Product Overview Relays and Optocouplers Relays and 2 Contents Relays and Optocouplers 4-5 859 Series 6-9 857 Series 10 - 13 788 Series 14 - 17 858 Series 18 - 21 286 Series 22 - 27 287 and 288 Series 28 - 31 789 Series 32 - 34 Features, Benefits, Applications Rail-Mounted Terminal Blocks with Miniature Switching Relay and Optocoupler Sockets with Miniature Switching Relay Sockets with Miniature Switching Relay Sockets with Industrial Relay Pluggable Modules - Relays Mounting Carriers with Miniature Switching Relay Relay Modules in DIN-Rail Mountable Enclosure For complete specifications visit us online at www.wago.us Service Documentation Interface Modules or look for the quick link Technical documentation Optocouplers 3 WAGO Relays and Optocouplers Features, Benefits and Applications Modern equipment design requires multiple components that can meet diverse challenges. WAGO AUTOMATION provides a broad range of relays and optocouplers to support some of the world's most demanding applications. *Easy * to install, easy to maintain *Economical * to purchase, efficient to install *Operational * reliability *Maximum * machine safety and uptime *Relays * sized to suit any space *Easy * planning and commissioning WAGO relay modules - The convenient interface between electronics and periphery In modern automation systems, electromechanical relays safely connect process peripherals with electronic control, alarm and monitoring systems. For example, relays perform the following tasks: * Electrical isolation with high isolation levels between input and output circuits * Adjustment of differing signal levels * Signal amplification and/or signal multiplication if varying potentials exist The comprehensive design of modern relays provides applications with the following benefits: * Immunity to electromagnetic interference and transient voltages * High, short-term overload capacity on both input and output sides * Minimal switching loss * A single module that switches both direct and alternating currents To perform these tasks and more, WAGO AUTOMATION offers a full range of relay modules ready to support a diverse array of applications. Depending on the task and application requirements, there is a choice of relay modules with different rated voltages, contacts, contact materials, housings and designs. In addition to standard switching relays, bistable relays, timing relays, latching relays and safety relays with force-guided contacts are also available. 4 Relays and optocouplers are used everywhere where electrical signals must be transmitted and galvanic isolation, signal adjustment or amplification are required. They are suitable for all industrial applications: process and power technology, rail vehicles, shipbuilding, as well as control cabinet applications. Benefits of WAGO relays and optocouplers: * Easy termination of conductors from 0.08 mm to 2.5 mm (28-14 AWG) * Optimized for any application * Wide range of accessories (e.g., adjacent jumpers, marking material) * Switchable loads from 1 mA to 16 A WAGO optocouplers - The modern and powerful alternative As a link between process peripherals and electronic control, alarm and monitoring systems, optocoupler modules boast the following advantages over electromechanicalrelays: * Longer service life - no mechanical wear * High switching frequency due to short switch-on and switch-off times * Vibration resistance * No contact bouncing * "Noiseless" switching * Low control power requirement WAGO AUTOMATION provides a full range of optocouplers to bring the above benefits to the following tasks: * Electrical isolation between input and output circuits * Adjustment of differing signal levels * Signal amplification Optocouplers are available with different rated voltages, switching capacities and housing options to suit any application. 