0 10.0 100.0 200.0 6 9 10 0.9 D
TBJD107(*)010L#@00++ 10 100.0 10.0 100.0 200.0 6 9 10 0.100 D
TBJD157(*)010C#@00++ 10 150.0 15.0 150.0 300.0 8 10 12 0.9 D
TBJD157(*)010L#@00++ 10 150.0 15.0 150.0 300.0 8 10 12 0.100 D
TBJD227M010C#@00++ 10 220.0 22.0 220.0 440.0 8 10 12 0.9 D
TBJD227M010L#@00++ 10 220.0 22.0 220.0 440.0 8 10 12 0.150 D
TBJE227(*)010C#@00++ 10 220.0 22.0 220.0 440.0 8 10 12 0.9 E
TBJE227(*)010L#@00++ 10 220.0 22.0 220.0 440.0 8 10 12 0.100 E
TBJD337M010C#@00++ 10 330.0 33.0 330.0 660.0 8 10 12 0.9 D
TBJD337M010L#@00++ 10 330.0 33.0 330.0 660.0 8 10 12 0.150 D
TBJE337(*)010C#@00++ 10 330.0 33.0 330.0 660.0 8 10 12 0.9 E
TBJE337(*)010L#@00++ 10 330.0 33.0 330.0 660.0 8 10 12 0.060 E
TBJV337(*)010L#@00++ 10 330.0 33.0 330.0 660.0 8 10 12 0.100 V
TBJE477M010C#@00++ 10 470.0 47.0 470.0 940.0 10 12 14 0.9 E
TBJE477M010L#@00++ 10 470.0 47.0 470.0 940.0 10 12 14 0.050 E
TBJV477(*)010L#@00++ 10 470.0 47.0 470.0 940.0 10 12 14 0.100 V
70
DC Leakage (max) Dissipation Factor (max)
QPL Part Number DC rated Cap ESR (max) Case
AVX Part Number (for reference only) voltage (nom) +25°C +85°C +125°C +25°C +85/125°C -55°C 100 kHz Size
(85°C) µF (µA) (µA) (µA) (%) (%) (%) +25°C
(volts) (Ohms)
TBJA684(*)016C#@00++ CWR11HK684*@+16 0.68 0.5 5.0 6.0 4 6 6 12.0 A
TBJA105(*)016C#@00++ CWR11HK105*@+16 1.0 0.5 5.0 6.0 4 6 6 10.0 A
TBJA155(*)016C#@00++ CWR11HK155*@+16 1.5 0.5 5.0 6.0 6 9 9 8.0 A
TBJA225(*)016C#@00++ 16 2.2 0.5 5.0 10.0 6 9 10 5.5 A
TBJB225(*)016C#@00++ CWR11HK225*@+16 2.2 0.5 5.0 6.0 6 9 9 5.0 B
TBJA335(*)016C#@00++ 16 3.3 0.5 5.0 10.0 6 9 10 5.0 A
TBJA335(*)016L#@00++ 16 3.3 0.5 5.0 10.0 6 9 10 3.5 A
TBJB335(*)016C#@00++ CWR11HK335*@+16 3.3 0.5 5.0 6.0 6 8 9 5.0 B
TBJA475(*)016C#@00++ 16 4.7 0.8 8.0 16.0 6 9 10 4.0 A
TBJB475(*)016C#@00++ CWR11HK475*@+16 4.7 0.7 7.0 8.4 6 9 9 4.0 B
TBJA685(*)016C#@00++ 16 6.8 1.1 11.0 22.0 6 9 10 2.5 A
TBJB685(*)016C#@00++ 16 6.8 1.1 11.0 22.0 6 9 10 2.5 B
TBJC685(*)016C#@00++ 16 6.8 1.1 11.0 22.0 6 9 10 2.5 C
TBJB106(*)016C#@00++ 16 10.0 1.6 16.0 32.0 6 9 10 2.8 B
TBJC106(*)016C#@00++ CWR11HK106*@+16 10.0 1.6 16.0 19.2 6 8 9 2.5 C
TBJB156(*)016C#@00++ 16 15.0 2.4 24.0 48.0 6 9 10 2.5 B
TBJB156(*)016L#@00++ 16 15.0 2.4 24.0 48.0 6 9 10 0.800 B
TBJC156(*)016C#@00++ 16 15.0 2.4 24.0 48.0 6 9 10 1.8 C
TBJB226(*)016C#@00++ 16 22.0 3.6 36.0 72.0 6 9 10 2.3 B
TBJC226(*)016C#@00++ 16 22.0 3.6 36.0 72.0 6 9 10 1.6 C
TBJC226(*)016L#@00++ 16 22.0 3.6 36.0 72.0 6 9 10 0.375 C
TBJD226(*)016C#@00++ CWR11HK226*@+16 22.0 3.3 33.0 39.6 6 8 9 1.1 D
TBJC336(*)016C#@00++ 16 33.0 5.3 53.0 106.0 6 9 10 1.5 C
TBJC336(*)016L#@00++ 16 33.0 5.3 53.0 106.0 6 9 10 0.300 C
TBJD336(*)016C#@00++ CWR11HK336*@+16 33.0 5.3 53.0 106.0 6 9 9 0.9 D
TBJC476(*)016C#@00++ 16 47.0 7.6 76.0 152.0 6 9 10 1.5 C
TBJC476(*)016L#@00++ 16 47.0 7.6 76.0 152.0 6 9 10 0.350 C
TBJD476(*)016C#@00++ 16 47.0 7.6 76.0 152.0 6 9 10 0.9 D
TBJD476(*)016L#@00++ 16 47.0 7.6 76.0 152.0 6 9 10 0.150 D
TBJD686(*)016C#@00++ 16 68.0 10.9 109.0 218.0 6 9 10 0.9 D
TBJD107(*)016C#@00++ 16 100.0 16.0 160.0 320.0 6 9 10 0.9 D
TBJD107(*)016L#@00++ 16 100.0 16.0 160.0 320.0 6 9 10 0.125 D
TBJE107(*)016C#@00++ 16 100.0 16.0 160.0 320.0 6 9 10 0.9 E
TBJE107(*)016L#@00++ 16 100.0 16.0 160.0 320.0 6 9 10 0.100 E
TBJD157M016C#@00++ 16 150.0 24.0 240.0 480.0 6 9 10 0.9 D
TBJD157M016L#@00++ 16 150.0 24.0 240.0 480.0 6 9 10 0.150 D
TBJV157(*)016L#@00++ 16 150.0 24.0 480.0 960.0 6 8 10 0.045 V
TBJV227(*)016L#@00++ 16 220.0 35.2 352.0 704.0 8 10 12 0.150 V
Surface Mount Military
CWR11 - MIL-PRF-55365/8 and TBJ COTS-Plus
Part Number Designations
Following the voltage code, C designates Standard, L designates Low ESR Ratings
* = Tolerance: # = Inspection Level: @ = Failure Rate Level: + = Surge Option:
= Packaging:
M = ±20% S = Std. Conformance Weibull: B = 0.1%/1000 Hrs. For TBJ p/n: For TBJ p/n:
K = ±10% L = Group A (90% C = 0.01%/1000 Hrs. 00 = None B = Bulk
J = ±5% (Special order only) For CWR p/n: conf.) 23 = 10 cycles, +25°C R = 7" T&R
M = Military Conformance per Comm: Z = Non ER 24 = 10 cycles, -55°C & +85°C S = 13" T&R
MIL-PRF-55365 45 = 10 cycles, -55°C & +85°C before Weibull For CWR p/n:
For CWR p/n: Bulk = Standard
A = 10 cycles, +25°C \TR = 7" T&R
B = 10 cycles, -55°C & +85°C \TR13 = 13" T&R
C = 10 cycles, -55°C & +85°C before Weibull \W = Waffle
Z = None (required for CWR19 & CWR29 only)
71
DC Leakage (max) Dissipation Factor (max)
QPL Part Number DC rated Cap ESR (max) Case
AVX Part Number (for reference only) voltage (nom) +25°C +85°C +125°C +25°C +85/125°C -55°C 100 kHz Size
(85°C) µF (µA) (µA) (µA) (%) (%) (%) +25°C
(volts) (Ohms)
TBJA474(*)020C#@00++ CWR11JK474*@+20 0.47 0.5 5.0 6.0 4 6 6 14.0 A
TBJA684(*)020C#@00++ CWR11JK684*@+20 0.68 0.5 5.0 6.0 4 6 6 12.0 A
TBJA105(*)020C#@00++ CWR11JK105*@+20 1.0 0.5 5.0 6.0 4 6 6 10.0 A
TBJA155(*)020C#@00++ 20 1.5 0.5 5.0 10.0 6 8 10 6.5 A
TBJB155(*)020C#@00++ CWR11JK155*@+20 1.5 0.5 5.0 6.0 6 9 9 6.0 B
TBJB225(*)020C#@00++ CWR11JK225*@+20 2.2 0.5 5.0 6.0 6 8 9 5.0 B
TBJB335(*)020C#@00++ CWR11JK335*@+20 3.3 0.7 7.0 8.4 6 9 9 4.0 B
TBJA475(*)020C#@00++ 20 4.7 1.0 10.0 20.0 6 8 10 4.0 A
TBJA475(*)020L#@00++ 20 4.7 1.0 10.0 20.0 6 8 10 1.8 A
TBJB475(*)020C#@00++ 20 4.7 2.0 20.0 40.0 6 8 10 3.0 B
TBJC475(*)020C#@00++ CWR11JK475*@+20 4.7 1.0 10.0 12.0 6 8 9 3.0 C
TBJB685(*)020C#@00++ 20 6.8 1.4 14.0 28.0 6 8 10 2.5 B
TBJC685(*)020C#@00++ CWR11JK685*@+20 6.8 1.4 14.0 16.8 6 9 9 2.4 C
TBJB106(*)020C#@00++ 20 10.0 0.7 7.0 14.0 6 8 10 2.1 B
TBJB106(*)020L#@00++ 20 10.0 0.7 7.0 14.0 6 8 10 1.0 B
TBJC106(*)020C#@00++ 20 10.0 1.4 14.0 28.0 6 8 10 1.9 C
TBJB156(*)020C#@00++ 20 15.0 3.0 30.0 60.0 6 8 10 2.0 B
TBJC156(*)020C#@00++ 20 15.0 3.0 30.0 60.0 6 8 10 1.7 C
TBJD156(*)020C#@00++ CWR11JK156*@+20 15.0 3.0 30.0 36.0 6 8 9 1.1 D
TBJC226(*)020C#@00++ 20 22.0 4.4 44.0 88.0 6 8 10 1.6 C
TBJD226(*)020C#@00++ CWR11JK226*@+20 22.0 4.4 44.0 52.8 6 9 9 0.9 D
TBJC336(*)020C#@00++ 20 33.0 6.6 66.0 132.0 6 8 10 1.5 C
TBJD336(*)020C#@00++ 20 33.0 6.6 66.0 132.0 6 8 10 0.9 D
TBJD336(*)020L#@00++ 20 33.0 6.6 66.0 132.0 6 8 10 0.200 D
TBJD476(*)020C#@00++ 20 47.0 9.4 94.0 188.0 6 8 10 0.9 D
TBJD686(*)020C#@00++ 20 68.0 13.6 136.0 272.0 6 8 10 0.9 D
TBJE686(*)020C#@00++ 20 68.0 13.6 136.0 272.0 6 8 10 0.9 E
TBJE686(*)020L#@00++ 20 68.0 13.6 136.0 272.0 6 8 10 0.150 E
TBJV107(*)020L#@00++ 20 100.0 20.0 200.0 400.0 8 10 12 0.200 V
TBJA334(*)025C#@00++ CWR11KK334*@+25 0.33 0.5 5.0 6.0 4 6 6 15.0 A
TBJA474(*)025C#@00++ CWR11KK474*@+25 0.47 0.5 5.0 6.0 4 6 6 14.0 A
TBJA684M025C#@00++ 25 0.68 0.5 5.0 10.0 4 6 8 10.0 A
TBJB684(*)025C#@00++ CWR11KK684*@+25 0.68 0.5 5.0 6.0 4 6 6 7.5 B
TBJA105(*)025C#@00++ 25 1.0 0.5 5.0 10.0 4 6 8 8.0 A
TBJB105(*)025C#@00++ CWR11KK105*@+25 1.0 0.5 5.0 6.0 4 6 6 6.5 B
TBJA155(*)025C#@00++ 25 1.5 0.5 5.0 10.0 6 8 10 7.5 A
TBJA155(*)025L#@00++ 25 1.5 0.5 5.0 10.0 6 8 10 3.0 A
TBJB155(*)025C#@00++ CWR11KK155*@+25 1.5 0.5 5.0 6.0 6 8 9 6.5 B
TBJA225(*)025C#@00++ 25 2.2 0.5 5.0 10.0 6 8 10 7.0 A
TBJB225(*)025C#@00++ 25 2.2 0.5 5.0 10.0 6 8 10 4.5 B
TBJC225(*)025C#@00++ CWR11KK225*@+25 2.2 0.6 6.0 7.2 6 9 9 3.5 C
TBJB335(*)025C#@00++ 25 3.3 0.5 5.0 10.0 6 8 10 3.5 B
TBJC335(*)025C#@00++ CWR11KK335*@+25 3.3 0.9 9.0 10.8 6 8 9 3.5 C
TBJB475(*)025C#@00++ 25 4.7 1.2 12.0 24.0 6 8 10 2.8 B
TBJB475(*)025L#@00++ 25 4.7 1.2 12.0 24.0 6 8 10 1.5 B
TBJC475(*)025C#@00++ CWR11KK475*@+25 4.7 1.2 12.0 14.4 6 9 9 2.5 C
TBJB685(*)025C#@00++ 25 6.8 1.7 17.0 34.0 6 8 10 2.8 B
TBJC685(*)025C#@00++ 25 6.8 1.7 17.0 34.0 6 8 10 2.0 C
TBJD685(*)025C#@00++ CWR11KK685*@+25 6.8 1.7 17.0 20.4 6 9 9 1.4 D
TBJC106(*)025C#@00++ 25 10.0 2.5 25.0 50.0 6 8 10 1.8 C
TBJC106(*)025L#@00++ 25 10.0 2.5 25.0 50.0 6 8 10 0.500 C
TBJD106(*)025C#@00++ CWR11KK106*@+25 10.0 2.5 25.0 30.0 6 8 9 1.2 D
TBJD156(*)025C#@00++ CWR11KK156*@+25 15.0 3.8 38.0 45.6 6 9 9 1.0 D
TBJC226(*)025C#@00++ 25 22.0 5.5 55.0 110.0 6 8 10 1.4 C
TBJD226(*)025C#@00++ 25 22.0 5.5 55.0 110.0 6 8 10 0.9 D
TBJD226(*)025L#@00++ 25 22.0 5.5 55.0 110.0 6 8 10 0.200 D
TBJD336(*)025C#@00++ 25 33.0 8.3 83.0 166.0 6 8 10 0.9 D
TBJE336(*)025C#@00++ 25 33.0 8.3 83.0 166.0 6 8 10 0.9 E
TBJE336(*)025L#@00++ 25 33.0 8.3 83.0 166.0 6 8 10 0.300 E
TBJD476M025C#@00++ 25 47.0 11.8 118.0 236.0 6 8 10 0.9 D
TBJD476M025L#@00++ 25 47.0 11.8 118.0 236.0 6 8 10 0.250 D
TBJV686(*)025L#@00++ 25 68.0 17.0 170.0 340.0 8 10 12 0.150 V
Surface Mount Military
CWR11 - MIL-PRF-55365/8 and TBJ COTS-Plus
Part Number Designations
Following the voltage code, C designates Standard, L Designates low ESR Ratings
* = Tolerance: # = Inspection Level: @ = Failure Rate Level: + = Surge Option:
= Packaging:
M = ±20% S = Std. Conformance Weibull: B = 0.1%/1000 Hrs. For TBJ p/n: For TBJ p/n:
K = ±10% L = Group A (90% C = 0.01%/1000 Hrs. 00 = None B = Bulk
J = ±5% (Special order only) For CWR p/n: conf.) 23 = 10 cycles, +25°C R = 7" T&R
M = Military Conformance per Comm: Z = Non ER 24 = 10 cycles, -55°C & +85°C S = 13" T&R
MIL-PRF-55365 45 = 10 cycles, -55°C & +85°C before Weibull For CWR p/n:
For CWR p/n: Bulk = Standard
A = 10 cycles, +25°C \TR = 7" T&R
B = 10 cycles, -55°C & +85°C \TR13 = 13" T&R
C = 10 cycles, -55°C & +85°C before Weibull \W = Waffle
Z = None (required for CWR19 & CWR29 only)
72
DC Leakage (max) Dissipation Factor (max)
QPL Part Number DC rated Cap ESR (max) Case
AVX Part Number (for reference only) voltage (nom) +25°C +85°C +125°C +25°C +85/125°C -55°C 100 kHz Size
(85°C) µF (µA) (µA) (µA) (%) (%) (%) +25°C
(volts) (Ohms)
TBJA104(*)035C#@00++ CWR11MK104*@+35 0.1 0.5 5.0 6.0 4 6 6 24.0 A
TBJA154(*)035C#@00++ CWR11MK154*@+35 0.15 0.5 5.0 6.0 4 6 6 21.0 A
TBJA224(*)035C#@00++ CWR11MK224*@+35 0.22 0.5 5.0 6.0 4 6 6 18.0 A
TBJA334(*)035C#@00++ CWR11MK334*@+35 0.33 0.5 5.0 6.0 4 6 6 15.0 A
TBJA474M035C#@00++ 35 0.47 0.5 5.0 10.0 4 6 8 12.0 A
TBJB474(*)035C#@00++ CWR11MK474*@+35 0.47 0.5 5.0 6.0 4 6 6 10.0 B
TBJA684M035C#@00++ 35 0.68 0.5 5.0 10.0 4 6 8 8.0 A
TBJB684(*)035C#@00++ CWR11MK684*@+35 0.68 0.5 5.0 6.0 4 6 6 8.0 B
TBJA105(*)035C#@00++ 35 1.00 0.5 5.0 10.0 4 6 6 7.5 A
TBJB105(*)035C#@00++ CWR11MK105*@+35 1.0 0.5 5.0 6.0 4 6 6 6.5 B
TBJA155(*)035C#@00++ 35 1.5 0.5 5.0 10.0 6 8 9 7.5 A
TBJB155(*)035C#@00++ 35 1.5 0.5 5.0 10.0 6 8 9 5.2 B
TBJC155(*)035C#@00++ CWR11MK155*@+35 1.5 0.5 5.0 6.0 6 8 9 4.5 C
TBJB225(*)035C#@00++ 35 2.2 0.8 8.0 16.0 6 8 9 4.2 B
TBJC225(*)035C#@00++ CWR11MK225*@+35 2.2 0.8 8.0 9.6 6 8 9 3.5 C
TBJB335(*)035C#@00++ 35 3.3 1.2 12.0 24.0 6 8 9 3.5 B
TBJC335(*)035C#@00++ CWR11MK335*@+35 3.3 1.2 12.0 14.4 6 8 9 2.5 C
TBJB475(*)035C#@00++ 35 4.7 1.6 16.0 32.0 6 8 9 3.1 B
TBJC475(*)035C#@00++ 35 4.7 1.6 16.0 32.0 6 8 9 2.2 C
TBJC475(*)035L#@00++ 35 4.7 1.6 16.0 32.0 6 8 9 0.600 C
TBJD475(*)035C#@00++ CWR11MK475*@+35 4.7 1.7 17.0 20.4 6 8 9 1.5 D
TBJC685(*)035C#@00++ 35 6.8 2.4 24.0 48.0 6 9 9 1.8 C
TBJD685(*)035C#@00++ CWR11MK685*@+35 6.8 2.4 24.0 28.8 6 9 9 1.3 D
TBJC106(*)035C#@00++ 35 10.0 3.5 35.0 70.0 6 9 9 1.6 C
TBJD106(*)035C#@00++ 35 10.0 3.5 35.0 70.0 6 9 9 1.0 D
TBJD106(*)035L#@00++ 35 10.0 3.5 35.0 70.0 6 9 9 0.300 D
TBJC156(*)035C#@00++ 35 15.0 5.3 53.0 106.0 6 9 9 1.4 C
TBJD156(*)035C#@00++ 35 15.0 5.3 53.0 106.0 6 9 9 0.9 D
TBJD156(*)035L#@00++ 35 15.0 5.3 53.0 106.0 6 9 9 0.300 D
TBJD226(*)035C#@00++ 35 22.0 7.7 77.0 154.0 6 9 9 0.9 D
TBJD226(*)035L#@00++ 35 22.0 7.7 77.0 154.0 6 9 9 0.400 D
TBJE226(*)035C#@00++ 35 22.0 7.7 77.0 154.0 6 9 9 0.9 E
TBJE226(*)035L#@00++ 35 22.0 7.7 77.0 154.0 6 9 9 0.300 E
TBJD336M035C#@00++ 35 33.0 11.6 116.0 232.0 6 9 9 0.9 D
TBJD336M035L#@00++ 35 33.0 11.6 116.0 232.0 6 9 9 0.300 D
TBJA104(*)050C#@00++ CWR11NK104*@+50 0.10 0.5 5.0 12.0 6 8 8 22.0 A
TBJA154M050C#@00++ 50 0.15 0.5 5.0 10.0 4 6 6 21.0 A
TBJB154(*)050C#@00++ CWR11NK154*@+50 0.15 0.5 5.0 6.0 4 6 6 17.0 B
TBJA224M050C#@00++ 50 0.22 0.5 5.0 10.0 4 6 6 18.0 A
TBJB224(*)050C#@00++ CWR11NK224*@+50 0.22 0.5 5.0 6.0 4 6 6 14.0 B
TBJB334(*)050C#@00++ CWR11NK334*@+50 0.33 0.5 5.0 6.0 4 6 6 12.0 B
TBJC474(*)050C#@00++ CWR11NK474*@+50 0.47 0.5 5.0 6.0 4 6 6 8.0 C
TBJC684(*)050C#@00++ CWR11NK684*@+50 0.68 0.5 5.0 6.0 4 6 6 7.0 C
TBJC105(*)050C#@00++ CWR11NK105*@+50 1.0 0.5 5.0 6.0 4 6 6 6.0 C
TBJC155(*)050C#@00++ 50 1.5 0.8 8.0 16.0 6 8 9 5.0 C
TBJD155(*)050C#@00++ CWR11NK155*@+50 1.5 0.8 8.0 9.6 6 8 9 4.0 D
TBJD225(*)050C#@00++ CWR11NK225*@+50 2.2 1.1 11.0 13.2 6 8 9 2.5 D
TBJD335(*)050C#@00++ CWR11NK335*@+50 3.3 1.7 17.0 20.4 6 9 9 2.0 D
TBJD475(*)050C#@00++ CWR11NK475*@+50 4.7 2.4 24.0 28.8 6 9 9 1.5 D
TBJD685(*)050C#@00++ 50 6.8 3.4 34.0 68.0 6 6 6 1.0 D
Surface Mount Military
CWR11 - MIL-PRF-55365/8 and TBJ COTS-Plus
* = Tolerance: # = Inspection Level: @ = Failure Rate Level: + = Surge Option:
= Packaging:
M = ±20% S = Std. Conformance Weibull: B = 0.1%/1000 Hrs. For TBJ p/n: For TBJ p/n:
K = ±10% L = Group A (90% C = 0.01%/1000 Hrs. 00 = None B = Bulk
J = ±5% (Special order only) For CWR p/n: conf.) 23 = 10 cycles, +25°C R = 7" T&R
M = Military Conformance per Comm: Z = Non ER 24 = 10 cycles, -55°C & +85°C S = 13" T&R
MIL-PRF-55365 45 = 10 cycles, -55°C & +85°C before Weibull For CWR p/n:
For CWR p/n: Bulk = Standard
A = 10 cycles, +25°C \TR = 7" T&R
B = 10 cycles, -55°C & +85°C \TR13 = 13" T&R
C = 10 cycles, -55°C & +85°C before Weibull \W = Waffle
Z = None (required for CWR19 & CWR29 only)
Following the voltage code, C designates Standard, L Designates low ESR Ratings
Part Number Designations
73
Case Length (L) Width (W) Height (H) Te rm. Width (W1)
Code ±0.10 (±0.004)
L1.60+0.25/-0.15 0.85+0.20/-0.10 0.85+0.20/-0.10 0.15+0.35/-0.00
(0.063+0.010/-0.006) (0.033+0.008/-0.004) (0.033+0.008/-0.004) (0.006+0.014/-0.000)
R2.00+0.25/-0.15 1.35+0.20/-0.10 1.35+0.20/-0.10 0.15+0.35/-0.00
(0.079+0.010/-0.006) (0.053+0.008/-0.004) (0.053+0.008/-0.004) (0.006+0.014/-0.000)
A3.20±0.20 1.60±0.20 1.60±0.20 0.15+0.35/-0.00
(0.126±0.008) (0.063±0.008) (0.063±0.008) (0.006+0.014/-0.000)
TBC Series
CWR15 Military Approved Microchip
AVX announces the world’s smallest
military approved tantalum chip capac-
itors. The CWR15 offers 0603, 0805
and 1206 case sizes in capacitance/
voltage combinations previously only
available in much larger packages.
The revolutionary AVX TACmicrochip
technology offers designers significant
opportunity to downsize circuits for
military and aerospace applications.
The product is manufactured in the
AVX Tantalum high reliability facility in
Biddeford, Maine which is also home
to the CWR09, CWR11, CWR19 and
CWR29 product lines.
CASE DIMENSIONS: millimeters (inches)
H
L
W
PP
POLARITY BAND NOT TO
EXCEED 75% OF BODY
CWR15 F K 225 M B L B
PART NUMBERING SYSTEM
Style
Tantalum
Chip
Capacitor
Voltage
C = 4Vdc
D = 6Vdc
F = 10Vdc
Termination
Finish
Solder Fused
Capacitance
Code
pF code: 1st two
digits represent
significant figures
3rd digit represents
number of zeros to
follow
Surge
Current
Option
A = +25°C after
Weibull
B = -55°C to +85°C
after Weibull
C = -55°C to +85°C
before Weibull
Case
Size
L
R
A
Product
Level
Designator
Weibull FRL
B = 0.1
C = 0.01
D = 0.001
Capacitance
Tolerance
J = ±5%
K = ±10%
M = ±20%
AVAILABLE RANGES (LETTER DENOTES CASE SIZE)
Further extensions of the CWR15 product are planned for later in 2005. A new case size will be added, and the voltage range will be
extended to 20 volts. Ratings of 100µF at 4 volts to 10µF at 20 volts will be included in this extension of the product line.
Capacitance Voltage Rating DC (VR) at 85°C
Cap. (µF) Code 4V 6V 10V 15V 20V
0.47 474
0.68 684
1.0 105
1.5 155
2.2 225 L
3.3 335 R/L
4.7 475 L R
6.8 685 L R R
10 106 R R R
15 156 R R A
22 226 R R
33 336 R A
47 476 A A
68 686 A
74
NOS
Low ESR, 125°C
Pages 80-83
NRJ
Professional
Low ESR Polymer
Conventional
Low ESR Polymer
Multianodes
High CV
Range Extension
DCL 0.01CV
NOJ
General Purpose
105°C Capacitors
Pages 75-77
Low Profile
1.2, 1.5, 2.0 mm Height
Pages 78-79
TACmicrochip™
Smallest Dimensions
in 0402, 0603, 0805
Low ESR Development
Released
Released
ReleasedDevelopment
NOM
Low ESR
Multianodes
Pages 84-85
Released
Under
Development
Specification and
Matrix Development
Section 2: Niobium Oxide Capacitors*
OxiCap™ NOJ, NOS, NOM Series
DEVELOPMENT ROADMAP
*Niobium Oxide Capacitors are manufactured and sold under patent
license from Cabot Corporation, Boyertown, Pennsylvania U.S.A.
