GRACE INERTIA CONNECTOR SERIES Quick Reference Guide TE Connectivity's (TE) GRACE INERTIA connector series offers the design-in variety needed for always-on connectivity. GRACE INERTIA connectors employ an inertia locking mechanism to simultaneously complete the circuit and "lock" the connector, which is an excellent solution for helping to eliminate human error during assembly. This feature can improve mating reliability, helps prevent mismatching, and can reduce the need for complicated inspection processes. These wire-to-board and wire-to-wire connectors can be used in a wide range of applications ranging from home appliances and air conditioners to transportation solutions. KEY FEATURES APPLICATIONS AVAILABLE CENTERLINES * Design assures proper insertion, preventing header pin deformation * Washing machines * Inertia locking mechanism helps prevent unintended disconnection * Air conditioners * Household appliances * 3.5 mm * 6.0 mm * Refrigerators * Lanceless contacts prevent snagging or entanglement * Four keying methods and colors * Vending machines * Control cabinets * Dual beam contact design provides good contact and durability * Ergonomic design allows easy assembly * Industrial controls * Industrial machinery * 6.2 mm * 6.5 mm * 7.92 mm * 9.0 mm * 12.4 mm * HVAC systems * Optional double lock plates (TPA devices) available for some models * 3.3 mm * Urethane coating on PCB boards * Transportation solutions GRACE INERTIA CONNECTOR SERIES OVERVIEW Centerline (mm) Current Rating (A) Voltage Rating Wire Size (AWG) Positions Configurations 3.3 4 250 VAC 20-20 4,6,8,10,12 Wire to Board UL 94 V0 3.5 7 300 VAC 26-18 2,3,4,6 Wire to Wire UL 94 V0 6.0 10 600 VAC 24-16 2,3 Wire to Board UL 94 V0 6.2 20 600 VAC 16-12 1,2,3 Wire to Wire 6.5 10 300 VAC 24-16 3 Wire to Board UL 94 V0 7.92 10 300 VAC 24-16 2 Wire to Board UL 94 V0 9.0 20 600 VAC 16-12 3 Wire to Board UL 94 V0 12.4 20 600 VAC 16-12 2 Wire to Board UL 94 V0 APPLIANCES /// GRACE INERTIA Operating Temp. Range -30C to +105C Flammability UL 94 V0 CTI600V Agency Certifications UL, CSA GRACE INERTIA Connector Series Quick Reference Guide GRACE INERTIA PRODUCT OFFERING Centerline Positions Cap Housing Plug Housing Header Assembly Optional TPA 3.3 mm 4P - 1-1971905-2 1-1971906-2 1971904-2 3.3 mm 6P - 1-1971905-3 1-1971906-3 1971904-3 3.3 mm 8P - 1-1971905-4 1-1971906-4 1971904-4 3.3 mm 10P - 1-1971905-5 1-1971906-5 1971904-5 3.3 mm 12P - 1-1971905-6 1-1971906-6 1971904-2 3.5 mm 2P 2-1565085-3 2-1565081-3 - 1565089-1, 5-1565089-1 3.5 mm 2P 3-1565085-4 3-1565081-4 - 1565089-1, 5-1565089-1 3.5 mm 2P 1-1565085-2 1-1565081-2 - 1565089-1, 5-1565089-1 3.5 mm 2P 1565085-1 1565081-1 - 1565089-1, 5-1565089-1 3.5 mm 3P 2-1565086-3 2-1565082-3 - 1565090-1, 5-1565090-1 3.5 mm 3P 3-1565086-4 3-1565082-4 - 1565090-1, 5-1565090-1 3.5 mm 3P 1565086-1 1565082-1 - 1565090-1, 5-1565090-1 3.5 mm 4P 1565087-1 1565083-1 - 1565089-1, 5-1565089-1 3.5 mm 6P 1565088-1 1565084-1 - 1565090-1, 5-1565090-1 6.0 mm 2P - 2-2232875-1 2-2232876-1 - 6.0 mm 3P - 3-2232875-1 3-2232876-1 - 6.2 mm 1P 1903684-1 1903683-1 - - 6.2 mm 2P 1746977-1 1746975-1 - - 6.2 mm 3P 1746978-1 1871867-1 - - 6.5 mm 3P - 1747047-1 1747049-1 - 7.92 mm 2P - 3-1747050-1 3-1747052-1 - 7.92 mm 2P - 1747050-1 1747052-1 - 7.92 mm 2P - 3-1747050-4 3-1747052-4 - 9.0 mm 3P - 1-1903414-1, -2* 1-1903415-1 2232563-1 9.0 mm 3P - 1903414-1, -2* 1903415-1 2232563-1 9.0 mm 3P - 2-1903414-1, -2* 2-1903415-1 2232563-1 12.4 mm 2P - 1747995-1 1747996-1 1-2232564-1 12.4 mm 2P - 1747995-2 1747996-2 1-2232564-1 12.4 mm 2P - 1747995-3 1747996-3 1-2232564-1 *Models with "-2" suffix on part number accommodate optional TPA. Please note that this is only a small selection of GRACE INERTIA series products. There are a number of additional configurations available including various colors, keying options, and double lock plates where applicable. To see a complete selection of GRACE INERTIA product visit TE.com or contact your sales representative for more information. APPLIANCES /// GRACE INERTIA PAGE 2 GRACE INERTIA Connector Series Quick Reference Guide GRACE INERTIA RECEPTACLE & TAB OFFERING Centerlines Part Number Type Wire Size AWG Applicator Hand Tool 3.3mm 1612334-1 Receptacle 26-22 1596591-2 - 3.3mm 1612335-1 Tab 26-22 1596591-1 - 3.5mm 1565079-1 Receptacle 22-18 1463445-2 1596277-1 3.5mm 1565080-1 Tab 22-18 1463445-2 1596277-1 6.0mm 1376347-1 Receptacle 20-16 1366703-2 1729064-1 6.0mm 1376348-1 Receptacle 24-20 1463049-2 - 6.2mm 1746973-1 Tab 16-14 1729410-2 1729675-1 6.2mm 1746974-1 Tab 14-12 1729409-2 1729674-1 6.2mm, 9.0mm, 12.4mm 1746971-1 Receptacle 16-14 1729410-2 1729675-1 6.2mm, 9.0mm, 12.4mm 1746972-1 Receptacle 14-12 1729409-2 1729674-1 GRACE INERTIA TECHNICAL SPECIFICATIONS Centerlines 108 Specification 114 Specification 3.3mm 108-78231 114-5372 3.5mm 108-5810 114-5306 6.0mm 108-106193 114-5292 6.2mm 108-5979 114-5356 6.5mm & 7.92mm 108-5990 114-5292 9.0mm 108-78357 114-5356 12.4mm 108-78232 114-5356 APPLIANCES /// GRACE INERTIA PAGE 3 GRACE INERTIA Connector Series Quick Reference Guide DESIGN-IN QUESTIONS 1. Would you like to help ensure complete mating of the connectors in your application? 