5 Vibration-proof - fast - maintenance-free CAGE CLAMP(R) termination for all conductor types. solid 6 fine-stranded ferruled With a large variety of relays and optocouplers, the 859 Series will suit any industrial interface application. The compact, 6 mm-wide housing is ideal for space-restricted control panels. Simple commoning at the control and load side streamlines redundant wiring of common input and output potentials. A robust design, utilizing vibration-proof CAGECLAMP(R) Spring Pressure Connection Technology, ensures continuous and uninterrupted operation for any system. Rail-Mounted Terminal Blocks with Miniature Switching Relay and Optocoupler - 859 Series 859 Series Features/Benefits: *6 * mm-wide housing for DIN 35-rail mounting *Front-side * jumpers streamline connections *LED * for status signal indication *Each * termination point offers an integrated test location 7 Rail-Mounted Terminal Blocks with Miniature Switching Relay, 859 Series Description 14 Relay with A2 - 11 1 changeover contact A1 + 12 14 Relay with 1 changeover contact A2 11 A1 12 Relay with 1 changeover contact, with gold contacts 14 Item No. Input Nominal Voltage UN Max. Switching Voltage Max. Continuous Current 859-302 859-303 859-304 859-305 859-306 859-307 859-308 5 V DC 12 V DC 24 V DC 48 V DC 60 V DC 110 V DC 220 V DC 250 V AC 5A 859-353 859-354 859-355 859-357 859-358 12 V AC/DC 24 V AC/DC 48 V AC/DC 115 V AC/DC 230 V AC/DC 250 V AC 5A 859-314 859-317 859-318 24 V DC 115 V DC 220 V DC 36 V DC * 50 mA * 859-392 859-386 859-384 24 V DC 36 V DC 48 V DC 36 V DC * 50 mA * 859-359 859-360 230 V AC 115 V AC 36 V DC * 50 mA * 859-367 859-368 115 V AC 230 V AC 250 V AC 5A 859-390 859-391 24 V DC 110 V DC 250 V AC 3A 859-398 859-394 859-397 859-393 859-399 24 V DC 36 V DC 48 V DC 72 V DC 110 V DC 250 V AC 3A A2 - 11 Relay with 1 changeover contact, A1 + 12 with gold contacts with an extended input voltage and temperature range Relay with 1 changeover contact, with gold contacts 14 A2 ~ 11 A1 ~ 12 Relay with 1 changeover contact, with specified turn-on and turn-off threshold 14 A2 ~ 11 A1 ~ 12 Relay with 1 changeover contact, with an extended input voltage and temperature range Relay with 1 changeover contact, with an extended input voltage and temperature range 14 A2 - 11 A1 + 12 * In order to prevent the gold layer from being damaged, these values shall not be exceeded. Higher switching power leads to evaporation of the gold layer. The resulting deposits in the housing may cause sparkovers between the coil and the contact. 8 Rail-Mounted Terminal Blocks with Optocoupler, 859 Series Description A1 + 1 + A2 - 2 - RL Optocoupler with an extended output voltage and temperature range for use in railway traffic A1 + 1 + A2 - 2 - A1 + 1 + A2 - 2 - A1 + 24V RL Optocoupler Optocoupler, negative switching Power optocoupler RL RL A A2 - +A A2 - -2 -2 RL 13+ A1 + RL A2 - Optocoupler, negative switching Optocoupler, negative switching Optocoupler, negative switching Optocoupler, positive switching Optocoupler, positive switching Optocoupler 1 + 2 - 0V +24 V A RL A2 -- 0V A RL +24 V A2 -- A2 -- 859-791 859-794 24 V DC 24 V DC 7 V ... 60 V DC 9 V ... 60 V DC 100 mA 100 mA 859-795 859-796 5 V DC 24 V DC 3 V ... 30 V DC 100 mA 859-720 24 V DC 10 V ... 30 V DC 3A 859-730 24 V DC 3 V ... 30 V DC 3A 859-740 24 V DC 3 V ... 30 V DC 3A 859-744 12 V ... 48 V DC 3 V ... 53 V DC 4A 859-772 230 V AC 20 V ... 30 V DC 500 mA 859-712 230 V AC 20 V ... 30 V DC 500 mA 859-702 859-708 5 V DC 24 V DC 20 V ... 30 V DC 500 mA 859-706 24 V DC 4 V ... 6,25 V DC 500 mA 859-752 5 V DC 20 V ... 30 V DC 500 mA 859-758 24 V DC 20 V ... 30 V DC 500 mA 859-756 24 V DC 4 V ... 6,25 V DC 500 mA 859-902 5 V DC 24 V ... 260 V AC 500 mA +5 V 0V RL A A1 + 100 mA 0V A RL A2 -- 3 V ... 60 V DC 0V A1 ~ A1 + 5 V DC 24 V A RL A2 ~ A1 + 859-793 -2 3 A1 ~ Max. Continuous Current +A A1 + A2 ~ Output Voltage Range A2 - 14 Optocoupler, positive switching, increased input frequency up to 100 Hz, input voltage up to 270 V AC Input Nominal Voltage VN 0V A1 + Optocoupler, power optocoupler Item No. +24 V 0V RL A A1 + +24 V 9 857 Series Features/Benefits: S Vibration-proof - fast - maintenance-free CAGE CLAMP(R)S termination for all conductor types. *solid 10 fine-stranded *Push-in wiring technology *ferruled * Pluggable relays and optocouplers * Industry`s most compact just 6.0 mm wide * Potential commoning on every level * Integrated LED for status indication * Input voltage available in 5-230 V AC/DC variants * Up to 8 A switching current WAGO 857 Series relay and optocoupler modules are supplied in 6 mm-wide housing and share a common profile. The modules feature a single, flexible in-line jumper system (e.g., for supply voltages), eliminating discrete wiring. The pluggable relays can be replaced quickly and easily when needed. JUMPFLEX(R), Sockets with Switching Relay and Optocoupler - 857 Series