APPLIANCES /// GRACE INERTIA
GRACE INERTIA Connector Series
Quick Reference Guide
DESIGN-IN QUESTIONS
1. Would you like to help ensure complete mating of the
connectors in your application?
The GRACE INERTIA connector series mates to simultaneously
complete the circuit and then locks for in-connector mating
reliability.
Furthermore, visual inspection for half mating is difficult and is a
cause of complicated inspection processes. The GRACE INERTIA
connector series uses a lock-on mechanism that does not pass
an electric current if it is half mated. This makes it possible to
detect half mated connections during an electrical conductivity
test, which enables you to help prevent defective products
caused by half mating.
2. For what type of application are you seeking a connector?
These connectors can be used in a wide range of products from
home appliances to vending machines and are a solution that
can help eliminate human error during assembly.
3. What are the current and voltage requirements for your
application?
GRACE INERTIA connectors have varying current and voltage
requirements for the various centerline options. Refer to the
chart on page 1 of the quick reference guide to view the current
and voltage capabilities of our various centerline options.
4. What are the wire size and type requirements?
GRACE INERTIA connectors accept wire sizes from #26 to #12
AWG, varying on number of positions and centerline pitch. A
table on page 1 of the quick reference guide provides an
overview. Details about wire size can be found in the 108 product
specifications and 114 application specifications accessible on
te.com. Contact your sales representative for more information.
5. How many positions do you need, and do you need a wire-
to-wire or wire-to-board connector?
The GRACE INERTIA connector series offers both wire-to-
wire and wire-to-board configurations depending on the
centerline. These configurations are available in various positions
depending on the centerline selected. Refer to page 1 of the
quick reference guide to see the positions available for each
centerline.
6. What are the operating temperature requirements?
The GRACE INERTIA connector series has an operating
temperature range from -30°C to +105°C.
7. Is contact back-out a concern?
To ensure the contacts are seated, the GRACE INERTIA
connector series offers optional double lock plates in the 3.3mm
and 3.5mm centerline options. Additional double lock plate
options are coming soon. Talk to your sales representative for
more information.
8. Do you need to differentiate this connector from other
connectors in the application?
The GRACE INERTIA connector series offer multiple options
of colored housings (natural, red, blue, and yellow) for easier
connector identification during manufacturing and assembly.
Multiple keying options are also offered to prevent mismating
between the various plug and header/cap options.
9. Will you be applying a conformal coating to your PC board?
GRACE INERTIA headers are designed to be compatible with
various board coatings.
te.com
GRACE INERTIA, TE, TE Connectivity, TE Connectivity (logo) and Every Connection Counts are trademarks. All other logos, products and/or company names referred to herein
might be trademarks of their respective owners.
The information given herein, including drawings, illustrations and schematics which are intended for illustration purposes only, is believed to be reliable. However, TE
Connectivity makes no warranties as to its accuracy or completeness and disclaims any liability in connection with its use. TE Connectivity‘s obligations shall only
be as set forth in TE Connectivity‘s Standard Terms and Conditions of Sale for this product and in no case will TE Connectivity be liable for any incidental, indirect or
consequential damages arising out of the sale, resale, use or misuse of the product. Users of TE Connectivity products should make their own evaluation to determine
the suitability of each such product for the specific application.
© 2018 TE Connectivity Ltd. family of companies All Rights Reserved.
1-1773883-5 03/18 Revised
TE TECHNICAL SUPPORT CENTER
USA: +1 (800) 522-6752
Canada: +1 (905) 475-6222
Mexico: +52 (0) 55-1106-0800
Latin/S. America +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
UK: +44 (0) 800-267666
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015