MCP6V01 Thermocouple Auto-Zeroed Reference Design (c) 2008 Microchip Technology Inc. DS51738B Note the following details of the code protection feature on Microchip devices: * Microchip products meet the specification contained in their particular Microchip Data Sheet. * Microchip believes that its family of products is one of the most secure families of its kind on the market today, when used in the intended manner and under normal conditions. * There are dishonest and possibly illegal methods used to breach the code protection feature. All of these methods, to our knowledge, require using the Microchip products in a manner outside the operating specifications contained in Microchip's Data Sheets. Most likely, the person doing so is engaged in theft of intellectual property. * Microchip is willing to work with the customer who is concerned about the integrity of their code. * Neither Microchip nor any other semiconductor manufacturer can guarantee the security of their code. Code protection does not mean that we are guaranteeing the product as "unbreakable." Code protection is constantly evolving. We at Microchip are committed to continuously improving the code protection features of our products. Attempts to break Microchip's code protection feature may be a violation of the Digital Millennium Copyright Act. If such acts allow unauthorized access to your software or other copyrighted work, you may have a right to sue for relief under that Act. Information contained in this publication regarding device applications and the like is provided only for your convenience and may be superseded by updates. It is your responsibility to ensure that your application meets with your specifications. MICROCHIP MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY KIND WHETHER EXPRESS OR IMPLIED, WRITTEN OR ORAL, STATUTORY OR OTHERWISE, RELATED TO THE INFORMATION, INCLUDING BUT NOT LIMITED TO ITS CONDITION, QUALITY, PERFORMANCE, MERCHANTABILITY OR FITNESS FOR PURPOSE. Microchip disclaims all liability arising from this information and its use. Use of Microchip devices in life support and/or safety applications is entirely at the buyer's risk, and the buyer agrees to defend, indemnify and hold harmless Microchip from any and all damages, claims, suits, or expenses resulting from such use. No licenses are conveyed, implicitly or otherwise, under any Microchip intellectual property rights. Trademarks The Microchip name and logo, the Microchip logo, Accuron, dsPIC, KEELOQ, KEELOQ logo, MPLAB, PIC, PICmicro, PICSTART, rfPIC, SmartShunt and UNI/O are registered trademarks of Microchip Technology Incorporated in the U.S.A. and other countries. FilterLab, Linear Active Thermistor, MXDEV, MXLAB, SEEVAL, SmartSensor and The Embedded Control Solutions Company are registered trademarks of Microchip Technology Incorporated in the U.S.A. Analog-for-the-Digital Age, Application Maestro, CodeGuard, dsPICDEM, dsPICDEM.net, dsPICworks, dsSPEAK, ECAN, ECONOMONITOR, FanSense, In-Circuit Serial Programming, ICSP, ICEPIC, Mindi, MiWi, MPASM, MPLAB Certified logo, MPLIB, MPLINK, mTouch, PICkit, PICDEM, PICDEM.net, PICtail, PIC32 logo, PowerCal, PowerInfo, PowerMate, PowerTool, REAL ICE, rfLAB, Select Mode, Total Endurance, WiperLock and ZENA are trademarks of Microchip Technology Incorporated in the U.S.A. and other countries. SQTP is a service mark of Microchip Technology Incorporated in the U.S.A. All other trademarks mentioned herein are property of their respective companies. (c) 2008, Microchip Technology Incorporated, Printed in the U.S.A., All Rights Reserved. Printed on recycled paper. Microchip received ISO/TS-16949:2002 certification for its worldwide headquarters, design and wafer fabrication facilities in Chandler and Tempe, Arizona; Gresham, Oregon and design centers in California and India. The Company's quality system processes and procedures are for its PIC(R) MCUs and dsPIC(R) DSCs, KEELOQ(R) code hopping devices, Serial EEPROMs, microperipherals, nonvolatile memory and analog products. In addition, Microchip's quality system for the design and manufacture of development systems is ISO 9001:2000 certified. DS51738B-page ii (c) 2008 Microchip Technology Inc. MCP6V01 THERMOCOUPLE AUTO-ZEROED REFERENCE DESIGN Table of Contents Preface ........................................................................................................................... 