LITE-ON TECHNOLOGY CORP. Property of Lite-on Only 6N135/6N136 - High Speed 1MBd Optocouplers FEATURES Aug 2008 * High speed - 1MBd * CTR guarantee - 0 ~ 70 * Instantaneous common mode rejection - 1KV/s * UL, CSA, IEC/EN/DIN EN60747-5-2 - Pending * Dual-in-line package - 6N135 / 6N136 * Wide lead spacing package - 6N135M / 6N136M * Surface mounting package - 6N135S / 6N136S * Tape and reel packaging - 6N135S-TA / 6N136S-TA, 6N135S-TA1 / 6N136S-TA1 APPLICATIONS * High Voltage Isolation * Line receivers * Feedback Element in Switching Mode Power Supplier * High Speed Logic Ground Isolation - TTL/TTL, TTL/CMOS, TTL/LSTTL DESCRIPTION These diode-transistor photocouplers consist of an AlGaAs LED optically coupled to high speed photodetector transistor. Separate connections for the bias of the photodiode bias and output transistor collector increase the speed up to several times that of a conventional phototransistor photocouplers by reducing the capacitance of base-collector. Part No. : 6N135 / 6N136 Series (Preliminary Date Sheet) BNS-OD-C131/A4 Page : 1 of 10 LITE-ON TECHNOLOGY CORP. Property of Lite-on Only OUTLINE DIMENSIONS 6N135 / 6N136 6N135M / 6N136M *1. Year date code. *2. 2-digit work week. *3. Factory identification mark shall be marked (Z : Taiwan, Y : Thailand). Part No. : 6N135 / 6N136 Series (Preliminary Date Sheet) BNS-OD-C131/A4 Page : 2 of 10 LITE-ON TECHNOLOGY CORP. Property of Lite-on Only OUTLINE DIMENSIONS 6N135S / 6N136S *1. Year date code. *2. 2-digit work week. *3. Factory identification mark shall be marked (Z : Taiwan, Y : Thailand). Part No. : 6N135 / 6N136 Series (Preliminary Date Sheet) BNS-OD-C131/A4 Page : 3 of 10 LITE-ON TECHNOLOGY CORP. Property of Lite-on Only TAPING DIMENSIONS 6N135S-TA / 6N136S-TA 6N135S-TA1 / 6N136S-TA1 Description Tape wide Pitch of sprocket holes Distance of compartment Distance of compartment to compartment Part No. : Symbol W P0 F P2 P1 6N135 / 6N136 Series (Preliminary Date Sheet) BNS-OD-C131/A4 Dimensions in mm ( inches ) 16 0.3 ( .63 ) 4 0.1 ( .15 ) 7.5 0.1 ( .295 ) 2 0.1 ( .079 ) 12 0.1 ( .472 ) Page : 4 of 10 LITE-ON TECHNOLOGY CORP. Property of Lite-on Only ABSOLUTE MAXIMUM RATING ( Ta = 25C ) PARAMETER SYMBOL RATING UNIT Forward Current IF 25 mA Reverse Voltage VR 5 V Power Dissipation P 35 mW Supply Voltage VCC -0.5 ~ +30 V Output Voltage VO -0.5 ~ +20 V VEBR 0.5 V Average Output Current IO 8 mA Power Dissipation PO 100 mW Isolation Voltage Viso 5000 Vrms Operating Temperature Topr -40 ~ +100 C Storage Temperature Tstg -55 ~ +125 C Soldering Temperature Tsol 260 C INPUT OUTPUT Emitter-base Reverse Voltage 1 2 Notes: 1. AC For 1 Minute, R.H. = 40 ~ 60% Isolation voltage shall be measured using the following method. (1) Short between anode and cathode on the primary side and between collector and emitter on the secondary side. (2) The isolation voltage tester with zero-cross circuit shall be used. (3) The waveform of applied voltage shall be a sine wave. 2. For 10 Seconds Part No. : 6N135 / 6N136 Series (Preliminary Date Sheet) BNS-OD-C131/A4 Page : 5 of 10 LITE-ON TECHNOLOGY CORP. Property of Lite-on Only ELECTRICAL - OPTICAL CHARACTERISTICS ( TA = 25C, unless otherwise specified ) PARAMETER SYMBOL MIN. TYP. MAX. UNIT Input Forward Voltage VF -- 1.45 1.7 Input Forward Voltage Temperature Coefficient VF/Ta -- -1.6 -- Input Reverse Voltage 5.0 -- -- 7 -- 50 BVR 6N135 3 Current Transfer Ratio CTR 19 6N136 V CONDITIONS Ta=25, IF=1.6mA mV/ IF=16mA V Ta=25, IR=10A % IF=16mA, Vo=0.4V, VCC=4.5V -- 50 -- 0.4 -- 0.5 -- 0.4 IF=16mA, IO=3mA , VCC=4.5V -- 0.5 IF=0, VCC=Vo=5.5V, TA = 25C -- 1 IF=16mA, IO=1.1mA , VCC=4.5V 6N135 Logic Low (0) Output Voltage VOL -- 6N136 Logic High (1) Output Current IOH -- V A 4 Logic High (1) Supply Current ICCL -- -- 200 -- -- 1 IF=0, VCC=Vo=15V TA = 25C IF=0, VCC=Vo=15V 50 4 Logic Low (0) Supply Current IF=16mA, IO=0.8mA , VCC=4.5V uA IF=16mA, VCC=15V Vo=open IF=0, VCC=15V, Vo= open, TA = 25C A ICCH -- -- 2 