Industrial Motherboards
All product specifications are subject to change without notice Last updated : 31-Aug-2010
Features
AIMB-567 Intel® Core™2 Quad Processor LGA 775
MicroATX with Dual VGA/DVI, 4 COM,
dual LAN
Intel® G41 chipset supports 800/1066/1333 MHz FSB
Dual channel DDR3 800/1066/1333 SDRAM up to 4 GB
Supports dual display, VGA and DVI-D
Supports dual core and quad core processors with 45nm processing
Supports SATA RAID 0,1,5,10 for G2 version
Supports Embedded Software APIs and Utilities
Specifications
Processor System
CPU (45 nm/65 nm) Intel Core 2 Quad Intel Core 2 Duo Intel Pentium Dual-Core Intel Celeron
Max. Speed Q9400 2.66 GHz E8500 3.16 GHz E6500 2.6 GHz E1500 2.2 GHz
L2 Cache 6 MB 6 MB 6 MB 512 KB
Chipset Intel G41+ICH7(VG), Intel G41+ICH7R(G2)
BIOS AMI 16 Mbit, SPI
Front Side Bus 800/1066/1333 MHz
Expansion Slot
PCIe x 16 (Gen2) 4.0 GB/s per direction, 1 slot
PCIe x 4 1 GB/s per direction, 1 slot (G2)
PCIe x 1 250 MB per direction, 1 slot(VG)
PCI 32-bit/33 MHz, 2 slots
Memory
Technology Dual channel DDR3 800/1066/1333 MHz
Max. Capacity 4 GB
Socket 2 x 240-pin DIMM
Graphics
Embedded Intel GMA X4500 shared 352 MB system memory
DVI Yes (If DVI is used, PCIe x 16 is automatically disabled)
Dual Display CRT+DVI
Ethernet
Interface 10/100/1000 Mbps
Controller GbE LAN1: Intel 82583V, GbE LAN2: Intel 82583V
Connector RJ-45 x 2
SATA II Max. Data Transfer Rate 300 MB/s
Channel 4
EIDE Mode ATA 100/66/33
Channel 1 (max. 2 devices)
I/O Interface
VGA 1
USB 8
Audio 2 (Line-out, Mic-in)
Serial 4 (3 of RS-232, 1 of RS-232-422/485 support auto flow control)
Parallel 1 (on board pin header)
FDD -
PS/2 2 (1 x keyboard and 1 x mouse)
GPIO 8-bit GPIO
Watchdog Timer Output System reset
Interval Programmable 1 ~ 255 sec/min
Power Requirement
Power On Intel Core 2 Quad Q9400 2.66 GHz FSB 1333 MHz, 4 GB DDR3 1066 SDRAM
3.3 V 5 V 12 V 5 Vsb -12 V
0.19 A 2.98 A 3.48 A 0.18 A 0.18 A
Environment
Operating Non-Operating
Temperature 0 ~ 60° C (32 ~ 140° F), depends on CPU
speed and cooler solution -20 ~ 70° C (-4 ~ 158° F)
Physical Characteristics Dimensions (W x D) 244 x 244 mm (9.6" x 9.6")
WatchdogGPIO
H/W MonitorSMBus
Monitoring
BIOS flash
Utilities:
Software APIs:
www.advantech.com/products
Online Download
Board Diagram
Packing List
Description Quantity
IDE HDD cable x 1
Serial ATA HDD data cable x 2
Serial ATA HDD power cable x 2
COM port cable kit x 2
I/O port bracket x 1
Startup manual x 1
Utility CD x 1
Accessories
Part Number Description
1750000334 LGA775 CPU cooler (115 W)
1960022033T100 LGA775 CPU cooler for 2U chassis
1700008461 USB cable with four ports, 30.5 cm
1700002204 USB cable with dual ports, 27 cm
1700003195 USB cable with dual ports, 17.5 cm
Intel G41
GMCH
CRT
DVI-D
Core 2 Quad/Core 2 Duo/
Pentium DC processor
ICH7/7R
SDVO
GbE-LAN1: Intel 82583V
800/1066/1333
MHz FSB
Direct Media IIterface
2GB/s bandwidth
PCIe x 1 (ICH7)
PCIe x 4 (ICH7R)
Edge Connector
1 ATA 100 Ports
4 SATA2 Ports
8 USB Ports
Audio Codec
ALC-888
300MB/s
ATA 33/66/100
USB 2.0/1.1
Intel HD Audio
Channel A
Channel B
DDR3 800/1066/1333
DDR3 800/1066/1333
PCIe x 1
GbE-LAN2: Intel 82583V
PCIe x 1
1 x PCIe x 1(ICH7)
4 x PCIe x 1(ICH7R)
32bit/33MHz PCI Bus
PCI1~2
Edge Connector
Fintek
81216AD
Super IO
Winbond
W83627DHG-P
2 RS-232, WDT, LPT1 RS232, 1 RS-232/422/485
BIOS
LPC Bus
AIMB-567G2-00A1E
AIMB-567
Ordering Information
Part Number Chipset Display GbE SW
RAID
PCIe
x 4
PCIe
x 1
AIMB-567G2-00A1E G41/ICH7R VGA/DVI 2 Yes 1 -
AIMB-562VG-00A1E G41/ICH7 VGA 1 No - 1
Riser Card
Part Number Description
AIMB-RP3PF-21A1E 2U riser card with 1 PCIe x 16 & 2 PCI slot expansion
AIMB-RP30P-03A1E 2U riser card for 3 PCI expansion
AIMB-RP10P-01A1E 1U riser card for 1 PCI expansion
Bracket View
Industrial Motherboards
All product specifications are subject to change without notice Last updated : 31-Aug-2010
Software APIs
Control Monitor
GPIO
General Purpose Input/Output allows users to monitor the level
of signal input or set the output status to switch on/off a device.