5. How many positions do you need, and do you need a wireto-wire or wire-to-board connector? The GRACE INERTIA connector series mates to simultaneously complete the circuit and then locks for in-connector mating reliability. The GRACE INERTIA connector series offers both wire-towire and wire-to-board configurations depending on the centerline. These configurations are available in various positions depending on the centerline selected. Refer to page 1 of the quick reference guide to see the positions available for each centerline. Furthermore, visual inspection for half mating is difficult and is a cause of complicated inspection processes. The GRACE INERTIA connector series uses a lock-on mechanism that does not pass an electric current if it is half mated. This makes it possible to detect half mated connections during an electrical conductivity test, which enables you to help prevent defective products caused by half mating. 2. For what type of application are you seeking a connector? These connectors can be used in a wide range of products from home appliances to vending machines and are a solution that can help eliminate human error during assembly. 3. What are the current and voltage requirements for your application? GRACE INERTIA connectors have varying current and voltage requirements for the various centerline options. Refer to the chart on page 1 of the quick reference guide to view the current and voltage capabilities of our various centerline options. 4. What are the wire size and type requirements? GRACE INERTIA connectors accept wire sizes from #26 to #12 AWG, varying on number of positions and centerline pitch. A table on page 1 of the quick reference guide provides an overview. Details about wire size can be found in the 108 product specifications and 114 application specifications accessible on te.com. Contact your sales representative for more information. 6. What are the operating temperature requirements? The GRACE INERTIA connector series has an operating temperature range from -30C to +105C. 7. Is contact back-out a concern? To ensure the contacts are seated, the GRACE INERTIA connector series offers optional double lock plates in the 3.3mm and 3.5mm centerline options. Additional double lock plate options are coming soon. Talk to your sales representative for more information. 8. Do you need to differentiate this connector from other connectors in the application? The GRACE INERTIA connector series offer multiple options of colored housings (natural, red, blue, and yellow) for easier connector identification during manufacturing and assembly. Multiple keying options are also offered to prevent mismating between the various plug and header/cap options. 9. Will you be applying a conformal coating to your PC board? GRACE INERTIA headers are designed to be compatible with various board coatings. TE TECHNICAL SUPPORT CENTER USA: +1 (800) 522-6752 Latin/S. America +54 (0) 11-4733-2200 France: +33 (0) 1-3420-8686 Canada: +1 (905) 475-6222 Germany: +49 (0) 6251-133-1999 Netherlands: +31 (0) 73-6246-999 Mexico: +52 (0) 55-1106-0800 UK: +44 (0) 800-267666 China: +86 (0) 400-820-6015 te.com GRACE INERTIA, TE, TE Connectivity, TE Connectivity (logo) and Every Connection Counts are trademarks. All other logos, products and/or company names referred to herein might be trademarks of their respective owners. The information given herein, including drawings, illustrations and schematics which are intended for illustration purposes only, is believed to be reliable. However, TE Connectivity makes no warranties as to its accuracy or completeness and disclaims any liability in connection with its use. TE Connectivity`s obligations shall only be as set forth in TE Connectivity`s Standard Terms and Conditions of Sale for this product and in no case will TE Connectivity be liable for any incidental, indirect or consequential damages arising out of the sale, resale, use or misuse of the product. Users of TE Connectivity products should make their own evaluation to determine the suitability of each such product for the specific application. (c) 2018 TE Connectivity Ltd. family of companies 1-1773883-5 03/18 Revised APPLIANCES /// GRACE INERTIA All Rights Reserved.