SAFETY LIGHT SCREENS SAFETY LIGHT SCREENS Safety Light Screens EZ-SCREEN(R) . . . . . . . . . . . . . . . . . . . . . . . .page 20 * Provides point-of-operation, area, access and perimeter safeguarding. * Protects personnel from injury and equipment from damage. * Offered with 14 and 30 mm resolution, single-beam points, or multi-beam grids. * Requires no controller. * Rated Type 4. * Available with optional ESD-safe housing, pigtail connectors and cascading on some models. * Reduced resolution and fixed blanking on EZ-SCREEN Type 4. PICO-GUARDTM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 36 * Provides access and short-range perimeter guarding. * Offers low-cost alternative to cumbersome machine guarding methods. * Combines fiber optic and photoelectric technologies. * Uses fiber optic technology for intrinsically safe guarding in explosive or harsh environments. * Installs easily using inexpensive plastic fiber optics. MICRO-SCREEN(R) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 42 * Designed for light- to medium-duty production machinery. * Features ultra-compact emitters and receivers ranging from 102 to 1829 mm long, depending on series and model. * Offered with optional ESD-safe housing. * Includes floating blanking and optional fixed blanking. * Controllers offered with DeviceNetTM, E-stop input and muting. MINI-SCREEN(R) . . . . page 58 EZ-SCREEN(R) Type 2 . page 78 * Suitable for heavy-duty machine guarding applications--extra robust housing available. * Features rugged, compact emitters and receivers ranging from 114 to 1829 mm long, depending on series and model. * Includes floating blanking and selectable auto power-up. * Offers optional fixed-beam blanking and muting. * Offered with yellow or black housing on emitters and receivers. * Designed for lower-risk applications. * Provides economical, compact optical safeguarding. * Meets Type 2 requirements per IEC 61496-1/-2. * Offered with 30 mm resolution and 15 m range. More information online at bannerengineering.com 17 SAFETY LIGHT SCREENS SAFETY LIGHT SCREENS Type Model Catalog Safety Page Category EZ-SCREEN(R) Cascade Systems Page 20 4 PICO-GUARDTM 14 & 30 mm Maximum Range 18 m 24V dc 300 to 584 mm Grid & Point Systems 18 m 70 m (beam spacing) 300 to 584 mm Grid Systems (beam spacing) Page 36 4 Point Systems 24V dc 31 m Supplied by controller 9m -- Emitters & Receivers 19 mm MICRO-SCREEN(R) Standard Series 32 mm V-Series Page 42 Controllers 4 24V dc, 115 or 230V ac Metal Box Controllers N/A N/A 24V dc DIN Module Controllers Emitters & Receivers 19 & 25 mm MINI-SCREEN(R) Standard Series Supplied by controller Page 58 Controllers 4 N/A EZ-SCREEN(R) Type 2 Type 2 Systems 24V dc, 115V ac or 230V ac N/A 24V dc DIN Module Controllers Page 78 NC = Normally Closed Relay, NO = Normally Open Relay More information online at 18 m 38 mm Heavy-Duty Series Metal Box Controllers 18 Supply Voltage 14 & 30 mm Standard Systems SAFETY LIGHT SCREEN SELECTION Resolution bannerengineering.com 2 30 mm 24V dc 15 m SAFETY LIGHT SCREENS Blanking Muting Option Output Response Time Reduced Resolution Environmental Rating 9 to 56 ms (floating) 2 PNP OSSD Housing Material Aluminum housing with yellow polyester powder finish or nickel-plated ESD IEC IP65 Black aluminum housing, tempered glass window IEC IP65 12 mm threaded barrel: Black polycarbonate plastic housing 30 mm threaded barrel: Stainless steel housing, glass window. IEC IP67 Aluminum housing with yellow polyester powder finish or nickel-plated ESD IEC IP65 Yes Welded steel box with black polyester powder paint finish IEC IP64 (Trip or Latch) Optional Accessory (see page 123) Gray polycarbonate IEC IP20 -- -- Aluminum housing with black anodized or yellow polyester painted finish IEC IP65 Yes Welded steel box with black polyester powder paint finish IEC IP64 Optional Accessory (see page 123) Gray polycarbonate IEC IP20 Aluminum housing with yellow polyester powder finish IEC IP65 (Trip /Latch Selectable) 2-beam & Fixed Optional Accessory (see page 123) 24 ms -- 2 PNP OSSD (Trip /Latch Selectable) -- Optional Accessory (see page 123) See page 108 for controller -- 11 to 56 ms 13 ms See page 108 for controller -- Reduced Resolution < 38 ms (< 48 ms for muting) (floating) 2 NO 1- or 2-beam & Fixed (Trip or Latch) 2 or 4 NO Reduced Resolution < 48 to < 72 ms (< 58 to < 82 ms for muting) (floating) 1- or 2-beam & Fixed 2 NO (Trip or Latch) 2 PNP OSSD (Trip or Latch) -- Optional Accessory (see page 123) 11 to 25 ms More information online at bannerengineering.com 19 SAFETY LIGHT SCREENS Safety Output SAFETY LIGHT SCREENS SAFETY LIGHT SCREENS EZ-SCREEN(R) Systems EZ-SCREEN(R) PICO-GUARDTM MICRO-SCREEN(R) MINI-SCREEN(R) EZ-SCREEN(R) TYPE 2 QD CABLES 8-Pin Euro + 3- & 8-Pin Mini PAGE 176 ).$)#!4/23 PAGE 187 BRACKETS EZ-SCREEN (R) Safety Light Screens * Simple, two-piece integrated system has no control box. * High-resolution 14 and 30 mm EZ-SCREEN(R) point-of-operation systems provide finger, hand and ankle detection. * EZ-SCREEN Point and Grid systems allow one-, two-, threeor four-beam perimeter and access guarding. * Superior optical design and finely focused 2.5 beam make systems extremely easy to align and maintain. * Status indicators and diagnostics show when alignment is complete and if there are problems with the installation. * Redundant microprocessor-controlled, self-checking design exceeds control reliability requirements and is certified per CE (Type 4/Category 4) and cULus (NIPF, UL 61496, UL 1998). * Unique cascading models (patent-pending) allow up to four systems of any length and resolution to be wired together to form a single safety device. * Systems have ranges up to 70 m, with power and range for all types of applications including long-range perimeter guarding. PAGE 190 -)22/23 PAGE 204 A complete family of machine guarding products. 34!.$3 PAGE 209 ,%.3 3()%,$3 PAGE 213 %.#,/352%3 PAGE 216 Point of operation. * Finger, hand or ankle detection at the point of operation. * Use 14 or 30 mm EZ-SCREEN. 20 Area. * Mount horizontally to eliminate safety mats and area scanners. * Manually reset Latch output when area is clear. More information online at Perimeter. * Guard mulitple sides of a dangerous area up to 70 m long. * Expand guarding with optional corner mirrors and mounting stands. 14 mm Resolution Models . . . . . . . . . . . . Page 21 30 mm Resolution Models . . . . . . . . . . . . . . . . . 22 Cascade Systems . . . . . . . . . . . . . . . . . . . . . . . . 24 14 and 30 mm Interfacing Products. . . . . . . . . . 26 14 and 30 mm Resolution Kits . . . . . . . . . . . . . . 27 Grid and Point Models . . . . . . . . . . . . . . . . . . 28 Grid and Point Interfacing Products . . . . . . . . . . 30 Grid Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 Point Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 Long-range single sided. * EZ-SCREEN Grid systems provide 2, 3 or 4 beams. * Beam spacing is from 300 to 584 mm. bannerengineering.com Single point access. ESD applications. * Use with angled * Dissipate mirrors to simulate electrostatic a 2-beam system. discharges. * Use multiple units * Ideal for for custom beam microelectronic patterns. applications. SAFETY LIGHT SCREENS (R) EZ-SCREEN Systems 45.0 mm 7-segment diagnostic display Detailed Dimensions Blocked beam zone indicators Full View of Available Finishes System status and system reset status SAFETY LIGHT SCREENS EZ-SCREEN(R) Systems EZ-SCREEN(R) Integral or pigtail Euro-style QD connection PICO-GUARDTM Durable aluminum housing to resist twisting L MICRO-SCREEN(R) Metal end caps for added durability MINI-SCREEN(R) User configurable trip or latch outputs and Scan Code 1 or 2 EZ-SCREEN(R) TYPE 2 Fixed or 2-beam reduced resolution (floating) blanking EDM input and optional TEST** function 36.0 mm Yellow Painted Aluminum EZ-SCREEN Systems Nickel-Plated ESD EZ-SCREEN(R) Systems, 14 mm Resolution Models* Resolution Range Download PDF Defined Housing Supply Area Length (L) Voltage Safety Response Outputs Time SLSP14-150Q88 SLSE14-150Q8 SLSR14-150Q8 150 mm 262 mm 11 ms SLSP14-300Q88 SLSE14-300Q8 SLSR14-300Q8 300 mm 372 mm 15 ms SLSP14-450Q88 SLSE14-450Q8 SLSR14-450Q8 450 mm 522 mm 19 ms 600 mm 671 mm 750 mm 821 mm 27 ms SLSP14-900Q88 SLSE14-900Q8 SLSR14-900Q8 900 mm 971 mm 32 ms SLSP14-1050Q88 SLSE14-1050Q8 SLSR14-1050Q8 1050 mm 1120 mm 36 ms SLSP14-600Q88 SLSE14-600Q8 SLSR14-600Q8 SLSP14-750Q88 SLSE14-750Q8 SLSR14-750Q8 0.1 to 6 m 24V dc 2 PNP OSSD 23 ms Connection** Data Sheet 8-pin Euro QD 112852 14 mm Resolution 14 mm Resolution * Nickel-plated emitters and receivers used for ESD safe applications are available by adding "N" in the model number (example, SLSE14-150NQ8). ** For an emitter with TEST function, replace Q8 with Q5 on emitter model numbers (example, SLSE14-150Q5) and Q88 with Q85 on pair model numbers (example, SLSP14-150Q85). For a 300 mm Euro pigtail QD, replace "Q" with "P" in models numbers (example, SLSP14-150P88). A model with a QD requires a mating cable (see page 176). A pair includes an emitter and receiver (example, SLSP14-150Q88). Emitters (example, SLSE14-150Q8) and receivers (example, SLSR14-150Q8) are also sold separately. More information online at bannerengineering.com 21 SAFETY LIGHT SCREENS SAFETY LIGHT SCREENS EZ-SCREEN(R) Systems EZ-SCREEN(R) Systems, 14 mm Resolution (cont'd) Models* Resolution Range Safety Response Outputs Time Connection** Data Sheet 8-pin Euro QD 112852 SLSP14-1200Q88 SLSE14-1200Q8 EZ-SCREEN(R) SLSR14-1200Q8 PICO-GUARDTM SLSP14-1350Q88 MICRO-SCREEN(R) Defined Housing Supply Area Length (L) Voltage Download PDF SLSE14-1350Q8 1200 mm 1270 mm 40 ms 1350 mm 1420 mm 43 ms 1500 mm 1569 mm 1650 mm 1719 mm 52 ms 1800 mm 1869 mm 56 ms SLSR14-1350Q8 MINI-SCREEN(R) (R) EZ-SCREEN TYPE 2 SLSP14-1500Q88 SLSE14-1500Q8 0.1 to 6 m SLSR14-1500Q8 SLSP14-1650Q88 24V dc 2 PNP OSSD 48 ms 14 mm Resolution SLSE14-1650Q8 SLSR14-1650Q8 SLSP14-1800Q88 SLSE14-1800Q8 SLSR14-1800Q8 EZ-SCREEN(R) Systems, 30 mm Resolution Models* Resolution Range Download PDF Defined Housing Supply Area Length (L) Voltage Safety Response Outputs Time Connection** Data Sheet 8-pin Euro QD 112852 SLSP30-150Q88 SLSE30-150Q8 150 mm 262 mm 9 ms 300 mm 372 mm 11 ms 450 mm 522 mm 600 mm 671 mm 15 ms 750 mm 821 mm 17 ms SLSR30-150Q8 SLSP30-300Q88 SLSE30-300Q8 SLSR30-300Q8 SLSP30-450Q88 SLSE30-450Q8 SLSR30-450Q8 0.1 to 18 m 24V dc 2 PNP OSSD 13 ms 30 mm Resolution SLSP30-600Q88 SLSE30-600Q8 SLSR30-600Q8 SLSP30-750Q88 SLSE30-750Q8 SLSR30-750Q8 14 mm Resolution 30 mm Resolution * Nickel-plated emitters and receivers used for ESD safe applications are available by adding "N" in the model number (example, SLSE14-1200NQ8). ** For an emitter with TEST function, replace Q8 with Q5 on emitter model numbers (example, SLSE14-1200Q5) and Q88 with Q85 on pair model numbers (example, SLSP14-1200Q85). For a 300 mm Euro pigtail QD, replace "Q" with "P" in models numbers (example, SLSP14-1200P88). A model with a QD requires a mating cable (see page 176). A pair includes an emitter and receiver (example, SLSP14-1200Q88). Emitters (example, SLSE14-1200Q8) and receivers (example, SLSR14-1200Q8) are also sold separately. 22 More information online at bannerengineering.com SAFETY LIGHT SCREENS (R) EZ-SCREEN Systems Models* Resolution Range Defined Housing Supply Area Length (L) Voltage Download PDF Safety Response Outputs Time Connection** Data Sheet SLSP30-900Q88 SLSE30-900Q8 900 mm SAFETY LIGHT SCREENS EZ-SCREEN(R) Systems, 30 mm Resolution (cont'd) 19 ms 971 mm SLSR30-900Q8 EZ-SCREEN(R) SLSP30-1050Q88 PICO-GUARDTM SLSE30-1050Q8 1050 mm 21 ms 1120 mm MICRO-SCREEN(R) SLSR30-1050Q8 MINI-SCREEN(R) SLSP30-1200Q88 SLSE30-1200Q8 23 ms 1200 mm 1270 mm 0.1 to 18 m 1350 mm 1420 mm 1500 mm 1569 mm 27 ms 1650 mm 1719 mm 30 ms 1800 mm 1869 mm 32 ms EZ-SCREEN(R) TYPE 2 SLSR30-1200Q8 SLSP30-1350Q88 SLSE30-1350Q8 SLSR30-1350Q8 24V dc 2 PNP OSSD 25 ms 8-pin Euro QD 112852 30 mm Resolution SLSP30-1500Q88 SLSE30-1500Q8 SLSR30-1500Q8 SLSP30-1650Q88 SLSE30-1650Q8 SLSR30-1650Q8 SLSP30-1800Q88 SLSE30-1800Q8 SLSR30-1800Q8 30 mm Resolution * Nickel-plated emitters and receivers used for ESD safe applications are available by adding "N" in the model number (example, SLSE30-900NQ8). ** For an emitter with TEST function, replace Q8 with Q5 on emitter model numbers (example, SLSE30-900Q5) and Q88 with Q85 on pair model numbers (example, SLSP30-900Q85). For a 300 mm Euro pigtail QD, replace "Q" with "P" in models numbers (example, SLSP30-900P88). A model with a QD requires a mating cable (see page 176). A pair includes an emitter and receiver (example, SLSP30-900Q88). Emitters (example, SLSE30-900Q8) and receivers (example, SLSR14-900Q8) are also sold separately. More information online at bannerengineering.com 23 SAFETY LIGHT SCREENS SAFETY LIGHT SCREENS EZ-SCREEN(R) Systems EZ-SCREEN(R) Cascade Systems, 14 mm Resolution Models* Resolution Range Safety Response Outputs Time** Connection*** Data Sheet 8-pin Euro QD 112852 SLSCP14-300Q88 SLSCE14-300Q8 EZ-SCREEN(R) SLSCR14-300Q8 PICO-GUARDTM SLSCP14-450Q88 MICRO-SCREEN(R) Defined Housing Supply Area Length (L) Voltage Download PDF SLSCE14-450Q8 300 mm 372 mm 15 ms 450 mm 522 mm 19 ms 600 mm 671 mm 23 ms 750 mm 821 mm 27 ms 900 mm 971 mm 32 ms 1050 mm 1120 mm 1200 mm 1270 mm 40 ms 1350 mm 1420 mm 43 ms 1500 mm 1569 mm 48 ms 1650 mm 1719 mm 52 ms 1800 mm 1869 mm 56 ms SLSCR14-450Q8 MINI-SCREEN(R) (R) EZ-SCREEN TYPE 2 SLSCP14-600Q88 SLSCE14-600Q8 SLSCR14-600Q8 SLSCP14-750Q88 SLSCE14-750Q8 SLSCR14-750Q8 SLSCP14-900Q88 SLSCE14-900Q8 SLSCR14-900Q8 SLSCP14-1050Q88 SLSCE14-1050Q8 SLSCR14-1050Q8 0.1 to 6 m 24V dc 2 PNP OSSD 36 ms 14 mm Resolution SLSCP14-1200Q88 SLSCE14-1200Q8 SLSCR14-1200Q8 SLSCP14-1350Q88 SLSCE14-1350Q8 SLSCR14-1350Q8 SLSCP14-1500Q88 SLSCE14-1500Q8 SLSCR14-1500Q8 SLSCP14-1650Q88 SLSCE14-1650Q8 SLSCR14-1650Q8 SLSCP14-1800Q88 SLSCE14-1800Q8 SLSCR14-1800Q8 14 mm Resolution * Nickel-plated emitters and receivers used for ESD safe applications are available by adding "N" in the model number (example, SLSCE14-300NQ8). ** Cascading system response time: To the response time of the slowest pair, add 2 ms for each additional pair. Example: slowest pair's response time is 15 ms, and the system has three additional pairs (four pairs total), so the system maximum response time is 15 ms + 6 ms (3 pairs x 2 ms) = 21 ms. *** For an emitter with TEST function, replace Q8 with Q5 on emitter model numbers (example, SLSCE14-300Q5) and Q88 with Q85 on pair model numbers (example, SLSCP14-300Q85). For a 300 mm Euro pigtail QD, replace "Q" with "P" in models numbers (example, SLSCP14-300P88). A model with a QD requires a mating cable (see page 176). A pair includes an emitter and receiver (example, SLSCP14-300Q88). Emitters (example, SLSCE14-300Q8) and receivers (example, SLSCR14-300Q8) are also sold separately. 24 More information online at bannerengineering.com SAFETY LIGHT SCREENS (R) EZ-SCREEN Systems Models* Resolution Range Defined Housing Supply Area Length (L) Voltage Download PDF Safety Response Outputs Time** Connection*** Data Sheet SLSCP30-300Q88 300 mm SLSCE30-300Q8 SAFETY LIGHT SCREENS EZ-SCREEN(R) Cascade Systems, 30 mm Resolution 11 ms 372 mm SLSCR30-300Q8 EZ-SCREEN(R) SLSCP30-450Q88 PICO-GUARDTM SLSCE30-450Q8 450 mm 13 ms 522 mm MICRO-SCREEN(R) SLSCR30-450Q8 MINI-SCREEN(R) SLSCP30-600Q88 SLSCE30-600Q8 600 mm 671 mm 15 ms 750 mm 821 mm 17 ms 900 mm 971 mm 19 ms 0.1 to 18 m 1050 mm 1120 mm 1200 mm 1270 mm 23 ms 1350 mm 1420 mm 25 ms 1500 mm 1569 mm 27 ms 1650 mm 1719 mm 30 ms 1800 mm 1869 mm 32 ms EZ-SCREEN(R) TYPE 2 SLSCR30-600Q8 SLSCP30-750Q88 SLSCR30-750Q8 SLSCR30-750Q8 SLSCP30-900Q88 SLSCE30-900Q8 SLSCR30-900Q8 SLSCP30-1050Q88 SLSCE30-1050Q8 SLSCR30-1050Q8 24V dc 2 PNP OSSD 21 ms 8-pin Euro QD 112852 30 mm Resolution SLSCP30-1200Q88 SLSCE30-1200Q8 SLSCR30-1200Q8 SLSCP30-1350Q88 SLSCE30-1350Q8 SLSCR30-1350Q8 SLSCP30-1500Q88 SLSCE30-1500Q8 SLSCR30-1500Q8 SLSCP30-1650Q88 SLSCE30-1650Q8 SLSCR30-1650Q8 SLSCP30-1800Q88 SLSCE30-1800Q8 SLSCR30-1800Q8 30 mm Resolution * Nickel-plated emitters and receivers used for ESD safe applications are available by adding "N" in the model number (example, SLSCE30-300NQ8). ** Cascading system response time: To the response time of the slowest pair, add 2 ms for each additional pair. Example: slowest pair's response time is 15 ms, and the system has three additional pairs (four pairs total), so the system maximum response time is 15 ms + 6 ms (3 pairs x 2 ms) = 21 ms. *** For an emitter with TEST function, replace Q8 with Q5 on emitter model numbers (example, SLSCE30-300Q5) and Q88 with Q85 on pair model numbers (example, SLSCP30-300Q85). For a 300 mm Euro pigtail QD, replace "Q" with "P" in models numbers (example, SLSCP30-300P88). A model with a QD requires a mating cable (see page 176). A pair includes an emitter and receiver (example, SLSCP30-300Q88). Emitters (example, SLSCE30-300Q8) and receivers (example, SLSCR30-300Q8) are also sold separately. More information online at bannerengineering.com 25 SAFETY LIGHT SCREENS EZ-SCREEN(R) PICO-GUARDTM MICRO-SCREEN(R) EZ-SCREEN(R) Interfacing Products Models Interface Modules SAFETY LIGHT SCREENS EZ-SCREEN(R) Systems Download PDF Description IM-T-9A (3 NO) IM-T-11A (2 NO/1 NC) * Interface modules provide two or three normally open force-guided relay outputs rated at 6 A. * EZ-SCREEN monitors these interface modules when they are connected to the EZ-SCREEN External Device Monitoring (EDM) inputs. * Convenient plug-in terminal blocks on a 22.5 mm DIN-rail mountable housing are included. Product Information Data Sheet Page 132 62822 MM-TA-12B MMD-TA-12B Receiver AC Interface Boxes Emitter AC Interface Boxes MMD-TA-11B EZAC-R9-QE8 EZAC-E-QE8 Page 123 * Versatile power supplies allow EZ-SCREEN systems to connect to AC power sources. * Models are available to accommodate receivers only, emitters only, or both. * Receiver models include 8 amp safety relay output. Page 184 120321 * Pairs of contactors create safety stop circuits with two normally open contacts in series. * EZ-SCREEN can monitor the circuit because of the contacts' force-guided mechanically linked design. * Contactors add 10 or 16 amp current carrying capability to any safety system. * Auxiliary contacts add 3 or 4 normally open contacts. * Suppressors extend the life of an actuating device that uses a contactor. * Modular design simplifies assembly and installation. Page 186 111881 116390 EZAC-R15A-QE8-QS83 EZAC-R8N-QE8-QS53 EZAC-R10N-QE8-QS53 EZAC-E-QE5 EZAC-E-QE8-QS3 EZAC-E-QE5-QS5 11-BG00-31-D-024 11-BF16C01-024 Aux. Contacts 11-BGX10-40 11-G484-30 Suppressors 11-BGX77-048 11-G318-48 26 63517 * The Muting Module temporarily inhibits a safety light screen so materials can safely pass through the screen without stopping the machinery. * The module uses