CGA-6618Z CGA-6618Z Dual CATV 1MHz to 1000MHz High Linearity GaAs HBT Amplifier DUAL CATV 1MHz to 1000MHz HIGH LINEARITY GaAs HBT AMPLIFIER Package: ESOP-8 Product Description Features RFMD's CGA-6681Z is a high performance GaAs HBT MMIC Amplifier. Designed with the InGaP process technology for excellent reliability. A Darlington configuration is utilized for broadband performance. The heterojunction increases breakdown voltage and minimizes leakage current between junctions. The CGA-6618Z contains two amplifiers for use in wideband Push-Pull CATV amplifiers requiring excellent second orfer performance. The second or third order non-linearities are greatly improved in the push pull configuration. Optimum Technology Matching(R) Applied Amplifier Configuration GaAs HBT GaAs MESFET InGaP HBT SiGe BiCMOS Si BiCMOS 1 8 2 7 3 6 4 5 Lead-Free, RoHS Compliant, and Green Packaging Excellent CSO/CTB/XMOD Performance at +34dBmV Output Power Per Tone Dual Devices in Each SOIC-8 Package Simplify Push-Pull Configuration PC Board Layout ESOP-8 Package Applications CATV Head End Driver and Predriver Amplifier CATV Line Driver Amplifier SiGe HBT GaAs pHEMT Si CMOS Si BJT GaN HEMT InP HBT Parameter Min. Small Signal Gain 12.4 12.0 OIP2, Tone Spacing=1MHz, POUTper tone-+6dBm 70.0 OIP3, Tone Spacing=1MHz, POUTper tone-+6dBm 38.0 Output Power at 1dB Compression 19.5 Input Return Loss Specification Typ. 13.8 14.1 13.4 13.0 76.5 Condition 50MHz 500MHz 870MHz 1000MHz 50MHz 77.5 72.0 38.0 dBm dBm dBm 250MHz 500MHz 50MHz 39.0 40.0 20.0 21.0 21.5 15.5 dBm dBm dBm dBm dBm dB dBm dB dB dB 500MHz 870MHz 50MHz 500MHz 870MHz 500MHz 100 - 870MHz 500MHz 100 - 870MHz 50MHz 12.5 9.0 Noise Figure - Balun Insertion Loss Included Unit dB dB dB dB dBm 10 Output Return Loss Max. 5.3 14.4 14.0 5.4 dB 500MHz 5.6 6.6 dB 870MHz Test Conditions: VS =8V, ID =160mA Typ., RBIAS =33, TL =25C, ZS =ZL =75, Push Pull Application Circuit RF MICRO DEVICES(R), RFMD(R), Optimum Technology Matching(R), Enabling Wireless ConnectivityTM, PowerStar(R), POLARISTM TOTAL RADIOTM and UltimateBlueTM are trademarks of RFMD, LLC. BLUETOOTH is a trademark owned by Bluetooth SIG, Inc., U.S.A. and licensed for use by RFMD. All other trade names, trademarks and registered trademarks are the property of their respective owners. (c)2006, RF Micro Devices, Inc. DS100812 7628 Thorndike Road, Greensboro, NC 27409-9421 * For sales or technical support, contact RFMD at (+1) 336-678-5570 or sales-support@rfmd.com. 1 of 10 CGA-6618Z Absolute Maximum Ratings Parameter Rating Unit Max Device Current (ID) 240 mA Max Device Voltage (VD) 7 V Max RF Input Power +20 dBm Max Junction Temp (TJ) +150 C -40 to +85 C Max Storage Temp +150 C Min Storage Temp -65 Operating Temp Range (TL) Caution! ESD sensitive device. Exceeding any one or a combination of the Absolute Maximum Rating conditions may cause permanent damage to the device. Extended application of Absolute Maximum Rating conditions to the device may reduce device reliability. Specified typical performance or functional operation of the device under Absolute Maximum Rating conditions is not implied. RoHS status based on EUDirective2002/95/EC (at time of this document revision). The information in this publication is believed to be accurate and reliable. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents, or other rights of third parties, resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended application circuitry and specifications at any time without prior notice. Operation of this device beyond any one of these limits may cause permanent damage. For reliable continuous operation, the device voltage and current must not exceed the maximum operating values specified in the table on page one. Bias Conditions should also satisfy the following expression: IDVD <(TJ -TL)/RTH, j-l and TL =TLEAD Parameter Specification Typ. Min. Unit Max. Condition Worst Case Over Band, CSO 81 dBc 79 Ch., Flat, +34dBmV Worst Case Over Band, CTB 70 dBc 79 Ch., Flat, +34dBmV Worst Case Over Band, XMOD 63 dBc 79 Ch., Flat, +34dBmV Device Operating Voltage 4.8 5.1 5.4 V Device Operating Current 144 160 176 mA Thermal Resistance 35 C/W (Junction to Lead) Test Conditions: VS =8V, ID =160mA Typ., RBIAS =33, TL =25C, ZS =ZL =75, Push Pull Application Circuit Typical RF Performance: VS=8V, ID=160mA @ TL=+25C, RBIAS=33 Ohms, Push-Pull Config. Gain vs. Frequency 18 17 -40C +25C 16 Gain (dB) +85C 15 14 13 12 11 10 0 100 200 300 400 500 600 700 800 900 1000 Frequency (MHz) |S11| (dB) vs. Frequency |S22| (dB) vs. Frequency 0 0 -2 -40C +25C -4 +25C -6 +85C -6 +85C -8 -10 -12 -8 -10 -12 -14 -14 -16 -16 -18 -18 -20 -20 0 100 200 300 400 500 600 Frequency (MHz) 2 of 10 -40C -4 |S22| (dB) |S11| (dB) -2 700 800 900 1000 0 100 200 300 400 500 600 700 800 900 1000 Frequency (MHz) 7628 Thorndike Road, Greensboro, NC 27409-9421 * For sales or technical support, contact RFMD at (+1) 336-678-5570 or sales-support@rfmd.com. DS100812 CGA-6618Z Typical RF Performance: VS=8V, ID=160mA @ TL=+25C, RBIAS=33 Ohms, Push-Pull Config. Second Order Intercept Point vs. Frequency over Temperature Third Order Intercept Point vs. Frequency over Temperature 90 50 85 45 80 IP2 (dBm) IP3 (dBm) 40 35 75 70 -40C 30 +25C -40C 65 +85C 25 +25C +85C 60 20 0 100 200 300 400 500 600 700 800 900 0 1000 50 100 150 200 Second Harmonic vs. Pout and Freq. Data shown is typical at 25C 300 350 400 450 500 550 Third Harmonic vs. Pout and Freq. Data shown is typical at 25C 100 100 90 90 80 80 IM3 (dBc) IM2 (dBc) 250 Freq. (MHz) Freq. (MHz) 70 66MHz 60 70 66MHz 60 100MHz 100MHz 250MHz 50 250MHz 50 500MHz 500MHz 40 40 0 1 2 3 4 5 0 6 1 2 3 4 5 6 Pout (dBm) Pout (dBm) Noise Figure vs. Frequency Over Temperature CTB/CSO/XMOD 34dBmV/Chan., Flat 8.0 100 7.0 90 6.0 80 dBc NF(dB) 5.0 4.0 3.0 60 -40C 2.0 70 +25C 50 +85 1.0 Xmod CTB CSO+ CSO- 40 0.0 0 100 200 300 400 500 600 Freq. (MHz) DS100812 700 800 900 1000 0 50 100 150 200 250 300 350 400 450 500 550 600 Freq. (MHz) 7628 Thorndike Road, Greensboro, NC 27409-9421 * For sales or technical support, contact RFMD at (+1) 336-678-5570 or sales-support@rfmd.com. 3 of 10 CGA-6618Z CSO/CTB/XMOD Performance: VS=8V, ID=150mA @ TL=+25C, RBIAS=39 Ohms, Push-Pull Config, 79 Ch. Flat Analog, No Digital Channels. Push-Pull CGA-6618 CTB vs. Pout and