LITE-ON TECHNOLOGY CORP.
Property of Lite-on Only
6N135/6N136 – Hi
g
h S
p
eed 1MBd O
p
tocou
p
lers Aug 2008
FEATURES
* High speed – 1MBd
* CTR guarantee - 0 ~ 70℃
* Instantaneous common mode rejection – 1KV/μs
* UL, CSA, IEC/EN/DIN EN60747-5-2 – Pending
* Dual-in-line package - 6N135 / 6N136
* Wide lead spacing package - 6N135M / 6N136M
* Surface mounting package - 6N135S / 6N136S
* Tape and reel packaging - 6N135S-TA / 6N136S-TA, 6N135S-TA1 / 6N136S-TA1
APPLICATIONS
* High Voltage Isolation
* Line receivers
* Feedback Element in Switching Mode Power Supplier
* High Speed Logic Ground Isolation – TTL/TTL, TTL/CMOS, TTL/LSTTL
DESCRIPTION
These diode-transistor photocouplers consist of an AlGaAs LED optically coupled to
high speed photodetector transistor.
Separate connections for the bias of the photodiode bias and output transistor collector
increase the speed up to several times that of a conventional phototransistor
photocouplers by reducing the capacitance of base-collector.
Part No. : 6N135 / 6N136 Series (Preliminary Date Sheet) Page : 1 of 10
BNS-OD-C131/A4
LITE-ON TECHNOLOGY CORP.
Property of Lite-on Only
OUTLINE DIMENSIONS
6N135 / 6N136
6N135M / 6N136M
*1. Year date code.
*2. 2-digit work week.
*3. Factory identification mark shall be marked (Z : Taiwan, Y : Thailand).
Part No. : 6N135 / 6N136 Series (Preliminary Date Sheet) Page : 2 of 10
BNS-OD-C131/A4
LITE-ON TECHNOLOGY CORP.
Property of Lite-on Only
OUTLINE DIMENSIONS
6N135S / 6N136S
*1. Year date code.
*2. 2-digit work week.
*3. Factory identification mark shall be marked (Z : Taiwan, Y : Thailand).
Part No. : 6N135 / 6N136 Series (Preliminary Date Sheet) Page : 3 of 10
BNS-OD-C131/A4
LITE-ON TECHNOLOGY CORP.
Property of Lite-on Only
TAPING DIMENSIONS
6N135S-TA / 6N136S-TA
6N135S-TA1 / 6N136S-TA1
Description Symbol Dimensions in mm ( inches )
Tape wide W 16 ± 0.3 ( .63 )
Pitch of sprocket holes P0 4 ± 0.1 ( .15 )
Distance of compartment F
P2 7.5 ± 0.1 ( .295 )
2 ± 0.1 ( .079 )
Distance of compartment to compartment P1 12 ± 0.1 ( .472 )
Part No. : 6N135 / 6N136 Series (Preliminary Date Sheet) Page : 4 of 10
BNS-OD-C131/A4
LITE-ON TECHNOLOGY CORP.
Property of Lite-on Only
ABSOLUTE MAXIMUM RATING
( Ta = 25°C )
PARAMETER SYMBOL RATING UNIT
Forward Current IF 25 mA
Reverse Voltage VR 5 V
INPUT
Power Dissipation P 35 mW
Supply Voltage VCC -0.5 ~ +30 V
Output Voltage VO -0.5 ~ +20 V
Emitter-base Reverse Voltage VEBR 0.5 V
Average Output Current IO 8 mA
OUTPUT
Power Dissipation PO 100 mW
1 Isolation Voltage Viso 5000 Vrms
Operating Temperature Topr -40 ~ +100 °C
Storage Temperature Tstg -55 ~ +125 °C
2 Soldering Temperature Tsol 260 °C
Notes:
1. AC For 1 Minute, R.H. = 40 ~ 60%
Isolation voltage shall be measured using the following method.
(1) Short between anode and cathode on the primary side and between collector and
emitter on the secondary side.
(2) The isolation voltage tester with zero-cross circuit shall be used.
(3) The waveform of applied voltage shall be a sine wave.
2. For 10 Seconds
Part No. : 6N135 / 6N136 Series (Preliminary Date Sheet) Page : 5 of 10
BNS-OD-C131/A4
LITE-ON TECHNOLOGY CORP.
Property of Lite-on Only
ELECTRICAL - OPTICAL CHARACTERISTICS
( TA = 25°C, unless otherwise specified )
PARAMETER SYMBOL MIN. TYP. MAX. UNIT CONDITIONS
Input Forward Voltage VF — 1.45 1.7 V
Ta=25℃, IF=1.6mA
Input Forward Voltage Temperature Coefficient ΔVF/ΔTa — -1.6— mV/℃ IF=16mA
Input Reverse Voltage BVR 5.0 — — V
Ta=25℃, IR=10μA
6N135 7 — 50
3 Current Transfer Ratio 6N136 CTR 19 — 50 % IF=16mA, Vo=0.4V,
VCC=4.5V
— 0.4 IF=16mA, IO=1.1mA ,
VCC=4.5V
6N135
— 0.5 IF=16mA, IO=0.8mA ,
VCC=4.5V
Logic Low (0) Output Voltage
6N136
VOL —
— 0.4
V
IF=16mA, IO=3mA ,
VCC=4.5V
— 0.5 IF=0, VCC=Vo=5.5V,
TA = 25°C
— 1 IF=0, VCC=Vo=15V
TA = 25°C
Logic High (1) Output Current IOH —
50
μA
IF=0, VCC=Vo=15V
4 Logic Low (0) Supply Current ICCL — — 200 uA
IF=16mA, VCC=15V
Vo=open
— — 1 IF=0, VCC=15V,
Vo= open, TA = 25°C
4 Logic High (1) Supply Current ICCH
— — 2
μA
IF=0, VCC=15V,
Vo= open
** All typical at TA = 25℃
Part No. : 6N135 / 6N136 Series (Preliminary Date Sheet) Page :6 of 10
BNS-OD-C131/A4
LITE-ON TECHNOLOGY CORP.