1 Introduction............................................................................................................ 1 Document Layout .................................................................................................. 1 Conventions Used in this Guide ............................................................................ 2 Recommended Reading........................................................................................ 3 The Microchip Web Site ........................................................................................ 3 Customer Support ................................................................................................. 4 Document Revision History ................................................................................... 4 Chapter 1. Product Overview 1.1 Introduction ..................................................................................................... 5 1.2 MCP6V01 Thermocouple Auto-Zeroed Reference Design Kit Contents ........ 5 1.3 MCP6V01 Thermocouple Auto-Zeroed Reference Design Description ......... 6 Chapter 2. Installation and Operation 2.1 Introduction ................................................................................................... 11 2.2 Required Tool ............................................................................................... 11 2.3 MCP6V01 Thermocouple Auto-Zeroed Reference Design Setup ................ 11 2.4 MCP6V01 Thermocouple Auto-Zeroed Reference Design Operation ......... 12 Appendix A. Schematic and Layout A.1 Introduction .................................................................................................. 17 A.2 Board - Schematic ....................................................................................... 18 A.3 Board - Top Silk Layer ................................................................................. 19 A.4 Board - Top Metal Layer .............................................................................. 19 A.5 Board - Metal Layer 2 .................................................................................. 20 A.6 Board - Metal Layer 3 .................................................................................. 20 A.7 Board - Bottom Silk Layer (Bottom View) .................................................... 21 A.8 Board - Bottom Layer ................................................................................... 21 Appendix B. Bill Of Materials (BOM) Worldwide Sales and Service .................................................................................... 26 (c) 2008 Microchip Technology Inc. DS51738B-page iii MCP6V01 Thermocouple Auto-Zeroed Reference Design NOTES: DS51738B-page iv (c) 2008 Microchip Technology Inc. MCP6V01 THERMOCOUPLE AUTO-ZEROED REFERENCE DESIGN Preface NOTICE TO CUSTOMERS All documentation becomes dated, and this manual is no exception. Microchip tools and documentation are constantly evolving to meet customer needs, so some actual dialogs and/or tool descriptions may differ from those in this document. Please refer to our web site (www.microchip.com) to obtain the latest documentation available. Documents are identified with a "DS" number. This number is located on the bottom of each page, in front of the page number. The numbering