redundant microcontrollerbased logic. EZAC-R11-QE8 Mechanically Linked Contactors Contactors EZ-SCREEN(R) TYPE 2 Muting Modules MINI-SCREEN(R) More information online at bannerengineering.com SAFETY LIGHT SCREENS (R) EZ-SCREEN Systems SAFETY LIGHT SCREENS EZ-SCREEN(R) 14 & 30 mm Resolution Kits You can purchase a kit that contains an emitter and receiver of equal length and resolution; brackets; and optional interfacing solution and quick-disconnect cables. Detailed information about individual kit components is as follows. * Emitter and Receivers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 21 * Interfacing Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 EZ-SCREEN(R) * Cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 176 PICO-GUARDTM * Brackets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 190 MICRO-SCREEN(R) SLSK14-600Q88-1RE25 * SLSK30-600Q88-1RE25 No SLSK14-600NQ88-1RE25 * SLSK30-600NQ88-1RE25 600 mm SLSCK14-600Q88-1RE25 * SLSCK30-600Q88-1RE25 Yes* SLSCK14-600NQ88-1RE25 * SLSCK30-600NQ88-1RE25 * 14 mm 6m 30 mm 18 m 14 mm 6m 30 mm 18 m 14 mm 6m 30 mm 18 m 14 mm 6m 30 mm 18 m QD Ca bling In t er f Op tionacing s s E mi t t e Re c ei r & C onnev er c t io n Ou t pu Op tiont N o. o f Ou t pu ts S u p pl Vol t agy e Range u t io n Re s ol NickelYellow Plated Kit Model Number P r o t ec H ei g h t e d t Sensor Housing C as c a ding A partial listing of kits is listed below; see Kit Model Key to order other variations. Trip/ Integral Latch Euro QD IM-T-9A, 8 m, 24V dc 2 OSSD Select- without 1 each 2 each able Test For cascading systems, order one kit; up to three additional emitter/receiver pairs; and two double-ended cables per additional emitter/receiver pair. Opposed pairs must be the same length and resolution (see page 24). Kit Model Key Model Style Kit Resolution Protected Height S L S K 1 4 6 0 0 Model Style SLS = Safety Light Screen SLSC = Cascading Safety Light Screen Finish QD Options Interfacing Options QD Cabling Length Options Q 8 8 1 R E 2 5 Kit K = Kit QD Cabling Length Options RE15 = 5 m, 2 each RE25 = 8 m, 2 each R15E25 = 5 m (Receiver) & 8 m (Emitter) R25E15 = 8 m (Receiver) & 5 m (Emitter) RE50 = 15 m, 2 each R15E50 = 5 m (Receiver) & 15 m (Emitter) R50E15 = 15 m (Receiver) & 5 m (Emitter) R25E50 = 8 m (Receiver) & 15 m (Emitter) R50E25 = 15 m (Receiver) & 8 m (Emitter) RE75 = 23 m, 2 each RE100 = 30 m, 2 each SLS Resolution 14 = 14 mm 30 = 30 mm Protected Height 150 mm 300 mm 450 mm 600 mm 750 mm 900 mm 1050 mm 1200 mm 1350 mm 1500 mm 1650 mm 1800 mm Sensor Finish Blank = Yellow powder coat N = Nickel plated ESD Receiver & Emitter QD Options Q85 = Receiver with integral 8-pin Euro-style QD Emitter with integral 5-pin Euro-style QD with Test Q88 = Receiver with integral 8-pin Euro-style QD Emitter with integral 8-pin Euro-style QD P85 = Receiver with integral 8-pin Euro-style pigtail QD Emitter with integral 5-pin Euro-style pigtail QD with Test P88 = Receiver with integral 8-pin Euro-style pigtail QD Emitter with integral 8-pin Euro-style pigtail QD Interfacing Options 1 = IM-T-9A Interface Module, 1 each 2 = IM-T-11A Interface Module, 1 each 3 = 11-BG00-31-D-024 Contactors (10A), 2 each 4 = 11-BF16C01-024 Contactors (16A), 2 each 5 = EZAC-R9-QE8 = AC Interface Box (3 NO), 1 each 6 = EZAC-R11-QE8 = AC Interface Box (2 NO/1 NC), 1 each NOTE: Not all combinations are possible. Contact Banner Engineering Corp. for additional information and/or verification of valid kit model numbers. More information online at bannerengineering.com 27 MINI-SCREEN(R) EZ-SCREEN(R) TYPE 2 SAFETY LIGHT SCREENS SAFETY LIGHT SCREENS EZ-SCREEN(R) Systems EZ-SCREEN(R) Grid & Point Systems One to four beam models for access or perimeter guarding applications Detailed Dimensions Full View Range from 0.8 to 20 m or 15 to 70 m, depending on model EZ-SCREEN(R) 55.0 mm 7-segment diagnostic display PICO-GUARDTM MICRO-SCREEN(R) Bi-color status indicator (R) MINI-SCREEN IEC 61496-1 Type 4 (R) EZ-SCREEN TYPE 2 User configurable trip or latch outputs and Scan Code 1 or 2 L Configuration access port Models with integral Mini and Euro QD, or wiring terminal chamber EZ-SCREEN Grid 52.0 mm QD cables ordered separately (see EZ-SCREEN Grid page 179) EZ-SCREEN Point EZ-SCREEN Point EZ-SCREEN(R) Grid & Point Systems Models Beam Spacing Range Download PDF Protected Housing Supply Safety Response Height Length (L) Voltage Outputs Time 0.8 to 20 m 3-pin Mini QD SGR4-300Q8 8-pin Mini QD 900 mm SGXLP4-300Q83 300 mm SGXLE4-300Q3 1084 mm Emitter, 3-pin Mini QD Receiver, 8-pin Mini QD 15 to 70 m 3-pin Mini QD SGR4-300Q8 24V dc SGP3-400Q83 0.8 to 20 m SGE3-400Q3 400 mm 984 mm 15 to 70 m SGR3-400Q8 * 8-pin Mini QD 24 ms Emitter, 3-pin Mini QD Receiver, 8-pin Mini QD 68410 8-pin Mini QD 800 mm SGXLE3-400Q3 2 PNP OSSD 3-pin Mini QD SGR3-400Q8 SGXLP3-400Q83 Data Sheet Emitter, 3-pin Mini QD Receiver, 8-pin Mini QD SGP4-300Q83 SGE4-300Q3 Connection* Emitter, 3-pin Mini QD Receiver, 8-pin Mini QD 3-pin Mini QD 8-pin Mini QD 4-Beam Grid 3-Beam Grid For emitters and receivers with a wiring terminal chamber, remove the Q3, Q8 or Q83 from the model number (example, SGE4-300). For an emitter with TEST function, replace Q3 with Q5 on emitter model numbers (example, SGE4-300Q5) and Q83 with Q85 on pair model numbers (example, SGP4-300Q85). For emitters and receivers with an 8-pin integral Euro QD, replace Q3 with Q8E on model numbers (example, SGE4-300Q8E) and Q83 with Q88E on pair model numbers (example, SGP4-300Q88E). A model with a QD requires a mating cable (see page 178). A pair includes an emitter and receiver (example, SGP4-300Q83). Emitters (example, SGE4-300Q3) and receivers (example, SGR4-300Q8) are also sold separately. 28 More information online at bannerengineering.com SAFETY LIGHT SCREENS (R) EZ-SCREEN Systems Beam Spacing Models Range Download PDF Protected Housing Supply Safety Response Height Length (L) Voltage Outputs Time 0.8 to 20 m 3-pin Mini QD EZ-SCREEN(R) SGR3-533Q8 8-pin Mini QD 1066 mm SGXLP3-533Q83 1251 mm 533 mm 15 to 70 m MINI-SCREEN(R) 8-pin Mini QD 0.8 to 20 m SGE2-500Q3 EZ-SCREEN(R) TYPE 2 Emitter, 3-pin Mini QD Receiver, 8-pin Mini QD SGP2-500Q83 3-pin Mini QD SGR2-500Q8 8-pin Mini QD 500 mm 684 mm Emitter, 3-pin Mini QD Receiver, 8-pin Mini QD 500 mm SGXLE2-500Q3 15 to 70 m 24V dc SGP2-584Q83 2 PNP OSSD 0.8 to 20 m SGE2-584Q3 8-pin Mini QD 24 ms Emitter, 3-pin Mini QD Receiver, 8-pin Mini QD 3-pin Mini QD SGR2-584Q8 8-pin Mini QD 584 mm SGXLP2-584Q83 68410 3-pin Mini QD SGR2-500Q8 584 mm SGXLE2-584Q3 768 mm 15 to 70 m Emitter, 3-pin Mini QD Receiver, 8-pin Mini QD 3-pin Mini QD SGR2-584Q8 8-pin Mini QD Emitter, 3-pin Mini QD Receiver, 8-pin Mini QD SPP1Q83 0.8 to 20 m SPE1Q3 3-pin Mini QD SPR1Q8 8-pin Mini QD N/A SPXLE1Q3 MICRO-SCREEN(R) 3-pin Mini QD SGR3-533Q8 SPXLP1Q83 PICO-GUARDTM Emitter, 3-pin Mini QD Receiver, 8-pin Mini QD SGXLE3-533Q3 SGXLP2-500Q83 Data Sheet Emitter, 3-pin Mini QD Receiver, 8-pin Mini QD SGP3-533Q83 SGE3-533Q3 Connection* SAFETY LIGHT SCREENS EZ-SCREEN(R) Grid & Point Systems (cont'd) 149 mm 1-BEAM 15 to 70 m Emitter, 3-pin Mini QD Receiver, 8-pin Mini QD 68413 3-pin Mini QD SPR1Q8 8-pin Mini QD 3-Beam Grid 2-Beam Grid 1-Beam Point ** For emitters and receivers with a wiring terminal chamber, remove the Q3, Q8 or Q83 from the model number (example, SGE3-533). For an emitter with TEST function, replace Q3 with Q5 on emitter model numbers (example, SGE3-533Q5) and Q83 with Q85 on pair model numbers (example, SGP3-533Q85). For emitters and receivers with an 8-pin integral Euro QD, replace Q3 with Q8E on model numbers (example, SGE3-533Q8E) and Q83 with Q88E on pair model numbers (example, SGP3-533Q88E). A model with a QD requires a mating cable (see page 178). A pair includes an emitter and receiver (example, SGP3-533Q83). Emitters (example, SGE3-533Q3) and receivers (example, SGR3-533Q8) are also sold separately. More information online at bannerengineering.com 29 SAFETY LIGHT SCREENS EZ-SCREEN(R) PICO-GUARDTM MICRO-SCREEN(R) EZ-SCREEN(R) Grid & Point Interfacing Products Models Interface Modules SAFETY LIGHT SCREENS EZ-SCREEN(R) Systems Description IM-T-9A (3 NO) IM-T-11A (2 NO/1 NC) * Interface modules provide two or three normally open force-guided relay outputs rated at 6 A. * EZ-SCREEN monitors these interface modules when they are connected to the EZ-SCREEN External Device Monitoring (EDM) inputs. * Convenient plug-in terminal blocks on a 22.5 mm DIN-rail mountable housing are included. Download PDF Product Data Sheet Page 132 62822 MM-TA-12B MMD-TA-12B Receiver AC Interface Boxes Emitter AC Interface Boxes MMD-TA-11B EZAC-R9-QE8 EZAC-E-QE8 Page 123 * Versatile power supplies allow EZ-SCREEN systems to connect to AC power sources. * Models are available to accommodate receivers only, emitters only, or both. * Receiver models include 8 amp safety relay output. Page 184 120321 * Pairs of contactors create safety stop circuits with two normally open contacts in series. * EZ-SCREEN can monitor the circuit because of the contacts' force-guided mechanically linked design. * Contactors add 10 or 16 amp current carrying capability to any safety system. * Auxiliary contacts add 3 or 4 normally open contacts. * Suppressors extend the life of an actuating device that uses a contactor. * Modular design simplifies assembly and installation. Page 186 111881 116390 EZAC-R15A-QE8-QS83 EZAC-R8N-QE8-QS53 EZAC-R10N-QE8-QS53 EZAC-E-QE5 EZAC-E-QE8-QS3 EZAC-E-QE5-QS5 11-BG00-31-D-024 11-BF16C01-024 Aux. Contacts 11-BGX10-40 11-G484-30 Suppressors 11-BGX77-048 11-G318-48 30 63517 * The Muting Module temporarily inhibits a safety light screen so materials can safely pass through the screen without stopping the machinery. * The module uses redundant microcontrollerbased logic. EZAC-R11-QE8 Mechanically Linked Contactors Contactors EZ-SCREEN(R) TYPE 2 Muting Modules MINI-SCREEN(R) More information online at bannerengineering.com SAFETY LIGHT SCREENS (R) EZ-SCREEN Systems You can purchase a kit that contains an emitter and receiver of equal length and beam spacing; brackets; and optional interfacing solution and quick-disconnect cables. Detailed information about individual kit components is as follows. * Emitter and Receivers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 28 * Interfacing Options. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 SAFETY LIGHT SCREENS EZ-SCREEN(R) Grid Kits EZ-SCREEN(R) * Cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .178 & 179 PICO-GUARDTM * Brackets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 190 MICRO-SCREEN(R) SGK3-400Q83-1RE25 SGXLK3-400Q83-1RE25 SGK3-533Q83-1RE25 400 mm SGK2-584Q83-1RE25 800 mm 533 mm 1066 mm SGK2-500Q83-1RE25 SGXLK2-584Q83-1RE25 900 mm 3 SGXLK3-533Q83-1RE25 SGXLK2-500Q83-1RE25 300 mm 500 mm 500 mm 584 mm 584 mm 2 QD Ca bling In t er f Op tionacing s Trip/Latch Selectable E mi t t e Re c ei r & C onnev er c t io n 2 OSSD s S u p pl Vol t agy e Ou t pu Op tiont 4 N o. o f Ou t pu ts SGXLK4-300Q83-1RE25 Range B e am Spaci ng s SGK4-300Q83-1RE25 Beam Kit Model Number P r o t ec H eig h t e d t A partial listing of kits is listed below; see Kit Model Key to order other variations. 20 m 70 m 20 m 70 m 20 m 70 m 24V dc Integral Mini QD without Test IM-T-9A, 1 each 8 m, 2 each 20 m 70 m 20 m 70 m Kit Model Key Model Style Kit No. of Beams Beam Spacing QD Options Interfacing Options QD Cabling Length Options S G K 4 3 0 0 Q 8 3 1 R E 2 5 Model Style SG = Safety Grid SGXL = Safety Grid Long Range Kit K = Kit QD Cabling Length Options RE15 = 5 m, 2 each RE25 = 8 m, 2 each R15E25 = 5 m (Receiver) & 8 m (Emitter) R25E15 = 8 m (Receiver) & 5 m (Emitter) RE50 = 15 m, 2 each R15E50 = 5 m (Receiver) & 15 m (Emitter) R50E15 = 15 m (Receiver) & 5 m (Emitter) R25E50 = 8 m (Receiver) & 15 m (Emitter) R50E25 = 15 m (Receiver) & 8 m (Emitter) RE75 = 23 m, 2 each RE100 = 30 m, 2 each No. of Beams 2 = two beams 3 = three beams 4 = four beams Beam Spacing 300 mm 400 mm 500 mm 533 mm 584 mm Receiver & Emitter QD Options Blank = Receiver and emitter with wiring terminal chamber Q85 = Receiver with integral 8-pin Mini-style QD Emitter with integral 5-pin Mini-style QD with Test Q83 = Receiver with integral 8-pin Mini-style QD Emitter with integral 3-pin Mini-style QD Q88E = Receiver and emitter with integral 8-pin Euro-style QD Interfacing Options 1 = IM-T-9A Interface Module, 1 each 2 = IM-T-11A Interface Module, 1 each 3 = 11-BG00-31-D-024 Contactors (10A), 2 each 4 = 11-BF16C01-024 Contactors (16A), 2 each NOTE: Not all combinations are possible. Contact Banner Engineering Corp. for additional information and/or verification of valid kit model numbers. More information online at bannerengineering.com 31 MINI-SCREEN(R) EZ-SCREEN(R) TYPE 2 SAFETY LIGHT SCREENS SAFETY LIGHT SCREENS EZ-SCREEN(R) Systems EZ-SCREEN(R) Point Kits You can purchase a kit that contains an emitter and receiver of equal length; brackets; and optional interfacing solution and quick-disconnect cables. Detailed information about individual kit components is as follows. * Emitter and Receivers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 28 * Interfacing Options. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 EZ-SCREEN(R) * Cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .178 & 179 PICO-GUARDTM * Brackets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 190 MICRO-SCREEN(R) 20 m SPK1-Q83-1RE25 24V dc 70 m SPXLK1-Q83-1RE25 2 OSSD Trip/Latch Selectable Integral Mini QD without Test IM-T-9A, 1 each Kit Model Key Model Style Kit No. of Beams QD Options Interfacing Options QD Cabling Length Options S P K 1 Q 8 3 1 R E 2 5 Model Style SP = Safety Point SPXL = Safety Point Long Range Kit K = Kit No. of Beams 1 = one beam Receiver & Emitter QD Options Blank = Receiver and emitter with wiring terminal chamber Q85 = Receiver with integral 8-pin Mini-style QD Emitter with integral 5-pin Mini-style QD with Test Q83 = Receiver with integral 8-pin Mini-style QD Emitter with integral 3-pin Mini-style QD QD Cabling Length Options RE15 = 5 m, 2 each RE25 = 8 m, 2 each R15E25 = 5 m (Receiver) & 8 m (Emitter) R25E15 = 8 m (Receiver) & 5 m (Emitter) RE50 = 15 m, 2 each R15E50 = 5 m (Receiver) & 15 m (Emitter) R50E15 = 15 m (Receiver) & 5 m (Emitter) R25E50 = 8 m (Receiver) & 15 m (Emitter) R50E25 = 15 m (Receiver) & 8 m (Emitter) RE75 = 23 m, 2 each RE100 = 30 m, 2 each Q88E = Receiver and emitter with integral 8-pin Euro-style QD Interfacing Options 1 = IM-T-9A Interface Module, 1 each 2 = IM-T-11A Interface Module, 1 each 3 = 11-BG00-31-D-024 Contactors (10A), 2 each 4 = 11-BF16C01-024 Contactors (16A), 2 each NOTE: Not all combinations are possible. Contact Banner Engineering Corp. for additional information and/or verification of valid kit model numbers. 32 More information online at bannerengineering.com QD Ca bling In t er f Op tionacing s Ou t pu Op tiont s N o. o f Ou t pu ts N/A S u p pl Vol t agy e Kit Model Number Range B e am Spaci ng 1 s EZ-SCREEN(R) TYPE 2 Beam MINI-SCREEN E mi t t e Re c ei r & C onnev er c t io n A partial listing of kits is listed below; see Kit Model Key to order other variations. (R) 8 m, 2 each SAFETY LIGHT SCREENS (R) EZ-SCREEN Systems SAFETY LIGHT SCREENS EZ-SCREEN(R) 14 & 30 mm Resolution Specifications Supply Voltage at the Device* 24V dc 15% (SELV), 10% max. ripple Supply Current Emitter: 100 mA max. Receiver: 275 mA max., exclusive of OSSD1 and OSSD2 loads (up to an additional 0.5A each) Response Time 9 to 56 millesconds Cascade Safety Stop Interface (CSSI): 40 milliseconds max. Remote Test Input (Optional - available only on model SLSE..-..Q5 emitters) Test Mode is activated either by applying a low signal (less than 3V dc) to emitter TEST #1 terminal for a minimum of 50 milliseconds, or by opening a switch connected between TEST #1 and TEST #2 for a minimum of 50 milliseconds. Beam scanning stops to simulate a blocked condition. A high signal at TEST #1 deactivates Test Mode. (See p/n 112852 for more information.) High signal: 10 to 30V dc Low signal: 0 to 3V dc Input current: 35 mA inrush, 10 mA max. Wavelength of Emitter Elements Infrared LEDs, 950 nm at peak emission EDM Input +24V dc signals from external device contacts can be monitored (one-channel, two-channel or no monitoring) via EDM1 and EDM2 terminals in the receiver. Monitored devices must respond within 200 milliseconds of an output change. High signal: 10 to 30V dc at 30 mA typical Low signal: 0 to 3V dc Dropout time: 200 milliseconds max. Reset Input The Reset input must be high for 0.25 to 2 seconds and then low to reset the receiver. High signal: 10 to 30V dc at 30 mA typical Low signal: 0 to 3V dc Closed switch time: 0.25 to 2 seconds Safety Outputs Two redundant solid-state 24V dc, 0.5 A max. sourcing OSSD (Output Signal Switching Device) safety outputs. (Use optional interface modules for ac or larger dc loads.) Capable of the Banner "Safety Handshake". ON-State voltage: Vin-1.5V dc OFF-State voltage: 1.2V dc max. (0-1.2V dc) Max. load capacitance: 1.0 F Max. load inductance: 10 H Leakage current: 0.50 mA maximum Cable resistance: 10 maximum OSSD test pulse width: 100 to 300 microseconds OSSD test pulse period: 5 to 27 milliseconds (varies with number of beams) Switching current: 0-0.5 A Controls and Adjustments Emitter: Scan Code selection: 2-position switch (code 1 or 2). Factory default position is code 1. Receiver: Scan Code selection: 2-position switch (code 1 or 2). Factory default position is code 1. Trip/Latch Output selection: Redundant switches. Factory default position is T (Trip). EDM/MPCE monitor selection: 2-position switch selects between 1- or 2-channel monitoring. Factory default position is 2. Reduced Resolution (2-beam Floating Blanking): Redundant switches to enable. Factory default is OFF. Short Circuit Protection All inputs and outputs are protected from short circuits to +24V dc or dc common* Electrical Safety Class (IEC 61140: 1997) III Safety Rating Type 4 per IEC 61496-1, -2; Category 4 per ISO 13849-1 (EN 954-1) Operating Range 14 mm models: 0.1 m to 6 m 30 mm models: 0.1 m to 18 m Range decreases with use of mirrors and/or lens shields: Lens shields - approximately 10% less range per shield. Glass-surface mirrors - approximately 8% less range per mirror. See Accessory section for more information on a specific mirror, page 204. Ambient Light Immunity > 10,000 lux at 5 angle of incidence Effective Aperture Angle (EAA) Meets Type 4 requirements per IEC 61496-2, 2.5 @ 3 m *The external voltage supply must be capable of buffering brief mains interruptions of 20 milliseconds, as specified in IEC/EN 60204-1. More information online at bannerengineering.com 33 EZ-SCREEN(R) PICO-GUARDTM MICRO-SCREEN(R) MINI-SCREEN(R) EZ-SCREEN(R) TYPE 2 SAFETY LIGHT SCREENS SAFETY LIGHT SCREENS EZ-SCREEN(R) Systems (R) EZ-SCREEN 14(R) & Resolution Specifications (cont'd) EZ-SCREEN 1430 & mm 30 mm Resolution Specifications Enclosure Materials: Extruded aluminum housing with yellow polyester powder or nickel-plated finish and well-sealed, rugged die-cast zinc end caps, acrylic lens cover, copolyester access cover Rating: IEC IP65 Operating Conditions Temperature: 0 to +55 C Status Indicators Emitter: One Bi-color (Red/Green) Status Indicator - indicates operating mode, Lockout or power OFF condition 7-segment Diagnostic Indicator (1 digit) - indicates proper operation, scan code or error code EZ-SCREEN(R) Relative humidity: 95% (non-condensing) PICO-GUARDTM Receiver: Yellow Reset Indicator - indicates whether system is ready for operation or requires a reset Bi-Color (Red/Green) Status Indicator - indicates general system and output status Bi-Color (Red/Green) Zone Status Indicators - indicates condition (clear or blocked beam) of a defined group of beams 7-Segment Diagnostic Indicator (3-digit) - indicates proper operation, scan code or error code, total number of blocked beams MICRO-SCREEN(R) MINI-SCREEN(R) EZ-SCREEN(R) TYPE 2 Mounting Hardware Emitter and receiver each are supplied with a pair of swivel end-mounting brackets. Models longer than 900 mm also include a swivel center-mount bracket. Mounting brackets are 8-gauge cold-rolled steel, black zinc finish. Shock and Vibration EZ-SCREEN systems have passed vibration and shock tests according to IEC 61496-1. This includes vibration (10 cycles) of 10-55 Hz at 0.35 mm single amplitude (0.70 mm peak-to-peak) and shock of 10 g for 16 milliseconds (6,000 cycles). Certifications For a list of certifications see page 236. Wiring Diagrams WD001, WD002, WD003, WD004, WD009, WD010, WD011, WD012, WD013, WD014, WD015, WD016 (pp. 246-254) EZ-SCREEN(R) Grid & Point Specifications Supply Voltage (V in) 24V dc 15%, 10% max. ripple Supply Current Emitter: 150 mA max. Receiver: 500 mA max., exclusive of OSSD1 and OSSD2 loads (up to an additional 0.5A each) Short Circuit Protection All inputs and outputs are protected from short circuits to +24V dc or dc common (except Emitter AUX power connections) Response Time 24 milliseconds or less from interruption of light grid beam to safety outputs going to OFF-state Safety Rating Type 4 per IEC 61496-1, -2; Category 4 per ISO 13849-1 (EN 954-1) EDM Input +24V dc signals from external device contacts can be monitored (single-channel, dual-channel or no monitoring) via EDM1 and EDM2 terminals in the receiver. Monitored devices must respond within 200 milliseconds of an output change. Reset Input The Reset input must be high (10 to 30V dc at 30 mA) for 0.25 to 2 seconds and then low (less than 3V dc) to reset the receiver. Remote Test Input Test mode is activated either by applying a low signal (less than 3V dc) to emitter TEST1 terminal for a minimum of 50 milliseconds, or by opening a switch connected between TEST1 and TEST2 terminals for a minimum of 50 milliseconds. Beam scanning stops to simulate a blocked condition. A high signal (10 to 30V dc, 35 mA inrush, 10 mA max.) at TEST1 terminal deactivates Test mode and allows the emitter to operate normally. TEST1 and TEST2 are factory jumpered. Safety Outputs Two diverse-redundant solid-state 24V dc, 0.5 A max. sourcing OSSD (Output Signal Switching Device) safety outputs. (Use optional interface modules for ac or larger dc loads.) ON-State voltage: Vin-1.5V dc OFF-State voltage: 1.2V dc max. Max. load resistance: 1000 ohm Max. load capacitance: 0.1 F Controls and Adjustments Emitter: Scan code selection: 2-position switch (code 1 or 2). Factory default position is 1. Receiver: Scan code selection: 2-position switch (code 1 or 2). Factory default position is 1. Trip/latch output selection: redundant switches. Factory default position is L (latch) EDM/MPCE monitor selection: redundant switches select between 1- or 2-channel monitoring. Factory default position is 2. 34 More information online at bannerengineering.com SAFETY LIGHT SCREENS (R) EZ-SCREEN Systems SAFETY LIGHT SCREENS (R) EZ-SCREEN Grid(R) Grid & Point Specifications (cont'd) EZ-SCREEN & Point Specifications Emitter/Receiver Operating Range Short-range models: 0.8 m to 20 m Long-range models: 15 m to 70 m Range decreases with use of mirrors and/or lens shields. Beam Spacing Model SG...4-300: 300 mm Model SG...3-400: 400 mm Model SG...2-500: 500 mm Model SG...3-533: 533.4 mm Model SG...2-584: 584.2 mm EZ-SCREEN(R) PICO-GUARDTM Beam Diameter 25 mm Ambient Light Immunity > 10,000 lux at 5 angle of incidence Strobe Light Immunity Totally immune to one Federal Signal Corp. "Fireball" model FB2PST strobe Emitter Elements Infrared LEDs, 880 nm at peak emission Effective Aperture Angle (EAA) Meets Type 4 requirements per IEC 61496-2 Short-range models: 2.5 @ 3 m MICRO-SCREEN(R) MINI-SCREEN(R) EZ-SCREEN(R) TYPE 2 Long-range models: 2.5 @ 15 m Enclosure Materials: Extruded aluminum housings with yellow polyester powder finish and well-sealed, rugged molded PBT end caps, acrylic lens cover Rating: NEMA 4, 13; IEC IP65 Operating Conditions Temperature: 0 to +50 C Shock and Vibration EZ-SCREEN systems have passed vibration and shock tests according to IEC 61496-1 and -2. This includes vibration (10 cycles) of 10-55 Hz at 0.35 mm single amplitude (0.70 mm peak-to-peak) and shock of 10 g for 16 milliseconds (6,000 cycles). Status Indicators 7-Segment Diagnostic Indicators, Both Emitter and Receiver Dash (-) = System is OK Error Codes = See product manuals (p/n 68410 or 68413) for code definitions and recommended action Scan code setting = Appears during power-up or after scan code is changed. (C1 or C2) (Temporary indication; normal display resumes within a few seconds.) Emitter: One bi-color (red/green) Status indicator Green steady = RUN mode Green single flashing = TEST mode Red single flashing = Lockout OFF = No power to sensor Relative humidity: 95% (non-condensing) Receiver: Two System Status indicators, plus one bi-color (red/green) Beam Status indicator for each beam Yellow Reset Indicator ON steady = RUN mode Double flashing = Waiting for manual reset after power-up Single flashing = Waiting for manual latch reset OFF = No power to sensor or system is not ready for operation Bi-Color (Red/Green) Status Indicator Green steady = Outputs ON Red steady = RUN mode, outputs OFF Red single flashing = Lockout OFF = No power to sensor or system is not ready for operation Bi-Color (Red/Green) Beam Status Indicators Green steady = Clear beam, strong signal Green flickering = Clear beam, weak signal Red steady = Beam blocked OFF = No power to sensor or no scanning Mounting Hardware Emitter and receiver each are supplied with a pair of swivel end mounting brackets. Mounting brackets are 8-gauge cold-rolled steel, black zinc finish. Cables and Connections Cables are user-supplied. Wiring terminals accommodate one 22 to 16 ga. wire or two wires up to 18 ga.; Pg13.5 wiring chamber access port capacity varies, depending on cable gland or strain relief fitting used. Supplied cable gland is for a cable diameter of 6 to 12 mm. Certifications For a list of certifications see page 236. Wiring Diagrams WD005, WD006, WD007, WD008, WD009, WD010, WD011, WD012, WD013, WD014, WD015, WD016 (pp. 248-254) More information online at bannerengineering.com 35 SAFETY LIGHT SCREENS SAFETY LIGHT SCREENS PICO-GUARDTM Grid & Point Systems EZ-SCREEN(R) PICO-GUARDTM MICRO-SCREEN(R) MINI-SCREEN(R) EZ-SCREEN(R) TYPE 2 TM PICO-GUARD Grids & Points * Fiber optic elements are for use with PICO-GUARD Controllers and fiber optic cables in personnel safety and equipment-protection applications. * Choices include compact 12 or 30 mm non-contact fiber optic Point elements, or Grid systems for perimeter and access guarding. * Each fiber optic channel uses one Grid or Point pair (up to 4 pairs per controller). * Grid system features rugged anodized aluminum construction, with 2, 3 or 4 beams and beam spacing from 300 to 584 mm. * Each Point or Grid element can function as emitter or receiver, depending on installation. * 12 mm Point has impact-resistant polycarbonate plastic construction. * 30 mm Point has robust 304 stainless steel housing with tempered glass lens window. #!",% ',!.$3 PAGE 189 BRACKETS PAGE 190 -)22/23 PAGE 204 34!.$3 PAGE 209 * Models are available for use with three types of integral plastic optical fiber, in four lengths. * Environmental rating is IEC IP65 for Grids and IP67 for Points. * Grids and Points meet Type 4 per IEC 61496-2 and Safety Category 4 per ISO 13849-1 applications when used with a PICO-GUARD controller. * Multiple mounting bracket options allow easy installation. * Grid and Points are ATEX and FM approved for use in explosive environments when used with a PICO-GUARD controller. Grid Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 37 12 mm Point Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38 30 mm Point Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38 36 More information online at bannerengineering.com SAFETY LIGHT SCREENS TM (R) PICO-GUARD EZ-SCREEN Grid &Systems Point Systems Two-, three- or four-beam models 55.0 mm Polished-end 7 mm PVC-coated integral fiber cable Detailed Dimensions Full View SAFETY LIGHT SCREENS PICO-GUARDTM Grid Systems IEC IP65 rated EZ-SCREEN(R) Robust black anodized housing with field replaceable window PICO-GUARDTM MEK-resistant housing for paint booth applications MICRO-SCREEN(R) Optional MEK-resistant conduit and cable gland (see page 189) L MINI-SCREEN(R) EZ-SCREEN(R) TYPE 2 Interchangeable as emitter or receiver with PICO-GUARD controller A complete system requires a controller (see page 108) 52.0 mm PICO-GUARD Grid Black Anodized Aluminum TM PICO-GUARD Grid Systems Fiber Length Maximum Range*** SFG4-300C8 2.4 m 31 m SFG4-300C15 4.5 m 27 m 7.5 m 23 m 15 m 15 m SFG4-300C100 30 m 7.0 m SFG3-400C8 2.4 m 31 m 4.5 m 27 m 7.5 m 23 m 15 m 15 m SFG3-400C100 30 m 7.0 m SFG3-533C8 2.4 m 31 m SFG3-533C15 4.5 m 27 m 7.5 m 23 m 15 m 15 m 30 m 7.0 m Model* Beam Spacing SFG4-300C25 SFG4-300C50 Protected Height Download PDF 900 mm Housing Length (L) 1084 mm 300 mm SFG3-400C15 800 mm SFG3-400C25 SFG3-400C50 984 mm 400 mm 1066 mm SFG3-533C25 SFG3-533C50 Fiber Description** Integral Polished-End, PVC Coated Fibers 7 mm diameter 1251 mm 533 mm SFG3-533C100 Data Sheet 69762 4-Beam Grid 3-Beam Grid * Order any two Grid optical elements with the same housing length. ** MEK-resistant conduit is available to protect fiber (see page 189). *** Maximum range is based on using an emitter and receiver with the same length fiber. Using an emitter and receiver with different length fibers may decrease or increase range. Using corner mirrors reduces range. See specifications on page 41 for detailed range information. More information online at bannerengineering.com 37 SAFETY LIGHT SCREENS SAFETY LIGHT SCREENS PICO-GUARDTM Grid & Point Systems EZ-SCREEN(R) PICO-GUARDTM MICRO-SCREEN(R) PICO-GUARDTM Grid Systems (cont'd) Fiber Length Maximum Range*** SFG2-500C8 2.4 m 31 m SFG2-500C15 4.5 m 27 m 7.5 m 23 m 15 m 15 m 30 m 7.0 m 2.4 m 31 m 4.5 m 27 m 7.5 m 23 m 15 m 15 m 30 m 7.0 m Model* Beam Spacing Protected Height 500 mm SFG2-500C25 SFG2-500C50 Housing Length (L) EZ-SCREEN(R) TYPE 2 Fiber Description** 684 mm 500 mm Integral Polished-End, PVC Coated Fibers 7 mm diameter SFG2-500C100 SFG2-584C8 MINI-SCREEN(R) Download PDF SFG2-584C15 584 mm SFG2-584C25 SFG2-584C50 768 mm 584 mm SFG2-584C100 Data Sheet 69762 2-Beam Grid * Order any two Grid optical elements with the same housing length. ** MEK-resistant conduit is available to protect fiber (see page 189). *** Maximum range is based on using an emitter and receiver with the same length fiber. Using an emitter and receiver with different length fibers may decrease or increase range. Using corner mirrors reduces range. See specifications on page 41 for detailed range information. PICO-GUARDTM Point Systems 12 or 30 mm threaded barrel fiber optic interchangeable as emitter or receiver with PICO-GUARD controller Detailed Dimensions o 30.0 mm o 12.0 mm Multiple Points create customized grid system Polished-end coated integral fiber Moisture and dirt resistant 304 stainless steel (30 mm) or impact-resistant polycarbonate (12 mm) housing 77.7 mm 46.4 mm Type 4 effective aperture angle (EAA) IEC IP67 rated A complete system requires a controller (see page 108) 38 More information online at PICO-GUARD Point (30 mm Barrel) bannerengineering.com PICO-GUARD Point (12 mm Barrel) SAFETY LIGHT SCREENS TM (R) PICO-GUARD EZ-SCREEN Grid &Systems Point Systems Fiber Length Maximum Range** 2.4 m 29 m 4.5 m 24 m 7.5 m 22 m 15 m 14 m SFP30SXP100 30 m 8.5 m SFP30SXT8 2.4 m 29 m 4.5 m 24 m 7.5 m 22 m 15 m 14 m 30 m 8.5 m 2.4 m 29 m 4.5 m 24 m 7.5 m 22 m 15 m 14 m 30 m 8.5 m 2.4 m 6.4 m 4.5 m 4.8 m 7.5 m 3.4 m 15 m 1.5 m 2.4 m 6.4 m 4.5 m 4.8 m 7.5 m 3.4 m 15 m 1.5 m 2.4 m 6.4 m 4.5 m 4.8 m 7.5 m 3.4 m 15 m 1.5 m Model* Housing Material Download PDF Orientation/Type Fiber Description SFP30SXP8 SFP30SXP15 Integral Polished-End, PVC Coated Fibers 5 mm Diameter SFP30SXP25 SFP30SXP50 SFP30SXT15 SFP30SXT25 SFP30SXT50 304 Stainless Steel SFP30SXT100 Straight 30 mm Barrel Mounting (25 mm beam diameter) Integral Polished-End, PTFE Coated Fibers 2.2 mm Diameter SFP30SS8 Integral Polished-End, Polyetheylene Coated Fibers 2.2 mm Diameter SFP30SS15 SFP30SS25 SFP30SS50 SFP30SS100 SFP12PXP8 Integral Polished-End, PVC Coated Fibers 5 mm Diameter SFP12PXP15 SFP12PXP25 SFP12PXP50 SFP12PXT8 SFP12PXT15 SFP12PXT25 SFP12PXT50 SFP12PS8 SFP12PS15 SFP12PS25 SFP12PS50 Plastic Straight 12 mm Barrel Mounting (9 mm beam diameter) Integral Polished-End, PTFE Coated Fibers 2.2 mm Diameter Integral Polished-End, Polyethylene Coated Fibers 2.2 mm Diameter Data Sheet EZ-SCREEN(R) PICO-GUARDTM MICRO-SCREEN(R) MINI-SCREEN(R) EZ-SCREEN(R) TYPE 2 111390 111389 * Order any two Point optical elements with the same beam diameter. ** Maximum range is based on using an emitter and receiver with the same length fiber. Using an emitter and receiver with different length fibers may decrease or increase range. Using corner mirrors reduces range. See specifications on page 41 for detailed range information. More information online at SAFETY LIGHT SCREENS PICO-GUARDTM Point Systems bannerengineering.com 39 SAFETY LIGHT SCREENS SAFETY LIGHT SCREENS PICO-GUARDTM Grid & Point Systems PICO-GUARDTM Controller (required for a complete system) Models Description Download PDF Product Information Data Sheet Page 108 69761 * The four-optical-channel controller is available with or without auxiliary channel outputs. PICO-GUARDTM * Two dual-channel Universal Safety Stop Interface (USSI) inputs can connect to other safeguarding devices or controllers. MICRO-SCREEN(R) * Two solid-state diverse-redundant 0.5 A maximum safety outputs (OSSDs). EZ-SCREEN(R) SFCDT-4A1 * Redundant DIP switches determine whether power-up is auto or manual and whether output operation is trip or latch. MINI-SCREEN(R) EZ-SCREEN(R) TYPE 2 SFCDT-4A1C * Optional external device monitoring (EDM) allows the system to monitor the status of external devices such as MPCEs. * If not needed, up to three optical channels can be disabled. PICO-GUARDTM Interfacing Products Muting Modules Interface Modules Models Description IM-T-9A (3 NO) IM-T-11A (2 NO/1 NC) MM-TA-12B MMD-TA-12B MMD-TA-11B Mechanically Linked Contactors 11-BG00-31-D-024 Contactors 11-BF16C01-024 Aux. Contacts 11-BGX10-40 11-G484-30 Suppressors 11-BGX77-048 * Interface modules provide two or three normally open force-guided relay outputs rated at 6 A. * PICO-GUARD monitors these interface modules when they are connected to the PICO-GUARD External Device Monitoring (EDM) inputs. * Convenient plug-in terminal blocks on a 22.5 mm DIN-rail mountable housing are included. More information online at Product Information Data Sheet Page 132 62822 63517 * The Muting Module can be used with PICO-GUARD systems and can temporarily inhibit a Grid or Point so materials can safely pass through the beams without stopping the machinery. * The module uses redundant microcontrollerbased logic. Page 123 * Pairs of contactors create safety stop circuits with two normally open contacts in series. * PICO-GUARD can monitor the circuit because of the contacts' force-guided mechanically linked design. * Contactors add 10 or 16 amp current carrying capability to any safety system. * Auxiliary contacts add 3 or 4 normally open contacts. * Suppressors extend the life of an actuating device that uses a contactor. * Modular design simplifies assembly and installation. Page 186 11-G318-48 40 Download PDF bannerengineering.com 116390 111881 SAFETY LIGHT SCREENS TM (R) PICO-GUARD EZ-SCREEN Grid &Systems Point Systems Range information is based on use of the integral polished fibers. The use of SFA-FS Fiber Splice reduces range by 20%. Do not cut polished fiber ends unless absolutely necessary (if the end is damaged or contaminated, or must be cut to length). Use only the Model PFC-2 Fiber Cutter to cut fibers, when necessary. If a polished end is cut, the excess gain is reduced, the advantage of polishing is lost, and the operating range is reduced. Operating Range 12 mm Point: Minimum operating range: 150 mm Maximum operating range: see table at right 12 mm Point Maximum Operating Range SFP12..8 SFP12..15 SFP12..25 SFP12..50 SFP12..8 6.4 m 5.5 m 4.6 m 3m SFP12..15 5.5 m 4.8 m 4m 2.7 m SFP12..25 4.6 m 4m 3.4 m 2.1 m 30 mm Point Maximum Operating Range Grids: Minimum operating range: 800 mm Maximum operating range: see table at right Grid Maximum Operating Range SFP30..8 SFP30..15 SFP30..25 SFP30..50 SFP30..100 SFG..8 SFG..15 SFG..25 SFG..50 SFG..100 SFP30..8 28.7 m 25.9 m 23.2 m 20.1 m 13.7 m SFG..8 31.1 m 29.0 m 26.5 m 21.6 m 14.9 m SFP30..15 25.9 m 24.4 m 22.9 m 19.5 m 12.8 m SFG..15 29.0 m 27.1 m 24.7 m 20.1 m 14.0 m SFP30..25 23.2 m 22.9 m 21.9 m 17.1 m 12.2 m SFG..25 26.5 m 24.7 m 22.6 m 18.3 m 12.8 m EZ-SCREEN(R) SFP12..50 3m 2.7 m 2.1 m 1.5 m 30 mm Point: Minimum operating range: 800 mm Maximum operating range: see table at right PICO-GUARDTM MICRO-SCREEN(R) MINI-SCREEN(R) SFP30..50 20.1 m 19.5 m 17.1 m 14.0 m 11.0 m SFP30..100 13.7 m 12.8 m 12.2 m 11.0 m 8.5 m SFG..50 21.6 m 20.1 m 18.3 m 14.9 m 10.4 m SFG..100 14.9 m 14.0 m 12.8 m 10.4 m 7.0 m EZ-SCREEN(R) TYPE 2 Beam Diameter 12 mm Point: 9 mm 30 mm Point: 25 mm Grids: 25 mm Effective Aperture Angle (EAA) Type 4 per IEC 61496-2; 2.5 @ 3 m when used with SFCDT-.. Environmental Rating Points: IEC IP67 Grids: IEC IP65 Operating Conditions Temperature: 0 to +70 C Construction 12 mm Point: black polycarbonate plastic housing; polyethylene, PVC or PTFE coated fibers 30 mm Point: 304 stainless steel housing, glass window; polyethylene, PVC or PTFE coated fibers Grids: black anodized aluminum housing and label; tempered glass window; zinc end caps; PVC coated fibers Certifications For a list of certifications see page 236. Relative humidity: 95% (non-condensing) PICO-GUARDTM Fiber Optic Controller Specifications See page 110. More information online at SAFETY LIGHT SCREENS PICO-GUARDTM Grid & Point Systems Specifications bannerengineering.com 41 SAFETY LIGHT SCREENS SAFETY LIGHT SCREENS MICRO-SCREEN(R) Systems MICRO-SCREEN(R) Safety Light Screens * Family is designed for light- to medium-duty production machinery. (R) EZ-SCREEN * Full system includes emitter, receiver, controller and interconnecting cables. Order QD cable separately. PICO-GUARDTM MICRO-SCREEN(R) QD CABLES 5-Pin Euro (R) MINI-SCREEN PAGE 175 EZ-SCREEN(R) TYPE 2 ).