© Semiconductor Components Industries, LLC, 2009
January, 2009 Rev. 8
1Publication Order Number:
MC33078/D
MC33078, MC33079
Low Noise Dual/Quad
Operational Amplifiers
The MC33078/9 series is a family of high quality monolithic
amplifiers employing Bipolar technology with innovative high
performance concepts for quality audio and data signal processing
applications. This family incorporates the use of high frequency PNP
input transistors to produce amplifiers exhibiting low input voltage
noise with high gain bandwidth product and slew rate. The all NPN
output stage exhibits no deadband crossover distortion, large output
voltage swing, excellent phase and gain margins, low open loop high
frequency output impedance and symmetrical source and sink AC
frequency performance.
The MC33078/9 family offers both dual and quad amplifier
versions and is available in the plastic DIP and SOIC packages (P and
D suffixes).
Features
Dual Supply Operation: $5.0 V to $18 V
Low Voltage Noise: 4.5 nV/ Hz
Ǹ
Low Input Offset Voltage: 0.15 mV
Low T.C. of Input Offset Voltage: 2.0 mV/°C
Low Total Harmonic Distortion: 0.002%
High Gain Bandwidth Product: 16 MHz
High Slew Rate: 7.0 V/ms
High Open Loop AC Gain: 800 @ 20 kHz
Excellent Frequency Stability
Large Output Voltage Swing: +14.1 V/ 14.6 V
ESD Diodes Provided on the Inputs
PbFree Packages are Available
Figure 1. Representative Schematic Diagram
(Each Amplifier)
VCC
D1
Q4 Q9
Q3 Q5
Pos
D3
C2 R7 Q11
Neg
R2
Q8 D4 C3 R9
Q10
Q2 D2
Q6
R4
Q7
R5
R6
Q12
R3
C1
R1
Q1
Z1
J1 Amplifier
Biasing
VEE
Q3
Vout
http://onsemi.com
MARKING
DIAGRAMS
SOIC14
D SUFFIX
CASE 751A
14
1
MC33079DG
AWLYWW
1
14
14
1
PDIP14
P SUFFIX
CASE 646
MC33079P
AWLYYWWG
1
14
PDIP8
P SUFFIX
CASE 626
1
8
SOIC8
D SUFFIX
CASE 751
1
8
DUAL
QUAD
1
8
MC33078P
AWL
YYWWG
33078
ALYW
G
1
8
See detailed ordering and shipping information in the package
dimensions section on page 10 of this data sheet.
ORDERING INFORMATION
A = Assembly Location
WL, L = Wafer Lot
YY, Y = Year
WW, W = Work Week
G or G= PbFree Package
MC33078, MC33079
http://onsemi.com
2
PIN CONNECTIONS
CASE 626/751
DUAL
(Dual, Top View)
4
VEE
1
2
3
5
6
7
8VCC
Output 2
Inputs 2
Inputs 1
-
+1
-
+
2
Output 1
CASE 646/751A
QUAD
)
*
)
*
*
)
*
)
(Quad, Top View)
1
2
3
4
5
6
7
14
8
9
10
11
12
13
Output 1
VCC
Output 4
Inputs 4
Output 2
VEE
Inputs 3
Output 3
14
23
Inputs 1
Inputs 2
MAXIMUM RATINGS
Rating Symbol Value Unit
Supply Voltage (VCC to VEE) VS+36 V
Input Differential Voltage Range VIDR Note 1 V
Input Voltage Range VIR Note 1 V
Output Short Circuit Duration (Note 2) tSC Indefinite sec
Maximum Junction Temperature TJ+150 °C
Storage Temperature Tstg 60 to +150 °C
ESD Protection at any Pin
MC33078 Human Body Model
Machine Model
MC33079 Human Body Model
Machine Model
Vesd 600
200
550
150
V
Maximum Power Dissipation PDNote 2 mW
Operating Temperature Range TA40 to +85 °C
Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the
Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect
device reliability.
1. Either or both input voltages must not exceed the magnitude of VCC or VEE.
2. Power dissipation must be considered to ensure maximum junction temperature (TJ) is not exceeded (see Figure 2).
MC33078, MC33079
http://onsemi.com
3
DC ELECTRICAL CHARACTERISTICS (VCC = +15 V, VEE = 15 V, TA = 25°C, unless otherwise noted.)