Freq. Push-Pull CGA-6618 XMOD vs. Pout and Freq. 100 100 90 32dBmV 34dBmV 36dBmV 38dBmV 40dBmV 42dBmV 90 70 60 50 50 42dBmV 40 0 100 200 300 400 500 600 0 Frequency (MHz) 100 200 300 400 500 600 Frequency (MHz) Push-Pull CGA-6618 CSO- vs. Pout and Freq. Push-Pull CGA-6618 CSO+ vs. Pout and Freq. 100 100 90 90 80 80 dBc dBc 38dBmV 40dBmV 70 60 40 70 60 70 60 50 32dBmV 34dBmV 36dBmV 38dBmV 40dBmV 42dBmV 50 40 32dBmV 34dBmV 36dBmV 38dBmV 40dBmV 42dBmV 40 0 100 200 300 Frequency (MHz) 4 of 10 34dBmV 36dBmV 80 dBc dBc 80 32dBmV 400 500 600 0 100 200 300 400 500 600 Frequency (MHz) 7628 Thorndike Road, Greensboro, NC 27409-9421 * For sales or technical support, contact RFMD at (+1) 336-678-5570 or sales-support@rfmd.com. DS100812 CGA-6618Z Typical RF Performance - Single Ended - 50 Ohm System VS=8V, ID=80mA (one amp biased), TL=+25C, RBIAS=33 Ohms Gain & Isolation vs. Frequency 18 0 16 -4 14 -8 12 -12 10 -16 8 -20 6 -24 |S11| & |S22| vs. Frequency 0 -5 4 dB -15 -30 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 |S22| -40 -36 0 |S11| -35 -32 Isolation (dB) -20 -25 -28 Gain (dB) 2 Isolation (dB) Gain (dB) -10 0.0 0.5 1.0 4.0 1.5 2.0 2.5 3.0 3.5 4.0 Frequency (GHz) Frequency (GHz) Typical RF Performance - Single Ended - 37.5 Ohm System VS=8V, ID=80mA (one amp biased), TL=+25C, RBIAS=33 Ohms |S11| & |S22| vs. Frequency 0 0 16 -4 -5 14 -8 -10 12 -12 10 -16 8 -20 6 -24 4 -32 Isolation (dB) 0 -36 0.0 0.5 1.0 1.5 2.0 2.5 Frequency (GHz) DS100812 dB -15 -20 -25 -30 |S11| -35 |S22| -28 Gain (dB) 2 Isolation (dB) Gain (dB) Gain & Isolation vs. Frequency 18 3.0 3.5 4.0 -40 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 Frequency (GHz) 7628 Thorndike Road, Greensboro, NC 27409-9421 * For sales or technical support, contact RFMD at (+1) 336-678-5570 or sales-support@rfmd.com. 5 of 10 CGA-6618Z 50MHz to 870MHz Application Circuit Schematic Vs RBias 1 F Tant. 68 pF 0.01 F 1000 pF 220 nH CGA-6618Z 1000 pF Macom ETC1-1-13 RF IN 1000 pF 1 8 2 7 3 6 4 5 1000 pF Macom ETC1-1-13 RF OUT 1000 pF 220 nH 1 F Tant. 0.01 F 1000 pF 68 pF RBias Vs 50MHz to 870MHz Evaluation Board Layout Rbias 1uF Tant. RF INPUT RF OUTPUT .01uF 1000pF 68pF Balun ETC1-1-13 220nH Balun ETC1-1-13 1000pF 1000pF 1000pF 220nH 1000pF 68pF 1000pF .01uF 1uF Tant. ECB-101611 Rev A ESOP-8 Push-Pull Eval Board Rbias 6 of 10 7628 Thorndike Road, Greensboro, NC 27409-9421 * For sales or technical support, contact RFMD at (+1) 336-678-5570 or sales-support@rfmd.com. DS100812 CGA-6618Z 5MHz to 100MHz Application Circuit Schematic Vs RBias 68 pF 0.01 F 1000 pF 1 F Tant. 10 H CGA-6618Z 0.01 F Macom ETC1-1T RF IN 0.01 F 1 8 2 7 3 6 4 5 Macom ETC1-1T 0.01 F RF OUT 0.01 F 10 H 1 F Tant. 0.01 F 1000 pF 68 pF RBias Vs 5MHz to 100MHz Evaluation Board Layout Rbias 1uF Tant. RF INPUT RF OUTPUT .01uF 1000pF 68pF 10uH Balun ETC1-1T 0.01uF 0.01uF 10uH 0.01uF Balun ETC1-1T 0.01uF 68pF 1000pF .01uF 1uF Tant. ECB-101611 Rev A ESOP-8 Push-Pull Eval Board Rbias DS100812 7628 Thorndike Road, Greensboro, NC 27409-9421 * For sales or technical support, contact RFMD at (+1) 336-678-5570 or sales-support@rfmd.com. 7 of 10 CGA-6618Z R ecommended B ias R esistor Values for ID=150mA R BIAS=2 ( VS-VD ) / ID Supply Voltage(VS) 8V RBIAS 9V 33 12 V 47 82 15 V 120 Note: RBIAS provi des D C bi as stabi li ty over temperature. 