$)#!4/23 PAGE 187 BRACKETS PAGE 190 -)22/23 * Emitters and receivers feature ultra-compact housing with 19 or 32 mm resolution. * Optional ESD-resistant housing is available. * System includes floating blanking (one or two beam), selectable auto power-up, E-stop input and optional fixed blanking with push-button TEACH mode programming. * Controllers offered with DeviceNetTM or muting PAGE 204 34!.$3 DeviceNetTM is a trademark of Rockwell Automation. PAGE 209 ,%.3 3()%,$3 PAGE 213 %.#,/352%3 PAGE 217 MICRO-SCREEN 19 mm Emitters & Receivers. . . .Page 43 MICRO-SCREEN 32 mm Emitters & Receivers. . . . . . . . 44 MICRO-SCREEN Metal Box Controllers . . . . . . . . . . . . . 45 MICRO-SCREEN DIN Module Controllers . . . . . . . . . . . . 46 MICRO-SCREEN Interfacing Products . . . . . . . . . . . . . . 48 MICRO-SCREEN(R) Emitters & Receivers Ultra-compact housing to fit existing machinery 31.8 mm Detailed Dimensions Swivel bracket for easy alignment Full View of Available Finishes Twelve heights for Standard Series; seven for V Series 5-pin Euro QD connection standard QDU-... 5-pin Euro QD cables with "twisted pair" (see page 175) L NEMA 4, 13; IEC IP65 housing 25.4 mm MICRO-SCREEN Emitters & Receivers 42 More information online at bannerengineering.com Yellow Painted Aluminum Nickel-Plated ESD SAFETY LIGHT SCREENS MICRO-SCREEN(R) Systems Defined Area Housing Length (L) USE424Y USR424Y 102 mm 137 mm USE824Y USR824Y 203 mm 239 mm Model* Resolution Download PDF Range Connection** Data Sheet SAFETY LIGHT SCREENS MICRO-SCREEN(R) Series, Emitters & Receivers - 19 mm Resolution EZ-SCREEN(R) PICO-GUARDTM MICRO-SCREEN(R) USE1224Y USR1224Y 305 mm 340 mm USE1624Y USR1624Y 406 mm 442 mm USE2024Y USR2024Y 508 mm 544 mm USE2424Y USR2424Y 610 mm 645 mm MINI-SCREEN(R) EZ-SCREEN(R) TYPE 2 9m USE2824Y USR2824Y 711 mm 747 mm USE3224Y USR3224Y 813 mm 848 mm USE3624Y USR3624Y 914 mm 950 mm USE4024Y USR4024Y 1016 mm 1052 mm USE4424Y USR4424Y 1118 mm 1153 mm USE4824Y USR4824Y 1219 mm 1255 mm 19 mm Resolution 5-Pin Euro QD 48753 19 mm Resolution * Nickel-plated emitters and receivers used for ESD safe applications are available. Replace "Y" with "N" in the model number (example, USE424N). ** For a 7.6 m integral cable, add I to model number (example, USE424YI). For a 300 mm 5-Pin Euro Pigtail QD, add P2 to model number (example, USE424YP2). A model with a QD requires a mating cable (see page 175). Note: Emitters (example, USE424Y) and receivers (example, USR424Y) are sold separately. More information online at bannerengineering.com 43 SAFETY LIGHT SCREENS SAFETY LIGHT SCREENS MICRO-SCREEN(R) Systems EZ-SCREEN(R) PICO-GUARDTM MICRO-SCREEN(R) V-Series, Emitters & Receivers - 32 mm Resolution Defined Area Housing Length (L) USE2412Y USR2412Y 610 mm 645 mm USE3212Y USR3212Y 813 mm 848 mm USE4012Y USR4012Y 1016 mm 1052 mm USE4812Y USR4812Y 1219 mm 1255 mm USE5612Y USR5612Y 1422 mm 1458 mm USE6412Y USR6412Y 1626 mm 1661 mm USE7212Y USR7212Y 1829 mm 1864 mm Model* Resolution Download PDF Range Connection** Data Sheet 9m 5-Pin Euro QD 48753 (R) MICRO-SCREEN MINI-SCREEN(R) EZ-SCREEN(R) TYPE 2 32 mm Resolution 32 mm Resolution * Nickel-plated emitters and receivers used for ESD safe applications are available. Replace "Y" with "N" in the model number (example, USE2412N). ** For a 7.6 m integral cable, add I to model number (example, USE2412YI). For a 300 mm 5-Pin Euro Pigtail QD, add P2 to model number (example, USE2412YP2). A model with a QD requires a mating cable (see page 175). Note: Emitters (example, USE2412Y) and receivers (example, USR2412Y) are sold separately. 44 More information online at bannerengineering.com SAFETY LIGHT SCREENS MICRO-SCREEN(R) Systems Welded steel box with polyester powder paint finish Detailed Dimensions 115/230V ac or 24V dc supply voltage 85.0 mm SAFETY LIGHT SCREENS MICRO-SCREEN(R) Metal Box Controllers 84.0 mm One- or two-beam floating blanking and selectable power-up EZ-SCREEN(R) PICO-GUARDTM Optional fixed blanking, muting and External Device Monitoring (EDM) 210.0 mm MICRO-SCREEN(R) MINI-SCREEN(R) 295.0 mm EZ-SCREEN(R) TYPE 2 Latch or trip output NEMA 13, IEC IP64 housing E-stop input 260.0 mm 210.0 mm MICRO-SCREEN Metal Box Controller (USCD-1T2 shown) MICRO-SCREEN Metal Box Controller with Muting (USCC-1L2M shown) MICRO-SCREEN(R) Series, Metal Box Controllers Models Supply Voltage Output Type 24V dc Trip Download PDF Safety Output Aux. Outputs Rating Outputs** USCT-2T2 Floating Blanking Fixed Blanking Data Sheet 4 amps -- Yes 51597 USCT-2T3 6 amps 1 NC Yes 51597 & 59664 USCD-1T2 4 amps -- No 51597 USCD-1T3 6 amps 1 NC No 51597 & 59664 4 amps -- Yes 51597 6 amps 1 NC USCD-2T2 USCD-2T3 Trip 115/ 230V ac 2 NO 1- or 2-beam Yes 51597 & 59664 USCD-2T3E* 6 amps 1 NC Yes USCD-1L2 4 amps -- No 4 amps -- Yes 67173 Latch USCD-2L2 NC = Normally Closed Relay, NO = Normally Open Relay * The suffix "E" adds external device monitoring input ** All models contain one Reed Relay (see specifications page 53). More information online at bannerengineering.com 45 SAFETY LIGHT SCREENS SAFETY LIGHT SCREENS MICRO-SCREEN(R) Systems MICRO-SCREEN(R) Series, Metal Box Controllers with Muting Models Supply Voltage Output Type Safety Output Aux. Outputs Rating Outputs* Floating Blanking Download PDF Fixed Blanking Data Sheet USCC-1T2M 4 amps -- No 67690 USCC-1T3M 6 amps 1 NC No 67690 & 59664 4 amps -- Yes 67690 6 amps 1 NC Yes 67690 & 59664 4 amps -- No 58764 4 amps -- Yes 58764 6 amps 1 NC Yes 58764 & 59644 EZ-SCREEN(R) PICO-GUARDTM MICRO-SCREEN(R) Trip MINI-SCREEN(R) USCC-2T2M EZ-SCREEN(R) TYPE 2 USCC-2T3M 115/ 230V ac or 24V dc 2 NO USCC-1L2M USCC-2L2M Latch USCC-2L3M 1- or 2-beam NC = Normally Closed Relay, NO = Normally Open Relay * All models contain two Reed Relays (see specifications page 54-55). Note: External Device Monitoring (EDM) standard on all controllers with muting. MICRO-SCREEN(R) DIN Module Controllers Polycarbonate housing with clear cover Detailed Dimensions 24V dc supply voltage 115.0 mm One- or two-beam floating blanking and selectable auto power-up Optional fixed blanking and External Device Monitoring (EDM) 81.0 mm E-Stop input and latch or trip output NEMA 1; IP20 housing 107.0 mm DeviceNetTM compatible Up to 4 normally open contacts to control up to two hazards MICRO-SCREEN DIN Module Controller (USDINT-1T2 shown) DeviceNetTM is a trademark of Rockwell Automation. 46 More information online at bannerengineering.com SAFETY LIGHT SCREENS MICRO-SCREEN(R) Systems Models Supply Voltage Output Type Safety Outputs** Output Rating Download PDF Floating Blanking Fixed Blanking 2 NO USDINT-1T2 Data Sheet SAFETY LIGHT SCREENS MICRO-SCREEN(R) Series, DIN Module Controllers 48753 EZ-SCREEN(R) 2 NO USDINT-1T2E* No 53229 PICO-GUARDTM USDINT-1T4 Trip 4 NO 48753 & 55631 2 NO 48753 MICRO-SCREEN(R) MINI-SCREEN(R) USDINT-2T2 EZ-SCREEN(R) TYPE 2 Yes USDINT-2T4 4 NO USDINT-1L2 2 NO 48753 & 55631 54202 No USDINT-1L4 4 NO 54202 & 55631 2 NO 54202 Latch USDINT-2L2 Yes USDINT-2L4 4 NO 24V dc 4 amps 54202 & 55631 1- or 2-beam 48753 & 51699 2 NO USDINT-1T2D No USDINT-1T4D USDINT-2T2D Trip plus DeviceNetTM 4 NO 48753, 51699 & 55631 2 NO 48753 & 51699 Yes USDINT-2T4D 4 NO 48753, 51699 & 55631 USDINT-1L2D 2 NO 54202 & 54205 No USDINT-1L4D USDINT-2L2D Latch plus DeviceNetTM 4 NO 54202, 54205 & 55631 2 NO 54202 & 54205 Yes USDINT-2L4D 4 NO 54202, 54205 & 55631 NC = Normally Closed Relay, NO = Normally Open Relay * The suffix "E" adds external device monitoring input ** In addition to safety outputs, all models contain one non-safety Reed Relay auxiliary output (see specifications pages 55-57). DeviceNetTM is a trademark of Rockwell Automation. More information online at bannerengineering.com 47 SAFETY LIGHT SCREENS EZ-SCREEN(R) PICO-GUARDTM MICRO-SCREEN(R) MICRO-SCREEN(R) Interfacing Products Models Muting Modules SAFETY LIGHT SCREENS MICRO-SCREEN(R) Systems Download PDF Description MM-TA-12B MMD-TA-12B MMD-TA-11B Product Information Data Sheet 63517 * The Muting Module temporarily inhibits a safety light screen so materials can safely pass through the screen without stopping the machinery. * The module uses redundant microcontrollerbased logic. Page 123 * Pairs of contactors create safety stop circuits with two normally open contacts in series. * MICRO-SCREEN can monitor the circuit because of the contacts' force-guided mechanically linked design. * Contactors add 10 or 16 amp current carrying capability to any safety system. * Auxiliary contacts add 3 or 4 normally open contacts. * Suppressors extend the life of an actuating device that uses a contactor. * Modular design simplifies assembly and installation. Page 186 116390 (R) MINI-SCREEN Mechanically Linked Contactors (R) EZ-SCREEN TYPE 2 11-BG00-31-A12060 11-BG00-31-D-024 Contactors 11-BF1601-12060 11-BF16C01-024 Aux. Contacts 11-BGX10-40 11-G484-30 Suppressors 11-BGX77-048 11-BGX77-240 11-G318-48 11-G477-240 48 More information online at bannerengineering.com 111881 SAFETY LIGHT SCREENS MICRO-SCREEN(R) Systems You can purchase a kit that contains an emitter and receiver of equal length and range; standard mounting brackets; and a pair of quick-disconnect cables. Detailed information about individual kit components is as follows. * Metal Box Controllers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 45 * Emitter and Receivers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43 SAFETY LIGHT SCREENS MICRO-SCREEN(R) Metal Box Controller Kits EZ-SCREEN(R) * Cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 175 PICO-GUARDTM * Brackets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 190 MICRO-SCREEN(R) USK2T24243C5Y * USK2T24123C5Y 19 mm 24 32 mm 12 19 mm 24 32 mm 12 19 mm 24 32 mm 12 19 mm 24 32 mm 12 QD Ca bling Numb Ou t puer o f ts Ou t pu Ty pe t in g Blan k S u p pl Vol t agy e Range u t io n B e am Foo t s Per NickelYellow Plated Kit Model Number Re s ol Sensor Housing De fine A r ea d A partial listing of kits is listed below; see Kit Model Key to order other variations. 24V dc USK2T24243C5N * USK2T24123C5N 610 mm USK2D24243C5Y * USK2D24123C5Y Fixed & Floating 9m 2 NO Safety 8 m, Outputs 2 each & 1 NC Aux. Trip 115/230V ac USK2D24243C5N * USK2D24123C5N NC = Normally Closed Relay, NO = Normally Open Relay Kit Model Key Model Style Kit U S K Fixed-Beam Supply Blanking Voltage 2 D Options Defined Area Beams Per Foot E 2 4 1 2 Model Style US = MICRO-SCREEN Output No. of Type Outputs 3 QD Cables Finish Sensor Cable Termination C 5 Y P 2 Number of Outputs Blank= 2 NO Safety Outputs 3 = 2 NO Safety Outputs & 1 NC Aux. Kit K = Kit Fixed-Beam Blanking Blank = Without 2 = With Supply Voltage D = 115/230V ac T = 24V dc Options E = With External Device Monitoring (EDM) Blank = Without Defined Area 4 = 102 mm 8 = 203 mm 12 = 305 mm 16 = 406 mm 20 = 508 mm 24 = 610 mm 28 = 711 mm 32 = 813 mm 36 = 914 mm 40 = 1016 mm 44 = 1118 mm 48 = 1219 mm 56 = 1422 mm 64 = 1626 mm 72 = 1829 mm Output Type Blank = Trip L = Latch Sensor Cable Termination I = Integral 8 m cable Blank = Integral QD connector P2 = Pigtail QD connector Sensor Finish Y = Yellow polyester paint N = Nickel plated ESD Beams per Foot 24 = Standard Series 12 = V-Series Quick-Disconnect Cables C4 = 2 x 5 m C5 = 2 x 8 m C6 = 1 x 5 m plus 1 x 8 m Blank = Integral 8 m cables NOTE: Not all combinations are possible. Contact Banner Engineering Corp. for additional information and/or verification of valid kit model number. More information online at bannerengineering.com 49 MINI-SCREEN(R) EZ-SCREEN(R) TYPE 2 SAFETY LIGHT SCREENS SAFETY LIGHT SCREENS MICRO-SCREEN(R) Systems MICRO-SCREEN(R) Metal Box Controller with Muting Kits You can purchase a kit that contains an emitter and receiver of equal length and range; standard mounting brackets; and a pair of quick-disconnect cables. Detailed information about individual kit components is as follows. * Metal Box Controllers with Muting . . . . . . . . . . . . . . . . . . . . . . . . Page 46 * Emitter and Receivers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43 EZ-SCREEN(R) * Cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 175 PICO-GUARDTM * Brackets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 190 (R) MICRO-SCREEN A partial listing of kits is listed below; see Kit Model Key to order other variations. USK2CM2424L3C5Y * USK2CM2412L3C5Y 19 mm 24 32 mm 12 19 mm 24 32 mm 12 610 mm USK2CM2424L3C5N * USK2CM2412L3C5N 9m 115/230V ac or 24V dc Fixed & Floating QD Ca bling Numb Ou t puer o f ts Ou t pu Ty pe t in g Blan k S u p pl Vol t agy e Range NickelYellow Plated Kit Model Number B e am Foo t s Per De fine A r ea d Sensor Housing EZ-SCREEN(R) TYPE 2 Re s ol MINI-SCREEN u t io n (R) 2 NO Safety 8 m, Latch Outputs 2 each & 1 NC Aux. NC = Normally Closed Relay, NO = Normally Open Relay Kit Model Key Model Style Kit U S K Fixed-Beam Supply Blanking Voltage 2 C Muting Defined Area Beams Per Foot Output Type No. of Outputs QD Cables Finish Sensor Cable Termination M 2 4 1 2 L 3 C 5 Y P 2 Model Style US = MICRO-SCREEN Number of Outputs Blank = 2 NO Safety Outputs 3 = 2 NO Safety Outputs & 1 NC Aux. Kit K = Kit Fixed-Beam Blanking Blank = Without 2 = With Output Type Blank = Trip L = Latch Supply Voltage C = 115/230V ac or 24V dc Muting M = With Defined Area 4 = 102 mm 8 = 203 mm 12 = 305 mm 16 = 406 mm 20 = 508 mm 24 = 610 mm 28 = 711 mm 32 = 813 mm 36 = 914 mm 40 = 1016 mm 44 = 1118 mm 48 = 1219 mm 56 = 1422 mm 64 = 1626 mm 72 = 1829 mm Beams per Foot 24 = Standard Series 12 = V-Series Sensor Cable Termination I = Integral 8 m cable Blank = Integral QD connector P2 = Pigtail QD connector Sensor Finish Y = Yellow polyester paint N = Nickel plated ESD Quick-Disconnect Cables C4 = 2 x 5 m C5 = 2 x 8 m C6 = 1 x 5 m plus 1 x 8 m Blank = Integral 8 m cables NOTE: Not all combinations are possible. Contact Banner Engineering Corp. for additional information and/or verification of valid kit model number. 50 More information online at bannerengineering.com SAFETY LIGHT SCREENS MICRO-SCREEN(R) Systems You can purchase a kit that contains an emitter and receiver of equal length and range; standard mounting brackets; and a pair of quick-disconnect cables. Detailed information about individual kit components is as follows. * Metal DIN Box Controllers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 47 * Emitter and Receivers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43 SAFETY LIGHT SCREENS MICRO-SCREEN(R) DIN Module Controller Kits EZ-SCREEN(R) * Cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 175 PICO-GUARDTM * Brackets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 190 MICRO-SCREEN(R) USDK2T2424C5Y * USDK2T2412C5Y USDK2T2424C5N * USDK2T2412C5N 19 mm 24 32 mm 12 19 mm 24 32 mm 12 610 mm USDK2T2424C5Y * USDK2T2412C5Y USDK2T2424C5N * USDK2T2412C5N 24 32 mm 12 19 mm 24 32 mm 12 QD Ca bling Numb Ou t puer o f ts Ou t pu Ty pe t in g Blan k 24V dc Fixed & Floating Output No. of Type Outputs QD Cables Finish Sensor Cable Termination C 5 Y P 2 9m 19 mm S u p pl Vol t agy e Range u t io n B e am Foo t s Per NickelYellow Plated Kit Model Number Re s ol Sensor Housing De fine A r ea d A partial listing of kits is listed below; see Kit Model Key to order other variations. 2 NO Safety Outputs Trip 8 m, 2 each NC = Normally Closed Relay, NO = Normally Open Relay Kit Model Key Model Style Kit U S D K Fixed-Beam Supply Blanking Voltage 2 T Options Defined Area Beams Per Foot E 2 4 1 2 Model Style US = MICRO-SCREEN Number of Outputs Blank= 2 NO Safety Outputs 4 = 4 NO Safety Outputs Kit DK = Kit Fixed-Beam Blanking Blank = Without 2 = With Supply Voltage T = 24V dc Options E = With External Device Monitoring (EDM) D = With DeviceNet Blank = Without Defined Area 4 = 102 mm 8 = 203 mm 12 = 305 mm 16 = 406 mm 20 = 508 mm 24 = 610 mm 28 = 711 mm 32 = 813 mm 36 = 914 mm 40 = 1016 mm 44 = 1118 mm 48 = 1219 mm 56 = 1422 mm 64 = 1626 mm 72 = 1829 mm Output Type Blank = Trip L = Latch Sensor Cable Termination I = Integral 8 m cable Blank = Integral QD connector P2 = Pigtail QD connector Sensor Finish Y = Yellow polyester paint N = Nickel plated ESD Beams per Foot 24 = Standard Series 12 = V-Series Quick-Disconnect Cables* C4 = 2 x 5 m C5 = 2 x 8 m C6 = 1 x 5 m plus 1 x 8 m Blank = Integral 8 m cables NOTE: Not all combinations are possible. Contact Banner Engineering Corp. for additional information and/or verification of valid kit model number. More information online at bannerengineering.com 51 MINI-SCREEN(R) EZ-SCREEN(R) TYPE 2 SAFETY LIGHT SCREENS SAFETY LIGHT SCREENS MICRO-SCREEN(R) Systems EZ-SCREEN(R) MICRO-SCREEN(R) Emitter & Receiver Specifications Emitter/Receiver Separation 4" to 48" Emitters and Receivers: 150 mm to 9 m 56" to 72" Emitters and Receivers: 150 mm to 6 m Minimum Object Sensitivity Standard Series: 19.1 mm floating blanking OFF 31.8 mm 1-beam floating blanking ON 44.5 mm 2-beam floating blanking ON Response Time Light Screens: Less than 38 milliseconds (less than 48 milliseconds with muting option) E-Stop: Less than 15 milliseconds Self-Checking Interval 20 milliseconds Ambient Light Immunity >10,000 lux at 5 angle of incidence Strobe Light Immunity Totally immune to one Federal Signal Corp. "Fireball" model FB2PST strobe. Emitter Elements Infrared LEDs; 880 nm peak emission Status Indicators Emitter: Green LED indicator for power ON indication Receiver: Red, yellow and green status indicators with the same functions as those on the left side of the control box (see Control Box Specifications, pages 53-57). Yellow also indicates alignment. Indicators are visible on three sides of receiver or emitter base. Emitter and Receiver Enclosures Materials: Aluminum extrusion with yellow polyester paint or nickel-plated finish Rating: NEMA 4, 13; IEC IP65 Mounting Hardware Emitter and receiver each are supplied with a pair of swivel end mounting brackets. (Emitters and receivers 711 to 914 mm long are supplied with one center support bracket; emitters and receivers 1016 to 1829 mm long are supplied with two center brackets.) Mounting brackets are 13-gauge cold-rolled black zinc chromate finished steel. Cables Emitters and Receivers with Integral Cables (USE/USRxxxxYI): Cables are 7.6 m long and measure 8.1 mm in diameter. Conductors are 20-gauge. Cables are shielded and PVC-jacketed. PICO-GUARDTM MICRO-SCREEN(R) (R) MINI-SCREEN EZ-SCREEN(R) TYPE 2 V-Series: 31.8 mm floating blanking OFF 57.5 mm 1-beam floating blanking ON 82.6 mm 2-beam floating blanking ON Emitters and Receivers with Integral (USE/USRxxxxY) or Pigtail (USE/USRxxxxYP2) Quick Disconnect: Pigtail QD connectors have a 300 mm long cable, terminated with a 5-pin Euro-style quick-disconnect fitting. Mating interconnect cables are ordered separately (unless a MICRO-SCREEN kit is ordered, see Models and Accessories, page 175), and are available in lengths of 4.5 m, 7.6 m, and 15 m. NOTE: Contact factory when cable length exceeding 15 m is required. Use only Banner cables, which incorporate a shielded "twisted pair" for noise immunity on RS485 data communications lines. Use of other cables may result in "nuisance" trips or lockouts. Optical Performance This system meets 2.5 requirements of IEC 61496-2 section 5.2.9 (Type 4) Operating Conditions Temperature: 0 to +50 C Certifications For a list of certifications see page 236. 