Characteristics Symbol Min Typ Max Unit
Input Offset Voltage (RS = 10 W, VCM = 0 V, VO = 0 V)
(MC33078) TA = +25°C
TA = 40° to +85°C
(MC33079) TA = +25°C
TA = 40° to +85°C
|VIO|
0.15
0.15
2.0
3.0
2.5
3.5
mV
Average Temperature Coefficient of Input Offset Voltage
RS = 10 W, VCM = 0 V, VO = 0 V, TA = Tlow to Thigh
DVIO/DT2.0 mV/°C
Input Bias Current (VCM = 0 V, VO = 0 V)
TA = +25°C
TA = 40° to +85°C
IIB
300
750
800
nA
Input Offset Current (VCM = 0 V, VO = 0 V)
TA = +25°C
TA = 40° to +85°C
IIO
25
150
175
nA
Common Mode Input Voltage Range (DVIO = 5.0 mV, VO = 0 V) VICR ±13 ±14 V
Large Signal Voltage Gain (VO = $10 V, RL = 2.0 kW)
TA = +25°C
TA = 40° to +85°C
AVOL
90
85
110
dB
Output Voltage Swing (VID = $1.0V)
RL = 600 W
RL = 600 W
RL = 2.0 kW
RL = 2.0 kW
RL = 10 kW
RL = 10 kW
VO+
VO
VO+
VO
VO+
VO
+13.2
+13.5
+10.7
11.9
+13.8
13.7
+14.1
14.6
13.2
14
V
Common Mode Rejection (Vin = ±13V) CMR 80 100 dB
Power Supply Rejection (Note 3)
VCC/VEE = +15 V/ 15 V to +5.0 V/ 5.0 V
PSR 80 105 dB
Output Short Circuit Current (VID = 1.0 V, Output to Ground)
Source
Sink
ISC
+15
20
+29
37
mA
Power Supply Current (VO = 0 V, All Amplifiers)
(MC33078) TA = +25°C
(MC33078) TA = 40° to +85°C
(MC33079) TA = +25°C
(MC33079) TA = 40° to +85°C
ID
4.1
8.4
5.0
5.5
10
11
mA
3. Measured with VCC and VEE differentially varied simultaneously.
MC33078, MC33079
http://onsemi.com
4
AC ELECTRICAL CHARACTERISTICS (VCC = +15 V, VEE = 15 V, TA = 25°C, unless otherwise noted.)
Characteristics Symbol Min Typ Max Unit
Slew Rate (Vin = 10 V to +10 V, RL = 2.0 kW, CL = 100 pF AV = +1.0) SR 5.0 7.0 V/ms
Gain Bandwidth Product (f = 100 kHz) GBW 10 16 MHz
Unity Gain Bandwidth (Open Loop) BW 9.0 MHz
Gain Margin (RL = 2.0 kW)
CL = 0 pF
CL = 100 pF
Am
11
6.0
dB
Phase Margin (RL = 2.0 kW)
CL = 0 pF
CL = 100 pF
fm
55
40
Deg
Channel Separation (f = 20 Hz to 20 kHz) CS 120 dB
Power Bandwidth (VO = 27 Vpp, RL = 2.0 kW, THD $ 1.0%) BWp120 kHz
Total Harmonic Distortion
(RL = 2.0 kW, f = 20 Hz to 20 kHz, VO = 3.0 Vrms, AV = +1.0)
THD 0.002 %
Open Loop Output Impedance (VO = 0 V, f = 9.0 MHz) |ZO|37 W
Differential Input Resistance (VCM = 0 V) Rin 175 kW
Differential Input Capacitance (VCM = 0 V) Cin 12 pF
Equivalent Input Noise Voltage (RS = 100 W, f = 1.0 kHz) en4.5 nV/ Hz
Equivalent Input Noise Current (f = 1.0 kHz) in0.5 pA/Hz
VCM = 0 V
TA = 25°C
Figure 2. Maximum Power Dissipation
versus Temperature
Figure 3. Input Bias Current versus
Supply Voltage
Figure 4. Input Bias Current versus Temperature Figure 5. Input Offset Voltage versus Temperature
P, MAXIMUM POWER DISSIPATION (mW)
D
-20 0 20 40 60 80 100 120 140 160