75
NOJ
Type
D
Case Size
107
Capacitance Code
1st two digits
represent significant
figures, 3rd digit
represents multiplier
in pF
M
Capacitance
Tolerance
M = ±20%
006
Rated DC Voltage
001 = 1.8Vdc
002 = 2.5Vdc
004 = 4Vdc
006 = 6.3Vdc
010 = 10Vdc
RWJ
Packaging
R = Lead Free
7" Reel
S = Lead Free
13" Reel
OxiCap™ NOJ Series
Niobium Oxide Capacitor
Cost versus Performance is a key
requirement for consumer electronic
products. A new solid electrolyte capaci-
tor OxiCap™ has been developed by
AVX in standard EIA case sizes in order
to meet this requirement as a higher
performance alternative to aluminum
and other SMT capacitor technologies
currently on the market. The OxiCap™
non-burn1technology is based on NbO
niobium oxide ceramic material as
the anodic material processed through
the same manufacturing process as
tantalum capacitors. Nb2O5dielectric in
combination to self-healing MnO2cathode
is a basis for a good reliability level
0.5%/1000 hrs. within a temperature
range up to 105°C and rated voltage <6V
(rail voltage <5V). Electrical parameters
are similar to general tantalum specifica-
tions. NbO and MnO2are widely available
materials. The laser coded orange
molded body gives total traceability.
• Reduced Voltage Derating
• Failed OxiCapTM will not burn up to
category voltage
L
SAAW
1
W
H
HOW TO ORDER
Technical Data: All technical data relate to an ambient temperature of +25°C is not stated
Capacitance Range: 4.7µF to 1500µF
Capacitance Tolerance: ±20%
Leakage Current DCL: 0.02CV
Rated Voltage DC (VR)
+85°C: 1.8 2.5 4 6.3 10
Category Voltage (VC)
+105°C: 1.2 1.7 2.7 4 7
Surge Voltage (VS)
+85°C: 2.3 3.3 5.2 8 13
+105°C: 1.6 2.2 3.4 5 8
Temperature Range: -55°C to +105°C
Reliability: 0.5% per 1000 hours at 85°C,
VR
, 0.1Ω/V series impedance, 60% confidence level
Meets requirements of AEC-Q200
Code EIA L±0.20 (0.008) W+0.20 (0.008) H+0.20 (0.008) W1±0.20 A+0.30 (0.012) S Min.
Code –0.10 (0.004) –0.10 (0.004) (0.008) –0.20 (0.008)
A3216-18 3.20 (0.126) 1.60 (0.063) 1.60 (0.063) 1.20 (0.047) 0.80 (0.031) 1.10 (0.043)
B3528-21 3.50 (0.138) 2.80 (0.110) 1.90 (0.075) 2.20 (0.087) 0.80 (0.031) 1.40 (0.055)
C6032-28 6.00 (0.236) 3.20 (0.126) 2.60 (0.102) 2.20 (0.087) 1.30 (0.051) 2.90 (0.114)
D7343-31 7.30 (0.287) 4.30 (0.169) 2.90 (0.114) 2.40 (0.094) 1.30 (0.051) 4.40 (0.173)
E7343-43 7.30 (0.287) 4.30 (0.169) 4.10 (0.162) 2.40 (0.094) 1.30 (0.051) 4.40 (0.173)
V7361-38 7.30 (0.287) 6.10 (0.240) 3.45 ±0.30 3.10 (0.120) 1.40 (0.055) 4.40 (0.173)
(0.136±0.012)
Z* 7361-45 7.30 (0.287) 6.10 (0.240) 4.30 (0.169) 3.10 (0.120) 1.40 (0.055) 4.40 (0.173)
W1dimension applies to the termination width for A dimensional area only. *-under development
CASE DIMENSIONS: millimeters (inches)
TECHNICAL SPECIFICATIONS
76
OxiCap™ NOJ Series
Niobium Oxide Capacitor
Capacitance
Rated Voltage DC (
VR
) to 85°C / 0.66 DC to 105°C / 0.5 DC to 125ºC
Cap. (µF) Code 1.8V (x) 2.5V (e) 4V (G) 6.3V (J) 10V (A)
4.7 475 A A
6.8 685 A A
10 106 A A/B
15 156 A B B
22 226 A A/B B B/C
33 336 AA/B B B/C C
47 476 A/B B B/C C C
68 686 B B/C B/C C D
100 107 B/C B/C C C/D D
150 157 B/C C C/D C/D E
220 227 C C C/D D/E V
330 337 CC/D D E
470 477 C/D D/E D/E V
680 687 DEV Z
1000 108 EVZ
1500 158 VZ
2200 228 Z
Developmental Ratings - subject to change Z case = 4.5mm height V
CAPACITANCE AND RATED VOLTAGE RANGE
(LETTER DENOTES CASE SIZE)
LEAD-FREE COMPATIBLE
COMPONENT
ENVIRONMENTAL FRIENDLY
COMPONENT
NON-BURN
NON-SMOKE
77
OxiCap™ NOJ Series
Niobium Oxide Capacitor
Rated DCL DF ESR 100kHz Ripple Current (A) 100kHz Ripple Voltage (V)
AVX Case Capacitance Voltage (µA) % Max. (Ω)
Part No. Size (µF) (V) Max. Max. @100kHz 25ºC 85ºC 105ºC 25ºC 85ºC 105ºC
1.8 Volt @ 85°C (1.2 Volt @ 105°C)
NOJB476M001# B 47 1.8 1.7 6 1.6 0.252 0.227 0.101 0.404 0.364 0.162
NOJB686M001# B 68 1.8 2.5 6 1.5 0.261 0.235 0.104 0.391 0.352 0.156
NOJB107M001# B 100 1.8 3.6 6 1.4 0.270 0.243 0.108 0.378 0.340 0.151
NOJC107M001# C 100 1.8 3.6 6 0.4 0.574 0.517 0.230 0.230 0.207 0.092
NOJC157M001# C 150 1.8 5.4 8 0.4 0.574 0.517 0.230 0.230 0.207 0.092
NOJC227M001# C 220 1.8 8.0 8 0.4 0.574 0.517 0.230 0.230 0.207 0.092
2.5 Volt @ 85°C (1.7 Volt @ 105°C)
NOJA226M002# A 22 2.5 1.1 6 1.9 0.218 0.196 0.087 0.414 0.372 0.165
NOJA336M002# A 33 2.5 1.7 6 1.7 0.230 0.207 0.092 0.391 0.352 0.156
NOJB336M002# B 33 2.5 1.7 6 1.7 0.245 0.220 0.098 0.416 0.375 0.167
NOJB476M002# B 47 2.5 2.4 6 1.6 0.252 0.227 0.101 0.404 0.364 0.162
NOJC686M002# C 68 2.5 3.4 6 0.5 0.514 0.462 0.206 0.257 0.231 0.103
NOJC107M002# C 100 2.5 5.0 6 0.4 0.574 0.517 0.230 0.230 0.207 0.092
NOJC157M002# C 150 2.5 7.5 6 0.4 0.574 0.517 0.230 0.230 0.207 0.092
NOJC227M002# C 220 2.5 11.0 8 0.4 0.574 0.517 0.230 0.230 0.207 0.092
NOJD337M002# D 330 2.5 16.5 10 0.3 0.775 0.697 0.310 0.232 0.209 0.093
NOJD477M002# D 470 2.5 23.5 10 0.3 0.775 0.697 0.310 0.323 0.209 0.093
NOJE477M002# E 470 2.5 23.5 10 0.3 0.812 0.731 0.325 0.244 0.219 0.097
NOJE687M002# E 680 2.5 34.0 12 0.3 0.812 0.731 0.325 0.244 0.219 0.097
NOJV108M002# V 1000 2.5 50.0 18 0.3 1.000 0.900 0.400 0.300 0.270 0.120
4 Volt @ 85°C (2.7 Volt @ 105°C)
NOJA156M004# A 15 4 1.2 6 2 0.212 0.191 0.085 0.424 0.382 0.170
NOJA226M004# A 22 4 1.8 6 1.9 0.218 0.196 0.087 0.414 0.372 0.165
NOJB226M004# B 22 4 1.8 6 1.9 0.232 0.209 0.093 0.440 0.396 0.176
NOJB336M004# B 33 4 2.6 6 1.7 0.245 0.220 0.098 0.416 0.375 0.167
NOJB476M004# B 47 4 3.8 6 1.6 0.252 0.227 0.101 0.404 0.364 0.162
NOJC476M004# C 47 4 3.8 6 0.5 0.514 0.462 0.206 0.257 0.231 0.103
NOJC686M004# C 68 4 5.4 6 0.5 0.514 0.462 0.206 0.257 0.231 0.103
NOJC107M004# C 100 4 8.0 6 0.4 0.574 0.517 0.230 0.230 0.207 0.092
NOJC157M004# C 150 4 12.0 6 0.4 0.574 0.517 0.230 0.230 0.207 0.092
NOJD157M004# D 150 4 12.0 6 0.3 0.775 0.697 0.310 0.232 0.209 0.093
NOJD227M004# D 220 4 17.6 8 0.4 0.671 0.604 0.268 0.268 0.241 0.107
NOJD337M004# D 330 4 26.4 8 0.3 0.775 0.697 0.310 0.232 0.209 0.093
NOJE477M004# E 470 4 37.6 12 0.3 0.812 0.731 0.325 0.244 0.219 0.097
NOJV687M004# V 680 4 54.4 14 0.3 1.000 0.900 0.400 0.300 0.270 0.120
6.3 Volt @ 85°C (4 Volt @ 105°C)
NOJA475M006# A 4.7 6.3 1.1 6 3.1 0.170 0.153 0.068 0.528 0.475 0.211
NOJA685M006# A 6.8 6.3 1.1 6 2.6 0.186 0.167 0.074 0.484 0.435 0.193
NOJA106M006# A 10 6.3 1.2 6 2.2 0.202 0.182 0.081 0.445 0.400 0.178
NOJB156M006# B 15 6.3 1.8 6 2 0.226 0.203 0.090 0.452 0.406 0.181
NOJB226M006# B 22 6.3 2.6 6 1.9 0.232 0.209 0.093 0.440 0.396 0.176
NOJB336M006# B 33 6.3 4.0 6 1.7 0.245 0.220 0.098 0.416 0.375 0.167
NOJC336M006# C 33 6.3 4.0 6 0.5 0.514 0.462 0.206 0.257 0.231 0.103
NOJC476M006# C 47 6.3 5.7 6 0.5 0.514 0.462 0.206 0.257 0.231 0.103
NOJC686M006# C 68 6.3 8.2 6 0.5 0.514 0.462 0.206 0.257 0.231 0.103
NOJC107M006# C 100 6.3 12.0 8 0.4 0.574 0.517 0.230 0.230 0.207 0.092
NOJD107M006# D 100 6.3 12.0 6 0.4 0.671 0.604 0.268 0.268 0.241 0.107
NOJD157M006# D 150 6.3 18.0 6 0.4 0.671 0.604 0.268 0.268 0.241 0.107
NOJD227M006# D 220 6.3 26.4 8 0.4 0.671 0.604 0.268 0.268 0.241 0.107
NOJE227M006# E 220 6.3 26.4 12 0.4 0.704 0.633 0.281 0.281 0.253 0.113
NOJE337M006# E 330 6.3 39.6 12 0.3 0.812 0.731 0.325 0.244 0.219 0.097
NOJV477M006# V 470 6.3 56.4 12 0.3 1.000 0.900 0.400 0.300 0.270 0.120
10 Volt @ 85°C (7 Volt @ 105°C)
NOJA475M010# A 4.7 10 1.0 6 3.1 0.170 0.153 0.068 0.528 0.475 0.211
NOJA685M010# A 6.8 10 1.4 6 2.6 0.186 0.167 0.074 0.484 0.435 0.193
NOJA106M010# A 10 10 2.0 6 2.2 0.202 0.182 0.081 0.445 0.400 0.178
NOJB106M010# B 10 10 2.0 6 2.2 0.215 0.194 0.086 0.474 0.426 0.189
NOJB156M010# B 15 10 3.0 6 2 0.226 0.203 0.090 0.452 0.406 0.181
NOJB226M010# B 22 10 4.4 6 1.8 0.238 0.214 0.095 0.428 0.386 0.171
RATINGS & PART NUMBER REFERENCE
All technical data relates to an ambient temperature of +25ºC. Capacitance and DF are measured at 120Hz, 0.5RMS with DC bias of 2.2V. DCL is measured at
rated voltage after 5 minutes.
NOTE: AVX reserves the rights to supply higher voltage rating
in the same case size, to the same reliability standards.
78
NOJ
Type
Y
Case Size
107
Capacitance Code
1st two digits
represent significant
figures, 3rd digit
represents multiplier
in pF
M
Capacitance
Tolerance
M = ±20%
006
Rated DC Voltage
001 = 1.8Vdc
002 = 2.5Vdc
004 = 4Vdc
006 = 6.3Vdc
010 = 10Vdc
RWJ
Packaging
R = Lead Free
7" Reel
S = Lead Free
13" Reel
OxiCap™ NOJ Series
Low Profile
Five additional case sizes are available in
the NOJ range offering low profile solid
niobium oxide capacitors. Designed for
applications where maximum height of
components above or below board are of
prime consideration, this height of 1.2,
1.5 and 2.0mm equates to that of a
standard integrated circuit package after
mounting. The S&T footprints are
identical to the A&B case size parts and
the W&Y footprints to C&D case size
parts.
L
SAAW
1
W
H
HOW TO ORDER
Technical Data: All technical data relate to an ambient temperature of +25°C is not stated
Capacitance Range: 10µF to 330µF
Capacitance Tolerance: ±20%
Leakage Current DCL: 0.02CV
Rated Voltage DC (VR)
+85°C: 1.8 2.5 4 6.3 10
Category Voltage (VC)
+105°C: 1.2 1.7 2.7 4 7
Surge Voltage (VS)
+85°C: 2.3 3.3 5.2 8 13
+105°C: 1.6 2.2 3.4 5 8
Temperature Range: -55°C to +105°C
Reliability: 0.5% per 1000 hours at 85°C,
VR
, 0.1Ω/V series impedance, 60% confidence level
Meets requirements of AEC-Q200
CASE DIMENSIONS: millimeters (inches)
TECHNICAL SPECIFICATIONS
For part marking see page 121
Code EIA L±0.20 (0.008) W+0.20 (0.008) H Max W1±0.20 A+0.30 (0.012) S Min.
Code –0.10 (0.004) (0.008) –0.20 (0.008)
R* 2012-12 2.05 (0.081) 1.30 (0.051)
1.0 ±0.1
1.20 (0.047) 0.50 (0.020) 0.85 (0.033)
P2012-15 2.05 (0.081) 1.35 (0.053)
1.0 ±0.1
1.20 (0.047) 0.50 (0.020) 0.85 (0.033)
S** 3216-12 3.20 (0.126) 1.60 (0.063) 1.20 (0.047) 1.20 (0.047) 0.80 (0.031) 1.10 (0.043)
T** 3528-12 3.50 (0.138) 2.80 (0.110) 1.20 (0.047) 2.20 (0.087) 0.80 (0.031) 1.40 (0.055)
W** 6032-15 6.00 (0.236) 3.20 (0.126) 1.50 (0.059) 2.20 (0.087) 1.30 (0.051) 2.90 (0.114)
Y** 7343-20 7.30 (0.287) 4.30 (0.169) 2.00 (0.079) 2.40 (0.094) 1.30 (0.051) 4.40 (0.173)
X** 7343-15 7.30 (0.287) 4.30 (0.169) 1.50 (0.059) 2.40 (0.094) 1.30 (0.051) 4.40 (0.173)
*0805 Footprint Compatible
** Low Profile Versions of A & B & C & D Case, respectively
W1dimension applies to the termination width for A dimensional area only.
Pad Stand-off is 0.1±0.1.
(0.039 ±0.004)
(0.039 ±0.004)
79
OxiCap™ NOJ Series
Low Profile
Developmental Ratings - subject to change
CAPACITANCE AND RATED VOLTAGE RANGE
(LETTER DENOTES CASE SIZE)
LEAD-FREE COMPATIBLE
COMPONENT
ENVIRONMENTAL FRIENDLY
COMPONENT
RATINGS & PART NUMBER REFERENCE
Capacitance Rated Voltage DC (VR) to 85°C / 0.66 DC to 105°C / 0.5 DC to 125ºC
Cap. (µF) Code 1.8V (x) 2.5V (e) 4V (G) 6.3V (J) 10V (A)
1.0 105 RR
1.5 155 R
2.2 225 RR
3.3 335 RRP/S
4.7 475 RRP/S T
6.8 685 RRP/R/S T T
10 106 RP/R/SP/R/S/T T
15 156 P/R/S P/R/S/T P/T
22 226 P/R/S/T P/T TW
33 336 P/T TW
47 476 TWW
68 686 TWWX/Y Y
100 107 W WW/X Y
150 157 WW/X Y Y
220 227 W/X Y Y
330 337 Y Y
470 477 Y
Rated DCL DF ESR 100kHz Ripple Current Ratings (A) 100kHz Ripple Voltage Ratings (V)
AVX Case Capacitance Voltage (µA) % Max. (Ω)
Part No. Size (µF) (V) Max. Max. @100kHz 25ºC 85ºC 105ºC 25ºC 85ºC 105ºC
1.8 Volt @ 85°C (1.2 Volt @ 105°C)
NOJS156*001# S 15 1.8 1.0 6 2.0 0.197 0.178 0.079 0.395 0.335 0.158
NOJT226*001# T 22 1.8 1.0 6 1.8 0.231 0.208 0.092 0.416 0.374 0.166
NOJT336*001# T 33 1.8 1.2 6 1.7 0.238 0.214 0.095 0.404 0.364 0.162
NOJW107*001# W 100 1.8 3.6 6 0.15 0.849 0.764 0.339 0.127 0.115 0.051
NOJX227*001# X 220 1.8 8.0 8 0.4 0.548 0.493 0.219 0.219 0.197 0.088
NOJY337*001# Y 330 1.8 11.9 8 0.3 0.707 0.636 0.283 0.212 0.191 0.085
NOJY477*001# Y 470 1.8 16.9 8 0.3 0.707 0.636 0.283 0.212 0.191 0.085
2.5 Volt @ 85°C (1.7 Volt @ 105°C)
NOJP106*002# P 10 2.5 1.0 6 4.5 0.126 0.114 0.051 0.569 0.512 0.228
NOJS106*002# S 10 2.5 1.0 6 2.2 0.188 0.169 0.075 0.414 0.373 0.166
NOJT156*002# T 15 2.5 1.0 6 2.0 0.219 0.197 0.088 0.438 0.394 0.175
NOJT226*002# T 22 2.5 1.1 6 1.9 0.225 0.202 0.090 0.427 0.384 0.171
NOJW686*002# W 68 2.5 3.4 6 0.4 0.520 0.468 0.208 0.208 0.187 0.083
NOJX157*002# X 150 2.5 7.5 6 0.4 0.548 0.493 0.219 0.219 0.197 0.088
NOJY227*002# Y 220 2.5 11.0 8 0.4 0.612 0.551 0.245 0.245 0.220 0.098
NOJY337*002# Y 330 2.5 16.5 10 0.3 0.707 0.636 0.283 0.212 0.191 0.085
4 Volt @ 85°C (2.7 Volt @ 105°C)
NOJP685*004# P 6.8 4.0 1.0 6 5.3 0.117 0.105 0.047 0.618 0.556 0.247
NOJS685*004# S 6.8 4.0 1.0 6 2.6 0.173 0.156 0.069 0.450 0.405 0.180
NOJP106*004# P 10 4.0 1.0 16 4.5 0.126 0.114 0.051 0.569 0.512 0.228
NOJT106*004# T 10 4.0 1.0 6 2.2 0.209 0.188 0.084 0.460 0.414 0.184
NOJT156*004# T 15 4.0 1.2 6 2 0.219 0.197 0.088 0.438 0.394 0.175
NOJW476*004# W 47 4.0 3.8 6 0.5 0.465 0.418 0.186 0.232 0.209 0.093
NOJX107*004# X 100 4.0 8.0 6 0.4 0.548 0.493 0.219 0.219 0.197 0.088
NOJY157*004# Y 150 4.0 12.0 6 0.4 0.612 0.551 0.245 0.245 0.220 0.098
NOJY227*004# Y 220 4.0 17.6 10 0.4 0.612 0.551 0.245 0.245 0.220 0.098
6.3 Volt @ 85°C (4 Volt @ 105°C)
NOJP475*006# P 4.7 6.3 1.0 6 6.1 0.109 0.098 0.043 0.663 0.596 0.265
NOJS475*006# S 4.7 6.3 1.0 6 3.2 0.156 0.141 0.062 0.500 0.450 0.200
NOJT685*006# T 6.8 6.3 1.0 6 2.6 0.192 0.173 0.077 0.500 0.450 0.200
NOJT106*006# T 10 6.3 1.2 6 2.2 0.209 0.188 0.084 0.460 0.414 0.184
NOJW336*006# W 33 6.3 4.0 6 0.5 0.465 0.418 0.186 0.232 0.209 0.093
NOJX686*006# X 68 6.3 8.2 6 0.5 0.490 0.441 0.196 0.245 0.220 0.098
NOJY686*006# Y 68 6.3 8.2 6 0.5 0.548 0.493 0.219 0.274 0.246 0.110
NOJY107*006# Y 100 6.3 12.0 6 0.4 0.612 0.551 0.245 0.245 0.220 0.098
NOJY157*006# Y 150 6.3 18.0 6 0.4 0.612 0.551 0.245 0.245 0.220 0.098
All technical data relates to an ambient temperature of +25ºC. Capacitance and DF are measured at 120Hz, 0.5RMS with DC bias of 2.2V. DCL is measured at
rated voltage after 5 minutes.
NOTE: AVX reserves the rights to supply higher voltage rating in the same case size, to the same reliability standards.
NON-BURN
NON-SMOKE
80
NOS
Type
D
Case Size
107
Capacitance Code
1st two digits
represent significant
figures, 3rd digit
represents multiplier
in pF
M
Capacitance
Tolerance
M = ±20%
006
Rated DC Voltage
001 = 1.8Vdc
002 = 2.5Vdc
004 = 4Vdc
006 = 6.3Vdc
010 = 10Vdc
R
Packaging
R = Lead Free
7" Reel
S = Lead Free
13" Reel
0100
ESR
ESR value in
mOhms@100kHz
OxiCap™ NOS Low ESR Series
Niobium Oxide Capacitor
NOS Low ESR series of OxiCap™
niobium oxide capacitors have been
developed in order to offer significant
Cost versus Performance value as the
key requirement for mass manufactured
electronic products. A new solid elec-
trolyte capacitor OxiCap™ has been
developed by AVX in standard EIA SMT
case sizes. The OxiCap™ non-burn
technology is based on NbO niobium
oxide ceramic material as the anodic
material processed through the same
manufacturing process as tantalum
capacitors. Nb2O5dielectric in combina-
tion to self-healing MnO2cathode is a
basis for a excellent reliability level
0.2%/1000 hrs. within a temperature
range up to 125°C and rated voltage <6V
(rail voltage <5V). Electrical parameters
are similar to general low ESR tantalum
specifications. NbO and MnO2are
widely available materials. The laser
coded orange molded body gives total
traceability.
• Reduced Voltage Derating
• Failed OxiCapTM will not burn up to
category voltage
L
SAAW
1
W
H
HOW TO ORDER
Technical Data: All technical data relate to an ambient temperature of +25°C is not stated
Capacitance Range: 10µF to 1000µF
Capacitance Tolerance: ±20%
Leakage Current DCL: 0.02CV
Rated Voltage DC (VR)
+85°C: 1.8 2.5 4 6.3
Category Voltage (VC)
+125°C: 0.9 1.3 2 3
Surge Voltage (VS)
+85°C: 2.3 3.3 5.2 8
+125°C: 1.2 1.7 2.6 4
Temperature Range: -55°C to +125°C
Reliability: 0.2% per 1000 hours at 85°C,
VR
, 0.1Ω/V series impedance, 60% confidence level
Meets requirements of AEC-Q200
TECHNICAL SPECIFICATIONS
Code EIA L±0.20 (0.008) W+0.20 (0.008) H+0.20 (0.008) W1±0.20 A+0.30 (0.012) S Min.
Code –0.10 (0.004) –0.10 (0.004) (0.008) –0.20 (0.008)
P* 2012-15 2.05 (0.081) 1.30 (0.051) 1.0 ±0.1 1.20 (0.047) 0.50 (0.020) 0.85 (0.033)
(0.039 ±0.004)
A3216-18 3.20 (0.126) 1.60 (0.063) 1.60 (0.063) 1.20 (0.047) 0.80 (0.031) 1.10 (0.043)
B3528-21 3.50 (0.138) 2.80 (0.110) 1.90 (0.075) 2.20 (0.087) 0.80 (0.031) 1.40 (0.055)
C6032-28 6.00 (0.236) 3.20 (0.126) 2.60 (0.102) 2.20 (0.087) 1.30 (0.051) 2.90 (0.114)
D7343-31 7.30 (0.287) 4.30 (0.169) 2.90 (0.114) 2.40 (0.094) 1.30 (0.051) 4.40 (0.173)
E7343-43 7.30 (0.287) 4.30 (0.169) 4.10 (0.162) 2.40 (0.094) 1.30 (0.051) 4.40 (0.173)
Y7343-20 7.30 (0.287) 4.30 (0.169) 2.00 Max (0.079) 2.40 (0.094) 1.30 (0.051) 4.40 (0.173)
V7361-38 7.30 (0.287) 6.10 (0.240) 3.45 ±0.30 3.10 (0.120) 1.40 (0.055) 4.40 (0.173)
(0.136±0.012)
Z* 7361-45 7.30 (0.287) 6.10 (0.240) 4.30 (0.169) 3.10 (0.120) 1.40 (0.055) 4.40 (0.173)
W1dimension applies to the termination width for A dimensional area only. *-under development
CASE DIMENSIONS: millimeters (inches)
81
Capacitance
Rated Voltage DC (
VR
) to 85°C / 0.66 DC to 105ºC / 0.5 DC to 125ºC
Cap. (µF) Code 1.8V (x) 2.5V (e) 4.0V (G) 6.3V (J)
4.7 475
6.8 685
10 106 A(2000)
15 156 A(1500) B(600)
22 226 A(900) B(600) B(600)
B(600)
33 336 A(900) B(600)* B(600) C(500)
W(250)
B(500)
47 476 B(500) B(500) C(300) C(300)
W(150)
C(200) C(75,200)
68 686 B(500) W(150) C(200) X(100)
Y(100)
B(350) C(70,150) C(150)
100 107 C(200) C(150) X(100) D(80,100)
W(150) Y(100)
150 157 C(150) C(65,150) C(90,150) D(70,100)
X(100) Y(100) Y(100)
220 227 C(125) C(80,125) D(60,100) D(60,100)
X(100) Y(100) Y(100) E(80,100)
330 337 C(125) D(100) D(100) E(80,100)
Y(100) Y(100 E(100)
470 477 D(100) D(55,100) E(75,100) V(75)
Y(100) E(100)
680 687 D(100) E(60) V(75)
E(100)
1000 108 E(60) V(50)
1500 158 V(50) Z
2200 228 Z
Developmental Ratings - subject to change
Violet - Please Contact Manufacturer
CAPACITANCE AND RATED VOLTAGE RANGE
(LETTER DENOTES CASE SIZE)
LEAD-FREE COMPATIBLE
COMPONENT
ENVIRONMENTAL FRIENDLY
COMPONENT
OxiCap™ NOS Low ESR Series
Niobium Oxide Capacitor
NON-BURN
NON-SMOKE
82
OxiCap™ NOS Low ESR Series
Niobium Oxide Capacitor
OxiCap™ NOS Low ESR Series
Niobium Oxide Capacitor
RATINGS & PART NUMBER REFERENCE
Violet - Please Contact Manufacturer
All technical data relates to an ambient temperature of +25ºC. Capacitance and DF are measured at 120Hz, 0.5RMS with DC bias of 2.2V. DCL is measured at
rated voltage after 5 minutes.