An optional interface adapter plugs on the input or output side, combining eight modules and connecting them via a flat cable. Av ada e c a f r e t in ailable pter 11 Sockets with Miniature Switching Relay, 857 Series Description Relay with 1 changeover contact A1 A2 Item No. Nominal Voltage Current Carrying Capacity per Channel Max. Total Current 857-303 857-304 857-305 857-306 857-307 857-308 12 V DC 24 V DC 48 V DC 60 V DC 110 V DC 220 V DC 250 V AC 6A 857-354 857-357 857-358 24 V AC/DC 115 V AC/DC 230 V AC/DC 250 V AC 6A 857-314 857-317 857-318 24 V DC 110 V DC 220 V DC 36 V DC* / 50 mA* / (6 A ) (250 V AC/DC) 857-364 857-367 857-368 24 V AC/DC 115 V AC/DC 230 V AC/DC 36 V DC* / 50 mA* / (6 A ) (250 V AC/DC) Relay with 1 changeover contact, with gold contacts A1 A2 * In order to prevent the gold layer from being damaged, these values shall not be exceeded. (In case of damaged gold layer, the values in parenthesis apply). Higher switching power leads to evaporation of the gold layer. The resulting deposits in the housing may cause sparkovers between the coil and the contact. 8-Channel Interface Adapter for System Wiring Description Item No. Nominal Voltage Current Carrying Capacity per Channel Max. Total Current 857-981 24 V DC 1A 3A 857-982 24 V DC 1A 3A 857-986 24 V DC 1A 3A Interface 8-channel adapter with 14-pin flat cable connector, positive switching input** 13 11 9 7 5 3 1 14 12 10 8 6 4 2 + FLK 14 Interface 8-channel adapter with 14-pin flat cable connector, positive switching output*** 8-channel adapter with D-sub male connector, Input with 15-pin flat cable connector, positive switching** ** For use on the 857 Series socket's coil side *** For use on the 857 Series socket's contact side 12 13 11 9 7 5 3 1 14 12 10 8 6 4 2 + FLK 14 Interface 1 + 9 SUB-D Sockets with Solid State Relay, 857 Series Description Item No. Input Nominal Voltage VN Output Voltage Range Max. Continuous Current 857-704 24 V DC 0 V ... 48 V DC 100 mA 857-707 115 V AC/DC 0 V ... 48 V DC 100 mA 857-708 230 V AC/DC 0 V ... 48 V DC 100 mA 857-714 24 V DC 24 V ... 240 V AC 1A 857-717 115 V AC/DC 24 V ... 240 V AC 1A 857-718 230 V AC/DC 24 V ... 240 V AC 1A 857-724 24 V DC 0 V ... 24 V DC 2A 857-727 115 V AC/DC 0 V ... 24 V DC 2A 857-728 230 V AC/DC 0 V ... 24 V DC 2A 14 13 N.C. 14 Solid state relay A1 13 A2 N.C. 14 A1 13 A2 N.C. 14 13 N.C. 14 Solid state relay 13 N.C. 14 A1 13 A2 N.C. 14 13 N.C. 14 Solid state relay A1 13 A2 N.C. 14 A1 13 A2 N.C. 13 788 Series Features/Benefits: * Relays with 1 or 2 changeover contacts - up to 16 A and 250 V of switching power * DIN-rail mount modules * WMB or continuous strip * Pluggable switching status indicator (LED) with integrated recovery diode * Integrated test ports - easy troubleshooting S Vibration-proof - fast - maintenance-free CAGE CLAMP(R)S termination for all conductor types. *solid 14 fine-stranded *Push-in wiring technology *ferruled WAGO 788 Series Pluggable Relay Modules are an excellent platform for industrial and process automation switching relay applications. Featuring plug-and-play, miniature switching relays (1 or 2 changeover contacts), 788 Series relays are ultracompact, fitting where other relays do not. Sockets with Switching Relay and Optocoupler - 788 Series A compact design is just one of the 788 Series` unique and highly beneficial features. A robust, easy-to-use lever lifts/ejects relays, simplifying replacement -- even if relay modules are sidebyside. For flexibility and the reduction of part numbers, the 788 Series can be ordered as: a fully equipped relay module, a relay and LED for switching status indication, or as individual components. 15 Sockets with Miniature Switching Relay, 788 Series Max. Switching Voltage Max. Continuous Current 250 V AC 16 A 250 V AC 2x8A 24 V AC 115 V AC 230 V AC 250 V AC 16 A 788-512 788-515 788-516 24 V AC 115 V AC 230 V AC 250 V AC 2x8A Relay with 1 changeover contact, with gold contacts and status indication (15 mm high) 788-404 24 V DC 36 V DC* 50 mA* Relay with 2 changeover contacts, with gold contacts and status indication (15 mm high) 788-412 24 V DC 36 V DC* 2 x 50 mA* Relay with 1 changeover contact, with gold contacts and status indication (15 mm high) 788-607 788-608 115 V AC 230 V AC 36 V DC* 50 mA* Relay with 2 changeover contacts, with gold contacts and status indication (15 mm high) 788-615 788-616 115 