Silicon 3 Watt Zener Diode
Microsemi
Scottsdale Division
8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503
Page 1
Copyright 2003
7-21-2003 REV A
WWW.Microsemi .COM
SCOTTSDALE DIVISION
3EZ3.9D5 thru 3EZ200D5
3EZ3.9D5 thru 3EZ200D5
DESCRIPTION APPEARANCE
The 3EZ3.9D5 thru 3EZ200D5 series of axial-leaded 3.0 watt Zeners
provides voltage regulation selections with 5% tolerances from 3.9 to 200
volts in a DO-41 plastic package size. Other Zener voltage tolerances are
also available by changing the suffix number to the tolerance desired such
as 1, 2 3, or 4 for tighter tolerances or 10 for wider tolerance. These plastic
encapsulated Zeners have moisture classification of Level 1 with no dry
pack required and are also available in various military equivalent
screening levels by adding a prefix identifier as also described in the
Features section. They may be operated at high maximum dc currents or
full power rating with adequate heat. Microsemi also offers numerous other
Zener products to meet higher and lower power applications.
IMPORTANT: For the most current data, consult MICROSEMI’s website: http://www.microsemi.com
FEATURES APPLICATIONS / BENEFITS
• Zener voltage available 3.9 V to 200 V
• Standard voltage tolerances are plus/minus 5%
with a 5 suffix and 10 % with 10 suffix
identification
• Tight tolerances available in plus or minus 4%,
3%, 2% or 1% with 4, 3, 2, or 1 suffix respectively
• Options for screening in accordance with MIL-
PRF-19500 for JAN, JANTX, JANTXV, and JANS
are available by adding MQ, MX, MV, or MSP
prefixes respectively to part numbers.
• Surface mount equivalents available as
SMBJ3EZ3.9D5 to SMBJ3EZ200D5 in the DO-
214AA package, or SMBG3EZ3.9D5 to
SMBG3EZ200D5 in the DO-215AA package
• Regulates voltage over a broad operating current and
temperature range
• 3 W capability in relatively small DO-41 package size
when adequately heat sunk (see Figure 1)
• Wide selection from 3.9 to 200 V
• Flexible axial-lead mounting terminals
• Nonsensitive to ESD per MIL-STD-750 Method 1020
• Withstands surge stresses
• High specified maximum current (IZM) when
adequately heat sunk
• Moisture classification is Level 1 per IPC/JEDEC
J-STD-020B with no dry pack required
MAXIMUM RATINGS MECHANICAL AND PACKAGING
• Power dissipation at 25ºC: 3.0 watts (also see
derating in Figure 1).
• Operating and Storage temperature: -65ºC to +150ºC
• Thermal Resistance: 40 ºC/W junction to lead at 3/8
(10 mm) lead length from body, or 100ºC/W junction
to ambient when mounted on FR4 PC board (1oz Cu)
with 4 mm2 copper pads and track width 1 mm, length
25 mm
• Steady-State Power: 3 watts at TL < 30oC 3/8 inch
(10 mm) from body, or 1.25 watts at TA = 25ºC when
mounted on FR4 PC described for thermal resistance
(also see Figure 1)
• Forward voltage @200 mA: 1.2 volts (maximum)
• Solder Temperatures: 260 ºC for 10 s (max)
• CASE: Void-free transfer molded thermosetting
epoxy body meeting UL94V-0
• TERMINALS: Leads, tin-lead plated solderable per
MIL-STD-750, method 2026
• POLARITY: Cathode indicated by band where diode
is to be operated with the banded end positive with
respect to the opposite end for Zener regulation
• MARKING: Part number
• TAPE & REEL option: Standard per EIA-296 (add
“TR” suffix to part number)
• WEIGHT: 0.4 grams
• See package dimensions on last page
DO-41 or
DO-204AL
(
Plastic
)
Silicon 3 Watt Zener Diode
SCOTTSDALE DIVISION
3EZ3.9D5 thru 3EZ200D5
WWW.Microsemi .COM 3EZ3.9D5 thru 3EZ200D5
ELECTRICAL CHARACTERISTICS @ 25oC
NOMINAL ZENER
VOLTAGE
(Note 2)
MAXIMUM ZENER IMPEDANCE
(Note 3)
MAXIMUM
REVERSE
CURRENT
VZ @ IZT Z
ZT @ IZT Z
ZK @ IZK I
R @ VR
MAXIMUM
ZENER
CURRENT
IZM
MAXIMUM