Our API also provides Programmable GPIO, which allows
developers to dynamically set the GPIO input or output status. Watchdog
A watchdog timer (WDT) performs a reset after a certain period of
time if something goes wrong and the system does not recover
on its own. The watchdog timer can be programmed to perform
a warm boot (restarting the system) after a certain number of
seconds.
SMBus
The SMBus API allows a developer to interface a embedded
system environment and transfer serial messages using the
SMBus protocols, allowing multiple simultaneous device
control. Hardware
Monitor
The Hardware Monitor (HWM) API is a system health
supervision API that inspects certain condition indexes, such as
fan speed, temperature and voltage.
I2C
The I2C API allows a developer to interface with an embedded
system environment and transfer serial messages using the I2C
protocols, allowing multiple simultaneous device control. Hardware
Control
The Hardware Control API allows developers to set the PWM
(Pulse Width Modulation) value to adjust fan speed or other
devices; it can also be used to adjust the LCD brightness.
Display Power Saving
Brightness
Control
The Brightness Control API allows a developer to interface
with an embedded device to control brightness depending on
ambient light conditions.
CPU Speed
Make use of Intel SpeedStep technology to reduce power power
consumption. The system will automatically adjust the CPU
Speed depending on system loading.
Backlight
The Backlight API allows a developer to control the backlight
(screen) on/off in an embedded device depending on usage.
System
Throttling
Refers to a series of methods for reducing power consumption in
computers by lowering the clock frequency. These APIs allow the
user to lower the clock from 87.5% to 12.5%.
Software Utilities
BIOS Flash
The BIOS Flash utility allows customers to update the flash
ROM BIOS version, or use it to back up current BIOS by
copying it from the flash chip to a file on customers’ disk. The
BIOS Flash utility also provides a command line version and
API for fast implementation into customized applications. eSOS
The eSOS utility is a small OS stored in BIOS ROM. It will boot
up in case of a main OS crash. It will diagnose the hardware
status, and then send an e-mail to a designated administrator.
The eSOS also provides remote connection: Telnet server and
FTP server, allowing the administrator to rescue the system.
Embedded
Security ID
The embedded application is the most important property of
a system integrator. It contains valuable intellectual property,
design knowledge and innovation, but it is easily copied! The
Embedded Security ID utility provides reliable security functions
for customers to secure their application data within embedded
BIOS. Flash Lock
Flash Lock is a mechanism that binds the board and CF card
(SQFlash) together. The user can “Lock” SQFlash via the Flash
Lock function and “Unlock” it via BIOS while booting. A locked
SQFlash cannot be read by any card reader or boot from other
platforms without a BIOS with the “Unlock” feature.
Monitoring
The Monitoring utility allows the customer to monitor system
health, including voltage, CPU and system temperature and fan
speed. These items are important to a device; if critical errors
happen and are not solved immediately, permanent damage may
be caused.
Value-Added Software Services
Software API: An interface that defines the ways by which an application program may request services from libraries and/or operating systems. Provides not only the underlying
drivers required but also a rich set of user-friendly, intelligent and integrated interfaces, which speeds development, enhances security and offers add-on value for Advantech platforms.
It plays the role of catalyst between developer and solution, and makes Advantech embedded platforms easier and simpler to adopt and operate with customer applications.
