Alle Rechte vorbehalten/ Ald rights reserved 1 | 3 4 5 | 6 Panel cutting I max. 32,3 max.15,? 25,2 [<= * M2,9 13,240,2 3 18,440,1 [60.1 ~ ~ after screwing 3,6 (1) fy | ZZ _ Axis X HG _ f ay ! > Pd yy in Oo + 9 x = S || a 3S X see table ec al Only valid if no air gap between = RJ 45 JACK and stop area of the HOUSING C = 19,8 and D = 4,0 for solder pin data layout C = 21,0 and D = 4,1 for SMD data layout . 1 mm tickness flat seal before screwing 7 a Connector pitch on panel: _" +e Axis X = 2# mm and Axis Y = 21 mm in Receptacle mating side according to 600076-3-106 IEC - variant 04 RJ 45 jack mating references A and B .t according to IEC 60603-7 7 (1) Screwing x2 M2.5 screws between 0.5N.m and 0.8N.m | screw according to DIN 912 and ISO 4762 NO AIR GAP BETWEEN RJ45 JACK AND HOUSING RJ 45 JACK VARIANT TB X Dat. Name ' MoBstab/ ; 46. Push pull RJ Industrial Scale angled jack 09 45 551 1100 17.6 +/-0.4 EC01204 12/01/10 AB Detail. 09/08/05 AM Thermoplastic (P67 Receptacle angled jock | 09 48 551 1102 17.6 +/-0.4 35307 [15/09/08 AB | stent Orig, Size DIN A gree J 1? vartan 33093 {12/09/05| AM Blatt/ Page HARTING EURL TB 09 45 545 00 23 32985 09/08/05) AM VA ed Oat lm F-95972 Paris ow