NOTE: AVX reserves the rights to supply higher voltage rating in the same case size, to the same reliability standards.
AVX Case Capacitance Rated DCL DF ESR 100kHz Ripple Current Ratings (A) 100kHz Ripple Voltage Ratings (V)
Part No. Size (µF) Voltage(V) (µA) %Max. (mΩ)25ºC 85ºC 125ºC 25ºC 85ºC 125ºC
@100kHz
1.8 Volt @ 85°C (1.2 Volt @ 105°C, 0.9V @ 125ºC)
NOSB107M001#0350 B 100 1.8 3.6 6 350 0.540 0.486 0.216 0.189 0.170 0.076
NOSW107M001#0150 W 100 1.8 3.6 6 150 0.849 0.764 0.339 0.127 0.115 0.051
NOSC227M001#0125 C 220 1.8 8.0 8 125 1.028 0.925 0.411 0.128 0.116 0.051
NOSX227M001#0100 X 220 1.8 8.0 8 100 1.095 0.986 0.438 0.110 0.099 0.044
NOSY337M001#0100 Y 330 1.8 11.9 8 100 1.225 1.102 0.490 0.122 0.110 0.049
NOSY477M001#0100 Y 470 1.8 16.9 8 100 1.225 1.102 0.490 0.122 0.110 0.049
2.5 Volt @ 85°C (1.7 Volt @ 105°C, 1.3V @ 125ºC)
NOSA226M002#0900 A 22 2.5 1.1 6 900 0.316 0.285 0.126 0.285 0.256 0.114
NOSB336M002#0600 B 33 2.5 1.7 6 600 0.412 0.371 0.165 0.247 0.223 0.099
NOSB476M002#0500 B 47 2.5 2.4 6 500 0.452 0.406 0.181 0.226 0.203 0.090
NOSC686M002#0200 C 68 2.5 3.4 6 200 0.812 0.731 0.325 0.162 0.146 0.065
NOSW686M002#0150 W 68 2.5 3.4 6 150 0.849 0.764 0.339 0.127 0.115 0.051
NOSC107M002#0150 C 100 2.5 5.0 6 150 0.938 0.844 0.375 0.141 0.127 0.056
NOSC157M002#0065 C 150 2.5 7.6 6 65 1.425 1.283 0.570 0.093 0.083 0.037
NOSC157M002#0150 C 150 2.5 7.6 6 150 0.938 0.844 0.375 0.141 0.127 0.056
NOSX157M002#0100 X 150 2.5 7.5 6 100 1.095 0.986 0.438 0.110 0.099 0.044
NOSC227M002#0080 C 220 2.5 11.0 8 80 1.285 1.156 0.514 0.103 0.092 0.041
NOSC227M002#0125 C 220 2.5 11.0 8 125 1.028 0.925 0.411 0.128 0.116 0.051
NOSY227M002#0100 Y 220 2.5 11.0 8 100 1.225 1.102 0.490 0.122 0.110 0.049
NOSD337M002#0100 D 330 2.5 16.5 10 100 1.342 1.207 0.537 0.134 0.121 0.054
NOSY337M002#0100 Y 330 2.5 16.5 10 100 1.225 1.102 0.490 0.122 0.110 0.049
NOSD447M002#0055 D 470 2.5 23.5 10 55 1.809 1.628 0.724 0.099 0.090 0.040
NOSD447M002#0100 D 470 2.5 23.5 10 100 1.342 1.207 0.537 0.134 0.121 0.054
NOSE477M002#0100 E 470 2.5 23.5 10 100 1.407 1.266 0.563 0.141 0.127 0.056
NOSE687M002#0060 E 680 2.5 34.0 12 60 1.817 1.635 0.727 0.109 0.098 0.044
NOSV108M002#0050 V 1000 2.5 50.0 18 50 2.449 2.205 0.980 0.122 0.110 0.049
4 Volt @ 85°C (2.7 Volt @ 105°C, 2V @ 125ºC)
NOSA156M004#1500 A 15 4 1.2 6 1500 0.245 0.220 0.098 0.367 0.331 0.147
NOSB226M004#0600 B 22 4 1.8 6 600 0.412 0.371 0.165 0.247 0.223 0.099
NOSB336M004#0600 B 33 4 2.6 6 600 0.412 0.371 0.165 0.247 0.223 0.099
NOSB476M004#0500 B 47 4 3.8 6 500 0.452 0.406 0.181 0.226 0.203 0.090
NOSC476M004#0300 C 47 4 3.8 6 300 0.663 0.597 0.265 0.199 0.179 0.080
NOSW476M004#0150 W 47 4 3.8 6 150 0.849 0.764 0.339 0.127 0.115 0.051
NOSC686M004#0200 C 68 4 5.4 6 200 0.812 0.731 0.325 0.162 0.146 0.065
NOSC107M004#0070 C 100 4 8.0 6 70 1.373 1.236 0.549 0.096 0.087 0.038
NOSC107M004#0150 C 100 4 8.0 6 150 0.938 0.844 0.375 0.141 0.127 0.056
NOSX107M004#0100 X 100 4 8.0 6 100 1.095 0.986 0.438 0.110 0.099 0.044
NOSC157M004#0090 C 150 4 12.0 6 90 1.211 1.090 0.484 0.109 0.098 0.044
NOSC157M004#0150 C 150 4 12.0 6 150 0.938 0.844 0.375 0.141 0.127 0.056
NOSY157M004#0100 Y 150 4 12.0 6 100 1.225 1.102 0.490 0.122 0.110 0.049
NOSD227M004#0060 D 220 4 17.6 8 60 1.732 1.559 0.693 0.104 0.094 0.042
NOSD227M004#0100 D 220 4 17.6 8 100 1.342 1.207 0.537 0.134 0.121 0.054
NOSY227M004#0100 Y 220 4 17.6 10 100 1.225 1.102 0.490 0.122 0.110 0.049
NOSD337M004#0100 D 330 4 26.4 8 100 1.342 1.207 0.537 0.134 0.121 0.054
NOSE337M004#0100 E 330 4 26.4 8 100 1.407 1.266 0.563 0.141 0.127 0.056
NOSE477M004#0075 E 470 4 37.6 12 75 1.625 1.462 0.650 0.122 0.110 0.049
NOSE477M004#0100 E 470 4 37.6 12 100 1.407 1.266 0.563 0.141 0.127 0.056
NOSV687M004#0075 V 680 4 54.4 14 75 2.000 1.800 0.800 0.150 0.135 0.060
83
OxiCap™ NOS Low ESR Series
Niobium Oxide Capacitor
OxiCap™ NOS Low ESR Series
Niobium Oxide Capacitor
RATINGS & PART NUMBER REFERENCE
All technical data relates to an ambient temperature of +25ºC. Capacitance and DF are measured at 120Hz, 0.5RMS with DC bias of 2.2V. DCL is measured at
rated voltage after 5 minutes.
NOTE: AVX reserves the rights to supply higher voltage rating in the same case size, to the same reliability standards.
AVX Case Capacitance Rated DCL DF ESR 100kHz Ripple Current Ratings (A) 100kHz Ripple Voltage Ratings (V)
Part No. Size (µF) Voltage(V) (µA) %Max. (mΩ)25ºC 85ºC 125ºC 25ºC 85ºC 125ºC
@100kHz
6.3 Volt @ 85°C (4 Volt @ 105°C, 3V @ 125ºC)
NOSA106M006#2000 A 10 6.3 1.2 6 2000 0.212 0.191 0.085 0.424 0.382 0.170
NOSB156M006#0600 B 15 6.3 1.8 6 600 0.412 0.371 0.165 0.247 0.223 0.099
NOSB226M006#0600 B 22 6.3 2.6 6 600 0.412 0.371 0.165 0.247 0.223 0.099
NOSB336M006#0600 B 33 6.3 4.0 6 600 0.412 0.371 0.165 0.247 0.223 0.099
NOSC336M006#0500 C 33 6.3 4.0 6 500 0.514 0.462 0.206 0.257 0.231 0.103
NOSW336M006#0250 W 33 6.3 4.0 6 250 0.657 0.592 0.263 0.164 0.148 0.066
NOSC476M006#0300 C 47 6.3 5.7 6 300 0.663 0.597 0.265 0.199 0.179 0.080
NOSC686M006#0075 C 68 6.3 8.2 6 75 1.327 1.194 0.531 0.099 0.090 0.040
NOSC686M006#0200 C 68 6.3 8.2 6 200 0.812 0.731 0.325 0.162 0.146 0.065
NOSX686M006#0100 X 68 6.3 8.2 6 100 1.095 0.986 0.438 0.110 0.099 0.044
NOSY686M006#0100 Y 68 6.3 8.2 6 100 1.225 1.102 0.490 0.122 0.110 0.049
NOSC107M006#0150 C 100 6.3 12.0 8 150 0.938 0.844 0.375 0.141 0.127 0.056
NOSD107M006#0080 D 100 6.3 12.0 6 80 1.500 1.350 0.600 0.120 0.108 0.048
NOSD107M006#0100 D 100 6.3 12.0 6 100 1.342 1.207 0.537 0.134 0.121 0.054
NOSY107M006#0100 Y 100 6.3 12.0 6 100 1.225 1.102 0.490 0.122 0.110 0.049
NOSD157M006#0070 D 150 6.3 18.0 6 70 1.604 1.443 0.641 0.112 0.101 0.045
NOSD157M006#0100 D 150 6.3 18.0 6 100 1.342 1.207 0.537 0.134 0.121 0.054
NOSY157M006#0100 Y 150 6.3 18.0 6 100 1.225 1.102 0.490 0.122 0.110 0.049
NOSD227M006#0060 D 220 6.3 26.4 8 60 1.732 1.559 0.693 0.104 0.094 0.042
NOSD227M006#0100 D 220 6.3 26.4 8 100 1.342 1.207 0.537 0.134 0.121 0.054
NOSE227M006#0080 E 220 6.3 26.4 12 80 1.573 1.416 0.629 0.126 0.113 0.050
NOSE227M006#0100 E 220 6.3 26.4 12 100 1.407 1.266 0.563 0.141 0.127 0.056
NOSE337M006#0080 E 330 6.3 39.6 12 80 1.573 1.416 0.629 0.126 0.113 0.050
NOSE337M006#0100 E 330 6.3 39.6 12 100 1.407 1.266 0.563 0.141 0.127 0.056
NOSV477M006#0075 V 470 6.3 56.4 12 75 2.000 1.800 0.800 0.150 0.135 0.060
84
OxiCap™ NOM Low ESR Multianodes
Niobium Oxide Capacitor
NOM
Type
E
Case Size
227
Capacitance Code
1st two digits
represent significant
figures, 3rd digit
represents multiplier
in pF
M
Capacitance
Tolerance
M = ±20%
006
Rated DC Voltage
001 = 1.8Vdc
002 = 2.5Vdc
004 = 4Vdc
006 = 6.3Vdc
R
Packaging
R = Lead Free
7" Reel
S = Lead Free
13" Reel
0040
ESR
ESR value in
mOhms@100kHz
Low ESR down to 30mΩand high ripple
current are the key parameters of the
multianode construction within the E
case package available now with niobium
oxide anode – OxiCapTM product family.
Niobium oxide technology benefits such
as high resistance and non-burn together
with excellent reliability and reduced
derating are maintained within this multi-
anode series.
L
SAAW
1
W
H
HOW TO ORDER
Technical Data: All technical data relate to an ambient temperature of +25°C is not stated
Capacitance Range: 220µF to 470µF
Capacitance Tolerance: ±20%
Leakage Current DCL: 0.02CV
Rated Voltage DC (VR)
+85°C: 1.8 2.5 4 6.3
Category Voltage (VC)
+125°C: 0.9 1.3 2 3
Surge Voltage (VS)
+85°C: 2.3 3.3 5.2 8
+125°C: 1.2 1.7 2.6 4
Temperature Range: -55°C to +125°C
Reliability: 0.2% per 100 hours at 85°C,
VR
, 0.1Ω/V series impedance, 60% confidence level
TECHNICAL SPECIFICATIONS
Code EIA L±0.20 (0.008) W+0.20 (0.008) H+0.20 (0.008) W1±0.20 A+0.30 (0.012) S Min.
Code –0.10 (0.004) –0.10 (0.004) (0.008) –0.20 (0.008)
E7343-43 7.30 (0.287) 4.30 (0.169) 4.10 (0.162) 2.40 (0.094) 1.30 (0.051) 4.40 (0.173)
W1dimension applies to the termination width for A dimensional area only.
CASE DIMENSIONS: millimeters (inches)
85
OxiCap™ NOM Low ESR Multianodes
Niobium Oxide Capacitor
AVX Case Capacitance Rated DCL DF ESR 100kHz Ripple Current Ratings (A) 100kHz Ripple Voltage Ratings (V)
Part No. Size (µF) Voltage(V) (µA) %Max. (mΩ)25ºC 85ºC 125ºC 25ºC 85ºC 125ºC
1.8 Volt @ 85°C (1.2 Volt @ 105°C / 0.9V @ 125ºC)
NOME687M001#0023 E 680 1.8 24.5 6 23 3.753 3.378 1.501 0.086 0.078 0.035
2.5 Volt @ 85°C (1.7 Volt @ 105°C / 1.3V @ 125ºC)
NOME477M002#0030 E 470 2.5 23.5 10 30 3.286 2.958 1.315 0.099 0.089 0.039
4 Volt @ 85°C (2.7 Volt @ 105°C / 2V @ 125ºC)
NOME337M004#0035 E 330 4 26.4 8 35 3.043 2.738 1.217 0.106 0.096 0.043
6.3 Volt @ 85°C (4 Volt @ 105°C / 3V @ 125ºC)
NOME227M006#0040 E 220 6.3 26.4 12 40 2.846 2.561 1.138 0.114 0.102 0.046
Capacitance
Rated Voltage DC (
VR
) to 85°C / 0.66 DC to 105ºC / 0.5 DC to 125ºC
Cap. (µF) Code 1.8V (x) 2.5V (e) 4.0V (G) 6.3V (J) 10V (A)
150 157 E(40)
220 227 E(40)
330 337 E(35)
470 477 E(30)
680 687 E(23)
1000 108
Developmental Ratings - subject to change
CAPACITANCE AND RATED VOLTAGE RANGE
(LETTER DENOTES CASE SIZE)
RATINGS & PART NUMBER REFERENCE
LEAD-FREE COMPATIBLE
COMPONENT
ENVIRONMENTAL FRIENDLY
COMPONENT
NON-BURN
NON-SMOKE
All technical data relates to an ambient temperature of +25ºC. Capacitance and DF are measured at 120Hz, 0.5RMS with DC bias of 2.2V. DCL is measured at
rated voltage after 5 minutes.
NOTE: AVX reserves the rights to supply higher voltage rating in the same case size, to the same reliability standards.
86
AVX offers a broad line of solid Tantalum capacitors in a wide
range of sizes, styles, and ratings to meet any design needs.
This catalog combines into one source AVX’s leaded tanta-
lum capacitor information from its worldwide tantalum oper-
ations.
The TAP is rated for use from -55°C to +85°C at rated
voltage and up to +125°C with voltage derating. There
are three preferred wire forms to choose from which are
available on tape and reel, and in bulk for hand insertion.
Four sizes of molded axials, the TAR series, are also
available. The TAR is fully marked and available on tape and
reel for high speed insertion. The TAA is a hermetically sealed
series also with four case sizes available.
AVX has a complete tantalum applications service available
for use by all our customers. With the capability to prototype
and mass produce solid tantalum capacitors in special
configurations, almost any design need can be fulfilled.
And if the customer requirements are outside our standard
testing, AVX will work with you to define and implement a test
or screening plan.
AVX is determined to become the world leader in tantalum
capacitor technology and has made, and is continuing to
make, significant investments in equipment and research to
reach that end. We believe that the investment has paid off
with the devices shown on the following pages.
Section 3: Introduction
Foreword
Dipped Radial Capacitors
Terminal Wire
Tantalum wire
Resin encapsulation
Tantalum Graphite
Silver
Solder
Manganese
dioxide
Tantalum
pentoxide
SOLID TANTALUM RESIN DIPPED
SERIES TAP
The TAP resin dipped series of miniature tantalum capacitors
is available for individual needs in both commercial and
professional applications. From computers to automotive to
industrial, AVX has a dipped radial for almost any application.
87
Figure 1 Figure 2 Figure 3
Wire Form C Wire Form B Wire Form S
D
H
L
S
d2 (0.079)
min
+
D
L
S
d
H1 + 4 (0.16)
max
D
H1
L
S
d2 (0.079)
min
+
2.0(0.08)
max
Figure 4 Figure 5 Figure 6
Wire Form F Wire Form D Wire Form G
D
H + 3.8 (0.15)
max
L
S
1.10 +0.25
-0.10
(0.4 +0.010
-0.004 )
S
d
0.079 (2)
min
D
H1 max
+0.118
(3.0)
L
+
D
H
L
S
d
Non-Preferred Wire Forms
(Not recommended for new designs)
DIMENSIONS
millimeters (inches)
Preferred Wire Forms
Packaging
Wire Form Figure Case Size L (see note 1) S d Suffixes Available*
CCS Bulk
16.0±4.00 5.00±1.00 0.50±0.05 CRW Tape/Reel
CFigure 1 A - R* (0.630±0.160) (0.200±0.040) (0.020±0.002) CRS Tape/Ammo
BFigure 2 A - J* 16.0±4.00 5.00±1.00 0.50±0.05 BRW Tape/Reel
(0.630±0.160) (0.200±0.040) (0.020±0.002) BRS Tape/Ammo
SCS Bulk
16.0±4.00 2.50±0.50 0.50±0.05 SRW Tape/Reel
SFigure 3 A - J* (0.630±0.160) (0.100±0.020) (0.020±0.002) SRS Tape/Ammo
Non-Preferred Wire Forms
(Not recommended for new designs)
3.90±0.75 5.00±0.50 0.50±0.05
FFigure 4 A - R (0.155±0.030) (0.200±0.020) (0.020±0.002) FCS Bulk
DCS Bulk
DFigure 5 A - H* 16.0±4.00 2.50±0.75 0.50±0.05 DTW Tape/Reel
(0.630±0.160) (0.100±0.020) (0.020±0.002) DTS Tape/Ammo
16.0±4.00 3.18±0.50 0.50±0.05
GFigure 6 A - J (0.630±0.160) (0.125±0.020) (0.020±0.002) GSB Bulk
Similar to 16.0±4.00 6.35±1.00 0.50±0.05
HFigure 1 A - R (0.630±0.160) (0.250±0.040) (0.020±0.002) HSB Bulk
Notes: (1) Lead lengths can be supplied to tolerances other than those above and should be specified in the ordering information.
(2) For D, H, and H1 dimensions, refer to individual product on following pages.
*For case size availability in tape and reel, please refer to pages 91-92.
Dipped Radial Capacitors
Wire Form Outline
SOLID TANTALUM RESIN DIPPED TAP
Preferred Wire Forms
88
+
H
D
Dipped Radial Capacitors
TAP Series
SOLID TANTALUM RESIN DIPPED CAPACITORS
TAP is a professional grade device manufactured with a flame retardant
coating and featuring low leakage current and impedance, very small
physical sizes and exceptional temperature stability. It is designed and
conditioned to operate to +125°C (see page 123 for voltage derating
above 85°C) and is available loose or taped and reeled for auto insertion.
The 15 case sizes with wide capacitance and working voltage ranges
means the TAP can accommodate almost any application.
MAXIMUM CASE DIMENSIONS: millimeters (inches)
TAP
Type
475
Capacitance Code
pF code: 1st two digits
represent significant figures,
3rd digit represents multiplier
(number of zeros to follow)
M
Capacitance Tolerance
K = ±10%
M = ±20%
(For J = ±5% tolerance,
please consult factory)
035
Rated DC Voltage
SCS
Suffix indicating wire form
and packaging
(see page 87)
HOW TO ORDER
Wire C, F, G, H B, S, D
Case H *H1D
A8.50 (0.330) 7.00 (0.280) 4.50 (0.180)
B9.00 (0.350) 7.50 (0.300) 4.50 (0.180)
C10.0 (0.390) 8.50 (0.330) 5.00 (0.200)
D10.5 (0.410) 9.00 (0.350) 5.00 (0.200)
E10.5 (0.410) 9.00 (0.350) 5.50 (0.220)
F11.5 (0.450) 10.0 (0.390) 6.00 (0.240)
G11.5 (0.450) 10.0 (0.390) 6.50 (0.260)
H12.0 (0.470) 10.5 (0.410) 7.00 (0.280)
J13.0 (0.510) 11.5 (0.450) 8.00 (0.310)
K14.0 (0.550) 12.5 (0.490) 8.50 (0.330)
L14.0 (0.550) 12.5 (0.490) 9.00 (0.350)
M14.5 (0.570) 13.0 (0.510) 9.00 (0.350)
N16.0 (0.630) 9.00 (0.350)
P17.0 (0.670) 10.0 (0.390)
R18.5 (0.730) 10.0 (0.390)
89
Technical Data: All technical data relate to an ambient temperature of +25°C
Capacitance Range: 0.1µF to 330µF
Capacitance Tolerance: ±20%; ±10% (±5% consult your AVX representative for details)
Rated Voltage DC (VR)+85°C: 6.3 10 16 20 25 35 50
Category Voltage (VC)+125°C: 4 6.3 10 13 16 23 33
Surge Voltage (VS)+85°C: 8 13 20 26 33 46 65
+125°C: 5 9 12 16 21 28 40
Temperature Range: -55°C to +125°C
Environmental Classification: 55/125/56 (IEC 68-2)
Dissipation Factor: 0.04 for CR 0.1-1.5µF
0.06 for CR 2.2-6.8µF
0.08 for CR 10-68µF
0.10 for CR 100-330µF
Reliability: 1% per 1000 hrs. at 85°C with 0.1Ω/V series impedance, 60% confidence level.
Qualification: CECC 30201 - 032
Capacitance Range (letter denotes case size)
Capacitance Rated voltage DC (VR)
µF Code 6.3V 10V 16V 20V 25V 35V 50V
0.1 104 AA
0.15 154 AA
0.22 224 AA
0.33 334 AA
0.47 474 AA
0.68 684 AB
1.0 105 A A A C
1.5 155 A A A A D
2.2 225 A A A A B E
3.3 335 A A A B B C F
4.7 475 A A B C C E G
6.8 685 A B C D D F H
10 106 B C D E E F J
15 156 C D E F F H K
22 226 D E F H H K L
33 336 E F F J J M
47 476 F G J K M N
68 686 G H L N N
100 107 H K N N
150 157 K N N
220 227 M P R
330 337 P R
Values outside this standard range may be available on request.
AVX reserves the right to supply capacitors to a higher voltage rating, in the same case size, than that ordered.
MARKING
Polarity, capacitance, rated DC voltage, and an "A" (AVX
logo) are laser marked on the capacitor body which is made
of flame retardant gold epoxy resin with a limiting oxygen
index in excess of 30 (ASTM-D-2863).