V AC 230 V AC 36 V DC* 2 x 50 mA* Relay with 1 changeover contact and status indication (25 mm high) 788-324 24 V DC 250 V AC 16 A Relay with 2 changeover contacts and status indication (25 mm high) 788-334 24 V DC 250 V AC 2x8A Relay with 1 changeover contact and status indication (25 mm high) 788-528 230 V AC 250 V AC 16 A Relay with 2 changeover contacts and status indication (25 mm high) 788-538 230 V AC 250 V AC 2x8A Item No. Input Nominal Voltage VN 788-303 788-304 788-305 788-306 788-307 788-311 788-312 788-313 788-314 788-315 12 V DC 24 V DC 48 V DC 60 V DC 110 V DC 12 V DC 24 V DC 48 V DC 60 V DC 110 V DC Relay with 1 changeover contact and status indication (15 mm high) 788-506 788-507 788-508 Relay with 2 changeover contacts and status indication (15 mm high) Description Relay with 1 changeover contact and status indication (15 mm high) Relay with 2 changeover contacts and status indication (15 mm high) 16 * In order to prevent the gold layer from being damaged, these values shall not be exceeded. Higher switching power leads to evaporation of the gold layer. The resulting deposits in the housing may cause sparkovers between the coil and the contact. Sockets with Miniature Switching Relay, 788 Series Description Item No. Input Nominal Voltage VN Max. Switching Voltage Max. Continuous Current Relay with 1 changeover contact and status indication (15 mm high) 788-354 24 V DC 250 V AC 16 A 788-355 24 V DC 250 V AC 16 A Safety relay SR2M (2 changeover contacts), with force-guided contacts and status indication 788-384 24 V DC 250 V AC 6A Relay with 1 changeover contact, manual operation and status indication (25 mm high) 788-374 24 V DC 250 V AC 16 A Relay with 2 changeover contacts, manual operation and status indication (25 mm high) 788-375 24 V DC 250 V AC 8A Relay with 1 make contact and status indication (25 mm high) 14 13 Sockets with Optocoupler, 788 Series Description A1 + 14 - A2 - 13 + A1 + 14 - A2 - 13 + Optocoupler Optocoupler A1 + 14 Optocoupler A2 - Item No. Input Nominal Voltage UN Output Voltage Range Max. Continuous Current 788-700 24 V DC 0 V ... 24 V DC 3.5 A 788-701 24 V DC 0 V ... 24 V DC 5A 788-720 24 V DC 24 V ... 240 V AC 1A 13 17 858 Series Features/Benefits: * Relays with 5 A power contacts or 50 mA gold contacts for dry switching circuits * Integrated LED indicator, mechanical relay status and manual operation * Dual conductor entries with CAGE CLAMP(R)S COMPACT for all connections * Compatible with industrial relays utilizing standard pin spacing * Optional 858-402 push-in jumpers common two adjacent relays on the coil side S Vibration-proof - fast - maintenance-free CAGE CLAMP(R)S termination for all conductor types. *solid 18 fine-stranded *Push-in wiring technology *ferruled WAGO DIN-rail mount 858 Series relay sockets are designed for conventional industrial relays with standard pin spacing. The sockets carry 33.5 to 35.5 mm-high relays equipped with 2 or 4 changeover contacts. All socket contacts feature two conductor entries at each CAGE CLAMP(R)S COMPACT connection point for 2 x 0.34 mm (22 AWG) to 1.5 mm (16 AWG) cross-section. CAGE CLAMP(R)S COMPACT Spring Pressure Connection Technology provides simple, push-in termination of solid or ferruled conductors. Sockets with Industrial Relay - 858 Series Speedy Socket Service: rapidly replace relays without removing conductors. 19 Sockets with Industrial Relay, 858 Series Description Relay with 4 changeover contacts A2 + Max. Switching Voltage Max. Continuous Current 858-304 24 V DC 250 V AC / 30 V DC 5A 858-314 24 V DC 30 V DC * 50 mA * 858-507 858-508 115 V AC 230 V AC 250 V AC / 30 V DC 5A 858-517 858-518 115 V AC 230 V AC 30 V DC * 50 mA * 858-354 24 V DC 250 V AC / 30 V DC 5A 11 12 24 21 22 34 31 32 44 41 42 Relay with 4 changeover contacts, with gold contacts Relay with 4 changeover contacts 14 A1 - A2 + Relay with 4 changeover contacts, with an extended input voltage and temperature range Input Nominal Voltage VN 14 A1 - Relay with 4 changeover contacts, with gold contacts Item No. 11 12 24 21 22 34 31 32 44 41 42 * In order to prevent the gold layer from being damaged, these values shall not be exceeded. Higher switching power leads to evaporation of the gold layer. The resulting deposits in the housing may cause sparkovers between the coil and the contact. 