52 More information online at Relative humidity: 95% maximum (non-condensing) bannerengineering.com SAFETY LIGHT SCREENS MICRO-SCREEN(R) Systems SAFETY LIGHT SCREENS MICRO-SCREEN(R) Metal Box Controller Specifications System Power Requirements USCD-.. models: 115/230V ac 15% (50/60 Hz), 55 VA USCT-.. models: 24V dc 15% @ 1.5 amp max. Fuse Rating (F2) 115V ac: 1 amp, 250V ac; 230V ac: 0.5 amp, 250V 24V dc: 2 amp, 250V Response Time Light Screens: Less than 38 milliseconds E-Stop: Less than 15 milliseconds Status Indicators * Control Box and Receiver: Solid LED Red BLOCKED/LATCHED Green CLEAR Yellow RESET EZ-SCREEN(R) PICO-GUARDTM Flashing LED LOCKOUT BLANKING ON Double Flash = Waiting for System Key RESET at Power-up Single Flash = ALIGNMENT. Flash rate increases with the number of sensing beams "made", solid yellow when aligned and defined area is clear MICRO-SCREEN(R) MINI-SCREEN(R) EZ-SCREEN(R) TYPE 2 Diagnostic Indicator Two-digit numeric display indicates cause of lockout condition and total number of beams blocked. Controls and Adjustments Keyed RESET of system lockout and latched conditions Floating blanking selection switches and fixed blanking programming switches Auto Power-up On-Off switches E-Stop Switch Input The Emergency Stop switch must offer two normally closed contacts and be capable of switching 50 mA @ 30V dc. Total resistance, including wiring and all switches, must not exceed 30 for proper operation. Functional stop category 0 per NFPA 79 and EN 418, Safety Category 4 per EN 954-1. Simultaneity requirement less than 100 milliseconds. External Device Monitoring (EDM) Input* Terminals must open within 200 milliseconds of the FSD outputs closing (i.e., a clear condition) and must close within 200 milliseconds of the FSD outputs opening (i.e., a blocked condition) or a lockout will occur. The monitoring contacts must be forced-guided (or captive contact) to maintain control reliability of the machine control circuit and must be capable of reliably switching 15 to 50V dc at 20 to 100 mA. Test Input Terminals must be closed for a minimum of 0.05 seconds in order to guarantee a test input signal. The switching device used must be capable of switching 15-50V dc at 20 to 100 mA. Reset Input Terminals must be closed for a minimum of 0.5 seconds in order to guarantee a reset. The switching device must be capable of switching 15-50V dc at 20-100 mA. Auxiliary Monitor Relay Reed relay; 125V ac or dc max., 500 mA max. (10 VA max., resistive load) Safety Outputs Forced-guided contact relay (resistive load). USCD-..2 & USCT-..2: FSD1 & 2, SSD = 250V ac max., 4 amp max. USCD-..3 & USCT-..3: FSD1 & 2, CNC = 250V ac max., 6 amp max. SSD = 250V ac max., 4 amp max. Mechanical life: 10,000,000 operations (minimum). Electrical life: 100,000 operations (typical @ 1.0 kVA switching power). Arc suppression is recommended when switching inductive loads. Enclosure Material: Welded steel box with black polyester powder paint finish Rating: NEMA 13; IEC IP64 Operating Conditions Temperature: 0 to +50 C FMEA Tested Per requirements IEC 61496-1 (type 4) Applications Notes Use of fixed blanking requires sensors with 16 or more light beams. Up to 12 beams or 30% of the total number of beams in the array may be blanked, whichever is less. Call factory for applications assistance if a greater number of blanked beams is required. Certifications For a list of certifications see page 236. Wiring Diagrams 2 FSDs, 1 SSD and Power Monitoring: WD017 (p. 255) Relative humidity: 95% maximum (non-condensing) External Device Monitoring (EDM) models only. More information online at bannerengineering.com 53 SAFETY LIGHT SCREENS SAFETY LIGHT SCREENS MICRO-SCREEN(R) Systems EZ-SCREEN(R) PICO-GUARDTM MICRO-SCREEN(R) Metal Box Controller with Muting Specifications System Power Requirements 115V ac (50/60Hz) 15% @ 500 mA (50 VA), 230V ac (50/60Hz) 15% @ 250 mA (50 VA), or 24V dc 15%, 10% max. ripple, @ 2.5 A (60 W) Fuse Rating (F2) 115V ac: 1.0 A ac @ 250V ac (supplied) 230V ac: 500 mA @ 250V ac +24V dc: Internal resettable Response Time Light Screen: Less than 48 milliseconds Status LED Indicators Light Screen Indicators (left column of LEDs): Solid LED Flashing LED Red BLOCKED/LATCHED LOCKOUT Green CLEAR BLANKING ON Yellow RESET Double Flash = Waiting for Single Flash = ALIGNMENT. Flash rate increases with the number of sensing beams "made", solid yellow when aligned and defined area is clear System Indicators (right column of LEDs): Solid LED Flashing LED Red OVERRIDE LOCKOUT Green OUTPUT ON (Not Applicable) (FSD1 & FSD2 closed) Yellow RESET Double Flash = Waiting for System Key Reset at Power-up (System) Single Flash = Waiting for System Key Reset at latched condition (manual reset of system after blockage has been removed) Diagnostic Displays Light Screen Diagnostic Display (left window) is a two-digit numeric display that indicates the cause of lockout conditions and total number of beams blocked. MICRO-SCREEN(R) MINI-SCREEN(R) EZ-SCREEN(R) TYPE 2 E-Stop: Less than 15 milliseconds System Diagnostic Display (right window) is a two-digit numeric display that indicates the cause of lockout conditions and the amount of time, in seconds, remaining for the backdoor timer. Controls and Adjustments * * * * * * * * * E-Stop Switch Input The Emergency Stop switch must offer two normally closed contacts and be capable of switching 50 mA @ 30V dc. Total resistance, including wiring and all switches, must not exceed 30 for proper operation. Functional stop category 0 per NFPA 79 and EN 418, Safety Category 4 per EN 954-1. Simultaneity requirement less than 100 milliseconds. Light Screen Test Input Terminals must be closed for a minimum of 0.05 seconds in order to guarantee a test. The switching device must be capable of switching 15-50V dc at 20-100 mA. Light Screen and System Reset Inputs Terminals must be closed for a minimum of 0.5 seconds in order to guarantee a reset. The switching device must be capable of switching 15-50V dc at 20-100 mA. External Device Monitoring (EDM) Input(s) Two pairs of terminals are provided to monitor the state of external devices that are being controlled by the FSD outputs. The device must be capable of switching 15-50V dc at 20-100 mA. Mute Enable Input Terminals must be closed in order to start a mute; opening this input after mute has begun has no effect. The switching device must be capable of switching 15-50V dc at 20-100mA. Override Inputs The two-channel inputs must be closed within 3 seconds of each other (simultaneity requirement) and held closed during the 10-second Override. To initiate a subsequent Override, open both channels, wait 3 seconds, and then re-close both channels (within 3 seconds). The switching devices must be capable of switching 15-50V dc at 20-100 mA. Muting Device Input The muting devices work in pairs (M1 and M2, M3 and M4) and are required to be "closed" within 3 seconds of each other (simultaneity requirement) to initiate a mute (assuming all other conditions are met). Each muting device must be capable of switching 15-50V dc at 20-100 mA. Light Screen and System Aux. Monitor Relay Outputs Reed relay; 125V ac/dc max at 500 mA max. (10 VA maximum, resistive load) 54 Light Screen Key Reset after power-up and light screen lockouts Selection switches to enable floating blanking Program switches to enable fixed blanking (USCC-2.. only) Light Screen and System Auto Power-up selection switches System Key Reset after power-up, system lockouts, and latched conditions Selection switches for Monitored or Non-Monitored Muting indicator Selection switches for One-Way or Two-Way (directional/non-directional) Muting Selection switches for One-Channel or Two-Channel Monitoring (EDM) Selection switches for Backdoor Timer settings and Mute-on-Power-Up More information online at bannerengineering.com SAFETY LIGHT SCREENS MICRO-SCREEN(R) Systems Forced-guided contact relay (resistive load). USCC-..2: FSD1 & 2, SSD = 250V ac max., 4 amp max. USCC-..3: FSD1 & 2, CNC = 250V ac max., 6 amp max. SSD = 250V ac max., 4 amp max. Mechanical life: 10,000,000 operations (minimum). Electrical life: 100,000 operations (typical @ 1.0 kVA switching power). Arc suppression is recommended when switching inductive loads. Safety Outputs Mute Lamp Output EZ-SCREEN(R) A monitored or non-monitored (selectable) sinking output. If monitoring has been selected, the current draw must be within 10 mA to 360 mA. Max. switching voltage: 30V dc Max. switching current: 360 mA Max. switching current: 10 mA Saturation voltage: 1.5V dc Auxiliary DC Supply Output 24V dc 25%, 500 mA max Enclosure Material: Welded steel box with black polyester powder paint finish. Rating: NEMA 13; IEC IP64 Operating Conditions Temperature: 0 to +50 C FMEA Tested Per requirements of IEC 61496-1 (type 4) Applications Notes Use of fixed blanking requires sensors with 16 or more light beams. Up to 12 beams or 30% of the total number of beams in the array may be blanked, whichever is less. Call factory for applications assistance if a greater number of blanked beams is required. Certifications For a list of certifications see page 236. Wiring Diagrams 2 FSDs and 2-Channel EDM: WD018 (p. 255) PICO-GUARDTM MICRO-SCREEN(R) MINI-SCREEN(R) EZ-SCREEN(R) TYPE 2 Relative humidity: 95% maximum (non-condensing) MICRO-SCREEN(R) DIN Module Controller Specifications System Power Requirements 24V dc 15%, 10% max. ripple, 1.5 amps max. Fuse Rating 2 amp, 250 V (3 AG or 5 x 20 mm slow blow) Response Time Light Screens: Less than 38 milliseconds E-Stop: Less than 15 milliseconds Status Indicators Control Box and Receiver: Solid LED Red BLOCKED/LATCHED Green CLEAR Yellow RESET (on control module and receiver) Flashing LED LOCKOUT BLANKING ON Double Flash = Waiting for System Key Reset at Power-up Single Flash = ALIGNMENT. Flash rate increases with the number of sensing beams "made", solid yellow when aligned and defined area is clear Diagnostic Indicator Two-digit numeric display indicates cause of lockout condition and total number of beams blocked. Controls and Adjustments Keyed Reset of system lockout and latched conditions Floating Blanking selection switches and Fixed Blanking programming switches Auto Power-up On-Off switches E-Stop Switch Input The Emergency Stop switch must offer two normally closed contacts and be capable of switching 50 mA @ 30V dc. Total resistance, including wiring and all switches, must not exceed 30 for proper operation. Functional stop category 0 per NFPA 79 and EN 418, Safety Category 4 per EN 954-1. Simultaneity requirement less than 100 milliseconds. External Device Monitoring (EDM) Input* Terminals must open within 200 milliseconds of the FSD outputs closing (i.e., a clear condition) and must close within 200 milliseconds of the FSD outputs opening (i.e., a blocked condition) or a lockout will occur. The monitoring contacts must be forced-guided (or captive contact) to maintain control reliability of the machine control circuit and must be capable of reliably switching 15 to 50V dc at 20 to 100 mA. Test Input (except EDM models) Terminals must be closed for a minimum of 0.05 seconds in order to guarantee a test input signal. The switching device used must be capable of switching 15-50V dc at 20 to 100 mA. AUX Non-Safety Output Contact Reed relay; 125V ac or dc max., 500 mA max. (10 VA max., resistive load) * External Device Monitoring (EDM) models only. More information online at bannerengineering.com SAFETY LIGHT SCREENS (R) (R) MICRO-SCREEN Metal BoxBox Controller withwith Muting Specifications (cont'd) MICRO-SCREEN Metal Controller Muting Specifications 55 SAFETY LIGHT SCREENS SAFETY LIGHT SCREENS MICRO-SCREEN(R) Systems (R) MICRO-SCREEN DIN(R) DIN Module Controller Specifications (cont'd) MICRO-SCREEN Module Controller Specifications Safety Outputs Forced-guided contact relays (resistive load). FSD1 & 2, SSD = 250V ac max., 4 amps max. Mechanical life: 10,000,000 operations (minimum). Electrical life (at full rated load): 100,000 operations (typical). Arc suppression is recommended when switching inductive loads. Note: Controllers with model suffix "2" have two FSD output contacts and those with model suffix "4" have four FSD output contacts. Enclosure Material: gray polycarbonate, clear polycarbonate cover Rating: NEMA 1; IP20 Operating Conditions Temperature: 0 to +50 C FMEA Tested Per requirements IEC 61496-1 Application Notes Use of fixed blanking requires sensors with 16 or more light beams. Up to 12 beams or 30% of the total number of beams in the array may be blanked, whichever is less. Call factory for applications assistance if a greater number of blanked beams is required. Certifications For a list of certifications see page 236. Wiring Diagrams 2 FSDs, 1 SSD and Power Monitoring: WD019 (p. 256) 2 FSDs, 1 SSD and 1-Channel EDM: WD020 (p. 256) 4 FSDs, 1 SSD and Power Monitoring: WD021 (p. 257) EZ-SCREEN(R) PICO-GUARDTM MICRO-SCREEN(R) MINI-SCREEN(R) (R) EZ-SCREEN TYPE 2 Relative humidity: 95% maximum (non-condensing) MICRO-SCREEN(R) DIN Module with DeviceNetTM Specifications Device Net Power 11 to 25V dc; 80 mA - supplied by DeviceNet BUS Network Response Time Light Screen: Less than 38 milliseconds (all lengths) E-Stop: Less than 15 milliseconds Status Indicators (on control module and receiver) Red Green Yellow Solid LED BLOCKED/LATCHED CLEAR RESET Flashing LED LOCKOUT BLANKING ON Double Flash = Waiting for System Key Reset at Power-up Single Flash = ALIGNMENT. Flash rate increases with the number of sensing beams "made", solid yellow when aligned and defined area is clear Network status indicator: A bi-color (red/green) LED visible on the control module indicates network status: Green Steady On-line, connected to master Flashing On-line, not connected/allocated to master; if Autobaud is ON, address and baud rate OK Red Steady Critical network fault or duplicate mode address detected Flashing Connection time-out or no power to light screen OFF No network power or off-line Green/Red/OFF Autobaud detecting network baud rate Diagnostic Indicator Two-digit numeric display indicates cause of lockout condition and total number of beams blocked. Controls and Adjustments Keyed RESET of system lockout and latched conditions Floating blanking selection switches and fixed blanking programming switches Auto Power-up On-Off switches E-Stop Switch Input The Emergency Stop switch must offer two normally closed contacts and be capable of switching 50 mA @ 30V dc. Total resistance, including wiring and all switches, must not exceed 30 for proper operation. Functional stop category 0 per NFPA 79 and EN 418, Safety Category 4 per EN 954-1. Simultaneity requirement less than 100 milliseconds. Test Input Terminals must be closed for a minimum of 0.05 seconds in order to guarantee a test input signal. The switching device used must be capable of switching 15-50V dc at 20 to 100 mA. DeviceNetTM is a trademark of Rockwell Automation. 56 More information online at bannerengineering.com SAFETY LIGHT SCREENS MICRO-SCREEN(R) Systems DeviceNetTM Configuration Vendor Code Device Type Product Code USDINT-1T2D/USDINT-1T4D USDINT-2T2D/USDINT-2T4D USDINT-1L2D/USDINT-1L4D USDINT-2L2D/USDINT-2L4D Connection Types Supported Network Address Baud Rate Supported 12 130 (Banner Engineering Corp.) (Safety Light Screen) 1 2 3 4 SAFETY LIGHT SCREENS (R) TM TM MICRO-SCREEN DIN(R) DIN Module withwith DeviceNet Specifications (cont'd) MICRO-SCREEN Module DeviceNet Specifications EZ-SCREEN(R) Explicit Message, Poll, Change of State 0-63 (Manual Switches or Network configured) Autobaud or Network configured (125K, 250K, 500K) (Factory setting is Autobaud ON) EDS File Names USDINT-1T2D/USDINT-1T4D 130_1_2.eds USDINT-2T2D/USDINT-2T4D 130_2_2.eds USDINT-1L2D/USDINT-1L4D 130_3_1.eds USDINT-2L2D/USDINT-2L4D 130_4_1.eds Bit Map Icon File Name 130.bmp EDS and Bitmap files on 3.5" floppy disk supplied with controller (p/n 52243) EZ-SCREEN(R) TYPE 2 The MICRO-SCREEN device I/O assemblies consist of: * Poll: One product specific input assembly containing operating mode, status of defined area, status of output relays, status of inputs (Key Reset, Test, and E-Stop), noise detected, number of sensor beams, number of beams blocked, Auto Power-up switch settings, COS trigger setting, autobaud setting, floating blanking switch settings and number of fixed beams (Fixed Blanking models only). * COS: One product-specific input assembly containing the operating mode and defined area status. Auxiliary Monitor Relay Reed relay; 125V ac or dc max., 500 mA max. (10 VA max., resistive load) Safety Outputs Forced-guided contact relays (resistive load). FSD1 & 2, SSD = 250V ac max., 4 amps max. Mechanical life: 10,000,000 operations (minimum). Electrical life (at full rated load): 100,000 operations (typical). Arc suppression is recommended when switching inductive loads. Note: Controllers with model suffix "2" have two FSD output contacts and those with model suffix "4" have four FSD output contacts. Enclosure Material: gray polycarbonate, clear polycarbonate cover Rating: NEMA 1; IP20 Operating Conditions Temperature: 0 to +50 C FMEA Tested Per requirements IEC 61496-1 Application Notes Use of fixed blanking requires sensors with 16 or more light beams. Up to 12 beams or 30% of the total number of beams in the array may be blanked, whichever is less. Call factory for applications assistance if a greater number of blanked beams is required. Certifications For a list of certifications see page 236. Wiring Diagrams 2 FSDs, 1 SSD and Power Monitoring: WD019 (p. 256) 2 FSDs, 1 SSD and 1-Channel EDM: WD020 (p. 256) 4 FSDs, 1 SSD and Power Monitoring: WD021 (p. 257) Relative humidity: 95% maximum (non-condensing) DeviceNetTM is a trademark of Rockwell Automation. bannerengineering.com MICRO-SCREEN(R) MINI-SCREEN(R) Poll and COS I/O Assembly Instances More information online at PICO-GUARDTM 57 SAFETY LIGHT SCREENS SAFETY LIGHT SCREENS MINI-SCREEN(R) Systems MINI-SCREEN(R) Safety Light Screen Systems EZ-SCREEN(R) * Family is designed for heavy-duty production machinery. PICO-GUARDTM MICRO-SCREEN(R) QD CABLES 5-Pin Mini MINI-SCREEN(R) (R) EZ-SCREEN TYPE 2 PAGE 179 ).