convention for the DS number is "DSXXXXXA", where "XXXXX" is the document number and "A" is the revision level of the document. For the most up-to-date information on development tools, see the MPLAB(R) IDE on-line help. Select the Help menu, and then Topics to open a list of available on-line help files. INTRODUCTION This chapter contains general information that will be useful to know before using the MCP6V01 Thermocouple Auto-Zeroed Reference Design. Items discussed in this chapter include: * * * * * * Document Layout Conventions Used in this Guide Recommended Reading The Microchip Web Site Customer Support Document Revision History DOCUMENT LAYOUT This document describes how to use the MCP6V01 Thermocouple Auto-Zeroed Reference Design as a development tool to emulate and debug firmware on a target board. The manual layout is as follows: * Chapter 1. "Product Overview" - Provides the important information about the MCP6V01 Thermocouple Auto-Zeroed Reference Design. * Chapter 2. "Installation and Operation" - Covers the installation and operation of the MCP6V01 Thermocouple Auto-Zeroed Reference Design. It shows how to set up the board, and demonstrates how to verify the operation. * Appendix A. "Schematic and Layout" - Shows the schematic and board layouts for the MCP6V01 Thermocouple Auto-Zeroed Reference Design. * Appendix B. "Bill Of Materials (BOM)" - Lists the parts used to build the MCP6V01 Thermocouple Auto-Zeroed Reference Design. (c) 2008 Microchip Technology Inc. DS51738B- page 1 MCP6V01 Thermocouple Auto-Zeroed Reference Design CONVENTIONS USED IN THIS GUIDE This manual uses the following documentation conventions: DOCUMENTATION CONVENTIONS Description Arial font: Italic characters Represents Referenced books Emphasized text A window A dialog A menu selection A field name in a window or dialog A menu path MPLAB(R) IDE User's Guide ...is the only compiler... the Output window the Settings dialog select Enable Programmer "Save project before build" A dialog button A tab A number in verilog format, where N is the total number of digits, R is the radix and n is a digit. A key on the keyboard Click OK Click the Power tab 4`b0010, 2`hF1 Italic Courier New Sample source code Filenames File paths Keywords Command-line options Bit values Constants A variable argument Square brackets [ ] Optional arguments Curly brackets and pipe character: { | } Ellipses... Choice of mutually exclusive arguments; an OR selection Replaces repeated text #define START autoexec.bat c:\mcc18\h _asm, _endasm, static -Opa+, -Opa0, 1 0xFF, `A' file.o, where file can be any valid filename mcc18 [options] file [options] errorlevel {0|1} Initial caps Quotes Underlined, italic text with right angle bracket Bold characters N`Rnnnn Text in angle brackets < > Courier New font: Plain Courier New Represents code supplied by user DS51738B- page 2 Examples File>Save Press <Enter>, <F1> var_name [, var_name...] void main (void) { ... } (c) 2008 Microchip Technology Inc. Preface RECOMMENDED READING This user's guide describes how to use MCP6V01 Thermocouple Auto-Zeroed Reference Design. Other useful documents are listed below. The following Microchip documents are available and recommended as supplemental reference resources. MCP6V01/2/3/6/7/8 Data Sheet, "Auto-Zeroed Op Amps" (DS51738) This data sheet provides detailed information regarding the MCP6V0X Op Amps. MCP6001/2/4 Data Sheet, "1 MHz, Low-Power Op Amps" (DS21733) This data sheet provides detailed information regarding the MCP600X Op Amps. MCP1525/41 Data Sheet, "2.5V and 4.096V Voltage References" (DS21653) This data sheet provides detailed information on the MCP15XX Voltage References. MCP9800/1/2/3 Data Sheet, "2-Wire High-Accuracy Temperature Sensor" (DS21909) This data sheet provides detailed information regarding the MCP980X Temperature Sensors. PIC18F2455/2550/4455/4550 