IF=0, VCC=15V, Vo= open ** All typical at TA = 25 Part No. : 6N135 / 6N136 Series (Preliminary Date Sheet) BNS-OD-C131/A4 Page : 6 of 10 LITE-ON TECHNOLOGY CORP. Property of Lite-on Only SWITCHING SPECIFICATIONS (AC) ( TA = 0~70C, VCC = 5V, unless otherwise specified ) MAX. PARAMETER SYM. MIN. TYP. UNIT CONDITIONS TA=25 -- -- 1.5 IF = 16mA, RL = 4.1k (7) 6N135 -- Propagation Delay time to 4 Logic Low Output (1)(0) -- 2 s tPHL -- -- 0.8 IF = 16mA, RL = 1.9k(8) 6N136 -- -- -- -- 1.0 1.5 IF = 16mA, RL = 4.1k (7) 6N135 -- Propagation Delay time to 4 Logic High Output (0)(1) -- 2 tPLH us -- -- 0.8 IF = 16mA, RL = 1.9k(8) 6N136 -- 5 Instantaneous common mode rejection at high logic output (1) Instantaneous common mode 5 rejection at low logic output (0) CMH CML -- -- -- 1000 1000 1 -- -- V / s IF=0, VCM=10VP-P, RL=4.1k RL=1.9k V / s IF=16mA VCM=10P-P, RL=4.1k RL=1.9k ** All typical at TA = 25 Part No. : 6N135 / 6N136 Series (Preliminary Date Sheet) BNS-OD-C131/A4 Page : 7 of 10 LITE-ON TECHNOLOGY CORP. Property of Lite-on Only SWITCHING TEST CIRCUITS (AC) Switching Time Test Circuit Common Mode Immunity Test Circuit Part No. : 6N135 / 6N136 Series (Preliminary Date Sheet) BNS-OD-C131/A4 Page : 8 of 10 LITE-ON TECHNOLOGY CORP. Property of Lite-on Only ISOLATION CHARACTERISTICS PARAMETER SYMBOL MIN. TYP. MAX. UNIT 6 Isolation Resistance ( Input-output ) RI-O -- 1012 -- 6 Capacitance ( Input-output ) CI-O -- 0.6 -- CONDITIONS Ta=25, RH<45%, VI-O=500V DC pF f=1MHz ** All typical at TA = 25 Notes, 1. AC For 1 Minute, R.H. = 40 ~ 60% Isolation voltage shall be measured using the following method. (1) Short between anode and cathode on the primary side and between collector and emitter on the secondary side. (2) The isolation voltage tester with zero-cross circuit shall be used. (3) The waveform of applied voltage shall be a sine wave. 2. For 10 Seconds 3. Current Transfer Ratio (CTR) is defined as the ration of output collector current, Io, to the forward LED input current, IF, times 100%. 4. Add a 0.1uF bypass capacitor connected between pin5 and pin8 is recommended. 5. Common transient immunity in logic high level is the maximum tolerance (positive) dVCM/dt on the leading edge of the common mode pulse signal, VCM, to assure that the output will remain in a logic high state (i.e., Vo>2.0V). Common mode transient immunity in a logic low level is the maximum tolerance (negative) dVCM/dt on the teailing edge of the common mode pulse signal, VCM, to assure that the output will remain in a logic low state (i.e., Vo<0.8V). 6. Device considered a two terminal device. Pins 1, 2, 3 and 4 shorted together and Pins 5, 6, 7 and 8 shorted together. 7. The 4.1 k load represents 1 LSTTL unit load of 0.36mAand 6.1 k pull up resistor. 8. The 1.9 k load represents 1 TTL unit load of 1.6mAand 5.6 k pull up resistor. Part No. : 6N135 / 6N136 Series (Preliminary Date Sheet) BNS-OD-C131/A4 Page : 9 of 10 LITE-ON TECHNOLOGY CORP. Property of Lite-on Only Notes: - Lite-On is continually improving the quality, reliability, function or design and Lite-On reserves the right to make changes without further notices. - The products shown in this publication are designed for the general use in electronic applications such as office automation equipment, communications devices, audio / visual equipment, electrical application and instrumentation. - For equipment/devices where high reliability or safety is required, such as space applications, nuclear power control equipment, medical equipment, etc, please contact our sales representatives. - When requiring a device for any "specific" application, please contact our sales in advice. - If there are any questions about the contents of this publication, please contact us at your convenience. - The contents described herein are subject to change without prior notice. - Do not immerse unit's body in solder paste. Part No. : 6N135 / 6N136 Series (Preliminary Date Sheet) BNS-OD-C131/A4 Page : 10 of 10