$)#!4/23 PAGE 187 BRACKETS * Full system includes emitter, receiver, controller and interconnecting cables. Order QD cables separately. * Standard or heavy-duty housing are available for emitters and receivers. * Emitters and receivers feature compact housing with 19, 25 and 38 mm resolution. PAGE 190 -)22/23 PAGE 204 34!.$3 PAGE 209 ,%.3 3()%,$3 PAGE 213 %.#,/352%3 PAGE 217 * Explosion-proof enclosures are available. * Systems include floating blanking (one- or two- beam), selectable auto power-up and optional fixed blanking. MINI-SCREEN 19 mm Emitters & Receivers . . . . .Page 59 MINI-SCREEN 25 mm Emitters & Receivers . . . . . . . . . 61 MINI-SCREEN 38 mm Heavy-Duty Emitters & Receivers. . 63 MINI-SCREEN Metal Box Controllers . . . . . . . . . . . . . . . 64 MINI-SCREEN DIN Module Controllers. . . . . . . . . . . . . . 65 MINI-SCREEN Interfacing Products . . . . . . . . . . . . . . . . 66 MINI-SCREEN(R) Emitters & Receivers 19 mm resolution with maximum 9 m range or 25 mm resolution with maximum 18 m range Detailed Dimensions 38.1 mm Yellow painted or black anodized aluminum housing with rugged end caps Full View of Available Finishes Twelve heights from 114 to 1219 mm Status indicators Swivel brackets for easy alignment 5-pin Mini QD connection standard L QDS-... 5-pin Mini QD cables with "twisted pair" (see page 179) NEMA 4, 13; IEC IP65 housing 38.1 mm Yellow Painted Aluminum 58 More information online at bannerengineering.com Black Anodized Aluminum SAFETY LIGHT SCREENS (R) MINI-SCREEN Systems Model Number Housing Defined Area Housing Length (L) Range Connection* Download PDF Data Sheet MSE424Y MSR424Y SAFETY LIGHT SCREENS MINI-SCREEN(R), Emitters & Receivers - 19 mm Resolution EZ-SCREEN(R) 19 mm Resolution 114 mm 153 mm PICO-GUARDTM MSE424 MICRO-SCREEN(R) MSR424 19 mm Resolution MINI-SCREEN(R) MSE824Y EZ-SCREEN(R) TYPE 2 MSR824Y 19 mm Resolution 215 mm 254 mm 305 mm 356 mm MSE824 MSR824 19 mm Resolution MSE1224Y MSR1224Y 19 mm Resolution MSE1224 MSR1224 19 mm Resolution 9m 5-Pin Mini QD 39022 MSE1624Y MSR1624Y 19 mm Resolution 406 mm 457 mm 508 mm 558 mm 610 mm 659 mm MSE1624 MSR1624 19 mm Resolution MSE2024Y MSR2024Y 19 mm Resolution MSE2024 MSR2024 19 mm Resolution MSE2424Y MSR2424Y 19 mm Resolution MSE2424 MSR2424 19 mm Resolution 19 mm Resolution Yellow Housing 19 mm Resolution Black Housing * For a 305 mm 5-Pin Mini Pigtail QD, add P to model number (example, MSE424YP). A model with a QD requires a mating cable (see page 179). Note: Emitters (example, MSE424Y) and receivers (example, MSR424Y) are sold separately. More information online at bannerengineering.com 59 SAFETY LIGHT SCREENS SAFETY LIGHT SCREENS MINI-SCREEN(R) Systems EZ-SCREEN(R) PICO-GUARDTM MICRO-SCREEN(R) MINI-SCREEN(R), Emitters & Receivers - 19 mm Resolution (cont'd) Model Number Housing Defined Area Housing Length (L) 711 mm 761 mm 813 mm 862 mm 914 mm 963 mm Download PDF Range Connection* Data Sheet 9m 5-Pin Mini QD 39022 MSE2824Y MSR2824Y 19 mm Resolution MSE2824 MSR2824 19 mm Resolution (R) MINI-SCREEN EZ-SCREEN(R) TYPE 2 MSE3224Y MSR3224Y 19 mm Resolution MSE3224 MSR3224 19 mm Resolution MSE3624Y MSR3624Y 19 mm Resolution MSE3624 MSR3624 19 mm Resolution MSE4024Y MSR4024Y 19 mm Resolution 1016 mm 1064 mm 1118 mm 1166 mm 1219 mm 1267 mm MSE4024 MSR4024 19 mm Resolution MSE4424Y MSR4424Y 19 mm Resolution MSE4424 MSR4424 19 mm Resolution MSE4824Y MSR4824Y 19 mm Resolution MSE4824 MSR4824 19 mm Resolution 19 mm Resolution Yellow Housing 19 mm Resolution Black Housing * For a 305 mm 5-Pin Mini Pigtail QD, add P to model number (example, MSE2824YP). A model with a QD requires a mating cable (see page 179). Note: Emitters (example, MSE2824Y) and receivers (example, MSR2824Y) are sold separately. 60 More information online at bannerengineering.com SAFETY LIGHT SCREENS (R) MINI-SCREEN Systems Model Number Housing Defined Area Housing Length (L) Range Connection* Download PDF Data Sheet MSXLE424Y MSXLR424Y SAFETY LIGHT SCREENS MINI-SCREEN(R), Emitters & Receivers - 25 mm Resolution EZ-SCREEN(R) 25 mm Resolution 114 mm 153 mm PICO-GUARDTM MSXLE424 MICRO-SCREEN(R) MSXLR424 25 mm Resolution MINI-SCREEN(R) MSXLE824Y EZ-SCREEN(R) TYPE 2 MSXLR824Y 25 mm Resolution 215 mm 254 mm 305 mm 356 mm MSXLE824 MSXLR824 25 mm Resolution MSXLE1224Y MSXLR1224Y 25 mm Resolution MSXLE1224 MSXLR1224 25 mm Resolution 18 m 5-Pin Mini QD 39022 MSXLE1624Y MSXLR1624Y 25 mm Resolution 406 mm 457 mm 508 mm 558 mm 610 mm 659 mm MSXLE1624 MSXLR1624 25 mm Resolution MSXLE2024Y MSXLR2024Y 25 mm Resolution MSXLE2024 MSXLR2024 25 mm Resolution MSXLE2424Y MSXLR2424Y 25 mm Resolution MSXLE2424 MSXLR2424 25 mm Resolution 25 mm Resolution Yellow Housing 25 mm Resolution Black Housing * For a 305 mm 5-Pin Mini Pigtail QD, add P to model number (example, MSXLE424YP). A model with a QD requires a mating cable (see page 179). Note: Emitters (example, MSXLE424Y) and receivers (example, MSXLR424Y) are sold separately. More information online at bannerengineering.com 61 SAFETY LIGHT SCREENS SAFETY LIGHT SCREENS MINI-SCREEN(R) Systems EZ-SCREEN(R) PICO-GUARDTM MICRO-SCREEN(R) MINI-SCREEN(R), Emitters & Receivers - 25 mm Resolution (cont'd) Model Number Housing Defined Area Housing Length (L) 711 mm 761 mm 813 mm 862 mm 914 mm 963 mm Download PDF Range Connection* Data Sheet 18 m 5-Pin Mini QD 39022 MSXLE2824Y MSXLR2824Y 25 mm Resolution MSXLE2824 MSXLR2824 25 mm Resolution (R) MINI-SCREEN EZ-SCREEN(R) TYPE 2 MSXLE3224Y MSXLR3224Y 25 mm Resolution MSXLE3224 MSXLR3224 25 mm Resolution MSXLE3624Y MSXLR3624Y 25 mm Resolution MSXLE3624 MSXLR3624 25 mm Resolution MSXLE4024Y MSXLR4024Y 25 mm Resolution 1016 mm 1064 mm 1118 mm 1166 mm 1219 mm 1267 mm MSXLE4024 MSXLR4024 25 mm Resolution MSXLE4424Y MSXLR4424Y 25 mm Resolution MSXLE4424 MSXLR4424 25 mm Resolution MSXLE4824Y MSXLR4824Y 25 mm Resolution MSXLE4824 MSXLR4824 25 mm Resolution 25 mm Resolution Yellow Housing 25 mm Resolution Black Housing * For a 305 mm 5-Pin Mini Pigtail QD, add P to model number (example, MSXLE2824YP). A model with a QD requires a mating cable (see page 179). Note: Emitters (example, MSXLE2824Y) and receivers (example, MSXLR2824Y) are sold separately. 62 More information online at bannerengineering.com SAFETY LIGHT SCREENS (R) MINI-SCREEN Systems SAFETY LIGHT SCREENS MINI-SCREEN(R) Heavy-Duty Emitters & Receivers Robust, impact-resistant housing Detailed Dimensions 38 mm resolution with 18 m range Seven heights from 610 to 1829 mm Full View 55.0 mm High immunity to ambient light interference EZ-SCREEN(R) Status indicators PICO-GUARDTM Swivel bracket for easy alignment MICRO-SCREEN(R) 5-pin Mini QD connection standard MINI-SCREEN(R) QDS-... 5-pin Mini QD with "twisted pair" (see page 179) EZ-SCREEN(R) TYPE 2 L NEMA 4, 13; IEC IP65 housing 52.0 mm MINI-SCREEN Heavy-Duty Emitters & Receivers Yellow Painted Aluminum MINI-SCREEN(R) Heavy-Duty Emitters & Receivers - 38 mm Resolution Defined Area Housing Length (L) MSXLHDE2412Y MSXLHDR2412Y 610 mm 625 mm MSXLHDE3212Y MSXLHDR3212Y 813 mm 826 mm MSXLHDE4012Y MSXLHDR4012Y 1016 mm 1029 mm MSXLHDE4812Y MSXLHDR4812Y 1219 mm 1229 mm MSXLHDE5612Y MSXLHDR5612Y 1422 mm 1433 mm MSXLHDE6412Y MSXLHDR6412Y 1626 mm 1633 mm MSXLHDE7212Y MSXLHDR7212Y 1829 mm 1836 mm Model Number Resolution Download PDF Range Connection* Data Sheet 18 m 5-Pin Mini QD 69018 38 mm Resolution 38 mm Resolution * For a 305 mm 5-Pin Mini Pigtail QD, add P to model number (example, MSXLHDE2412YP). A model with a QD requires a mating cable (see page 179). Note: Emitters (example, MSXLHDE2412Y) and receivers (example, MSXLHDR2412Y) are sold separately. More information online at bannerengineering.com 63 SAFETY LIGHT SCREENS SAFETY LIGHT SCREENS MINI-SCREEN(R) Systems EZ-SCREEN(R) PICO-GUARDTM MICRO-SCREEN(R) (R) MINI-SCREEN EZ-SCREEN(R) TYPE 2 MINI-SCREEN(R) Metal Box Controllers Welded steel box with polyester powder paint finish 85.0 mm 84.0 mm 115/230V ac or 24V dc supply voltage Floating blanking and selectable auto power-up 295.0 mm 244.0 mm Optional fixed blanking, muting and External Device Monitoring (EDM) Latch or trip output 260.0 mm NEMA 13, IEC IP64 housing 210.0 mm MINI-SCREEN Metal Box Controller (MSCA-1 shown) MINI-SCREEN Metal Box Controller with Muting (MSCC-2T2M shown) MINI-SCREEN(R) Series, Metal Box Controllers Models Supply Voltage Output Type Safety Output Aux. Floating Outputs* Rating Outputs** Blanking 4 amps MSCT-1 MSCT-1T3 24V dc Download PDF Fixed Blanking -- 6 amps 1 NC 4 amps -- 39022 2-beam No 1- or 2-beam Yes Trip MSCT-2 59664 & 39022 47295 6 amps 1 NC 59664 & 47295 4 amps -- 39022 MSCA-1T3 6 amps 1 NC 59664 & 39022 MSCA-1L2 4 amps -- 55702 6 amps 1 NC MSCA-1L3E* 6 amps 1 NC MSCA-1S2E* 4 amps -- 39022 6 amps 1 NC 39022 4 amps -- 39022 6 amps 1 NC 59664 & 39022 4 amps -- 55702 4 amps -- MSCT-2T3 MSCA-1 Trip MSCA-1L3 115V ac Latch 2 NO 2-beam Trip/Latch Selectable MSCA-1S3E* MSCB-1 No Trip MSCB-1T3 230V ac Latch MSCB-1L2 MSCD-2 115/230V ac Trip MSCD-2T3 More information online at bannerengineering.com 1 NC 59664 & 55702 46904 & 55702 47295 1- or 2-beam 6 amps NC = Normally Closed Relay, NO = Normally Open Relay * The suffix "E" adds external device monitoring input ** All models contain one Reed Relay (see specifications page 73) 64 Data Sheet Yes 59644 & 47295 SAFETY LIGHT SCREENS (R) MINI-SCREEN Systems Models MSCC-2T2M MSCC-2T3M Supply Voltage Output Type 115/230V ac or 24V dc Trip Safety Outputs Output Rating Aux. Floating Outputs** Blanking 4 amps -- 6 amps 1 NC 4 amps -- MSCC-2L3M 115/230V ac or 24V dc Fixed Blanking Data Sheet 64723 2 NO MSCC-2L2M Download PDF SAFETY LIGHT SCREENS MINI-SCREEN(R) Series, Metal Box Controllers with Muting EZ-SCREEN(R) 1- or 2-beam Yes PICO-GUARDTM MICRO-SCREEN(R) 61409 Latch 6 amps 1 NC MINI-SCREEN(R) NC = Normally Closed Relay, NO = Normally Open Relay * All models contain two Reed Relays (see specifications pages 74-75) Note: External Device Monitoring (EDM) standard on all controllers with muting. EZ-SCREEN(R) TYPE 2 MINI-SCREEN(R) DIN Module Controllers Polycarbonate housing with removable terminal blocks and clear cover Detailed Dimensions 24V dc supply voltage 110.0 mm 110.0 mm Floating blanking and selectable auto power-up Latch or trip output 75.0 mm 83.8 mm Dual models for two emitter/ receiver pairs NEMA 1; IP20 housing 149.0 mm 100.0 mm MINI-SCREEN DIN Module Controller (MSDINT-1 shown) MINI-SCREEN Dual DIN Module Controller (MDSDINT-1T2 shown) MINI-SCREEN Series, DIN Module Controllers Models Download PDF Supply Output Safety Output Floating Fixed E-Stop Light Screen Data Voltage Type Outputs* Rating Blanking Blanking Input Pairs/Controller Sheet Trip MSDINT-1 2-beam Latch MSDINT-1L2 4 amps No Trip 1- or 2-beam MDSDINT-1L2 44895 1 Pair 2 NO 24V dc MDSDINT-1T2 No 47297 & 60159 Yes Latch 2 Pairs NC = Normally Closed Relay, NO = Normally Open Relay * In addition to safety outputs, all models contain either one or two non-safety Reed Relay auxiliary outputs (see specifications pages 76-77). More information online at bannerengineering.com 65 SAFETY LIGHT SCREENS EZ-SCREEN(R) PICO-GUARDTM MICRO-SCREEN(R) MINI-SCREEN(R) Interfacing Products Models Muting Modules SAFETY LIGHT SCREENS MINI-SCREEN(R) Systems Download PDF Description MM-TA-12B MMD-TA-12B MMD-TA-11B Product Information Data Sheet 63517 * The Muting Module temporarily inhibits a safety light screen so materials can safely pass through the screen without stopping the machinery. * The module uses redundant microcontrollerbased logic. Page 123 * Pairs of contactors create safety stop circuits with two normally open contacts in series. * MINI-SCREEN can monitor the circuit because of the contacts' force-guided mechanically linked design. * Contactors add 10 or 16 amp current carrying capability to any safety system. * Auxiliary contacts add 3 or 4 normally open contacts. * Suppressors extend the life of an actuating device that uses a contactor. * Modular design simplifies assembly and installation. Page 186 116390 (R) MINI-SCREEN Mechanically Linked Contactors (R) EZ-SCREEN TYPE 2 11-BG00-31-A12060 11-BG00-31-D-024 Contactors 11-BF1601-12060 11-BF16C01-024 Aux. Contacts 11-BGX10-40 11-G484-30 Suppressors 11-BGX77-048 11-BGX77-240 11-G318-48 11-G477-240 66 More information online at bannerengineering.com 111881 SAFETY LIGHT SCREENS (R) MINI-SCREEN Systems You can purchase a kit that contains an emitter and receiver of equal length and range; standard mounting brackets; and a pair of quick-disconnect cables. Detailed information about individual kit components is as follows. * Metal Box Controllers - Floating Blanking . . . . . . . . . . . . . . . . . . Page 64 SAFETY LIGHT SCREENS MINI-SCREEN(R) Metal Box Controller Kits - Floating Blanking * Emitter and Receivers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59-63 EZ-SCREEN(R) * Cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 179 PICO-GUARDTM * Brackets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 190 * MSKT24243C2 * MSKT24243C2Y * MSXLHDKT24123C2Y * MSKA24243C2 * MSKA24243C2Y * MSXLHDKA24123C2Y * MSKB24243C2 * MSKB24243C2Y 38 mm 610 mm * * 12 QD Ca bling Numb Ou t puer o f ts t Ty pe 9m 25 mm 115V ac 18 m 12 19 mm Trip 2 NO Safety 8 m, Outputs 2 each & 1 NC Aux. 18 m 9m 24 25 mm 38 mm Ou t pu S u p pl Vol t agy e Range 18 m 24 38 mm * MSXLHDKB24123C2Y 24V dc 18 m 19 mm * MSXLKB24243C2 MSXLKB24243C2Y 25 mm * MICRO-SCREEN(R) 9m 24 * MSXLKA24243C2 MSXLKA24243C2Y 19 mm * MSXLKT24243C2 MSXLKT24243C2Y B e am Foo t s Per Kit Model Number Re s ol HeavyDuty Yellow Black Yellow De fine A r ea d Sensor Housing u t io n A partial listing of kits is listed below; see Kit Model Key to order other variations. 230V ac 18 m 12 18 m NC = Normally Closed Relay, NO = Normally Open Relay Kit Model Key Model Style Emitter/Receiver Separation Kit Supply Voltage M S X L K A Options Defined Area Beams Per Foot 2 4 2 4 Model Style MS = MINI-SCREEN Kit K = Kit Max. Emitter/Receiver Separation Blank = 9 m XL = 18 m XLHD = Heavy-Duty 18 m Supply Voltage A = 115V ac B = 230V ac T = 24V dc Options E = With External Device Monitoring (EDM) Blank = Without Output Output QD Cables Type Configuration 3 C 2 Output Configuration Blank= 2 NO Safety Outputs 3 = 2 NO Safety Outputs & 1 NC Aux. Defined Area 4 = 114 mm 8 = 215 mm 12 = 305 mm 16 = 406 mm 20 = 508 mm 24 = 610 mm 28 = 711 mm 32 = 813 mm 36 = 914 mm 40 = 1016 mm 44 = 1118 mm 48 = 1219 mm Output Type Blank = Trip L = Latch S = Trip/Latch Selectable Beams per Foot 24 = Standard & Long-Range Series 12 = Heavy-Duty Series Finish Sensor Cable Termination Y P Sensor Cable Termination Blank = Integral QD connector P = Pigtail QD Sensor Finish Blank = Black anodized Y = Yellow polyester paint Quick-Disconnect Cables C1 = 2 x 5 m C2 = 2 x 8 m C3 = 1 x 5 m plus 1 x 8 m NOTE: Not all combinations are possible. Contact Banner Engineering Corp. for additional information and/or verification of valid kit model number. More information online at bannerengineering.com 67 MINI-SCREEN(R) EZ-SCREEN(R) TYPE 2 SAFETY LIGHT SCREENS SAFETY LIGHT SCREENS MINI-SCREEN(R) Systems MINI-SCREEN(R) Metal Box Kits - Floating & Fixed Blanking You can purchase a kit that contains an emitter and receiver of equal length and range; standard mounting brackets; and a pair of quick-disconnect cables. Detailed information about individual kit components is as follows. * Metal Box Controllers - Floating & Fixed Blanking . . . . . . . . . . . Page 64 * Emitter and Receivers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59-63 EZ-SCREEN(R) * Cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 179 PICO-GUARDTM * Brackets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 190 MSK2T24243C2 * 19 mm * 25 mm * MSK2T24243C2Y MSXLK2T24243C2 * MSXLHDK2T24123C2Y 610 mm * MSK2D24243C2 * MSXLHDK2D24123C2Y 12 QD Ca bling Numb Ou t puer o f ts t Ty pe Ou t pu 24V dc 18 m Trip 9m 25 mm * MSXLK2D24243C2Y 38 mm 24 * MSXLK2D24243C2 18 m 19 mm * MSK2D24243C2Y 9m 24 * MSXLK2T24243C2Y Range Kit Model Number B e am Foo t s Per HeavyDuty Yellow Black Yellow Re s ol De fine A r ea d EZ-SCREEN(R) TYPE 2 u t io n Sensor Housing MINI-SCREEN(R) S u p pl Vol t agy e A partial listing of kits is listed below; see Kit Model Key to order other variations. MICRO-SCREEN(R) 18 m 38 mm 12 2 NO Safety 8 m, Outputs 2 each & 1 NC Aux. 115/230V ac 18 m NC = Normally Closed Relay, NO = Normally Open Relay Kit Model Key Model Style Emitter/Receiver Separation Kit Blanking Supply Voltage Defined Area Beams Per Foot M S X L K 2 D 2 4 2 4 Output QD Cables Configuration 3 C 2 Model Style MS = MINI-SCREEN Finish Sensor Cable Termination Y P Sensor Cable Termination Blank = Integral QD connector P = Pigtail QD Kit K = Kit Max. Emitter/Receiver Separation Blank = 9 m XL = 18 m XLHD = Heavy-Duty 18 m Blanking 2 = Floating & Fixed Blanking Supply Voltage D = 115/230V ac T = 24V dc Defined Area 4 = 114 mm 8 = 215 mm 12 = 305 mm 16 = 406 mm 20 = 508 mm 24 = 610 mm 28 = 711 mm 32 = 813 mm 36 = 914 mm 40 = 1016 mm 44 = 1118 mm 48 = 1219 mm Output Configuration Blank= 2 NO Safety Outputs 3 = 2 NO Safety Outputs & 1 NC Aux. Sensor Finish Blank = Black anodized Y = Yellow polyester paint Quick-Disconnect Cables C1 = 2 x 5 m C2 = 2 x 8 m C3 = 1 x 5 m plus 1 x 8 m Beams per Foot 24 = Standard & Long-Range Series 12 = Heavy-Duty Series NOTE: Not all combinations are possible. Contact Banner Engineering Corp. for additional information and/or verification of valid kit model number. 68 More information online at bannerengineering.com SAFETY LIGHT SCREENS (R) MINI-SCREEN Systems You can purchase a kit that contains an emitter and receiver of equal length and range; standard mounting brackets; and a pair of quick-disconnect cables. Detailed information about individual kit components is as follows. * Metal Box Controllers with Muting - Floating & Floating Blanking . . . . . . . .Page 65 SAFETY LIGHT SCREENS MINI-SCREEN(R) Metal Box with Muting Kits - Floating & Fixed Blanking * Emitter and Receivers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59-63 EZ-SCREEN(R) * Cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 179 PICO-GUARDTM * Brackets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 190 * MSK2CM24243C2 19 mm * MSK2CM24243C2Y * MSXLK2CM24243C2 610 mm * MSXLK2CM24243C2Y * MSXLHDK2CM24123C2Y 25 mm 18 m 12 Trip QD Ca bling Numb Ou t puer o f ts t Ty pe 115/230V ac or 24V dc MICRO-SCREEN(R) MINI-SCREEN(R) Ou t pu 9m 24 38 mm S u p pl Vol t agy e Range Re s ol De fine A r ea d HeavyDuty Yellow Black Yellow Kit Model Number u t io n Sensor Housing B e am Foo t s Per A partial listing of kits is listed below; see Kit Model Key to order other variations. 