•Polarity
•Capacitance
•Voltage
•AVX logo
•Tolerance code:
±20% = Standard (no marking)
±10% = “K” on reverse side of unit
±5% = “J” on reverse side of unit
16
10µ
A
+
Dipped Radial Capacitors
TAP Series
TECHNICAL SPECIFICATIONS
90
Dipped Radial Capacitors
TAP Series
AVX Case Capacitance DCL DF ESR
Part No. Size µF (µA) % Max. (Ω)
Max. Max. @ 100 kHz
20 volt @ 85°C (13 volt @ 125°C) continued
TAP 336(*)020 J 33 5.2 8 1.4
TAP 476(*)020 K 47 7.5 8 1.2
TAP 686(*)020 N 68 10.8 8 0.9
TAP 107(*)020 N 100 16.0 10 0.6
25 volt @ 85°C (16 volt @ 125°C)
TAP 105(*)025 A 1.0 0.5 4 10.0
TAP 155(*)025 A 1.5 0.5 4 8.0
TAP 225(*)025 A 2.2 0.5 6 6.0
TAP 335(*)025 B 3.3 0.6 6 5.0
TAP 475(*)025 C 4.7 0.9 6 4.0
TAP 685(*)025 D 6.8 1.3 6 3.1
TAP 106(*)025 E 10 2.0 8 2.5
TAP 156(*)025 F 15 3.0 8 2.0
TAP 226(*)025 H 22 4.4 8 1.5
TAP 336(*)025 J 33 6.6 8 1.2
TAP 476(*)025 M 47 9.4 8 1.0
TAP 686(*)025 N 68 13.6 8 0.8
35 volt @ 85°C (23 volt @ 125°C)
TAP 104(*)035 A 0.1 0.5 4 26.0
TAP 154(*)035 A 0.15 0.5 4 21.0
TAP 224(*)035 A 0.22 0.5 4 17.0
TAP 334(*)035 A 0.33 0.5 4 15.0
TAP 474(*)035 A 0.47 0.5 4 13.0
TAP 684(*)035 A 0.68 0.5 4 10.0
TAP 105(*)035 A 1.0 0.5 4 8.0
TAP 155(*)035 A 1.5 0.5 4 6.0
TAP 225(*)035 B 2.2 0.6 6 5.0
TAP 335(*)035 C 3.3 0.9 6 4.0
TAP 475(*)035 E 4.7 1.3 6 3.0
TAP 685(*)035 F 6.8 1.9 6 2.5
TAP 106(*)035 F 10 2.8 8 2.0
TAP 156(*)035 H 15 4.2 8 1.6
TAP 226(*)035 K 22 6.1 8 1.3
TAP 336(*)035 M 33 9.2 8 1.0
TAP 476(*)035 N 47 10.0 8 0.8
50 volt @ 85°C (33 volt @ 125°C)
TAP 104(*)050 A 0.1 0.5 4 26.0
TAP 154(*)050 A 0.15 0.5 4 21.0
TAP 224(*)050 A 0.22 0.5 4 17.0
TAP 334(*)050 A 0.33 0.5 4 15.0
TAP 474(*)050 A 0.47 0.5 4 13.0
TAP 684(*)050 B 0.68 0.5 4 10.0
TAP 105(*)050 C 1.0 0.5 4 8.0
TAP 155(*)050 D 1.5 0.6 4 6.0
TAP 225(*)050 E 2.2 0.8 6 3.5
TAP 335(*)050 F 3.3 1.3 6 3.0
TAP 475(*)050 G 4.7 1.8 6 2.5
TAP 685(*)050 H 6.8 2.7 6 2.0
TAP 106(*)050 J 10 4.0 8 1.6
TAP 156(*)050 K 15 6.0 8 1.2
TAP 226(*)050 L 22 8.8 8 1.0
AVX Case Capacitance DCL DF ESR
Part No. Size µF (µA) % Max. (Ω)
Max. Max. @ 100 kHz
6.3 volt @ 85°C (4 volt @ 125°C)
TAP 335(*)006 A 3.3 0.5 6 13.0
TAP 475(*)006 A 4.7 0.5 6 10.0
TAP 685(*)006 A 6.8 0.5 6 8.0
TAP 106(*)006 B 10 0.5 8 6.0
TAP 156(*)006 C 15 0.8 8 5.0
TAP 226(*)006 D 22 1.1 8 3.7
TAP 336(*)006 E 33 1.7 8 3.0
TAP 476(*)006 F 47 2.4 8 2.0
TAP 686(*)006 G 68 3.4 8 1.8
TAP 107(*)006 H 100 5.0 10 1.6
TAP 157(*)006 K 150 7.6 10 0.9
TAP 227(*)006 M 220 11.0 10 0.9
TAP 337(*)006 P 330 16.6 10 0.7
10 volt @ 85°C (6.3 volt @ 125°C)
TAP 225(*)010 A 2.2 0.5 6 13.0
TAP 335(*)010 A 3.3 0.5 6 10.0
TAP 475(*)010 A 4.7 0.5 6 8.0
TAP 685(*)010 B 6.8 0.5 6 6.0
TAP 106(*)010 C 10 0.8 8 5.0
TAP 156(*)010 D 15 1.2 8 3.7
TAP 226(*)010 E 22 1.7 8 2.7
TAP 336(*)010 F 33 2.6 8 2.1
TAP 476(*)010 G 47 3.7 8 1.7
TAP 686(*)010 H 68 5.4 8 1.3
TAP 107(*)010 K 100 8.0 10 1.0
TAP 157(*)010 N 150 12.0 10 0.8
TAP 227(*)010 P 220 17.6 10 0.6
TAP 337(*)010 R 330 20.0 10 0.5
16 volt @ 85°C (10 volt @ 125°C)
TAP 155(*)016 A 1.5 0.5 4 10.0
TAP 225(*)016 A 2.2 0.5 6 8.0
TAP 335(*)016 A 3.3 0.5 6 6.0
TAP 475(*)016 B 4.7 0.6 6 5.0
TAP 685(*)016 C 6.8 0.8 6 4.0
TAP 106(*)016 D 10 1.2 8 3.2
TAP 156(*)016 E 15 1.9 8 2.5
TAP 226(*)016 F 22 2.8 8 2.0
TAP 336(*)016 F 33 4.2 8 1.6
TAP 476(*)016 J 47 6.0 8 1.3
TAP 686(*)016 L 68 8.7 8 1.0
TAP 107(*)016 N 100 12.8 10 0.8
TAP 157(*)016 N 150 19.2 10 0.6
TAP 227(*)016 R 220 20.0 10 0.5
20 volt @ 85°C (13 volt @ 125°C)
TAP 105(*)020 A 1.0 0.5 4 10.0
TAP 155(*)020 A 1.5 0.5 4 9.0
TAP 225(*)020 A 2.2 0.5 6 7.0
TAP 335(*)020 B 3.3 0.5 6 5.5
TAP 475(*)020 C 4.7 0.7 6 4.5
TAP 685(*)020 D 6.8 1.0 6 3.6
TAP 106(*)020 E 10 1.6 8 2.9
TAP 156(*)020 F 15 2.4 8 2.3
TAP 226(*)020 H 22 3.5 8 1.8
(*) Insert capacitance tolerance code; M for ±20%, K for ±10% and J for ±5%
NOTE: Voltage ratings are minimum values. AVX reserves the right to supply high-
er voltage ratings in the same case size.
RATINGS AND PART NUMBER REFERENCE
91
SOLID TANTALUM RESIN DIPPED TAP
TAPE AND REEL PACKAGING FOR AUTOMATIC COMPONENT INSERTION
TAP types are all offered on radial tape, in reel or ‘ammo’
pack format for use on high speed radial automatic insertion
equipment, or preforming machines.
The tape format is compatible with EIA 468A standard for
component taping set out by major manufacturers of radial
automatic insertion equipment.
Dipped Radial Capacitors
Tape and Reel Packaging
TAP – available in three formats. See page 92 for dimensions.
‘B’ wires for normal automatic insertion on
5mm pitch.
BRW suffix for reel
BRS suffix for ‘ammo’ pack
Available in case sizes A - J
‘C’ wires for preforming.
CRW suffix for reel
CRS suffix for ‘ammo’ pack
Available in case sizes A - R
‘S’ and ‘D’ wire for special applications,
automatic insertion on 2.5mm pitch.
SRW, DTW suffix for reel
SRS, DTS suffix for ‘ammo’ pack
Available in case sizes A - J
P2
P1
H3
H1
P
h
W2
W1
HL
d
T
W
SD
P
P2
P1
H3
H1
P
h
W2
W1
HL
d
T
W
SD
P
P2
P1
H3
H2
H1
P
h
W2
W1
L
d
T
W
SD
PS wire
92
SOLID TANTALUM RESIN DIPPED TAP
Dipped Radial Capacitors
Tape and Reel Packaging
DIMENSIONS:
millimeters (inches)
Description Code Dimension
Feed hole pitch P 12.7 ± 0.30 (0.500 ± 0.010)
Hole center to lead P13.85 ± 0.70 (0.150 ± 0.030)
to be measured at bottom
of clench
5.05 ± 1.00 (0.200 ± 0.040)
for S wire
Hole center to component center P26.35 ± 0.40 (0.250 ± 0.020)
Change in pitch ∆p±1.00 (± 0.040)
Lead diameter d 0.50 ± 0.05 (0.020 ± 0.003)
Lead spacing S See wire form table
Component alignment ∆h0 ±2.00 (0 ± 0.080)
Feed hole diameter D 4.00 ± 0.20 (0.150 ± 0.008)
Tape width W 18.0 + 1.00 (0.700 + 0.040)
- 0.50 - 0.020)
Hold down tape width W16.00 (0.240) min.
Hold down tape position W21.00 (0.040) max.
Lead wire clench height H 16.0 ± 0.50 (0.630 ± 0.020)
19.0 ± 1.00 (0.750 ± 0.040)
on request
Hole position H19.00 ± 0.50 (0.350 ± 0.020)
Base of component height H218.0 (0.700) min. (S wire only)
Component height H332.25 (1.300) max.
Length of snipped lead L 11.0 (0.430) max.
Total tape thickness T 0.70 ± 0.20 (0.030 ± 0.001)
Carrying card
0.50 ± 0.10 (0.020 ± 0.005)
REEL CONFIGURATION AND
DIMENSIONS:
millimeters (inches)
Diameter 30
(1.18) max.
53 (2.09) max.
80
(3.15)
360 (14.17) max.
45 (1.77) max.
40 (1.57) min.
cardboard with plastic hub.
H ldi t t id
Manufactured from cardboard with plastic hub.
Holding tape outside. Positive terminal leading.
PACKAGING QUANTITIES
For Reels For ‘Ammo’ pack For bulk products
Style Case size No. of pieces
A1500
B, C, D 1250
TAP E, F 1000
G, H, J 750
K, L, M, N, P, R 500
Style Case size No. of pieces
A, B, C, D 3000
TAP E, F, G 2500
H, J 2000
K, L, M, N, P, R 1000
Style Case size No. of pieces
A to H 1000
TAP J to L 500
M to R 100
AMMO PACK DIMENSIONS
millimeters (inches) max.
Height 360 (14.17), width 360 (14.17), thickness 60 (2.36)
GENERAL NOTES
Resin dipped tantalum capacitors are only available taped in
the range of case sizes and in the modular quantities by case
size as indicated.
Packaging quantities on tape may vary by ±1%.
93
D11
(25)
min
L
d
Polarity mark
Molded Axial Capacitors
TAR Series
SOLID TANTALUM MOLDED AXIAL
LEADED CAPACITORS
TAR:
Designed for use in miniature and subminiature circuit
applications.
1. Precision molded and taped and reeled for use in high
speed automatic insertion applications.
2. Suitable for decoupling, blocking, by-passing and filter-
ing in computers, data processing, communications
and other equipment.
3. Available in four case sizes.
4. Tapered nose identifies positive polarity.
5. Capacitance, tolerance, rated voltage and polarity are
marked onto the capacitor body.
6. See page 99 for packaging quantities.
CASE DIMENSIONS: millimeters (inches)
Case L D1dTypical
Size ±0.25 (0.010) ±0.25 (0.010) ±0.05 (0.002) Weight g
Q6.35 (0.250) 2.16 (0.085) 0.50 (0.020) 0.20
R7.40 (0.290) 2.50 (0.100) 0.50 (0.020) 0.25
S8.60 (0.340) 4.30 (0.170) 0.50 (0.020) 0.52
W10.4 (0.410) 4.30 (0.170) 0.50 (0.020) 0.53
HOW TO ORDER
TAR
Type
R
Case Size
335
Capacitance Code
pF code: 1st two digits
represent significant figures,
3rd digit represents multiplier
(number of zeros to follow)
M
Capacitance Tolerance
K = ±10%
M = ±20%
015
Rated DC Voltage
*Not recommended for new designs
94
Technical Data: All technical data relate to an ambient temperature of +25°C
Capacitance Range: 0.1µF to 68µF
Capacitance Tolerance: ±20%; ±10%
Rated Voltage DC (VR)+85°C: 4 6.3 10 15 20 25 35 50
Category Voltage (VC)+125°C: 2.7 4 6.3 10 13 17 23 33
Surge Voltage (VS)+85°C: 5.2 8 13 20 26 33 46 65
+125°C: 3.5 5 9 12 16 21 28 40
Temperature Range: -55°C to +125°C
Environmental Classification: 55/125/56 (IEC 68-2)
Dissipation Factor: See part number table
Molded Axial Capacitors
TAR Series
Capacitance Range (letter denotes case size)
Capacitance Rated voltage DC (VR)
µF 4V 6.3V 10V 15V 20V 25V 35V 50V
0.1 QQ
0.15 QQ
0.22 QQ
0.33 QR
0.47 QQR
0.68 QRR
1.0 Q Q R R
1.5 Q Q R R S
2.2 Q Q R R S S
3.3 Q Q R R R S W
4.7 Q Q R R R S S W
6.8 Q R R R S S W
10 R R R SSSW
15 R R S S W W
22 R S S W W
33 S S W W
47 S W W
68 W W
Values outside this standard range may be available on request without
appropriate release or qualification.
AVX reserves the right to supply capacitors to a tighter specification than that
ordered.
MARKING
• Polarity • Capacitance • Date code
• Tolerance • Voltage
TECHNICAL SPECIFICATIONS
95
AVX Case Capacitance DCL DF ESR
Part No. Size µF (µA) % Max. (Ω)
Max. Max. @ 100 kHz
4 volt @ 85°C (2.7 volt @ 125°C)
TARQ475(*)004 Q 4.7 0.5 8 12
TARQ685(*)004 Q 6.8 0.5 8 10
TARR106(*)004 R 10 0.5 8 10
TARR156(*)004 R 15 0.5 8 8.0
TARR226(*)004 R 22 0.7 8 6.0
TARS336(*)004 S 33 1.1 8 5.0
TARS476(*)004 S 47 1.5 8 3.5
TARW686(*)004 W 68 2.2 8 2.5
6.3 volt @ 85°C (4 volt @ 125°C)
TARQ335(*)006 Q 3.3 0.5 4 14
TARQ475(*)006 Q 4.7 0.5 4 10
TARR685(*)006 R 6.8 0.5 6 8.0
TARR106(*)006 R 10 0.5 6 6.0
TARR156(*)006 R 15 0.7 6 5.0
TARS226(*)006 S 22 1.1 6 3.7
TARS336(*)006 S 33 1.5 6 3.0
TARW476(*)006 W 47 2.3 6 2.0
TARW686(*)006 W 68 3.3 6 1.8
10 volt @ 85°C (7 volt @ 125°C)
TARQ225(*)010 Q 2.2 0.5 4 14
TARQ335(*)010 Q 3.3 0.5 4 10
TARR475(*)010 R 4.7 0.5 4 8.0
TARR685(*)010 R 6.8 0.5 6 6.0
TARR106(*)010 R 10 0.8 6 5.0
TARS156(*)010 S 15 1.2 6 3.7
TARS226(*)010 S 22 1.5 6 2.7
TARW336(*)010 W 33 2.6 6 2.1
TARW476(*)010 W 47 3.8 6 1.7
15 volt @ 85°C (10 volt @ 125°C)
TARQ155(*)015 Q 1.5 0.5 4 14
TARQ225(*)015 Q 2.2 0.5 4 8.0
TARR335(*)015 R 3.3 0.5 4 6.0
TARR475(*)015 R 4.7 0.6 4 5.0
TARR685(*)015 R 6.8 0.8 6 4.0
TARS106(*)015 S 10 1.2 6 3.2
TARS156(*)015 S 15 1.5 6 2.5
TARW226(*)015 W 22 2.6 6 2.0
TARW336(*)015 W 33 4.0 6 1.6
20 volt @ 85°C (13 volt @ 125°C)
TARQ105(*)020 Q 1.0 0.5 4 18
TARQ155(*)020 Q 1.5 0.5 4 12
TARR225(*)020 R 2.2 0.5 4 7.0
TARR335(*)020 R 3.3 0.5 4 5.5
TARR475(*)020 R 4.7 0.8 4 4.5
TARS685(*)020 S 6.8 1.1 6 3.7
TARS106(*)020 S 10 1.6 6 2.8
TARW156(*)020 W 15 2.4 6 2.3
TARW226(*)020 W 22 3.5 6 1.9
AVX Case Capacitance DCL DF ESR
Part No. Size µF (µA) % Max. (Ω)
Max. Max. @ 100 kHz
25 volt @ 85°C (17 volt @ 125°C)
TARQ474(*)025 Q 0.47 0.5 3 20
TARQ684(*)025 Q 0.68 0.5 3 16
TARQ105(*)025 Q 1.0 0.5 3 12
TARR155(*)025 R 1.5 0.5 3 8.0
TARR225(*)025 R 2.2 0.5 3 6.0
TARR335(*)025 R 3.3 0.7 3 5.0
TARS475(*)025 S 4.7 0.9 4 4.0
TARS685(*)025 S 6.8 1.4 4 3.1
TARS106(*)025 S 10 1.5 4 2.5
TARW156(*)025 W 15 3.0 4 2.0
35 volt @ 85°C (23 volt @ 125°C)
TARQ104(*)035 Q 0.1 0.5 3 26
TARQ154(*)035 Q 0.15 0.5 3 21
TARQ224(*)035 Q 0.22 0.5 3 17
TARQ334(*)035 Q 0.33 0.5 3 15
TARQ474(*)035 Q 0.47 0.5 3 13
TARR684(*)035 R 0.68 0.5 3 10
TARR105(*)035 R 1.0 0.5 3 8.0
TARR155(*)035 R 1.5 0.5 3 6.0
TARS225(*)035 S 2.2 0.6 3 5.0
TARS335(*)035 S 3.3 0.9 4 4.0
TARS475(*)035 S 4.7 1.3 4 3.0
TARW685(*)035 W 6.8 1.9 4 2.5
TARW106(*)035 W 10 2.8 4 2.0
50 volt @ 85°C (33 volt @ 125°C)
TARQ104(*)050 Q 0.1 0.5 3 26
TARQ154(*)050 Q 0.15 0.5 3 21
TARQ224(*)050 Q 0.22 0.5 3 17
TARR334(*)050 R 0.33 0.5 3 15
TARR474(*)050 R 0.47 0.5 3 13
TARR684(*)050 R 0.68 0.5 3 10
TARR105(*)050 R 1.0 0.5 3 8.0
TARS155(*)050 S 1.5 0.6 4 5.0
TARS225(*)050 S 2.2 0.9 4 3.5
TARW335(*)050 W 3.3 1.3 4 3.0
TARW475(*)050 W 4.7 1.9 4 2.5
Molded Axial Capacitors
TAR Series
RATINGS AND PART NUMBER REFERENCE
(*) Insert capacitance tolerance code; M for ±20% and K for ±10%
NOTE: Voltage ratings are minimum values. AVX reserves the right to supply higher
voltage ratings in the same case size.
96
Hermetic Axial Capacitors
TAA Series
L1
L2Polarity Mark
d
D
+
Case L1L2DLead Length d Weight
Size max. max. max. min. nom. max. g
A7.20 (0.280) 10.7 (0.420) 3.60 (0.140) 28.0 (1.100) 0.50 0.7
B12.0 (0.470) 15.5 (0.610) 4.90 (0.190) 28.0 (1.100) 0.50 1.3
C17.3 (0.680) 20.9 (0.820) 7.50 (0.290) 23.0 (0.900) 0.60 4.7
D19.9 (0.780) 23.4 (0.920) 9.00 (0.350) 22.0 (0.800) 0.60 7.4
TAA
Type
A
Case Size
105
Capacitance Code
pF code:
1st two digits represent
significant figures,
3rd digit represents
multiplier (number of
zeros to follow)
M
Capacitance
Tolerance
K = ±10%
M = ±20%
035
Rated DC Voltage
G
TAA Packaging
Suffixes
(see page 99)
Note: The tabulated dimensions are for non-insulated capacitors. Insulated capacitors are standard,
dimension L1will increase by 0.8mm maximum, and dimension D by 0.2mm maximum.
SOLID TANTALUM HERMETICALLY
SEALED AXIAL LEADED CAPACITORS TAA: Fully hermetically sealed, of rugged construction and
high reliability for use in military and professional equip-
ment.
1. Extremely low leakage current.
2. Excellent capacitance to size ratio.
3. Available taped and reeled for automatic insertion.
4. Marked with AVX logo, capacitor type, capacitance,
capacitance tolerance, rated voltage, polarity indication
and date of manufacture.
5. Approved to CECC 30-201-801 and IECQ QC300 201
GB0002 supplied conforming to the limits of MIL-C-39003
style CSR, CTS 13 and CTS 32.
*Not recommended for new designs
CASE DIMENSIONS: millimeters (inches)
HOW TO ORDER
97
Hermetic Axial Capacitors
TAA Series
Construction: Hermetically sealed;
axial terminations
Capacitance Range: 0.1µF to 330µF
Capacitance Tolerance: ±20%; ±10%
Measuring Conditions: 120 Hz, 20°C
Rated Voltage VDC +85°C: 6.3 10 16 20 25 35 50
Category Voltage VDC +125°C: 4 6.3 10 13 17 23 33
Surge Voltage VDC +85°C: 8 13 20 26 33 46 65
+125°C: 5 9 12 16 21 28 40
Temperature Range: -55°C to +125°C
Environmental
Classification: 55/125/56 (IEC 68-2)
Dissipation Factor: (tan )0.04 for C=0.1 to 4.7µF
0.06 for C=6.8 to 100µF
0.08 for C=150 to 330µF
Approvals: BS CECC 30 201-801
Capacitance Range (letter denotes case size)
Capacitance Cap Rated voltage DC
µF Code 6.3V 10V 16V 20V 25V 35V 50V
0.1 104 AA
0.15 154 AA
0.22 224 AA
0.33 334 AA
0.47 474 AA
0.68 684 A A A
1.0 105 AA
1.5 155 A A B B
2.2 225 A A B B
3.3 335 A A B B
4.7 475 A A B B B B
6.8 685 A B B B C
10 106 B B B C C
15 156 B B B C C
22 226 B C C D
33 336 B B C C C D
47 476 B C C C D
68 686 C C D D
100 107 C D D
150 157 C D D
220 227 D D
330 337 D
TECHNICAL SPECIFICATIONS
98
AVX Case Capacitance DCL DF ESR
Part No. Size µF (µA) % Max. (Ω)
Max. Max. @ 100 kHz
6.3 volt @ 85°C (4 volt @ 125°C)
TAAA225(*)006 A 2.2 0.5 4 N/A
TAAA335(*)006 A 3.3 0.5 4 N/A
TAAA475(*)006 A 4.7 0.5 4 N/A
TAAA685(*)006 A 6.8 0.5 6 5.0
TAAB156(*)006 B 15 1.0 6 2.3
TAAB336(*)006 B 3.3 1.0 6 2.0
TAAB476(*)006 B 47 3.0 6 1.6
TAAC686(*)006 C 68 4.5 6 1.0
TAAC157(*)006 C 150 9.5 8 0.8
TAAD227(*)006 D 220 14.0 8 0.6
TAAD337(*)006 D 330 20.0 8 0.5
10 volt @ 85°C (6.3 volt @ 125°C)
TAAA475(*)010 A 4.7 0.5 6 5.0
TAAB106(*)010 B 10 1.0 6 2.6
TAAB336(*)010 B 33 3.5 6 1.6
TAAC476(*)010 C 47 3.0 6 1.1
TAAC107(*)010 C 100 10.0 6 1.0
TAAD157(*)010 D 150 15.0 8 0.8
TAAD227(*)010 D 220 20.0 8 0.5
16 volt @ 85°C (10 volt @ 125°C)
TAAA335(*)016 A 3.3 0.5 6 6.0
TAAB685(*)016 B 6.8 0.8 6 2.5
TAAB156(*)016 B 15 2.4 6 2.0
TAAB226(*)016 B 22 3.5 6 1.6
TAAC336(*)016 C 33 5.8 6 1.2
TAAC476(*)016 C 47 7.3 6 1.0
TAAC686(*)016 C 68 10.0 6 0.8
TAAD107(*)016 D 100 15.0 6 0.7
TAAD157(*)016 D 150 20.0 8 0.5
20 volt @ 85°C (13 volt @ 125°C)
TAAA155(*)020 A 1.5 0.5 4 9.0
TAAA225(*)020 A 2.2 0.5 4 6.5
TAAB475(*)020 B 4.7 0.8 4 3.0
TAAB685(*)020 B 6.8 1.0 6 2.5
TAAB106(*)020 B 10 2.0 6 2.6
TAAB156(*)020 B 15 3.0 6 1.8
TAAC226(*)020 C 22 4.5 6 1.3
TAAC336(*)020 C 33 7.0 6 1.2
TAAC476(*)020 C 47 9.5 6 0.9
TAAD686(*)020 D 68 13.5 6 0.8
TAAD107(*)020 D 100 20.0 6 0.5
AVX Case Capacitance DCL DF ESR
Part No. Size µF (µA) % Max. (Ω)
Max. Max. @ 100 kHz
25 volt @ 85°C (17 volt @ 125°C)
TAAA684(*)025 A 6.8 0.5 4 9.5
TAAA155(*)025 A 1.5 0.5 4 7.5
TAAB475(*)025 B 4.7 1.2 4 2.8
TAAB106(*)025 B 10 2.5 6 2.0
TAAC336(*)025 C 33 8.5 6 1.0
TAAD686(*)025 D 68 15.0 6 0.6
35 volt @ 85°C (23 volt @ 125°C)
TAAA104(*)035 A 0.10 0.5 4 N/A
TAAA154(*)035 A 0.15 0.5 4 N/A
TAAA224(*)035 A 0.22 0.5 4 N/A
TAAA334(*)035 A 0.33 0.5 4 N/A
TAAA474(*)035 A 0.47 0.5 4 N/A
TAAA684(*)035 A 0.68 0.5 4 10.0
TAAA105(*)035 A 1.0 0.5 4 8.0
TAAB155(*)035 B 1.5 0.5 4 6.0
TAAB225(*)035 B 2.2 1.0 4 6.0
TAAB335(*)035 B 3.3 1.0 4 3.5
TAAB475(*)035 B 4.7 1.5 4 2.5
TAAB685(*)035 B 6.8 2.5 6 2.0
TAAC106(*)035 C 10 3.5 6 1.6
TAAC156(*)035 C 15 5.0 6 1.2
TAAC226(*)035 C 22 7.5 6 1.0
TAAD336(*)035 D 33 10.0 6 0.8
TAAD476(*)035 D 47 10.0 6 0.6
50 volt @ 85°C (33 volt @ 125°C)
TAAA104(*)050 A 0.10 0.5 4 N/A
TAAA154(*)050 A 0.15 0.5 4 N/A
TAAA224(*)050 A 0.22 0.5 4 N/A
TAAA334(*)050 A 0.33 0.5 4 N/A
TAAA474(*)050 A 0.47 0.5 4 N/A
TAAA684(*)050 A 0.68 0.5 4 10.0
TAAA105(*)050 A 1.0 0.5 4 8.0
TAAB155(*)050 B 1.5 0.8 4 6.0
TAAB225(*)050 B 2.2 1.1 6 6.0
TAAB335(*)050 B 3.3 1.7 6 3.5
TAAB475(*)050 B 4.7 2.4 6 2.5
TAAC685(*)050 C 6.8 3.4 6 2.0
TAAC106(*)050 C 10 5.0 6 1.6
TAAC156(*)050 C 15 7.5 6 1.2
TAAD226(*)050 D 22 11.0 6 1.0
(*) Insert capacitance tolerance code; M for ±20% and K for ±10%
NOTE: Voltage ratings are minimum values. AVX reserves the right to supply higher
voltage ratings in the same case size.
RATINGS AND PART NUMBER REFERENCE
Hermetic Axial Capacitors
TAA Series
99
Axial Capacitors
Tape and Reel Packaging
SOLID TANTALUM AXIAL TAR AND TAA
TAPE AND REEL PACKAGING FOR AUTOMATIC COMPONENT INSERTION
TAR and TAA series are supplied as standard on axial
bandolier, in reel format or ‘ammo’ pack for use on high
speed axial automatic insertion equipment, or preforming
machines.
The tape format is compatible with standards for com-
ponent taping set out by major manufacturers of axial
automatic insertion equipment.
TAPE SPECIFICATION REEL CONFIGURATION
Taper this
end
Colored
tape - + White tape
P
G
KE
L
7.00 max.
30 max.
400 max.
n
Shape: Circular or Octagonal
E max 1.60 (0.063)
G max 1.20 (0.047)
K
Component body shall be located centrally
within a window, width K, where K is 1.40 (0.060)
greater than the primary body length
L52.4 ± 1.50 (2.060 ± 0.060)
P5.00 ± 0.50 (0.200 ± 0.020)
leader max 400 (15.75)
trailer max 30.0 (1.200)
n
Will allow for unhindered reeling and unreeling
of the taped components. Preferred dimensions
73.0 (2.870) spacing.
DIMENSIONS:
millimeters (inches)
Case Size Number of Pieces
Q4500
R4000
S2500
W2500
Case Size Number of Pieces
A1000
B1000
C500
D500
PACKAGING QUANTITIES TAR
For reels
PACKAGING QUANTITIES TAA
For reels, Standard Suffix G
100
Section 4: Technical Summary and
Application Guidelines
INTRODUCTION
Tantalum capacitors are manufactured from a powder of pure
tantalum metal. OxiCap™ - niobium oxide capacitor is made
from niobium oxide NbO powder. The typical particle size is
between 2 and 10 µm.
Figure below shows typical powders. Note the very great
difference in particle size between the powder CVs/g.