5 - 100 MHz Application Circuit: VS=8V, ID=160mA @ TL=+25C, Push-Pull Config. G ain v s . F re q u e n cy R etu rn Loss vs. Freq uency 0 16 -5 |S 11 | and |S 22 | (dB) |S 21 | (dB) 14 12 10 8 |S 22 | -10 -15 |S 11 | -20 -25 -30 6 0 10 20 30 40 50 60 70 80 90 0 1 00 10 20 30 40 50 60 70 80 90 100 F requency (M Hz) F requency (M Hz) P1dB and IP3 vs. Frequency Noise Figure vs. Frequency 22 40 21 39 20 38 8 7 37 18 36 5 NF (dB) 19 IP3 (dBm) P1dB (dBm) 6 4 3 2 P1dB 17 35 1 IP3 16 34 0 10 20 30 40 50 60 70 Frequency (MHz) 8 of 10 80 90 100 110 0 0 10 20 30 40 50 60 70 80 90 100 110 Frequency (MHz) 7628 Thorndike Road, Greensboro, NC 27409-9421 * For sales or technical support, contact RFMD at (+1) 336-678-5570 or sales-support@rfmd.com. DS100812 CGA-6618Z Pin 1 2, 3, 6, 7 4 5 Function RF IN GND Description RF IN RF OUT/VCC 8 EPAD RF OUT/VCC GND Device 1. RF input pin. This pin requires the use of an external DC-blocking capacitor as shown in the schematic. Connection to ground. Use via holes for best performance to reduce lead inductance as close to ground leads as possible. Device 2. RF input pin. This pin requires the use of an external DC-blocking capacitor as shown in the schematic. Device 2. RF output and bias pin. Bias should be supplied to this pin through an external series resistor and RF choke inductor. Because DC biasing is present on this pin, a DC-blocking capacitor should be used in most applications. The supply side of the bias network should be well bypassed. Device 1. Same as pin 5. Exposed area on the bottom side of the package must be soldered to the ground plane of the board for optimum thermal and RF performance. Several vias should be located under the EPAD as shown in the recommended land pattern. Suggested Pad Layout PCB Pad Layout Dimensions in inches [millimeters] Sized for 31 mil thick FR-4 Package Drawing and Marking Dimensions in inches (millimeters) Refer to drawing posted at www.rfmd.com for tolerances. TOP VIEW 8 7 PACKAGE TYPE: ESOP-8 BOTTOM VIEW 6 5 Lot Code CGA6618 .155 [3.937] .112 [2.85] .236 [5.994] .088 [2.25] EXPOSED PAD 1 2 3 4 .061 [1.549] .194 [4.93] .050 [1.27] .016 [.406] .061 [1.549] .058 [1.473] .008 .008 [.203] .194 [4.928] .003 [.076] SIDE VIEW DS100812 DETAIL A .013 [.33] x 45 PARTING LINE .155 [3.937] SEATING PLANE SEE DETAIL A END VIEW .025 5 7628 Thorndike Road, Greensboro, NC 27409-9421 * For sales or technical support, contact RFMD at (+1) 336-678-5570 or sales-support@rfmd.com. 9 of 10 CGA-6618Z Part Identification CGA-6618Z Ordering Information 10 of 10 Part Number Description Reel Size Devices/Reel CGA6618ZSB 5pcs Sample Bag N/A N/A CGA6618ZSQ 25pcs Sample Bag N/A N/A CGA6618ZSR Dual CATV Broadband HBT Amp 7" 100pcs CGA6618Z Dual CATV Broadband HBT Amp 7" 500pcs CGA6618ZPCK-410 50MHz to 870MHz Eval Bd N/A N/A CGA6618ZPCK-411 5MHz to 100MHz Eval Bd N/A N/A 7628 Thorndike Road, Greensboro, NC 27409-9421 * For sales or technical support, contact RFMD at (+1) 336-678-5570 or sales-support@rfmd.com. DS100812