TA, AMBIENT TEMPERATURE (°C)
-55 -40
MC33078P & MC33079P
MC33079D
MC33078D
0101520
VCC, | VEE |, SUPPLY VOLTAGE (V)
I, INPUT BIAS CURRENT (nA)
IB
TA, AMBIENT TEMPERATURE (°C)
0 25 50 75 100 125-55 -25
VCC = +15 V
VEE = -15 V
VCM = 0 V
V, INPUT OFFSET VOLTAGE (mV)
IO
TA, AMBIENT TEMPERATURE (°C)
-55 -25 0 25 50 75 100 125
Unit 1
Unit 2
Unit 3
VCC = +15 V
VEE = -15 V
RS = 10 W
VCM = 0 V
AV = +1
I, INPUT BIAS CURRENT (nA)
IB
2400
2000
1600
1200
800
400
0
800
600
400
200
0
1000
800
600
400
200
0
2.0
1.0
0
-1.0
-2.0
5.0
MC33078, MC33079
http://onsemi.com
5
Sink
Source
VCC = +15 V
VEE = -15 V
RL < 100 W
VID = 1.0 V
-55°C
25°C
VCC = +15 V
VEE = -15 V
125°C
-55°C
125°C
25°C
Figure 6. Input Bias Current versus
Common Mode Voltage
Figure 7. Input Common Mode Voltage
Range versus Temperature
Figure 8. Output Saturation Voltage versus
Load Resistance to Ground
Figure 9. Output Short Circuit Current
versus Temperature
Figure 10. Supply Current versus
Temperature
Figure 11. Common Mode Rejection
versus Frequency
I, INPUT BIAS CURRENT (nA)
IB
-15 -10 -5.0 0 5.0 10 15
VCM, COMMON MODE VOLTAGE (V)
VCC = +15 V
VEE = -15 V
TA = 25°C
VICR
Voltage
Range
-VCM
-55 -25 0 25 50 75 100 125
TA, AMBIENT TEMPERATURE (°C)
+VCM VCC = +3.0 V to +15 V
VEE = -3.0 V to -15 V
DVIO = 5.0 mV
VO = 0 V
| I|, OUTPUT SHORT CIRCUIT CURRENT (mA)
SC
TA, AMBIENT TEMPERATURE (°C)
-55 -25 0 25 50 75 100 125
I, SUPPLY CURRENT (mA)
CC
TA, AMBIENT TEMPERATURE (°C)
-55 -25 0 25 50 75 100 125
±10 V
±15 V
±15 V
±10 V
±5.0 V
±5.0 V
VCM = 0 V
RL =
VO = 0 V
MC33078
MC33079
Supply Voltages
CMR, COMMON MODE REJECTION (dB)
100 1.0 k 10 k 100 k 1.0 M 10 M
f, FREQUENCY (Hz)
VCC = +15 V
VEE = -15 V
VCM = 0 V
DVCM = ±1.5 V
TA = 25°C
, OUTPUT SATURATION VOLTAGE (V)
sat
RL, LOAD RESISTANCE TO GROUND (kW)
0 1.0 2.0 3.0 4.0
, INPUT COMMON MODE VOLTAGE RANGE (V)
V
600
500
400
300
200
100
0
VCC -0
VCC -0.5
VCC -1.0
VCC -1.5
VEE +1.5
VEE +1.0
VEE +0.5
VEE +0
50
30
20
10
40
10
8.0
6.0
4.0
2.0
0
160
140
120
100
80
60
40
20
VCC -1.0
VCC -3.0
VCC -5.0
VEE +5.0
VEE +3.0
VEE +1.0
CMR = 20Log
-
+
D VCM ADM
D VCM
D VO
× ADM
D VO
9.0
7.0
5.0
3.0
1.0
±4.0 V
MC33078, MC33079
http://onsemi.com
6
VO, OUTPUT VOLTAGE (V )
pp
RL = 2.0 kW
f 10 Hz
DVO = 2/3 (VCC -VEE)
TA = 25°C
RL = 10 kW
CL = 0 pF
f = 100 kHz
TA = 25°C
Figure 12. Power Supply Rejection
versus Frequency
Figure 13. Gain Bandwidth Product
versus Supply Voltage
Figure 14. Gain Bandwidth Product
versus Temperature
Figure 15. Maximum Output Voltage
versus Supply Voltage
Figure 16. Output Voltage versus Frequency Figure 17. Open Loop Voltage Gain
versus Supply Voltage
f, FREQUENCY (Hz)
P
S