2 NO Safety 8 m, Outputs 2 each & 1 NC Aux. 18 m NC = Normally Closed Relay, NO = Normally Open Relay Kit Model Key Model Emitter/Receiver Kit Style Separation M S X L Model Style MS = MINI-SCREEN K Blanking Supply Voltage 2 C Muting Defined Area Beams Per Foot M 2 4 2 4 Output Type No. of Outputs QD Cables C 2 Output Type Blank = Trip L = Latch Kit K = Kit Muting Function M = Muting Max. Emitter/Receiver Separation Blank = 9 m XL = 18 m XLHD = Heavy-Duty 18 m Blanking 2 = Floating & Fixed Blanking Defined Area 4 = 114 mm 8 = 215 mm 12 = 305 mm 16 = 406 mm 20 = 508 mm 24 = 610 mm 28 = 711 mm 32 = 813 mm 36 = 914 mm 40 = 1016 mm 44 = 1118 mm 48 = 1219 mm Y P Sensor Finish Blank = Black anodized Y = Yellow polyester paint Sensor Cable Termination Blank = Integral QD connector P = Pigtail QD Number of Outputs Blank= 2 NO Safety Outputs 3 = 2 NO Safety Outputs & 1 NC Aux. Supply Voltage C = 115/230V ac or 24V dc Finish Sensor Cable Termination Quick-Disconnect Cables C1 = 2 x 5 m C2 = 2 x 8 m C3 = 1 x 5 m plus 1 x 8 m Beams per Foot 24 = Standard & Long-Range Series 12 = Heavy-Duty Series NOTE: Not all combinations are possible. Contact Banner Engineering Corp. for additional information and/or verification of valid kit model number. More information online at bannerengineering.com 69 EZ-SCREEN(R) TYPE 2 SAFETY LIGHT SCREENS SAFETY LIGHT SCREENS MINI-SCREEN(R) Systems MINI-SCREEN(R) DIN Module Controller Kits - Floating Blanking You can purchase a kit that contains an emitter and receiver of equal length and range; standard mounting brackets; and a pair of quick-disconnect cables. Detailed information about individual kit components is as follows. * DIN Module Controllers - Floating Blanking. . . . . . . . . . . . . . . . . Page 65 * Emitter and Receivers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59-63 EZ-SCREEN(R) * Cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 179 PICO-GUARDTM * Brackets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 190 * MSDKT2424C2 19 mm * MSDKT2424C2Y * MSXLDKT2424C2 610 mm * MSXLDKT2424C2Y * MSXLHDKT2412C2Y QD Ca bling Numb Ou t puer o f ts t Ty pe 9m 24 25 mm 38 mm Ou t pu S u p pl Vol t agy e Kit Model Number Range HeavyDuty Yellow Black Yellow B e am Foo t s Per EZ-SCREEN TYPE 2 De fine A r ea d Sensor Housing (R) Re s ol MINI-SCREEN(R) u t io n A partial listing of kits is listed below; see Kit Model Key to order other variations. MICRO-SCREEN(R) 24V dc 18 m 12 Trip 2 NO Safety Outputs 8 m, 2 each 18 m NC = Normally Closed Relay, NO = Normally Open Relay Kit Model Key Model Style* Emitter/Receiver Separation Kit Supply Voltage Defined Area Beams Per Foot M S X L D K T 2 4 2 4 Model Style* MS = MINI-SCREEN Kit DK = DIN-style controller Kit Output Type QD Cables C 2 Output Type Blank = Trip L = Latch Supply Voltage T = 24V dc Max. Emitter/Receiver Separation Blank = 9 m XL = 18 m XLHD = Heavy-Duty 18 m Defined Area 4 = 114 mm 8 = 215 mm 12 = 305 mm 16 = 406 mm 20 = 508 mm 24 = 610 mm 28 = 711 mm 32 = 813 mm 36 = 914 mm 40 = 1016 mm 44 = 1118 mm 48 = 1219 mm Finish Sensor Cable Termination Y Sensor Cable Termination Blank = Integral QD connector P = Pigtail QD Sensor Finish Blank = Black anodized Y = Yellow polyester paint Beams per Foot 24 = Standard & Long-Range Series 12 = Heavy-Duty Series Quick-Disconnect Cables C1 = 2 x 5 m C2 = 2 x 8 m C3 = 1 x 5 m plus 1 x 8 m * Kits are not available for Dual DIN Modules. A controller, two emitter/receiver pairs and the appropriate cables are sold separately (see page 179). NOTE: Not all combinations are possible. Contact Banner Engineering Corp. for additional information and/or verification of valid kit model number. 70 More information online at P bannerengineering.com SAFETY LIGHT SCREENS (R) MINI-SCREEN Systems SAFETY LIGHT SCREENS MINI-SCREEN(R) Emitter & Receiver Specifications Emitter/Receiver Separation 19 mm Resolution Emitters and Receivers: 150 mm to 9 m 25.4 mm Resolution Emitters and Receivers: 150 mm to 18 m Minimum Object Sensitivity 19 mm Resolution: 19.1 mm floating blanking OFF 31.8 mm 1-beam floating blanking ON 44.5 mm 2-beam floating blanking ON Response Time Less than 48 milliseconds using emitter/receiver with 114 to 406 mm defined area Less than 60 milliseconds using emitter/receiver with 508 to 813 mm defined area Less than 72 milliseconds using emitter/receiver with 914 to 1219 mm defined area 25.4 mm Resolution: 25.4 mm floating blanking OFF 38.1 mm 1-beam floating blanking ON 50.8 mm 2-beam floating blanking ON EZ-SCREEN(R) PICO-GUARDTM Self-Checking Interval 20 milliseconds Ambient Light Immunity >10,000 lux at 5 angle of incidence Strobe Light Immunity Totally immune to one Federal Signal Corp. "Fireball" model FB2PST strobe. Emitter Elements Infrared LEDs; 880 nm peak emission Status Indicators Emitter: Green LED for power ON Receiver: Red, yellow and green status indicators with the same functions as those on the left side of the control box (see individual Control Box Specifications, pages 73-77). Yellow also indicates alignment. Indicators are visible on three sides of receiver or emitter base. Emitter and Receiver Enclosures Materials: Aluminum extrusion with black anodized or yellow polyester painted finish; acrylic lens cover Mounting hardware supplied Rating: NEMA 4, 13; IEC IP65 Mounting Hardware Emitter and receiver are each supplied with a pair of mounting brackets. Mounting brackets are 11-gauge coldrolled black zinc chromate finished steel. A set of four vibration dampening mounts is also supplied. Cables Emitters and Receivers with Pigtail (MSE/MSRxxxxYP) Quick Disconnect: Pigtail QD connectors have a 305 mm long cable, terminated with a 5-pin Mini-style quick-disconnect fitting. Mating interconnect cables are ordered separately (unless a MINI-SCREEN kit is ordered, see Models and Accessories, page 179), and are available in lengths of 4.5 m, 7.6 m, 15 m, 30 m and 45 m. MICRO-SCREEN(R) MINI-SCREEN(R) EZ-SCREEN(R) TYPE 2 NOTE: Contact factory when cable length exceeding 53 m is required. Use only Banner cables, which incorporate a shielded "twisted pair" for noise immunity on RS485 data communications lines. Use of other cables may result in "nuisance" trips or lockouts. Optical Performance This system meets 2.5 requirements of IEC 61496-2, section 5.2.9 (Type 4) Operating Conditions Temperature: 0 to +50 C Certifications For a list of certifications see page 236. Relative humidity: 95% maximum (non-condensing) More information online at bannerengineering.com 71 SAFETY LIGHT SCREENS SAFETY LIGHT SCREENS MINI-SCREEN(R) Systems MINI-SCREEN(R) Heavy-Duty Emitter & Receiver Specifications Emitter/Receiver Separation 150 mm to 18 m Minimum Object Sensitivity 38 mm floating blanking OFF 62 mm 1-beam floating blanking ON 89 mm 2-beam floating blanking ON Response Time Less than 48 milliseconds for 610 mm and 813 mm emitter/receiver Less than 60 milliseconds for 1016 mm to 1626 mm emitter/receiver Less than 72 milliseconds for 1829 mm emitter/receiver Self-Checking Interval 20 milliseconds Ambient Light Immunity >10,000 lux at 5 angle of incidence Strobe Light Immunity Totally immune to one Federal Signal Corp. "Fireball" model FB2PST strobe. Emitter Elements Infrared LEDs; 880 nm peak emission Status Indicators Emitter: Green LED for power ON Receiver: Red, yellow and green status indicators with the same functions as those on the left side of the control box (see individual Control Box Specifications, pages 73-77). Yellow also indicates alignment. Indicators are visible on three sides of receiver or emitter base. Emitter and Receiver Enclosures Materials: Aluminum extrusion with yellow polyester painted finish; acrylic lens cover. Mounting hardware supplied. Rating: NEMA 4, 13; IEC IP65 Mounting Hardware Emitter and receiver are each supplied with a pair of mounting brackets. Mounting brackets are 8-gauge coldrolled black zinc chromate finished steel. Cables Emitters and Receivers with Pigtail (MSXLHDE/MSXLHDRxxxxYP) Quick Disconnect: Pigtail QD connectors have a 305 mm long cable, terminated with a 5-pin Mini-style quick-disconnect fitting. Mating interconnect cables are ordered separately (unless a MINI-SCREEN kit is ordered, see Models and Accessories, page 179), and are available in lengths of 4.5 m, 7.6 m, 15 m, 30 m and 45 m. EZ-SCREEN(R) PICO-GUARDTM MICRO-SCREEN(R) MINI-SCREEN(R) (R) EZ-SCREEN TYPE 2 NOTE: Contact factory when cable length exceeding 53 m is required. Use only Banner cables, which incorporate a shielded "twisted pair" for noise immunity on RS485 data communications lines. Use of other cables may result in "nuisance" trips or lockouts. Optical Performance This system meets 2.5 requirements of IEC 61496-2, section 5.2.9 (Type 4) Operating Conditions Temperature: 0 to +50 C Certifications For a list of certifications see page 236. 72 More information online at Relative humidity: 95% maximum (non-condensing) bannerengineering.com SAFETY LIGHT SCREENS (R) MINI-SCREEN Systems SAFETY LIGHT SCREENS MINI-SCREEN(R) Metal Box Controller Specifications System Power Requirements MSCA-.. models: 115V ac 15% (50/60 Hz), 55 VA MSCB-.. models: 230V ac 15% (50/60 Hz), 55 VA MSCT-.. models: 24V dc 15%, 10% max. ripple, 1.5 amps max. MSCD-.. models: 115/230V ac 15% (50/60 Hz), 55 VA Fuse Rating MSCA-1.. models: 1/2 amp, 250V (3 AG or 5x20 mm slow blow) MSCB-1.. models: 1/4 amp, 250V (3 AG or 5x20 mm slow blow) MSCT-1.. models: 2 amp, 250V (3 AG or 5x20 mm slow blow) MSCD-2.. models: 115V ac: 1 amp, 250V; 230V ac: 1/2 amp, 250V MSCT-2.. models: 2 amp, 250V (all fuses 3 AG or 5x20 mm slow blow) Response Time EZ-SCREEN(R) PICO-GUARDTM Standard and Long-Range Emitters/Receivers: Less than 48 milliseconds using emitter/receiver with 114 mm to 406 mm defined area Less than 60 milliseconds using emitter/receiver with 508 mm to 813 mm defined area Less than 72 milliseconds using emitter/receiver with 914 mm to 1219 mm defined area MICRO-SCREEN(R) MINI-SCREEN(R) EZ-SCREEN(R) TYPE 2 Heavy-Duty Emitters/Receivers: Less than 48 milliseconds using emitter/receiver with 610 mm to 813 mm defined area Less than 60 milliseconds using emitter/receiver with 1016 mm to 1626 mm defined area Less than 72 milliseconds using emitter/receiver with 1829 mm defined area Status Indicators Solid LED BLOCKED/LATCHED CLEAR RESET Flashing LED LOCKOUT BLANKING ON Double Flash = Waiting for Power-up Key Reset Single Flash = ALIGNMENT. Flash rate increases with the number of sensing beams "made", solid yellow when aligned and defined area is clear (on control box and receiver) Red Green Yellow Diagnostic Indicators MSCT-2.. & MSCD-2..: Two-digit numeric display indicates cause of lockout condition. Display is visible through a window in the control box cover. MSCA-1.., MSCB-1.. & MSCT-1..: Four LEDs indicate cause of lockout condition. Diagnostic LEDs are visible through a window in the control box cover. Controls and Adjustments Keyed Reset of system lockout or latched conditions Floating Blanking selection switches and Fixed Blanking programming switches Auto Power Up On-Off switches Test Input Terminals must be closed for a minimum of 0.05 seconds in order to guarantee a test input signal. The switching device used must be capable of switching 15-50V dc at 20 to 100 mA. External Device Monitoring (EDM) Input Terminals must be closed before controller attempts to reset (close) the FSD outputs after clearing an interruption of the defined area. The EDM input should open when the FSD outputs close (a clear condition), but this is not required. The EDM input must be closed within 200 milliseconds of the FSD outputs opening (a blocked condition) or a lockout condition will occur. The contacts of the monitored device must be capable of switching 15-50V dc at 20 to 100 mA. Auxiliary Monitor Relay Reed relay; 125V ac or dc max., 500 mA max. (10 VA max., resistive load) Safety Outputs Forced-guided contact relay (resistive load). MSC..-..2: FSD1 & 2, SSD = 250V ac max., 4 amp max. MSC..-..3: FSD1 & 2, CNC = 250V ac max., 6 amp max.; SSD = 250V ac max., 4 amp max Mechanical life: 10,000,000 operations (minimum). Electrical life: 100,000 operations (typical @ 1.0 kVA switching power). Arc suppression is recommended when switching inductive loads. Enclosure Material: Welded steel box with black polyester powder paint finish. Rating: NEMA 13, IEC IP64 Operating Conditions Temperature: 0 to +50 C FMEA Tested Per requirements IEC 61496-1 (type 4) Application Notes Use of fixed blanking requires sensors with 16 or more light beams. Up to 12 beams or 30% of the total number of beams in the array may be blanked, whichever is less. Call factory for applications assistance if a greater number of blanked beams is required. Certifications For a list of certifications see page 236. Wiring Diagrams 2 FSDs, 1 SSD and Power Monitoring: WD022 (p. 258) Relative humidity: 95% maximum (non-condensing) More information online at bannerengineering.com 73 SAFETY LIGHT SCREENS SAFETY LIGHT SCREENS MINI-SCREEN(R) Systems EZ-SCREEN(R) MINI-SCREEN(R) Metal Box Controller with Muting Specifications System Power Requirements 115V ac (50/60Hz) 15% @ 500 mA (50 VA), 230V ac (50/60Hz) 15% @ 250 mA (50 VA), or 24V dc 15%, 10% max. ripple, @ 2.5 A (60 W) Fuse Rating 115V ac: 1.0 A @ 250V ac (supplied) 230V ac: 500 mA @ 250V ac +24V dc: Internal resettable Response Time Standard and Long-Range Emitters/Receivers: Less than 58 milliseconds using emitter/receiver with 114 mm to 406 mm defined area Less than 70 milliseconds using emitter/receiver with 508 mm to 813 mm defined area Less than 82 milliseconds using emitter/receiver with 914 mm to 1219 mm defined area PICO-GUARDTM MICRO-SCREEN(R) Heavy-Duty Emitters/Receivers: Less than 58 milliseconds using emitter/receiver with 610 mm to 813 mm defined area Less than 70 milliseconds using emitter/receiver with 1016 mm to 1626 mm defined area Less than 82 milliseconds using emitter/receiver with 1829 mm defined area MINI-SCREEN(R) EZ-SCREEN(R) TYPE 2 Status Indicators (on control box and receiver) Standard models: Light Screen Indicators (left column of LEDs): Solid LED Flashing LED Red BLOCKED/LATCHED LOCKOUT Green CLEAR BLANKING ON Yellow RESET Double Flash = Waiting for Light Screen Key Reset at Power-up Single Flash = ALIGNMENT. Flash rate increases with the number of sensing beams "made", solid yellow when aligned and defined area clear System Indicators (right column of LEDs): Solid LED Flashing LED Red OVERRIDE LOCKOUT Green OUTPUT ON (Not Applicable) (FSD1 & FSD2 closed) Yellow RESET Double Flash = Waiting for System Key Reset at Power-up (System) Single Flash = Waiting for System Key Reset at latched condition (manual reset of system after blockage has been removed) Diagnostic Indicators Light Screen Diagnostic Display (left window) is a two-digit numeric display that indicates the cause of lockout conditions. System Diagnostic Display (right window) is a two-digit numeric display that indicates the cause of lockout conditions and the amount of time, in seconds, remaining for the backdoor timer. Controls and Adjustments * Light Screen Key Reset after power-up and light screen lockouts * Selection switches to enable floating blanking * Program switches to enable fixed blanking * Light Screen and System Auto Power-up selection switches * System Key Reset after power-up, system lockouts, and latched conditions * Selection switches for Monitored or Non-Monitored Muting Indicator * Selection switches for One-Way or Two-Way (directional/non-directional) Muting * Selection switches for One-Channel, Two-Channel Monitoring or No Monitoring (EDM) * Selection switches for Backdoor Timer settings and Mute-on-Power-Up Light Screen and System Reset Inputs Terminals must be closed for a minimum of 0.05 seconds in order to guarantee a reset. The switching device must be capable of switching 15-50V dc at 20-100 mA. External Device Monitoring (EDM) Input(s) Two pairs of terminals are provided to monitor the state of external devices that are being controlled by the FSD outputs. The device must be capable of switching 15-50V dc at 20-100 mA. Mute Enable Input Terminals must be closed in order to start a mute; opening this input after mute has begun has no effect. The switching device must be capable of switching 15-50V dc at 20-100 mA. Override Inputs The two-channel inputs must be closed within 3 seconds of each other (simultaneity requirement) and held closed during the 10-second Override. To initiate a subsequent Override, open both channels, wait 3 seconds, and then re-close both channels (within 3 seconds). The switching devices must be capable of switching 15-50V dc at 20-100 mA. Muting Device Input The muting devices work in pairs (M1 and M2, M3 and M4) and are required to be "closed" within 3 seconds of each other (simultaneity requirement) to initiate a mute (assuming all other conditions are met). Each muting device must be capable of switching 15-50V dc at 20-100 mA. Light Screen and System Aux. Monitor Relay Outputs Reed relay; 125V ac/dc max. at 500 mA max. (10 VA maximum, resistive load) 74 More information online at bannerengineering.com SAFETY LIGHT SCREENS (R) MINI-SCREEN Systems CNC Aux. Monitor Relay Outputs Forced-guided contact relay, 250V ac at 6 amps max. (resistive load) (Model MSCC-2T3M/-2L3M) Safety Outputs Mute Lamp Output Forced-guided contact relay (resistive load). MSCC-..2: FSD1 & 2, SSD = 250V ac max., 4 amp max. MSCC-..3: FSD1 & 2, CNC = 250V ac max., 6 amp max.; SSD = 250V ac max., 4 amp max. Mechanical life: 10,000,000 operations (minimum). Electrical life: 100,000 operations (typical @ 1.0 kVA switching power). Arc suppression is recommended when switching inductive loads. EZ-SCREEN(R) PICO-GUARDTM MICRO-SCREEN(R) A monitored or non-monitored (selectable) sinking output. If monitoring has been selected, the current draw must be within 10 mA to 360 mA. Max. switching voltage: 30V dc Max. switching current: 360 mA Min. switching current: 10 mA Saturation voltage: 1.5V dc Auxiliary DC Supply Output 24V dc 25%, 500 mA max Enclosure Material: Welded steel box with black polyester powder paint finish. Rating: NEMA 13; IEC IP64 Operating Conditions Temperature: 0 to +50 C FMEA Tested Per requirements IEC 61496-1 (Type 4) Application Notes Use of fixed blanking requires sensors with 16 or more light beams. Up to 12 beams or 30% of the total number of beams in the array