4000µFV 20000µFV 50000µFV
Figure 1a. Tantalum powder
Figure 1b. Niobium Oxide powder
The powder is compressed under high pressure around a
Tantalum or Niobium wire (known as the Riser Wire) to form a
“pellet”. The riser wire is the anode connection to the capacitor.
This is subsequently vacuum sintered at high temperature
(typically 1200 - 1800°C) which produces a mechanically
strong pellet and drives off any impurities within the powder.
During sintering the powder becomes a sponge like
structure with all the particles interconnected in a huge
lattice.
This structure is of high mechanical strength and density, but
is also highly porous giving a large internal surface area (see
Figure 2).
The larger the surface area the larger the capacitance. Thus
high CV/g (capacitance voltage product per gram) powders,
which have a low average particle size, are used for low
voltage, high capacitance parts.
By choosing which powder and sinter temperature is used to
produce each capacitance/voltage rating the surface area
can be controlled.
The following example uses a 220µF 6V capacitor to illustrate
the point.
C=orA
d
where ois the dielectric constant of free space
(8.855 x 10
-12
Farads/m)
ris the relative dielectric constant
= 27 for Tantalum Pentoxide
= 41 for Niobium Pentoxide
d
is the dielectric thickness in meters
Cis the capacitance in Farads
and Ais the surface area in meters
Rearranging this equation gives:
A=Cd
or
thus for a 220µF/6V capacitor the surface area is 346 square
centimeters, or nearly one and a half times the size of this
page.
The dielectric is then formed over all the Tantalum or niobium
oxide surfaces by the electrochemical process of anodization.
To activate this, the “pellet” is dipped into a very weak solution
of phosphoric acid.
The dielectric thickness is controlled by the voltage applied
during the forming process. Initially the power supply is kept
in a constant current mode until the correct thickness of
dielectric has been reached (that is the voltage reaches the
‘forming voltage’), it then switches to constant voltage mode
and the current decays to close to zero.
Figure 2. Sintered Anode
101
The chemical equations describing the process are as
follows:
Tantalum Anode: 2 Ta → 2 Ta
5+
+ 10 e-
2 Ta
5+
+ 10 OH-→ Ta
2
O
5
+ 5 H
2
O
Niobium Oxide Anode:
2 NbO →2 NbO
3+
+ 6 e-
2 NbO
3+
+ 6 OH-→ Nb
2
O
5
+ 3 H
2
O
Cathode:
Tantalum: 10 H
2
O – 10 e → 5H
2
+ 10 OH-
Niobium Oxide: 6 H
2
O – 6 e-→ 3H
2
+ 6 OH-
The oxide forms on the surface of the Tantalum or Niobium
Oxide but it also grows into the material. For each unit of
oxide two thirds grows out and one third grows in. It is for
this reason that there is a limit on the maximum voltage rat-
ing of Tantalum & Niobium Oxide capacitors with present
technology powders (see Figure 3).
The dielectric operates under high electrical stress. Consider
a 220µF 6V part:
Formation voltage = Formation Ratio x Working Voltage
=3.5 x 6
=21 Volts
Tantalum:
The pentoxide (Ta2O5) dielectric grows at a rate of
1.7 x 10-9 m/V
Dielectric thickness (d) = 21 x 1.7 x 10
-9
= 0.036 µm
Electric Field strength = Working Voltage / d
= 167 KV/mm
Niobium Oxide:
The niobium oxide (Nb2O5) dielectric grows at a rate of
2.4 x 10-9 m/V
Dielectric thickness (d) = 21 x 2.4 x 10
-9
= 0.050 µm
Electric Field strength = Working Voltage / d
= 120 KV/mm
Figure 3. Dielectric layer
The next stage is the production of the cathode plate.
This is achieved by pyrolysis of Manganese Nitrate into
Manganese Dioxide.
The “pellet” is dipped into an aqueous solution of nitrate and
then baked in an oven at approximately 250°C to produce
the dioxide coat. The chemical equation is:
Mn (NO
3
)
2
→ MnO
2
+ 2NO
2 –
This process is repeated several times through varying
specific densities of nitrate to build up a thick coat over
all internal and external surfaces of the “pellet”, as shown in
Figure 4.
Figure 4. Manganese Dioxide Layer
The “pellet” is then dipped into graphite and silver to
provide a good connection to the Manganese Dioxide
cathode plate. Electrical contact is established by deposition
of carbon onto the surface of the cathode. The carbon
is then coated with a conductive material to facilitate connection
to the cathode termination (see Figure 5). Packaging is carried
out to meet individual specifications and customer require-
ments. This manufacturing technique is adhered to for the whole
range of AVX Tantalum capacitors, which can be subdivided into
four basic groups: Chip / Resin dipped / Rectangular boxed /
Axial.
Further information on production of Tantalum Capacitors
can be obtained from the technical paper “Basic Tantalum
Technology”, by John Gill, available from your local AVX
representative.
Figure 5. Cathode Termination
Tantalum
Manganese
Dioxide
Oxide Film
Dielectric
Tantalum
Dielectric
Oxide Film
Anode Manganese Graphite Outer Silver Cathode
Dioxide Silver Layer Epoxy Connection
Technical Summary and
Application Guidelines
102
1.1 CAPACITANCE
1.1.1 Rated capacitance (CR).
This is the nominal rated capacitance. For tantalum and
OxiCap™ capacitors it is measured as the capacitance of
the equivalent series circuit at 20°C using a measuring
bridge supplied by a 0.5V rms 120Hz sinusoidal signal, free
of harmonics with a bias of 2.2Vd.c.
1.1.2 Capacitance tolerance.
This is the permissible variation of the actual value of the
capacitance from the rated value. For additional reading,
please consult the AVX technical publication “Capacitance
Tolerances for Solid Tantalum Capacitors”.
1.1.3 Temperature dependence of capacitance.
The capacitance of a tantalum capacitor varies with temper-
ature. This variation itself is dependent to a small extent on
the rated voltage and capacitor size.
1.1.4 Frequency dependence of the capacitance.
The effective capacitance decreases as frequency increases.
Beyond 100kHz the capacitance continues to drop until res-
onance is reached (typically between 0.5 - 5MHz depending
on the rating). Beyond the resonant frequency the device
becomes inductive.
1.2 VOLTAGE
1.2.1 Rated d.c. voltage (VR).
This is the rated d.c. voltage for continuous operation at
85°C.
1.2.2 Category voltage (VC).
This is the maximum voltage that may be applied continu-
ously to a capacitor. It is equal to the rated voltage up to
+85°C, beyond which it is subject to a linear derating, to 2/3
VRat 125°C for tantalum and 2/3 VR at 105°C for OxiCap™.
1.2.3 Surge voltage (VS).
This is the highest voltage that may be applied to a capacitor
for short periods of time in circuits with minimum series
resistance of 33Ohms (CECC states 1kΩ). The surge voltage
may be applied up to 10 times in an hour for periods of up
to 30 seconds at a time. The surge voltage must not be used
as a parameter in the design of circuits in which, in the nor-
mal course of operation, the capacitor is periodically charged
and discharged.
100
120
80
60
40
20
0
75 85 95 105 115 125 135 150
MAXIMUM CATEGORY
VOLTAGE vs. TEMPERATURE
Rated Voltage (%)
Temperature (°C)
OxiCap™
Tantalum
THJ Series
NOS Series
CAPACITANCE vs. FREQUENCY
100 1000 10000 100000 1000000
Frequency (Hz)
250
Capacitance (µF)
200
150
100
50
0
Capacitance (%)
15
20
10
5
0
-5
-10
-15
-20
-50 -25 0 25 50 75 100 125
135150
TYPICAL CAPACITANCE vs. TEMPERATURE
Temperature (°C)
OxiCap™
Tantalum
THJ Series
NOS Series
SECTION 1
ELECTRICAL CHARACTERISTICS AND EXPLANATION OF TERMS
TAJE227K010
85°C Tantalum 125°C Tantalum*
Rated Voltage Surge Voltage Category Voltage Surge Voltage
(Vdc.) (Vdc.) (Vdc.) (Vdc.)
45.2 2.7 3.2
6.3 8.2 4.2 5.0
10 13.0 6.7 8.0
16 20.8 10.7 12.8
20 26.0 13.3 16.0
25 32.5 16.7 20.0
35 45.5 23.3 28.0
50 65.0 33.3 40.0
85°C OxiCap™ 105°C OxiCap™
Rated Voltage Surge Voltage Category Voltage Surge Voltage
(Vdc.) (Vdc.) (Vdc.) (Vdc.)
45.2 2.7 3.2
6.3 8.2 4.2 5.0
Technical Summary and
Application Guidelines
*For THJ 150°C Category & Surge voltage see THJ section on pages 47-49.
For individual part number please refer to SpiTan Software for frequency and temperature behavior found on AVX Corporation website.
103
1.2.4 Effect of surges
The solid Tantalum and OxiCap™ capacitors have a limited
ability to withstand voltage and current surges. This is in
common with all other electrolytic capacitors and is due to
the fact that they operate under very high electrical stress
across the dielectric. For example a 6 volt tantalum capacitor
has an Electrical Field of 167 kV/mm when operated at rated
voltage. OxiCap™ capacitors operate at electrical field sig-
nificantly less than 167 kV/mm.
It is important to ensure that the voltage across the terminals
of the capacitor never exceeds the specified surge voltage
rating.
Solid tantalum capacitors and OxiCap™ have a self healing
ability provided by the Manganese Dioxide semiconducting
layer used as the negative plate. However, this is limited in
low impedance applications. In the case of low impedance
circuits, the capacitor is likely to be stressed by current surges.
Derating the capacitor increases the reliability of the com-
ponent. (See Figure 2b page
109)
. The “AVX Recommended
Derating Table” (page 111) summarizes voltage rating
for use on common voltage rails, in low impedance appli-
cations for both Tantalum and OxiCap™ capacitors.
In circuits which undergo rapid charge or discharge a
protective resistor of 1Ω/V is recommended. If this is
impossible, a derating factor of up to 70% should be used
on tantalum capacitors. OxiCap™ capacitors can be used
with derating of 20% minimum.
In such situations a higher voltage may be needed than is
available as a single capacitor. A series combination should
be used to increase the working voltage of the equivalent
capacitor: For example, two 22µF 25V parts in series is equiv-
alent to one 11µF 50V part. For further details refer to J.A. Gill’s
paper “Investigation into the Effects of Connecting Tantalum
Capacitors in Series”, available from AVX offices worldwide.
NOTE:
While testing a circuit (e.g. at ICT or functional) it is likely that
the capacitors will be subjected to large voltage and current
transients, which will not be seen in normal use. These
conditions should be borne in mind when considering the
capacitor’s rated voltage for use. These can be controlled by
ensuring a correct test resistance is used.
1.2.5 Reverse voltage and Non-Polar operation.
The values quoted are the maximum levels of reverse voltage
which should appear on the capacitors at any time. These
limits are based on the assumption that the capacitors are
polarized in the correct direction for the majority of their
working life. They are intended to cover short term reversals
of polarity such as those occurring during switching tran-
sients of during a minor portion of an impressed waveform.
Continuous application of reverse voltage without normal
polarization will result in a degradation of leakage current. In
conditions under which continuous application of a reverse
voltage could occur two similar capacitors should be used in
a back-to-back configuration with the negative terminations
connected together. Under most conditions this combination
will have a capacitance one half of the nominal capacitance
of either capacitor. Under conditions of isolated pulses or
during the first few cycles, the capacitance may approach
the full nominal value. The reverse voltage ratings are designed
to cover exceptional conditions of small level excursions into
incorrect polarity. The values quoted are not intended to
cover continuous reverse operation.
The peak reverse voltage applied to the capacitor must not
exceed:
10% of the rated d.c. working voltage to a maximum of
1.0v at 25°C
3% of the rated d.c. working voltage to a maximum of
0.5v at 85°C
1% of the rated d.c. working voltage to a maximum of
0.1v at 125°C (0.1v at 150°C THJ Series)
Note: Capacitance and DF values of OxiCap™ may exceed
specification limits under these conditions.
1.2.6 Superimposed A.C. Voltage (Vr.m.s.) -
Ripple Voltage.
This is the maximum r.m.s. alternating voltage; superim-
posed on a d.c. voltage, that may be applied to a capacitor.
The sum of the d.c. voltage and peak value of the
superimposed a.c. voltage must not exceed the category
voltage, v.c.
Full details are given in Section 2.
1.2.7 Forming voltage.
This is the voltage at which the anode oxide is formed. The
thickness of this oxide layer is proportional to the formation volt-
age for a capacitor and is a factor in setting the rated voltage.
Technical Summary and
Application Guidelines
TAJD336M006
TAJD476M010
TAJD336M016
TAJC685M020
10
8
6
4
2
0
-2
-4
-6
-8
-10
Leakage Current (µA)
-20 0 20 40 60 80 100
Applied Voltage (Volts)
LEAKAGE CURRENT vs. BIAS VOLTAGE
104
1.3 DISSIPATION FACTOR AND
TANGENT OF LOSS ANGLE (TAN )
1.3.1 Dissipation factor (D.F.).
Dissipation factor is the measurement of the tangent of the
loss angle (tan ) expressed as a percentage. The measure-
ment of DF is carried out using a measuring bridge that
supplies a 0.5V rms 120Hz sinusoidal signal, free of
harmonics with a bias of 2.2Vdc. The value of DF is temperature
and frequency dependent.
Note: For surface mounted products the maximum allowed
DF values are indicated in the ratings table and it is important
to note that these are the limits met by the component
AFTER soldering onto the substrate.
1.3.2 Tangent of Loss Angle (tan ).
This is a measurement of the energy loss in the capacitor. It
is expressed, as tan and is the power loss of the capacitor
divided by its reactive power at a sinusoidal voltage of spec-
ified frequency. Terms also used are power factor, loss factor
and dielectric loss. Cos (90 - ) is the true power factor. The
measurement of tan is carried out using a measuring
bridge that supplies a 0.5V rms 120Hz sinusoidal signal, free
of harmonics with a bias of 2.2Vdc.
1.3.3 Frequency dependence of Dissipation Factor.
Dissipation Factor increases with frequency as shown in the
typical curves that are for tantalum and OxiCap™ capacitors
identical:
Typical DF vs Frequency
1.3.4 Temperature dependence of Dissipation
Factor.
Dissipation factor varies with temperature as the typical curves
show. These plots are identical for both Tantalum and OxiCap™
capacitors. For maximum limits please refer to ratings tables.
Typical DF vs Temperature
1.4 IMPEDANCE, (Z) AND EQUIVALENT
SERIES RESISTANCE (ESR)
1.4.1 Impedance, Z.
This is the ratio of voltage to current at a specified frequency.
Three factors contribute to the impedance of a Tantalum capac-
itor; the resistance of the semiconductor layer; the capacitance
value and the inductance of the electrodes and leads.
At high frequencies the inductance of the leads becomes
a limiting factor. The temperature and frequency behavior
of these three factors of impedance determine the behavior
of the impedance Z. The impedance is measured at 20°C
and 100kHz.
1.4.2 Equivalent Series Resistance, ESR.
Resistance losses occur in all practical forms of capacitors.
These are made up from several different mechanisms,
including resistance in components and contacts, viscous
forces within the dielectric and defects producing bypass
current paths. To express the effect of these losses they are
considered as the ESR of the capacitor. The ESR is frequency
dependent and can be found by using the relationship;
ESR = tan δ
2πfC
Where f is the frequency in Hz, and C is the capacitance in
farads.
The ESR is measured at 20°C and 100kHz.
ESR is one of the contributing factors to impedance, and
at high frequencies (100kHz and above) it becomes the
dominant factor. Thus ESR and impedance become almost
identical, impedance being only marginally higher.
1.4.3 Frequency dependence of Impedance and ESR.
ESR and Impedance both increase with decreasing frequency.
At lower frequencies the values diverge as the extra contri-
butions to impedance (due to the reactance of the capacitor)
become more significant. Beyond 1MHz (and beyond the
resonant point of the capacitor) impedance again increases
due to the inductance of the capacitor. Typical ESR and
Impedance values are similar for both tantalum and niobium
oxide materials and thus the same charts are valid for both
for Tantalum and OxiCap™ capacitors.
Typical ESR vs Frequency
5
4.5
4
3.5
3
2.5
2
1.5
1
0.5
0
0.1 1 10
ESR Multiplier
Frequency (kHz)
Tantalum
OxiCap™
100 1000
1.8
1.7
1.6
1.5
1.4
1.3
1.2
1.1
1
0.9
0.8
-55 -5 45 95
Temperature (Celcius)
Tantalum
OxiCap™
DF Multiplier
50
5
1
0.1
0.1 1 10 100
Frequency (kHz)
Tantalum OxiCap™
DF Multiplier
Technical Summary and
Application Guidelines
105
Technical Summary and
Application Guidelines
Typical Impedance vs Frequency
1.4.4 Temperature dependence of the Impedance
and ESR.
At 100kHz, impedance and ESR behave identically and
decrease with increasing temperature as the typical curves
show.
Typical 100kHz ESR vs Temperature
1.5 D.C. LEAKAGE CURRENT
1.5.1 Leakage current.
The leakage current is dependent on the voltage applied,
the elapsed time since the voltage was applied and the
component temperature. It is measured at +20°C with the
rated voltage applied. A protective resistance of 1000Ω
is connected in series with the capacitor in the measuring
circuit. Three to five minutes after application of the rated
voltage the leakage current must not exceed the maximum
values indicated in the ratings table. These are based on
the formula 0.01CV or 0.5µA (whichever is the greater) for
tantalum and 0.02CV or 1.0µA (whichever is the greater) for
OxiCap™ capacitors.
Reforming of Tantalum or OxiCap™ capacitors is unnecessary
even after prolonged storage periods without the application
of voltage.
1.5.2 Temperature dependence of the leakage
current.
The leakage current increases with higher temperatures;
typical values are shown in the graph. For operation between
85°C and 125°C, the maximum working voltage must be
derated and can be found from the following formula.
Vmax = 1- (T - 85)
x VR
125
where T is the required operating temperature.
LEAKAGE CURRENT vs. TEMPERATURE
1.5.3 Voltage dependence of the leakage current.
The leakage current drops rapidly below the value corre-
sponding to the rated voltage VRwhen reduced voltages are
applied. The effect of voltage derating on the leakage current
is shown in the graph. This will also give a significant increase
in the reliability for any application. See Section 3.1 (page
109) for details.
For additional information on Leakage Current, please
consult the AVX technical publication “Analysis of Solid
Tantalum Capacitor Leakage Current” by R. W. Franklin.
1.5.4 Ripple current.
The maximum ripple current allowed is derived from the power
dissipation limits for a given temperature rise above ambient
temperature (please refer to Section 2, pages 106-108).
1.6 SELF INDUCTANCE (ESL)
The self-inductance value (ESL) can be important for resonance
frequency evaluation. See figure below typical ESL values per
case size.
TAJ/TPS/THJ/TRJ/TPM/
CWR11/NOJ/NOS TAC
1
0.1
0.01
020 40 60 80 100
Rated Voltage (VR) %
Leakage Current
ratio I/IVR
LEAKAGE CURRENT vs. RATED VOLTAGE
Typical
Range
-55 -40 -20 0 20 40 60 80 100 125 150
10
15
1
0.1
Temperature (°C)
Tantalum
OxiCap™
Leakage current
ratio I/IR20
02040
Temperature (Celcius)
Tantalum
OxiCap™
Change in ESR
60 80 100 125 150-20-40
-55
1.8
1.7
1.6
1.5
1.4
1.3
1.2
1.1
1
0.9
0.8
100
10
1
0.1
0.1 1 10
Frequency (kHz)
Tantalum
OxiCap™
Impedance Multiplier
100 1000
Typical Self- Typical Self
Case Inductance Case Inductance
Size value (nH) Size value (nH)
A1.8 T 1.8
B1.8 V 2.4
C2.2 W 2.2
D2.4 Y 2.4
E2.5 X 2.4
R1.4 P 1.4
S1.8
Typical Self-
Case Inductance
Size value (nH)
K1.1
L1.2
R1.4
106
Technical Summary and
Application Guidelines
2.1 RIPPLE RATINGS (A.C.)
In an a.c. application heat is generated within the capacitor
by both the a.c. component of the signal (which will depend
upon the signal form, amplitude and frequency), and by the
d.c. leakage. For practical purposes the second factor is
insignificant. The actual power dissipated in the capacitor is
calculated using the formula:
P = I2 R
and rearranged to I = SQRT (P⁄R) .....(Eq. 1)
where I = rms ripple current, amperes
R= equivalent series resistance, ohms
U = rms ripple voltage, volts
P= power dissipated, watts
Z= impedance, ohms, at frequency under
consideration
Maximum a.c. ripple voltage (Umax).
From the Ohms’ law equation:
Umax = IR .....(Eq. 2)
Where P is the maximum permissible power dissipated as
listed for the product under consideration (see tables).
However care must be taken to ensure that:
1. The d.c. working voltage of the capacitor must not be
exceeded by the sum of the positive peak of the applied
a.c. voltage and the d.c. bias voltage.
2. The sum of the applied d.c. bias voltage and the negative
peak of the a.c. voltage must not allow a voltage reversal
in excess of the “Reverse Voltage”.
Historical ripple calculations.
Previous ripple current and voltage values were calculated
using an empirically derived power dissipation required to
give a 10°C rise of the capacitors body temperature from
room temperature, usually in free air. These values are shown
in Table I. Equation 1 then allows the maximum ripple current
to be established, and Equation 2, the maximum ripple
voltage. But as has been shown in the AVX article on thermal
management by I. Salisbury, the thermal conductivity of a
Tantalum chip capacitor varies considerably depending upon
how it is mounted.
SECTION 2
A.C. OPERATION, RIPPLE VOLTAGE AND RIPPLE CURRENT
Max. power dissipation (W)
Tantalum OxiCapTM
TAJ/TPS/THJ/
Case TRJ/TCJ/TLJ/ TPM NOJ/NOS NOM
size CWR11
A0.075 — 0.090 —
B0.085 — 0.102 —
C0.110 — 0.132 —
D0.150 — 0.180 —
E0.165 0.270 0.198 0.324
R0.055 — — —
S0.065 — — —
T0.080 — — —
V0.250 0.285 0.300 —
W0.090 — — —
Y0.125 — — —
X0.100 — — —
P0.060 — — —
Case Max. power
size dissipation (W)
A0.050
B0.070
C0.075
D0.080
E0.090
F0.100
G0.125
H0.150
Case Max. power
size dissipation (W)
K0.015
L0.025
R0.045
H0.040
U0.035
X0.040
A0.040
Temperature correction factor
for ripple current
Temp. °C Factor
+25 1.00
+55 0.95
+85 0.90
+125 0.40
+150 0.20
(THJ)
Temperature correction factor
for ripple current
Temp. °C Factor
+25 1.00
+55 0.95
+85 0.90
+105 0.40
+125 (NOS) 0.40
TACmicrochip™
NOJ/NOS
TAJ/TPS/THJ/TRJ/TPM/TCJ/TLJ/CWR11/NOJ/NOS/NOM
Series Molded Chip
TAZ/CWR09
Series Molded Chip
TAJ/TPS/THJ/TRJ/TPM
TCJ/TLJ/CWR11/TAZ
CWR09/TAC
Series Molded Chip
Table I: Power Dissipation Ratings (In Free Air)
107
Technical Summary and
Application Guidelines
A piece of equipment was designed which would pass sine
and square wave currents of varying amplitudes through a
biased capacitor. The temperature rise seen on the body for
the capacitor was then measured using an infra-red probe.
This ensured that there was no heat loss through any thermo-
couple attached to the capacitor’s surface.
Results for the C, D and E case sizes
Several capacitors were tested and the combined results are
shown above. All these capacitors were measured on FR4
board, with no other heat sinking. The ripple was supplied at
various frequencies from 1kHz to 1MHz.
As can be seen in the figure above, the average Pmax value
for the C case capacitors was 0.11 Watts. This is the same
as that quoted in Table I.
The D case capacitors gave an average Pmax value 0.125
Watts. This is lower than the value quoted in the Table I by
0.025 Watts. The E case capacitors gave an average Pmax of
0.200 Watts that was much higher than the 0.165 Watts
from Table I.
If a typical capacitor’s ESR with frequency is considered, e.g.
figure below, it can be seen that there is variation. Thus for a
set ripple current, the amount of power to be dissipated by
the capacitor will vary with frequency. This is clearly shown in
figure in top of next column, which shows that the surface
temperature of the unit raises less for a given value of ripple
current at 1MHz than at 100kHz.
The graph below shows a typical ESR variation with frequency.
Typical ripple current versus temperature rise for 100kHz and
1MHz sine wave inputs.
If I2R is then plotted it can be seen that the two lines are in
fact coincident, as shown in figure below.
Example
A Tantalum capacitor is being used in a filtering application,
where it will be required to handle a 2 Amp peak-to-peak,
200kHz square wave current.
A square wave is the sum of an infinite series of sine waves
at all the odd harmonics of the square waves fundamental
frequency. The equation which relates is:
ISquare = Ipksin (2πƒ) + Ipksin (6πƒ) + Ipksin (10πƒ) + Ipksin (14πƒ) +...
Thus the special components are:
Let us assume the capacitor is a TAJD686M006
Typical ESR measurements would yield.
Thus the total power dissipation would be 0.069 Watts.
From the D case results shown in figure top of previous
column, it can be seen that this power would cause the
capacitors surface temperature to rise by about 5°C.
For additional information, please refer to the AVX technical
publication “Ripple Rating of Tantalum Chip Capacitors” by
R.W. Franklin.
70.00
60.00
50.00
40.00
30.00
20.00
10.00
0.00
0.00 0.05 0.45
0.10 0.15 0.20 0.25 0.30 0.35 0.40 0.50
FR
Temperature Rise (°C)
100KHz
1 MHz
70
60
50
40
30
20
10
0
0.00 0.20 0.40 0.60 0.80 1.00 1.20
RMS current (Amps)
Temperature rise (°C)
100KHz
1 MHz
ESR vs. FREQUENCY
(TPSE107M016R0100)
ESR (Ohms)
1
0.1
0.01
100 1000 10000 100000 1000000
Frequency (Hz)
100
90
80
70
60
50
40
30
20
10
0
00.1 0.2 0.3 0.4 0.5
Power (Watts)
Temperature rise (
oC)
C case
D case
E case
Frequency Typical ESR Power (Watts)
(Ohms) Irms2x ESR
200 KHz 0.120 0.060
600 KHz 0.115 0.006
1 MHz 0.090 0.002
1.4 MHz 0.100 0.001
Frequency Peak-to-peak current RMS current
(Amps) (Amps)
200 KHz 2.000 0.707
600 KHz 0.667 0.236
1 MHz 0.400 0.141
1.4 MHz 0.286 0.101
108
The heat generated inside a tantalum capacitor in a.c.
operation comes from the power dissipation due to ripple
current. It is equal to I2R, where I is the rms value of the
current at a given frequency, and R is the ESR at the same
frequency with an additional contribution due to the leakage
current. The heat will be transferred from the outer surface by
conduction. How efficiently it is transferred from this point is
dependent on the thermal management of the board.
The power dissipation ratings given in Section 2.1 (pages
105-107) are based on free-air calculations. These ratings
can be approached if efficient heat sinking and/or forced cooling
is used.
In practice, in a high density assembly with no specific
thermal management, the power dissipation required to give
a 10°C rise above ambient may be up to a factor of 10
less. In these cases, the actual capacitor temperature should
be established (either by thermocouple probe or infra-red
scanner) and if it is seen to be above this limit it may
be necessary to specify a lower ESR part or a higher
voltage rating.