20 21 286 Series Features/Benefits: * Easy termination of conductors from 0.08 mm to 2.5 mm (28 -12 AWG) * Space-saving combination of electrical and electronic functions on a rail-mounted terminal block * Module removal provides fast and safe separation between logic and control power Vibration-proof - fast - maintenance-free CAGE CLAMP(R) termination for all conductor types. solid 22 fine-stranded ferruled Pluggable modules for carrier terminal blocks maximize flexibility while simplifying maintenance: 1. The DIN-rail mount carrier block is wired just like a standard terminal block. 2. Modules are then plugged into the terminal block after wiring. 3. For ease of maintenance, the modules are replaced in one step without affecting terminal block wiring. Pluggable Relay and Optocoupler Modules for Carrier Terminal Blocks - 286 Series This intelligent design also saves space and reduces wiring costs. A comprehensive range of function modules is available to complement these optocoupler and relay modules. The modules seamlessly integrate any required function into control cabinets via pluggable modules. 23 Pluggable Modules - Relays, 286 Series Description Item No. Input Nominal Voltage VN Max. Switching Voltage Max. Continuous Current Relay with 1 make contact A1 + 13 A1 ~ 13 A2 - 14 24 V DC 48 V DC 60 V DC 24 V AC 115 V AC 230 V AC 30 V DC / 250 V AC 5A 14 A2 ~ 286-364 286-365 286-366 286-564 286-566 286-567 Relay with 1 break contact A1 + 11 A1 ~ 11 A2 - A2 ~ 12 24 V DC 48 V DC 60 V DC 24 V AC 250 V DC / 250 V AC 5A 12 286-368 286-369 286-370 286-568 286-302 286-303 286-304 286-305 286-306 286-307 286-308 286-502 286-503 286-504 286-505 286-506 286-507 286-508 5/6 V DC 12 V DC 24 V DC 48 V DC 60 V DC 115 V DC 220 V DC 5/6 V AC/DC 12 V AC/DC 24 V AC/DC 48 V AC/DC 60 V AC/DC 115 V AC 230 V AC 300 V DC / 250 V AC 7A 300 V DC / 250 V AC 7A 286-394 286-395 286-594 24 V DC 48 V DC 24 V AC/DC 36 V DC 1A 286-310 286-311 286-312 286-313 286-314 286-315 286-316 5/6 V DC 12 V DC 24 V DC 48 V DC 60 V DC 115 V DC 220 V DC 300 V DC / 250 V AC 7A 286-510 286-511 286-512 286-513 286-514 286-515 286-516 5/6 V AC 12 V AC 24 V AC 48 V AC 60 V AC 115 V AC 230 V AC 300 V DC / 250 V AC 7A 286-318 286-319 286-320 286-321 286-322 286-324 286-520 5/6 V DC 12 V DC 24 V DC 48 V DC 60 V DC 220 V DC 24 V AC 250 V DC / 380 V AC 6A 286-326 286-327 286-328 286-329 286-330 286-332 5/6 V DC 12 V DC 24 V DC 48 V DC 60 V DC 220 V DC 250 V DC / 380 V AC 6A 11 Relay with 1 changeover contact A1 + A2 - A2 - 12 14 11 Relay with 1 changeover contact Relay with 1 changeover contact, with gold contacts A1 ~ A2 ~ A2 ~ 12 14 11 11 A1 + A1 ~ A2 - A2 - A2 ~ A2 ~ 12 14 12 Relay with 2 changeover contacts 11 A1 + 14 21 A2 - 24 22 12 Relay with 2 changeover contacts Relay with 1 break and 1 make contact Relay with 2 make contacts 24 12 14 11 A1 ~ 14 21 A2 ~ 24 A1 + A1 + 22 11 A1 ~ A1 ~ 11 12 13 12 13 A2 - A2 - 14 A1 + A1 + A2 ~ A2 ~ 14 13 14 23 A2 - A2 - 24 Description Relay with 2 break contacts and 2 make contacts Relay with 1 break contact and 3 make contacts 11 12 11 12 A1 + 13 A1 ~ 13 A2 - 23 14 21 A2 ~ 23 14 21 24 22 24 22 11 12 11 12 A1 + 13 A1 ~ 13 A2 - 23 14 21 A2 ~ 23 14 21 24 22 24 22 Relay with 4 make contacts A1 + A2 - 32 31 34 42 41 Relay with 4 changeover contacts Relay with 1 make contact, for higher DC loads Max. Continuous Current 250 V DC / 250 V AC 5A 250 V DC / 250 V AC 5A 5/6 V DC 12 V DC 24 V DC 48 V DC 60 V DC 115 V DC 24 V AC 115 V AC 230 V AC 250 V DC / 250 V AC 5A 286-375 286-578 286-579 24 V DC 110/120 V AC 230 V AC 60 V DC / 250 V AC 2 A DC / 4 A AC 286-376 24 V DC 250 V DC / 250 V AC 5A 286-384 24 V DC 36 V DC* 50 mA * 286-904 230 V AC 250 V DC / 380 V AC 5A 286-906 24 V DC 250 V DC / 380 V AC 6A 286-571 286-570 24 V DC 230 V AC 30 V DC / 250 V AC 5A 286-380 286-381 24 V DC 24 V DC 250 V DC / 250 V AC 6A Input Nominal Voltage VN 286-334 286-335 286-336 286-337 286-338 286-339 286-536 286-540 286-342 286-343 286-344 286-345 286-346 286-347 286-544 286-547 286-548 5/6 V DC 12 V DC 24 V DC 48 V DC 60 V DC 115 V DC 24 V AC 230 V AC 5/6 V DC 12 V DC 24 V DC 48 V DC 60 V DC 115 V DC 24 V AC 115 V AC 230 V AC 286-350 286-351 286-352 286-353 286-354 286-355 286-552 286-555 286-556 11 11 A2 - A2 - 14 12 11 A1 + 14 21 A2 - 24 Relay with 1 changeover contact, with specified switching threshold 22 11 A1 ~ A2 ~ A2 ~ Relay with 1 break and 1 make contact, minimal control