Data Sheet, "28/40/44-Pin, High-Performance, Enhanced Flash, USB Microcontrollers with nanoWatt Technology" (DS39632) This data sheet provides detailed information regarding the PIC18F2455/2550/4455/4550 Microcontrollers. AN679, "Temperature Sensing Technologies" (DS00679) This application note covers the most popular temperature sensor technologies and helps determine the most appropriate sensor for an application. AN684, "Single Supply Temperature Sensing with Thermocouples" (DS00684) This application note focuses on thermocouple circuit solutions. It builds from signal conditioning components to complete application circuits. AN699, "Anti-Aliasing, Analog Filters for Data Acquisition Systems" (DS00699) A tutorial on active analog filters and their most common applications. "Signal Chain Design Guide" (DS21825) THE MICROCHIP WEB SITE Microchip provides online support via our web site at www.microchip.com. This web site is used as a means to make files and information easily available to customers. Accessible by using your favorite Internet browser, the web site contains the following information: * Product Support - Data sheets and errata, application notes and sample programs, design resources, user's guides and hardware support documents, latest software releases and archived software * General Technical Support - Frequently Asked Questions (FAQs), technical support requests, online discussion groups, Microchip consultant program member listing * Business of Microchip - Product selector and ordering guides, latest Microchip press releases, listing of seminars and events, listings of Microchip sales offices, distributors and factory representatives (c) 2008 Microchip Technology Inc. DS51738B- page 3 MCP6V01 Thermocouple Auto-Zeroed Reference Design CUSTOMER SUPPORT Users of Microchip products can receive assistance through several channels: * * * * Distributor or Representative Local Sales Office Field Application Engineer (FAE) Technical Support Customers should contact their distributor, representative or field application engineer (FAE) for support. Local sales offices are also available to help customers. A listing of sales offices and locations is included in the back of this document. Technical support is available through the web site at: http://support.microchip.com DOCUMENT REVISION HISTORY Revision B (December 2008) * Updated the Bottom Metal Layer print. * Updated Product Review. Revision A (May 2008) * Initial Release of this Document. DS51738B- page 4 (c) 2008 Microchip Technology Inc. MCP6V01 THERMOCOUPLE AUTO-ZEROED REFERENCE DESIGN Chapter 1. Product Overview 1.1 INTRODUCTION The MCP6V01 Thermocouple Auto-Zeroed Reference Design is described by the following: * Assembly # : 114-00169 * Order # : MCP6V01RD-TCPL * Name: MCP6V01 Thermocouple Auto-Zeroed Reference Design Board Items discussed in this chapter include: * MCP6V01 Thermocouple Auto-Zeroed Reference Design Board Kit Contents * MCP6V01 Thermocouple Auto-Zeroed Reference Design Board Description * Associated Tools 1.2 MCP6V01 THERMOCOUPLE AUTO-ZEROED REFERENCE DESIGN KIT CONTENTS * * * * MCP6V01 Thermocouple Auto-Zeroed Reference Design (102-00169) Important "Read First" Information Accessory Bag - Contains a K-type thermocouple and an USB cable Analog and Interface Products Demonstration Boards CD-ROM (DS21912) includes: - MCP6V01 Thermocouple Auto-Zeroed Reference Design (D51738) - Thermal Management Software - Firmware for PIC18F2550 FIGURE 1-1: (c) 2008 Microchip Technology Inc. MCP6V01 Thermocouple Auto-Zeroed Reference Design Kit. DS51738B- page 5 MCP6V01 Thermocouple Auto-Zeroed Reference Design 1.3 MCP6V01 THERMOCOUPLE AUTO-ZEROED REFERENCE DESIGN DESCRIPTION 1.3.1 Function Block Diagram Description The MCP6V01 Thermocouple Auto-Zeroed Reference Design demonstrates how to measure electromotive force (EMF) voltage at