Please contact application engineering for details or contact
the AVX technical publication entitled “Thermal Management
of Surface Mounted Tantalum Capacitors” by Ian Salisbury.
OxiCap™ capacitors showing 20% higher power dissipation
allowed compared to tantalum capacitors as a result of twice
higher specific heat of niobium oxide compared to Tantalum
powders. (Specific heat is related to energy necessary to
heat a defined volume of material to a specified temperature.)
Technical Summary and
Application Guidelines
2.3 THERMAL MANAGEMENT
LEAD FRAME
SOLDER
ENCAPSULANT
COPPER
PRINTED CIRCUIT BOARD
TANTALUM
ANODE
121 C\WATT
73 C\WATT
236 C\WATT
X - RESULTS OF RIPPLE CURRENT TEST - RESIN BODY
X
X
X
TEMPERATURE DEG C
THERMAL IMPEDANCE GRAPH
C CASE SIZE CAPACITOR BODY
140
120
100
80
60
40
20
00 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 1.3 1.4
POWER IN UNIT CASE, DC WATTS
= PCB MAX Cu THERMAL = PCB MIN Cu AIR GAP = CAP IN FREE AIR
Thermal Dissipation from the Mounted Chip
Thermal Impedance Graph with Ripple Current
2.2 OXICAP™ RIPPLE RATING
109
Technical Summary and
Application Guidelines
SECTION 3
RELIABILITY AND CALCULATION OF FAILURE RATE
3.1 STEADY-STATE
Both Tantalum and Niobium Oxide dielectric have essentially
no wear out mechanism and in certain circumstances is
capable of limited self healing. However, random failures can
occur in operation. The failure rate of Tantalum capacitors will
decrease with time and not increase as with other electrolytic
capacitors and other electronic components.
Figure 1. Tantalum and OxiCap™ Reliability Curve
The useful life reliability of the Tantalum and OxiCap™ capacitors
in steady-state is affected by three factors. The equation from
which the failure rate can be calculated is:
F = FVx FTx FRx FB
where FVis a correction factor due to operating
voltage/voltage derating
FTis a correction factor due to operating
temperature
FRis a correction factor due to circuit series
resistance
FBis the basic failure rate level
FB= 1.0% / 1000 hours for TPS, TAJ, TAC, TPM
and TCJ
0.5% / 1000 hours for TRJ, THJ and NOJ
0.2% / 100 hours for NOS, NOM and TLJ
Base failure rate.
Standard Tantalum and OxiCap™ products conform to Level
M reliability or better (i.e., 1%/1000 hrs.) at rated voltage,
rated temperature, and 0.1Ω/volt circuit impedance. This
is known as the base failure rate, FB, which is used for
calculating operating reliability. The effect of varying the
operating conditions on failure rate is shown on this page.
Operating voltage/voltage derating.
If a capacitor with a higher voltage rating than the maximum
line voltage is used, then the operating reliability will be
improved. This is known as voltage derating.
The graph, Figure 2a, shows the relationship between volt-
age derating (the ratio between applied and rated voltage)
and the failure rate. The graph gives the correction factor FU
for any operating voltage.
Figure 2a. Correction factor to failure rate FRfor voltage
derating of a typical component (60% con. level).
Figure 2b. Gives our recommendation for voltage derating
for tantalum capacitors to be used in typical applications.
Figure 2c. Gives voltage derating recommendations for
tantalum capacitors as a function of circuit impedance.
Recommended Range
1.0
0.9
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0
0.01 0.1 1.0 10
Circuit Resistance
(
Ohm/V
)
Working Voltage/Rated Voltage
100 1000 10000
OxiCap™
Specified Range in
Low Impedance Circuit
Specified Range
in General Circuit
40
30
20
10
04 6.3 10 16 20 25
Rated Voltage (V)
Operating Voltage (V)
35 50
Infinite Useful Life
Useful life reliability can be altered by voltage
derating, temperature or series resistance
Infant
Mortalities
10.0
1.0
0.1
0.01
0.001
0.0001
0 0.1 0.2 0.3 0.4 0.5 0.6
Applied Voltage/Rated Voltage
Correction Factor
0.7 0.8 0.9 1.0 1.1 1.2
Tantalum/OxiCapTM
FR
110
Technical Summary and
Application Guidelines
Operating Temperature.
If the operating temperature is below the rated temperature
for the capacitor then the operating reliability will be improved
as shown in Figure 3. This graph gives a correction factor FT
for any temperature of operation.
Figure 3: Correction factor to failure rate FRfor ambient
temperature T for typical component
(60% con. level).
Circuit Impedance.
All solid Tantalum and/or niobium oxide capacitors require
current limiting resistance to protect the dielectric from surges.
A series resistor is recommended for this purpose. A lower
circuit impedance may cause an increase in failure rate,
especially at temperatures higher than 20°C. An inductive low
impedance circuit may apply voltage surges to the capacitor
and similarly a non-inductive circuit may apply current surges
to the capacitor, causing localized over-heating and failure.
The recommended impedance is 1 Ωper volt. Where this is
not feasible, equivalent voltage derating should be used
(See MIL HANDBOOK 217E). The graph, Figure 4, shows
the correction factor, FR, for increasing series resistance.
Figure 4. Correction factor to failure rate FRfor series
resistance R on basic failure rate FBfor a typical component
(60% con. level).
For circuit impedances below 0.1 ohms per volt, or for any
mission critical application, circuit protection should be
considered. An ideal solution would be to employ an AVX
SMT thin-film fuse in series.
Example calculation.
Consider a 12 volt power line. The designer needs about
10µF of capacitance to act as a decoupling capacitor near a
video bandwidth amplifier. Thus the circuit impedance will be
limited only by the output impedance of the board’s power
unit and the track resistance. Let us assume it to be about
2 Ohms minimum, i.e. 0.167 Ohms/Volt. The operating
temperature range is -25°C to +85°C.
If a 10µF 16 Volt capacitor was designed in the operating
failure rate would be as follows.
a) FT= 1.0 @ 85°C
b) FR= 0.85 @ 0.167 Ohms/Volt
c) FV= 0.08 @ applied voltage/rated
voltage = 75%
d) FB= 1%/1000 hours, basic failure rate level
Thus F = 1.0 x 0.85 x 0.08 x 1 = 0.068%/1000 Hours
If the capacitor was changed for a 20 volt capacitor, the
operating failure rate will change as shown.
FV= 0.018 @ applied voltage/rated voltage = 60%
F = 1.0 x 0.85 x 0.018 x 1 = 0.0153%/1000 Hours
3.2 Dynamic.
As stated in Section 1.2.4 (page 103), the solid capacitor has
a limited ability to withstand voltage and current surges.
Such current surges can cause a capacitor to fail. The
expected failure rate cannot be calculated by a simple
formula as in the case of steady-state reliability. The two
parameters under the control of the circuit design engineer
known to reduce the incidence of failures are derating and
series resistance.
The table below summarizes the results of trials carried out
at AVX with a piece of equipment, which has very low series
resistance with no voltage derating applied. That is if the
capacitor was tested at its rated voltage. It has been tested
on tantalum capacitors, however the conclusions are valid
for both tantalum and OxiCap™ capacitors.
Results of production scale derating experiment
As can clearly be seen from the results of this experiment,
the more derating applied by the user, the less likely the
probability of a surge failure occurring.
It must be remembered that these results were derived from
a highly accelerated surge test machine, and failure rates in
the low ppm are more likely with the end customer.
A commonly held misconception is that the leakage current
of a Tantalum capacitor can predict the number of failures
which will be seen on a surge screen. This can be disproved
by the results of an experiment carried out at AVX on 47µF
Capacitance Number of 50% derating No derating
and Voltage units tested applied applied
47µF 16V 1,547,587 0.03% 1.1%
100µF 10V 632,876 0.01% 0.5%
22µF 25V 2,256,258 0.05% 0.3%
0
100.0
1000.0
10.0
1.0
0.1
0.01
4020 60 80 100 120 140 160
Temperature (C)
Tantalum
NOJ
NOS
Correction Factor
FT
Circuit
resistance FR
ohms/volt
3.0 0.07
2.0 0.1
1.0 0.2
0.8 0.3
0.6 0.4
0.4 0.6
0.2 0.8
0.1 1.0
111
Technical Summary and
Application Guidelines
10V surface mount capacitors with different leakage
currents. The results are summarized in the table below.
Leakage current vs number of surge failures.
Again, it must be remembered that these results were
derived from a highly accelerated surge test machine,
and failure rates in the low ppm are more likely with the end
customer.
OxiCap™ capacitor is less sensitive to an overloading stress
compared to Tantalum and so a 20% minimum derating is
recommended. It may be necessary in extreme low impedance
circuits of high transient or ‘switch-on’ currents to derate the
voltage further. Hence in general a lower voltage OxiCap™ part
number can be placed on a higher rail voltage compared to the
tantalum capacitor – see table below.
AVX recommended derating table.
For further details on surge in Tantalum capacitors refer
to J.A. Gill’s paper “Surge in Solid Tantalum Capacitors”,
available from AVX offices worldwide.
An added bonus of increasing the derating applied in a
circuit, to improve the ability of the capacitor to withstand
surge conditions, is that the steady-state reliability is
improved by up to an order. Consider the example of a
6.3 volt capacitor being used on a 5 volt rail.
The steady-state reliability of a Tantalum capacitor is affected by
three parameters; temperature, series resistance and voltage
derating. Assume 40°C operation and 0.1 Ohms/Volt series
resistance.
The capacitors reliability will therefore be:
Failure rate = FUx FTx FRx 1%/1000 hours
=0.15 x 0.1 x 1 x 1%/1000 hours
=0.015%/1000 hours
If a 10 volt capacitor was used instead, the new scaling factor
would be 0.006, thus the steady-state reliability would be:
Failure rate = FUx FTx FRx 1%/1000 hours
=0.006 x 0.1 x 1 x 1%/1000 hours
=6 x 10-4 %/1000 hours
Number tested Number failed surge
Standard leakage range 10,000 25
0.1 µA to 1µA
Over Catalog limit 10,000 26
5µA to 50µA
Classified Short Circuit 10,000 25
50µA to 500µA
Voltage Rail Rated Voltage of Cap (V)
(V) Tantalum OxiCap™
3.3 6.3 4
510 6.3
10 20 –
12 25 –
15 35 –
>24 Series Combination –
112
Technical Summary and
Application Guidelines
So there is an order improvement in the capacitors steady-
state reliability.
Soldering Conditions and Board Attachment.
The soldering temperature and time should be the minimum
for a good connection.
A suitable combination for wavesoldering is 230°C - 250°C
for 3 - 5 seconds.
For vapor phase or infra-red reflow soldering the profile
below shows allowable and dangerous time/temperature
combinations. The profile refers to the peak reflow tempera-
ture and is designed to ensure that the temperature of
the internal construction of the capacitor does not exceed
220°C. Preheat conditions vary according to the reflow
system used, maximum time and temperature would be 10
minutes at 150°C. Small parametric shifts may be noted
immediately after reflow, components should be allowed to
stabilize at room temperature prior to electrical testing.
Reflow profile requirements may be affected by lead
environmental concerns and thus lead-free soldering
system introduction within electronic industry.
Both Tantalum and OxiCap™ are lead-free system compatible
components. See the next section for AVX recommendation
and details.
TAJ, NOJ and TAZ series are designed for reflow and wave sol-
dering operations. In addition, these series are available with
gold termination options compatible with conductive epoxy
mounting. Gold finish suitable for wire bonding for hybrid
assemblies are available upon request.
Under the CECC 00 802 International Specification, AVX
Tantalum capacitors and OxiCap™ are Class A components.
The capacitors can therefore be subjected to one IR reflow,
one wave solder and one soldering iron cycle. If more
aggressive mounting techniques are to be used please
consult AVX Tantalum for guidance.
Dangerous Range
Allowable Range
with Preheat
Allowable
Range
with Care
270
260
250
240
230
220
210
200
0 2 4 6 8 10 12
Soldering Time (secs.)
Allowable range of peak temp./time combination for wave soldering
Temperature (°C)
DANGEROUS RANGE
ALLOWABLE
RANGE WITH CARE
RECOMMENDED RANGE
0 15 30 45 60
TIME IN SECONDS
260
250
240
230
220
210
Temperature ( C)
o
Allowable range of peak temp./time combination for IR reflow
SECTION 4
APPLICATION GUIDELINES FOR TANTALUM AND OXICAP™ CAPACITORS
113
Technical Summary and
Application Guidelines
220
200
180
160
140
120
100
80
60
40
200 0.5 1 1.5 2
Time (Minutes)
Component Land Temperature (°C)
2.5 3 3.5 4 4.5 5
Additional soak
time to allow
uniform heating
of the substrate
Assembly enters
the preheat zone 45-60 Sec.
above solder
melting point
Soak Time
1.) Activates the flux
2.) Allows center of board
temperature to catch up
with corners.
186° Solder
melting
temperature
Assembly exits heat
no forced cooldown
260
220
180
140
100
60
20
Time (Seconds)
Temperature (°C)
0102030405060708090100110120
100°C – 150°C Max*
3 – 5 Seconds
Natural
Cooling
Enter Wave
*See appropriate
product specification
IR REFLOW
WAVE SOLDERING
Recommended Ramp Rate Less than 2°C/sec.
SECTION 4 (continued)
APPLICATION GUIDELINES FOR TANTALUM AND OXICAP™ CAPACITORS
Recommended soldering profiles for surface mounting of tantalum capacitors is provided in figure below.
AVX also offers 100% Tin termination finish on its TAJ, TPS,
THJ, NOJ and NOS series surface mount Tantalum capacitors.
After that date all products are available with lead-free termi-
nations per requests. Refer the the first page of each series
for order.
TAC standard termination is barrier nickel overplated with
pure tin (Lead-Free).
A barrier nickel and gold termination suitable for conductive
epoxy is available. Other gold finishes are available upon
request.
The 100% Tin termination is compatible with and all common
lead free pastes; SnCu, SnAgCu, SnCuAgBi, etc.
It is also compatible with existing SnPb solder pastes /
systems in use today.
The recommended IR reflow profile is shown below.
RECOMMENDED LEAD-FREE REFLOW
PROFILE
LEAD-FREE WAVE SOLDERING
The recommended peak temperature for lead-free wave
soldering is 250°C-260°C for 3-5 seconds. The other param-
eters of the profile remains the same as above.
MOISTURE SENSITIVITY LEVELS
(according to J-STD-020C)
Level 1 for TAJ, TPS, THJ, TRJ, TPM, NOJ, NOS, NOM
Level 3 for TLJ, TCJ
300
250
200
150
100
50
0050100 150 200 250 300
• Pre-heating: 150°C ±15°C / 60-90s
• Max. Peak Gradient 2.5°C/s
• Peak Temperature: 245°C ±5°C
• Time at >230°C: 40s Max.
Temperature °C
Time (s)
LEAD-FREE PROGRAM
GENERAL LEAD-FREE NOTES
The following should be noted by customers changing from
lead based systems to the new lead free pastes.
a) The visual standards used for evaluation of solder joints
will need to be modified as lead free joints are not as bright
as with tin-lead pastes and the fillet may not be as large.
b) Resin color may darken slightly due to the increase in
temperature required for the new pastes.
c) Lead-free solder pastes do not allow the same self align-
ment as lead containing systems. Standard mounting
pads are acceptable, but machine set up may need to be
modified.
114
5.1 Acceleration
98.1m/s2(10g)
5.2 Vibration Severity
10 to 2000Hz, 0.75mm of 98.1m/s2(10g)
5.3 Shock
Trapezoidal Pulse, 98.1m/s2for 6ms.
5.4 Adhesion to Substrate
IEC 384-3. minimum of 5N.
5.5 Resistance to Substrate Bending
The component has compliant leads which reduces
the risk of stress on the capacitor due to substrate
bending.
5.6 Soldering Conditions
Dip soldering is permissible provided the solder bath
temperature is 270°C, the solder time 3 seconds
and the circuit board thickness 1.0mm.
5.7 Installation Instructions
The upper temperature limit (maximum capacitor surface
temperature) must not be exceeded even under the
most unfavorable conditions when the capacitor is
installed. This must be considered particularly when it
is positioned near components which radiate heat
strongly (e.g. valves and power transistors).
Furthermore, care must be taken, when bending
the wires, that the bending forces do not strain the
capacitor housing.
5.8 Installation Position
No restriction.
5.9 Soldering Instructions
Fluxes containing acids must not be used.
5.9.1 Guidelines for Surface Mount Footprints
Component footprint and reflow pad design for AVX
capacitors.
The component footprint is defined as the maximum board
area taken up by the terminators. The footprint dimensions
are given by A, B, C and D in the diagram, which corre-
sponds to W, max., A max., S min. and L max. for the com-
ponent. The footprint is symmetric about the center lines.
The dimensions x, y and z should be kept to a minimum
to reduce rotational tendencies while allowing for visual
inspection of the component and its solder fillet.
Dimensions PS (Pad Separation) and PW (Pad Width) are
calculated using dimensions x and z. Dimension y may
vary, depending on whether reflow or wave soldering is to
be performed.
For reflow soldering, dimensions PL (Pad Length), PW (Pad
Width), and PSL (Pad Set Length) have been calculated. For
wave soldering the pad width (PWw) is reduced to less than
the termination width to minimize the amount of solder pick
up while ensuring that a good joint can be produced.
NOTE: These recommendations (also in compliance with EIA) are guidelines
only. With care and control, smaller footprints may be considered for
reflow soldering.
Nominal footprint and pad dimensions for each case size are
given in the following tables:
PAD DIMENSIONS: millimeters (inches)
NOTE: TAJ has a common footprint with TPS/TRJ/THJ/TPM & CWR11 Series.
5.10 PCB Cleaning
Ta chip capacitors are compatible with most PCB board
cleaning systems.
If aqueous cleaning is performed, parts must be allowed
to dry prior to test. In the event ultrasonics are used power
levels should be less than 10 watts per/litre, and care must
be taken to avoid vibrational nodes in the cleaning bath.
SECTION 6
EPOXY FLAMMABILITY
SECTION 7
QUALIFICATION APPROVAL STATUS
DESCRIPTION STYLE SPECIFICATION
Surface mount TAJ CECC 30801 - 005 Issue 2
capacitors CECC 30801 - 011 Issue 1
MIL-C-55365/8 (CWR11)
TAZ MIL-C-55365/4 (CWR09)
EPOXY UL RATING OXYGEN INDEX
TAJ/TPS/TRJ/THJ/ UL94 V-0 35%
TPM/CWR11
A
x
Y
D
CB
z
PW
PL PS
PSL
SECTION 5
MECHANICAL AND THERMAL PROPERTIES OF CAPACITORS
Technical Summary and
Application Guidelines
Case Size PSL PL PS PW PWw
A3.80 (0.150) 1.40 (0.054) 1.00 (0.039) 1.80 (0.071) 0.90 (0.035)
B4.00 (0.157) 1.40 (0.054) 1.20 (0.047) 2.80 (0.110) 1.60 (0.063)
C6.50 (0.256) 2.00 (0.079) 2.50 (0.098) 2.80 (0.110) 1.60 (0.063)
D8.00 (0.315) 2.00 (0.079) 4.00 (0.157) 3.00 (0.119) 1.70 (0.068)
E8.00 (0.315) 2.00 (0.079) 4.00 (0.157) 3.00 (0.119) 1.70 (0.068)
R2.70 (0.100) 0.95 (0.037) 0.80 (0.030) 1.60 (0.060) 0.80 (0.030)
S3.80 (0.150) 1.40 (0.054) 1.00 (0.039) 1.80 (0.071) 0.90 (0.035)
T4.00 (0.157) 1.40 (0.054) 1.20 (0.047) 2.80 (0.110) 1.60 (0.063)
V8.00 (0.315) 2.00 (0.079) 4.00 (0.157) 3.70 (0.145) 1.70 (0.068)
W6.50 (0.256) 2.00 (0.079) 2.50 (0.098) 2.80 (0.110) 1.60 (0.063)
Y8.00 (0.315) 2.00 (0.079) 4.00 (0.157) 3.00 (0.119) 1.70 (0.068)
X8.00 (0.315) 2.00 (0.079) 4.00 (0.157) 3.00 (0.119) 1.70 (0.068)
P2.70 (0.100) 0.95 (0.037) 0.80 (0.030) 1.60 (0.060) 0.80 (0.030)
K2.20 (0.087) 0.90 (0.035) 0.40 (0.016) 0.70 (0.028) –
L2.80 (0.110) 1.10 (0.043) 0.60 (0.024) 1.00 (0.039) –
R/H/U
3.20 (0.126) 1.30 (0.051) 0.60 (0.024) 1.50 (0.059) –
X4.20 (0.165) 1.60 (0.063) 1.00 (0.039) 1.60 (0.063) –
A4.40 (0.173) 1.60 (0.063) 1.20 (0.047) 1.80 (0.071) –
T4.70 (0.185) 1.70 (0.070) 1.30 (0.051) 3.00 (0.118) –
TAJ
TPS
TRJ
THJ
TPM
&
CWR11
TAC
TPC
TMC
115
Product Safety Information Datasheet
Material Data and Handling
This should be read in conjunction with the Product Datasheet.
Failure to observe the ratings and the information on this
sheet may result in a safety hazard.
1. Material Content
Solid Tantalum and OxiCap™ capacitors do not contain
liquid hazardous materials.
The operating section contains:
Tantalum/Niobium Graphite/carbon
Tantalum/Niobium oxide Conducting paint/resins
Manganese dioxide Fluoropolymers (not TAC)
The encapsulation contains:
TAA- solder, metal case, solder coated terminal wires, glass
seal and plastic sleeve
TAC - epoxy molding compound, solder/tin coated terminal
pads
TAJ, TPS, THJ, NOJ, NOS, NOM - epoxy molding compound,
tin/solder coated terminal pads
TAP- solder, solder coated terminal wires, epoxy dipped resin
The epoxy resins may contain Antimony trioxide and Bromine
compounds as fire retardants. The capacitors do not contain
PBB or PBBO/PBBE. The solder alloys may contain lead.
2. Physical Form
These capacitors are physically small and are either rectan-
gular with solderable terminal pads, or cylindrical or bead
shaped with solderable terminal wires.
3. Intrinsic Properties
Operating
Both Tantalum and OxiCap™ capacitors are polarized
devices and operate satisfactorily in the correct d.c. mode.
They will withstand a limited application of reverse voltage as
stated in the datasheets. However, a reverse application of
the rated voltage will result in early short circuit failure and
may result in fire or explosion. Consequential failure of other
associated components in the circuit e.g. diodes, transformers,
etc. may also occur. When operated in the correct polarity,
a long period of satisfactory operation will be obtained but
failure may occur for any of the following reasons:
• normal failure rate • temperature too high
• surge voltage exceeded • ripple rating exceeded
• reverse voltage exceeded
If this failure mode is a short circuit, the previous conditions
apply. If the adjacent circuit impedance is low, voltage or
current surges may exceed the power handling capability of
the capacitor. For this reason capacitors in circuits of below
1Ω/V should be derated by minimum 50% for tantalum and
20% for OxiCap™. Precautions should be taken to prevent
reverse voltage spikes. Where capacitors may be subjected
to fast switched, low impedance source voltages, the manu-
facturers advice should be sought to determine the most
suitable capacitors for such applications.
Non-operating
Both Tantalum and OxiCap™ capacitors contain no liquids
or noxious gases to leak out. However, cracking or damage
to the encapsulation may lead to premature failure due to
ingress of material such as cleaning fluids or to stresses
transmitted to the tantalum anode.
4. Fire Characteristics
Primary
Any component subject to abnormal power dissipation may
• self ignite
• become red hot
• break open or explode emitting flaming or red
hot material, solid, molten or gaseous.
Fumes from burning components will vary in composition
depending on the temperature, and should be considered to
be hazardous, although fumes from a single component in a
well ventilated area are unlikely to cause problems.
Secondary
Induced ignition may occur from an adjacent burning or red
hot component. Epoxy resins used in the manufacture of
capacitors give off noxious fumes when burning as stated
above. Wherever possible, capacitors comply with the
following: BS EN 60065
UL 492.60A/280
LOI (ASTM D2863-70) as stated in the datasheets.
5. Storage
Tantalum and OxiCap™ capacitors exhibit a very low random
failure rate after long periods of storage and apart from this
there are no known modes of failure under normal storage
conditions. All capacitors will withstand any environmental
conditions within their ratings for the periods given in the detail
specifications. Storage for longer periods under high humidity
conditions may affect the leakage current of resin protected
capacitors. Solderability of solder coated surfaces may be
affected by storage of excess of 2 years. Recommended
storage conditions: Temperature: 15ºC-35ºC
Humidity: 45-75% RH
6. Disposal
Incineration of epoxy coated capacitors will cause emission
of noxious fumes and metal cased capacitors may explode
due to build up of internal gas pressure. Disposal by any
other means normally involves no special hazards. Large
quantities may have salvage value.
7. Unsafe Use
Most failures are of a passive nature and do not represent a
safety hazard. A hazard may, however, arise if this failure
causes a dangerous malfunction of the equipment in which
the capacitor is employed. Circuits should be designed to fail
safe under the normal modes of failure. The usual failure
mode is an increase in leakage current or short circuit. Other
possible modes are decrease of capacitance, increase in
dissipation factor (and impedance) or an open-circuit.
Operations outside the ratings quoted in the datasheets
represents unsafe use.
8. Handling
Careless handling of the cut terminal leads could result in
scratches and/or skin punctures. Hands should be washed
after handling solder coated terminals before eating or smoking,
to avoid ingestion of lead. Capacitors must be kept out of the
reach of small children. Care must be taken to discharge
capacitors before handling as capacitors may retain a residual
charge even after equipment in which they are being used has
been switched off. Sparks from the discharge could ignite a
flammable vapor.
116
Product Safety Information Datasheet
Environmental Information
AVX has always sought to minimize the environmental impact
of its manufacturing operations and of its capacitors supplied
to customers throughout the world. We have a policy of
preventing and minimizing waste streams during manufac-
ture, and recycling materials wherever possible. We actively
avoid or minimize environmentally hazardous materials in our
production processes.
1. Material Content
For customers wishing to assess the environmental impact
of AVX’s capacitors contained in waste electrical and elec-
tronic equipment, the following information is provided:
Surface mount tantalum capacitors contain:
Tantalum/Niobium and Tantalum/Niobium oxide
Manganese dioxide
Carbon/graphite
Silver
Nickel-iron alloy or Copper alloy depending on design
(consult factory for details)
Tin/Tin-lead alloy plating
Polymers including fluorinated polymers
Epoxide resin encapsulant
The encapsulant is made fire retardant to UL 94 V-0 by the
inclusion of inert mineral filler, antimony trioxide and an
organic bromine compound.
2. AVX capacitors do not contain any
Polybrominated Biphenyl (PBB) or
PBBE/PBBO, Mercury (Hg), Cadmium (Cd) or
Hexavalent Chromium (Cr6+).
The approximate content of some materials is given in the
table below for TAJ, TPS, THJ, TRJ, TPM, TCJ, TLJ, NOJ,
NOS, and NOM series:
NOJ, NOS, NOM series does not contain lead, antimony trioxide or organic
bromine compound.
TAC series does not contain lead, antimony trioxide or organic
bromine compound.
