2.0x1.25mm SMD CHIP LED LAMP Part Number: KPHBM-2012SURKCGKC Hyper Red Green Features Description z 2.0mmx1.25mm SMT LED, 0.45mm max. thickness. The Hyper Red source color devices are made with Al- z Bi -color, low power consumption. GaInP on GaAs substrate Light Emitting Diode. z Wide viewing angle. The Green source color devices are made with AlGaInP on z Ideal for backlight and indicator. GaAs substrate Light Emitting Diode. z Package : 2000pcs / reel. z Moisture sensitivity level : level 3. z RoHS compliant. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.1(0.004") unless otherwise noted. 3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAG9036 REV NO: V.9A DATE: MAR/26/2013 PAGE: 1 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.Liu ERP: 1203005979 Selection Guide Part No. Dice Iv (mcd) [2] @ 20mA Lens Type Min. Typ. 120 250 *40 *80 20 50 *20 *50 Viewing Angle [1] 21/2 Hyper Red (AlGaInP) KPHBM-2012SURKCGKC 120 Water Clear Green (AlGaInP) Notes: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity/ luminous Flux: +/-15%. *Luminous intensity value is traceable to the CIE127-2007 compliant national standards. Electrical / Optical Characteristics at TA=25C Symbol Parameter Device Typ. peak Peak Wavelength Hyper Red Green D [1] Dominant Wavelength 1/2 Max. Units Test Conditions 645 574 nm IF=20mA Hyper Red Green 630 570 nm IF=20mA Spectral Line Half-width Hyper Red Green 28 20 nm IF=20mA C Capacitance Hyper Red Green 35 15 pF VF=0V;f=1MHz VF [2] Forward Voltage Hyper Red Green 1.95 2.1 2.5 2.5 V IF=20mA IR Reverse Current Hyper Red Green 10 10 uA VR = 5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. 3. Wavelength value is traceable to the CIE127-2007 compliant national standards. Absolute Maximum Ratings at TA=25C Parameter Hyper Red Green Units Power dissipation 75 75 mW DC Forward Current 30 30 mA Peak Forward Current [1] 185 150 mA Reverse Voltage 5 Operating Temperature -40C To +85C Storage Temperature -40C To +85C V Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAG9036 REV NO: V.9A DATE: MAR/26/2013 PAGE: 2 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.Liu ERP: 1203005979 KPHBM-2012SURKCGKC Hyper Red SPEC NO: DSAG9036 REV NO: V.9A DATE: MAR/26/2013 PAGE: 3 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.Liu ERP: 1203005979 Green SPEC NO: DSAG9036 REV NO: V.9A DATE: MAR/26/2013 PAGE: 4 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.Liu ERP: 1203005979 KPHBM-2012SURKCGKC Reflow soldering is recommended and the soldering profile is shown below. Other soldering methods are not recommended as they might cause damage to the product. Recommended Soldering Pattern (Units : mm; Tolerance: 0.1) Reel Dimension Tape Dimensions (Units : mm) SPEC NO: DSAG9036 REV NO: V.9A DATE: MAR/26/2013 PAGE: 5 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.Liu ERP: 1203005979 PACKING & LABEL SPECIFICATIONS KPHBM-2012SURKCGKC Detailed application notes are listed on our website. http://www.kingbright.com/application_notes SPEC NO: DSAG9036 REV NO: V.9A DATE: MAR/26/2013 PAGE: 6 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.Liu ERP: 1203005979