the cold junction of the thermocouple in order to accurately measure temperature at the hot junction. This can be done by using the MCP6V01 auto-zeroed op amp because of its ultra low offset voltage (VOS) and high common mode rejection ratio (CMRR). * The difference amplifier is implemented using the MCP6V01 and 0.1% tolerance resistors. It amplifies the EMF voltage at the cold junction of the thermocouple. * The MCP9800 senses temperature at the type K thermocouple's connector. It should be located as close as possible to the connector on the PCB. This measurement is used to perform cold junction compensation for the thermocouple measurement. * The MCP1541 provides a VREF (4.1V) to the internal 10-Bit ADC of the PIC18F2550 and sets the reference voltage for the difference amplifier. * The CVREF is the internal comparator voltage reference of PIC18F2550, which is a 16-tap resistor ladder network that provides a selectable reference voltage. The MCP6001 buffer amplifier eliminates the voltage reference output impedance problem and produces the voltage VSHIFT. * The 2nd order RC low-pass filter that is implemented in this circuit can remove the high frequency noise and aliasing at the ADC input. The ADC of PIC18F2550 completes the analog-to-digital conversion. The data will be transferred to the PC using the USB interface. * The Thermal Management Software on PC is used to perform data display to show the real-time temperature and apply cold junction compensation and data linearization to determine the actual temperature of the thermocouple's hot junction (weld bead). DS51738B- page 6 (c) 2008 Microchip Technology Inc. Product Overview Figure 1-2 shows the function block diagram of the MCP6V01 Thermocouple Auto-Zeroed Reference Design. PC (Thermal Management Software) USB PIC18F2550 (USB) Microcontroller I2C Port CVREF 10-Bit ADC Module VOUT2 MCP6001 3 Buffer 2nd Order RC Low-Pass Filter x1 MCP1541 4.1V Voltage Reference VOUT1 SDA SCKL ALERT Cold Junction Compensation MCP9800 Temp. Sensor VSHIFT Difference Amplifier MCP6V01 TCJ VREF Type K Thermocouple + VIN+ TTC - VINConnector (Cold Junction) Welded Bead (Hot Junction) FIGURE 1-2: Function Block Diagram of the MCP6V01 Thermocouple Auto-Zeroed Reference Design. (c) 2008 Microchip Technology Inc. DS51738B- page 7 MCP6V01 Thermocouple Auto-Zeroed Reference Design 1.3.2 Analog Sensing Circuit Diagram Description * Difference Amplifier - Uses a MCP6V01 auto-zeroed op amp (U5) - Two 0.1% tolerance gain resistors (R8 and R11) - Two 0.1% tolerance input resistors for shifting VOUT1 (R9 and R10) - Two 0.1% tolerance input resistors for the thermocouple output (R6 and R7) * Buffer Amplifier - Uses a MCP6001 standard op amp (U4) - Outputs VSHIFT which shifts VOUT1 by 16 different values - Sends VSHIFT back to PIC's internal ADC to make calculated result more accurate * 2nd Order RC Low-Pass Filter - Fast enough to quick changes in temperature - Double pole for anti-aliasing and removing high-frequency noise - No DC offset and simple architecture Figure 1-3 shows the analog sensing circuit diagram of MCP6V01 Thermocouple Auto-Zeroed Reference Design. Buffer Amplifier Difference Amplifier VSHIFT R9 5.6k R8 100k MCP6001 CVREF 2nd Order RC Low-Pass Filter VDD U4 0.1 F R6 100O VINR7 100O VIN+ R12 VOUT1 499O R13 499O VOUT2 MCP6V01 U5 C6 0.1 F C7 0.1 F VREF = 4.1V R9 5.6k R8 100k FIGURE 1-3: Analog Sensing Circuit Diagram of the MCP6V01 Thermocouple Auto-Zeroed Reference Design. DS51738B- page 8 (c) 2008 Microchip Technology Inc. Product Overview 1.3.3 VSHIFT Operation Description CVREF produces VSHIFT through the buffer amplifier. VSHIFT is brought back to the PIC18F2550 so that it can be sampled by the ADC, then used to adjust the measured VOUT1. This makes the VSHIFT values accurate to the 10-Bit ADC's capability. The values within each range also have a resolution of 