The specific weight of other materials contained in the various
case sizes is available on written request. The component
packing tape is either recyclable Polycarbonate or PVC
(depending on case size), and the sealing tape is a laminate
of halogen-free polymers. The reels are recyclable polystyrene,
and marked with the recycling symbol. The reels are over-
packed in recyclable fiber board boxes. None of the packing
contains heavy metals.
3. Lead
Parts supplied today are electroplated over the terminal
contact area with 100% Tin (Sn). Older products may con-
tain lead comprising much less than 0.2% of the component
weight.
4. Fire Retardants
Currently the only known way of supplying a fire retardant
encapsulant which meets all our performance requirements,
is to incorporate antimony trioxide and an organic bromine
compound. These materials are commonly used in many
plastic items in the home and industry. We expect to be able
to offer an alternative fire retardant encapsulant, free of these
materials, by 2005. A combustible encapsulant free of these
materials could be supplied today, but AVX believes that the
health and safety benefits of using these materials to provide
fire retardancy during the life of the product, far outweigh the
possible risks to the environment and human health.
5. Nickel alloy
It is intended that all case sizes will be made with a high
copper alloy termination. Some case sizes are supplied now
with this termination, and other sizes may be available.
Please contact AVX if you prefer this.
6. Recycling
Surface mount Tantalum and OxiCap™capacitors have a
very long service life with no known wear-out mechanism,
and a low failure rate. However, parts contained in equip-
ment which is of no further use will have some residual value
mainly because of the Tantalum metal or niobium oxide con-
tained. This can be recovered and recycled by specialist
companies. The silver and nickel or copper alloy will also
have some value. Please contact AVX if you require assis-
tance with the disposal of parts. Packaging can by recycled
as described above.
7. Disposal
Surface mount Tantalum and OxiCap™capacitors do not
contain any liquids and no part of the devices is normally
soluble in water at neutral pH values. Incineration will cause
the emission of noxious fumes and is not recommended
except by specialists. Landfill may be considered for
disposal, bearing in mind the small lead content.
Under certain extreme physical conditions it is possible to
generate ignition of Tantalum, Niobium and Niobium oxide
capacitors. These physical conditions relate to high-speed
impact and although not considered to be a normal operat-
ing occurrence may occur as a method of material(s) recov-
ery. Therefore appropriate safeguards procedures and
methodologies need to be adopted to eliminate any risks of
material ignition.
Tantalum Niobium Oxide
Organic
Case Typical Antimony Bromine Case Typical
Size Weight Trioxide Compound Size Weight
(mg) (%) (%) (mg)
A31 1.2 0.9 A 26
B72 1.0 0.7 B 56
C194 0.9 0.7 C 154
D373 0.8 0.6 D 279
E531 1.0 0.7 E 399
V681 1.1 0.8 V 510
P15 1.1 0.8 P 12
R10 1.0 0.7 R 9
S19 1.3 1.0 S 17
T35 1.1 0.9 T 32
W97 1.1 0.8 W 82
X158 1.1 0.8 X 127
Y237 1.2 0.9 Y 182
117
Product Safety Information Datasheet
Environmental Information
For further information, please contact your local AVX sales
office or representative.
8. RoHS Compliance
AVX can declare that we do not add any materials from the
list below to series TAJ, TPS, THJ, TRJ, TPM, NOJ, NOS,
and NOM during production, so they are not contained in
any significant level.
Taping
Substances Code RoHS Compliance
Cadmium and
cadmium compounds All YES
Lead and lead A,B,Y,P YES
Heavy
compounds R,S YES, since production
date 1/1/04
Metals K,H NO
Mercury and mercury All YES
compounds
Hexavalent chromium All YES
compounds
Polychlorinated All YES
biphenyls (PCB)
Chlorinated Polychlorinated All YES
organic naphthalenes (PCN)
compounds Chlorinated paraffins All YES
(CP)
Mirex (Perchlordecone) All YES
Brominated Polybrominated All YES
organic biphenyls (PBB)
compounds Polybrominated All YES
diphenylethers (PBDE)
Organic tin compounds All YES
Asbestos All YES
Azo compounds All YES
Formaldehyde All YES
Polyvinyl chloride (PVC) and
PVC blends All YES
Terpentyne All YES
118
Case A0±0.10 B0±0.10 K±0.10 W±0.30 E±0.10 F±0.05 G min. P±0.10 P2±0.05 P0±0.10 D0+0.20 D1+0.20
-0.00 -0.00
A1.83 3.57 1.87 8.00 1.75 3.50 0.75 4.00 2.00 4.00 1.50 1.00
B3.15 3.77 2.22 8.00 1.75 3.50 0.75 4.00 2.00 4.00 1.50 1.00
C3.45 6.40 2.92 12.0 1.75 5.50 0.75 8.00 2.00 4.00 1.50 1.50
D4.48 7.62 3.22 12.0 1.75 5.50 0.75 8.00 2.00 4.00 1.50 1.50
E4.50 7.50 4.50 12.0 1.75 5.50 0.75 8.00 2.00 4.00 1.50 1.50
V6.43 7.44 3.84 12.0 1.75 5.50 0.75 8.00 2.00 4.00 1.50 1.50
W3.57 6.40 1.65 12.0 1.75 5.50 0.75 8.00 2.00 4.00 1.50 1.50
X4.67 7.62 1.65 12.0 1.75 5.50 0.75 8.00 2.00 4.00 1.50 1.50
Y4.67 7.62 2.15 12.0 1.75 5.50 0.75 8.00 2.00 4.00 1.50 1.50
R1.65 2.45 1.30 8.00 1.75 3.50 0.75 4.00 2.00 4.00 1.50 1.00
P1.65 2.45 1.60 8.00 1.75 3.50 0.75 4.00 2.00 4.00 1.50 1.00
S1.95 3.55 1.30 8.00 1.75 3.50 0.75 4.00 2.00 4.00 1.50 1.00
T3.20 3.80 1.30 8.00 1.75 3.50 0.75 4.00 2.00 4.00 1.50 1.00
TAJ, TPS, TRJ, THJ, TPM, TAC, TPC,
TLJ, TCJ and TMC Series – Tape and Reel Packaging
180mm (7") reel &
Case Size Tape width P 100mm (4") reel 180mm (7") reel 330mm (13") reel Gold Termination
mm mm Suffix Qty. Suffix Qty. Suffix Qty. Suffix Qty.
A84R2000 S 8000 A 2000
B84R2000 S 8000 A 2000
C128 R 500 S 3000 A 500
D128 R 500 S 2500 A 500
E128 R 400 S 1500 A 400
V128 R 400 S 1500 A 400
R84R2500 S 10000 A 2500
P84R2500 S 10000 A 2500
S84R2500 S 10000 A 2500
T84R2500 S 10000 A 2500
W128 R 1000 S 5000 A 1000
Y128 R 1000 S 4000 A 1000
X128 R 1000 S 5000 A 1000
TAPE SPECIFICATION
Tape and reel packaging for automatic component placement.
Please enter required Suffix on order. Bulk packaging is not
available.
Tape dimensions comply to EIA 481-1 Dimensions A0and B0
of the pocket and the tape thickness, K, are dependent on
the component size. Tape materials do not affect component
solderability during storage. Carrier Tape Thickness <0.4mm.
TAPING SUFFIX TABLE TAJ, TPS, TRJ, THJ, TPM, TLJ and TCJ
100mm (4") reel 180mm (7") reel 100mm (4") reel & 180mm (7") reel & 100%
Case Size Tape width P Tin Termination Tin Termination Gold Termination Gold Termination
mm mm Suffix Qty. Suffix Qty. Suffix Qty. Suffix Qty.
K82QTA 1000 PTA 10,000
L84XTA500 RTA 3,500 FTA 500 ATA 3,500
R84XTA500 RTA 2,500 FTA 500 ATA 2,500
H84XTA500 RTA 3,500 FTA 500 ATA 3,500
U84XTA500 RTA 3,500 FTA 500 ATA 3,500
X84XTA500 RTA 2,000 FTA 500 ATA 2,000
A84XTA500 RTA 2,000 FTA 500 ATA 2,000
T84XTA500 RTA 2,500 – – – –
TAPING SUFFIX TABLE TAC and TPC
PLASTIC TAPE DIMENSIONS TAJ, TPS, TRJ, THJ, TPM, TLJ and TCJ
Plastic Case A0+0.025 B0±0.05 W±0.30 E±0.10 F±0.05 P±0.10 P2±0.05 P0±0.10 D+0.10 D1+0.10 K±0.05
-0.00 -0.00
L1.025 1.95 8 1.75 3.5 4 2 4 1.5 0.8 1.1
Plastic Case A0+0.05 B0±0.10 W±0.30 E±0.10 F±0.05 P±0.10 P2±0.05 P0±0.10 D+0.10 D1 Min. K±0.05
-0.00
R1.7 2.45 8 1.75 3.5 4 2 4 1.5 1.0 1.7
H1.7 2.45 8 1.75 3.5 4 2 4 1.5 1.0 1.1
U1.7 2.45 8 1.75 3.5 4 2 4 1.5 1.0 0.8
Plastic Case A0+0.10 B0±0.10 W±0.30 E±0.10 F±0.05 P±0.10 P2±0.05 P0±0.10 D+0.20 D1 Min. K±0.10
-0.00
A/X 1.83 3.57 8 1.75 3.5 4 2 4 1.5 1.0 1.87
T3.20 3.80 8 1.75 3.5 4 4 2 4 1.50 1.0
PLASTIC TAPE DIMENSIONS TAC, TPC and TMC
119
Reel Size Tape A B C W t
180mm (7") 12mm 178±2.00 50 min 13.0±0.50 12.4+1.5/-0 1.50±0.50
180mm (7") 8mm 178±2.00 50 min 13.0±0.50 8.4+1.5/-0 1.50±0.50
330mm (13") 12mm 328±2.00 50 min 13.0±0.50 12.4+1.5/-0 1.50±0.50
330mm (13") 8mm 328±2.00 50 min 13.0±0.50 8.4+1.5/-0 1.50±0.50
108mm (4.25") 8mm 108±2.00 13.0±0.50 8.4+1.5/-0 1.50±0.50
TAJ, TPS, TRJ, THJ, TPM, TAC, TPC,
TLJ, TCJ and TMC Series – Tape and Reel Packaging
anode
A0 K
W
P0
P2
P
G
F
B0
D
E
D1
C
t
B
W
A
REEL DIMENSIONS
COVER TAPE NOMINAL DIMENSIONS
Thickness: 75µm
Width of tape: 5.5mm (8mm tape)
9.5mm (12mm tape)
For TAC Range Only (Paper Tape)
P0
B0
P1
P2
D0
T
TOP
COVER
TAPE
BOTTOM
COVER
TAPE
CENTER LINES
OF CAVITY
CAVITY SIZE
SEE NOTE 1
10 PITCHES CUMULATIVE
TOLERANCE ON TAPE
±0.20mm (±0.008)
E1
F
G
User Direction of Feed
E2
W
T1
T1A0
A0B0WE FP1P2P0D0E2T
+0.1 +0.05 ±.20 ±0.10 ±0.05 ±0.05 ±0.05 ±0.1 -0.1 Min ±0.05
-0.05 -0.05 -0.0
K0.75 1.35 8.0 1.75 3.5 2.0 2.0 4.0 1.5 6.25 0.75
120
TAZ, CWR09, CWR11 and
CWR19 Series
Tape and Reel Packaging
Solid Tantalum Chip TAZ Tape and reel packaging for automatic component placement.
Please enter required Suffix on order. Bulk packaging is standard.
TAZ TAPING SUFFIX TABLE
Case Size Tape width P 7" (180mm) reel 13" reel (330mm) reel
reference mm mm Suffix Qty. Suffix Qty.
A84R2500 S 9000
B124R2500 S 9000
D124R2500 S 8000
E124R2500 S 8000
F128R1000 S 3000
G128R500 S 2500
H128R500 S 2500
Code 8mm Tape 12mm Tape
4±0.1 (0.157±0.004) 4±0.1 (0.157±0.004)
P* or or
8±0.1 (0.315±0.004) 8±0.1 (0.315±0.004)
G0.75 min (0.03 min)0.75 min (0.03 min)
F3.5±0.05 (0.138±0.002)5.5±0.05 (0.22±0.002)
E1.75±0.1 (0.069±0.004)1.75±0.1 (0.069±0.004)
W8±0.3 (0.315±0.012)12±0.3 (0.472±0.012)
P22±0.05 (0.079±0.002)2±0.05 (0.079±0.002)
P04±0.1 (0.157±0.004)4±0.1 (0.157±0.004)
D1.5±0.1 (0.059±0.004)1.5±0.1 (0.059±0.004)
-0 (-0) -0 (-0)
D11.0 min (0.039 min)1.5 min (0.059 min)
*See taping suffix tables for actual P dimension (component pitch).
TAPE SPECIFICATION
Tape dimensions comply to EIA RS 481 A
Dimensions A0and B0of the pocket and
the tape thickness, K, are dependent on
the component size.
Tape materials do not affect component
solderability during storage.
Carrier Tape Thickness <0.4mm
Total Tape Thickness — K max
TAZ
Case size Millimeters (Inches)
reference DIM
A2.0 (0.079)
B4.0 (0.157)
D4.0 (0.157)
E4.0 (0.157)
F4.0 (0.157)
G4.0 (0.157)
H4.0 (0.157)
121
TAJ, TRJ, THJ, TPS, TPM, NOJ, NOS,
NOM, TAC, TPC, TMC, TCJ and TLJ
Marking
For TAJ, TPS & THJ, the positive end of body has videcon
readable polarity marking as shown in the diagram. Bodies
are marked by indelible laser marking on top surface with
capacitance value, voltage, date of manufacture and batch
ID number. R and P case is an exception due to small size in
which only the voltage and capacitance values are printed.
Voltage Rated Voltage Voltage Rated Voltage
Code at 85°C Code at 85°C
F2.5 D 20
G4 E 25
J6.3 V 35
A10 T 50
C16
TAJ, TRJ, TPS, TPM & TCJ – A, B, C, D,
E, S, T, V, W, Y and X CASE:
T 15 BB
227 A
AVX LOGO Capacitance Value in pF
227 = 220µF
Rated Voltage Code
A = 10V
2 Digit Batch
ID Number
Week Number
Polarity
Code
(Anode+)
Year Code
T = 2005
TAJ – R and P CASE:
J
1 0 6
Capacitance Value in pF
106 = 10µF
Rated Voltage Code
J = 6.3V
Polarity
Code
(Anode+)
THJ – A, B, C, D and E CASE:
TAC, TPC, TMC – ALL CASE SIZES
T 15 BB
227 A
AVX LOGO Capacitance Value in pF
227 = 220µF
Rated Voltage Code
A = 10V
2 Digit Batch
ID Number
Week Number
Polarity
Code
(Anode+)
Year Code
T = 2005
Polarity
Band
(Anode+)
TCJ – A, B CASE:
T 15 BB
156 J
AVX LOGO
Polymer Capacitance Value in pF
156 = 15µF
Rated Voltage
J = 6.3V
2 Digit Batch
ID Number
Week Number
Polarity
Band
Year Code
T = 2005
TLJ – A, B, T, W CASE:
T 15 BB
107 J AVX LOGO
Capacitance Value in pF
107 = 100µF Rated Voltage
J = 6.3V
2 Digit Batch
ID Number
Week Number
Polarity
Band
Year Code
T = 2005
Year Year Code Year Year Code
2000 M 2004 S
2001 N 2005 T
2002 P 2006 U
2003 R 2007 Y
NOJ, NOS, NOM –
A, B, C, D, E and V CASE:
T 15 BB
227 G
OxiCap™ LOGO Capacitance Value in pF
227 = 220µF
Rated Voltage
G = 4V
2 Digit Batch
ID Number
Week Number
Polarity
Band
(Anode+)
Year Code
T = 2005
122
SECTION 1:
ELECTRICAL CHARACTERISTICS AND EXPLANATION OF TERMS
1.1 CAPACITANCE
1.1.1 Rated capacitance (CR)
This is the nominal rated capacitance. For tantalum capaci-
tors it is measured as the capacitance of the equivalent
series circuit at 20°C in a measuring bridge supplied by a
120 Hz source free of harmonics with 2.2V DC bias max.
1.1.2 Temperature dependence on the capacitance
The capacitance of a tantalum capacitor varies with temper-
ature. This variation itself is dependent to a small extent on
the rated voltage and capacitor size. See graph below for
typical capacitance changes with temperature.
1.1.3 Capacitance tolerance
This is the permissible variation of the actual value of the
capacitance from the rated value.
1.1.4 Frequency dependence of the capacitance
The effective capacitance decreases as frequency increases.
Beyond 100 kHz the capacitance continues to drop until res-
onance is reached (typically between 0.5-5 MHz depending
on the rating). Beyond this the device becomes inductive.
Typical Capacitance vs. Temperature
% Capacitance
15
10
5
0
-5
-10
-15
Temperature (°C)
-55 -25 0 25 50 75 100 125
1.0F 35V
CAP (F)
1.4
1.2
1.0
0.8
0.6
0.4
100Hz 1kHz 10kHz 100kH
z
Frequency
1.2 VOLTAGE
1.2.1 Rated DC voltage (VR)
This is the rated DC voltage for continuous operation up to
+85°C.
1.2.2 Category voltage (VC)
This is the maximum voltage that may be applied continu-
ously to a capacitor. It is equal to the rated voltage up to
+85°C, beyond which it is subject to a linear derating, to 2/3
VRat 125°C.
1.2.3 Surge voltage (VS)
This is the highest voltage that may be applied to a capaci-
tor for short periods of time. The surge voltage may be
applied up to 10 times in an hour for periods of up to
30 seconds at a time. The surge voltage must not be used
as a parameter in the design of circuits in which, in the
normal course of operation, the capacitor is periodically
charged and discharged.
100
90
80
70
60
50
Percent of 85°C RVDC1 (VR)
75 85 95 105 115 125
Temperature °C
TAP Technical Summary and
Application Guidelines
Typical Curve Capacitance vs. Frequency
Category Voltage vs. Temperature
123
1.2.4 Effect of surges
The solid Tantalum capacitor has a limited ability to withstand
surges (15% to 30% of rated voltage). This is in common
with all other electrolytic capacitors and is due to the fact that
they operate under very high electrical stress within the oxide
layer. In the case of ‘solid’ electrolytic capacitors this is further
complicated by the limited self healing ability of the manganese
dioxide semiconductor.
It is important to ensure that the voltage across the terminals of
the capacitor does not exceed the surge voltage rating at any
time. This is particularly so in low impedance circuits where the
capacitor is likely to be subjected to the full impact of surges,
especially in low inductance applications. Even an extremely
short duration spike is likely to cause damage. In such situa-
tions it will be necessary to use a higher voltage rating.
1.2.5 Reverse voltage and non-polar operation
The reverse voltage ratings are designed to cover exceptional
conditions of small level excursions into incorrect polarity.
The values quoted are not intended to cover continuous
reverse operation.
The peak reverse voltage applied to the capacitor must not
exceed:
10% of rated DC working voltage to a maximum of
1V at 25°C
3% of rated DC working voltage to a maximum of
0.5V at 85°C
1% of category DC working voltage to a maximum of
0.1V at 125°C
1.2.6 Non-polar operation
If the higher reverse voltages are essential, then two capacitors,
each of twice the required capacitance and of equal
tolerance and rated voltage, should be connected in a
back-to-back configuration, i.e., both anodes or both
cathodes joined together. This is necessary in order to avoid
a reduction in life expectancy.
1.2.7 Superimposed AC voltage (Vrms) - Ripple Voltage
This is the maximum RMS alternating voltage, superimposed
on a DC voltage, that may be applied to a capacitor. The
sum of the DC voltage and the surge value of the
superimposed AC voltage must not exceed the category
voltage, Vc. Full details are given in Section 2.
1.2.8 Voltage derating
Refer to section 3.2 (pages 128-129) for the effect of voltage
derating on reliability.
85°C 125°C
Rated Surge Category Surge
Voltage Voltage Voltage Voltage
(V DC) (V DC) (V DC) (V DC)
22.6 1.3 1.7
3422.6
45.2 2.6 3.4
6.3 8 4 5
10 13 6.3 9
16 20 10 12
20 26 13 16
25 33 16 21
35 46 23 28
50 65 33 40
1.3 DISSIPATION FACTOR AND TANGENT OF LOSS ANGLE (TAN )
1.3.1 Dissipation factor (DF)
Dissipation factor is the measurement of the tangent of the
loss angle (Tan ) expressed as a percentage.
The measurement of DF is carried out at +25°C and 120 Hz
with 2.2V DC bias max. with an AC voltage free of harmonics.
The value of DF is temperature and frequency dependent.
1.3.2 Tangent of loss angle (Tan )
This is a measure of the energy loss in the capacitor. It is
expressed as Tan and is the power loss of the capacitor
divided by its reactive power at a sinusoidal voltage of specified
frequency. (Terms also used are power factor, loss factor and
dielectric loss, Cos (90 - ) is the true power factor.) The meas-
urement of Tan is carried out at +20°C and 120 Hz with 2.2V
DC bias max. with an AC voltage free of harmonics.
1.3.3 Frequency dependence of dissipation factor
Dissipation Factor increases with frequency as shown in the
typical curves below.
10F 10V
3.3F 25V
1.0F 35V
100
50
20
10
5
2
1
100Hz 1kHz 10kHz 100kHz
Frequency
DF%
Typical Curve-Dissipation Factor vs. Frequency
TAP Technical Summary and
Application Guidelines
124
1.3.4 Temperature dependence of dissipation factor
Dissipation factor varies with temperature as the typical
curves show to the right. For maximum limits please refer to
ratings tables.
Typical Curves-Dissipation Factor vs. Temperature
100F/6V
1F/35V
DF %
10
5
0
-55 -40 -20 0 20 40 60 80 100 125
Temperature °C
1.4 IMPEDANCE, (Z) AND EQUIVALENT SERIES RESISTANCE (ESR)
1.4.1 Impedance, Z
This is the ratio of voltage to current at a specified frequency.
Three factors contribute to the impedance of a tantalum
capacitor; the resistance of the semiconducting layer,
the capacitance, and the inductance of the electrodes and
leads.
At high frequencies the inductance of the leads becomes a
limiting factor. The temperature and frequency behavior of
these three factors of impedance determine the behavior of
the impedance Z. The impedance is measured at 25°C and
100 kHz.
1.4.2 Equivalent series resistance, ESR
Resistance losses occur in all practical forms of capacitors.
These are made up from several different mechanisms,
including resistance in components and contacts, viscous
forces within the dielectric, and defects producing bypass
current paths. To express the effect of these losses they are
considered as the ESR of the capacitor. The ESR is frequency
dependent. The ESR can be found by using the relationship:
ESR = Tan
2πfC
where f is the frequency in Hz, and C is the capacitance in
farads. The ESR is measured at 25°C and 100 kHz.
ESR is one of the contributing factors to impedance, and at
high frequencies (100 kHz and above) is the dominant factor,
so that ESR and impedance become almost identical,
impedance being marginally higher.
1.4.3 Frequency dependence of impedance and ESR
ESR and impedance both increase with decreasing frequency.
At lower frequencies the values diverge as the extra contri-
butions to impedance (resistance of the semiconducting
layer, etc.) become more significant. Beyond 1 MHz (and
beyond the resonant point of the capacitor) impedance again
increases due to induction.
ESR ()
1k
100
10
1
0.1
0.01
0.1 µF
0.33 µF
1 µF
10 µF
33 µF
100 µF
330 µF
100 1k 10k 100k 1M
Frequency f (Hz)
Impedance (Z)
ESR
Frequency Dependence of Impedance and ESR
TAP Technical Summary and
Application Guidelines
125
TAP Technical Summary and
Application Guidelines
1.4.4 Temperature dependence of the impedance and ESR
At 100 kHz, impedance and ESR behave identically and
decrease with increasing temperature as the typical curves
show. For maximum limits at high and low temperatures,
please refer to graph opposite.
1.5 DC LEAKAGE CURRENT (DCL)
1.5.1 Leakage current (DCL)
The leakage current is dependent on the voltage applied, the
time, and the capacitor temperature. It is measured
at +25°C with the rated voltage applied. A protective resist-
ance of 1000is connected in series with the capacitor
in the measuring circuit.
Three minutes after application of the rated voltage the leak-
age current must not exceed the maximum values indicated
in the ratings table. Reforming is unnecessary even after pro-
longed periods without the application of voltage.
1.5.2 Temperature dependence of the leakage current
The leakage current increases with higher temperatures, typical
values are shown in the graph.
For operation between 85°C and 125°C, the maximum
working voltage must be derated and can be found from the
following formula.
V max = 1- (T-85)x VR volts
120
where T is the required operating temperature. Maximum
limits are given in rating tables.
1.5.3 Voltage dependence of the leakage current
The leakage current drops rapidly below the value corre-
sponding to the rated voltage VRwhen reduced voltages are
applied. The effect of voltage derating on the leakage
current is shown in the graph.
This will also give a significant increase in reliability for any
application. See Section 3 (pages 127-129) for details.
1.5.4 Ripple current
The maximum ripple current allowance can be calculated from
the power dissipation limits for a given temperature rise above
ambient. Please refer to Section 2 (page 126) for details.
10
1
0.1
Leakage Current DCLT/DCL 25°C
-55 -40 -20 0 20 40 60 80 100 125
Temperature °C
Temperature Dependence of the
Leakage Current for a Typical Component
Effect of Voltage Derating on Leakage Current
TYPICAL RANGE
1
0.1
0.01
Leakage Current Ratio DCL/DCL @ VR
020
40 60 80 100
% of Rated Voltage (VR)
1/35
10/35
47/35
100
10
1
0.1
ESR/Impedance Z ()
-55 -40 -20 0+20 +40 +60 +80 +100 +125
Tem
p
erature T
(
°C
)
Temperature Dependence of the
Impedance and ESR
126
In an AC application heat is generated within the capacitor
by both the AC component of the signal (which will depend
upon signal form, amplitude and frequency), and by the
DC leakage. For practical purposes the second factor is
insignificant. The actual power dissipated in the capacitor is
calculated using the formula:
P = I
2
R = E
2
R
Z
2
I = rms ripple current, amperes
R = equivalent series resistance, ohms
E = rms ripple voltage, volts
P = power dissipated, watts
Z = impedance, ohms, at frequency under
consideration
Using this formula it is possible to calculate the maximum
AC ripple current and voltage permissible for a particular
application.
2.2 MAXIMUM AC RIPPLE VOLTAGE
(Emax)
From the previous equation:
E(max) = ZP max
R
where Pmax is the maximum permissible ripple voltage as listed
for the product under consideration (see table).
However, care must be taken to ensure that:
1. The DC working voltage of the capacitor must not be
exceeded by the sum of the positive peak of the applied
AC voltage and the DC bias voltage.
2. The sum of the applied DC bias voltage and the negative
peak of the AC voltage must not allow a voltage reversal
in excess of that defined in the sector, ‘Reverse Voltage’.
2.3 MAXIMUM PERMISSIBLE POWER
DISSIPATION (WATTS) @ 25°C
The maximum power dissipation at 25°C has been calculated
for the various series and are shown in Section 2.4, together
with temperature derating factors up to 125°C.
For leaded components the values are calculated for parts
supported in air by their leads (free space dissipation).
