Electrical Products Division
6801 River Place Blvd.
Austin, TX 78726-9000
http://www.3M.com/elpd Litho in USA.
© 3M 2002 78-8126-0407-8-A
IMPORTANT NOTICE
Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability
associated with such use.
Warranty; Limited Remedy; Limited Liability. This product will be free from defects in material and manufacture as of the date of
purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above,
your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except
where prohibited by law, 3M will not be liable for any loss or damage arising from this 3M product, whether direct, indirect,
special, incidental or consequential regardless of the legal theory asser ted.
Engineering Specification
Crimp-Type Female Disconnects shall, electrically and
mechanically, connect permanently to the prestripped
end of a stranded copper wire: and have a tongue
portion with fingers which grip a Male Disconnect in a
separable, reusable manner, forming a Quick Connect
W iring Termination.
The connector line shall offer tongue variations (sized
to 0.250˝ x 0.032˝ or 0.187˝ x 0.020˝ per ANSI/NEMA
CD-2) and barrel variations in wire (AWG) size
(22-18, 16-14, 12-10) and construction (non-insulated,
nylon-insulated with insulation grip, and nylon fully
insulated insulated, etc.). The Female Disconnects
shall have regulatory agency coverage (UL Listing,
CSA Certified). The tongue portion shall be marked
with the wire range and manufacturer’s symbol ().
The Nylon Insulated 0.187˝ Female Disconnect, with
Insulation grip, shall be tin plated 0.016˝ thick brass,
with a tongue for gripping a 0.187˝ Male Tab per
ANSI/NEMA CD-2 and a 0.250˝ long barrel with a tin
plated brass funnel entry insulation grip, covered by a
molded nylon sleeve, color coded and sized for a
specified (AWG) wire range (22-18, 16-14).
Insulated connectors shall be UL Listed and CSA
Certified for 600 V building wire: 1000V signs or
lighting fixtures (luminaires) and temperature rated
221˚F, (105˚C) maximum.
Female Disconnects shall be suitable for field or
factory wiring, with a UL Recognized strain relief
required.
3M and Scotchlok are trademarks of 3M.
is a trademark of Underwriters Laboratories.
is a trademark of Canadian Standards Association.