R, P
O
WER
S
UPPLY REJE
C
TI
O
N (dB)
100 1.0 k 10 k 100 k 1.0 M 10 M
+PSR
-PSR
VCC = +15 V
VEE = -15 V
TA = 25°C
VCC |VEE| , SUPPLY VOLTAGE (V)
GWB, GAIN BANDWIDTH PRODUCT (MHz)
0101520
TA, AMBIENT TEMPERATURE (°C)
G
WB,
G
AIN BANDWIDTH PR
O
DU
C
T (MHz)
-55 -25 0 50 75 10025 125
VCC = +15 V
VEE = -15 V
f = 100 kHz
RL = 10 kW
CL = 0 pF
VCC |VEE| , SUPPLY VOLTAGE (V)
V , OUTPUT VOLTAGE (Vp)
O
0101520
VO -
VO +
TA = 25°C
RL = 10 kW
RL = 10 kW
RL = 2.0 kW
RL = 2.0 kW
f, FREQUENCY (Hz)
10 100 1.0 k 10 k 100 k 1.0 M 10 M
VCC = +15 V
VCC = -15 V
RL = 2.0 kW
AV = +1.0
THD 1.0%
TA = 25°C
VCC |VEE| , SUPPLY VOLTAGE (V)
VOL
A, OPEN LOOP VOLTAGE GAIN (dB)
0101520
140
120
100
80
60
40
20
0
30
20
10
0
20
15
10
5.0
0
20
15
10
5.0
0
-5.0
-10
-15
-20
35
30
25
20
15
10
5.0
0
110
100
90
80
+PSR = 20Log DVO/ADM
DVCC
ADM
-
+DVO
VEE
-PSR = 20Log DVO/ADM
DVCC
DVCC
5.0
5.0
5.0
MC33078, MC33079
http://onsemi.com
7
VOL
A, OPEN LOOP VOLTAGE GAIN (dB)
Figure 18. Open Loop Voltage Gain
versus Temperature
Figure 19. Output Impedance
versus Frequency
Figure 20. Channel Separation
versus Frequency
Figure 21. Total Harmonic Distortion
versus Frequency
Figure 22. Total Harmonic Distortion
versus Output Voltage
Figure 23. Slew Rate versus Supply Voltage
TA, AMBIENT TEMPERATURE (°C)
-55 -25 0 25 50 75 100 125
VCC = +15 V
VEE = -15 V
RL = 2.0 kW
f 10 Hz
DVO = -10 V to +10 V
f, FREQUENCY (Hz)
| Z|, OUTPUT IMPEDANCE ()Ω
1.0 k 10 k 100 k 1.0 M 10 M
O
VCC = +15 V
VEE = -15 V
VO = 0 V
TA = 25°C
AV = 1000 AV = 100 AV = 10 AV = 1.0
f, FREQUENCY (Hz)
CS, CHANNEL SEPARATION (dB)
CS = 20 Log DVOA
DVOM
10 100 1.0 k 100 k10 k
Drive Channel
VCC = +15 V
VEE = -15 V
RL = 2.0 KW
DVOD = 20 Vpp
TA = 25°C
MC33078
MC33079
f, FREQUENCY (Hz)
THD, TOTAL HARMONIC DISTORTION (%)
10 100 1.0 k 10 k 100 k
VCC = +15 V
VEE = -15 V
VO = 1.0 Vrms
TA = 25°C
VO, OUTPUT VOLTAGE (Vrms)
THD, TOTAL HARMONIC DISTORTION (%)
0 1.0 2.0 3.0 4.0 5.0 6.0 7.0 8.0 9.0
VCC = +15 V
VEE = -15 V
f = 2.0 kHz
TA = 25°C
AV = 1000
AV = 100
AV = 10
AV = 1.0
VCC |VEE| , SUPPLY VOLTAGE (V)
4121620
SR, SLEW RATE (V/ s)μ
Vin = 2/3 (VCC -VEE)
TA = 25°C
Rising
110
105
100
95
90
50
40
30
20
10
0
160
150
140
130
120
110
100
1.0
0.1
0.01
0.001
1.0
0.5
0.1
0.05
0.01
0.005
0.001
10
8.0
6.0
4.0
2.0
0
10 kW
VOM
Measurement Channel
-
+
100 W
100 W
VO
2.0 kW
+
-
DVin
VO
2.0
kW
-
+
RA
Vin 2.0 kW
VO
+
-10 kW
6 8 10 14 18
Falling
9.0
7.0
5.0
3.0
1.0
MC33078, MC33079
http://onsemi.com
8
25°C
-55°C
125°C
VCC = +15 V
VEE = -15 V
DVin = 100 mV
DVin
VO
CL
-
+
VCC = +15 V
VEE = -15 V
VO = 0 V
Phase
Gain
125°C
-55°C25°C
25°C
-55°C
125°C
Vin
VO
CL
2.0 kW
-
+
Gain
Phase
VCC = +15 V