power 7 mW, trigger voltage Bistable relay with 1 changeover contact, positive switching / negative switching 44 A1 + Relay with 2 changeover contacts, with gold contacts Latching relay with 1 break and 1 make contact 12 11 14 22 21 24 Max. Switching Voltage Item No. 12 14 11 L + 12 13 1 L - L - A1 + A1 + 14 11 A1 ~ A1 ~ 12 13 A2 - A2 - 14 12 13 A2 ~ A2 ~ A1 + 12 A1 _ A3 _ 14 A3 + 11 A2 _ A2 + 11 14 11 12 14 25 Pluggable Modules - Relays, 286 Series Item No. Input Nominal Voltage VN Max. Switching Voltage Max. Continuous Current 286-364/004000 24 V DC 250 V AC 3A 286-368/ 004-000 24 V DC 250 V AC 3A 250 V AC/DC 3A Description Relay with 1 make contact, with an extended input voltage and temperature range Relay with 1 break contact, with an extended input voltage and temperature range Relay with 1 changeover contact, with an extended input voltage and temperature range Relay with 1 changeover contact, with gold contacts with an extended input voltage and temperature range Relay with 2 changeover contacts, with an extended input voltage and temperature range Relay with 1 break and 1 make contact, with an extended input voltage and temperature range Relay with 2 make contacts, with an extended input voltage and temperature range Relay with 2 break contacts and 2 make contacts with an extended input voltage and temperature range Relay with 1 break contact and 3 make contacts with an extended input voltage and temperature range A1 + 13 A1 ~ A2 - 14 A2 ~ A1 + 11 A1 ~ 11 A2 - 12 A2 ~ 12 26 14 286-304/ 004-000 11 A1 + A2 - A2 - 286-307/ 004-000 12 14 11 A2 - A2 - 12 11 A1 ~ A1 + 12 14 A2 ~ A2 ~ 12 14 11 A1 + 14 21 A2 - 24 A1 + A1 + 22 11 A1 ~ A1 ~ A2 - A2 - A1 + A1 + 14 11 12 13 12 13 A2 ~ A2 ~ 14 13 14 23 A2 - A2 - 24 11 12 11 12 A1 + 13 A1 ~ 13 A2 - 23 14 21 A2 ~ 23 14 21 24 22 24 22 11 12 11 12 A1 + 13 A1 ~ 13 A2 - 23 14 21 A2 ~ 23 14 21 24 22 24 22 Relay with 4 make contacts, with an extended input voltage and temperature range Relay with 1 break and 1 make contact, with an extended input voltage and temperature range 13 L + 1 L - L - 11 12 13 14 24 V DC 110 V DC 286-394/ 004-000 24 V DC 36 V DC* 50 mA * 286-312/ 004-000 24 V DC 250 V AC / 200 V DC 4A 286-320/ 004-000 24 V DC 250 V AC / 200 V DC 4A 286-328/ 004-000 24 V DC 250 V AC / 200 V DC 4A 286-336/ 001-000 24 V DC 250 V AC / 200 V DC 4A 286-344/ 004-000 24 V DC 250 V AC / 200 V DC 4A 286-352/ 004-000 24 V DC 250 V AC / 30 V DC 4A 286-906/ 004-000 24 V DC 250 V AC/DC 3A Pluggable Modules - Optocouplers, 286 Series Description Optocoupler, negative switching A1 + 1 + A2 - 3 A2 - 2 - Optocoupler, positive switching A1 + 1 + A2 - 3 A2 - 2 - Optocoupler, negative switching A1 ~ 1 + A2 ~ 3 A2 ~ 2 - Optocoupler, positive switching A1 ~ 1 + A2 ~ 3 A2 ~ 2 - Optocoupler, negative switching A1 + 1 + A2 - 3 A2 - 2 - A1 + 1 + A2 - 3 A2 - 2 - Optocoupler, positive switching A1 + 1 + A2 - 3 A2 - 2 - Optocoupler, positive switching A1 + 1 + A2 - 3 A2 - 2 - Optocoupler, negative switching Optocoupler Optocoupler, negative switching Optocoupler Optocoupler Double optocoupler Optocoupler with 2 inverted outputs Optocoupler with bridge plug for programming the output A1 + 3 A2 - 2 - A1 + 1 ~ A2 - A2 - RL RL RL RL RL RL RL 1 + A2 - Nullspannungsschalter Optocoupler, negative switching RL 2 ~ 2 ~ A1 ~ 1 + A2 ~ 3 A2 ~ 2 - A1 + 1 + A2 - 2 - A1 + 1 + A2 - 2 - RL RL ~ RL RL RL 1 + RL 2 - 3 + R L 4 - A1 + A2 - A1 + A2 - A1 + 1 + A1 + RL1 A2 - RL2 A2 - 2 - A2 - A2 - Input Nominal Voltage VN Output Voltage Range Max. Continuous Current 286-700 286-701 286-702 24 V DC 5 V DC (3 V ... 6 V DC) 15 V DC (10 V ... 20 V DC) 24 V DC (20 V ... 30 V DC) 500 mA 286-750 286-751 286-752 24 V DC 5 V DC (3 V ... 6 V DC) 15 V DC (10 V ... 20 V DC) 24 V DC (20 V ... 30 V DC) 500 mA 286-704 286-706 286-708 230 V AC 5 V DC (3.5 V ... 7 V DC) 15 V DC (10 V ... 20 V DC) 24 V DC (20 V ... 30 V DC) 500 mA 286-754 286-756 286-758 230 V AC 5 V DC (3.5 V ... 7 V DC) 15 V DC (10 V ... 20 V DC) 24 V DC (20 V ... 30 V DC) 500 mA 286-720 24 V DC 15 V ... 40 V DC 2A 286-721 24 V DC 15 V ... 40 V DC 5A 286-752/ 002-000 5 V DC 20 V ... 30 V DC 500 mA 286-723 24 V DC 20 V ... 30 V DC 4A 286-726 286-728 286-730 5 V DC 12 V DC 24 V DC 99 V ... 121 V DC 1,6 A 286-732 286-733 286-734 5 V DC 12 V DC 24 V DC 24 V ... 280 V AC 1A 286-725 10 V ... 30 V AC/DC 20 V ... 30 V DC 500 mA 286-791 24 V DC 20 V ... 