Property of Lite-on Only
SWITCHING SPECIFICATIONS (AC)
( TA = 0~70°C, VCC = 5V, unless otherwise specified )
MAX.
PARAMETER SYM. MIN. TYP.
TA=25℃
UNIT CONDITIONS
— — 1.5
6N135
— — 2
IF = 16mA,
RL = 4.1kΩ (7)
— — 0.8
4 Propagation Delay time to
Logic Low Output (1)→(0)
6N136
tPHL
— — 1.0
μs
IF = 16mA,
RL = 1.9kΩ(8)
— — 1.5
6N135
— — 2
IF = 16mA,
RL = 4.1kΩ (7)
— — 0.8
4 Propagation Delay time to
Logic High Output (0)→(1)
6N136
tPLH
— — 1
us
IF = 16mA,
RL = 1.9kΩ(8)
5 Instantaneous common mode
rejection at high logic output (1) ｜CMH｜— 1000 — V / μs
IF=0,
｜VCM｜=10VP-P,
RL=4.1kΩ
RL=1.9kΩ
5 Instantaneous common mode
rejection at low logic output (0) ｜CML｜— 1000 — V / μs
IF=16mA
｜VCM｜=10P-P,
RL=4.1kΩ
RL=1.9kΩ
** All typical at TA = 25℃
Part No. : 6N135 / 6N136 Series (Preliminary Date Sheet) Page : 7 of 10
BNS-OD-C131/A4
LITE-ON TECHNOLOGY CORP.
Property of Lite-on Only
SWITCHING TEST CIRCUITS (AC)
Switching Time Test Circuit
Common Mode Immunity Test Circuit
Part No. : 6N135 / 6N136 Series (Preliminary Date Sheet) Page : 8 of 10
BNS-OD-C131/A4
LITE-ON TECHNOLOGY CORP.
Property of Lite-on Only
ISOLATION CHARACTERISTICS
PARAMETER SYMBOL MIN. TYP. MAX. UNIT CONDITIONS
6 Isolation Resistance ( Input-output ) RI-O — 1012 —
Ta=25℃, RH<45%,
VI-O=500V DC
6 Capacitance ( Input-output ) CI-O — 0.6 — pF f=1MHz
** All typical at TA = 25℃
Notes,
1. AC For 1 Minute, R.H. = 40 ~ 60%
Isolation voltage shall be measured using the following method.
(1) Short between anode and cathode on the primary side and between collector and
emitter on the secondary side.
(2) The isolation voltage tester with zero-cross circuit shall be used.
(3) The waveform of applied voltage shall be a sine wave.
2. For 10 Seconds
3. Current Transfer Ratio (CTR) is defined as the ration of output collector current, Io,
to the forward LED input current, IF, times 100%.
4. Add a 0.1uF bypass capacitor connected between pin5 and pin8 is recommended.
5. Common transient immunity in logic high level is the maximum tolerance (positive)
dVCM/dt on the leading edge of the common mode pulse signal, VCM, to assure that the
output will remain in a logic high state (i.e., Vo>2.0V). Common mode transient
immunity in a logic low level is the m aximum tolerance (negative) dVCM/dt on the teailing
edge of the common mode pulse signal, VCM, to assure that the output will remain in a
logic low state (i.e., Vo<0.8V).
6. Device considered a two terminal device. Pins 1, 2, 3 and 4 shorted together and Pins 5, 6,
7 and 8 shorted together.
7. The 4.1 kΩ load represents 1 LSTTL unit load of 0.36mAand 6.1 kΩ pull up resistor.
8. The 1.9 kΩ load represents 1 TTL unit load of 1.6mAand 5.6 kΩ pull up resistor.
Part No. : 6N135 / 6N136 Series (Preliminary Date Sheet) Page : 9 of 10
BNS-OD-C131/A4
LITE-ON TECHNOLOGY CORP.
Property of Lite-on Only
Notes:
- Lite-On is continually improving the quality, reliability, function or design and
Lite-On reserves the right to make changes without further notices.
- The products shown in this publication are designed for the general use in electronic
applications such as office automation equipment, communications devices, audio / visual
equipment, electrical application and instrumentation.
- For equipment/devices where high reliability or safety is required, such as space applications,
nuclear power control equipment, medical equipment, etc, please contact our sales
representatives.
- When requiring a device for any ”specific” application, please contact our sales in advice.
- If there are any questions about the contents of this publication, please contact us at your
convenience.
- The contents described herein are subject to change without prior notice.
- Do not immerse unit’s body in solder paste.
Part No. : 6N135 / 6N136 Series (Preliminary Date Sheet) Page : 10 of 10
BNS-OD-C131/A4