VEE = -15 V
RL = 2.0 kW
TA = 25°C
Figure 24. Slew Rate versus Temperature Figure 25. Voltage Gain and Phase
versus Frequency
Figure 26. Open Loop Gain Margin and
Phase Margin versus Load Capacitance
Figure 27. Overshoot versus Output
Load Capacitance
Figure 28. Input Referred Noise Voltage and
Current versus Frequency
Figure 29. Total Input Referred Noise Voltage
versus Source Resistance
SR, SLEW RATE (V/s)μ
VCC = +15 V
VEE = -15 V
DVin = 20 V
TA, AMBIENT TEMPERATURE (°C)
Falling
Rising
-55 -25 0 25 50 75 100 125
f, FREQUENCY (Hz)
VOL
A, OPEN LOOP VOLTAGE GAIN (dB)
1.0 10 100 1.0 k 10 k 100 k 1.0 M 10 M
0
45
90
135
180
,
EXCESS PHASE
(
DEGREES
)
φ
A, OPEN LOOP GAIN MARGIN (dB)
m
1 10 100 1000
0
10
20
30
40
50
60
φ, PHASE MARGIN (DEGREES)
m
70
CL, OUTPUT LOAD CAPACITANCE (pF) CL, OUTPUT LOAD CAPACITANCE (pF)
10 100 1.0 k 10 k
os, OVERSHOOT (%)
10 100 1.0 k 10 k 100 k
10
0.1
f, FREQUENCY (Hz)
e, INPUT REFERRED NOISE VOLTAGE ()
nnV/ Hz
VCC = +15 V
VEE = -15 V
TA = 25°C
Voltage
Current
pA/ Hz
nV/ Hz
RS, SOURCE RESISTANCE (W)
i
, REFERRED NOISE VOLTAGE (
n
VCC = +15 V
VEE = -15 V
f = 1.0 kHz
TA = 25°C
Vn(total) =
10 100 1.0 k 10 k 100 k 1.0 M
, INPUT REFERRED NOISE CURRENT ( )
n
V)
10
8.0
6.0
4.0
2.0
120
100
80
60
40
20
0
14
12
10
8.0
6.0
4.0
2.0
0
100
80
60
40
20
0
100
80
50
30
20
10
8.0
5.0
3.0
2.0
1.0
1000
100
10
1.0
DVin
VO
2.0
kW
-
+
(inRs)2)e
n2)4KTR
S
Ǹ
MC33078, MC33079
http://onsemi.com
9
+
-
Phase
Gain
R1
R2
VO
VCC = +15 V
VEE = -15 V
RT = R1 +R2
AV = +100
VO = 0 V
TA = 25°C
Figure 30. Phase Margin and Gain Margin versus
Differential Source Resistance
Figure 31. Inverting Amplifier Slew Rate Figure 32. Noninverting Amplifier Slew Rate
Figure 33. Noninverting Amplifier Overshoot Figure 34. Low Frequency Noise Voltage
versus Time
, PHASE MARGIN (DEGREES)
A , GAIN MARGIN (dB)
RT, DIFFERENTIAL SOURCE RESISTANCE (W)
φm
10 100 1.0 k 10 k 100 k
VCC = +15 V
VEE = -15 V
AV = -1.0
RL = 2.0 kW
CL = 100 pF
TA = 25°C
V, OUTPUT VOLTAGE (5.0 V/DIV)
O
t, TIME (2.0 ms/DIV)
VCC = +15 V
VEE = -15 V
AV = +1.0
RL = 2.0 kW
CL = 100 pF
TA = 25°C
V, OUTPUT VOLTAGE (5.0 V/DIV)
O
t, TIME (2.0 ms/DIV)
VCC = +15 V
VEE = -15 V
RL = 2.0 kW
CL = 100 pF
AV = +1.0
TA = 25°C
V, OUTPUT VOLTAGE (5.0 V/DIV)
O
t, TIME (200 ms/DIV)
e, INPUT NOISE VOLTAGE (100 nV/DIV)
n
t, TIME (1.0 sec/DIV)
m
14
12
10
8.0
6.0
4.0
2.0
0
70
60
50
40
30
20
10
0
VCC = +15 V
VEE = -15 V
BW = 0.1 Hz to 10 Hz
TA = 25°C
MC33078, MC33079
http://onsemi.com
10
Figure 35. Voltage Noise Test Circuit
(0.1 Hz to 10 Hz
p
p
)
+
-
0.1 mF
10 W100 kW
2.0 kW
4.7 mF
Voltage Gain = 50,000
Scope
×1
Rin = 1.0 MW
1/2
MC33078
-
+
D.U.T.