SURGE
CURRENT
(Note 4)
IZSM
MICRO
TYPE
NUMBER
(Note 1)
VOLTS mA OHMS OHMS mA µA VOLTS mA A
3EZ3.9D5
3EZ4.3D5
3EZ4.7D5
3EZ5.1D5
3.9
4.3
4.7
5.1
192
174
160
147
4.5
4.5
4.0
3.5
400
400
500
550
1.0
1.0
1.0
1.0
80
30
20
5.0
1.0
1.0
1.0
1.0
630
590
550
520
4.4
4.1
3.8
3.5
3EZ5.6D5
3EZ6.2D5
3EZ6.8D5
3EZ7.5D5
5.6
6.2
6.8
7.5
134
121
110
100
2.5
1.5
2.0
2.0
600
700
700
700
1.0
1.0
1.0
0.5
5.0
5.0
5.0
5.0
2.0
3.0
4.0
5.0
480
435
393
360
3.3
3.1
2.9
2.66
3EZ8.2D5
3EZ9.1D5
3EZ10D5
3EZ11D5
8.2
9.1
10
11
91
82
75
68
2.3
2.5
3.5
4.0
700
700
700
700
0.5
0.5
0.25
0.25
5.0
3.0
3.0
1.0
6.0
7.0
7.6
8.4
330
297
270
225
2.44
2.2
2.0
1.82
3EZ12D5
3EZ13D5
3EZ14D5
3EZ15D5
12
13
14
15
63
58
53
50
4.5
4.5
5.0
5.5
700
700
700
700
0.25
0.25
0.25
0.25
1.0
0.5
0.5
0.5
9.1
9.9
10.6
11.4
246
208
193
180
1.66
1.54
1.43
1.33
3EZ16D5
3EZ17D5
3EZ18D5
3EZ19D5
16
17
18
19
47
44
42
40
5.5
6.0
6.0
7.0
700
750
750
750
0.25
0.25
0.25
0.25
0.5
0.5
0.5
0.5
12.2
13
13.7
14.4
169
150
159
142
1.25
1.18
1.11
1.05
3EZ20D5
3EZ22D5
3EZ24D5
3EZ27D5
20
22
24
27
37
34
31
28
7.0
8.0
9.0
10
750
750
750
750
0.25
0.25
0.25
0.25
0.5
0.5
0.5
0.5
15.2
16.7
18.2
20.6
135
123
112
100
1.0
0.91
0.83
0.74
3EZ28D5
3EZ30D5
3EZ33D5
3EZ36D5
28
30
33
36
27
25
23
21
12
16
20
22
750
1000
1000
1000
0.25
0.25
0.25
0.25
0.5
0.5
0.5
0.5
21
22.5
25.1
27.4
96
90
82
75
0.71
0.67
0.61
0.56
3EZ39D5
3EZ43D5
3EZ47D5
3EZ51D5
39
43
47
51
19
17
16
15
28
33
38
45
1000
1500
1500
1500
0.25
0.25
0.25
0.25
0.5
0.5
0.5
0.5
29.7
32.7
35.6
38.8
69
63
57
53
0.51
0.45
0.42
0.39
3EZ56D5
3EZ62D5
3EZ68D5
3EZ75D5
56
62
68
75
13
12
11
10
50
55
70
85
2000
2000
2000
2000
0.25
0.25
0.25
0.25
0.5
0.5
0.5
0.5
42.6
47.1
51.7
56
48
44
40
36
0.36
0.32
0.29
0.27
3EZ82D5
3EZ91D5
3EZ100D5
3EZ110D5
82
91
100
110
9.1
8.2
7.5
6.8
95
115
160
225
3000
3000
3000
4000
0.25
0.25
0.25
0.25
0.5
0.5
0.5
0.5
62.2
69.2
76
83.6
33
30
27
25
0.24
0.22
0.20
0.18
3EZ120D5
3EZ130D5
3EZ140D5
3EZ150D5
120
130
140
150
6.3
5.8
5.3
5.0
300
375
475
550
4500
5000
5000
6000
0.25
0.25
0.25
0.25
0.5
0.5
0.5
0.5
91.2
98.8
106.4
114
22
21
19
18
0.16
0.15
0.14
0.13
3EZ160D5
3EZ170D5
3EZ180D5
3EZ190D5
3EZ200D5
160
170
180
190
200
4.7
4.4
4.2
4.0
3.7
625
650
700
800
875
6500
7000
7000
8000
8000
0.25
0.25
0.25
0.25
0.25
0.5
0.5
0.5
0.5
0.5
121.6
130.4
136.8
144.8
152
17
16
15
14
13
0.12
0.12
0.11
0.10
0.10
NOTES: 1. Suffix 1 indicates +/-1% tolerance, suffix 2 indicates +/-2% tolerance, suffix 3 indicates +/-3% tolerance, suffix 4 indicates +/-4%
tolerance, suffix 5 indicates +/-5% tolerance. Suffix 10 indicates +/-10%, no suffix indicates +/-20%.
2. The VZ is measured by applying IZ 40 ms +/-10 ms prior to reading. Mounting contacts are located 3/8” to ½” from inside edge of
mounting clips. Ambient temperature, TA = 25oC (+8oC/-2oC).
3. The zener impedance is derived from the 60 cycle ac voltage resulting from an ac current having an rms value equal to 10%
of the dc zener current (IZT or IZK ) is superimposed on IZT or IZK.
4. Maximum Surge Current is a non-recurrent maximum peak reverse surge with a pulse width of 8.3 ms.
Microsemi
Scottsdale Division
8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503
Page 2
Copyright 2003
7-21-2003 REV A
Silicon 3 Watt Zener Diode
Microsemi
Scottsdale Division
8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503
Page 3
Copyright 2003
7-21-2003 REV A
WWW.Microsemi .COM
SCOTTSDALE DIVISION
3EZ3.9D5 thru 3EZ200D5
3EZ3.9D5 thru 3EZ200D5
GRAPHS
TL, Lead temperature (oC) at 3/8” from body
or TA on FR4 PC Board
FIGURE 1
POWER DERATING CURVE
3EZ 110 D 5
PACKAGE DIMENSIONS
TA on FR4 PC
board
TL
3 WATT
MOLDED
ZENER
DIODE
DEVICE
TOLERANCE
NOMINAL
ZENER
VOLTAGE
Pd, Maximum Rated Power Dissipation (mW)