may be blanked, whichever is less. Call factory for applications assistance if a greater number of blanked beams is required. Certifications For a list of certifications see page 236. Wiring Diagrams 2 FSDs, 1 SSD and 2-Channel EDM: WD023 (p. 258) MINI-SCREEN(R) EZ-SCREEN(R) TYPE 2 Relative humidity: 95% max. (non-condensing) More information online at bannerengineering.com SAFETY LIGHT SCREENS (R) (R) MINI-SCREEN Metal Controller Box withwith Muting Specifications (cont'd) MINI-SCREEN Metal Box Controller Muting Specifications 75 SAFETY LIGHT SCREENS SAFETY LIGHT SCREENS MINI-SCREEN(R) Systems MINI-SCREEN(R) DIN Module Controller Specifications System Power Requirements 24V dc 15%, 10% max. ripple, 1.5 amps. max. Fuse Rating 2 amp, 250V (3 AG or 5x20 mm slow blow) Response Time Standard Emitters/Receivers: Less than 48 milliseconds using emitter/receiver with 114 mm to 406 mm defined area Less than 60 milliseconds using emitter/receiver with 508 mm to 813 mm defined area Less than 72 milliseconds using emitter/receiver with 914 mm to 1219 mm defined area EZ-SCREEN(R) Heavy-Duty Emitters/Receivers: Less than 48 milliseconds using emitter/receiver with 610 mm to 813 mm defined area Less than 60 milliseconds using emitter/receiver with 1016 mm to 1626 mm defined area Less than 72 milliseconds using emitter/receiver with 1829 mm defined area PICO-GUARDTM MICRO-SCREEN(R) MINI-SCREEN(R) Status Indicators Solid LED BLOCKED/LATCHED CLEAR RESET Flashing LED LOCKOUT BLANKING ON Double Flash = Waiting for Power-up Key Reset Single Flash = ALIGNMENT. Flash rate increases with the number of sensing beams "made", solid yellow when aligned and defined area is clear (on control box and receiver) Red Green Yellow Diagnostic Indicators Four LEDs indicate cause of lockout conditions. Diagnostic LEDs are visible through a window in the control module cover. Controls and Adjustments Keyed Reset of system lockout and latched conditions Blanking selection switches Auto Power Up On-Off switches Auxiliary Monitor or Alarm Relay Reed relay; 125V ac or dc max., 500 mA max. (10 VA max., resistive load) Safety Outputs Forced-guided contact relays (resistive load) FSD1 & 2, SSD = 250V ac max., 4 amps max. Mechanical life: 10,000,000 operations (minimum) Electrical life: 100,000 operations (typical @ 1.0 kVA switching power) Arc suppression is recommended when switching inductive loads. Enclosure Material: polycarbonate Rating: NEMA 1; IEC IP20 Operating Conditions Temperature: 0 to +50 C FMEA Tested Per requirements of proposed first edition of IEC 61496-1 (Type 4) Certifications For a list of certifications see page 236. Wiring Diagrams 2 FSDs, 1 SSD and Power Monitoring: WD024 (p. 259) EZ-SCREEN(R) TYPE 2 76 More information online at Relative humidity: 95% maximum (non-condensing) bannerengineering.com SAFETY LIGHT SCREENS (R) MINI-SCREEN Systems SAFETY LIGHT SCREENS MINI-SCREEN(R) Dual DIN Module Controller Specifications System Power Requirements 24V dc 15%, 10% max. ripple, 2.5 amps max. Fuse Rating 2 amp, 250V (3 AG or 5x20 mm slow blow) Response Time Standard and Long-Range Emitters/Receivers: Less than 48 milliseconds using emitter/receiver with 114 mm to 406 mm defined area Less than 60 milliseconds using emitter/receiver with 508 mm to 813 mm defined area Less than 72 milliseconds using emitter/receiver with 914 mm to 1219 mm defined area EZ-SCREEN(R) Heavy-Duty Emitters/Receivers: Less than 48 milliseconds using emitter/receiver with 610 mm to 813 mm defined area Less than 60 milliseconds using emitter/receiver with 1016 mm to 1626 mm defined area Less than 72 milliseconds using emitter/receiver with 1829 mm defined area PICO-GUARDTM MICRO-SCREEN(R) MINI-SCREEN(R) E-Stop: Less than 15 milliseconds Status Indicators Solid LED BLOCKED/LATCHED CLEAR RESET Flashing LED LOCKOUT BLANKING ON Double Flash = Waiting for Power-up Key Reset Single Flash = ALIGNMENT. Flash rate increases with the number of sensing beams "made", solid yellow when aligned and defined area is clear EZ-SCREEN(R) TYPE 2 (on control box and receiver) Red Green Yellow Diagnostic Indicator Single-digit alphanumeric display indicates cause of lockout condition. Controls and Adjustments Keyed Reset of system lockout and latched conditions Blanking selection switches Auto Power Up On-Off switches E-Stop Switch Input Emergency stop switch must offer two normally closed contacts and be capable of switching 50 mA @ 30V dc. Simultaneity less than 100 milliseconds. Total resistance, including wiring and all switches, must not exceed 30 for proper operation. Functional stop category 0 per NFPA 79 and EN 418, Safety Category 4 per EN 954-1. Auxiliary Monitor Relay (x2) Reed relay; 125V ac or dc max., 500 mA max. (10 VA max., resistive load) Safety Outputs Forced-guided contact relays (resistive load) FSD1 & 2, SSD = 250V ac max., 4 amps max. Mechanical life: 10,000,000 operations (minimum) Electrical life: 100,000 operations (typical @ 1.0 kVA switching power) Arc suppression is recommended when switching inductive loads. Enclosure Material: Polycarbonate Rating: NEMA 1; IEC IP20 Operating Conditions Temperature: 0 to +50 C FMEA Tested Per requirements of proposed first edition of IEC 61496-1 (Type 4) Certifications For a list of certifications see page 236. Wiring Diagrams 2 FSDs, 1 SSD and Power Monitoring: WD025 (p. 259) Relative humidity: 95% maximum (non-condensing) More information online at bannerengineering.com 77 SAFETY LIGHT SCREENS SAFETY LIGHT SCREENS EZ-SCREEN(R) TYPE 2 Systems EZ-SCREEN(R) PICO-GUARDTM MICRO-SCREEN(R) MINI-SCREEN(R) EZ-SCREEN(R) TYPE 2 (R) EZ-SCREEN Type 2 Light Screens * A low-cost solution is suited to lower-risk applications where the result of an accident is only a slight injury such as a bump, bruise, knockdown or trapping (but not crushing), minor cuts and abrasions. * Simple two-piece system requires no control box. * 30 mm resolution detects narrow objects, such as a hand or ankle across long spans up to 15 m. * System meets all requirements for Type 2 applications per IEC61496-1/-2 and Category 2 per EN 954-1. * System performs internal self-tests, with typical installations requiring additional external safety function checks. * Dedicated models eliminate selectable functions, DIP switches and programming. * Trip output model automatically resets when the beam is cleared; Latch output model requires a manual reset. QD CABLES 8-Pin Euro PAGE 176 * Fast response times of 11 to 25 milliseconds shutdown machinery quickly. Q&A: Type 2 vs Type 4 Choosing Type 2 vs. Type 4 The international standard IEC 61496 specifies requirements for the design, construction and testing for two levels or "types" of light screens to ensure the appropriate safety-related performance. Light Screen Type 2 * Lower cost Cost/features * Single microprocessor * Two safety outputs Functionality See page 180. * Faults detected by self-test or periodic external test * Fault exclusion increases the integrity of the safety function Type 4 * Two microprocessors * Two safety outputs * Control reliable/Category 4 * More features and range * Faults detected by self-test * High levels of fault tolerance through redundancy and monitoring ).$)#!4/23 Effortless diagnostics. PAGE 187 BRACKETS PAGE 190 -)22/23 PAGE 204 34!.$3 PAGE 209 Intuitive EZ-SCREEN Type 2 status LEDs indicate Effective * Larger 5.0 EAA (field-of-view) * Smaller 2.5 EAA (field-of-view) Aperture * More susceptible to optical * Less susceptible to optical short circuits Angle (EAA) short circuits * Power ON * Fault (flashing LED) * Beam alignment, top and bottom * Beam/output status: blocked or clear ,%.3 3()%,$3 Trip Receiver PAGE 213 Latch Receiver Applications Emitter Assessing Risk 78 More information online at bannerengineering.com * High-risk applications that can * Low- to moderate-risk applications where injury is slight result in severe injury or death * Primary safeguard in hazardous * Automated production situations equipment, "table-top" robotic work cells, "pick and place" * Injuries that result in an OSHA machines, small packaging recordable incident machines, equipment protection * Where mandated by a relevant and supplemental safeguarding standard Conduct a risk assessment of your machine. Level of risk depends on the severity of harm and probability of occurrence. In the USA, if severity of harm is high, regardless of probability, you must choose a Type 4 safety light screen. See ISO 14121, ANSI B11 TR3, and ANSI/RIA R15.06 for more specific information. SAFETY LIGHT SCREENS (R) EZ-SCREEN TYPE 2 Systems SAFETY LIGHT SCREENS EZ-SCREEN(R) Type 2 Systems 31.8 mm Economical, compact optical safeguarding Detailed Dimensions Type 2 per IEC 61496-1/-2 30 mm resolution and 15 m range Full View EZ-SCREEN(R) 24V dc supply voltage Latch or trip output PICO-GUARDTM 8-pin Euro QD connection MICRO-SCREEN(R) L QD cables ordered separately (see page 176) MINI-SCREEN(R) EZ-SCREEN(R) TYPE 2 IEC IP65 housing 25.2 mm EZ-SCREEN Type 2 Yellow Painted Aluminum EZ-SCREEN(R) Type 2 Systems, 30 mm Resolution Model Number Resolution Output Range Download PDF Defined Housing Supply Safety Response ConnecArea Length (L) Voltage Outputs Time tion Data Sheet LS2TP30-150Q88 Trip LS2E30-150Q8 LS2TR30-150Q8 150 mm 215 mm 300 mm 365 mm 450 mm 515 mm 11 ms LS2LP30-150Q88 Latch LS2E30-150Q8 LS2LR30-150Q8 LS2TP30-300Q88 Trip LS2E30-300Q8 LS2TR30-300Q8 15 m LS2LP30-300Q88 24V dc LS2E30-300Q8 2 PNP OSSD 13 ms 8-pin Euro QD 122452 30 mm Resolution Latch LS2LR30-300Q8 LS2TP30-450Q88 LS2E30-450Q8 Trip LS2TR30-450Q8 14 ms LS2LP30-450Q88 LS2E30-450Q8 Latch LS2LR30-450Q8 30 mm Resolution A pair includes an emitter and receiver (example, LS2TP30-150Q88). Emitters (example, LS2E30-150Q8) and receivers (example, LS2TR30-150Q8) are sold separately. More information online at bannerengineering.com 79 SAFETY LIGHT SCREENS SAFETY LIGHT SCREENS EZ-SCREEN(R) TYPE 2 Systems EZ-SCREEN(R) Type 2 Systems, 30 mm Resolution (cont'd) Model Number Resolution Output Range Download PDF Defined Housing Supply Safety Response ConnecArea Length (L) Voltage Outputs Time tion Data Sheet LS2TP30-600Q88 LS2E30-600Q8 Trip EZ-SCREEN(R) LS2TR30-600Q8 PICO-GUARDTM LS2LP30-600Q88 LS2E30-600Q8 MICRO-SCREEN(R) 600 mm 665 mm 16 ms 750 mm 815 mm 17 ms 900 mm 964 mm 19 ms Latch LS2LR30-600Q8 MINI-SCREEN(R) LS2TP30-750Q88 (R) EZ-SCREEN TYPE 2 LS2E30-750Q8 Trip LS2TR30-750Q8 LS2LP30-750Q88 LS2E30-750Q8 Latch LS2LR30-750Q8 LS2TP30-900Q88 LS2E30-900Q8 Trip LS2TR30-900Q8 LS2LP30-900Q88 LS2E30-900Q8 Latch LS2LR30-900Q8 15 m LS2TP30-1050Q88 24V dc 2 PNP OSSD 8-pin Euro QD 122452 30 mm Resolution LS2E30-1050Q8 Trip LS2TR30-1050Q8 1050 mm 1114 mm 21 ms 1200 mm 1264 mm 22 ms 1350 mm 1414 mm 24 ms LS2LP30-1050Q88 LS2E30-1050Q8 Latch LS2LR30-1050Q8 LS2TP30-1200Q88 LS2E30-1200Q8 Trip LS2TR30-1200Q8 LS2LP30-1200Q88 LS2E30-1200Q8 Latch LS2LR30-1200Q8 LS2TP30-1350Q88 LS2E30-1350Q8 Trip LS2TR30-1350Q8 LS2LP30-1350Q88 LS2E30-1350Q8 Latch LS2LR30-1350Q8 30 mm Resolution A pair includes an emitter and receiver (example, LS2TP30-600Q88). Emitters (example, LS2E30-600Q8) and receivers (example, LS2TR30-600Q8) are sold separately. 80 More information online at bannerengineering.com SAFETY LIGHT SCREENS (R) EZ-SCREEN TYPE 2 Systems Model Number Resolution Output Range Download PDF Defined Housing Supply Safety Response ConnecArea Length (L) Voltage Outputs Time tion Data Sheet LS2TP30-1500Q88 Trip LS2E30-1500Q8 LS2TR30-1500Q8 15 m LS2LP30-1500Q88 LS2E30-1500Q8 SAFETY LIGHT SCREENS EZ-SCREEN(R) Type 2 Systems, 30 mm Resolution (cont'd) 1500 mm 1563 mm 24V dc 2 PNP OSSD 25 ms 8-pin Euro QD EZ-SCREEN(R) 122452 PICO-GUARDTM 30 mm Resolution Latch MICRO-SCREEN(R) LS2LR30-1500Q8 MINI-SCREEN(R) 30 mm Resolution A pair includes an emitter and receiver (example, LS2TP30-1500Q88). Emitters (example, LS2E30-1500Q8) and receivers (example, LS2TR30-1500Q8) are sold separately. More information online at bannerengineering.com 81 EZ-SCREEN(R) TYPE 2 SAFETY LIGHT SCREENS EZ-SCREEN(R) PICO-GUARDTM MICRO-SCREEN(R) EZ-SCREEN(R) Type 2 Interfacing Products Models Interface Modules SAFETY LIGHT SCREENS EZ-SCREEN(R) TYPE 2 Systems Description IM-T-9A (3 NO) IM-T-11A (2 NO/1 NC) * Interface modules provide two or three normally open force-guided relay outputs rated at 6 A. * EZ-SCREEN monitors these interface modules when they are connected to the EZ-SCREEN External Device Monitoring (EDM) inputs. * Convenient plug-in terminal blocks on a 22.5 mm DIN-rail mountable housing are included. Download PDF Product Information Data Sheet Page 132 62822 MM2-TA-12B MMD-TA-12B MMD-TA-11B Mechanically Linked Contactors 11-BG00-31-D-024 Contactor Products EZ-SCREEN(R) TYPE 2 Muting Modules MINI-SCREEN(R) 11-BF16C01-024 Aux. Contacts 11-BGX10-40 11-G484-30 Suppressors 11-BGX77-048 Page 123 * Pairs of contactors create safety stop circuits with two normally open contacts in series. * EZ-SCREEN can monitor the circuit because of the contacts' force-guided mechanically linked design. * Contactors add 10 or 16 amp current carrying capability to any safety system. * Auxiliary contacts add 3 or 4 normally open contacts. * Suppressors extend the life of an actuating device that uses a contactor. * Modular design simplifies assembly and installation. Page 186 11-G318-48 82 More information online at 63517 * The Muting Module temporarily inhibits a safety light screen so materials can safely pass through the screen without stopping the machinery. * The module uses redundant microcontrollerbased logic. bannerengineering.com 116390 111881 SAFETY LIGHT SCREENS (R) EZ-SCREEN TYPE 2 Systems You can purchase a kit that contains an emitter and receiver of equal length; brackets; and optional interfacing solution and quick-disconnect cables. Detailed information about individual kit components is as follows. * Emitter and Receivers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 79 * Interfacing Options. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82 SAFETY LIGHT SCREENS EZ-SCREEN(R) Type 2 Kits EZ-SCREEN(R) * Cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 176 PICO-GUARDTM * Brackets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 190 MICRO-SCREEN(R) LS2TK30-600Q88-1RE25 LS2TK30-750Q88-1RE25 LS2LK30-750Q88-1RE25 QD Ca bling In t er f Op tionacing s E mi t t e Re c ei r & C onnev er c t io n Ou t pu Ty pe t N o. o f Ou t pu ts S u p pl Vol t agy e Range Re s ol P r o t ec H ei g h t e d t Kit Model Number LS2LK30-600Q88-1RE25 u t io n A partial listing of kits is listed below; see Kit Model Key to order other variations. Trip 600 mm 30 mm 18 m 24V dc Latch 2 OSSD Trip 750 mm Integral Euro QD IM-T-9A, 1 each 8 m, 2 each Latch Kit Model Key Model Style Kit Resolution Protected Height QD Options Interfacing Options QD Cabling Length Options L S 2 T K 3 0 6 0 0 Q 8 8 1 R E 2 5 Model Style LS2T = Type 2 Light Screen (Trip) LS2L = Type 2 Light Screen (Latch) Kit K = Kit QD Cabling Length Options RE15 = 5 m, 2 each RE25 = 8 m, 2 each R15E25 = 5 m (Receiver) & 8 m (Emitter) R25E15 = 8 m (Receiver) & 5 m (Emitter) RE50 = 15 m, 2 each R15E50 = 5 m (Receiver) & 15 m (Emitter) R50E15 = 15 m (Receiver) & 5 m (Emitter) R25E50 = 8 m (Receiver) & 15 m (Emitter) R50E25 = 15 m (Receiver) & 8 m (Emitter) RE75 = 23 m, 2 each RE100 = 30 m, 2 each Resolution 30 = 30 mm Protected Height 150 mm 300 mm 450 mm 600 mm 750 mm 900 mm 1050 mm 1200 mm 1350 mm 1500 mm Receiver & Emitter QD Options Q88 = Receiver with integral 8-pin Euro-style QD Emitter with integral 8-pin Euro-style QD Interfacing Options 1 = IM-T-9A Interface Module, 1 each 2 = IM-T-11A Interface Module, 1 each 3 = 11-BG00-31-D-024 Contactors (10A), 2 each 4 = 11-BF16C01-024 Contactors (16A), 2 each NOTE: Not all combinations are possible. Contact Banner Engineering Corp. for additional information and/or verification of valid kit model number. More information online at bannerengineering.com 83 MINI-SCREEN(R) EZ-SCREEN(R) TYPE 2 SAFETY LIGHT SCREENS SAFETY LIGHT SCREENS EZ-SCREEN(R) TYPE 2 Systems EZ-SCREEN(R) Type 2 Specifications Supply Voltage at the Device* 24V dc 20% (PELV) Supply Current* Emitter: 50 mA max. Receiver: 90 mA max., exclusive of OSSD1 and OSSD2 loads (up to an additional 0.5A each) Wavelength of Emitter Elements Infrared LEDs, 950 nm at peak emission EZ-SCREEN(R) Short Circuit Protection All inputs and outputs are protected from short circuits to +24V dc or dc common* PICO-GUARDTM Electrical Safety Class III (per IEC 61140: 1997) Safety Rating Type 2 per IEC 61496-1, -2; Category 2 per EN 954-1 Operating Range 0.2 m to 15 m Range decreases with use of mirrors and/or lens shields: Lens shields - approximately 10% less range per shield. Glass-surface mirrors - approximately 8% less range per mirror. See Accessory section for more information on a specific mirror, page 204. Effective Aperture Angle (EAA) Meets Type 2 requirements per IEC 61496-2; 5 @ 3 m Ambient Light Immunity > 10,000 lux at 5 angle of incidence Strobe Light Immunity Immune as per IEC 61496-2 Response Time Dependent on number of beams; see Models table on page 79. EDM Input "Power Monitoring" accomplished via Reset/Remote Test input Reset Input / Remote Test Input Connect to +24V dc via a normally closed (NC) reset switch Auto Rest (Trip Output) Models: Test/Reset Manual Rest (Latch Output) Models: Test/Restart/Reset Safety Outputs Two redundant solid-state 24V dc, 0.5 A max. sourcing OSSD (Output Signal Switching Device) safety outputs. (Use optional interface modules for ac or larger dc loads.) Not compatible with the Banner "Safety Handshake." ON-State voltage: > Vin-1.5V dc OFF-State voltage: 0.2V dc max. Max. load capacitance: 0.1 F Min. load resistance: 48 Open ground leakage current: 0.65 mA max. OSSD test pulse width: 0.25 milliseconds OSSD test pulse period: 500 milliseconds Enclosure Materials: Extruded aluminum housing with yellow polyester powder finish and well-sealed, rugged die-cast zinc end caps, acrylic lens cover Rating: IEC IP65 Operating Conditions Temperature: 0 to +55 C Shock and Vibration EZ-SCREEN Type 2 systems have passed vibration and shock tests according to IEC 61496-1. This includes vibration (10 cycles) of 10-55 Hz at 0.35 mm single amplitude (0.70 mm peak-to-peak) and shock of 10 g for 16 milliseconds (6,000 cycles). Certifications For a list of certifications see page 236. Wiring Diagrams Emitter: WD026 (p. 260) Receiver with 2 Solid-State OSSDs, 2 FSDs and Power Monitoring: WD027 (p. 260) Power Monitoring of IM-T-9A Interface Module: WD028 (p. 261) MICRO-SCREEN(R) MINI-SCREEN(R) EZ-SCREEN(R) TYPE 2 Relative humidity: 95% maximum (non-condensing) *The external voltage supply must be capable of buffering brief mains interruptions of 20 milliseconds as specified in IEC/EN 60204-1. 84 More information online at bannerengineering.com