100 kW
0.1 mF
2.2 mF
22 mF
24.3 kW
4.3 kW
110 kW
Note: All capacitors are nonpolarized.
ORDERING INFORMATION
Device Package Shipping
MC33078D SOIC8
98 Units / Rail
MC33078DG SOIC8
(PbFree)
MC33078DR2 SOIC8
2500 / Tape & Reel
MC33078DR2G SOIC8
(PbFree)
MC33078P PDIP8
50 Units / Rail
MC33078PG PDIP8
(PbFree)
MC33079D SOIC14
55 Units / Rail
MC33079DG SOIC14
(PbFree)
MC33079DR2 SOIC14
2500 / Tape & Reel
MC33079DR2G SOIC14
(PbFree)
MC33079P PDIP14
25 Units / Rail
MC33079PG PDIP14
(PbFree)
For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging
Specifications Brochure, BRD8011/D.
MC33078, MC33079
http://onsemi.com
11
PACKAGE DIMENSIONS
PDIP8
P SUFFIX
CASE 62605
ISSUE L
NOTES:
1. DIMENSION L TO CENTER OF LEAD WHEN
FORMED PARALLEL.
2. PACKAGE CONTOUR OPTIONAL (ROUND OR
SQUARE CORNERS).
3. DIMENSIONING AND TOLERANCING PER ANSI
Y14.5M, 1982.
14
58
F
NOTE 2 A
B
T
SEATING
PLANE
H
J
G
DK
N
C
L
M
M
A
M
0.13 (0.005) B M
T
DIM MIN MAX MIN MAX
INCHESMILLIMETERS
A9.40 10.16 0.370 0.400
B6.10 6.60 0.240 0.260
C3.94 4.45 0.155 0.175
D0.38 0.51 0.015 0.020
F1.02 1.78 0.040 0.070
G2.54 BSC 0.100 BSC
H0.76 1.27 0.030 0.050
J0.20 0.30 0.008 0.012
K2.92 3.43 0.115 0.135
L7.62 BSC 0.300 BSC
M--- 10 --- 10
N0.76 1.01 0.030 0.040
__
MC33078, MC33079
http://onsemi.com
12
PACKAGE DIMENSIONS
SOIC8 NB
CASE 75107
ISSUE AH
SEATING
PLANE
1
4
58
N
J
X 45 _
K
NOTES:
1. DIMENSIONING AND TOLERANCING PER
ANSI Y14.5M, 1982.
2. CONTROLLING DIMENSION: MILLIMETER.
3. DIMENSION A AND B DO NOT INCLUDE
MOLD PROTRUSION.
4. MAXIMUM MOLD PROTRUSION 0.15 (0.006)
PER SIDE.
5. DIMENSION D DOES NOT INCLUDE DAMBAR
PROTRUSION. ALLOWABLE DAMBAR
PROTRUSION SHALL BE 0.127 (0.005) TOTAL
IN EXCESS OF THE D DIMENSION AT
MAXIMUM MATERIAL CONDITION.
6. 75101 THRU 75106 ARE OBSOLETE. NEW
STANDARD IS 75107.