10 bits. Thus, this gives 14 bits of resolution in total. * 14-Bit Resolution, 10-Bit ADC - PIC18F2550's CVREF (16 levels) subdivides input ranges - PIC18F2550's internal 10-Bit ADC converts result and calibrates CVREF - The firmware automatically searches for correct CVREF value * This solution minimizes cost by using resources internal to the PIC to achieve reasonable resolution without an external ADC. Further savings could be achieved by using a voltage reference internal to the PIC instead of the external MCP1541. Note: VOUT1, VSHIFT1 and VIN+ - VIN- are not drawn to scale. This is a conceptual diagram only. Figure 1-4 shows the conceptual diagram of the VSHIFT operation. PIC's internal 10-Bit ADC V REF V SHIFT x1 CV REF V IN+ Buffer MCP6001 Difference Amplifier MCP6V01 V OUT1 V IN- VOUT1 without VSHIFT VOUT1 with VSHIFT 4.1V VSHIFT VIN+ - VIN- FIGURE 1-4: (c) 2008 Microchip Technology Inc. 1100 1000 900 800 700 600 500 400 300 200 100 0 TTC (C) VSHIFT Operation Conceptual Diagram. DS51738B- page 9 MCP6V01 Thermocouple Auto-Zeroed Reference Design The MCP6V01 Thermocouple Auto-Zeroed Reference Design has the following features: * * * * * * * DS51738B- page 10 Uses a MCP6V01 difference amplifier as an analog sensor conditioning circuit Uses the K-type thermocouple to sense temperature Temperature range is from -100C to +1000C Uses the MCP9800 Temperature Sensor for cold junction compensation Uses the USB interface to transfer data to PC 14-Bit Resolution, 10-Bit ADC Test points for bench work (c) 2008 Microchip Technology Inc. MCP6V01 THERMOCOUPLE AUTO-ZEROED REFERENCE DESIGN Chapter 2. Installation and Operation 2.1 INTRODUCTION This chapter shows how to set up the MCP6V01 Thermocouple Auto-Zeroed Reference Design and explores the operation of a temperature measurement application. Items discussed in this chapter include: * Required Tools * MCP6V01 Thermocouple Auto-Zeroed Reference Design Setup * MCP6V01 Thermocouple Auto-Zeroed Reference Design Operation 2.2 REQUIRED TOOL * The Personal Computer (PC) shown in Figure 1-2 needs to run on Windows(R) 98 SE or later. It provides a convenient interface for the user, communicates with the boards, and provides power through the USB connection. 2.3 MCP6V01 THERMOCOUPLE AUTO-ZEROED REFERENCE DESIGN SETUP 1. Connect the type K thermocouple and the USB cable to the MCP6V01 Thermocouple Auto-Zeroed Reference Design. An exploded view is shown in the Figure 2-1. FIGURE 2-1: (c) 2008 Microchip Technology Inc. MCP6V01 Thermocouple Auto-Zeroed Reference Design Setup. DS51738B-page 11 MCP6V01 Thermocouple Auto-Zeroed Reference Design 2.4 MCP6V01 THERMOCOUPLE AUTO-ZEROED REFERENCE DESIGN OPERATION 1. Start the Thermal Management Software on the PC. If the hardware is connected properly, the software will recognize the hardware and this is confirmed by showing the Thermocouple Instrumentation GUI Using MCP6V01 panel, as indicated in Figure 2-2. Otherwise, the software will show the Hardware Not Detected message box, as indicated in Figure 2-3. FIGURE 2-2: Thermocouple Instrumentation GUI Using MCP6V01. FIGURE 2-3: Hardware Not Detected Message Box. DS51738B-page 12 (c) 2008 Microchip Technology Inc. Installation and Operation 2.4.1 Set Up the MCP9800 Temperature Sensor Configuration 1. Click the MCP9800 Setup tab. 2. The MCP9800 Configuration can be modified from the default values. 3. Click the Update Temp. button to complete the modifications. FIGURE 2-4: MCP9800 Setup. (c) 2008 Microchip Technology Inc. DS51738B-page 13 MCP6V01 Thermocouple Auto-Zeroed Reference Design 2.4.2 Set Up the Thermocouple Configuration 1. Click the Thermocouple Setup tab. 2. Enable thermocouple is selected as default. Enable Calibration also can be selected. 