The ripple ratings are set by defining the maximum tempera-
ture rise to be allowed under worst case conditions, i.e.,
with resistive losses at their maximum limit. This differential
is normally 10°C at room temperature dropping to 2°C at
125°C. In application circuit layout, thermal management,
available ventilation, and signal waveform may significantly
affect the values quoted below. It is recommended that
temperature measurements are made on devices during
operating conditions to ensure that the temperature differential
between the device and the ambient temperature is less than
10°C up to 85°C and less than 2°C between 85°C and 125°C.
Derating factors for temperatures above 25°C are also shown
below. The maximum permissible proven dissipation should be
multiplied by the appropriate derating factor.
For certain applications, e.g., power supply filtering, it may
be desirable to obtain a screened level of ESR to enable
higher ripple currents to be handled. Please contact our
applications desk for information.
2.4 POWER DISSIPATION RATINGS
(IN FREE AIR)
TAR – Molded Axial
SECTION 2:
AC OPERATION — RIPPLE VOLTAGE AND RIPPLE CURRENT
2.1 RIPPLE RATINGS (AC)
Case Max. power
size dissipation (W)
Q0.065
R0.075
S0.09
W0.105
Temperature
derating factors
Temp. °C Factor
+25 1.0
+85 0.6
+125 0.4
Case Max. power
size dissipation (W)
A0.09
B0.10
C0.125
D0.18
Temperature
derating factors
Temp. °C Factor
+20 1.0
+85 0.9
+125 0.4
TAA – Hermetically Sealed Axial
Case Max. power
size dissipation (W)
A0.045
B0.05
C0.055
D0.06
E0.065
F0.075
G0.08
H0.085
J0.09
K0.1
L0.11
M/N 0.12
P0.13
R0.14
Temperature
derating factors
Temp. °C Factor
+25 1.0
+85 0.4
+125 0.09
TAP – Resin Dipped Radial
TAP Technical Summary and
Application Guidelines
127
SECTION 3:
RELIABILITY AND CALCULATION OF FAILURE RATE
3.1 STEADY-STATE
Tantalum Dielectric has essentially no wear out mechanism
and in certain circumstances is capable of limited self
healing, random failures can occur in operation. The failure
rate of Tantalum capacitors will decrease with time and not
increase as with other electrolytic capacitors and other
electronic components.
Figure 1. Tantalum reliability curve.
The useful life reliability of the Tantalum capacitor is affected
by three factors. The equation from which the failure rate can
be calculated is:
F = FUx FTx FRx FB
where FUis a correction factor due to operating voltage/
voltage derating
FTis a correction factor due to operating
temperature
FRis a correction factor due to circuit series
resistance
FBis the basic failure rate level. For standard
leaded Tantalum product this is 1%/1000hours
Operating voltage/voltage derating
If a capacitor with a higher voltage rating than the maximum
line voltage is used, then the operating reliability will be
improved. This is known as voltage derating. The graph,
Figure 2, shows the relationship between voltage derating
(the ratio between applied and rated voltage) and the failure
rate. The graph gives the correction factor FUfor any
operating voltage.
Voltage Correction Factor
Figure 2. Correction factor to failure rate F for voltage
derating of a typical component (60% con. level).
Operating temperature
If the operating temperature is below the rated temperature
for the capacitor then the operating reliability will be improved
as shown in Figure 3. This graph gives a correction factor FT
for any temperature of operation.
Temperature Correction Factor
Figure 3. Correction factor to failure rate F for ambient
temperature T for typical component (60% con. level).
20
100.0
10.0
1.0
0.1
0.0 30 40 50 60 70 80 90 100 110 120 130
Temperature (°C)
Correction Factor
Tantalum
1.0000
0.1000
0.0100
0.0010
0.0001
Correction Factor
00.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1
A
pp
lied Volta
g
e / Rated Volta
g
e
Infinite Useful Life
Useful life reliability can be altered by voltage
derating, temperature or series resistance
Infant
Mortalities
TAP Technical Summary and
Application Guidelines
128
Circuit Impedance
All solid tantalum capacitors require current limiting
resistance to protect the dielectric from surges. A series
resistor is recommended for this purpose. A lower circuit
impedance may cause an increase in failure rate, especially
at temperatures higher than 20°C. An inductive low imped-
ance circuit may apply voltage surges to the capacitor and
similarly a non-inductive circuit may apply current surges
to the capacitor, causing localized over-heating and failure.
The recommended impedance is 1Ωper volt. Where this is
not feasible, equivalent voltage derating should be used
(See MIL HANDBOOK 217E). Table I shows the correction
factor, FR, for increasing series resistance.
Table I: Circuit Impedance
Correction factor to failure rate F for series resistance R
on basic failure rate FBfor a typical component (60%
con. level).
Example calculation
Consider a 12 volt power line. The designer needs about
10µF of capacitance to act as a decoupling capacitor near a
video bandwidth amplifier. Thus the circuit impedance will be
limited only by the output impedance of the boards power
unit and the track resistance. Let us assume it to be about
2 Ohms minimum, i.e., 0.167 Ohms/Volt. The operating
temperature range is -25°C to +85°C. If a 10µF 16 Volt
capacitor was designed-in, the operating failure rate would
be as follows:
a) FT= 0.8 @ 85°C
b) FR= 0.7 @ 0.167 Ohms/Volt
c) FU= 0.17 @ applied voltage/rated voltage = 75%
Thus FB= 0.8 x 0.7 x 0.17 x 1 = 0.0952%/1000 Hours
If the capacitor was changed for a 20 volt capacitor, the
operating failure rate will change as shown.
FU= 0.05 @ applied voltage/rated voltage = 60%
FB= 0.8 x 0.7 x 0.05 x 1 = 0.028%/1000 Hours
3.2 DYNAMIC
As stated in Section 1.2.4 (page 123), the solid Tantalum
capacitor has a limited ability to withstand voltage and current
surges. Such current surges can cause a capacitor to fail.
The expected failure rate cannot be calculated by a simple
formula as in the case of steady-state reliability. The two
parameters under the control of the circuit design engineer
known to reduce the incidence of failures are derating and
series resistance.The table below summarizes the results of
trials carried out at AVX with a piece of equipment which has
very low series resistance and applied no derating. So that
the capacitor was tested at its rated voltage.
Results of production scale derating experiment
As can clearly be seen from the results of this experiment,
the more derating applied by the user, the less likely the
probability of a surge failure occurring.
It must be remembered that these results were derived from
a highly accelerated surge test machine, and failure rates in
the low ppm are more likely with the end customer.
Circuit Resistance ohms/volt FR
3.0 0.07
2.0 0.1
1.0 0.2
0.8 0.3
0.6 0.4
0.4 0.6
0.2 0.8
0.1 1.0
Capacitance and Number of units 50% derating No derating
Voltage tested applied applied
47µF 16V 1,547,587 0.03% 1.1%
100µF 10V 632,876 0.01% 0.5%
22µF 25V 2,256,258 0.05% 0.3%
TAP Technical Summary and
Application Guidelines
129
A commonly held misconception is that the leakage current
of a Tantalum capacitor can predict the number of failures
which will be seen on a surge screen. This can be disproved
by the results of an experiment carried out at AVX on 47µF
10V surface mount capacitors with different leakage
currents. The results are summarized in the table below.
Leakage Current vs Number of Surge Failures
Again, it must be remembered that these results were
derived from a highly accelerated surge test machine,
and failure rates in the low ppm are more likely with the end
customer.
AVX recommended derating table
For further details on surge in Tantalum capacitors refer
to J.A. Gill’s paper “Surge in Solid Tantalum Capacitors”,
available from AVX offices worldwide.
An added bonus of increasing the derating applied in a
circuit, to improve the ability of the capacitor to withstand
surge conditions, is that the steady-state reliability is
improved by up to an order. Consider the example of a
6.3 volt capacitor being used on a 5 volt rail. The steady-
state reliability of a Tantalum capacitor is affected by three
parameters; temperature, series resistance and voltage
derating. Assuming 40°C operation and 0.1Ω/volt of series
resistance, the scaling factors for temperature and series
resistance will both be 0.05 [see Section 3.1 (page 127)]. The
derating factor will be 0.15. The capacitors reliability will
therefore be
Failure rate = FUx FTx FRx 1%/1000 hours
= 0.15 x 0.05 x 1 x 1%/1000 hours
= 7.5% x 10-3/hours
If a 10 volt capacitor was used instead, the new scaling factor
would be 0.017, thus the steady-state reliability would be
Failure rate = FUx FTx FRx 1%/1000 hours
= 0.017 x 0.05 x 1 x 1%/1000 hours
= 8.5% x 10-4/ 1000 hours
So there is an order improvement in the capacitors steady-
state reliability.
3.3 RELIABILITY TESTING
AVX performs extensive life testing on tantalum capacitors.
■2,000 hour tests as part of our regular Quality Assurance
Program.
Test conditions:
■85°C/rated voltage/circuit impedance of 3Ωmax.
■125°C/0.67 x rated voltage/circuit impedance of 3Ωmax.
3.4 Mode of Failure
This is normally an increase in leakage current which ultimately
becomes a short circuit.
Number tested Number failed surge
Standard leakage range 10,000 25
0.1 µA to 1µA
Over Catalog limit 10,000 26
5µA to 50µA
Classified Short Circuit 10,000 25
50µA to 500µA
Voltage Rail Working Cap Voltage
3.3 6.3
510
10 20
12 25
15 35
≥24 Series Combinations (11)
TAP Technical Summary and
Application Guidelines
130
SECTION 5:
MECHANICAL AND THERMAL PROPERTIES, LEADED CAPACITORS
5.1 ACCELERATION
10 g (981 m/s)
5.2 VIBRATION SEVERITY
10 to 2000 Hz, 0.75 mm or 98 m/s2
5.3 SHOCK
Trapezoidal Pulse 10 g (981 m/s) for 6 ms
5.4 TENSILE STRENGTH OF
CONNECTION
10 N for type TAR, 5 N for type TAP.
5.5 BENDING STRENGTH OF
CONNECTIONS
2 bends at 90°C with 50% of the tensile strength test loading.
5.6 SOLDERING CONDITIONS
Dip soldering permissible provided solder bath temperature
270°C; solder time <3 sec.; circuit board thickness
1.0 mm.
5.7 INSTALLATION INSTRUCTIONS
The upper temperature limit (maximum capacitor surface
temperature) must not be exceeded even under the most
unfavorable conditions when the capacitor is installed. This
must be considered particularly when it is positioned near
components which radiate heat strongly (e.g., valves and
power transistors). Furthermore, care must be taken, when
bending the wires, that the bending forces do not strain the
capacitor housing.
5.8 INSTALLATION POSITION
No restriction.
5.9 SOLDERING INSTRUCTIONS
Fluxes containing acids must not be used.
SECTION 4:
APPLICATION GUIDELINES FOR TANTALUM CAPACITORS
Dangerous Range
Allowable Range
with Preheat
Allowable Range
with Care
270
260
250
240
230
220
210
200
0 2 4 6 8 10 12
Soldering Time (secs.)
Allowable range of peak temp./time combination for wave soldering
Temperature
(o
C)
*See appropriate product specification
TAP Technical Summary and
Application Guidelines
4.1 SOLDERING CONDITIONS AND
BOARD ATTACHMENT
The soldering temperature and time should be the minimum
for a good connection.
A suitable combination for wavesoldering is 230°C - 250°C
for 3 - 5 seconds.
Small parametric shifts may be noted immediately after wave
solder, components should be allowed to stabilize at room
temperature prior to electrical testing.
AVX leaded tantalum capacitors are designed for wave
soldering operations.
4.2 RECOMMENDED SOLDERING
PROFILES
Recommended wave soldering profile for mounting of
tantalum capacitors is shown below.
After soldering the assembly should preferably be allowed to
cool naturally. In the event that assisted cooling is used, the
rate of change in temperature should not exceed that used
in reflow.
131
Technical Summary and
Application Guidelines
QUESTIONS AND ANSWERS
Some commonly asked questions regarding Tantalum
Capacitors:
Question:
If I use several tantalum capacitors in serial/
parallel combinations, how can I ensure equal current and
voltage sharing?
Answer:
Connecting two or more capacitors in series
and parallel combinations allows almost any value and
rating to be constructed for use in an application.
For example, a capacitance of more than 60µF is required in
a circuit for stable operation. The working voltage rail is 24
Volts dc with a superimposed ripple of 1.5 Volts at 120 Hz.
The maximum voltage seen by the capacitor is Vdc +
Vac=25.5V
Applying the 50% derate rule tells us that a 50V capacitor
is required.
Connecting two 25V rated capacitors in series will
give the required capacitance voltage rating, but the
effective capacitance will be halved, so for greater than
60µF, four such series combinations are required, as
shown.
In order to ensure reliable o
peration, the capacitors should
be connected as shown below to allow current sharing of the
ac noise and ripple signals. This prevents any one capacitor
heating more than its neighbors and thus being the weak link
in the chain.
The two resistors are used to ensure that the leakage
currents of the capacitors does not affect the circuit
reliability, by ensuring that all the capacitors have half the
working voltage across them.
Question:
What are the advantages of tantalum over other
capacitor technologies?
Answer:
1. Tantalums have high volumetric efficiency.
2. Electrical performance over temperature is very stable.
3. They have a wide operating temperature range -55
degrees C to +125 degrees C.
4. They have better frequency characteristics than
aluminum electrolytics.
5. No wear out mechanism. Because of their construction,
solid tantalum capacitors do not degrade in perform-
ance or reliability over time.
Question:
If the part is rated as a 25 volt part and you have
current surged it, why can’t I use it at 25 volts in a low imped-
ance circuit?
Answer:
The high volumetric efficiency obtained using tanta-
lum technology is accomplished by using an extremely thin
film of tantalum pentoxide as the dielectric. Even an applica-
tion of the relatively low voltage of 25 volts will produce a
large field strength as seen by the dielectric. As a result of
this, derating has a significant impact on reliability as
described under the reliability section. The following example
uses a 22 microfarad capacitor rated at 25 volts to illustrate
the point. The equation for determining the amount of sur-
face area for a capacitor is as follows:
C = ( (E) (E°) (A) ) / d
A = ( (C) (d) ) /( (E°)(E) )
A = ( (22 x 10-6) (170 x 10-9) ) / ( (8.85 x 10-12) (27) )
A = 0.015 square meters (150 square centimeters)
Where C = Capacitance in farads
A = Dielectric (Electrode) Surface Area (m2)
d = Dielectric thickness (Space between dielectric) (m)
E = Dielectric constant (27 for tantalum)
E°= Dielectric Constant relative to a vacuum
(8.855 x 10-12 Farads x m-1)
To compute the field voltage potential felt by the dielectric we
use the following logic.
Dielectric formation potential = Formation Ratio x
Working Voltage
= 4 x 25
Formation Potential = 100 volts
Dielectric (Ta2O5) Thickness (d) is 1.7 x 10-9 Meters Per Volt
d = 0.17 µ meters
Electric Field Strength = Working Voltage / d
= (25 / 0.17 µ meters)
= 147 Kilovolts per millimeter
= 147 Megavolts per meter
+
••
••
••
••
••
100K
100K
100K
66µF
50V
➡
33µF
25V
33µF
25V
33µF
25V
16.5µF
50V
➡
132
Technical Summary and
Application Guidelines
QUESTIONS AND ANSWERS
No matter how pure the raw tantalum powder or the preci-
sion of processing, there will always be impurity sites in the
dielectric. We attempt to stress these sites in the factory with
overvoltage surges, and elevated temperature burn in so that
components will fail in the factory and not in your product.
Unfortunately, within this large area of tantalum pentoxide,
impurity sites will exist in all capacitors. To minimize the pos-
sibility of providing enough activation energy for these impu-
rity sites to turn from an amorphous state to a crystalline
state that will conduct energy, series resistance and derating
is recommended. By reducing the electric field within the
anode at these sites, the tantalum capacitor has increased
reliability. Tantalums differ from other electrolytics in that
charge transients are carried by electronic conduction rather
than absorption of ions.
Question:
What negative transients can Solid Tantalum
Capacitors operate under?
Answer:
The reverse voltage ratings are designed to cover
exceptional conditions of small level excursions into incorrect
polarity. The values quoted are not intended to cover contin-
uous reverse operation. The peak reverse voltage applied to
the capacitor must not exceed:
10% of rated DC working voltage to a maximum of
1 volt at 25°C.
3% of rated DC working voltage to a maximum of 0.5
volt at 85°C.
1% of category DC working voltage to a maximum of
0.1 volt at 125°C.
Question:
I have read that manufacturers recommend a
series resistance of 0.1 ohm per working volt. You suggest
we use 1 ohm per volt in a low impedance circuit. Why?
Answer:
We are talking about two very different sets of circuit
conditions for those recommendations. The 0.1 ohm per volt
recommendation is for steady-state conditions. This level of
resistance is used as a basis for the series resistance variable
in a 1% / 1000 hours 60% confidence level reference. This
is what steady-state life tests are based on. The 1 ohm per volt
is recommended for dynamic conditions which include current
in-rush applications such as inputs to power supply circuits. In
many power supply topologies where the di / dt through the
capacitor(s) is limited, (such as most implementations of buck
(current mode), forward converter, and flyback), the require-
ment for series resistance is decreased.
Question:
How long is the shelf life for a tantalum capacitor?
Answer:
Solid tantalum capacitors have no limitation on shelf
life. The dielectric is stable and no reformation is required. The
only factors that affect future performance of the capacitors
would be high humidity conditions and extreme storage
temperatures. Solderability of solder coated surfaces may be
affected by storage in excess of 2 years. Recommended stor-
age conditions are: Temperature between 15ºC and 35ºC
with humidity 45%-75% RH. Terminations should be checked
for solderability in the event an oxidation develops on the sol-
der plating.
Question:
What level of voltage derating is needed for
Tantalum Capacitors?
Answer:
For many years whenever people have asked a
tantalum capacitor manufacturer about what were the safe
guidelines for using their product, they spoke with one voice
“a minimum of 50% voltage derating should be applied”. This
message has since become ingrained and automatic. This
article challenges this statement and explains why it is not
necessarily the case.
The 50% rule came about when tantalum capacitors started
to be used on low impedance sources. In such applications,
the available current is high and therefore a risk of failure is
inherent. Well established by empirical methods and covered
in MIL-STD 317, was the fact that the amount of voltage
derating has a major influence on the failure rate of a tanta-
lum capacitor (Figure 1). Indeed, from rated voltage to 50%
of rated voltage is an improvement in failure rate of more
than 100.
Figure 1
It was also proved that the same was true of dynamic, high
current pulse conditions1, hence the recommendation.
Now let us look more closely at the type of circuits in use.
Below is a simple circuit which will be discussed further in
this text.
Let us assume this is a 2 cell battery system, therefore
Vbat = 3.2 Volts
Also, let us assume
Zbat = 60 mΩ, Zdiode = 70 mΩ, Zcap = 120 mΩ, ZL= 70 mΩ
If the “50% rule” was followed, the designer should chose a
6.3V rated capacitor.
1Surge in solid tantalum capacitors, John Gill, AVX Tantalum
ZL
Zbat
Vbat
Zdiode
Zcap = ESR +
0.0001
0.001
0.01
0.1
1
00.20.40.60.811.2
Application voltage/rated voltage
Correction Factor, Fu
133
Technical Summary and
Application Guidelines
The total circuit impedance of the system is 320 mΩ. So by
Ohm’s law the peak current would be 10 Amps.
This exceeds the test conditions used by AVX to screen its
product for high current pulses1, so a risk of failure exists.
Clearly a minimum of a 10 volt rate capacitor is required in
this application.
As a general rule of thumb, the maximum current a tantalum
capacitor can withstand (provided it has not been damaged
by thermomechanical damage2 3 or some other external
influence) is given by the equation:
Imax = Vrated / (1 + Catalog ESR)
So for example for a 100µF 10V D case capacitor (Catalog
ESR = 0.9 Ohms), this would be:
Imax = 10 / (1 + 0.9) = 5.2 Amps
In some circuits, because of size restrictions, a tantalum
capacitor may be the only option available. If this is the case,
AVX recommends a PFET integrator be used to slow the
voltage ramp at turn on, which in effect reduces the peak
current, and therefore reduces the risk of failure4.
Now, let’s consider a continuation of the circuit with the addi-
tion of an LDO or DC/DC convertor.
The risk of a high surge current being seen by the capacitor
in location C2is very small. Therefore if we assume the volt-
age rail is 2.8 volts and the maximum current seen by C2is
<1.5 Amps, a 4 volt capacitor could be able to be used in
this application.
This all seems like good news, but as always, there are some
downsides to using a part nearer to its rated voltage. The first
is the steady-state life, or MTBF. The MTBF of a tantalum
capacitor is easily calculated from MIL-STD 317 or the
supplier’s catalog data. An example is given below:
Assume operating temperature is 85°C and circuit imped-
ance 0.1 Ohms/volt (FT= 1).
For a 10 volt rated capacitor on a 5 volt rated line, the failure
rate is:
FR= 1%/1000 hours x FTx FUx FR
= 1%/1000 hours x 1 x 0.007 (from Figure 1) x 1
= 0.007%/1000 hours
MTBF =105/ FR
= 14,285,238 hours
= 1,631 years
For a 6.3 volt rated capacitor on a 5 volt rated line, the
failure rate is:
FR= 1%/1000 hours x FTX FUX FR
= 1%/1000 hours x 1 x 0.12 (from Figure 1) x 1
= 0.12 %/1000 hours
MTBF = 105/ FR
= 833,333 hours
= 95 years
The second factor to be considered is that the more derating
applied to a tantalum capacitor, the lower the leakage current
level (Figure 2). Therefore a part used at 50% of its rated volt-
age will have more than 3 times better leakage levels than
one used at 80%.
Leakage Current vs. Rated Voltage
Figure 2
One final point worthy of mention with the introduction of
higher reflow temperatures with the introduction of lead-free
solders is that voltage derating can help to reduce the risk of
failures due to thermomechanical damage during reflow.
To summarize, a tantalum capacitor is capable of being used
at its rated voltage or close to it, provided that the user obeys
the rules outlined in this document and is prepared
for the reduced steady-state life performance and higher
leakage current levels this would produce.
1Surge in Solid Tantalum Capacitors, John Gill, AVX Tantalum
2IR Reflow Guidelines for Tantalum Capacitors, Steve Warden & John Gill,
AVX Tantalum
3Mounting Guidelines in AVX Tantalum Catalog
4Improving Reliability of Tantalum Capacitors in Low Impedance Circuits,
Dave Mattingly, AVX
Typical
Range
1
0.1
0.010204060
Rated Voltage (V
R
) %
Leakage Current Ratio I/IV
R
80 100
ZL
Zbat
Vbat
Zdiode
C2
+
Zcap
+
DC/DC
134
NOTICE: Specifications are subject to change without notice. Contact your nearest AVX Sales Office for the latest specifications. All statements, information and data given
herein are believed to be accurate and reliable, but are presented without guarantee, warranty, or responsibility of any kind, expressed or implied. Statements
or suggestions concerning possible use of our products are made without representation or warranty that any such use is free of patent infringement and are not
recommendations to infringe any patent. The user should not assume that all safety measures are indicated or that other measures may not be required. Specifications are
typical and may not apply to all applications.
© AVX Corporation
“Niobium Oxide Capacitors are manufactured and sold under patent license from Cabot Corporation, Boyertown, Pennsylvania U.S.A.”
AVX Products Listing
For more information please visit
our website at
http://www.avx.com
CONNECTORS
PASSIVES
Capacitors
Multilayer Ceramic
Film
Glass
Niobium Oxide* - OxiCapTM
Pulse Supercapacitors
Tantalum
Circuit Protection
Thermistors
Fuses - Thin Film
Transient Voltage Suppressors
Varistors - Zinc Oxide
Directional Couplers
Thin-Film
Filters
Ceramic
EMI
Noise
SAW
Low Pass - Thin Film
Inductors
Thin-Film
Integrated Passive Components
PMC - Thin-Film Networks
Capacitor Arrays
Feedthru Arrays
Low Inductance Decoupling Arrays
Piezo Acoustic Generators
Ceramic
Resistors
Arrays
Miniature Axials
Timing Devices
Clock Oscillators
MHz Quartz Crystal
Resonators
VCO
TCXO
Automotive
Standard, Custom
Board to Board
SMD (0.4, 0.5, 1.0mm), BGA, Thru-Hole
Card Edge
DIN41612
Standard, Inverse, High Temperature
FFC/FPC
0.3, 0.5, 1.0mm
Hand Held, Cellular
Battery, I/O, SIMcard, RF shield clips
2mm Hard Metric
Standard, Reduced Cross-Talk
IDC Wire to Board
Headers, Plugs, Assemblies
Memory
PCMCIA, Compact Flash, Secure Digital, MMC,
Smartcard, SODIMM
Military
H Government, DIN41612
PolytectTM
Soft Molding
Rack and Panel
VariconTM
Contact:
AVX Myrtle Beach, SC
Corporate Offices
Tel: 843-448-9411
FAX: 843-448-1943
AVX Northwest, WA
Tel: 360-699-8746
FAX: 360-699-8751
AVX North Central, IN
Tel: 317-848-7153
FAX: 317-844-9314
AVX Mid/Pacific, CA
Tel: 510-661-4100
FAX: 510-661-4101
AVX Southwest, AZ
Tel: 602-678-0384
FAX: 602-678-0385
AVX South Central, TX
Tel: 972-669-1223
FAX: 972-669-2090
AVX Southeast, GA
Tel: 404-608-8151
FAX: 770-972-0766
AVX Canada
Tel: 905-238-3151
FAX: 905-238-0319
AVX Limited, England
European Headquarters
Tel: ++44 (0) 1252-770000
FAX: ++44 (0) 1252-770001
AVX/ELCO, England
Tel: ++44 (0) 1638-675000
FAX: ++44 (0) 1638-675002
AVX S.A., France
Tel: ++33 (1) 69-18-46-00
FAX: ++33 (1) 69-28-73-87
AVX GmbH, Germany
Tel: ++49 (0) 8131-9004-0
FAX: ++49 (0) 8131-9004-44
AVX srl, Italy
Tel: ++390 (0)2 614-571
FAX: ++390 (0)2 614-2576
AVX Czech Republic
Tel: ++420 465-358-111
FAX: ++420 465-323-010
A KYOCERA GROUP COMPANY
http://www.avx.com
AVX/Kyocera, Singapore
Asia-Pacific Headquarters
Tel: (65) 6286-7555
FAX: (65) 6488-9880
AVX/Kyocera, Hong Kong
Tel: (852) 2-363-3303
FAX: (852) 2-765-8185
AVX/Kyocera, Korea
Tel: (82) 2-785-6504
FAX: (82) 2-784-5411
AVX/Kyocera, Taiwan
Tel: (886) 2-2698-8778
FAX: (886) 2-2698-8777
AVX/Kyocera, Malaysia
Tel: (60) 4-228-1190
FAX: (60) 4-228-1196
Elco, Japan
Tel: 045-943-2906/7
FAX: 045-943-2910
Kyocera, Japan - AVX
Tel: (81) 75-604-3426
FAX: (81) 75-604-3425
Kyocera, Japan - KDP
Tel: (81) 75-604-3424
FAX: (81) 75-604-3425
AVX/Kyocera, Shanghai, China
Tel: 86-21 6341 0300
FAX: 86-21 6341 0330
AVX/Kyocera, Tianjin, China
Tel: 86-22 2576 0098
FAX: 86-22 2576 0096
USA
EUROPE
ASIA-PACIFIC
S-TLC0M605-C