60 V DC 100 mA 286-794 24 V DC 20 V ... 60 V DC 100 mA 286-792 2 x 24 V DC 2 x 20 V ... 30 V DC 2 x 250 mA 286-790 24 V DC 20 V ... 30 V DC 500 mA 286-938 24 V DC 10 V ... 30 V DC 300 mA (800 mA max. 30 s) 1 + A1 + A1 + Item No. H 1 + A L 2 - RL 27 Vibration-proof - fast - maintenance-free CAGE CLAMP(R) termination for all conductor types. solid 28 fine-stranded ferruled Equipped with relay and PLC interface modules, WAGO DIN-rail mount carriers provide fast and easy peripheral signal connections. The fully wired modules - each with up to 16 high-performance relay outputs - provide direct, in-the-field switching of actuators and other coupling elements. To extend product life and increase machine uptime, each carries integrated recovery and reverse voltage protection diodes. Mounting Carriers with Miniature Switching Relay - 287, 288 Series 287, 288 Series Features/Benefits: Custom Product Design * Modules with up to 16 relay functions * LED indicator, recovery and reverse voltage protection diodes * Pluggable and easily replaceable relays * Easy termination of conductors from 0.08 mm to 2.5 mm (28 -12 AWG) * Don`t see what you need? Just ask us. WAGO offers design/build services to your specification 29 Mounting Carriers with Miniature Switching Relay, 287, 288 Series Description Relay with 1 make contact, relay pre-soldered onto mounting carrier Relay with 1 break contact, relay pre-soldered onto mounting carrier A1 + 14 A1 ~ 14 A2 - 13 A2 ~ 13 A1 + 12 A1 ~ 12 A2 - 11 A2 ~ 11 Relay with 1 changeover contact, relay pre-soldered onto mounting carrier, with connectors Relay with 1 changeover contact, relay pre-soldered onto mounting carrier Relay with 2 changeover contacts, relay pre-soldered onto mounting carrier 16 relays with 1 changeover contact each, pluggable relays pre-installed into mounting carrier 30 A1 ~ 12 A2 ~ 11 Max. Switching Voltage Max. Continuous Current 288-364 288-564 288-565 288-567 24 V DC 24 V AC/DC 48 V AC/DC 115 V AC/DC 250 V DC / 250 V AC 5A 288-368 288-568 24 V DC 24 V AC/DCV 250 V DC / 250 V AC 5A 288-554 24 V AC/DC 250 V DC / 250 V AC 5A 288-304 288-504 288-508 24 V DC 24 V AC/DC 230 V AC 300 V DC / 250 V AC 6A 288-312 288-512 24 V DC 24 V AC/DC 250 V DC / 250 V AC 6A 288-758 288-761 288-762 24 V AC/DC 115 V AC/DC 230 V AC 300 V DC / 250 V AC 6A 287-774 24 V DC 300 V DC / 250 V AC 6A 287-804 287-814 24 V DC 24 V AC/DC 250 V DC / 250 V AC 6A 287-824 287-834 24 V DC 24 V AC/DC 300 V DC / 250 V AC 6A 287-853 287-854 12 V DC 24 V DC 250 V DC / 250 V AC 6A 11 12 A1 + 12 A1 ~ A2 - A2 - 14 11 A2 ~ A2 ~ 14 11 12 11 12 11 A1 ~ A1 + 14 24 A2 A2 - 22 21 14 24 A2 ~ 22 11 14 12 11 A2 ~ A2 ~ 14 A1 + 12 11 14 A2 + 22 21 24 A4 + _ _ A1 + 42 41 44 12 14 11 A2 + 22 24 21 A8 + 82 84 81 N N A1 + 12 11 14 A2 + 22 21 24 A8 + 82 81 84 N N A1 + A2 + A16 + N N 21 12 A1 ~ A2 ~ A2 ~ A1 ~ 4 relays with 1 changeover contact each, pluggable relays pre-installed into mounting carrier 8 relays with 1 changeover contact each, pluggable relays pre-installed into mounting carrier Input Nominal Voltage VN 14 2 relays with 1 changeover contact each, relays presoldered onto mounting carrier 8 relays with 1 changeover contact each, relays pre-soldered onto mounting carrier Item No.. A1 ~ 12 14 11 22 24 21 A2 ~ A8 ~ N N 82 84 81 A1 ~ 12 11 14 A2 ~ 22 21 24 A8 ~ N N 82 81 84 12 11 14 22 21 24 162 161 164 Item No.. Input Nominal Voltage VN Max. Switching Voltage Max. Continuous Current 288-320 24 V DC 440 V AC 16 A 287-475 24 V DC 440 V AC 16 A 287-474 24 V DC 250 V DC / 250 V AC 16 A 288-380 24 V DC 300 V DC / 250 V AC 6A 288-437 24 V DC 380 V 5A 288-435 24 V DC 300 V DC / 230 V AC 6A Safety relay, SDS SF 4 type, with 4 break contacts and 4 make contacts, 1 module, relay pre-soldered onto mounting carrier 288-412 288-413 288-414 288-415 288-416 288-418 5 V DC 12 V DC 24 V AC/DC 48 V AC/DC 60 V AC/DC 230 V AC/DC 250 V AC 6A Safety relay, SDS SF 4 type, with 4 break contacts and 4 make contacts, 2 modules, relay pre-soldered onto mounting carrier 288-422 288-423 288-424 288-425 288-426 288-428 5 V DC 12 V DC 24 V AC/DC 48 V AC/DC 60 V AC/DC 230 V AC 250 V AC 6A Description Relay with 1 make contact, relay pre-soldered onto mounting carrier, designed for switching high inrush current loads (e.g., filament lamp loads) A1 + 4 relays with 1 make contact, relays pre-soldered onto mounting carrier, designed for switching high