3. Click the Update button to complete the setup. . FIGURE 2-5: DS51738B-page 14 Thermocouple setup. (c) 2008 Microchip Technology Inc. Installation and Operation 2.4.3 Customize the Realtime Data Aquisition 1. Double click on the region of the stipchart to customize the Realtime Data Aquisition. . FIGURE 2-6: (c) 2008 Microchip Technology Inc. Realtime Data Aquisition Customization. DS51738B-page 15 MCP6V01 Thermocouple Auto-Zeroed Reference Design 2.4.3.1 START THE REALTIME DATA AQUISITION 1. Click the PLAY button to start the Realtime Data Aquisition. FIGURE 2-7: DS51738B-page 16 Start Realtime Data Aquisition. (c) 2008 Microchip Technology Inc. MCP6V01 THERMOCOUPLE AUTO-ZEROED REFERENCE DESIGN Appendix A. Schematic and Layout A.1 INTRODUCTION This appendix contains the following schematics and layouts for the MCP6V01 Thermocouple Auto-Zeroed Reference Design: * * * * * * * Board - Schematic Board - Top Silk Layer Board - Top Metal Layer Board - Metal Layer 2 Board - Metal Layer 3 Board - Bottom Silk Layer Board - Bottom Metal Layer (c) 2008 Microchip Technology Inc. DS51738B-page 17 MCP6V01 Thermocouple Auto-Zeroed Reference Design BOARD - SCHEMATIC M A.2 DS51738B-page 18 (c) 2008 Microchip Technology Inc. Schematic and Layout A.3 BOARD - TOP SILK LAYER A.4 BOARD - TOP METAL LAYER (c) 2008 Microchip Technology Inc. DS51738B-page 19 MCP6V01 Thermocouple Auto-Zeroed Reference Design A.5 BOARD - METAL LAYER 2 A.6 BOARD - METAL LAYER 3 DS51738B-page 20 (c) 2008 Microchip Technology Inc. Schematic and Layout A.7 BOARD - BOTTOM SILK LAYER (BOTTOM VIEW) A.8 BOARD - BOTTOM METAL LAYER (c) 2008 Microchip Technology Inc. DS51738B-page 21 MCP6V01 Thermocouple Auto-Zeroed Reference Design NOTES: DS51738B-page 22 (c) 2008 Microchip Technology Inc. MCP6V01 THERMOCOUPLE AUTO-ZEROED REFERENCE DESIGN Appendix B. Bill Of Materials (BOM) TABLE B-1: Qty BILL OF MATERIALS (BOM) Reference Description Manufacturer Part Number 5 C1, C6, C7, C13, CAP .1UF 25V CERAMIC X7R C14 0805 Panasonic(R) - ECG ECJ-2VB1E104K 1 C2 CAP 1.0UF 25V CERAMIC F 0805 Panasonic - ECG ECJ-2FF1E105Z 2 C3, C4 CAP CER 10UF 16V Y5V 0805 Murata Electronics(R) North GRM21BF51C106ZE15 America L 1 C5 CAP 1.0UF 25V CERAMIC F 0603 Panasonic - ECG ECJ-1VF1E105Z 1 C8 CAP .47UF 25V CERAMIC Y5V Panasonic - ECG 0805 ECJ-2YF1E474Z 2 C9, C10 CAP 22PF 50V CERM CHIP 0805 SMD Panasonic - ECG ECJ-2VC1H220J 2 C11, C12 CAP .1UF 25V CERAMIC X7R 0603 Panasonic - ECG ECJ-1VB1E104K 1 J1 Circuit Board Thermocouple Connectors, Standard OMEGA PCC-SMP-K-100 1 J2 HEADER 1X6 DO NOT POPULATE -- -- 1 J3 CONN RECEPT MINI USB2.0 5POS Hirose Electronic Co Ltd UX60-MB-5ST 1 L1 INDUCTOR 10UH 100MA 0805 Murata Electronics North America LQM21FN100M70L 1 PCB RoHS Compliant Bare PCB, Thermocouple Auto-Zero RD Board 104-00169 3 R1, R2, R5 RES 10.0K OHM 1/8W 1% 0805 Panasonic - ECG SMD ERJ-6ENF1002V 1 R3 RES 1.0 OHM 1/8W 1% 0805 SMD Panasonic - ECG ERJ-6RQF1R0V 1 R4 RES 100K OHM 1/8W 1% 0805 Panasonic - ECG SMD ERJ-6ENF1003V 2 R6, R7 RES 100 OHM 1/10W 0.1% 0805 SMD Panasonic - ECG ERA-6AEB101V 2 R8, R11 RES 100K OHM 1/10W 0.1% 0805 SMD Panasonic - ECG ERA-6AEB104V 2 R9, R10 RES 5.6K OHM 1/10W 0.1% 0805 SMD Panasonic - ECG ERA-6AEB562V 2 R12, R13 RES 499 OHM 1/8W 1% 0805 SMD Panasonic - ECG ERJ-6ENF4990V Note 1: -- The components listed in this Bill of Materials are representative of the PCB assembly. The released BOM used in manufacturing uses all RoHS-compliant components. (c) 2008 Microchip Technology Inc. DS51738B-page 23 MCP6V01 Thermocouple Auto-Zeroed Reference Design TABLE B-1: Qty BILL OF MATERIALS (BOM) (CONTINUED) Reference Description Manufacturer Part Number 3 R14, R15, R16 RES 1.0K OHM 1/10W 1% 0603 Panasonic - ECG SMD ERJ-3EKF1001V 1 Thermocouples (5 Per Pack) Ready-Made Insulated Thermo- OMEGA couples with Kapton, PFA, Glass Braid Insulation and Molded Connectors 5SRTC-TT-K-24-36 (5 Pcs. Per Pack) 10 TP1---TP10 TEST POINT PC COMPACT SMT Keystone Electronics(R) 5016 1 U1 28/40/44-Pin, High-Performance, Enhanced