A
BS
D
H
C
0.10 (0.004)
DIM
A
MIN MAX MIN MAX
INCHES
4.80 5.00 0.189 0.197
MILLIMETERS
B3.80 4.00 0.150 0.157
C1.35 1.75 0.053 0.069
D0.33 0.51 0.013 0.020
G1.27 BSC 0.050 BSC
H0.10 0.25 0.004 0.010
J0.19 0.25 0.007 0.010
K0.40 1.27 0.016 0.050
M0 8 0 8
N0.25 0.50 0.010 0.020
S5.80 6.20 0.228 0.244
X
Y
G
M
Y
M
0.25 (0.010)
Z
Y
M
0.25 (0.010) ZSXS
M
____
1.52
0.060
7.0
0.275
0.6
0.024
1.270
0.050
4.0
0.155
ǒmm
inchesǓ
SCALE 6:1
*For additional information on our PbFree strategy and soldering
details, please download the ON Semiconductor Soldering and
Mounting Techniques Reference Manual, SOLDERRM/D.
SOLDERING FOOTPRINT*
MC33078, MC33079
http://onsemi.com
13
PACKAGE DIMENSIONS
PDIP14
CASE 64606
ISSUE P
17
14 8
B
ADIM MIN MAX MIN MAX
MILLIMETERSINCHES
A0.715 0.770 18.16 19.56
B0.240 0.260 6.10 6.60
C0.145 0.185 3.69 4.69
D0.015 0.021 0.38 0.53
F0.040 0.070 1.02 1.78
G0.100 BSC 2.54 BSC
H0.052 0.095 1.32 2.41
J0.008 0.015 0.20 0.38
K0.115 0.135 2.92 3.43
L
M−−− 10 −−− 10
N0.015 0.039 0.38 1.01
__
NOTES:
1. DIMENSIONING AND TOLERANCING PER ANSI
Y14.5M, 1982.
2. CONTROLLING DIMENSION: INCH.
3. DIMENSION L TO CENTER OF LEADS WHEN
FORMED PARALLEL.
4. DIMENSION B DOES NOT INCLUDE MOLD FLASH.
5. ROUNDED CORNERS OPTIONAL.
F
HG D
K
C
SEATING
PLANE
N
T
14 PL
M
0.13 (0.005)
L
M
J0.290 0.310 7.37 7.87
MC33078, MC33079
http://onsemi.com
14
SOIC14
CASE 751A03
ISSUE H
NOTES:
1. DIMENSIONING AND TOLERANCING PER
ANSI Y14.5M, 1982.
2. CONTROLLING DIMENSION: MILLIMETER.
3. DIMENSIONS A AND B DO NOT INCLUDE
MOLD PROTRUSION.
4. MAXIMUM MOLD PROTRUSION 0.15 (0.006)
PER SIDE.
5. DIMENSION D DOES NOT INCLUDE
DAMBAR PROTRUSION. ALLOWABLE
DAMBAR PROTRUSION SHALL BE 0.127
(0.005) TOTAL IN EXCESS OF THE D
DIMENSION AT MAXIMUM MATERIAL
CONDITION.
A
B
G
P7 PL
14 8
7
1
M
0.25 (0.010) B M
S
B
M
0.25 (0.010) A S
T
T
F
RX 45
SEATING
PLANE D14 PL K
C
J
M
_DIM MIN MAX MIN MAX
INCHESMILLIMETERS
A8.55 8.75 0.337 0.344
B3.80 4.00 0.150 0.157
C1.35 1.75 0.054 0.068
D0.35 0.49 0.014 0.019
F0.40 1.25 0.016 0.049
G1.27 BSC 0.050 BSC
J0.19 0.25 0.008 0.009
K0.10 0.25 0.004 0.009
M0 7 0 7
P5.80 6.20 0.228 0.244
R0.25 0.50 0.010 0.019
__ __
7.04
14X
0.58
14X
1.52
1.27
DIMENSIONS: MILLIMETERS
1
PITCH
SOLDERING FOOTPRINT*
7X
*For additional information on our PbFree strategy and soldering
details, please download the ON Semiconductor Soldering and
Mounting Techniques Reference Manual, SOLDERRM/D.
ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice
to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
“Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All
operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights
nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications
intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should
Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates,
and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal
Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
N. American Technical Support: 8002829855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81357733850
MC33078/D
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
P.O. Box 5163, Denver, Colorado 80217 USA
Phone: 3036752175 or 8003443860 Toll Free USA/Canada
Fax: 3036752176 or 8003443867 Toll Free USA/Canada
Email: orderlit@onsemi.com
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your local
Sales Representative