inrush current loads (e.g., filament lamp loads) 13 14 A2 + 23 24 A4 + 43 N N 44 A1 + 11 14 A2 + 21 24 A4 + 41 N N Bistable relay with 1 changeover contact, relay pre-soldered onto mounting carrier 2 safety relays, Hengstler H-462 type, with 3 make contacts and 1 break contact, pluggable relays pre-installed into mounting carrier 13 A1 + 4 relays with 1 make contact each, relays pre-soldered onto mounting carrier Relay with 2 changeover contacts, with force-guided contacts, relay pre-soldered onto mounting carrier 14 A2 - A2 - 44 A1 + 12 B1 _ 14 A2 + 11 11 21 12 14 22 24 A1 + A2 - A2 - _ 12 24 34 44 A2 + _ 11 23 33 43 12 24 34 44 A1 + 11 23 33 43 31 Vibration-proof - fast - maintenance-free CAGE CLAMP(R) termination for all conductor types. solid 32 fine-stranded ferruled WAGO 789 Series switching relays serve a wide variety of applications, from basic lighting control - homes, hotels and commercial structures - to comprehensive industrial control cabinets. Just 17.5 mm wide, the compact DIN-rail mount enclosure is ideal for distribution boards and meter cabinets. Available with up to four make contacts (with or without manual operation), 789 Series relay modules are ready to suit an increasingly diverse range of applications. Relay Modules in DIN-Rail Mountable Enclosure - 789 Series 789 Series Features/Benefits: * Available with up to 2 break contacts and 2 make contacts, or 4 make contacts in a compact 17.5 mm enclosure * Commoning on each level via push-in jumpers * Marking via rail-mount terminal block accessories * Clearly identified connection points * LED indicator for switching status 33 Relay Modules in DIN-Rail Mountable Enclosure, 789 Series Description Item No. Input Nominal Voltage VN Max. Switching Voltage Max. Continuous Current 789-304 24 V DC 250 V AC/DC 12 A 789-504 789-508 24 V AC/DC 230 V AC 250 V AC/DC 12 A 789-312 789-313 789-315 24 V DC 48 V DC 110 V DC 250 V AC/DC 8A 789-512 789-515 789-516 24 V AC/DC 115 V AC 230 V AC 250 V AC/DC 8A 789-336 24 V DC 250 V AC / 30 V DC 4 A AC / 3 A DC 789-535 789-536 12 V AC/DC 24 V AC/DC 250 V AC / 30 V DC 4 A AC / 3 A DC 789-352 24 V DC 250 V AC / 30 V DC 4 A AC / 3 A DC 789-551 789-552 12 V AC/DC 24 V AC/DC 250 V AC / 30 V DC 4 A AC / 3 A DC 789-571 24 V DC 400 V AC 16 A 789-570 230 V AC 400 V AC 16 A 789-323 24 V DC 250 V AC 16 A 14 Relay with 1 changeover contact 12 A1 + A2 - A2 - 11 14 Relay with 1 changeover contact Relay with 2 changeover contacts Relay with 2 changeover contacts Relay with 2 break contacts, 2 make contacts Relay with 2 break contacts, 2 make contacts Relay with 4 make contacts 12 A1 ~ A2 ~ A2 ~ 11 14 12 24 22 A1 + A2 - A2 - 21 11 A1 ~ 14 12 24 22 A2 ~ A2 ~ 21 11 14 24 12 22 A1 + A2 - A2 - 13 23 11 21 14 24 12 22 A1 ~ A2 ~ A2 ~ 13 23 11 21 14 24 34 44 A1 + A2 - A2 - 13 23 33 43 14 24 34 44 Relay with 4 make contacts Latching relay with 1 make contact Latching relay with 1 make contact Relay with 1 make contact, Manual/0FF/Auto switch 34 A1 ~ A2 ~ A2 ~ 13 23 33 43 A1 + 14 A2 - 13 A1 ~ 14 A2 ~ 13 (+24V) A1 + A3 + A2 A2 - A 0 1 A = Automatisk 0 = OFF 1 = Manuell PA 14 13 13 35 Printed in the United States WAGO Service Worldwide Germany WAGO Kontakttechnik Minden Tel. ++49/571/887/0 Fax ++49/571/887/169 51243349 0888-0832/0000-0214 Austria WAGO Kontakttechnik Wien Tel. ++43/1/615/07/80 Fax ++43/1/615/07/75 Belgium WAGO Kontakttechnik Zaventem Tel. ++32/2/7/17/90/90 Fax ++32/2/7/17/90/99 China WAGO ELECTRONIC Co. Ltd. Tianjin Tel ++86/22/59617688 Fax ++86/22/59617668 England WAGO, Ltd. Rugby Tel. ++44/1788/568008 Fax ++44/1788/568050 France WAGO CONTACT S.A. Paris Tel. ++33/148172590 Fax ++33/148632520 Italy WAGO ELETTRONICA SRL Casalecchio di Reno (BO) Tel. ++39/051/6132112 Fax ++39/051/6272174 Japan WAGO Co. of JAPAN Ltd. Tokyo Tel. ++81/3/5627/2050 Fax ++81/3/5627/2055 Poland WAGO ELWAG sp. z o. o. Wroclaw Tel. ++48/71/3604670/78 Fax ++48/71/3604699 Singapore WAGO Electronic Pte. Ltd. Singapore Tel. ++65/62866776 Fax ++65/62842425 Switzerland WAGO CONTACT SA Domdidier Tel. ++41/26/676/75/86 Fax ++65/26/676/75/01 Mexico WAGO Corporation Queretaro Tel. 001/800/309/5975 + 52/442/221/5946 Fax + 52/442/221/5063 Canada WAGO Corporation Tel. 800/DIN Rail (346-7245) Fax 262/255-3232 WAGO Corporation N120 W19129 Freistadt Road Germantown, Wisconsin 53022 800 / DIN Rail (346-7245) Fax 262 / 255-3232 info.us@wago.com www.wago.us