Flash, USB Microcontrollers with nanoWatt Technology Microchip Technology Inc. PIC18F2550-I/SO Microchip Technology Inc. MCP1541T-I/TT 1 U2 4.096V Voltage Reference 1 U3 Memory Module Digital Temper- Microchip Technology Inc. ature Sensor, MCP9800 MCP9800A0T-M/OTG 1 U4 MCP6001, SOT-23-5 Microchip Technology Inc. MCP6001T-I/OT 1 U5 MCP60V1, SOIC-8 Microchip Technology Inc. MCP6V01T-E/SN 1 Y1 CRYSTAL 20.0000 MHZ SERIES SMT CTS-Frequency Controls ATS200SM Note 1: The components listed in this Bill of Materials are representative of the PCB assembly. The released BOM used in manufacturing uses all RoHS-compliant components. DS51738B-page 24 (c) 2008 Microchip Technology Inc. Bill Of Materials (BOM) NOTES: (c) 2008 Microchip Technology Inc. DS51738B-page 25 WORLDWIDE SALES AND SERVICE AMERICAS ASIA/PACIFIC ASIA/PACIFIC EUROPE Corporate Office 2355 West Chandler Blvd. Chandler, AZ 85224-6199 Tel: 480-792-7200 Fax: 480-792-7277 Technical Support: http://support.microchip.com Web Address: www.microchip.com Asia Pacific Office Suites 3707-14, 37th Floor Tower 6, The Gateway Harbour City, Kowloon Hong Kong Tel: 852-2401-1200 Fax: 852-2401-3431 India - Bangalore Tel: 91-80-4182-8400 Fax: 91-80-4182-8422 India - New Delhi Tel: 91-11-4160-8631 Fax: 91-11-4160-8632 Austria - Wels Tel: 43-7242-2244-39 Fax: 43-7242-2244-393 Denmark - Copenhagen Tel: 45-4450-2828 Fax: 45-4485-2829 India - Pune Tel: 91-20-2566-1512 Fax: 91-20-2566-1513 France - Paris Tel: 33-1-69-53-63-20 Fax: 33-1-69-30-90-79 Japan - Yokohama Tel: 81-45-471- 6166 Fax: 81-45-471-6122 Germany - Munich Tel: 49-89-627-144-0 Fax: 49-89-627-144-44 Atlanta Duluth, GA Tel: 678-957-9614 Fax: 678-957-1455 Boston Westborough, MA Tel: 774-760-0087 Fax: 774-760-0088 Chicago Itasca, IL Tel: 630-285-0071 Fax: 630-285-0075 Dallas Addison, TX Tel: 972-818-7423 Fax: 972-818-2924 Detroit Farmington Hills, MI Tel: 248-538-2250 Fax: 248-538-2260 Kokomo Kokomo, IN Tel: 765-864-8360 Fax: 765-864-8387 Los Angeles Mission Viejo, CA Tel: 949-462-9523 Fax: 949-462-9608 Santa Clara Santa Clara, CA Tel: 408-961-6444 Fax: 408-961-6445 Toronto Mississauga, Ontario, Canada Tel: 905-673-0699 Fax: 905-673-6509 Australia - Sydney Tel: 61-2-9868-6733 Fax: 61-2-9868-6755 China - Beijing Tel: 86-10-8528-2100 Fax: 86-10-8528-2104 China - Chengdu Tel: 86-28-8665-5511 Fax: 86-28-8665-7889 Korea - Daegu Tel: 82-53-744-4301 Fax: 82-53-744-4302 China - Hong Kong SAR Tel: 852-2401-1200 Fax: 852-2401-3431 Korea - Seoul Tel: 82-2-554-7200 Fax: 82-2-558-5932 or 82-2-558-5934 China - Nanjing Tel: 86-25-8473-2460 Fax: 86-25-8473-2470 Malaysia - Kuala Lumpur Tel: 60-3-6201-9857 Fax: 60-3-6201-9859 China - Qingdao Tel: 86-532-8502-7355 Fax: 86-532-8502-7205 Malaysia - Penang Tel: 60-4-227-8870 Fax: 60-4-227-4068 China - Shanghai Tel: 86-21-5407-5533 Fax: 86-21-5407-5066 Philippines - Manila Tel: 63-2-634-9065 Fax: 63-2-634-9069 China - Shenyang Tel: 86-24-2334-2829 Fax: 86-24-2334-2393 Singapore Tel: 65-6334-8870 Fax: 65-6334-8850 China - Shenzhen Tel: 86-755-8203-2660 Fax: 86-755-8203-1760 Taiwan - Hsin Chu Tel: 886-3-572-9526 Fax: 886-3-572-6459 China - Wuhan Tel: 86-27-5980-5300 Fax: 86-27-5980-5118 Taiwan - Kaohsiung Tel: 886-7-536-4818 Fax: 886-7-536-4803 China - Xiamen Tel: 86-592-2388138 Fax: 86-592-2388130 Taiwan - Taipei Tel: 886-2-2500-6610 Fax: 886-2-2508-0102 China - Xian Tel: 86-29-8833-7252 Fax: 86-29-8833-7256 Thailand - Bangkok Tel: 66-2-694-1351 Fax: 66-2-694-1350 Italy - Milan Tel: 39-0331-742611 Fax: 39-0331-466781 Netherlands - Drunen Tel: 31-416-690399 Fax: 31-416-690340 Spain - Madrid Tel: 34-91-708-08-90 Fax: 34-91-708-08-91 UK - Wokingham Tel: 44-118-921-5869 Fax: 44-118-921-5820 China - Zhuhai Tel: 86-756-3210040 Fax: 86-756-3210049 01/02/08 DS51738B-page 26 (c) 2008 Microchip Technology Inc. Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Microchip: MCP6V01RD-TCPL